Enhancement of ciprofloxacin degradation in aqueous system by heterogeneous catalytic ozonation

Predicting ciprofloxacin and levofloxacin decomposition utilizing ozone micro-nano bubbles through the central composite design method

Antibiotics have several negative effects on aquatic ecosystems and are difficult to degrade using traditional water/wastewater treatment methods. As a result, new treatment techniques must be employed to eliminate these contaminants from aquatic environments. Research on the relationship between the decomposing process of antibiotics and different factors by new technologies is scarce. This research focuses on the capability of ozone micro-nano bubbles (OzMNBs) to eliminate the antibiotics ciprofloxacin (CIPR) and levofloxacin (LEVO) in aqueous solutions. We studied the CIPR and LEVO decomposition to different variables through the central composite design method. The main variables included pH, ozonation time, and initial antibiotic concentration. The correlation coefficients of the quadratic model obtained by using the software, Design Expert version 13.0.1. Analysis of variances proved the significance of models and main factors. Verification tests also confirmed that the final optimum conditions of the antibiotics decomposition were: pH 9, ozonation for 40 min and, initial antibiotic concentration of 5 mg/L. In optimum conditions, removal rate of about 97% and 100% was obtained for CIPR and LEVO, respectively. The order of influence of various factors on CIPR and LEVO decomposition were obtained and the interactions between the main factors were also investigated. At the last stage of the research, the efficiency of OzMNBs in the removal of total organic carbon and mineralization of the solutions containing CIPR and LEVO under optimum conditions was examined.

Application of Engineered Nanomaterials as Nanocatalysts in Catalytic Ozonation: A Review

Given the growing scarcity of water and the continuous increase in emerging pollutants detected in water bodies, there is an imperative need to develop new, more effective, and sustainable treatments for wastewater. Advanced oxidation processes (AOPs) are considered a competitive technology for water treatment. Specifically, ozonation has received notable attention as a promising approach for degrading organic pollutants in wastewater. However, different groups of pollutants are hardly degradable via single ozonation. With continuous development, it has been shown that using engineered nanomaterials as nanocatalysts in catalytic ozonation can increase efficiency by turning this process into a low-selective AOP for pollutant degradation. Nanocatalysts promote ozone decomposition and form active free radicals responsible for increasing the degradation and mineralization of pollutants. This work reviews the performances of different nanomaterials as homogeneous and heterogeneous nanocatalysts in catalytic ozonation. This review focuses on applying metal- and carbon-based engineered nanomaterials as nanocatalysts in catalytic ozonation and on identifying the main future directions for using this type of AOP toward wastewater treatment.

Genome sequencing of Porostereum spadiceum to study the degradation of levofloxacin

Despite various plans to rationalize antibiotic use, antibiotic resistance in environmental bacteria is increasing due to the accumulation of antibiotic residues in the environment. This study aimed to test the ability of basidiomycete fungal strains to biotransform the antibiotic levofloxacin, a widely-used third-generation broad-spectrum fluoroquinolone, and to propose enzyme targets potentially involved in this biotransformation. The biotransformation process was performed using fungal strains. Levofloxacin biotransformation reached 100% after 9 days of culture with Porostereum spadiceum BS34. Using genomics and proteomics analyses coupled with activity tests, we showed that P. spadiceum produces several heme-peroxidases together with H2O2-producing enzymes that could be involved in the antibiotic biotransformation process. Using UV and high-resolution mass spectrometry, we were able to detect five levofloxacin degradation products. Their putative identity based on their MS2 fragmentation patterns led to the conclusion that the piperazine moiety was the main target of oxidative modification of levofloxacin by P. spadiceum, leading to a decrease in antibiotic activity.

Efficient Degradation of Ciprofloxacin in Water over Copper-Loaded Biochar Using an Enhanced Non-Radical Pathway

The development of an efficient catalyst with excellent performance using agricultural biomass waste as raw materials is highly desirable for practical water pollution control. Herein, nano-sized, metal-decorated biochar was successfully synthesized with in situ chemical deposition at room temperature. The optimized BC-Cu (1:4) composite exhibited excellent peroxymonosulfate (PMS) activation performance due to the enhanced non-radical pathway. The as-prepared BC-Cu (1:4) composite displays a superior 99.99% removal rate for ciprofloxacin degradation (initial concentration 20 mg·L-1) within 40 min. In addition, BC-Cu (1:4) has superior acid-base adaptability (3.98~11.95) and anti-anion interference ability. The trapping experiments and identification of reactive oxidative radicals confirmed the crucial role of enhanced singlet oxygen for ciprofloxacin degradation via a BC-Cu (1:4)/PMS system. This work provides a new idea for developing highly active, low-cost, non-radical catalysts for efficient antibiotic removal.

Effective adsorptive removal of sulfamethoxazole (SMX) from aqueous solution by ZIF-8 derived adsorbent ZC-0.5

Efficient removal of antibiotics from the aquatic environment is urgently needed due to their obstinate accumulation and non-biodegradability. In this study, a mesoporous carbon material (ZC-0.5) was successfully synthesized for the adsorption of sulfamethoxazole (SMX), one of the major antibiotics for the treatment of human and animal infections. ZIF-8 as the precursor of ZC-0.5, specifically, using cetyl trimethyl ammonium bromide (CTAB) and sodium laurate (SL) as dual templates and carbonizing at 800 ℃. This novel adsorbent exhibited a high proportion of mesopore (75.64%) and a large specific surface area (1459.73 m²·g^-1). The adsorption experiment examined the reusability of ZC-0.5 and that it could retain superior maximum adsorption capacities (167.45 mg∙L^-1) after five cycles of adsorption and desorption. The adsorption process satisfied the pseudo-second-order kinetic (PSO) and mixed first- and second-order kinetic (MOE). It also satisfied the Freundlich and Sips isotherm models. Moreover, thermodynamic calculation indicated the adsorption process was spontaneous, endothermal, and entropy-increasing. Furthermore, plausible adsorption mechanisms were explained through van der Waals force, electrostatic interaction, hydrophobic force, π-π interaction, and hydrogen bond. This work offers a new efficient adsorbent for antibiotic elimination.

Artificial intelligence-aided preparation of perovskite SrFexZr1-xO3-δ catalysts for ozonation degradation of organic pollutant concentrated water after membrane treatment

Membrane technology has been widely used to treat wastewater from a variety of industries, but it also results in a large amount of concentrated wastewater containing organic pollutants after membrane treatment, which is challenging to decompose. Here in this work, a series of perovskite SrFe_xZr_1-xO_3-δ catalysts were prepared via a modified co-precipitation method and evaluated for catalytic ozone oxidative degradation of m-cresol. An artificial neural intelligence networks (ANN) model was employed to train the experimental data to optimize the preparation parameters of catalysts, with SrFe_0.13Zr_0.87O_3-δ being the optimal catalysts. The resultant catalysts before and after reduction were then thoroughly characterized and tested for m-cresol degradation. It was found that the co-doping of Fe and Zr at the B-site and the improvement of oxygen vacancies and oxygen active species by reduction dramatically increased TOC removal rates up to 5 times compared with ozone alone, with the conversion rate of m-cresol reaching 100%. We also proposed a possible mechanism for m-cresol degradation via investigating the intermediates using GC-MS, and confirmed the good versatility of the reduced SrFe_0.13Zr_0.87O_3-δ catalyst to remove other common organic pollutants in concentrated wastewater. This work demonstrates new prospects for the use of perovskite materials in wastewater treatment.

Insight into advanced oxidation processes for the degradation of fluoroquinolone antibiotics: Removal, mechanism, and influencing factors

The enrichment and transport of antibiotics in the environments pose many potential hazards to aquatic animals and humans, which has become one of the public health challenges worldwide. As a widely used class of antibiotics, fluoroquinolones (FQs) generally accumulated in the environments as traditional sewage treatment plants cannot completely remove them. Advanced oxidation processes (AOPs) have been shown to be a promising method for the abatement of antibiotic contamination. In this review, influencing factors and relevant mechanisms of FQs removal by various AOPs were summarized. Compared with other AOPs, photocatalytic ozone may be considered as a cost-effective method for degrading FQs. Finally, the benefits and application restrictions of AOPs were discussed, along with proposed research directions to provide new insights into the control of FQs pollutant via AOPs in practical applications.

Treatment of Phenol-Containing Coal Chemical Biochemical Tailwater by Catalytic Ozonation Using Mn-Ce/γ-Al2O3

In this study, a Mn-Ce/γ-Al2O3 catalyst with multiple active components was prepared through the doping–calcination method for advanced treatment of coal chemical biochemical treatment effluent and characterized by X-ray diffraction, X-ray fluorescence spectroscopy, scanning electron microscopy, and BET analysis. In addition, preparation and catalytic ozonation conditions were optimized, and the mechanism of catalytic ozonation was discussed. The Mn-Ce/γ-Al2O3 catalyst significantly enhanced COD and total phenol removal in reaction with ozone. The characterization results suggested that the pore structure of the optimized Mn-Ce/γ-Al2O3 catalyst was significantly improved. After calcination, the metallic elements Mn and Ce existed in the form of the oxides MnO2 and CeO2. The best operating conditions in the study were as follows: (1) reaction time of 30 min, (2) initial pH of 9, (3) ozone dosage of 3.0 g/h, and (4) catalyst dosage of 30 g/L. The removal efficiency of COD and total phenol from coal chemical biochemical tail water was reduced with the addition of tert-butanol, which proves that hydroxyl radicals (•OH) played a leading role in the Mn-Ce/γ-Al2O3 catalytic ozonation treatment process of biochemical tailwater. Ultraviolet absorption spectroscopy analysis indicated that some conjugated structures and benzene ring structures of organics in coal chemical biochemical tail water were destroyed. This work proposes the utilization of the easily available Mn-Ce/γ-Al2O3 catalyst and exhibits application prospects for the advanced treatment of coal chemical biochemical tailwater.

Application of Attapulgite Clay-Based Fe-Zeolite 5A in UV-Assisted Catalytic Ozonation for the Removal of Ciprofloxacin

For the first time, Fe-zeolite 5A (Fe-Z5A) efficacy in the UV-assisted ozonation process to remove ciprofloxacin (CF) in wastewater is investigated. FTIR, SEM, EDX, BET, and the mass transfer process for point of zero charge are used to characterize the catalyst. Furthermore, the synergic process (UV/O3/Fe-Z5A) is compared with O3, O3/UV, and Fe-Z5A/O3 processes. The influence of catalyst dose, hydroxyl radical scavenger, and off-gas ozone released is discussed. The removal efficiency of CF in wastewater (for the synergic process) is compared with a single ozonation process. The results indicate that the synergic process was more efficient than others, with about 73% CF being removed (in 60 minutes) in the synergic process. The results also show that synergic processes produce less off-gas ozone than other processes, suggesting more ozone consumption in the synergic process, and confirmed by the radical scavenger effect and hydrogen peroxide decomposition studies. The Fe-Z5A was found to operate through a hydroxyl mechanism in which Fe worked as an active site that promotes the formation of hydroxyl radicals. Finally, the synergic process was more efficient than the ozonation process in the wastewater matrix. Hence, Fe-Z5A/O3/UV pathway is highly efficient for the degradation of pharmaceuticals in wastewater.

Refractory organic compounds in coal chemical wastewater treatment by catalytic ozonation using Mn-Cu-Ce/Al2O3

A composite Mn-Cu-Ce tri-metal oxide supported on γ-Al₂O₃ (Mn-Cu-Ce/Al₂O₃) catalyst was prepared by an impregnation-calcination method and investigated in the catalytic ozonation treatment of real coal chemical wastewater (CCW). The catalyst was characterized by XRD, SEM, TEM, XRF, BET, and XPS techniques. The results showed that Mn, Cu, and Ce metal oxides were evenly distributed on the Al₂O₃ surface and the catalyst maintained a large surface area and a high pore volume compared with the pristine Al₂O₃. The synergy between Mn, Cu, and Ce oxides greatly enriched the catalytic active sites and enhanced the ozonation performance. The catalytic ozonation process with Mn-Cu-Ce/Al₂O₃ increased the removal rate of total organic carbon (TOC) by 31.6% compared with ozonation alone. The ketones, aromatic compounds, phenols, and nitrogen-containing heterocyclic compounds in CCW have been effectively degraded and mineralized by Mn-Cu-Ce/Al₂O₃ catalytic ozonation process, and its biodegradability has also been significantly improved. The experimental results of ∙OH scavengers revealed that the mechanism of Mn-Cu-Ce/Al₂O₃ catalytic ozonation was to promote the generation of ∙OH radicals. The catalytic activity of Mn-Cu-Ce/Al₂O₃ was only a slight decrease in six consecutive catalytic ozonation treatments, showing good stability. Therefore, Mn-Cu-Ce/Al₂O₃ can be used as a candidate catalyst for the advanced treatment of refractory organic wastewaters upon catalytic ozonation.

Developments in the intensification of photo-Fenton and ozonation-based processes for the removal of contaminants of emerging concern in Ibero-American countries

Contaminants of emerging concern (CECs), such as pharmaceuticals, personal care products, pesticides, synthetic and natural hormones and industrial chemicals, are frequently released into the environment because of the inability of conventional processes in municipal wastewater treatment plants to remove them. Some examples of alternative options to remove such pollutants are photo-Fenton and ozone-based processes, which are two techniques widely studied in Ibero-American countries. In fact, this region has been responsible for delivering frequently publications and conferences on advanced oxidation processes. This work is a critical review of recent developments in the intensification of the two aforementioned advanced oxidation techniques for CECs elimination in the Ibero-American region. Specifically for the photo-Fenton process (pF), this study analyses strategies such as iron-complexation with artificial substances (e.g., oxalic acid and ethylenediamine-N,N'-disuccinic acid) and natural compounds (such as humic-like substances, orange juice or polyphenols) and hybrid processes with ultrasound. Meanwhile, for ozonation, the enhancement of CECs degradation by adding hydrogen peroxide (i.e., peroxone), ultraviolet or solar light, and combining (i.e., photolytic ozonation) with catalysts (i.e., catalytic ozonation) was reviewed. Special attention was paid to how efficient these techniques are for removing contaminants from water matrices, and any potentialities and weak points of the intensified processes.

Synthesis of an easily recyclable and safe adsorbent from sludge pyrochar for ciprofloxacin adsorption

Utilization of sludge pyrochar (SP) is the terminal step to loop the entire harmless disposal process of sewage sludge with pyrolysis. A new, easily recyclable, and safe adsorbent with well-immobilized heavy metals (HMs) was prepared from SP for ciprofloxacin (CIP) adsorption. The operational conditions for the adsorbent preparation were systematically optimized based on recycling rate and adsorption performance. Additionally, the adsorption conditions, adsorption kinetics, isotherms, and regeneration of adsorbents were further investigated in the present study. The results showed that easily recyclable and safe adsorbents were successfully prepared at 1100 °C under N₂ atmospheric conditions (SPA-N-1100) with a maximum CIP adsorption capacity of 10.42 mg/g. SPA-N-1100 exhibited good CIP adsorption performance at an adsorption temperature of 45 °C and pH between 8.0 and 9.0. The adsorbents were regenerated by thermal desorption at 450 °C with a thorough decomposition of CIP. The adsorption mechanism was mainly dominated by its special porous microspheres-accumulation structure and surface species (e.g., FeP and graphite). Moreover, HMs in the adsorbents were well immobilized in SPA-N-1100 by the generation of new metal mineral phases and encapsulation of melting minerals, which had an ultralow potential for ecological risk during application.

Ozone Quantification by Selected Ion Flow Tube Mass Spectrometry: Influence of Humidity and Manufacturing Gas of Ozone Generator

The quantification of ozone by SIFT-MS was investigated in conditions suitable with an industrial emission context (high ozone demand, dry air/oxygen as the manufacturing gas of the ozone generator, and high humidity levels beyond saturation at room conditions). Ozone reacts with four negative precursor ions available in the SIFT-MS device (NO₂^-, O₂^-, HO^-, and O^-), each precursor ion having its specific domain of linearity. For a high ozone concentration range, only NO₂^- and O₂^- have resulted in a linear behavior (between 1 and 100 ppmv of O₃ for NO₂^-, between 1 and 50 ppmv of O₃ for O₂^-). No water interference was identified during ozone measurements by SIFT-MS using NO₂^- and O₂^- precursor ions, even with extreme humidity levels. The presence of nitrogen oxide contaminants (due to the use of dry air as the manufacturing gas of the ozone generator) affected the ozone quantification by SIFT-MS. It is critical for NO₂^- precursor ions, whose rate constant varied as a function of NO₂ concentrations. With O₂^- precursor ion, ozone was successfully measured in the presence of nitrogen oxides; however, the secondary chemistry must be taken into account.