Adsorption for rhodamine b dye and biological activity of nano-porous chitosan from shrimp shells

Advances in extraction, utilization, and development of chitin/chitosan and its derivatives from shrimp shell waste

Shrimp consumption is in great demand among the seafood used globally. However, this expansion has resulted in the substantial generation and disposal of shrimp shell waste. Through literature search, it has been observed that since 2020, global scholars have shown unprecedented interest in shrimp shell waste and its chitin/chitosan. However, these new insights lack corresponding and comprehensive summarization and analysis. Therefore, this article provides a detailed review of the extraction methods, applications, and the latest research developments on chitin/chitosan from shrimp shells, including micro-nano derivatives, from 2020 to the present. The results indicate that chemical extraction remains the primary technique for the extraction and preparation of chitin/chitosan from shrimp shells. With further refinement and development, adjusting parameters in the chemical extraction process or employing auxiliary techniques such as microwave and radiation enable the customization of target products with different characteristics (e.g., deacetylation degree, molecular weight, and degree of acetylation) according to specific needs. Additionally, in pursuit of environmentally friendly, efficient, and gentle extraction processes, recent research has shifted toward microbial fermentation and green solvent methods for chitin/chitosan extraction. Beyond the traditional antibacterial, film-forming, and encapsulation functionalities, research into the applications of chitosan in biomedical, food processing, new materials, water treatment, and adsorption fields is gradually deepening. Chitin/chitosan derivatives and their modified products have also been a focal point of research in recent years. However, with the rapid expansion, the future development of chitin/chitosan and its derivatives still faces challenges related to the unclear mechanism of action and the complexities associated with industrial scale-up.

Eco-friendly and safe alternatives for the valorization of shrimp farming waste

The seafood industry generates waste, including shells, bones, intestines, and wastewater. The discards are nutrient-rich, containing varying concentrations of carotenoids, proteins, chitin, and other minerals. Thus, it is imperative to subject seafood waste, including shrimp waste (SW), to secondary processing and valorization for demineralization and deproteination to retrieve industrially essential compounds. Although several chemical processes are available for SW processing, most of them are inherently ecotoxic. Bioconversion of SW is cost-effective, ecofriendly, and safe. Microbial fermentation and the action of exogenous enzymes are among the significant SW bioconversion processes that transform seafood waste into valuable products. SW is a potential raw material for agrochemicals, microbial culture media, adsorbents, therapeutics, nutraceuticals, and bio-nanomaterials. This review comprehensively elucidates the valorization approaches of SW, addressing the drawbacks of chemically mediated methods for SW treatments. It is a broad overview of the applications associated with nutrient-rich SW, besides highlighting the role of major shrimp-producing countries in exploring SW to achieve safe, ecofriendly, and efficient bio-products.

Synergic binding of rhodamine-B and heavy metal ions onto polyethyleneimine grafted freeze-dried chitosan/epichlorohydrin composite beads and possible mechanism

This paper reports a synergic binding technique of dye and cadmium/lead ions onto freeze-dried modified chitosan beads (GCCS), in this work modified chitosan beads was applied in binary solution. Chitosan beads (CS) composite was produced and polyethyleneimine was grafted onto the backbone of the developed composite. The beads were analyzed utilizing different analytical techniques such as Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscope (SEM). The model applied in pH equilibrium was found to justify the adsorption of pollutants onto the adsorbent. The model was established from 2 equilibrium calculations, one justifying the acid-base attributes of the modified beads, the other elucidating the adsorption of the adsorbates onto the beads, and a mass balance of the various arrangement of nitrogen in the adsorbent. The excellent fit of the Pseudo-second order and intra-particle diffusion kinetic model shows that chemical binding might be the rate-limiting step. The adsorption isotherms were well represented by the Langmuir and Temkin models at a temperature of 45 °C. The maximum binding capacities (Qmax) from the Langmuir model were observed to be 390, 315 and 278 mg/g for the adsorption of dye, lead and cadmium ions respectively`. However, it was found to be higher in the binary system with the same applicable conditions. The correlation was analyzed utilizing various models and lines of best fit were obtained. Synergic effect was observed from the experimental results acquired from the adsorption of Rhodamine B (RHB) and adsorbates. These findings show the formation of fresh binding sites during simultaneous binding process.

Photocatalytic degradation of Rhodamine B dye by nanostructured powder systems containing nanoencapsulated curcumin or ascorbic acid and ascorbyl palmitate liposomal

Due to inadequate treatment and incorrect management, wastewater with dyes has a great toxic potential as an environmental liability, representing a major concern. In this context, this work aims to investigate the potential application of nanostructured powdery systems (nanocapsules and liposomes) in the photodegradation of Rhodamine B (RhB) dye, under UV and visible irradiation. Curcumin nanocapsules and liposomes containing ascorbic acid and ascorbyl palmitate were prepared, characterized, and dried using the spray drying technique. The drying processes of the nanocapsule and the liposome showed yields of 88% and 62%, respectively, and, after aqueous resuspension of the dry powders, it was possible to recover the nanocapsule size (140 nm) and liposome size (160 nm). The dry powders were characterized by Fourier transform infrared spectroscopy (FTIR), N₂ physisorption at 77 K, X-ray diffraction (XRD), and diffuse reflectance spectroscopy (DRS-UV). Under UV irradiation, 64.8% and 58.48% of RhB were removed with nanocapsules and liposomes, respectively. While under visible radiation, nanocapsules and liposomes were able to degrade 59.54% and 48.79% of RhB, respectively. Under the same conditions, commercial TiO₂ showed degradation of 50.02% (UV) and 42.14% (visible). After 5 cycles of reuse, there was a decrease of about 5% for dry powders under UV irradiation and 7.5% under visible irradiation. Therefore, the nanostructured systems developed have potential application in heterogeneous photocatalysis for the degradation of organic pollutants, such as RhB, as they demonstrated superior photocatalytic performance to commercial catalysts (nanoencapsulated curcumin > ascorbic acid and ascorbyl palmitate liposomal > TiO₂).

Electrochemistry Study of Bio-Based Composite Biopolymer Electrolyte-Starch/Cardol

The environmental problems generated by pollution due to polymers of petrochemical origin have led to the search for eco-friendly alternatives such as the development of biopolymers or bio-based polymers. The aim of this work was to evaluate the electrochemical behavior of a biopolymer composite made from cassava starch and cardol extracted from cashew nut shell liquid. The biopolymers were prepared using the thermochemical method, varying the synthesis pH and the cardol amounts. The biopolymers were synthesized in the form of films and characterized by cyclic voltamperometry and electrochemical impedance spectroscopy. The biopolymers showed a rich electroactivity, with three oxidation-reduction processes evidenced in the voltamperograms. On the other hand, the equivalent circuit corresponding to the impedance behavior of biopolymers integrated the processes of electron transfer resistance, electric double layer, redox reaction process, and resistance of the biopolymeric matrix. The results allowed us to conclude that the cardol content and the synthesis pH were factors that affect the electrochemical behavior of biopolymer composite films. Electrochemical processes in biopolymers were reversible and involved two-electron transfer and were diffusion-controlled processes.

Evaluation of cytotoxicity, reactive oxygen species and nitrous oxide of nanochitosan from shrimp shell

This work aims to synthesize, characterize and evaluate the biological activity of nanochitosan (NQ) prepared from shrimp, showing an innovative character and correlating with sustainable development, in promoting an alternative to the solid waste (shrimp) shell and a biological application of the novel nanomaterial. The NQ synthesis was carried out by the alkaline deacetylation process of chitin obtained of the demineralization, deproteinization and deodorization steps from shrimp shells. NQ was characterized by X-ray Powder Diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), N₂ porosimetry (BET/BJH methods), zeta potential (ZP) and zero charge point (pH_ZCP). To evaluate the safety profile was carried out the cytotoxicity, DCFHA and NO tests in 293T and HaCat cell lines. Regarding the cell viability, NQ did not show toxicity for the tested cell lines. In the evaluation of the ROS production and NO tests, there was no increase in the levels of free radicals and between the negative control, respectively. Therefore, NQ does not present cytotoxicity in the cell lines tested (10, 30, 100 and 300 μg mL^-1), proposing new perspectives on the use of NQ as a potential nanomaterial for biomedical applications.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pHPZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.