Effect of flow rate on growth and oxygen consumption of biofilm in gravity sewer

Effects of flow rate and wastewater concentration on the transformation of nitrogen in sediment-water system of sewage pipelines

In this work, the transformation law of nitrogen in sediment-water system under different flow rates and wastewater concentrations were investigated in a simulated sewage pipeline system. Results showed that the different flow rates and wastewater concentrations in the pipeline caused differences in microbial community in sediments and nitrogen transformation. When the flow rate increased from 0.05 to 0.2 m/s, the scouring effect was enhanced, resulting in higher concentrations of NH4 + -N and NO3 - -N in the overlying water. At 0.2 m/s, the relative abundance of Clostridium_sensu_stricto_1 in sediments was higher, resulting in a greater conversion of amino acid nitrogen (AAN) to NH4 + -N. Meanwhile, many denitrifying bacteria (Trichococcus, Dechloromonas, norank_f__norank_o__Gaiellales, Thiobacillus) had high relative abundance in the sediments, and the denitrification process was common. When the wastewater concentration was high, the nitrification reaction was great in overlying and interstitial water. Moreover, the ammoniation process was great in the sediments, and the variation flux of AAN was large (remarkably reduced). PRACTITIONER POINTS: AAN transformed to NH4 + -N in sediment under different flow rate and concentration. Scouring was enhanced at 0.2 m/s, increasing nitrogen contents in overlying water. Difference in microbial community led to more AAN conversion to NH4 + -N at 0.2 m/s. The ammoniation process was greater in sediment at a high concentration of sewage. NH4 + -N migrated from overlying water to sediment at a high concentration of sewage.

Impacts of hydraulic conditions on microplastics biofilm development, shear stresses distribution, and microbial community structures in drinking water distribution pipes

Both microplastic and biofilm are contamination sources in drinking water, but their integrated impacts on water quality have been rarely studied, especially in drinking water distribution pipes with complex hydraulic conditions. This study explored the impacts of hydraulic conditions (0-2 m/s) on microplastic biofilm (MP-BM) development, shear stresses distribution, and microbial community structures. The research was conducted for two weeks using a pilot test device to simulate practical water pipes. The following were the primary conclusions: (1) According to morphology analysis, clusters (>5 μm) significantly increased in the plastisphere when the flow velocity ranged from 0.55 m/s to 0.95 m/s, and average size of clusters decreased when the flow velocity ranged from 1.14 m/s to 1.40 m/s (2) Characteristics of MP-BM impact shear stress on both plastisphere and pipe wall biofilm. Shear stresses were positively correlated with flow velocity, number of MP-BM, and size of MP-BM, while negatively correlated with diameters of pipes. (3) 31 genera changed strictly and monotonously with the fluid velocity, accounting for 15.42%. Opportunistic pathogens in MP-BM such as Sediminibacterium, Curvibacter, and Flavobacterium were more sensitive to hydraulic conditions. Moreover, microplastics (<100 μm) deserve more attention to avoid human ingestion and to prevent mechanical damage and bio-chemical risks.

Biofilm development in a pilot-scale gravity sewer: Physical characteristics, microstructure, and microbial communities

The existence of abundant biofilms on sewer pipeline walls can lead to negative environmental impacts, such as poisonous gas release and pipe corrosions through transforming various pollutants. Investigating the formation process of sewer biofilms is of importance in advancing knowledge of sewer operation and maintenance. In this study, the changes in physical characteristics, microstructure, and microbial communities of sewer biofilm were analyzed in-depth in a pilot-scale gravity sewer during a 45-day operation. The results show that a high specific surface area at the early stage could channel the substrates for stimulating the primary colonizers (e.g., Cytophagia, Sphingobacteriia, Alpha-, and Betaproteobacteria), which could excrete an extracellular matrix to facilitate biofilm growth. The sewer biofilms were gradually formed with 62 g VS/m² organic content, 1.2 mm biofilm thickness, and 89 mg/cm³ dry density after 45 days operation. Moreover, the biofilm growth promoted the emergence of facultative bacteria and anaerobes (affiliated with Flavobacteriia, Gemmatimonadetes, Deltaproteobacteria, and Epsilonproteobacteria). Microelectrode analysis further verified that an anaerobic zone existed in mature biofilm with a negative oxidation-reduction potential (-105 mV), where approximately 0.1 μmol/L of sulfide was produced. Our results suggest that the migration of the microbial community correlated with the changes in the evolved physical characteristics and microstructure of sewer biofilm, and this can contribute to the strategies for sulfide control for improving sewer maintenance.

Effect of hydraulic conditions on the prevalence of antibiotic resistance in water supply systems

The incidence of antibiotic resistance genes (ARGs) in tap water leads to potential risks to human health and draws more and more attention from the public. However, ARGs harbored in drinking water remain largely unexplored. In this study, a simulated water supply system was designed to study the effects of different pipe flow rates on the transmission of antibiotic resistance in water supply systems. We observed that the biofilm in low flow rate pipeline (0.1 m/s, 0.3 m/s) had higher concentration of both antibiotic resistant bacteria (ARB) and ARGs, while high flow rate (0.5 m/s and 0.7 m/s) resulted in low relative abundance of ARB and high relative abundance of ARGs in biofilms. The results showed that the high flow rate led to an abundance in non-culturable bacteria and a scarcity of nutrients in the biofilm, giving rise to its antibiotic resistance. High-throughput sequencing pointed out that the high content of Caulobacteraceae and Paenibacillus were determined in biofilms of high flow rate pipelines. Similarity analysis of microbial community composition of inlet water (IW), biofilms and outlet water (OW) showed that the composition of microbial community in OW was more similar to that in biofilms than in IW. Genera of bacteria in biofilms and OW (Brevundimonas, Brevibacillus and Pseudomonas) which had relationship with sulⅠ, sulⅡ in biofilms (P < 0.05) had higher relative abundance than that in IW. Different flow rate conditions had an impact on the biomass, microbial community, ARB and ARGs composition of biofilms. Thus, the detachment of biofilms can increased the antibiotic resistance of the water.

Effects of food waste addition on biofilm formation and sulfide production in a gravity sewer

The conversion of food waste (FW) into the sewage system is regarded as a promising method of relieving the burden of solid waste management. However, knowledge about its effects on sewer processes is limited, particularly in terms of biofilm formation and sulfide production. In this study, a gravity sewer system was set up to investigate the effects of the addition of FW on biofilm formation, the sulfate-reducing bacteria (SRB) population, and the sulfide production potential. The sewer biofilm characteristics changed with long-term FW addition, and a greater thickness (by 32%), an increased dry density (by 13%), and more extracellular polymeric substance (by 141%) were observed. The thicker and denser biofilm limited oxygen diffusion, enlarged the anaerobic area in the sewer biofilm, promoted an increase in the SRB population, and enhanced the sulfide production potential in the gravity sewer. Substantial differences in the H₂S profiles in the biofilm samples with and without the addition of FW were observed via microelectrode analysis. A model-based investigation of sewer biofilm formation with and without the addition of FW was conducted with a dynamic sewer biofilm model to gain further insights into sewer biofilm processes. The results suggest that the addition of FW can promote sulfide production and SRB growth in a sewer biofilm, which can be significantly affected by the ratio of FW to sewage. It is worth further investigations of the impacts of FW addition on the potential sulfide production in pressure sewers.

Wastewater microbial community structure and functional traits change over short timescales

Wastewater contains microorganisms coming from various sources, e.g. feces discharges, soil infiltrations and sewer biofilms and sediments. The primary objective of this work was to determine if end-of-pipe wastewater microbial community structures exhibits short-timescale variation, and assess possible microbial origins. To this end, we measured hourly physicochemical characteristics of wastewater influent for 2 days and analyzed the microbial community at 4-h intervals using 16S rRNA gene amplicon sequencing. Results showed large variations in the microbial community composition at phylum and genus levels, i.e. Proteobacteria ranged from 44 to 63% of the total relative abundance and Arcobacter ranged from 11 to 22%. Diurnal patterns were observed in the alpha-diversity, beta-diversity and the prevalence of several taxa. Wastewater physicochemical characteristics explained 61% of the total microbial community variance by Canonical Correspondence Analysis (CCA), with flow rate being the main explanatory variable exhibiting a clear diurnal profile. Comparison with public databases using closed reference OTUs revealed that only 7.3% of the sequences were shared with human gut microbiota and 21.7% with soil microbiota, the majority being from the sewer biofilms and sediments. The functional trait, weighted average ribosomal RNA operon (rrn) copy number per genome, was found to be relatively high in the wastewater microbiota (average 3.6, soil 2.1, and human gut 2.6) and significantly correlated with flow, inferring active microbial enrichments in the sewer. The prevalence of Methylophilaceae, methanol oxidation genes and denitrification genes were related to high influent methanol and NO₃^- concentration in the influent wastewater. These functional organisms and genes indicate important carbon and nutrient removal related functions in the sewer. Together, the observed temporal patterns of the microbial community and functional traits suggest that high wastewater flow causes greater transport of active sewer microorganisms which are functionally important.

Modeling of methane formation in gravity sewer system: the impact of microorganism and hydraulic condition

Sewer system is an important source of methane formation and emission. Although some models were developed to predict methane production in sewers, the impact of microorganism amount was indicated indirectly. Here, seven laboratory scale sewers with varied wall-shear stresses were established. The biofilm thickness, microorganism amount, DO distribution, microorganism community in the biofilms and methane production in the sewers were measured. Based on experimental data, an empirical model was developed to directly describe the relationship between methane production, microorganism amount and wall-shear stress. The results showed that DO concentration decreased significantly along the biofilm depth under varied wall-shear stress, and the DO reduction rate was positively related to the intensity of wall-shear stress. The dominant archaea species in mature biofilms were similar whereas the proportions showed remarkable differences. The abundance of Methanospirillum in biofilms cultured at 2.0 Pa wall-shear stress was 53.08% more than that at 1.29 Pa. The maximum methane production rate, 2.04 mg/L wastewater day, was obtained when the wall-shear stress kept at 1.45 Pa, which was 1.2-fold higher than the minimum in sewer at 0.5 Pa. The R² value of the established model was 0.95, the difference between the measurement and simulation was in the rage of 1.5–13.0%.

A new method to measure and model dynamic oxygen microdistributions in moving biofilms

Biofilms in natural environments offer a superior solution to mitigate water pollution. Artificially intensified biofilm reactors represented by rotating biological contactors (RBCs) are widely applied and studied. Understanding the oxygen transfer process in biofilms is an important aspect of these studies, and describing this process in moving biofilms (such as biofilms in RBCs) is a particular challenge. Oxygen transfer in RBCs behaves differently than in other biological reactors due to the special oxygen supply mode that results from alternate exposure of the biofilm to wastewater and air. The study of oxygen transfer in biofilms is indispensable for understanding biodegradation in RBCs. However, the mechanisms are still not well known due to a lack of effective tools to dynamically analyze oxygen diffusion, reaction, and microdistribution in biofilms. A new experimental device, the Oxygen Transfer Modeling Device (OTMD), was designed and manufactured for this purpose, and a mathematical model was developed to model oxygen transfer in biofilm produced by an RBC. This device allowed the simulation of the local environment around the biofilm during normal RBC operation, and oxygen concentrations varying with time and depth in biofilm were measured using an oxygen microelectrode. The experimental data conformed well to the model description, indicating that the OTMD and the model were stable and reliable. Moreover, the OTMD offered a flexible approach to study the impact of a single-factor on oxygen transfer in moving biofilms. In situ environment of biofilm in an RBC was simulated, and dynamic oxygen microdistributions in the biofilm were measured and well fitted to the built model description.

Spatial Organization Plasticity as an Adaptive Driver of Surface Microbial Communities

Biofilms are dynamic habitats which constantly evolve in response to environmental fluctuations and thereby constitute remarkable survival strategies for microorganisms. The modulation of biofilm functional properties is largely governed by the active remodeling of their three-dimensional structure and involves an arsenal of microbial self-produced components and interconnected mechanisms. The production of matrix components, the spatial reorganization of ecological interactions, the generation of physiological heterogeneity, the regulation of motility, the production of actives enzymes are for instance some of the processes enabling such spatial organization plasticity. In this contribution, we discussed the foundations of architectural plasticity as an adaptive driver of biofilms through the review of the different microbial strategies involved. Moreover, the possibility to harness such characteristics to sculpt biofilm structure as an attractive approach to control their functional properties, whether beneficial or deleterious, is also discussed.