An actin point-mutation neighboring the 'hydrophobic plug' causes defects in the maintenance of cell polarity and septum organization in the fission yeast Schizosaccharomyces pombe

Fission yeast Bgs1 glucan synthase participates in the control of growth polarity and membrane traffic

Rod-shaped fission yeast grows through cell wall expansion at poles and septum, synthesized by essential glucan synthases. Bgs1 synthesizes the linear β(1,3)glucan of primary septum at cytokinesis. Linear β(1,3)glucan is also present in the wall poles, suggesting additional Bgs1 roles in growth polarity. Our study reveals an essential collaboration between Bgs1 and Tea1-Tea4, but not other polarity factors, in controlling growth polarity. Simultaneous absence of Bgs1 function and Tea1-Tea4 causes complete loss of growth polarity, spread of other glucan synthases, and spherical cell formation, indicating this defect is specifically due to linear β(1,3)glucan absence. Furthermore, linear β(1,3)glucan absence induces actin patches delocalization and sterols spread, which are ultimately responsible for the growth polarity loss without Tea1-Tea4. This suggests strong similarities in Bgs1 functions controlling actin structures during cytokinesis and polarized growth. Collectively, our findings unveil that cell wall β(1,3)glucan regulates polarized growth, like the equivalent extracellular matrix in neuronal cells.

Serine catabolism produces ROS, sensitizes cells to actin dysfunction, and suppresses cell growth in fission yeast

Serine is an essential component in organisms as a building block of biomolecules, a precursor of metabolites, an allosteric regulator of an enzyme, etc. This amino acid is thought to be a key metabolite in human diseases including cancers and infectious diseases. To understand the consequence of serine catabolism, we screened natural products to identify a fungal metabolite chaetoglobosin D (ChD) as a specific inhibitor of fission yeast cell growth when cultivated with serine as a sole nitrogen source. ChD targets actin, and actin mutant cells showed severe growth defect on serine medium. ROS accumulated in cells when cultivated in serine medium, while actin mutant cells showed increased sensitivity to oxidative stress. ROS production is a new aspect of serine metabolism, which might be involved in disease progression, and actin could be the drug target for curing serine-dependent symptoms.

G65V Substitution in Actin Disturbs Polymerization Leading to Inhibited Cell Elongation in Cotton

The importance of the actin cytoskeleton for proper cell development has been well established in a variety of organisms. Actin protein sequences are highly conserved, and each amino acid residue may be essential for its function. In this study, we report the isolation and characterization of GhLi ₁ from an upland cotton mutant Ligon lintless-1 (Li₁), which harbors the G65V substitution in its encoded actin protein. Li₁ mutants exhibit pleiotropic malformed phenotypes, including dwarf plants, distorted organs, and extremely shortened fibers. Cytological analysis showed that the actin cytoskeleton was disorganized and the abundance of F-actin was decreased in the Li₁ cells. Vesicles were aggregated into patches, and excessive cellulose synthase complexes were inserted into the plasma membrane during the secondary cell wall biosynthesis stage, which dramatically affected the morphology of the Li₁ cells. Molecular model prediction suggested that the G65V substitution may affect the three-bodied G-actin interaction during F-actin assembly. Biochemical assays demonstrated that the recombinant GhLi₁ protein disturbs actin dynamics by inhibiting the nucleation and elongation processes. Therefore, our findings demonstrate that the G65V substitution in actin had dominant-negative effects on cell elongation, by disturbing actin polymerization and actin cytoskeleton-based biological processes such as intracellular transportation.

Fission yeast Scp3 potentially maintains microtubule orientation through bundling

Microtubules play important roles in organelle transport, the maintenance of cell polarity and chromosome segregation and generally form bundles during these processes. The fission yeast gene scp3+ was identified as a multicopy suppressor of the cps3-81 mutant, which is hypersensitive to isopropyl N-3-chlorophenylcarbamate (CIPC), a poison that induces abnormal multipolar spindle formation in higher eukaryotes. In this study, we investigated the function of Scp3 along with the effect of CIPC in the fission yeast Schizosaccharomyces pombe. Microscopic observation revealed that treatment with CIPC, cps3-81 mutation and scp3+ gene deletion disturbed the orientation of microtubules in interphase cells. Overexpression of scp3+ suppressed the abnormal orientation of microtubules by promoting bundling. Functional analysis suggested that Scp3 functions independently from Ase1, a protein largely required for the bundling of the mitotic spindle. A strain lacking the ase1+ gene was more sensitive to CIPC, with the drug affecting the integrity of the mitotic spindle, indicating that CIPC has a mitotic target that has a role redundant with Ase1. These results suggested that multiple systems are independently involved to ensure microtubule orientation by bundling in fission yeast.

Insight into actin organization and function in cytokinesis from analysis of fission yeast mutants

Actin is a key cytoskeletal protein with multiple roles in cellular processes such as polarized growth, cytokinesis, endocytosis, and cell migration. Actin is present in all eukaryotes as highly dynamic filamentous structures, such as linear cables and branched filaments. Detailed investigation of the molecular role of actin in various processes has been hampered due to the multifunctionality of the protein and the lack of alleles defective in specific processes. The actin cytoskeleton of the fission yeast, Schizosaccharomyces pombe, has been extensively characterized and contains structures analogous to those in other cell types. In this study, primarily with the view to uncover actin function in cytokinesis, we generated a large bank of fission yeast actin mutants that affect the organization of distinct actin structures and/or discrete physiological functions of actin. Our screen identified 17 mutants with specific defects in cytokinesis. Some of these cytokinesis mutants helped in dissecting the function of specific actin structures during ring assembly. Further genetic analysis of some of these actin mutants revealed multiple genetic interactions with mutants previously known to affect the actomyosin ring assembly. We also characterize a mutant allele of actin that is suppressed upon overexpression of Cdc8p-tropomyosin, underscoring the utility of this mutant bank. Another 22 mutant alleles, defective in polarized growth and/or other functions of actin obtained from this screen, are also described in this article. This mutant bank should be a valuable resource to study the physiological and biochemical functions of actin.

Visualization of yeast cells by electron microscopy

In the 1970s, hydrocarbon or methanol utilizable yeasts were considered as a material for foods and ethanol production. During the course of studies into the physiology of yeasts, we found that these systems provide a suitable model for the biogenesis and ultrastructure research of microbodies (peroxisomes). Microbodies of hydrocarbon utilizing Candida tropicalis multiply profusely from the preexisting microbody. β oxidation enzymes in the microbody were determined by means of immunoelectron microscopy. We examined the ultrastructure of Candida boidinii microbodies grown on methanol, and found a composite crystalloid of two enzymes, alcohol oxidase and catalase, by analyzing using the optical diffraction and filtering technique and computer simulation. We established methods for preparing the protoplasts of Schizosaccharomyces pombe and conditions for the complete regeneration of the cell wall. The dynamic process of cell wall formation was clarified through our study of the protoplasts, using an improved ultra high resolution (UHR) FESEM S-900 and an S-900LV. It was found that β-1,3-glucan, β-1,6-glucan and α-1,3-glucan, as well as α-galactomannan, are ingredients of the cell wall. The process of septum formation during cell division was examined after cryo-fixation by high pressure freezing (HPF). It was also found that α-1,3- and β-1,3-glucans were located in the invaginating nascent septum, and later, highly branched β-1,6-glucan also appeared on the second septum. The micro-sampling method, using a focused ion beam (FIB), has been applied to our yeast cell wall research. A combination of FIB and scanning transmission electron microscopy is useful in constructing 3D images and analyzing the molecular architecture of cells, as well as for electron tomography of thick sections of biological specimens.

Insertions within the actin core of actin-related protein 3 (Arp3) modulate branching nucleation by Arp2/3 complex

The Arp2/3 (actin-related protein 2/3) complex nucleates branched actin filaments involved in multiple cellular functions, including endocytosis and cellular motility. Two subunits (Arp2 and Arp3) in this seven-subunit assembly are closely related to actin and upon activation of the complex form a "cryptic dimer" that stably mimics an actin dimer to nucleate a new filament. Both Arps contain a shared actin core structure, and each Arp contains multiple insertions of unknown function at conserved positions within the core. Here we characterize three key insertions within the actin core of Arp3 and show that each one plays a distinct role in modulating Arp2/3 function. The β4/β5 insert mediates interactions of Arp2/3 complex with actin filaments and "dampers" the nucleation activity of the complex. The Arp3 hydrophobic plug plays an important role in maintaining the integrity of the complex but is not absolutely required for formation of the daughter filament nucleus. Deletion of the αK/β15 insert did not constitutively activate the complex, as previously hypothesized. Instead, it abolished in vitro nucleation activity and caused defects in endocytic actin patch assembly in fission yeast, indicating a role for the αK/β15 insert in the activated state of the complex. Biochemical characterization of each mutant revealed steps in the nucleation pathway influenced by each Arp3-specific insert to provide new insights into the structural basis of activation of the complex.

Fission yeast Ags1 confers the essential septum strength needed for safe gradual cell abscission

The α(1-3)glucan synthase Ags1 is essential for both secondary septum formation and the primary septum structural strength needed to counter cell turgor pressure during cell separation.

Fungal cytokinesis requires the assembly of a dividing septum wall. In yeast, the septum has to be selectively digested during the critical cell separation process. Fission yeast cell wall α(1-3)glucan is essential, but nothing is known about its localization and function in the cell wall or about cooperation between the α- and β(1-3)glucan synthases Ags1 and Bgs for cell wall and septum assembly. Here, we generate a physiological Ags1-GFP variant and demonstrate a tight colocalization with Bgs1, suggesting a cooperation in the important early steps of septum construction. Moreover, we define the essential functions of α(1-3)glucan in septation and cell separation. We show that α(1-3)glucan is essential for both secondary septum formation and the primary septum structural strength needed to support the physical forces of the cell turgor pressure during cell separation. Consequently, the absence of Ags1 and therefore α(1-3)glucan generates a special and unique side-explosive cell separation due to an instantaneous primary septum tearing caused by the turgor pressure.

Myosin concentration underlies cell size-dependent scalability of actomyosin ring constriction

The rate of actomyosin ring constriction in cells of different sizes correlates with myosin motor concentration in Neurospora crassa cells, leading to increased division rates in larger cells during cytokinesis.

In eukaryotes, cytokinesis is accomplished by an actomyosin-based contractile ring. Although in Caenorhabditis elegans embryos larger cells divide at a faster rate than smaller cells, it remains unknown whether a similar mode of scalability operates in other cells. We investigated cytokinesis in the filamentous fungus Neurospora crassa, which exhibits a wide range of hyphal circumferences. We found that N. crassa cells divide using an actomyosin ring and larger rings constricted faster than smaller rings. However, unlike in C. elegans, the total amount of myosin remained constant throughout constriction, and there was a size-dependent increase in the starting concentration of myosin in the ring. We predict that the increased number of ring-associated myosin motors in larger rings leads to the increased constriction rate. Accordingly, reduction or inhibition of ring-associated myosin slows down the rate of constriction. Because the mechanical characteristics of contractile rings are conserved, we predict that these findings will be relevant to actomyosin ring constriction in other cell types.

Marine antifungal theonellamides target 3beta-hydroxysterol to activate Rho1 signaling

Linking bioactive compounds to their cellular targets is a central challenge in chemical biology. Here we report the mode of action of theonellamides, bicyclic peptides derived from marine sponges. We generated a chemical-genomic profile of theonellamide F using a collection of fission yeast strains in which each open reading frame (ORF) is expressed under the control of an inducible promoter. Clustering analysis of the Gene Ontology (GO) terms associated with the genes that alter drug sensitivity suggested a mechanistic link between theonellamide and 1,3-beta-D-glucan synthesis. Indeed, theonellamide F induced overproduction of 1,3-beta-D-glucan in a Rho1-dependent manner. Subcellular localization and in vitro binding assays using a fluorescent theonellamide derivative revealed that theonellamides specifically bind to 3beta-hydroxysterols, including ergosterol, and cause membrane damage. The biological activity of theonellamides was alleviated in mutants defective in ergosterol biosynthesis. Theonellamides thus represent a new class of sterol-binding molecules that induce membrane damage and activate Rho1-mediated 1,3-beta-D-glucan synthesis.

btn1 affects endocytosis, polarization of sterol-rich membrane domains and polarized growth in Schizosaccharomyces pombe

btn1, the Schizosaccharomyces pombe orthologue of the human Batten disease gene CLN3, exerts multiple cellular effects. As well as a role in vacuole pH homoeostasis, we now show that Btn1p is essential for growth at high temperatures. Its absence results in progressive defects at 37°C that culminate in total depolarized growth and cell lysis. These defects are preceded by a progressive failure to correctly polarize sterol-rich domains after cytokinesis and are accompanied by loss of Myo1p localization. Furthermore, we found that in Sz. pombe, sterol spreading is linked to defective formation/polarization of F-actin patches and disruption of endocytosis and that these processes are aberrant in btn1Δ cells. Consistent with a role for Btn1p in polarized growth, Btn1p has an altered location at 37°C and is retained in actin-dependent endomembrane structures near the cell poles or septum.

Acetylation regulates tropomyosin function in the fission yeast Schizosaccharomyces pombe

Tropomyosin is an evolutionarily conserved alpha-helical coiled-coil protein that promotes and maintains actin filaments. In yeast, Tropomyosin-stabilised filaments are used by molecular motors to transport cargoes or to generate motile forces by altering the dynamics of filament growth and shrinkage. The Schizosaccharomyces pombe tropomyosin Cdc8 localises to the cytokinetic actomyosin ring during mitosis and is absolutely required for its formation and function. We show that Cdc8 associates with actin filaments throughout the cell cycle and is subjected to post-translational modification that does not vary with cell cycle progression. At any given point in the cell cycle 80% of Cdc8 molecules are acetylated, which significantly enhances their affinity for actin. Reconstructions of electron microscopic images of actin-Cdc8 filaments establish that the majority of Cdc8 strands sit in the 'closed' position on actin filaments, suggesting a role in the regulation of myosin binding. We show that Cdc8 regulates the equilibrium binding of myosin to actin without affecting the rate of myosin binding. Unacetylated Cdc8 isoforms bind actin, but have a reduced ability to regulate myosin binding to actin. We conclude that although acetylation of Cdc8 is not essential, it provides a regulatory mechanism for modulating actin filament integrity and myosin function.

The fission yeast spindle orientation checkpoint: a model that generates tension?

In all eukaryotes, the alignment of the mitotic spindle with the axis of cell polarity is essential for accurate chromosome segregation as well as for the establishment of cell fate, and thus morphogenesis, during development. Studies in invertebrates, higher eukaryotes and yeast suggest that astral microtubules interact with the cell cortex to position the spindle. These microtubules are thought to impose pushing or pulling forces on the spindle poles to affect the rotation or movement of the spindle. In the fission yeast model, where cell division is symmetrical, spindle rotation is dependent on the interaction of astral microtubules with the cortical actin cytoskeleton. In these cells, a bub1-dependent mitotic checkpoint, the spindle orientation checkpoint (SOC), is activated when the spindles fail to align with the cell polarity axis. In this paper we review the mechanism that orientates the spindle during mitosis in fission yeast, and discuss the consequences of misorientation on metaphase progression.

Stg1 is a novel SM22/transgelin-like actin-modulating protein in fission yeast

We identified a novel actin-modulating protein Stg 1 in the fission yeast Schizosaccharomyces pombe. Stg 1 is similar to mammalian SM22/transgelin, and biochemical experiments showed that Stg 1 crosslinked F-actin. Microscopic observation suggested that Stg 1 was a component of actin patch. Overexpression of Stg 1 caused a defect in cytokinesis by suppressing the formation of a contractile ring and formation of abnormal aggregates of F-actin in the ends and mid-region of cells. Although distribution of the actin cytoskeleton was not affected by disrupting Stg 1(+), genetic interaction suggested that Stg 1 was likely involved in controlling the organization of the actin cytoskeleton in cell morphogenesis and cytokinesis in fission yeast.

The novel fission yeast (1,3)beta-D-glucan synthase catalytic subunit Bgs4p is essential during both cytokinesis and polarized growth

Schizosaccharomyces pombe contains four putative (1,3)beta-D-glucan synthase (GS) catalytic subunits, Bgs1p-4p. In this work, we cloned bgs4+ and show that Bgs4p is the only subunit found to be a part of the GS enzyme and essential for maintaining cell integrity during cytokinesis and polarized growth. Here we show that bgs4+, cwg1+ (cwg1-1 shows reduced cell-wall beta-glucan and GS catalytic activity) and orb11+ (orb11-59 is defective in cell morphogenesis) are the same gene. bgs4+ is essential for spore germination and bgs4+ shut-off produces cell lysis at growing poles and mainly at the septum prior to cytokinesis, suggesting that Bgs4p is essential for cell wall growth and to compensate for an excess of cell wall degradation during cytokinesis. Shut-off and overexpression analysis suggest that Bgs4p forms part of a GS catalytic multiprotein complex and that Bgs4p-promoted cell-wall beta-glucan alterations induce compensatory mechanisms from other Bgs subunits and (1,3)alpha-D-glucan synthase. Physiological localization studies showed that Bgs4p localizes to the growing ends, the medial ring and septum, and at each stage of wall synthesis or remodeling that occurs during sexual differentiation: mating, zygote and spore formation, and spore germination. Bgs4p timing and requirements for proper positioning during cytokinesis and its localization pattern during spore maturation differ from those of Bgs1p. Bgs4p localizes overlapping the contractile ring once Bgs1p is present and a Calcofluor white-stained septum material is detected, suggesting that Bgs4p is involved in a late process of secondary or general septum synthesis. Unlike Bgs1p, Bgs4p needs the medial ring but not the septation initiation network proteins to localize with the other septation components. Furthermore, Bgs4p localization depends on the polarity establishment proteins. Finally, F-actin is necessary for Bgs4p delocalization from and relocalization to the growing regions, but it is not needed for the stable maintenance of Bgs4p at the growing sites, poles and septum. All these data show for the first time an essential role for a Bgs subunit in the synthesis of a (1,3)beta-D-glucan necessary to preserve cell integrity when cell wall synthesis or repair are needed.

Schizosaccharomyces pombe Pmr1p is essential for cell wall integrity and is required for polarized cell growth and cytokinesis

The cps5-138 fission yeast mutant shows an abnormal lemon-like morphology at 28 degrees C in minimal medium and a lethal thermosensitive phenotype at 37 degrees C. Cell growth is completely inhibited at 28 degrees C in a Ca2+-free medium, in which the wild type is capable of growing normally. Under these conditions, actin patches become randomly distributed throughout the cell, and defects in septum formation and subsequent cytokinesis appear. The mutant cell is hypersensitive to the cell wall-digesting enzymatic complex Novozym234 even under permissive conditions. The gene SPBC31E1.02c, which complements all the mutant phenotypes described above, was cloned and codes for the Ca2+-ATPase homologue Pmr1p. The gene is not essential under optimal growth conditions but is required under conditions of low Ca2+ (<0.1 mM) or high temperature (>35 degrees C). The green fluorescent protein-tagged Cps5 proteins, which are expressed under physiological conditions (an integrated single copy with its own promoter in the cps5Delta strain), display a localization pattern typical of endoplasmic reticulum proteins. Biochemical analyses show that 1,3-beta-D-glucan synthase activity in the mutant is decreased to nearly half that of the wild type and that the mutant cell wall contains no detectable galactomannan when the cells are exposed to a Ca2+-free medium. The mutant acid phosphatase has an increased electrophoretic mobility, suggesting that incomplete protein glycosylation takes place in the mutant cells. These results indicate that S. pombe Pmr1p is essential for the maintenance of cell wall integrity and cytokinesis, possibly by allowing protein glycosylation and the polarized actin distribution to take place normally. Disruption and complementation analyses suggest that Pmr1p shares its function with a vacuolar Ca2+-ATPase homologue, Pmc1p (SPAPB2B4.04c), to prevent lethal activation of calcineurin for cell growth.

Disruption of astral microtubule contact with the cell cortex activates a Bub1, Bub3, and Mad3-dependent checkpoint in fission yeast

In animal and yeast cells, the mitotic spindle is aligned perpendicularly to the axis of cell division. This ensures that sister chromatids are separated to opposite sides of the cytokinetic actomyosin ring. In fission yeast, spindle rotation is dependent upon the interaction of astral microtubules with the cortical actin cytoskeleton. In this article, we show that addition of Latrunculin A, which prevents spindle rotation, delays the separation of sister chromatids and anaphase promoting complex-mediated destruction of spindle-associated Securin and Cyclin B. Moreover, we find that whereas sister kinetochore pairs normally congress to the spindle midzone before anaphase onset, this congression is disrupted when astral microtubule contact with the actin cytoskeleton is disturbed. By analyzing the timing of kinetochore separation, we find that this anaphase delay requires the Bub3, Mad3, and Bub1 but not the Mad1 or Mad2 spindle assembly checkpoint proteins. In agreement with this, we find that Bub1 remains associated with kinetochores when spindles are mispositioned. These data indicate that, in fission yeast, astral microtubule contact with the medial cell cortex is monitored by a subset of spindle assembly checkpoint proteins. We propose that this checkpoint ensures spindles are properly oriented before anaphase takes place.

Mechanism controlling perpendicular alignment of the spindle to the axis of cell division in fission yeast

In animal cells, the mitotic spindle is aligned perpendicular to the axis of cell division. This ensures that sister chromatids are separated to opposite sides of the cytokinetic actomyosin ring (CAR). We show that, in fission yeast, spindle rotation is dependent on the interaction of astral microtubules with the cortical actin cytoskeleton. Interaction initially occurs with a region surrounding the nucleus, which we term the astral microtubule interaction zone (AMIZ). Simultaneous contact of astral microtubules from both poles with the AMIZ directs spindle rotation and this requires both actin and two type V myosins, Myo51 and Myo52. Astral microtubules from one pole only then contact the CAR, which is located at the centre of the AMIZ. We demonstrate that the anillin homologue Mid1, which dictates correct placement of the CAR, is necessary to stabilise the mitotic spindle perpendicular to the axis of cell division. Finally, we show that the position of the mitotic spindle is monitored by a checkpoint that regulates the timing of sister chromatid separation.

Analysis of microtubules and F-actin structures in hyphae and conidia development of the opportunistic human pathogenic black yeast Aureobasidium pullulans

Organization of the cytoskeleton was studied in the ascomycetous black yeast Aureobasidium pullulans, an opportunistic human pathogen, in an effort to present it as a potential target of antifungal therapy. Long cytoplasmic microtubules, extending along the hyphae from the base to the growing apex, were the dominant structures in multinucleate interphase cells. Before mitosis these microtubules disappeared and were replaced by intranuclear spindles. This reorganization of microtubules occurred along the whole length of hypha before synchronous division of the nuclei. Actin cytokinetic rings were rarely seen. Cortical actin in the form of patches accumulated in areas of cell wall growth, i.e. in the hyphal apex and near the occasionally formed septum. Actin cables were not seen. During synchronous conidiogenesis, the cytoplasmic microtubules extended along developing conidia, and actin patches lined their subcortical areas. Actin rings were formed regularly at the base of uninuclear conidia. Microtubule inhibitor methyl benzimidazol-2-ylcarbamate disintegrated the microtubules, and inhibited nuclear division, development of hyphae and conidiogenesis. Actin inhibitor Cytochalasin D induced swelling of hyphal apexes and developing conidia. This inhibitory activity ceased after 5 to 12 h when the occasional septa appeared and conidiogenesis was completed. The lack of unicellular organization in multinucleate hyphae of A. pullulans seems be related to a rarity of F-actin structures: i.e. absence of actin cables, the lack of actin cytokinetic rings in particular, resulting in the uncoupling of the nuclear division from cytokinesis; the association of both processes is, however, retained during conidiogenesis.

Bgs3p, a putative 1,3-beta-glucan synthase subunit, is required for cell wall assembly in Schizosaccharomyces pombe

beta-Glucans are the main components of the fungal cell wall. Fission yeast possesses a family of beta-glucan synthase-related genes. We describe here the cloning and characterization of bgs3(+), a new member of this family. bgs3(+) was cloned as a suppressor of a mutant hypersensitive to Echinocandin and Calcofluor White, drugs that interfere with cell wall biosynthesis. Disruption of the gene is lethal, and a decrease in Bgs3p levels leads to rounded cells with thicker walls, slightly reduces the amount of the beta-glucan, and raises the amount of alpha-glucan polymer. These cells finally died. bgs3(+) is expressed in vegetative cells grown in different conditions and during mating and germination and is not enhanced by stress situations. Consistent with the observed expression pattern, Bgs3-green fluorescence protein (GFP-Bgs3p) was found at the growing tips during interphase and at the septum prior to cytokinesis, always localized to growth areas. We also found GFP-Bgs3p in mating projections, during the early stages of zygote formation, and at the growing pole during ascospore germination. We conclude that Bgs3p localization is restricted to growth areas and that Bgs3p is a glucan synthase homologue required for cell wall biosynthesis and cell elongation in the fission yeast life cycle.

Localization of the (1,3)beta-D-glucan synthase catalytic subunit homologue Bgs1p/Cps1p from fission yeast suggests that it is involved in septation, polarized growth, mating, spore wall formation and spore germination

Schizosaccharomyces pombe Bgs1p/Cps1p has been identified as a putative (1,3)beta-D-glucan synthase (GS) catalytic subunit with a possible function during cytokinesis and polarized growth. To study this possibility, double mutants of cps1-12 and cdc septation mutants were made. The double mutants displayed several hypersensitive phenotypes and altered actin distribution. Epistasis analysis showed mutations prior to septum synthesis were dominant over cps1-12, while cps1-12 was dominant over the end of septation mutant cdc16-116, suggesting Bgs1p is involved in septum cell-wall (1,3)beta-D-glucan synthesis at cytokinesis. We have studied the in vivo physiological localization of Bgs1p in a bgs1delta strain containing a functional GFP-bgs1(+) gene (integrated single copy and expressed under its own promoter). During vegetative growth, Bgs1p always localizes to the growing zones: one or both ends during cell growth and contractile ring and septum during cytokinesis. Bgs1p localization in cdc septation mutants indicates that Bgs1p needs the medial ring and septation initiation network (SIN) proteins to localize properly with the rest of septation components. Bgs1p localization in the actin mutant cps8-188 shows it depends on actin localization. In addition, Bgs1p remains polarized in the mislocalized growing poles and septa of tea1-1 and tea2-1 mutants. During the meiotic process of the life cycle, Bgs1p localizes to the mating projection, to the cell-to-cell contact zone during cell fusion and to the neck area during zygote formation. Also, Bgs1p localization suggests that it collaborates in forespore and spore wall synthesis. During spore germination, Bgs1p localizes first around the spore during isotropic growth, then to the zone of polarized growth and finally, to the medial ring and septum. At the end of spore-cell division, the Bgs1p displacement to the old end occurs only in the new cell. All these data show that Bgs1p is localized to the areas of polarized cell wall growth and so we propose that it might be involved in synthesizing the lineal (1,3)beta-D-glucan of the primary septum, as well as a similar lineal (1,3)beta-D-glucan when other processes of cell wall growth or repair are needed.

Role of the Rab GTP-binding protein Ypt3 in the fission yeast exocytic pathway and its connection to calcineurin function

A genetic screen for mutations synthetically lethal with fission yeast calcineurin deletion led to the identification of Ypt3, a homolog of mammalian Rab11 GTP-binding protein. A mutant with the temperature-sensitive ypt3-i5 allele showed pleiotropic phenotypes such as defects in cytokinesis, cell wall integrity, and vacuole fusion, and these were exacerbated by FK506-treatment, a specific inhibitor of calcineurin. Green fluorescent protein (GFP)-tagged Ypt3 showed cytoplasmic staining that was concentrated at growth sites, and this polarized localization required the actin cytoskeleton. It was also detected as a punctate staining in an actin-independent manner. Electron microscopy revealed that ypt3-i5 mutants accumulated aberrant Golgi-like structures and putative post-Golgi vesicles, which increased remarkably at the restrictive temperature. Consistently, the secretion of GFP fused with the pho1(+) leader peptide (SPL-GFP) was abolished at the restrictive temperature in ypt3-i5 mutants. FK506-treatment accentuated the accumulation of aberrant Golgi-like structures and caused a significant decrease of SPL-GFP secretion at a permissive temperature. These results suggest that Ypt3 is required at multiple steps of the exocytic pathway and its mutation affects diverse cellular processes and that calcineurin is functionally connected to these cellular processes.

F-actin ring formation and the role of F-actin cables in the fission yeastSchizosaccharomyces pombe

Cells of the fission yeast Schizosaccharomyces pombe divide by the contraction of the F-actin ring formed at the medial region of the cell. We investigated the process of F-actin ring formation in detail using optical sectioning and three-dimensional reconstruction fluorescence microscopy. In wild-type cells, formation of an aster-like structure composed of F-actin cables and accumulation of F-actin cables were recognized at the medial cortex of the cell during prophase to metaphase. The formation of the aster-like structure seemed to initiate from branching of the longitudinal F-actin cables at a site near the spindle pole bodies, which had been duplicated but not yet separated. A single cable extended from the aster and encircled the cell at the equator to form a primary F-actin ring during metaphase. During anaphase,the accumulated F-actin cables were linked to the primary F-actin ring, and then all of these structures seemed to be packed to form the F-actin ring. These observations suggest that formation of the aster-like structure and the accumulation of the F-actin cables at the medial region of the cell during metaphase may be required to initiate the F-actin ring formation. In the nda3 mutant, which has a mutation in ß-tubulin and has been thought to be arrested at prophase, an F-actin ring with accumulated F-actin cables similar to that of anaphase wild-type cells was formed at a restrictive temperature. Immediately after shifting to a permissive temperature, this structure changed into a tightly packed ring. This suggests that the F-actin ring formation progresses beyond prophase in the nda3 cells once the cells enter prophase. We further examined F-actin structures in both cdc12 and cdc15 early cytokinesis mutants. As a result,Cdc12 seemed to be required for the primary F-actin ring formation during prophase, whereas Cdc15 may be involved in both packing the F-actin cables to form the F-actin ring and rearrangement of the F-actin after anaphase. In spg1, cdc7 and sid2 septum initiation mutants, the F-actin ring seemed to be formed in order.

Contractile ring formation in Xenopus egg and fission yeast

How actin filaments (F-actin) and myosin II (myosin) assemble to form the contractile ring was investigated with fission yeast and Xenopus egg. In fission yeast cells, an aster-like structure composed of F-actin cables is formed at the medial cortex of the cell during prophase to metaphase, and a single F-actin cable(s) extends from this structure, which seems to be a structural basis of the contractile ring. In early mitosis, myosin localizes as dots in the medial cortex independently of F-actin. Then they fuse with each other and are packed into a thin contractile ring. At the growing ends of the cleavage furrow of Xenopus eggs, F-actin at first assembles to form patches. Next they fuse with each other to form short F-actin bundles. The short bundles then form long bundles. Myosin seems to be transported by the cortical movement to the growing end and assembles there as spots earlier than F-actin. Actin polymerization into the patches is likely to occur after accumulation of myosin. The myosin spots and the F-actin patches are simultaneously reorganized to form the contractile ring bundles. The idea that a Ca signal triggers cleavage furrow formation was tested with Xenopus eggs during the first cleavage. We could not detect any Ca signals such as a Ca wave, Ca puffs or even Ca blips at the growing end of the cleavage furrow. Furthermore, cleavages are not affected by Ca-chelators injected into the eggs at concentrations sufficient to suppress the Ca waves. Thus we conclude that formation of the contractile ring is not induced by a Ca signal at the growing end of the cleavage furrow.

Interactions among a fimbrin, a capping protein, and an actin-depolymerizing factor in organization of the fission yeast actin cytoskeleton

We report studies of the fission yeast fimbrin-like protein Fim1, which contains two EF-hand domains and two actin-binding domains (ABD1 and ABD2). Fim1 is a component of both F-actin patches and the F-actin ring, but not of F-actin cables. Fim1 cross-links F-actin in vitro, but a Fim1 protein lacking either EF-hand domains (Fim1A12) or both the EF-hand domains and ABD1 (Fim1A2) has no actin cross-linking activity. Overexpression of Fim1 induced the formation of F-actin patches throughout the cell cortex, whereas the F-actin patches disappear in cells overexpressing Fim1A12 or Fim1A2. Thus, the actin cross-linking activity of Fim1 is probably important for the formation of F-actin patches. The overexpression of Fim1 also excluded the actin-depolymerizing factor Adf1 from the F-actin patches and inhibited the turnover of actin in these structures. Thus, Fim1 may function in stabilizing the F-actin patches. We also isolated the gene encoding Acp1, a subunit of the heterodimeric F-actin capping protein. fim1 acp1 double null cells showed more severe defects in the organization of the actin cytoskeleton than those seen in each single mutant. Thus, Fim1 and Acp1 may function in a similar manner in the organization of the actin cytoskeleton. Finally, genetic studies suggested that Fim1 may function in cytokinesis in cooperation with Cdc15 (PSTPIP) and Rng2 (IQGAP), respectively.

Identification of two type V myosins in fission yeast, one of which functions in polarized cell growth and moves rapidly in the cell

We characterized the novel Schizosaccharomyces pombe genes myo4(+) and myo5(+), both of which encode myosin-V heavy chains. Disruption of myo4 caused a defect in cell growth and led to an abnormal accumulation of secretory vesicles throughout the cytoplasm. The mutant cells were rounder than normal, although the sites for cell polarization were still established. Elongation of the cell ends and completion of septation required more time than in wild-type cells, indicating that Myo4 functions in polarized growth both at the cell ends and during septation. Consistent with this conclusion, Myo4 was localized around the growing cell ends, the medial F-actin ring, and the septum as a cluster of dot structures. In living cells, the dots of green fluorescent protein-tagged Myo4 moved rapidly around these regions. The localization and movement of Myo4 were dependent on both F-actin cables and its motor activity but seemed to be independent of microtubules. Moreover, the motor activity of Myo4 was essential for its function. These results suggest that Myo4 is involved in polarized cell growth by moving with a secretory vesicle along the F-actin cables around the sites for polarization. In contrast, the phenotype of myo5 null cells was indistinguishable from that of wild-type cells. This and other data suggest that Myo5 has a role distinct from that of Myo4.

Characterization of a fission yeast mutant which displays defects in cell wall integrity and cytokinesis

The fission yeast cps6-153 mutant was originally isolated based on its hypersensitivity to the spindle poison isopropyl N-3-chlorophenyl carbamate (CIPC). The mutant also shows defects in both cell wall integrity and cytokinesis, resulting in the accumulation of unseparated cells with weakened cell walls. The arrested cells display a disoriented alignment of cytoplasmic microtubules. When the mutant cells are cultivated at high temperature (35 degrees C), both cell walls and septa become very thick. Electron microscopy revealed the disorganized structure of the thickened cell walls and septa, in which fibrillar components were not completely masked with an amorphous matrix. rad25+ was cloned from a genomic library by complementation of the mutant phenotypes, suggesting the involvement of Rad25p, one of two 14-3-3 proteins in S. pombe, in the pathway of cell wall integrity and cytokinesis.

A MAP kinase-dependent actin checkpoint ensures proper spindle orientation in fission yeast

The accurate segregation of chromosomes at mitosis depends on a correctly assembled bipolar spindle that exerts balanced forces on each sister chromatid. The integrity of mitotic chromosome segregation is ensured by the spindle assembly checkpoint (SAC) that delays mitosis in response to defective spindle organisation or failure of chromosome attachment. Here we describe a distinct mitotic checkpoint in the fission yeast, Schizosaccharomyces pombe, that monitors the integrity of the actin cytoskeleton and delays sister chromatid separation, spindle elongation and cytokinesis until spindle poles have been properly oriented. This mitotic delay is imposed by a stress-activated mitogen-activated protein (MAP) kinase pathway but is independent of the anaphase-promoting complex (APC).

Fission yeast homologues of the B' subunit of protein phosphatase 2A: multiple roles in mitotic cell division and functional interaction with calcineurin

BACKGROUND

Protein phosphatase 2A (PP2A) is a serine/threonine phosphatase distributed in eukaryotes from yeast to human, and plays pivotal roles in diverse cellular functions such as metabolism, cell cycle progression, gene expression and development. PP2A holoenzyme is a heterodimer of a catalytic subunit C and a regulatory subunit A, or a heterotrimer of C, A and a variable regulatory subunit consisting of three families; B, B', and PR72. Specific functions for each variable subunit are not well understood.

RESULTS

Two fission yeast genes pbp1+ and pbp2+ homologous to the regulatory subunit B' were isolated. Physical in vivo interaction of the gene products with the catalytic subunit was demonstrated. A double disruption haploid mutant (Deltapbp1Deltapbp2) showed growth defect, cell shape and size abnormality, multiseptation and anucleated cell formation due to abnormality in septum positioning. These phenotypes were suppressed by human B' cDNA, indicating the striking conservation of the B' function from yeast to human. Over-expression of fission yeast B' led to growth defects, a loss of cell shape polarity, septal abnormality and anucleated cell formation. Deltapbp1Deltapbp2 and pbp1 null haploids were hypersensitive to calcineurin inhibitors, cyclosporin A and FK506, with which the mutants underwent arrest at post-anaphase and cell lysis. Double disruption of calcineurin and pbp1+, but not pbp2+, genes led to synthetic lethality.

CONCLUSION

The fission yeast B' subunit of PP2A plays critical roles in cell shape control and septum formation, and shares essential functions with calcineurin for viability, possibly through their roles in cytokinesis and cell wall integrity.

Cdc4p, a contractile ring protein essential for cytokinesis in Schizosaccharomyces pombe, interacts with a phosphatidylinositol 4-kinase

The proposed function of Cdc4p, an essential contractile ring protein in Schizosaccharomyces pombe, is that of a myosin essential light chain. However, five conditionally lethal cdc4 alleles exhibit complementation in diploids. Such interallelic complementation is not readily explained if the sole function of Cdc4p is that of a myosin essential light chain. Complementation of cdc4 alleles could occur only if different mutant forms can assemble into an active oligomeric complex or if Cdc4p has more than one essential function. To search for other proteins that may interact with Cdc4p, we performed a two-hybrid screen and identified two such candidates: one similar to Saccharomyces cerevisiae Vps27p and the other a putative phosphatidylinositol (PI) 4-kinase. Binding of Cdc4p to the latter and to myosin heavy chain (Myo2p) was confirmed by immunosorbent assays. Deletion studies demonstrated interaction between the Cdc4p C-terminal domain and the PI 4-kinase C-terminal domain. Furthermore, interaction was abolished by the Cdc4p C-terminal domain point mutation, Gly107 to Ser. This allele also causes failure of cytokinesis. Ectopic expression of the PI 4-kinase C-terminal domain caused cytokinesis defects that were most extreme in cells carrying the G107S allele. We suggest that Cdc4p plays multiple roles in cytokinesis and that interaction with a PI 4-kinase may be important for contractile ring assembly and/or function.

Structure of Cdc4p, a contractile ring protein essential for cytokinesis in Schizosaccharomyces pombe

The Schizosaccharomyces pombe Cdc4 protein is required for the formation and function of the contractile ring, presumably acting as a myosin light chain. By using NMR spectroscopy, we demonstrate that purified Cdc4p is a monomeric protein with two structurally independent domains, each exhibiting a fold reminiscent of the EF-hand class of calcium-binding proteins. Although Cdc4p has one potentially functional calcium-binding site, it does not bind calcium in vitro. Three variants of Cdc4p containing single point mutations responsible for temperature-sensitive arrest of the cell cycle at cytokinesis (Gly-19 to Glu, Gly-82 to Asp, and Gly-107 to Ser) were also characterized by NMR and circular dichroism spectroscopy. In each case, the amino acid substitution only leads to small perturbations in the conformation of the protein. Furthermore, thermal unfolding studies indicate that, like wild-type Cdc4p, the three mutant forms are all extremely stable, remaining completely folded at temperatures significantly above those causing failure of cytokinesis in intact cells. Therefore, the altered phenotype must arise directly from a disruption of the function of Cdc4p rather than indirectly through a disruption of its overall structure. Several mutant alleles of Cdc4p also show interallelic complementation in diploid cells. This phenomenon can be explained if Cdcp4 has more than one essential function or, alternatively, if two mutant proteins assemble to form a functional complex. Based on the structure of Cdc4p, possible models for interallelic complementation including interactions with partner proteins and the formation of a myosin complex with Cdc4p fulfilling the role of both an essential and regulatory light chain are proposed.

Two type V myosins with non-overlapping functions in the fission yeast Schizosaccharomyces pombe: Myo52 is concerned with growth polarity and cytokinesis, Myo51 is a component of the cytokinetic actin ring

The fission yeast genome project has identified five myosin genes: one type I myosin, myo1(+), two type II myosins, myo2(+) and myp2(+), and two type V myosins, myo51(+) and myo52(+). Cells deleted for myo51(+) show normal morphology and growth rates whereas deletion of myo52(+) results in a partial loss of cell polarity, slow growth and cytokinetic defects. Combining both deletions in a single strain is phenotypically non-additive, myo52(delta) being epistatic to myo51(delta). Overproduction of Myo51 gives rise to elongated cells which fail to form functional septa whereas overproduction of Myo52 results in branched cells with aberrant septa that fail to cleave. Myo52 localises to the poles of growing cells but during cell division it relocalises to the cell equator as a bar that is bisected by the cytokinetic septum. Myo51 shows no obvious localisation during interphase but at cytokinesis it is associated with the contractile cytokinetic actin ring (CAR). Both myosins are dependent upon an intact actin cytoskeleton for localisation. Myo52 partially colocalises with the (alpha)-glucan synthase Mok1 at the cell tips and to a lesser extent at the septum. Mok1 is delocalised and upregulated in myo52(delta) and myo52(delta) cell walls are resistant to digestion by the cell wall degrading enzyme zymolyase. Thus myo52(+) appears to be involved in the local delivery or positioning of vesicles containing cell wall precursors at the cell tips and has a role in the maturation or cleavage of the septum. Myo51 has a non-essential role in cytokinesis as a component of the cytokinetic actin ring.

A family of multifunctional thiamine-repressible expression vectors for fission yeast

A series of thiamine-repressible shuttle vectors has been constructed to allow a more efficient DNA manipulation in Schizosaccharomyces pombe. These high-copy-number vectors with regulatable expression (pJR) are based on the backbone of the pREP-3X, pREP-41X and pREP-81X plasmids. The pJR vectors are all uniform in structure, containing: (a) sequences for replication (ori) and selection (AmpR) in Escherichia coli; (b) the f1 ori sequence of the phage f1 for packaging of ssDNA, making them suitable for site-directed mutagenesis; and (c) the ars1 sequence for replication in S. pombe. The pJR vectors differ among them in: (a) the selectable marker (Saccharomyces cerevisiae LEU 2 gene, which complements S. pombe leu1- gene and S. pombe ura4+ and his3+ genes); (b) the thiamine-repressible nmt1 promoter (3X, 41X and 81X with extremely high, moderate or low transcription efficiency, respectively); and (c) the multiple cloning site (two multiple cloning sites, with 12 restriction sites each). The expression level of the pJR vectors has been analysed using the beta-galactosidase gene as reporter. Three levels of expression for each nmt1 promoter version, with any selectable marker and for either repressed or induced conditions, have been found. The expression is dependent on the distance to the initiation codon, varying from 0.001 to 15 times the activity characterized for the pREP plasmids. Also, the gene expression has been found to be extremely sensitive to the nucleotide sequence prior to the initiation codon, being up to 50-fold higher with an A/T sequence than with a G/C sequence. Finally, the beta-galactosidase mRNA levels were found to be similar in each nmt1 series, suggesting a translational effect on gene expression. As a result, any of these 18 new vectors allow performing gene expression in fission yeast, as well as a more versatile cloning, sequencing and mutagenesis, directly in the plasmid without the need for subcloning into intermediary vectors.

The myosin ATPase inhibitor 2,3-butanedione-2-monoxime (BDM) inhibits tip growth and cytokinesis in the fission yeast, Schizosaccharomyces pombe

The growth of fission yeast cultures was reversibly inhibited by exposure to the myosin-ATPase inhibitor 2,3-butanedione-2-monoxime (BDM). Wild-type cells treated with 20 mM BDM for approximately two generation times were smaller than untreated controls and had a septation index approximately twice that seen in the absence of the inhibitor. The organization of actin at the cell poles was somewhat disorganized in the presence of BDM; however, cells formed a cytokinetic actin ring. When nitrogen-starved stationary-phase cells were reinoculated into fresh medium in the presence of BDM, the time taken to repolarize the actin cytoskeleton and to resume the characteristic vegetative cell shape before initiation of the first cell division were both substantially delayed. BDM significantly inhibited the increase in cell length of cdc25.22 cells arrested for cell cycle progress by incubation at the restrictive temperature and substantially delayed the initiation of both mitosis and cytokinesis in arrested cdc25.22 cells after release of the temperature block. These results suggest that tip growth and cytokinesis--processes in fission yeast that involve the actin cytoskeleton--also require myosin activity.

Drc1p/Cps1p, a 1,3-beta-glucan synthase subunit, is essential for division septum assembly in Schizosaccharomyces pombe

Schizosaccharomyces pombe divides by medial fission through the use of an actomyosin-based contractile ring. A division septum is formed centripetally, concomitant with ring constriction. Although several genes essential for cytokinesis have been described previously, enzymes that participate in the assembly of the division septum have not been identified. Here we describe a temperature-sensitive mutation, drc1-191, that prevents division septum assembly and causes mutant cells to arrest with a stable actomyosin ring. Unlike the previously characterized cytokinesis mutants, which undergo multiple mitotic cycles, drc1-191 is the first cytokinesis mutant that arrests with two interphase nuclei. Interestingly, unlike drc1-191, drc1-null mutants proceed through multiple mitotic cycles, leading to the formation of large cells with many nuclei. drc1 is allelic to cps1, which encodes a 1,3-beta-glucan synthase subunit. We conclude that Drc1p/Cps1p is not required for cell elongation and cell growth, but plays an essential role in assembly of the division septum. Furthermore, it appears that constriction of the actomyosin ring might depend on assembly of the division septum. We discuss possible mechanisms that account for the differences in the phenotypes of the drc1-191 and the drc1-null mutants and also reflect the potential links between Drc1p and other cytokinesis regulators.

Ultrastructure of cell wall of the cps8 actin mutant cell in Schizosaccharomyces pombe

A Schizosaccharomyces pombe cps8 mutant, of which the gene encodes a mutant actin with an amino acid substitution of Asp for Gly(273) [J. Ishiguro and W. Kobayashi (1996) FEBS Lett. 392, 237-241], was used to determine the role of the actin cytoskeleton in cell wall formation. In the cps8 mutant cells, atomic force microscopic and scanning electron microscopic images showed abnormal depolarized and branched morphology. Fibrous material covered a part of the surface of growing cps8 cells. Transmission electron microscopic images showed variable thickness of the cell wall due to multilayering of cell wall materials, and aberrant multisepta due to diagonal growth of the primary septum, whereas the normal primary septum grows at a right angle from the cortex. This abnormal septum formation may induce abnormality of the cell with multinuclei and/or multisepta, caused by non-separation of daughter cells. These results indicate that actin plays an important role in cell wall and septum formation.

RHO GTPases in the control of cell morphology, cell polarity, and actin localization in fission yeast

The fission yeast Schizosaccharomyces pombe undergoes morphogenetic changes during both vegetative and sexual cell cycles that require asymmetric cell growth and actin cytoskeleton reorganisations. Different complex signal transduction pathways participate in S. pombe morphogenesis. The Rho family of GTPases are present in all eukaryotic cells, from yeast to mammals, and their role as key regulators in the signalling pathways that control actin organisation and morphogenetic processes is well known. In this review, we will briefly summarize the role of the Rho GTPases in the establishment and maintenance of cell polarity and growth of S. pombe. As in other fungi, S. pombe morphogenesis is closely related to cell wall biosynthesis, and Rho GTPases are critical modulators of this process. They provide the coordinated regulation of cell wall biosynthetic enzymes and actin organisation required to maintain cell integrity and polarised growth.

Identification of cold-sensitive mutations in the Schizosaccharomyces pombe actin locus

In recent years, the actin cytoskeleton in Schizosaccharomyces pombe has become the subject of intense scrutiny. However, to date, only a single actin mutation has been identified. Described here is the isolation and characterization of four new cold-sensitive actin mutations. Sequence analysis of the mutant actin genes indicated that each of these mutations caused alterations in single amino acids that are conserved in all actin sequences. These mutants differ in their phenotypes. One of these mutations (act1-48) was identified as an extragenic suppressor of a mutation in the cdc4 gene, which is required for actin ring formation and cytokinesis. Interestingly, when act1-48 mutant cells were shifted to the restrictive temperature, actin patches were not detected but the actin ring formation and stability was unaffected. The three other mutations, act1-16, act1-32 and act1-67, primarily affected the actin ring formation or stability while F-actin patches did not seem to be substantially different in appearance. Given that the ultrastructural architectures of F-actin patches and the F-actin ring are presently unclear, these mutations, which affect one structure or the other, should be useful for future studies on the role of actin itself in the function of these F-actin-containing structures in S. pombe.

Genetic control of fission yeast cell wall synthesis: the genes involved in wall biogenesis and their interactions in Schizosaccharomyces pombe

The fungal cell wall is an essential structure which protects cells from various environmental stresses such as hyper- or hypo-osmosis, and endows them with specific morphology in response to their life or cell division cycle. In addition, the cell wall has a variety of enzymatic activities per se, which are required for nutritional uptake, secretion, and cell adhesion including mating processes. In addition to these cytological interests, clinical demands to clarify the regulatory mechanisms of cell wall synthesis have been increasing, since the cell wall is a unique and effective target of antifungal agents. However, the molecular mechanisms are poorly understood at present, although the role of several signal transduction pathways have recently been implicated in regulation. In this review, the author focuses on genes and their interactions which are involved in fission yeast cell wall biogenesis.

Subcellular localization and possible function of actin, tropomyosin and actin-related protein 3 (Arp3) in the fission yeast Schizosaccharomyces pombe

We investigated subcellular localizations and interactions of actin and two actin cytoskeleton-related proteins, Cdc8 tropomyosin and actin-related protein 3, Arp3, in the fission yeast Schizosaccharomyces pombe, using specific antibodies and by gene disruption. Actin was localized to the medial microfilamentous ring in the region of the septum during cytokinesis and to cortical patches by immunoelectron microscopy. F-actin cables were detected throughout the cell cycle by fluorescent staining with Bodipy-phallacidin. Cables were often linked to the patches and to the medial ring during its formation. Tropomyosin was localized to the medial ring and the cables. It was also distributed in the cell as patches, although co-localization with F-actin was not frequent. In cdc8ts mutant cells, F-actin cables were not observed although the F-actin patches were detected and cell polarity was maintained. These observations suggest that the F-actin cables may be involved in the formation of the medial ring, and that tropomyosin plays an important role in organizing both the ring and the cable, but is not involved in the F-actin patch formation or maintenance of cell polarity. Binding of Arp3 to actin was revealed by immunoprecipitation as well as by DNase I column chromatography. Arp3 seemed to form a complex with several proteins in the cell extracts, as previously reported for other organisms. Contrary to a previous report (McCollum et al., EMBO J. 15, 6438-6446, 1996), Arp3 was found to be concentrated in the medial region from early anaphase to late cytokinesis. Following arp3 gene disruption, F-actin patches were delocalized throughout the cell and cells did not undergo polarized growth, suggesting that Arp3 influences the proper localization of the actin patches in the cell and thereby controls the polarized growth of the cell.

Cytochalasin D interferes with contractile actin ring and septum formation in Schizosaccharomyces japonicus var. versatilis

The cells of Schizosaccharomyces japonicus var. versatilis responded to the presence of cytochalasin D (CD), an inhibitor of actin polymerization, by the disappearance of contractile actin rings (ARs) that had already formed and by inhibition of new ring formation. Actin cables disappeared. Actin patches remained preserved and became co-localized with regions of actual cell wall formation (at cell poles and at the site of septum development). Removal of the AR arrested formation of the primary septum and led to the production of aberrant septum protrusions in that region. Nuclear division was accomplished in the presence of CD but new ARs were not produced. The wall (septum) material was deposited in the form of a wide band at the inner surface of the lateral cell wall in the cell centre. This layer showed a thin fibrillar structure. The removal of CD resulted in rapid formation of new ARs in the equatorial region of the cells. This implies that the signal for AR localization was not abolished either by CD effects or by removal of an AR already formed. Some of the newly developed ARs showed atypical localization and orientation. In addition, redundant, subcortically situated actin bundles were produced. The removal of CD was quickly followed by the development of primary septa co-localized with ARs. Wall protrusions occurred co-localized with the redundant actin bundles. If these were completed in a circle, redundant septa developed. The AR is a mechanism which, in time and space, triggers cytokinesis by building a septum sequentially dependent on the AR. Aberrant septa were not capable of separating daughter cells. However, non-separated daughter cells subsequently gave rise to normal cells.

The aberrant positioning of nuclei and the microtubular cytoskeleton in Saccharomyces cerevisiae due to improper actin function

An excentric position of the nuclei, random orientation of mitoses, and multinuclear budding cells were identified in part of a population of temperature-sensitive (ts) Saccharomyces cerevisiae actin mutants at the permissive temperature of 23 degrees C by fluorescence and electron microscopy. The phenotype resembled that of mutants in beta-tubulin, dynein, JNM1, NUM1, ACT3, ACT5, myosins, profilin, tropomyosin 1, SLA2 and other genes. The question was addressed whether the cause was (i) defects in cell polarity in some ts actin mutants, manifested by lack of asymmetry of actin cortical patches, or (ii) lack of cytoplasmic or astral microtubules. The results indicated that in the cells with the nuclear defects, actin cortical patches showed the normal asymmetric distribution typical of undisturbed polarity. Cytoplasmic astral and spindle microtubules were also preserved. The principal difference found between the wild-type and actin mutant cells was in actin cables, which in the actin mutants were developed insufficiently. It is suggested that actin cables serve as a 'suspensory apparatus' and/or 'intracellular corridor', predetermining: the location of the nucleus in the central position in interphase; the axis of nuclear movement to the bud neck before mitosis; the direction of the elongating nucleus during mitosis; and the motion of each nucleus from an excentric to a central position during cytokinesis, in cooperation with the above-mentioned and other gene products.

The yeast cytoskeleton: the closer We look, the more We See

May, K. M., and Hyams, J. S. 1998. The yeast cytoskeleton: The closer we look, the more we see. Copyright 1998 Academic Press.

Dynamics of cell wall formation in fission yeast, Schizosaccharomyces pombe

Studies on the dynamics of surface and intracellular structures during cell wall formation from the reverting protoplast of Schizosaccharomyces pombe were reviewed, and the correlation between cell wall formation and actin cytoskeleton, which is the most important conductor of the mechanism, is described in this paper. A close spatial and temporal relationship between actin cytoskeleton and cell wall formation was found by using wild type and actin point-mutant cps8 of S. pombe. Concomitant with the cell wall formation, dynamic behavior of the intracellular secretion machinery, especially the Golgi apparatus and secretory vesicles, was analyzed by three-dimensional reconstruction of 40 to 80 serial sections at five reverting stages. Total reverting protoplast volume increased by 3.8 and 4.3 times at 3 and 5 h, respectively, and the volume of the Golgi apparatus in the corresponding stages increased 2.3- and 2. 5-fold over the same periods. The number of secretory vesicles also markedly increased by 3.4 and 5.8 times over that of the corresponding reverting protoplasts. Actin point-mutant cps8 cells have abnormal structure in the cell wall and septum, and the distribution pattern of the actin cytoskeleton during the reversion process was different from wild-type protoplasts. The profiles of actin showed one or two thick cables and patches in the cytoplasm which remained throughout reversion. The development of crosslinkage of the glucan fibrils which are beta-1,3-glucan in nature on the reverting protoplast surface was defective; the glucan networks consisted of thin, rope-shaped fibrils up to 30 nm in width which formed a ribbon-shape 200 nm wide in wild-type reverting protoplasts. The intrafibrillar space is not filled with amorphous particles of alpha-galactomannan in nature. The secretion machinery was seen to have a similar profile as the wild type. The above results suggest that actin cytoskeleton may control secretion of beta-1,6-glucan and other cell wall substances such as alpha-glucan and alpha-galactomannan rather than beta-1,3-glucan. Study of the role of actin cytoskeleton in the cell wall formation is contributing to the development of antifungal agents together with basic cell biology.

The ultrastructure of yeast: cell wall structure and formation

Yeasts are unicellular eukaryotes, and are used widely as a model system in basic and applied fields of life science, medicine, and biotechnology. The ultrastructure of yeast cells was first studied in 1957 and the techniques used have advanced greatly in the 40 years since then; an overview of these methods is first presented in this review. The ultrastructure of budding and dimorphic yeast cells observed with a scanning electron microscope (SEM) and a transmission electron microscope (TEM) after thin sectioning and freeze-etching are then described, followed by discussion of the regeneration of the cell wall of Candida albicans protoplasts detected by cryosectioning. C. albicans protoplasts are regenerated to synthesize microfibrils on their surface. They are aggregated into thicker bundles which are intermeshed, forming a wide-meshed network of long fibrils. These microfibrillar structures are chains of beta-1,3-glucan which are broken down after treatment with beta-1,3-glucanase. Morphologically identical microfibrils are synthesized in vitro by a cell-free system in which the active cell membrane fraction as a source of beta-1,3-glucan synthetase and UDP glucose as the sole substrate are used. The diameter of an elemental fibril of beta-glucan is estimated to be 2.8 nm from the pattern of autocorrelation of the image obtained by computer processing. In contrast, in the presence of aculeacin A the formation of normal fibrillar nets or bundles is significantly inhibited, resulting in the occurrence of short fibrils. These electron microscopic data suggest that aculeacin A inhibits not only the synthesis of beta-1,3-glucan but the aggregation of microfibrils of this polysaccharide, allowing formation of the crystalline structure. On the basis of the cumulative data obtained from the electron microscopic studies, we are led to the assumption that de novo synthesized beta-glucan chains might initially form fine particles which are then transformed into thin fibrils with single to multiple strands which appear to be oriented parallel to each other so that they develop into fibrillar structures. This process of assembly of beta-glucan molecules leads to the development of a fibrous network within the regenerating Candida cell wall. Third, the mechanism of cell wall formation is shown by low-voltage (LV) SEM and TEM, using various techniques and computer graphics, of the regeneration system of Schizosaccharomyces pombe protoplasts: after 10 min of regeneration, the protoplasts begin to grow fibrillar substances of a beta-glucan nature, and a fibrillar network covers the surface of all protoplasts. The network is originally formed as fine particles on the protoplast surface and these are subsequently lengthened to microfibrils 2 nm thick. The microfibrils twist around each other and develop into 8 nm thick fibrils forming flat bundles 16 nm thick. Interfibrillar spaces are gradually filled with amorphous particles of an alpha-galactomannan nature and, finally, the complete cell wall is formed after 12 h. Treatment of reverting protoplasts with RuO4 provided clear TEM images of glucan fibrils with high electron density. The relationship between cell wall regeneration and intracellular organelles was examined by using serial thin sections stained with PATAg and computer-aided three-dimensional reconstruction. The secretory vesicles in a protoplast had increased markedly by 1.4, 3.4, and 5.8 times at 1.5, 3.0, and 5 h, respectively. Three-dimensional analysis indicates that Golgi apparatuses are located close together in the nucleus of the protoplast and are dispersed into the cytoplasm during the progress of cell wall formation.

Identification of Myo3, a second type-II myosin heavy chain in the fission yeast Schizosaccharomyces pombe

We cloned the myo3+ gene of Schizosaccharomyces pombe which encodes a type-II myosin heavy chain. myo3 null cells showed a defect in cytokinesis under certain conditions. Overproduction of Myo3 also showed a defect in cytokinesis. Double mutant analysis indicated that Myo3 genetically interacts with Cdc8 tropomyosin and actin. Myo3 may be implicated in cytokinesis and stabilization of F-actin cables. Moreover, the function of Myo2 can be replaced by overexpressed Myo3. We observed a modest synthetic interaction between Myo2 and Myo3. Thus, Myo2 and Myo3 seem to cooperate in the formation of the F-actin ring in S. pombe.