Characteristics and mechanisms of cadmium adsorption from aqueous solution using lotus seedpod-derived biochar at two pyrolytic temperatures

Role of phosphorus on the biogeochemical behavior of cadmium in the contaminated soil under leaching and pot experiments

Phosphorus (P) is involved in various biochemical reactions in plant growth, so it is beneficial to plants growing in soils contaminated by metals, including cadmium (Cd). However, few studies have reported on the mechanistic roles of P in mitigating Cd toxicity to ryegrass root, and especially in alleviating the disruption of the mitochondrial function of living cells. In this study, the physiological and biochemical mechanisms associated with ryegrass growth under various Cd and P treatments were investigated using leaching and pot systems. The concentration of Cd in soil leachates showed a significantly positive relationship with redox potential (P < 0.05), but negative relationship (P < 0.05) with leachate pH values and dissolved organic carbon (DOC), indicating that exogenous P addition (as H2PO4-) may decrease Cd leaching from contaminated soil. Compared to the control (without P addition), the cumulative Cd content was reduced by 53.3% and 64.5% in the soil leachate with exogenous P application (20 mg/L and 80 mg/L), respectively. Notably, application of P decreased the Cd concentrations in the symplastic fractions and increased the Cd concentrations in the apoplastic fractions in root tips, which may help to alleviate Cd stress to the protoplast. Moreover, exogenous P was found to play a positive role in mitochondrial function and Ca2+ variation in root cells under Cd stress, which provides novel insights into the mechanisms of exogenous P in alleviating plant Cd injury.

Lotus (Nelumbo nucifera): a multidisciplinary review of its cultural, ecological, and nutraceutical significance

This comprehensive review systematically examines the multifarious aspects of Nelumbo nucifera, elucidating its ecological, nutritional, medicinal, and biomimetic significance. Renowned both culturally and scientifically, Nelumbo nucifera manifests remarkable adaptability, characterized by its extensive distribution across varied climatic regions, underpinned by its robust rhizome system and prolific reproductive strategies. Ecologically, this species plays a crucial role in aquatic ecosystems, primarily through biofiltration, thereby enhancing habitat biodiversity. The rhizomes and seeds of Nelumbo nucifera are nutritionally significant, being rich sources of dietary fiber, essential vitamins, and minerals, and have found extensive culinary applications. From a medicinal perspective, diverse constituents of Nelumbo nucifera exhibit therapeutic potential, including anti-inflammatory, antioxidant, and anti-cancer properties. Recent advancements in preservation technology and culinary innovation have further underscored its role in the food industry, highlighting its nutritional versatility. In biomimetics, the unique "lotus effect" is leveraged for the development of self-cleaning materials. Additionally, the transformation of Nelumbo nucifera into biochar is being explored for its potential in sustainable environmental practices. This review emphasizes the critical need for targeted conservation strategies to protect Nelumbo nucifera against the threats posed by climate change and habitat loss, advocating for its sustainable utilization as a species of significant value.

Efficient removal of Cd(II) and Pb(II) from aqueous solution using biochars derived from food waste

Massive amount of food waste has been generated annually, posing a threat to ecological sustainability and the social economy due to current disposal methods. Urgent action is needed worldwide to convert the traditional pathway for treating food waste into a sustainable bioeconomy, as this will significantly benefit food chain management. This study explores the use of pyrolysis to produce different types of food waste biochars and investigates their adsorption capabilities for removing Cd2+ and Pb2+ in aqueous solution. The results indicated that co-pyrolysis biochar from fresh food waste and rice husk (FWRB) exhibited superior adsorption performance for Cd2+ (61.84 mg·g-1) and Pb2+ (245.52 mg·g-1), respectively. Pseudo-second-order kinetics (0.74 ≤ R2 ≤ 0.98) and Langmuir isotherms (0.87 ≤ R2 ≤ 0.98) indicated that the immobilized Cd2+ and Pb2+ on biochars were mainly attributed to the chemisorption, including precipitation with minerals (e.g., carbonates, silicates, and phosphate), complexation with functional groups (-OH), cation exchange (-COO-), and coordination with π-electrons. Furthermore, FWRB demonstrated reduced EC and Na content in comparison to food waste digestate biochar (FWDB) and food waste digestate co-pyrolysis with sawdust biochar (FWSB), with levels of Cd and Pb falling below China's current guideline thresholds. These findings suggested that co-pyrolysis of fresh food waste with rice husk could be applicable to the recycling of food waste into biochar products for heavy metal stabilization in contaminated water and soils.

Enhanced adsorption for trivalent antimony by nano-zero-valent iron-loaded biochar: performance, mechanism, and sustainability

The discharge of tailing leachate and metallurgical wastewater has led to an increasing trend of water pollution. In this study, nZVI-modified low-temperature biochar was used to adsorb Sb(III) from water. The adsorption capacity and speed of nZVI-BC were better than those of BC, and the best adsorption effect was observed for 4nZVI-BC, with 93.60 mg·g-1 maximum adsorptive capacity, which was 208.61% higher than the original BC. The Langmuir and Temkin models were well fitted (R2 ≥ 0.99), and PSO was more in line with the 4nZVI-BC adsorption process, indicating that the adsorption was a monolayer physico-chemical adsorption. The combination of XRD, FTIR, and XPS characterization demonstrated that the adsorption mechanism predominantly included redox reactions, complexation, and electrostatic interactions. The thermodynamic results demonstrated that 4nZVI-BC adsorption on Sb(III) was a spontaneous endothermic process. Additionally, the order of the influence of interfering ions on 4nZVI-BC was CO32-  > H2PO4-  > SO42-  > Cl-. After three repeated uses and adsorption-desorption, the adsorption ratio of Sb(III) by 4nZVI-BC was still as high as 90% and 65%, respectively. This study provides a theoretical reference for the exploration and development of Sb(III) removal technologies for aquatic environments.

Effect of Different Modification Methods on the Adsorption of Manganese by Biochar from Rice Straw, Coconut Shell, and Bamboo

The adsorption capacity of pristine biochar without modification is usually low. In this experiment, we comprehensively evaluated the adsorption of Mn(II) by biochar with different modification methods from different biomass. The biochar from rice straw, coconut shell, and bamboo was produced by pyrolysis at 600 °C under nitrogen and then modified with HNO3, NaOH, and Na2S, respectively. The results showed that the adsorption capacities of these modified biochar samples were in the order Biochar-NaOH > Biochar-Na2S > Biochar-HNO3. Among the three modification methods, biochar modified with NaOH is the optimum for the adsorption of Mn(II). However, the same method of modification has different effects on different biomass feedstocks. Rice straw: R-C > R-NaOH-C > R-Na2S-C > R-HNO3-C; coconut shell: C-NaOH-C > C-Na2S-C > C-HNO3-C > C-C; bamboo: B-NaOH-C > B-Na2S-C > B-C > B-HNO3-C. At the pH of 5 and 30 °C, R-C, C-NaOH-C, and B-NaOH-C showed the highest maximum adsorption capacity for Mn(II). Equilibrium data were evaluated by Langmuir, Freundlich, and Temkin isotherm models, and the results suggested that the Langmuir model is the most suitable to expound the adsorption behavior of Mn(II) on R-C, C-NaOH-C, and B-NaOH-C. Overall, the results from this work suggest that the key for preparing biochar adsorbents with high capacity is to choose the appropriate biomass feedstock and modification method.

Magnetic Activated Carbon from ZnCl2 and FeCl3 Coactivation of Lotus Seedpod: One-Pot Preparation, Characterization, and Catalytic Activity towards Robust Degradation of Acid Orange 10

Lotus seedpods (LSPs) are an abundant and underutilized agricultural residue discarded from lotus seed production. In this study, ZnCl₂ and FeCl₃ coactivation of LSP for one-pot preparation of magnetic activated carbon (MAC) was explored for the first time. X-ray diffraction (XRD) results showed that Fe₃O₄, Fe⁰, and ZnO crystals were formed in the LSP-derived carbon matrix. Notably, transmission electron microscopy (TEM) images showed that the shapes of these components consisted of not only nanoparticles but also nanowires. Fe and Zn contents in MAC determined by atomic absorption spectroscopy (AAS) were 6.89 and 3.94 wt%, respectively. Moreover, S_BET and V_total of MAC prepared by coactivation with ZnCl₂ and FeCl₃ were 1080 m²/g and 0.51 cm³/g, which were much higher than those prepared by single activation with FeCl₃ (274 m²/g and 0.14 cm³/g) or ZnCl₂ (369 m²/g and 0.21 cm³/g). MAC was subsequently applied as an oxidation catalyst for Fenton-like degradation of acid orange 10 (AO10). As a result, 0.20 g/L MAC could partially remove AO10 (100 ppm) with an adsorption capacity of 78.4 mg/g at pH 3.0. When 350 ppm H₂O₂ was further added, AO10 was decolorized rapidly, nearly complete within 30 min, and 66% of the COD was removed in 120 min. The potent catalytic performance of MAC might come from the synergistic effect of Fe⁰ and Fe₃O₄ nanocrystals in the porous carbon support. MAC also demonstrated effective stability and reusability after five consecutive cycles, when total AO10 removal at 20 min of H₂O₂ addition slightly decreased from 93.9 ± 0.9% to 86.3 ± 0.8% and minimal iron leaching of 1.14 to 1.19 mg/L was detected. Interestingly, the MAC catalyst with a saturation magnetization of 3.6 emu/g was easily separated from the treated mixture for the next cycle. Overall, these findings demonstrate that magnetic activated carbon prepared from ZnCl₂ and FeCl₃ coactivation of lotus seedpod waste can be a low-cost catalyst for rapid degradation of acid orange 10.

Adsorption of sulfanilamides using biochar derived from Suaeda salsa: adsorption kinetics, isotherm, thermodynamics, and mechanism

Suaeda biochar (SBC) was prepared by muffle furnace with Suaeda salsa at 600, 700, 800, and 900 ℃. The physical and chemical properties of biochar at different pyrolysis temperatures and the adsorption mechanism of sulfanilamide (SM) were studied by SEM-EDS, BET, FTIR, XRD, and XPS analysis. The adsorption kinetics and adsorption isotherms were fitted. The results showed that the kinetics was in line with the quasi-second-order adsorption model and belonged to chemisorption. The adsorption isotherm conformed to Langmuir adsorption isotherm model and belonged to monolayer adsorption. The adsorption of SM on SBC was spontaneous and exothermic. The adsorption mechanism may be pore filling, hydrogen bonding, and π-π electron donor acceptor (EDA) interaction.

Evaluation and characterization of biochar on the biogeochemical behavior of polycyclic aromatic hydrocarbons in mangrove wetlands

As the inter-tidal regions between land and ocean, mangrove ecosystems have high polycyclic aromatic hydrocarbons (PAHs) content, and the over accumulation of PAHs in mangrove wetland poses a serious ecological risk to the health of plant and living creatures. Comparison to the agricultural sources -biochar, biochar produced from wetland plant has lower O/C (molar ratio), larger N contents, higher stability and more benefits. However, whether the rhizosphere action occurs in biochar- amended sediment and how to influence the biogeochemical behavior of PAH have rarely been reported. In this context, a leaching procedure and pot experiment (60-d) were performed on migration and transformation of PAH at the sediment, and toxicity and their bioavailability in plant affected by the presence of Kandelia obovate-derived biochar in Southeast China. Root exudates amendments significantly increased the cumulative leaching-loss of pyrene by 36-51 % with or without biochar amendment via continuous diffusion and partition process, and biochar amendments decreased the bioavailability of pyrene (16.8-25.8 %) probably due to a faster pyrene sorption on inter-phase transport against desorption. The regression analysis indicated a significant relationship (p < 0.05) between leachate pH and pyrene concentrations. Notably, the bioaccumulation of pyrene on K. obovate parts had significant negative correlation (p < 0.05) to biochar. The activities of four key antioxidizes (phenylalanine ammonia-lyase, dismutases, peroxidases and catalases) were significantly decreased with the application of biochar. Moreover, biochar plays a positive role in cytochrome C release and phosphatidylserine secretion, and a combined biochar-rhizosphere approach can improve the stress tolerance and resistance of K. obovate with an enhanced synergetic effect, which could be a feasible remediation strategy for alleviating the mangrove sediment contaminated by PAH.

Exploration on the role of different iron species in the remediation of As and Cd co-contamination by sewage sludge biochar

Numerous studies have explored the adsorption of cadmium (Cd) and arsenic (As) by iron (Fe)-modified biochar, but few studies have examined in-depth the similarities and differences in the adsorption behavior of different iron types on Cd and As. In this study, sewage sludge biochar (BC) was co-pyrolyzed with self-made Fe minerals (magnetite, hematite, ferrihydrite, goethite, and schwertmannite) to treat Cd and As co-contaminated water. The adsorption of Cd and As on the Fe-modified biochar was further analyzed by adsorption kinetics, adsorption isotherms, and adsorption thermodynamics combined with a series of characterization experiments. Both SEM-EDX and XRD results confirmed the successful loading of iron minerals onto BC. Both adsorption kinetics and adsorption isotherms experiments showed that the adsorption of Cd and As by BC and the other five Fe-modified biochar was mainly controlled by chemical interactions. The results also indicated that goethite biochar (GtBC) was the most effective for the adsorption of Cd among the five Fe-modified biochar. Ferrihydrite biochar (FhBC) formed more diverse complexes, coupled with the relatively stronger electrons accepting ability, thus making it more effective for As adsorption than the others. Additionally, GtBC and hematite biochar (HmBC) were found effective for the adsorption of both Cd and As, whereas MBC was not found effective for either metal. Furthermore, combined with XPS results, the adsorption of Cd by the materials was mainly governed by Cd²⁺-π interactions, complexation precipitation, and co-precipitation, while oxidation reactions also existed for As.

Remediation of cadmium-contaminated soil by micro-nano nitrogen-doped biochar and its mechanisms

Cadmium-contaminated soils are an urgent problem that needs to be solved in many countries and regions. In this study, a new heavy metal passivator, micro-nano nitrogen-doped biochar (Nm-NBC), was prepared by introducing nitrogen into biochar. Soybean was used as an experimental plant to compare the effects of corn straw biochar (CBC, not modified), ammonium chloride modified corn straw biochar (NBC), and micro-nano nitrogen-doped biochar (Nm-NBC) on the remediation of Cdcontaminated soil. The results showed that the biomass of soybean, pH, organic matter, and total nitrogen content of the Cd-contaminated soil significantly increased, and the available Cd in soil significantly reduced (P < 0.05) when CBC, NBC, and Nm-NBC were added. The effect was as follows: Nm-NBC > NBC > CBC; Nm-NBC had the best result. When 1% Nm-NBC added to the soil, the Cd content in beans reduced by 68.09%. BET, FTIR, XPS, and SEM were used to analyze the characteristics of Nm-NBC and its mechanisms in the remediation of Cd-contaminated soils. The results showed that Nm-NBC had larger specific surface area and abundant functional groups; -COOH and graphitic nitrogen in Nm-NBC can form Cd-O bond and Cd-π with Cd(II) in the soil. Therefore, Nm-NBC prepared by introducing nitrogen into biochar has a promising application in the remediation of Cd-contaminated soil.

Na4P2O7-Modified Biochar Derived from Sewage Sludge: Effective Cu(II)-Adsorption Removal from Aqueous Solution

With the rapid development of industrialization, the amount of copper-containing wastewater is increasing, thereby posing a threat to the aquatic ecological environment and human health. Sludge biochar has received extensive concern in recent years due to its advantages of low cost and sustainability for the treatment of heavy-metal-containing wastewater. However, the heavy-metal-adsorption capacity of sludge biochar is limited. This study prepared a sodium pyrophosphate- (Na4P2O7-) modified municipal sludge-based biochar (SP-SBC) and evaluated its adsorption performance for Cu(II). Results showed that SP-SBC had higher yield, ash content, pH, Na and P content, and surface roughness than original sewage sludge biochar (SBC). The Cu(II)-adsorption capacity of SP-SBC was 4.55 times than that of SBC at room temperature. For Cu(II) adsorption by SP-SBC, the kinetics and isotherms conformed to the pseudo-second-order model and the Langmuir–Freundlich model, respectively. The maximum adsorption capacity of SP-SBC was 38.49 mg·g−1 at 35°C. Cu(II) adsorption by SP-SBC primarily involved ion exchange, electrostatic attraction, and precipitation. The desired adsorption performance for Cu(II) in the fixed-bed column experiment indicated that SP-SBC can be reused and had good application potential to treat copper-containing wastewater. Overall, this study provided a desirable sorbent (SP-SBC) for Cu(II) removal, as well as a new simple chemical-modification method for SBC to enhance Cu(II)-adsorption capacity.

Comparison of cadmium adsorption by hydrochar and pyrochar derived from Napier grass

Biochar (e.g. pyrochar and hydrochar) is considered a promising adsorbent for Cd removal from aqueous solution. Considering the vastly different physicochemical properties between pyrochar and hydrochar, the Cd²⁺ sorption capacity and mechanisms of pyrochars and hydrochars should be comparatively determined to guide the production and application of biochar. In this study, the hydrochars and pyrochars were prepared from Napier grass by hydrothermal carbonization (200 and 240 °C) and pyrolysis (300 and 500 °C), respectively, and the physicochemical properties and Cd²⁺ sorption performances of biochars were systematically determined. The pyrochars had higher pH and ash content as well as better stability, while the hydrochars showed more oxygen-containing functional groups (OFGs) and greater energy density. The pseudo second order kinetic model best fitted the Cd²⁺ sorption kinetics data of biochars, and the isotherm data of pyrochar and hydrochar were well described by Langmuir and Freundlich models, respectively. In comparison with hydrochar, the pyrochar exhibited better Cd²⁺ sorption capacity (up to 71.47 mg/g). With increasing production temperature, the Cd²⁺ sorption capacity of pyrochar elevated, while the reduction was found for hydrochar. The mineral interaction, complexation with surface OFGs, and coordination with π electron were considered the main mechanisms of Cd²⁺ removal by biochars. The minerals interaction and the complexation with OFGs was the dominant mechanism of Cd²⁺ removal by pyrochars and hydrochars, respectively. Therefore, the preparation technique and temperature have significant impacts on the sorption capacity and mechanisms of biochar, and pyrochar has better potential for Cd²⁺ removal than the congenetic hydrochar.

Phytochemicals, biological activity, and industrial application of lotus seedpod (Receptaculum Nelumbinis): A review

Lotus (Nelumbo nucifera Gaertn.) is a well-known food and medicinal plant. Lotus seedpod (Receptaculum Nelumbinis) is the by-products during lotus products processing, which is considered as waste. Numerous studies have been conducted on its phytochemicals, biological activity and industrial application. However, the information on lotus seedpod is scattered and has been rarely summarized. In this review, summaries on preparation and identification of phytochemicals, the biological activities of extracts and phytochemicals, and applications of raw material, extracts and phytochemicals for lotus seedpod were made. Meanwhile, the future study trend was proposed. Recent evidence indicated that lotus seedpods extracts, obtained by non-organic and organic solvents, possessed several activities, which were influenced by extraction solvents and methods. Lotus seedpods were rich in phytochemicals categorized as different chemical groups, such as proanthocyanidins, oligomeric procyanidins, flavonoids, alkaloids, terpenoids, etc. These phytochemicals exhibited various bioactivities, including ameliorating cognitive impairment, antioxidation, antibacterial, anti-glycative, neuroprotection, anti-tyrosinase and other activities. Raw material, extracts and phytochemicals of lotus seedpods could be utilized as sources for biochar and biomass material, in food industry and as dye. This review gives well-understanding on lotus seedpod, and provides theoretical basis for its future research and application.

NaOH-assisted H2O2 post-modification as a novel approach to enhance adsorption capacity of residual coffee waste biochars toward radioactive strontium: Experimental and theoretical studies

In this study, NaOH-assisted H₂O₂ post-modification was proposed as a novel strategy to enhance the adsorption of radioactive strontium (Sr) onto residual coffee waste biochars (RCWBs). To validate its viability, the adsorption capacities and mechanisms of Sr(II) using pristine (RCWB_P), H₂O₂ post-modified (RCWB_HP), and NaOH-assisted H₂O₂ post-modified residual coffee waste biochars (RCWB_NHP) were experimentally and theoretically investigated. The highest adsorption capacity of Sr(II) for RCWB_NHP (10.91 mg/g) compared to RCWB_HP (5.57 mg/g) and RCWB_P (5.07 mg/g) was primarily attributed to higher negative surface zeta potential (RCWB_NHP = -5.66 → -30.97 mV; RCWB_HP = -0.31 → -11.29 mV; RCWB_P = 1.90 → -10.40 mV) and decoration of Na on the surfaces of RCWB_P via NaOH-assisted H₂O₂ post-modification. These findings agree entirely with the theoretical observations that the adsorption of Sr(II) onto RCWB_P and RCWB_HP was controlled by electrostatic interactions involving carbonyls whereas enriched carboxylic acids and decorated Na on the surfaces of RCWB_NHP through the replacement of Mg and K by NaOH-assisted H₂O₂ modification stimulated electrostatic interactions and cation exchanges governing the adsorption of Sr(II). Hence, NaOH-assisted H₂O₂ post-modification seemed to be practically applicable for improving the adsorption capacity of Sr(II) using RCWB-based carbonaceous adsorbents in real water matrices.

One-Step Synthesis of High-Performance N/S Co-Doped Porous Carbon Material for Environmental Remediation

Potassium thiocyanate (KSCN), a highly efficient “three birds with one stone” activator, might work with inorganic activators to produce excellent N/S co-doped porous carbon (NSC) materials for environmental remediation. However, the effects of inorganic activators on cooperative activation are unclear. As a result, the influence of inorganic activators on the synthesis of NSC materials was investigated further. This study shows that the surface areas of the NSC materials acquired through cooperative activation by potassium salts (KOH or K2CO3) were considerably higher than those acquired through KSCN activation alone (1403 m2/g). Furthermore, KSCN could cooperate with K2CO3 to prepare samples with excellent specific surface area (2900 m2/g) or N/S content. The as-prepared NSC materials demonstrated higher adsorption capability for chloramphenicol (833 mg/g) and Pb2+ (303 mg/g) (pore fitting, complexation). The research provides critical insights into the one-step synthesis of NSC materials with a vast application potential.

Qualitative and quantitative investigation on adsorption mechanisms of Cd(II) on modified biochar derived from co-pyrolysis of straw and sodium phytate

Developing effective modification methods and obtaining a comprehensive understanding of adsorption mechanisms are essential for the practical application of biochars for the removal of heavy metals from solutions. In this study, rice straw was impregnated with sodium phytate and pyrolyzed at 350 °C, 450 °C, and 550 °C to synthesize modified biochars (i.e., MBC350, MBC450, and MBC550). The Cd(II) adsorption capacities and contributions of different mechanisms, including the effects of biochar-derived dissolved organic matter (BDOM), were investigated using batch sorption experiments and characterization analyses. The modification of sodium phytate promoted the pyrolysis of biomass, thereby increasing the BDOM content and aromatic structures at low and high pyrolysis temperatures, respectively. Moreover, the modification also increased the exchangeable Na⁺ and carbonate contents in the modified biochars. Compared with the raw biochars, the Cd(II) adsorption capacities of modified biochars increased by 3.3-4.3 times, and MBC550 had the highest Cd(II) adsorption capacity (126.5 mg/g), of which precipitation with minerals and interaction with π-electrons contributed 41.7% and 45.8%, respectively. However, at a lower pyrolysis temperature, the Cd(II) adsorption attributed to ion exchange and co-deposition with BDOM significantly increased, especially on MBC350 (33.9 and 12.6 mg/g, respectively). These results indicate that modification by sodium phytate effectively enhanced various adsorption mechanisms, thereby increasing the Cd(II) adsorption capacity. In addition, the contribution of co-deposition with BDOM to adsorption was unneglectable for the biochars pyrolyzed at low temperatures.

Biochar nanoparticles with different pyrolysis temperatures mediate cadmium transport in water-saturated soils: Effects of ionic strength and humic acid

Biochar is advocated as an environment-friendly and cost-effective material for removing both heavy metals and organic contaminants in soil remediation. However, our understandings on the cotransport potential of contaminants with the nanoscale biochar downward along soil profiles (e.g., potential environmental risks towards groundwater) remain largely unknown. This study investigated the effects of wheat straw-derived biochar nanoparticles pyrolyzed at 350 °C and 500 °C (BNP350 and BNP500) on the transport of cadmium (Cd(II)) in water-saturated soil packed columns. Different ionic strengths (ISs) without/with humic acid (HA) were tested to mimic the scenarios during soil remediation. BNPs could act as a vehicle mediating Cd(II) transport in soils. At a low IS (1.0 mM KCl), compared to the limited transport of individual Cd(II), BNP500 enhanced (69 times) Cd(II) transport (Cd(II) mass recovery (M) = 7.59%) in soils, which was greater than that by BNP350 (54 times, M = 5.92%), likely due to the higher adsorption of Cd(II) onto BNP500. HA further increased the Cd(II) transport by BNPs (M = 8.40% for BNP350 and M = 11.95% for BNP500), which was mainly due to the increased mobility of BNPs carrying more absorbed Cd(II). In contrast, at a high IS (10 mM KCl), BNP500 dramatically inhibited the transport of Cd(II) (M = 12.9%), decreasing by about 61.6%, compared to the BNPs absence (M = 33.6%). This is because a large amount of BNP500-Cd(II) was retained in soils at a high IS. This inhibition effect of Cd(II) transport by BNPs was reinforced with the presence of HA. Our findings suggest that the pyrolysis temperature of biochar should be carefully considered when applying biochar for in-situ remediation of soils contaminated by heavy metals such as Cd(II) under various organic matter and IS conditions.

Biochar from constructed wetland biomass waste: A review of its potential and challenges

Constructed wetland is considered a promising approach for water remediation due to its high efficiency, low operation costs, and ecological benefits, but the large amounts of wetland plant biomass need to be properly harvested and utilized. Recently, wetland plant derived biochar has drawn extensive attention owing to its application potential. This paper provides an updated review on the production and characteristics of wetland plant derived biochar, and its utilization in soil improvement, carbon sequestration, environmental remediation, and energy production. In comparison to hydrothermal carbonization and gasification, pyrolysis is a more common technique to convert wetland plant to biochar. Characteristics of wetland plant biochars varied with plant species, growth environment of plant, and preparation conditions. Wetland plant biochar could be a qualified soil amendment owing to its abundant nutrients. Notably, wetland plant biochar exhibited considerable sorption capacity for various inorganic and organic contaminants. However, the potentially toxic substances (e.g. heavy metal and polycyclic aromatic hydrocarbons) retained in wetland plant biochar should be noticed before large-scale application. To overcome the drawbacks from the scattered distribution, limited productivity, and seasonal operation of constructed wetlands, the economic feasibility of wetland plant biochar production system could be improved via using mobile pyrolysis unit, utilizing local waste heat, and exploiting all the byproducts. Future challenges in the production and application of wetland plant derived biochar include the continuous supply of feedstock and proper handling of potentially hazardous components in the biochar.

Insights into effects of ageing processes on Cd-adsorbed biochar stability and subsequent sorption performance

The conversion of agricultural biomass wastes into biochar has enormous potential to improve soil quality. Particularly, biochar particles introduced into the natural environment readily bind environmental pollutants. The interaction of biochar and adsorbed pollutants will, however, be impacted by long term ageing. The mechanism of biochar adsorption performance that could be affected by such early-adsorbed pollutant is not understood. Herein, we study the effects of different ageing processes on Cd-adsorbed biochar stability by K₂CrO₇-H₂SO₄ oxidation method for carbon loss evaluation, and sorption capacity towards diethyl phthalate (DEP). We adopted artificially accelerated ageing methods to simulate various processes: HNO₃/H₂SO₄, H₂O₂ oxidative, leaching, high temperature, freeze-thaw cycles, and dry-wet cycles. The results showed that all the Cd-adsorbed aged biochars had more C-C/C-H functional groups and exhibited higher carbon stability than pristine aged biochars. Specially, the carbon loss (20.2-25.2%) of Cd-adsorbed biochar showed almost two times lower than pristine biochar (34.5-35.4%) after high temperature and leaching ageing due to enhancing Cd-π bonding, which could resist strong K₂Cr₂O₇/H₂SO₄ oxidation. Such interaction synergistically promoted the sequestration of adsorbed Cd on biochars. The subsequent sorption performance for DEP on Cd-adsorbed biochars was slightly higher than pristine biochar after H₂O₂ oxidative and leaching ageing. Whereas, the dominate mechanism of DEP removal on Cd-adsorbed biochars changed to hydrophobic partitioning after high temperature, freeze-thaw cycles and dry-wet cycles ageing, leading to a decreased DEP sorption capacity. Hence, the biochar application must be comprehensively considered the susceptibilities due to reciprocal effects of early adsorbed pollutant and natural ageing environment, which helps us both assess and take measures to minimize potential risks in the environment. The present study suggests the continuous irrigation and tropical or temperature climate regions would be suitable for long-term biochar application in soil remediation and carbon sequestration.

Characterization of pruned tea branch biochar and the mechanisms underlying its adsorption for cadmium in aqueous solution

In the present study, discarded pruned tea branch was used to prepare a new biochar, and the physicochemical properties and adsorption characteristics were investigated by characterization and batch experiments. With increasing pyrolysis temperature from 400 to 800 °C, the yield, specific surface area, and acidic functional groups had significant differences. The optimum adsorption conditions were determined as pH = 6 and dosage of 2 g L-1. The pseudo-second-order kinetic and Langmuir isothermal model could fit well to the adsorption data, which showed that the adsorption process was dominated by monolayer chemical adsorption. The highest adsorption property (74.04 mg g-1) was obtained by the pyrolysis of tea branch biochar (TBB) at 700 °C owing to the adsorption mechanisms, including surface complexation, precipitation, metal ion exchange, and Cd2+-π interaction. After five cycles of desorption, biochar still showed superior adsorption (80%). Hence, the TBB acted as a regenerable adsorbent for treating Cd2+-containing wastewater.

Rapid Separation and Efficient Removal of Cd Based on Enhancing Surface Precipitation by Carbonate-Modified Biochar

The high buoyancy of biochar makes its application difficult in Cd removal. In this paper, the content of minerals was increased by modifying carbonate on the biochar surface using the vacuum impregnation method. Enhancing surface precipitation between minerals and Cd introduced a correspondingly great number of Cd precipitates on the biochar surface, leading to the rapid precipitation and separation of buoyant biochar. The physical and chemical properties of carbonate-modified biochar and the adsorption mechanism of Cd were comprehensively studied by jar tests, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The results showed that the adsorption of Cd by carbonate-modified biochar was controlled by multiple mechanisms, including surface precipitation, surface complexation, and Cd-π interaction. Surface precipitation dominated the removal of Cd. The contributions of Cd removal mechanisms indicated that the contribution proportions of minerals increased from 89.73 to 97.9% when the pyrolysis temperature increased from 300 to 600 °C, while the contribution proportions of Cd-π binding decreased from 9.99 to 2.08%. Meanwhile, oxygen functional groups have only a marginal effect on Cd adsorption. Besides, the results revealed that the higher surface hydrophobicity and the lower polarity were conducive to biochar separation from water. The Cd removal method can provide efficient adsorption and rapid separation, making it possible to use biochar in water treatment.

Temperature-dependent magnesium citrate modified formation of MgO nanoparticles biochar composites with efficient phosphate removal

Nano-MgO biochar composites (nMBCs) have been considered as potential adsorbents for phosphate removal from aqueous solution. It is an effective strategy to improve P removal efficiency that adjustment of the size, distribution and crystallinity of MgO particles embedded into the carbon matrix. Herein, we prepared a highly efficient phosphate adsorbent by co-pyrolysis of lotus seedpod and magnesium citrate and studied its adsorption mechanisms. Results showed that the uniformly dispersed MgO nanoparticle was formed on the surface of nMBCs with the temperature increasing, with the particles size ranging from 3 to 10 nm. Furthermore, high temperature promoted the formation of a large amount of reactive lattice oxygen, which was demonstrated to be the main active adsorption site, thus the phosphate immobilization capacity of nMBCs was greatly improved with the pyrolysis temperature increasing from 450 °C to 750 °C. Besides, some stable CO bonds were formed due to the catalysis of Mg²⁺, which could bond to HPO₄^2-/H₂PO₄^- by hydrogen bond, enhancing the adsorption performance. The isotherm adsorption experiment showed that MBC-750 achieved an excellent phosphorus adsorption amount of 452.752 mg-P/g. The effectiveness of nMBCs is enhanced and a method for producing an effective nanocomposite adsorbent material for removing phosphate from wastewater is provided.

Preparation of magnetic hydrochar derived from iron-rich Phytolacca acinosa Roxb. for Cd removal

Considering that hyperaccumulators can accumulate high concentrations of iron salt, they can successfully obtain magnetic hydrochar from iron-rich hyperaccumulators. In this study, iron-rich biomass was obtained by irrigating Phytolacca acinosa Roxb. using iron salt. Magnetic nano-Fe₃O₄ hydrochar was prepared from iron-rich Phytolacca acinosa Roxb. via hydrothermal carbonization to remove Cd. The characterization results showed that the synthesized magnetic nanoparticles had an average size of 2.62 ± 0.56 nm and N elements were doped into magnetic nano-Fe₃O₄ hydrochar with abundant oxygenic groups. Cd adsorption on magnetic nano-Fe₃O₄ hydrochar was better fitted using the Langmuir isotherm and the pseudo-second-order kinetic model. The maximum adsorption capacity was 246.6 mg g^-1 of Cd. The research confirmed that Cd adsorption was controlled by multiple mechanisms from the jar test, transmission electron microscopy mapping, scanning electron microscopy-energy dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. CdCO₃ crystals can be formed after adsorption, indicating that surface precipitation played an important role in Cd adsorption. The abundance of O atoms and the doping of N atoms on the hydrochar surface were conducive to Cd adsorption, indicating that the mechanisms were related to surface complexation and electrostatic attraction. In addition, the significant decrease in Na⁺ content after Cd adsorption illustrated that ion exchange had a non-negligible effect on Cd adsorption. This study not only provides a strategy for preparing magnetic nano-Fe₃O₄ hydrochar derived from iron-rich plants but also verifies multiple Cd adsorption mechanisms using magnetic nano-Fe₃O₄ hydrochar.

Investigating the cadmium adsorption capacities of crop straw biochars produced using various feedstocks and pyrolysis temperatures

Cadmium pollution in the environment is ubiquitous and can be a serious health issue. Crop straw-based biochar is a promising adsorbent, yet few studies have systematically examined the effects of both feedstock and pyrolysis temperature on biochar efficacy for cadmium (Cd) sorption. Sorption-desorption experiments were conducted to explore the mechanisms of Cd sorption for biochars derived from wheat straw (WSB), rape straw (RASB), soybean straw (SSB), and peanut straw (PSB) feedstocks, which were produced by pyrolysis at 450 °C and 650 °C. For biochars pyrolyzed at 450 °C, the sorption capacities varied as PSB>SSB>RASB≈WSB, while the order changed as RASB≈WSB>PSB>SSB for 650 °C biochars. With the increase in pyrolysis temperature, for wheat straw biochar and rape straw biochars, Cd sorption capacities increased by 72% and 63%, while there were 61% and 63% decreases for peanut straw biochar and soybean straw biochar, respectively. Compared to the non-legume straw biochars (WSB and RASB), legume straw biochars (SSB and PSB) have higher sorption capacities for Cd. Peanut straw biochar (PSB) produced at 450 °C was found to be the most promising adsorbent for cadmium. Examination of the sorbed biochars using a range of analytical techniques indicated that 450 °C PSB immobilized cadmium by precipitation with non-electrostatic adsorption. The precipitation of Cd on 450 °C PSB was mainly induced by cation exchange between Cd with mineral cations, which caused Cd complexation with carboxyl functional groups.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Single and Competitive Adsorption Behaviors of Cu2+, Pb2+ and Zn2+ on the Biochar and Magnetic Biochar of Pomelo Peel in Aqueous Solution

As an environment-friendly material, biochar has been used to remove heavy metals from wastewater, and the development of cost-effective biochar has been an emerging trend. However, limited studies consider the competitive adsorption of co-existing metals and the separation efficiency of absorbent and solution after adsorption. In this study, pomelo peel was used to prepare biochar (BC) and magnetic biochar (MBC) at different temperatures. Then, the physicochemical properties of the biochars were characterized and the adsorption characteristics of Cu2+, Pb2+, and Zn2+ on the biochars in single, binary, and ternary metal systems were investigated. The results showed that both pyrolysis temperature and magnetization could affect the adsorption capacity of biochar. The adsorption kinetic and thermodynamic processes could be well described by the pseudo-second-order kinetic model and Langmuir model. The adsorption isotherm types of Pb2+ and Zn2+ changed in the binary metal condition. The competitive adsorption order of three heavy metal ions in ternary metal adsorption was Pb2+ > Cu2+ > Zn2+. The MBC of 500 °C showed a good adsorption capacity to Pb2+ in the co-existing environment, and the maximum adsorption capacity was 48.74 mmol g−1. This study also provided technical support for the utilization of pomelo peel and the engineering application of biochar.

Adsorption characteristics and mechanisms of Pb2+ and Cd2+ by a new agricultural waste-Caragana korshinskii biomass derived biochar

In order to explore the comprehensive utilisation and recycling technology of Caragana korshinskii resources, a new agricultural biomass waste, 15 kinds of Caragana korshinskii biochar (CB) were prepared by controlling the pyrolysis temperature and time at the anaerobic environment. Moreover, we pay more attention to deriving the adsorption mechanisms and exploring the difference in adsorption characteristics of Pb²⁺ and Cd²⁺. The optimal preparation conditions and the batch adsorption experiments were evaluated, and the adsorption characteristics and mechanisms were discussed using 8 theoretical adsorption models and multiple characterisation methods. The results showed that the CB prepared at 650 °C for 3 h presented the best performance. The Langmuir and Freundlich models can well simulate the isotherm adsorption process of CB for Pb²⁺ and Cd²⁺, respectively. The adsorption kinetics of CB for Pb²⁺ and Cd²⁺ were best fitted by the pseudo-second-order model. The adsorption equilibrium for Pb²⁺ and Cd²⁺ was reached within 3 h, and their maximum adsorption capacity reached 220.94 mg g^-1 and 42.43 mg g^-1, respectively. In addition, the best addition amount was 3 g L^-1 and 2.2 g L^-1 for Pb²⁺ and Cd²⁺, respectively. The optimum pH range was 3-6 for Pb²⁺ and 6-7.5 for Cd²⁺. The adsorption mechanisms of CB for Pb²⁺ and Cd²⁺ were physicochemical composite adsorption processes, mainly including physical sorption on surface sites, intraparticle diffusion, electrostatic adsorption, ion/ligand exchange, cationic-π interactions, surface complexation and precipitation. Furthermore, the ash of CB also presented a positive effect on the adsorption of Pb²⁺. Compared with other cellulose- and lignin-based biomass materials, CB showed low cost and efficient performance without complicated modification conditions. Therefore, this study demonstrates that CB is a promising raw material in water pollution control to immobilise heavy metals.

Preparation of biochar by mango peel and its adsorption characteristics of Cd(ii) in solution

Biochars were prepared by pyrolyzing mango peel waste at 300, 400, 500, 600 and 700 °C. Various characterizations were carried out to explore the effect of pyrolysis temperature on the biochars. The data indicated that the physical and chemical properties of biochar such as pH, element ratio, specific surface area and functional groups changed with the increase of pyrolysis temperature. The yield and contents of hydrogen, nitrogen and oxygen decreased, while contents of the ash and carbon, pH and specific surface area of the biochars increased. In addition, the molar ratios of H/C, O/C and (O + N)/C decreased. In this study, batch adsorption experiments for Cd(ii) adsorption were performed with initial Cd(ii) concentrations of 10-300 mg L-1, contact times of 0-2880 min, various pH (2-8) and biochar dose (1-20 g L-1). Langmuir isotherm and pseudo-second-order kinetics models were better fits than other models, suggesting the dominant adsorption of mango peel biochars is via monolayer adsorption. Biochar derived at 500 °C was found to have the highest adsorption capacity of 13.28 mg g-1 among all biochars and the adsorption efficiency was still 67.7% of the initial adsorption capacity after desorption for 4 times. Based on adsorption kinetics and isotherm analysis in combination with EDS, FTIR and XRD analysis, it was concluded that cation exchange, complexation with surface functional groups and precipitation with minerals were the dominant mechanisms responsible for Cd adsorption by mango peel biochar. The study suggested that mango peel can be recycled to biochars and can be used as a low-cost adsorbent for Cd(ii) removal from wastewater.

Effect of lychee biochar on the remediation of heavy metal-contaminated soil using sunflower: A field experiment

Heavy metal contamination of soils is a serious issue with various consequences in Hunan Province. Here, we aimed to determine the effect and action mechanisms of lychee biochar on the remediation of Pb, Cd, As, and Zn from soil using sunflower (Helianthus annuus). Different amounts of lychee biochar (2.5, 5, and 10%) were added to heavy metal-contaminated soil in the Shuikoushan mining area, Hunan Province. The effects of biochar on the biomass of sunflower plants, and the accumulation and distribution of Pb, Cd, As, and Zn in sunflower plants, and changes in Pb, Cd, As, and Zn concentrations in the rhizosphere soil were studied. The application of biochar stimulated the growth of the sunflower plants, with the maximum biomass recorded in the 5% biochar treatment; however, above this level, biochar inhibited plant growth. Pb, Cd, As, and Zn in sunflower plants were redistributed with biochar addition. The concentration of Pb, Cd, As, and Zn in the leaves and receptacles of sunflower plants increased with biochar application, but their concentration in the roots, stems, and seeds significantly decreased compared with the control. The total amount of accumulated Pb, Cd, and As in sunflower plants increased by 22.9-58.9%, 15.8-42.3%, and 67.9-110%, respectively, compared with that in the control. In the biochar treatments, the total amount of accumulated Zn in sunflowers decreased by 13.8-37.2%, compared with that in the control. The accumulated Pb, Cd, and As in sunflower plants have an antagonistic effect on Zn required by sunflowers. The sunflower plants significantly reduced the concentration of Pb, Cd, As, and Zn in contaminated soil (P < 0.05), which decreased by 12.4, 11.0, 4.35, and 8.17%, respectively, compared with that before planting sunflower. The addition of biochar in heavy metal-contaminated soil significantly enhanced the heavy metal-remediation effect of sunflower. Compared with the control (0% biochar), 10% biochar application decreased the Pb, Cd, As, and Zn concentrations in the rhizosphere of sunflower plants, by 40.6, 31.6, 35.4, and 30.8%, respectively. In conclusion, lychee biochar enhanced the remediation of heavy metals in contaminated soil.

The Eco-Friendly Biochar and Valuable Bio-Oil from Caragana korshinskii: Pyrolysis Preparation, Characterization, and Adsorption Applications

Carbonization of biomass can prepare carbon materials with excellent properties. In order to explore the comprehensive utilization and recycling of Caragana korshinskii biomass, 15 kinds of Caragana korshinskii biochar (CB) were prepared by controlling the oxygen-limited pyrolysis process. Moreover, we pay attention to the dynamic changes of microstructure of CB and the by-products. The physicochemical properties of CB were characterized by Scanning Electron Microscope (SEM), BET-specific surface area (BET-SSA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), and Gas chromatography-mass spectrometry (GC-MS). The optimal preparation technology was evaluated by batch adsorption application experiment of NO3-, and the pyrolysis mechanism was explored. The results showed that the pyrolysis temperature is the most important factor in the properties of CB. With the increase of temperature, the content of C, pH, mesoporous structure, BET-SSA of CB increased, the cation exchange capacity (CEC) decreased and then increased, but the yield and the content of O and N decreased. The CEC, pH, and BET-SSA of CB under each pyrolysis process were 16.64-81.4 cmol·kg-1, 6.65-8.99, and 13.52-133.49 m2·g-1, respectively. CB contains abundant functional groups and mesoporous structure. As the pyrolysis temperature and time increases, the bond valence structure of C 1s, Ca 2p, and O 1s is more stable, and the phase structure of CaCO3 is more obvious, where the aromaticity increases, and the polarity decreases. The CB prepared at 650 °C for 3 h presented the best adsorption performance, and the maximum theoretical adsorption capacity for NO3- reached 120.65 mg·g-1. The Langmuir model and pseudo-second-order model can well describe the isothermal and kinetics adsorption process of NO3-, respectively. Compared with other cellulose and lignin-based biomass materials, CB showed efficient adsorption performance of NO3- without complicated modification condition. The by-products contain bio-soil and tail gas, which are potential source of liquid fuel and chemical raw materials. Especially, the bio-oil of CB contains α-d-glucopyranose, which can be used in medical tests and medicines.

Synergetic effect of magnesium citrate and temperature on the product characteristics of waste lotus seedpod pyrolysis

To understand the synergetic effect of magnesium citrate (MC) and temperature on biomass pyrolysis, co-pyrolysis of lotus seedpod (LS) and MC was carried out in a fixed bed reactor. With the addition of MC, CO2 become the dominate composition in gas (55.83-90.75 vol%). And with temperature increasing, the main components in bio-oil converted from carboxylic acid to phenols and aromatics. Meanwhile, the mesoporous carbon was formed, with the BET specific surface area up to 514.66 m2/g, and pore diameter mainly focused at 3-8 nm. For the catalytic effect, the secondary cracking of pyrolytic volatiles (acetic acid and anhydrosugar) was inhibited, therefore the gas releasing was inhibited below 550 °C. However, at higher temperature, MgO catalysts favored the reduction of acids and deoxygenation via ketonization and aldol condensation reactions. The formed MgO as a template and the catalysis of MgO during co-pyrolysis contributed to the mesoporous structure of solid char.

Preparation of High-Performance CdS@C Catalyst Using Cd-Enriched Biochar Recycled From Plating Wastewater

Biochar is widely used for the adsorptive removal of Cd from water and soil, but the Cd-enriched biochar produced carries a risk of secondary pollution. In this work, biochar derived from rice straw was used to adsorb Cd from plating wastewater. The Cd-enriched biochar showed a saturated adsorption capacity of about 63.5 mg/g and could be recycled and used in a mesoporous carbon-supported CdS (CdS@C) photocatalyst after pyrolysis carbonization and a hydrothermal reaction. The results demonstrated that the as-prepared CdS@C photocatalyst contained mixed cubic and hexagonal CdS phases, with a considerably lower band gap (2.1 eV) than pure CdS (2.6 eV). CdS@C exhibited an enhanced photocatalytic performance for the degradation of organic dyes under visible light irradiation compared with pure CdS due to its excellent light-harvesting capacity and efficient electron-hole separation. Moreover, the continuous formation of active species (h⁺, •OH, and O₂•⁻) was responsible for the photodegradation of organic dyes using CdS@C. This work provides new insights for the safe disposal of Cd-enriched wastewater and for improving the economic viability of Cd-contaminated resources by recovering a value-added photocatalyst.

Simulated photocatalytic aging of biochar in soil ecosystem: Insight into organic carbon release, surface physicochemical properties and cadmium sorption

Photochemical/photocatalytic reaction, one of the aging pathway of biochar in soil, not only changed the physicochemical properties of biochar, but also affected the migration and transformation of pollutants. Wheat straw biochar was photocatalytic aged in a Fenton-like system using organic acid as buffer solution under light sources, the organic carbon release and surface chemical changes of biochar were investigated to illustrate the adsorption behaviors. With Fe(III) or α-Fe₂O₃ added, the total organic carbon (TOC) of aged biochar solution was influenced more by buffer system than light sources, with the highest of 420.59 mg L^-1 in citric acid system. The production of the hydroxyl radical (OH·) at citric/Fe(III) system was higher than the oxalic/Fe(III) system under the Hg lamp and showed an increasing trend with time. With light exposure, the porous structure of the biochar altered and surface area increased from 7.613 to 29.74 m² g^-1. Meanwhile, the adsorption of cadmium ion by biochar aged in citric/Fe(III) system also showed an increased adsorption capacity with a maximum of 73.54 mg g^-1. So, a well understanding of biochar physicochemical properties changes under natural ecosystem was undoubtedly useful for scientific assessment the long-term feasibility of biochar as soil remediation.

Effects of magnesium ferrite biochar on the cadmium passivation in acidic soil and bioavailability for packoi (Brassica chinensis L.)

Biochar (BC) and magnesium ferrite (MF) have been used in effective adsorption of cadmium (Cd) in aqueous environment, whereas little is known about the effect of their composite on Cd adsorption and Cd-contaminated soil remediation. In this study, biochar (BC), magnesium ferrite (MF) and biochar assembled with magnesium ferrite (MB) were prepared for Cd adsorption and then applied in soils (1-2% w/w) to investigate their effects on Cd passivation by performing leaching experiments and early stage seeding growth test for packoi (Brassica chinensis L.). Compared with the BC and MF, the MB showed greater adsorption property for Cd at aqueous solution (31.3 mg/g) and amended soils (1.85 mg/g at 2% applied rate) based on the isotherms studies. Besides, the MB performed the better passivation ability in reduction of the bioavailable Cd and seeding growth experiment. Solid state analysis of the materials before and after leaching indicated that the passivation mechanism may be dominated by ion exchange and surface complexation. Principal component analysis revealed that the soil pH and adsorption capacity had the strong correlation with the contents of bioavailable-Cd and seedling growth. These results indicated that MB could be used as an efficient amendment in Cd contaminated soil for reducing bioavailable Cd concentrations and improving plant growth.

Cupriavidus sp. strain Cd02-mediated pH increase favoring bioprecipitation of Cd2+ in medium and reduction of cadmium bioavailability in paddy soil

This study investigated the effects of Cupriavidus sp. strain Cd02-mediated increase on biosorption and bioprecipitation of Cd²⁺ during the 144-h cultivation time as well as evaluated effectivenesses of changing soil pH and bioavailability of cadmium after bioaugmentation of strain Cd02 into Cd-contaminated paddy soil for 15 days. Results showed that strain Cd02-induced pH increase of the culture medium (from 7.40 to 8.68) facilitated biosorption of Cd²⁺ on Cd02 cell surface (4.82 mg/mg) and extracellular bioprecipitation in form of cadmium carbonate (3.07 mg/mg). Also, the pH values of Cd-contaminated paddy soil increased by 1.41 units after strain Cd02 was applied for 15 days, which thereby promoted the decrease of exchangeable fraction of Cd²⁺ by 6.5% in the tested paddy soil. Meanwhile, strain Cd02 could prosperously live in paddy soils after bioaugmentation. These results suggest that strain Cd02 may be applicable for bioremediation of the heavy metal-contaminated soils by bioaugmentation.

Adsorption characteristics of Pb(II) using biochar derived from spent mushroom substrate

As a multifunctional material, biochar is considered a potential adsorbent for removing heavy metals from wastewater. Most biochars with high adsorption capacities have been modified, but this modification is uneconomical, and modifying biochar may cause secondary pollution. Thus, it is necessary to develop an efficient biochar without modification. In this study, spent P. ostreatus substrate and spent shiitake substrate were used as the raw materials to prepare biochar. Then, the physicochemical properties of the biochars and their removal efficiencies for Pb(II) were investigated. The results showed that the physicochemical properties (e.g., large BET surface area, small pore structure and abundant functional groups) contributed to the large adsorption capacity for Pb(II); the maximum adsorption capacities were 326 mg g-1 (spent P. ostreatus substrate-derived biochar) and 398 mg g-1 (spent shiitake substrate-derived biochar), which are 1.6-10 times larger than those of other modified biochars. The Pb(II) adsorption data could be well described by the pseudo-second-order kinetic model and the Langmuir model. This study provides a new method to comprehensively utilize spent mushroom substrates for the sustainable development of the edible mushroom industry.

Facilitated transport of cadmium by biochar-Fe3O4 nanocomposites in water-saturated natural soils

Herein we explored the co-transport behaviors of cadmium (Cd²⁺) with biochar-Fe₃O₄ nanocomposites (BFNCs) (and biochar-alone for comparison) in water-saturated natural soil (paddy soil and red soil) packed columns. The BFNCs promoted the transport of Cd²⁺ (Cd²⁺ mass recovery = 2.71-10.5%) by 2.5-times in soils, compared to the biochar-alone (Cd²⁺ mass recovery = 1.28-4.07%). Greater interplays via electrostatic attraction, complexation with hydroxyls, and π-π interaction with the aromatic complexes altogether contributed to the higher adsorption capacity and transport potential towards Cd²⁺ by the BFNCs (vs. biochar-alone). The BFNCs greatly increased (27.1-95.5 times) Cd²⁺ transport in soils mainly through BFNC-Cd²⁺ complexes, compared to the negligible transport of Cd²⁺ in soils without presence of BFNCs. Higher mobility of BFNCs and BFNC-Cd²⁺ complex occurred in the red soil than in the paddy soil due to the lower contents of Fe/Al oxides in the red soil. Greater enhancement effect (~2.5 times) on Cd²⁺ was observed by BFNCs derived from wheat straw than wood chip, due to the stronger sorption ability of wheat straw biochar towards Cd²⁺, likely stemming from more mineral composition such as CaCO₃. Our findings suggest that the potential co-transport risks should not be simply ignored particularly when the next-generation of multifunctional biochar‑iron oxide nanocomposites are employed for in-situ remediation of soils contaminated with organic/inorganic contaminants like Cd²⁺.

Adsorption of different forms of phosphorus on modified corn bracts

Excessive phosphorus discharged into the environment could result in the eutrophication, leading to water pollution. Hence, the efficient method for phosphorus removal is urgently in need. In this paper, an agricultural by-product, corn bract, modified by Zr was proposed to remove different forms of phosphorus. A comparison study about the adsorption performance of organic phosphorus (OP) and inorganic phosphorus (IP) was investigated. The results indicated that both the OP and IP reached the maximum adsorption amounts when the initial pH was 2. Compared with IP adsorption, the adsorbent showed higher adsorption rate but lower adsorption capacity for OP. The complexation and the electrostatic attraction were possibly the main adsorption mechanisms. PRACTITIONER POINTS: The agricultural waste, corn bract, was proposed to remove phosphorus. The adsorption performances of OP and IP were compared. The adsorbent showed higher adsorption rate but lower adsorption capacity for OP.

Adsorption and sequestration of cadmium ions by polyptychial mesoporous biochar derived from Bacillus sp. biomass

Bacteria-derived biochars from Bucillus sp. biomass under different pyrolysis temperature (250 °C, 350 °C, 450 °C, and 550 °C, respectively) were prepared, forming polyptychial, mesoporous graphite-like structure. The adsorption and sequestration efficiencies of Cd²⁺ by these biochars were evaluated, and the underlying mechanisms were then discussed. Cd²⁺ sorption data could be well described by Langmuir mode while the pseudo-second-order kinetic model and Elovich model best fitted the kinetic data. The functional groups complexation, cation-π interactions, and interaction with minerals (including surface precipitation with phosphorus and ion exchange) jointly contributed to Cd²⁺ sorption and sequestration on biochar, but the interaction with minerals played a dominant role by forming insoluble cadmium salt composed by polycrystalline and/or amorphous phosphate-bridged ternary complex. The maximum sorption capacity of BBC350 in simulated water phase of soil for Cd²⁺ was 34.6 mg/g. Furthermore, the addition of bacteria-derived biochars (1%, w/w) decreased the fractions easily absorbed by plants for Cd in the test paddy soils by 1.9-26% in a 10-day time. Results of this study suggest that bacteria-derived biochar would be a promising functional material in environmental and agricultural application.

Batch and Column Scale Removal of Cadmium from Water Using Raw and Acid Activated Wheat Straw Biochar

The present study examined novel wheat straw biochar (WSB) and acid treated wheat straw biochar (AWSB) for cadmium removal from contaminated water. A series of batch and column scale experiments was conducted to evaluate the potential of WSB and AWSB for cadmium removal at different biochar dosage (0.5–8 g/L), initial cadmium concentration (5–100 mg/L), solution pH (2–8) and contact time (5–180 min). Results revealed that cadmium adsorption decreased by increasing biochar dosage from 0.5 to 8 g/L; however, optimum dosage for maximum (99%) removal of cadmium was 2 g/L by WSB and 1 g/L by AWSB. Enhanced cadmium removal potential by AWSB is attributed to increased surface area, microporosity and variation in functional groups. Equilibrium experimental data was well described by Freundlich adsorption isotherm whereas kinetic data were better explained with pseudo-second order model. Both WSB and AWSB have shown good adsorption capacity of 31.65 mg/g and 74.63 mg/g, respectively, that is comparable with other costly adsorbents. Columns packed with WSB and AWSB at laboratory scale have also shown good retention of cadmium with excellent reusability. These findings indicate that WSB especially AWSB could be a promising, cost-effective and environmental friendly strategy for the removal of metals from contaminated water.

Synthesis and characterization of exfoliated biochar from four agricultural feedstock

Highly porous biochar (BC) structures have been prepared from inexpensive biomasses like rice straw, bamboo, sugarcane waste, and corn cob via a slow pyrolysis technique in nitrogenous atmosphere. A surface engineering technique has been applied to enhance the surface-to-volume ratio of each biochar sample and finally compared its characteristics through standard surface and elemental characterization techniques, viz. CHN (carbon, hydrogen, and nitrogen), FTIR (Fourier transform infrared spectroscopy), BET (Brunauer-Emmett-Teller), and SEM (scanning electron microscopy). All the biochar samples were observed to be highly carbonized and aromatized. Exfoliated structures were found to contain more elemental carbon (34.14-77.32%) than its native form (30.92-74.46%). Aromatic hydrocarbon, aromatic C=C, aromatics, aliphatic C-O, aliphatic hydrocarbon, and H-bonded OH groups were found to predominate in the surface of biochar structures independent of their precursor composition and extent of exfoliation. SEM micrographic images clearly ensured about the unoriented sheets like the morphology of different biochar samples. Although no significant structural difference was found to exist depending on their precursor compositions, quantitative enhancement of porosity was found to be observed after exfoliation. Both native (240.65 m²/g) and exfoliated (712.89 m²/g) biochars derived from sugarcane wastes were observed to have a maximum surface area in comparison to the biochars derived from rice straw (native, 22.08 m²/g; exfoliated, 29.92 m²/g), bamboo (native, 42.08 m²/g; exfoliated, 248.38 m²/g), and corn cob (native, 136.62 m²/g; exfoliated, 221.71 m²/g). Exfoliated biochars were found to be consistently more potent in comparison to its native form as per our comparative characterizations performed so far.

Removal of vanadium and palladium ions by adsorption onto magnetic chitosan nanoparticles

Chitosan (CS), synthesized from chitin chemically extracted from shrimp shells, was used for the synthesis of magnetic chitosan nanoparticles (Fe₃O₄-CSN), which makes the adsorbent easier to separate. Fe₃O₄-CSN was used for the removal of toxic metals such as vanadium (V(V)) and palladium (Pd(II)) ions from aqueous solutions. Influencing factors on the adsorption process such as pH, contact time, adsorbent dosage, and agitation speed were investigated. A competitive adsorption of V(V) and Pd(II) ions for the active sites was also studied. The monolayer maximum adsorption capacities (Q_m) of 186.6 and 192.3 mg/g were obtained for V(V) and Pd(II) ions, respectively. The pseudo-second-order equation gave the best fit for the kinetic data, implying that chemisorption was the determining step. Freundlich model yielded a much better fit than the other adsorption models assessed (Langmuir, Temkin and Dubinin-Radushkevich). Thus, the adsorption of V(V) and Pd(II) ions onto Fe₃O₄-CSN is a combination of physical and chemical adsorption, as based on the kinetics and equilibrium study. Generally, physical adsorption is the mechanism that governs the system, while chemical adsorption is the slowest adsorption step that takes place. Thermodynamic studies displayed that the adsorption process was exothermic and spontaneous. Removal efficiencies of 99.9% for V(V) and 92.3% for Pd(II) ions were achieved, implying that Fe₃O₄-CSN adsorbent had an excellent ability for the removal of the metal ions from real industrial wastewaters without remarkable matrix effect. Graphical abstract ᅟ.

Quantitative mechanisms of cadmium adsorption on rice straw- and swine manure-derived biochars

We quantified and investigated mechanisms for Cd²⁺ adsorption on biochars produced from plant residual and animal waste at various temperatures. Ten biochars were produced by pyrolysis of rice straw (RB) and swine manure (SB) at 300-700 °C and characterized. The Cd²⁺ adsorption isotherms, adsorption kinetics, and desorption characteristics were studied via a series of batch experiments, and Cd²⁺-loaded biochars were analyzed by SEM-EDS and XRD. The total Cd²⁺ adsorption capacity (Q_c) increased with pyrolysis temperature for both biochars, however, rice straw-derived biochars had greater Q_c than swine manure-derived biochars; hence, the biochar derived from rice straw at 700 °C (RB700) had the largest Q_c, 64.4 mg g^-1, of all studied biochars. Cadmium adsorption mechanisms in this study involved precipitation with minerals (Q_cp), cation exchange (Q_ci), complexation with surface functional groups (Q_co), and Cd-π interactions (Q_cπ). Both the pyrolysis temperature and feedstock affected the quantitative contributions of the various adsorption mechanisms. The relative percent contributions to Q_c for Cd²⁺ adsorption by RB and SB were 32.9-72.9% and 35.0-72.5% for Q_cp, 21.7-50.9% and 20.4-43.3% for Q_ci, 2.2-14.8% and 1.4-18.8% for Q_co, and 1.4-3.1% and 3.0-5.8% for Q_cπ, respectively. For biochars produced at higher pyrolysis temperatures, the contributions of Q_cp and Q_cπ to adsorption increased, while the contributions of Q_ci and Q_co decreased. Generally, Q_cp dominated Cd²⁺ adsorption by high-temperature biochars (700 °C) (accounting for approximately 73% of Q_c), and Q_ci was the most prominent mechanism for low-temperature biochars (400 °C) (accounting for 43.3-50.9% of Q_c). Results suggested that biochar derived from rice straw is a promising adsorbent for the Cd²⁺ removal from wastewater and that the low-temperature biochars may outperform the high-temperature biochars for Cd²⁺ immobilization in acidic water or soils.

Green solid synthesis of polyaniline-silver oxide nanocomposite for the adsorptive removal of ionic divalent species of Zn/Co and their radioactive isotopes 65Zn/ 60Co

A comparative study between two nanosorbents, nanopolyaniline (NPANI) and nanopolyaniline coated with nanosilver oxide (NPANI-NAg₂O) is explored to dispose the divalent species of Zn/Co from water and radioactive isotopes ⁶⁵Zn/⁶⁰Co from radioactive wastewater using batch and column techniques. NPANI-NAg₂O nanocomposite was synthesized via solid-solid reaction. Characterization was achieved using FT-IR, TGA, XRD, SEM, HR-TEM, and surface area analysis. The images of SEM and HR-TEM confirmed the success of the modification process and the particle size was found in the range 28.78-68.28 nm (NPANI) and 25.74-85.71 nm (NPANI-NAg₂O), respectively. Solution pH, contact time, solid dosage, and ionic concentration of the metals were studied as fundamental factors. The obtained results indicated that the optimum conditions to dispose Zn/Co divalent species using NPANI were pH 7 and 30-33 min, while NPANI-NAg₂O exhibited the optimum conditions at pH 7 and 20-30 min. The maximum removal capacities were 100.1 and 139.75 mg/g for Zn(II) and 57.93 and 112.1 mg/g for Co(II) using NPANI and NPANI-NAg₂O, respectively. Graphical abstract ᅟ.