Nitrosomonas sp. Based biosensor for ammonium nitrogen measurement in wastewater

Environmental ammonia analysis based on exclusive nitrification by nitrifying biofilm screened from natural bioresource

Biofilm-based biological nitrification is widely used for ammonia removal, while hasn't been explored for ammonia analysis. The stumbling block is the coexist of nitrifying and heterotrophic microbes in real environment resulting in non-specific sensing. Herein, an exclusive ammonia sensing nitrifying biofilm was screened from natural bioresource, and a bioreaction-detection system for the on-line analysis of environmental ammonia based on biological nitrification was reported. The nitrifying microbes were aggregated into a nitrifying biofilm through a result-oriented bioresource enrichment strategy. The predominant nitrifying population and progressive surface reaction in the plug flow bioreactor led to the exclusive and exhaustive ammonia biodegradation for the establishment of a novel analytical method. The on-line ammonia monitoring prototype achieved complete biodegradation for determining ammonium nitrogen within 5 min and showed exceptional reliability in long-term real sample measurements without frequent calibration. This work offers a low-threshold natural screening paradigm for developing sustainable bioresource-based analytical technologies.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

Water quality assessment of East Kolkata Wetland with a special focus on bioremediation by nitrifying bacteria

East Kolkata Wetlands (EKW) is designated as International Ramsar site and are the hotspot for large-scale wastewater aquaculture practices. However, the continued surveillance of physicochemical properties of water and application of an eco-friendly approach are essential to ensure safe aquaculture practices. In the present study, we assessed the seasonal variation in physicochemical parameters of water across EKW and investigated the role of nitrifying bacteria as probiotics. We statistically analyzed various physicochemical properties of water samples from EKW. Results of the statistical analysis indicated a significant variation in all the physicochemical parameters across the selected water bodies of EKW (p < 0.01). We isolated and enumerated Nitrosomonas sp. and Nitrobacter sp. and assessed their ability to degrade trichloroethylene (TCE). The role of Nitrosomonas sp. and Nitrobacter sp. were further investigated and established through a small-scale experiment. Two microbial isolates, NSW3 and NBW2, displayed superior TCE degradation ability at pH 5, and the application of these strains as probiotics were found to improve the quality of water and survival rate of fishes in the treated experimental tanks. Our findings suggest that the application of the above mixed bacterial cultures in aquaculture could be an effective and environment-friendly approach for safe and productive aquaculture operations.

Colorimetric and Electrochemical Dual-Signal Method for Water Toxicity Detection Based on Escherichia coli and p-Benzoquinone

The development of simple and rapid toxicity detection methods has important practical significance. In this work, a dual-signal method with colorimetric and electrochemical properties for water toxicity detection was proposed for the first time based on a rapid color reaction between Escherichia coli (E. coli) and p-benzoquinone (BQ). Here, E. coli was used as a biocatalyst and BQ was used as a mediator. An IC₅₀ value of 0.75 mg L^-1 for Cu²⁺ was obtained using a two-step electrochemical detection method. Strikingly, toxicity could also be estimated visually by the naked eye, and the minimum detection limit was 3.2 mg L^-1 for Cu²⁺. The dual-signal toxicity detection method extends the function of BQ, and the result is more reliable than the traditional single-signal method. This simple and rapid toxicity detection method shows certain application prospects.

Ammonia oxidation and denitrification in a bio-anode single-chambered microbial electrolysis cell

In this study, anodic ammonia oxidation and denitrification were performed in single-chamber bioelectrochemical systems at a wide range of anodic potentials (-400 to +400 mV) versus Ag/AgCl. The low coulombic efficiencies (~30.84%) in reactors were mainly due to electrons being transferred to atmospheric oxygen through the electrode and reversal of the electrode. The removal efficiencies of acetate, ammonia, and total nitrogen were 100%, 100%, and 40.44% at +200 mV and 100%, 100%, and 50.24% at -200 mV, respectively. The nitrogen-removal mechanisms were nitrogen respiration/nitrate reduction at +200 mV and denitrification at -200 mV, and ammonia oxidation occurred by coupling with sulfate-reducing at -300 and -400 mV. Thauera, Comamonas, Alicycliphilus, Nitrosomonas, Desulforhabdus, Dethiosulfatibacter, and Desulfomicrobium were the dominant genera at the anode which participated in the nitrification/denitrification or sulfate-reducing processes. In summary, ammonia oxidation and denitrification could be coupled with carbon-removal or sulfur-reduction using a bio-anode with a suitable anodic potential.

Current status of water environment and their microbial biosensor techniques - Part II: Recent trends in microbial biosensor development

In Part I of the present review series, I presented the current state of the water environment by focusing on Japanese cases and discussed the need to further develop microbial biosensor technologies for the actual water environment. I comprehensively present trends after approximately 2010 in microbial biosensor development for the water environment. In the first section, after briefly summarizing historical studies, recent studies on microbial biosensor principles are introduced. In the second section, recent application studies for the water environment are also introduced. Finally, I conclude the present review series by describing the need to further develop microbial biosensor technologies. Graphical abstract Current water pollution indirectly occurs by anthropogenic eutrophication (Part I). Recent trends in microbial biosensor development for water environment are described in part II of the present review series.

Development of Conductometric Sensor Based on 25,27-Di-(5-thio-octyloxy)calix[4]arene-crown-6 for Determination of Ammonium

The conductometric sensor based on 25,27-di-(5-thio-octyloxy)calix[4]arene-crown-6 was developed for the quantitative analysis of ammonium. The calixarene was immobilized on the surface of the planar interdigitated electrodes by attachment of its dialkyl sulfide groups to the surface of the gold electrodes. The intrinsic ability of the calixarene to capture ammonium was studied in the conductometric measuring mode and by the electrochemical impedance spectroscopy. The developed sensor showed high selectivity to ammonium in the presence of mono-, di-, and trivalent cations. Selective and highly sensitive detection of ammonium resulted from the complexation between the ammonium ions and a crown-ether fragment of the upper rim of the 25,27-di-(5-thio-octyloxy)calix[4]arene-crown-6 macrocycle. The developed sensor had high signal repeatability. Its sensitivity was found to be satisfactory for the forthcoming sensor application in the water-sample analysis; the linear range was 0.01-1.5 mM and limit of detection 10 μM.