Magnetic Biomass Activated Carbon-Based Solid-Phase Extraction Coupled with High Performance Liquid Chromatography for the Determination of Phenylurea Herbicides in Bottled Rose Juice and Water Samples

In situ formation of solidified supramolecular solvent based dispersive liquid-liquid microextraction for the enrichment of phenylurea herbicides in water, fruit juice, and milk

A convenient, efficient, and green dispersive liquid-liquid microextraction based on the in situ formation of solidified supramolecular solvents combined with high performance liquid chromatography was developed for the determination of four phenylurea herbicides in liquid samples, including monuron, monolinuron, isoproturon, and chlortoluron. Herein, a novel supramolecular solvent was prepared by the in situ reaction of [P4448]Br and NH4PF6, which had the advantages of low melting point, high density, and good dispersibility. In addition, the microscopic morphology and physical properties of supramolecular solvent were characterized, and the extraction conditions were optimized. The results showed that the analytes had good linearity (R2 > 0.9998) within the linear range. The limits of detection and quantification for the four phenylurea herbicides were in the range of 0.13-0.19 μg L-1 and 0.45-0.65 μg L-1, respectively. The prepared supramolecular solvent is suitable for the efficient extraction of phenylurea herbicides in water, fruit juice, and milk.

Magnetic Persimmon Leaf Composite: Preparation and Application in Magnetic Solid-Phase Extraction of Pesticides in Water Samples

In recent years, the utilization of biomass materials for the removal and detection of water pollutants has garnered considerable attention. This study introduces, for the first time, the preparation of Fe3O4/persimmon leaf magnetic biomass composites. The magnetic composites were employed in a magnetic solid-phase extraction method, coupled with gas chromatography-electron capture detection (GC-ECD), for the analysis of four pesticides (trifluralin, triadimefon, permethrin, and fenvalerate) in environmental water samples. The innovative magnetic persimmon leaf composites were synthesized by in situ generation of Fe3O4 nanoparticles through coprecipitation and loaded onto persimmon leaves. These composites exhibit superparamagnetism with a saturation magnetization of 12.8 emu g-1, facilitating rapid phase separation using a magnetic field and reducing the extraction time to 10 min. Desorption can be achieved within 30 s by aspirating 20 times, eliminating the need for time-consuming and labor-intensive experimental steps like filtration and centrifugation. The specific surface area of the magnetic composite adsorbent increased from 1.3279 m2 g-1 for the original persimmon leaf to 5.4688 m2 g-1. The abundant hydroxyl and carboxyl groups on the composites provide ample adsorption sites, resulting in adsorption capacities ranging from 55.056 mg g-1 to 73.095 mg g-1 for the studied pesticides. The composites exhibited extraction recoveries ranging from 80% to 90% for the studied pesticides. Compared to certain previously reported MSPE methods, this approach achieves equivalent or higher extraction recoveries in a shorter operation time, demonstrating enhanced efficiency and convenience. Good linearity of the target analytes was obtained within the range of 0.75-1500 μg L-1, with a determination of coefficient (R2) greater than 0.999. These findings contribute to the use of magnetic persimmon leaf biomass materials as effective and environmentally friendly adsorbents for pollutant determination in water samples.

Biomass-derived porous material synthesized by one-step calcination method for the magnetic solid phase extraction of polychlorinated biphenyls in water

Recent findings unfold that biomass materials with the micro/mesoporous structure were often treated as adsorbents for organic substances. In this work, one-step calcination method was adopted in the preparation of magnetic porous green bean biomass material. It has the properties of magnetism and porosity after the addition of Co(NO₃ )₂ and high temperature calcination. A variety of characterizations have been operated, including energy dispersive X-ray detector, vibrating sample magnetometer, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis and so on. It has the specific surface area 168.1611 m² ∙g^-1 and the pore volumes 0.1764 cm³ ∙g^-1 . The material was used in magnetic solid phase extraction of three polychlorinated biphenyls including 2-chlorobiphenyl, 4-chlorobiphenyl and 2,2,5-trichlorobiphenyl. Several factors were investigated, such as material amount, eluents, adsorption time, solution pH, salinity and the reusability. Under optimized conditions, good recoveries (90.24-93.34%) were achieved with the relative standard deviation in a range from 2.30 % to 4.83 %. Three real water samples (tap, river and lake water) were tested to verify the accuracy of the method. This method can be successfully used in the analysis of some polychlorinated biphenyls congeners in water. This article is protected by copyright. All rights reserved.

Designing a moderately hydrophobic sol-gel monolithic Carbowax 20 M sorbent for the capsule phase microextraction of triazine herbicides from water samples prior to HPLC analysis

The determination of triazine herbicides in water samples is of utmost importance, due to their persistence and excessive use. However, since the concentration of triazine pesticides in real samples is low, an extraction/preconcentration step is typically required. Capsule phase microextraction (CPME) is a recently introduced sample preparation technique in which highly efficient sol-gel sorbents are encapsulated in a tubular polymer membrane. This particular design integrates the filtration and stirring mechanism into one extraction device, enabling the application of CPME for in situ sampling. In this study, CPME coupled to high performance liquid chromatography-diode array detection (HPLC-DAD) was employed for the first time for the determination of six triazine herbicides (i.e., simazine, cyanazine, atrazine, prometryn, terbuthylazine and propazine) in water samples. Microextraction capsules containing a moderately hydrophobic sol-gel Carbowax 20 M sorbent provided the highest extraction efficiency towards the examined pesticides. The main parameters affecting the adsorption and desorption steps of the CPME procedure were investigated and optimized. Under the selected conditions, limits of detection (signal/noise = 3.3) were 0.15 ng mL^-1 for the target analytes. Moreover, the relative standard deviation for the within-day and between-days repeatability were less than 7.2% and 9.9%, respectively. The method was successfully applied to the analysis of mineral water, tap water, rainwater and lake water samples. The reported protocol could overcome the need for sample filtration prior to the sample preparation of the water samples, resulting in simplification of the overall sample handling, improved data quality with minimal loss of analytes and reduced sample preparation cost.

In-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid for the simultaneous determination of triazine and phenylurea pesticide in vegetable protein drinks

A novel in-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid (in-syringe TC-LLME-SFIL) combined with high performance liquid chromatography was developed for the simultaneous determination of monuron, chlorotoluron, atrazine, monolinuron, propazine and prometryn in commercial vegetable protein drinks. The samples were deproteinized by trichloroacetic acid and further cleaned up by solid phase extraction column. The ionic liquid tributyldodecylphosphonium tetrafluoroborate ([P_{4 4 4 12}]BF₄) was used as extraction solvent and dispersed into the depurated sample solution to form fine droplets with the assistance of heating and vortex. With the help of an ice bath, the ionic liquid phase solidified and floated on the surface of aqueous phase. After separation from the aqueous phase, the solidified ionic liquids were dissolved with acetonitrile and the resulting solution was analyzed by high performance liquid chromatography. Some extraction parameters, including type and amount of adsorbent, type and amount of ionic liquids, amount of NaCl, melting temperature and time of ionic liquid, vortex time, pH of sample solution, ice bath temperature and time, were investigated and optimized by single-factor experiment, Plackett-Burman design and Box-Behnken design. The results showed that good linearities (r ≥ 0.9994) were obtained in the concentration range of 7.8-1000.0 μg/L. The limits of detection and quantification were in the range of 0.25-2.59 μg/L and 0.82-8.63 μg/L, respectively. The spiked recoveries were 81.26-118.42% with the relative standard deviation (RSD, n = 3) lower than 8.17%. The present method was successfully applied to the simultaneous determination of triazine and phenylurea herbicides in vegetable protein drinks.

[Research progress in the application of magnetic solid phase extraction based on carbon based magnetic materials in food analysis]

Trace toxic substances in food pose a serious threat to human health, and need to be detected and analyzed to ensure food safety. However, there are many kinds of toxic substances in food, with small amounts and complex matrices, making it necessary to select an appropriate sample pretreatment technology for extraction and purification. There are some disadvantages to sample pretreatment methods such as solid phase extraction and liquid-liquid extraction, in terms of poor selectivity, significant influence of matrix interference, large sample requirement, long extraction time, use of a large amount of harmful organic solvents, and cumbersome and time-consuming operation. Magnetic solid phase extraction (MSPE) combines the advantages of magnetic separation and traditional SPE technology, avoids time-consuming column loading, and can extract the target analyte efficiently. Because of its advantages, in that it has simple operation, is time-saving and fast, requires no centrifugal filtration, and is environmentally friendly, it is considered an efficient sample pretreatment technology and applied in food analysis. The adsorption capacity and selectivity of the magnetic adsorbent used in MSPE are the key factors affecting the extraction efficiency and selectivity of MSPE, and play a key role in the accuracy of the established method. Carbon-based magnetic materials are a type of new functional magnetic materials prepared by the co-precipitation of carbon-based materials (carbon nanotubes, graphene, metal-organic framework-derived carbon, or activated carbon) and magnetic materials. In order to endow carbon-based magnetic materials with the advantages of both, carbon materials and magnetic materials, while also reflecting the advantages of high specific surface area, good stability, low cost, environmental friendliness, excellent physical and chemical properties, high porosity, and high adsorption capacity, proper functional modification is needed. Carbon-based magnetic materials modified by functionalization can efficiently enrich organic and inorganic analytes with different properties, and have seen significant progress in environmental analysis, biological detection, pollution control, and other fields. In recent years, MSPE technology based on carbon-based magnetic materials has been gradually applied in food analysis and pretreatment, but its use is still in infancy and holds immense application potential. Reference to more than 50 papers published in SCI and Chinese core journals over the past four years reveals that carbon-based materials include carbon nanotubes modified by functional groups, reagents, or materials; graphene, graphene oxide, and reduced graphene oxide; carbon derived from a gold organic framework; activated carbon biochar; and nanodiamond. The harmful substances in food samples include esters, mycotoxins, polycyclic aromatic hydrocarbons, antibiotics, alkaloids, phenols, vitamins, and antibiotics. Based on the classification of carbon-based materials, this review reveals that carbon-based magnetic materials have good preconcentration ability for harmful substances in food samples. MSPE can be combined with GC-MS, liquid chromatography-high resolution mass spectrometry (LC-HRMS), ultra-fast liquid chromatography-tandem mass spectrometry (UFLC-MS/MS), ultra high performance liquid chromatography-Q-Exactive high resolution mass spectrometry (UHPLC-Q-Exactive HRMS), high performance liquid chromatography-diode array detection (HPLC-DAD), gas chromatography micro-electron capture detection (GC-μECD), high performance liquid chromatography fluorescence with post-column photochemical derivatization (HPLC-PCD-FLD), and HPLC-UV to analyze food samples. These combined technologies have high accuracy and recovery. However, the synthesis methods of carbon-based magnetic materials such as carbon nanotubes and graphene, incur high energy consumption and high cost, and involve complex processes, which limit their application. Therefore, a carbon-based magnetic adsorbent with low cost, high selectivity, and high extraction efficiency was developed by further exploring functional modification with biochar as a carbon base. This is a very promising direction to develop MSPE technology utilizing biochar-based magnetic materials for food sample pretreatment. This review provides a theoretical basis and technical support for the wide application of carbon-based magnetic materials in MSPE technology for food analysis.

One-step fabrication of alkali-acid modified three-dimensional magnetic biochar for the determination of pesticides in pigment-rich vegetables

Magnetic biochar was successfully synthesized via a one-step method through simultaneous activation and magnetization with alkali-acid modified citrus peel as the raw material, which could effectively penetrate interfering substances. The characterization analysis showed that the magnetic biochar exhibited high graphitic degree, higher specific surface area and smaller pore diameter, which resulted in superior adsorption performance. The magnetic biochar was used as an adsorbent for the cleanup and extraction of 22 pesticides (consisting of insecticides, fungicides and herbicides) from vegetables and the quantitative detection was completed by gas chromatography-mass spectrometry (GC-MS). The Plackett-Burman experimental design (PBD), central composite design (CCD) and response surface methodology (RSM) were employed to identify significant factors and optimal experimental conditions. Under optimal conditions, the methodological linearity was in the range of 1-100 μg kg-1 with the coefficients of determination ranging from 0.9969-0.9999, while the limits of detection (LODs) and limits of quantification (LOQs) were 0.31-0.91 μg kg-1 and 1.03-3.05 μg kg-1, respectively. The recoveries of the analytes from spiked samples were in the range of 78.1-112.5%. It was confirmed that the method established by using magnetic graphitic biochar as the adsorbent is an efficient pretreatment procedure and could be successfully applied for analysis of food safety.

Magnetic solid-phase extraction of caffeine from surface water samples with a micro–meso porous activated carbon/Fe3O4 nanocomposite prior to its determination by GC-MS

A novel micro–meso porous activated carbon/Fe₃O₄ (Bm) composite was synthesized from the active charcoal precursor BAX-1500 and used in the magnetic solid-phase extraction (MSPE) of caffeine prior to its determination by gas chromatography-mass spectrometry (GC-MS). The main factors affecting the extraction and desorption steps of the MSPE procedure were investigated and optimized. These factors include extraction time, sorbent mass and salt addition for the adsorption step and type of eluent, desorption time and volume of desorption solution for the desorption step. Under optimum conditions, the absolute extraction recovery was found to be 91.1% and good linearity was observed in the investigated concentration range of 0.6–12.5 ng mL⁻¹ (R² = 0.9997). The limit of detection was 0.18 ng mL⁻¹ and the limit of quantification was 0.60 ng mL⁻¹. The method was successfully applied to the analysis of surface water samples. The proposed MSPE method is simple, rapid, sensitive and environmentally friendly.

A novel magnetic solid phase material based on a micro–meso porous activated carbon/Fe₃O₄ nanocomposite was used to extract caffeine from surface water samples. The method is efficient and rapid, and has minimum solvent consumption.

Green synthesis of o-hydroxyazobenzene porous organic polymer for efficient adsorption of aromatic compounds

This work presents a simple and eco-friendly synthetic approach to fabricate a novel o-hydroxyazobenzene porous organic polymer (HAzo-POP) by diazo-coupling of 2,6-diaminoanthraquinone with m-trihydroxybenzene in aqueous solution. The prepared HAzo-POP possesses good stability and high adsorption capability towards aromatic organic pollutants due to its porous nature, highly conjugated structure and strong hydrogen bonding ability. The HAzo-POP was successfully used for the solid-phase extraction of phenylurea herbicides from six real samples prior to high performance liquid chromatography with ultraviolet detection. The analytical method showed good linearity in the range of 0.5-160.0 ng g^-1 for celery, lettuce and tomato samples, and 0.4-160.0 ng mL^-1 for milk, soybean milk and juice samples, with low limits of detection in the range from 0.05 to 0.30 ng g^-1 (or mL^-1). The HAzo-POP has a promising application potential for the adsorption of more aromatic organic compounds.

Carbon-Based Fe₃O₄ Nanocomposites Derived from Waste Pomelo Peels for Magnetic Solid-Phase Extraction of 11 Triazole Fungicides in Fruit Samples

Carbon-based Fe₃O₄ nanocomposites (C/Fe₃O₄ NCs) were synthesized by a simple one-step hydrothermal method using waste pomelo peels as the carbon precursors. The characterization results showed that they had good structures and physicochemical properties. The prepared C/Fe₃O₄ NCs could be applied as excellent and recyclable adsorbents for magnetic solid phase extraction (MSPE) of 11 triazole fungicides in fruit samples. In the MSPE procedure, several parameters including the amount of adsorbents, extraction time, the type and volume of desorption solvent, and desorption time were optimized in detail. Under the optimized conditions, the good linearity (R² > 0.9916), the limits of detection (LOD), and quantification (LOQ) were obtained in the range of 1–100, 0.12–0.55, and 0.39–1.85 μg/kg for 11 pesticides, respectively. Lastly, the proposed MSPE method was successfully applied to analyze triazole fungicides in real apple, pear, orange, peach, and banana samples with recoveries in the range of 82.1% to 109.9% and relative standard deviations (RSDs) below 8.4%. Therefore, the C/Fe₃O₄ NCs based MSPE method has a great potential for isolating and pre-concentrating trace levels of triazole fungicides in fruits.