Mechanical suitability of glycerol-preserved human dura mater for construction of prosthetic cardiac valves

Biomimetic and Nonbiomimetic Approaches in Dura Substitutes: The Influence of Mechanical Properties

The dura mater, the furthest and strongest layer of the meninges, is crucial for protecting the brain and spinal cord. Its biomechanical behavior is vital, as any alterations can compromise biological functions. In recent decades, interest in the dura mater has increased due to the need for hermetic closure of dural defects prompting the development of several substitutes. Collagen-based dural substitutes are common commercial options, but they lack the complex biological and structural elements of the native dura mater, impacting regeneration and potentially causing complications like wound/postoperative infection and cerebrospinal fluid (CSF) leakage. To face this issue, recent tissue engineering approaches focus on creating biomimetic dura mater substitutes. The objective of this review is to discuss whether mimicking the mechanical properties of native tissue or ensuring high biocompatibility and bioactivity is more critical in developing effective dural substitutes, or if both aspects should be systematically linked. After a brief description of the properties and architecture of the native cranial dura, we describe the advantages and limitations of biomimetic dura mater substitutes to better understand their relevance. In particular, we consider biomechanical properties' impact on dura repair's effectiveness. Finally, the obstacles and perspectives for developing the ideal dural substitute are explored.

Investigation of direction- and age-dependent prestretch in mouse cranial dura mater

Cranial dura mater is a dense interwoven vascularized connective tissue that helps regulate neurocranial remodeling by responding to strains from the growing brain. Previous ex vivo experimentation has failed to account for the role of prestretch in the mechanical behavior of the dura. Here we aim to estimate the prestretch in mouse cranial dura mater and determine its dependency on direction and age. We performed transverse and longitudinal incisions in parietal dura excised from newborn (day ∼ 4) and mature (12 weeks) mice and calculated the ex vivo normalized incision opening (measured width over length). Then, similar incisions were simulated under isotropic stretching within Abaqus/Standard. Finally, prestretch was estimated by comparing the ex vivo and in silico normalized openings. There were no significant differences between the neonatal and adult mice when comparing cuts in the same direction, but adult mice were found to have significantly greater stretch in the anterior-posterior direction than in the medial-lateral direction, while neonatal dura was essentially isotropic. Additionally, our simulations show that increasing curvature impacts the incision opening, indicating that flat in silico models may overestimate prestretch.

Morpho-mechanical mapping of human dura mater microstructure

The human dura mater is known to impact vastly traumatic brain injury mechanopathology. In spite of this involvement, dura mater is typically neglected in computational and physical human head models. The lack of location-dependent microstructural and related mechanical data of dura mater may be considered a rationale behind this simplification. The anisotropic nature of dura mater under various loading conditions so far remains unelucidated. Furthermore, principal collagen fiber orientation is yet to be quantified for a morpho-mechanically-informed material model on the dura mater. This study aims to assess how location-dependent mechanical anisotropy is linked to principal collagen fiber orientation. Uniaxial extension tests were performed in a heated tissue bath for 60 samples from six individuals and correlated to the three-dimensional collagen structure in four individuals using second-harmonic generation (SHG) imaging. Failure stress and stretch at failure, elastic modulus, and a microstructurally motivated material model were integrated to examine local differences in dura mater morpho-mechanics. The quantitative observation of collagen fiber orientation and dispersion confirmed that collagen is highly aligned in the human dura mater and that both fiber orientation and dispersion differ depending on the location investigated. This observation provides a possible explanation for the previously observed isotropic mechanical behavior, as the main collagen fiber direction is not oriented along the anterior-posterior or medial-lateral direction at most of the mapped locations. Additionally, these site-dependent structural properties have implications for the mechanical load response and therefore potentially for the regional functions dura mater has to fulfill. The here chosen non-symmetrical fiber dispersion material model fits the data well and provides a comprehensive parameter base for further studies and future finite element models. STATEMENT OF SIGNIFICANCE: The human dura mater greatly affects traumatic brain injury mechanisms, but it is often ignored in computational and physical head models. This is because there is a lack of detailed microstructural and mechanical data specific to the dura mater. Its anisotropic nature and collagen fiber orientation have not been fully understood, hindering the development of an accurate material model. Hence, this study combines morphological data on collagen fiber orientation and dispersion at multiple locations of human cranial dura mater, and links microstructure to location-specific load-displacement behavior. It provides microstructurally informed mechanical information towards realistic head models for predicting location-dependent tissue behavior and failure for assessing brain injury and graft material development.

FAST (Flexible Acetylcholine Sensing Thread): Real-Time Detection of Acetylcholine with a Flexible Solid-Contact Potentiometric Sensor

Acetylcholine (ACh) is involved in memory and learning and has implications in neurodegenerative diseases; it is therefore important to study the dynamics of ACh in the brain. This work creates a flexible solid-contact potentiometric sensor for in vitro and in vivo recording of ACh in the brain and tissue homogenate. We fabricate this sensor using a 250 μm diameter cotton yarn coated with a flexible conductive ink and an ACh sensing membrane that contains a calix[4]arene ionophore. The exposed ion-to-electron transducer was sealed with a 2.5 μm thick Parylene C coating to maintain the flexibility of the sensor. The resulting diameter of the flexible ACh sensing thread (FAST) was 400 μm. The FAST showed a linear response range from 1.0 μM to 10.0 mM in deionized water, with a near-Nernstian slope of 56.11 mV/decade and a limit of detection of 2.6 μM. In artificial cerebrospinal fluid, the limit of detection increased to 20 μM due to the background signal of ionic content of the cerebrospinal fluid. The FAST showed a signal stability of 226 μV/h over 24 h. We show that FAST can measure ACh dynamics in sheep brain tissue and sheep brain homogenate after ACh spiking. FAST is the first flexible electrochemical sensor for monitoring ACh dynamics in the brain.

Dynamic changes in mechanical properties of the adult rat spinal cord after injury

Spinal cord injury (SCI), a debilitating medical condition that can cause irreversible loss of neurons and permanent paralysis, currently has no cure. However, regenerative medicine may offer a promising treatment. Given that numerous regenerative strategies aim to deliver cells and materials in the form of tissue-engineered therapies, understanding and characterising the mechanical properties of the spinal cord tissue is very important. In this study, we have systematically characterised the spatiotemporal changes in elastic stiffness (elastic modulus, Pa) and viscosity (drop in peak force, %) of injured rat thoracic spinal cord tissues at distinct time points after crush injury using the indentation technique. Our results demonstrate that in comparison with uninjured spinal cord tissue, the injured tissues exhibited lower stiffness (median 3281 Pa versus 9632 Pa; P < 0.001) but demonstrated elevated viscosity (median 80% versus 57%; P < 0.001) at 3 days postinjury. Between 4 and 6 weeks after SCI, the overall viscoelastic properties of injured tissues returned to baseline values. At 12 weeks after SCI, in comparison with uninjured tissue, the injured spinal cord tissues displayed a significant increase in both elasticity (median 13698 Pa versus 9920 Pa; P < 0.001) and viscosity (median 64% versus 58%; P < 0.001). This work constitutes the first quantitative mapping of spatiotemporal changes in spinal cord tissue elasticity and viscosity in injured rats, providing a mechanical basis of the tissue for future studies on the development of biomaterials for SCI repair. STATEMENT OF SIGNIFICANCE: Spinal cord injury (SCI) is a devastating disease often leading to permanent paralysis. While enormous progress in understanding the molecular pathomechanisms of SCI has been made, the mechanical properties of injured spinal cord tissue have received considerably less attention. This study provides systematic characterization of the biomechanical evolution of rat spinal cord tissue after SCI using a microindentation test method. We find spinal cord tissue behaves significantly softer but more viscous immediately postinjury. As time passes, the lesion site gradually returns to baseline values and then displays pronounced increased viscoelastic properties. As host tissue mechanical properties are a crucial consideration for any biomaterial implanted into central nervous system, our results may have important implications for further studies of SCI repair.

Potential use of bioactive nanofibrous dural substitutes with controlled release of IGF-1 for neuroprotection after traumatic brain injury

For patients suffering from traumatic brain injury (TBI), the closure of dural defects after decompressive craniectomy is the prerequisite to restoring normal physiological functions. It is also an urgent challenge to provide a neuroprotection effect against the primary and secondary nerve damage during long-term recovery. To solve these issues, we herein develop a class of bioactive, nanofibrous dural substitutes that can long-term release insulin-like growth factor 1 (IGF-1) for improving the survival and neurite outgrowth of neural cells after TBI. Such dural substitutes were polycaprolactone (PCL) nanofibers encapsulated with hyaluronic acid methacryloyl (HAMA)/IGF-1 by blend or coaxial electrospinning techniques, achieving bioactive PCL/HAMA/IGF nanofibrous dural substitutes with different release profiles of IGF-1. The nanofibrous dural substitutes exhibited good mechanical properties and hydrophobicity, which prevent cerebrospinal fluid leakage, maintain normal intracranial pressure, and avoid external impact on the brain. We also found that the viability and neurite outgrowth of SH-SY5Y cells and primary neurons were significantly enhanced after neurite transection or oxygen and glucose deprivation treatment. Taken together, such PCL/HAMA/IGF nanofibrous dural substitutes hold promising potential to provide neuroprotection effects after primary and secondary nerve damage in TBI, which would bring significant benefits to the field of neurosurgery involving the use of artificial dura mater.

Modelling of the dilated sagittal sinuses found in multiple sclerosis suggests increased wall stiffness may be a contributing factor

The cross-sectional area of the superior sagittal sinus (SSS) is larger in multiple sclerosis than normal and correlates with disease severity and progression. The sinus could be enlarged due to a decrease in the pressure difference between the lumen and the subarachnoid space, an increase in wall thickness or increased wall stiffness. The cross-sectional area of the SSS and straight sinus (ST) were measured in 103 patients with multiple sclerosis and compared to 50 controls. The cross-sectional area of the SSS and ST were increased by 20% and 13% compared to the controls (p = 0.005 and 0.02 respectively). The deflection of the wall of the sinus was estimated. The change in pressure gradient, wall thickness or elastic modulus between groups was calculated by modelling the walls as simply supported beams. To account for these findings, the modelling suggests either a 70% reduction in transmural venous pressure or a 2.4 fold increase in SSS wall stiffness plus an 11% increase in wall thickness or a combination of changes. An increase in sinus pressure, although the most straight forward possibility to account for the change in sinus size may exist in only a minority of patients. An increase in sinus wall stiffness and thickness may need further investigation.

Systematic review and meta-analysis of the biomechanical properties of the human dura mater applicable in computational human head models

Accurate biomechanical properties of the human dura mater are required for computational models and to fabricate artificial substitutes for transplantation and surgical training purposes. Here, a systematic literature review was performed to summarize the biomechanical properties of the human dura mater that are reported in the literature. Furthermore, anthropometric data, information regarding the mechanically tested samples, and specifications with respect to the used mechanical testing setup were extracted. A meta-analysis was performed to obtain the pooled mean estimate for the elastic modulus, ultimate tensile strength, and strain at maximum force. A total of 17 studies were deemed eligible, which focused on human cranial and spinal dura mater in 13 and 4 cases, respectively. Pooled mean estimates for the elastic modulus (n = 448), the ultimate tensile strength (n = 448), and the strain at maximum force (n = 431) of 68.1 MPa, 7.3 MPa and 14.4% were observed for native cranial dura mater. Gaps in the literature related to the extracted data were identified and future directions for mechanical characterizations of human dura mater were formulated. The main conclusion is that the most commonly used elastic modulus value of 31.5 MPa for the simulation of the human cranial dura mater in computational head models is likely an underestimation and an oversimplification given the morphological diversity of the tissue in different brain regions. Based on the here provided meta-analysis, a stiffer linear elastic modulus of 68 MPa was observed instead. However, further experimental data are essential to confirm its validity.

Mechanical properties of porcine spinal dura mater and pericranium

BACKGROUND

The objective of this study was to characterize and compare the mechanical properties of porcine pericranium and spinal dura mater, to evaluate the mechanical suitability of pericranium as a dural graft.

METHOD

Eighty-eight spinal dura (cervical, thoracic, and lumbar regions, in ventral longitudinal, dorsal longitudinal and circumferential orientations) and eighteen pericranium samples (ventral-dorsal, and lateral orientations) from four pigs, were harvested and subjected to uniaxial loading while hydrated. The stiffness, strain at toe-linear regions transition, strain at linear-yield regions transition and other structural and mechanical properties were measured. Stress-strain curves were fitted to a one-term Ogden model and Ogden parameters were calculated. Linear regression models with cluster-robust standard errors were used to assess the effect of region and orientation on material and structural properties.

RESULTS

Both spinal dura and pericranium exhibited distinct anisotropy and were stiffer in the longitudinal direction. The tissues exhibited structural and mechanical similarities especially in terms of stiffness and strains in the linear region. Stiffness ranged from 1.28 to 5.32 N/mm for spinal dura and 2.42-3.90 N/mm for pericranium. In the circumferential and longitudinal directions, the stiffness of spinal dura specimens was statistically similar to that of pericranium in the same orientation. The strain at the upper bound of the linear region of longitudinal pericranium (28.0%) was statistically similar to that of any spinal dura specimens (24.4-32.9%).

CONCLUSIONS

Autologous pericranium has advantageous physical properties for spinal duraplasty. The present study demonstrated that longitudinally oriented pericranium is mechanically compatible with spinal duraplasty procedures. Autologous pericranium grafts will likely support the mechanical loads transmitted from the spinal dura, but further biomechanical analyses are required to study the effect of the lower yield strain of circumferential pericranium compared to spinal dura. Finally, the Ogden parameters calculated for pericranium, and the spinal dura at each spinal level, will be useful for computational models incorporating these soft tissues.

Mechanical characterisation of the human dura mater, falx cerebri and superior sagittal sinus

The cranial meninges have been shown to play a pivotal role in traumatic brain injury mechanopathology. However, while the mechanical response of the brain and its many subregions have been studied extensively, the meninges have conventionally been overlooked. This paper presents the first comparative mechanical analysis of human dura mater, falx cerebri and superior sagittal sinus tissues. Biaxial tensile analysis identified that these tissues are mechanically heterogeneous, in contrast to the assumption that the tissues are mechanically homogeneous which is typically employed in FE model design. A thickness of 0.91 ± 0.05 (standard error) mm for the falx cerebri was also identified. This data can aid in improving the biofidelity of the influential falx structure in FE models. Additionally, the use of a collagen hybridizing peptide on the superior sagittal sinus suggests this structure is particularly susceptible to the effects of circumferential stretch, which may have important implications for clinical treatment of dural venous sinus pathologies. Collectively, this research progresses understanding of meningeal mechanical and structural characteristics and may aid in elucidating the behaviour of these tissues in healthy and diseased conditions. STATEMENT OF SIGNIFICANCE: This study presents the first evaluation of human falx cerebri and superior sagittal sinus mechanical, geometrical and structural properties, along with a comparison to cranial dura mater. To mechanically characterise the tissues, biaxial tensile testing is conducted on the tissues. This analysis identifies, for the first time, mechanical stiffness differences between these tissues. Additionally, geometrical analysis identifies that there are thickness differences between the tissues. The evaluation of human meningeal tissues allows for direct implementation of the novel data to finite element head injury models to enable improved biofidelity of these influential structures in traumatic brain injury simulations. This work also identifies that the superior sagittal sinus may be easily damaged during clinical angioplasty procedures, which may inform the treatment of dural sinus pathologies.

Biomechanics of vascular areas of the human cranial dura mater

Accurate biomechanical properties of the human cranial dura mater are paramount for computational head models, artificial graft developments and biomechanical basic research. Yet, it is unclear whether areas of the dura containing meningeal vessels biomechanically differ from avascular areas. Here, 244 dura mater samples with or without vessels from 32 cadavers were tested in a quasi-static uniaxial tensile testing setup. The thicknesses of the meningeal and periosteal dura in vascular and avascular areas were histologically investigated in 36 samples using van Gieson staining. The elastic modulus of 112 MPa from dura samples containing vessels running transversely was significantly lower than samples with vessels running longitudinally (151 MPa; p < 0.001). The ultimate tensile strength of dura samples with transversely running vessels (11.1 MPa) was significantly lower in comparison to both avascular samples (14.9 MPa; p < 0.001) and samples with a longitudinally running vessel (15.0 MPa; p < 0.001). The maximum force of dura samples with longitudinally running vessels was 37 N (p < 0.001), this was significantly higher compared to the other groups which were 23 N (p < 0.001). The meningeal and periosteal dura layer thicknesses were not statistically different in avascular areas (p > 0.222). However, around the vessels, the meningeal dura layer was significantly thicker compared to the periosteal layer (p ≤ 0.019). The sum of the meningeal and periosteal layers was similar between vascular and avascular areas (p ≥ 0.071). Vascular areas of the human cranial dura mater withstand the same forces as avascular areas when being stretched. When stretched along the vessel, the dura-vessel composite can withstand even higher tensile forces compared to avascular areas. Vascular areas of the cranial dura mater seem to be similar when compared to avascular areas making their separate simulation in computational models non-essential.

A biomimetic triple-layered biocomposite with effective multifunction for dura repair

Dura mater defect and subsequent cerebrospinal fluid (CSF) leakage usually appear in trauma or neurosurgical procedures and are followed by a series of serious complications and even death. The use of a qualified dura mater substitute with multifunction of leakage blockade, adhesion prevention, and dura reconstruction is one of the promising treatment methods. However, even though some products have been used in the clinic, none of the substitutes achieved the required multifunction. In this study, we aimed to design and fabricate a dura repair composite with the ideal multifunction. By biomimicking the structure and component of natural dura, we applied poly(L-lactic acid) (PLLA), chitosan (CS), gelatin, and acellular small intestinal submucosa (SIS) powders to successfully prepare a triple-layered composite. Then, a series of specific devices and techniques were developed to investigate the performance. The results revealed that satisfactory structural stability could be realized under good synergistic interactions among the components. In addition, all the findings suggested that the bionic triple-layered composite showed satisfactory multifunction of leakage blockade, adhesion prevention, antibacterial property, and dura reconstruction potential, and thus, it might be a promising candidate for dura repair. STATEMENT OF SIGNIFICANCE: Developing qualified dura mater substitutes with multifunction of leakage blockade, adhesion prevention, and dura reconstruction is crucial for treating dura mater defect and subsequent cerebrospinal fluid (CSF) leakage that appear in trauma or neurosurgical procedures. In this study, we designed and fabricated a triple-layered dura repair biocomposite with satisfactory structural stability and desired multifunction based on biomimicking of the structure and component of natural dura. Moreover, a series of specific devices and techniques were developed to investigate the relevant performance. Overall, the developed hydrogel electrospinning system exhibited excellent advantages in achieving multifunction and could be applied widely in the future to achieve multifunctional tissue repair materials.

A comparison of insertion methods for surgical placement of penetrating neural interfaces

Many implantable electrode arrays exist for the purpose of stimulating or recording electrical activity in brain, spinal, or peripheral nerve tissue, however most of these devices are constructed from materials that are mechanically rigid. A growing body of evidence suggests that the chronic presence of these rigid probes in the neural tissue causes a significant immune response and glial encapsulation of the probes, which in turn leads to gradual increase in distance between the electrodes and surrounding neurons. In recording electrodes, the consequence is the loss of signal quality and, therefore, the inability to collect electrophysiological recordings long term. In stimulation electrodes, higher current injection is required to achieve a comparable response which can lead to tissue and electrode damage. To minimize the impact of the immune response, flexible neural probes constructed with softer materials have been developed. These flexible probes, however, are often not strong enough to be inserted on their own into the tissue, and instead fail via mechanical buckling of the shank under the force of insertion. Several strategies have been developed to allow the insertion of flexible probes while minimizing tissue damage. It is critical to keep these strategies in mind during probe design in order to ensure successful surgical placement. In this review, existing insertion strategies will be presented and evaluated with respect to surgical difficulty, immune response, ability to reach the target tissue, and overall limitations of the technique. Overall, the majority of these insertion techniques have only been evaluated for the insertion of a single probe and do not quantify the accuracy of probe placement. More work needs to be performed to evaluate and optimize insertion methods for accurate placement of devices and for devices with multiple probes.

Mechanical Properties of the Cranial Meninges: A Systematic Review

The meninges are membranous tissues that are pivotal in maintaining homeostasis of the central nervous system. Despite the importance of the cranial meninges in nervous system physiology and in head injury mechanics, our knowledge of the tissues' mechanical behavior and structural composition is limited. This systematic review analyzes the existing literature on the mechanical properties of the meningeal tissues. Publications were identified from a search of Scopus, Academic Search Complete, and Web of Science and screened for eligibility according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The review details the wide range of testing techniques employed to date and the significant variability in the observed experimental findings. Our findings identify many gaps in the current literature that can serve as a guide for future work for meningeal mechanics investigators. The review identifies no peer-reviewed mechanical data on the falx and tentorium tissues, both of which have been identified as key structures in influencing brain injury mechanics. A dearth of mechanical data for the pia-arachnoid complex also was identified (no experimental mechanics studies on the human pia-arachnoid complex were identified), which is desirable for biofidelic modeling of human head injuries. Finally, this review provides recommendations on how experiments can be conducted to allow for standardization of test methodologies, enabling simplified comparisons and conclusions on meningeal mechanics.

Multilayered Artificial Dura-Mater Models for a Minimally Invasive Brain Surgery Simulator

In this study, new artificial dura-mater models were developed using a multilayered structure of a rubber material (represent an elastic component of a dura-mater) and a fiber sheet (represent fiber component of a dura-mater). The artificial dura-mater models were prepared for use in a brain surgery simulator, especially for transnasal pituitary surgery. The mechanical characteristics of the artificial dura-mater models were tested to check the similarities with porcine dura-mater. Tensile stress, viscoelasticity, and the cutting force generated by microscissors were tested to evaluate the fabricated models. Neurosurgeons also assessed the dura-mater models to evaluate their characteristics. The results indicate that these models made of two different non-woven fiber sheets emulated accurately the actual dura-mater.

What is Considered a Variation of Biomechanical Parameters in Tensile Tests of Collagen-Rich Human Soft Tissues? - Critical Considerations Using the Human Cranial Dura Mater as a Representative Morpho-Mechanic Model

Background and Objectives: Profound knowledge on the load-dependent behavior of human soft tissues is required for the development of suitable replacements as well as for realistic computer simulations. Regarding the former, e.g., the anisotropy of a particular biological tissue has to be represented with site- and direction-dependent particular mechanical values. Contrary to this concept of consistent mechanical properties of a defined soft tissue, mechanical parameters of soft tissues scatter considerably when being determined in tensile tests. In spite of numerous measures taken to standardize the mechanical testing of soft tissues, several setup- and tissue-related factors remain to influence the mechanical parameters of human soft tissues to a yet unknown extent. It is to date unclear if measurement extremes should be considered a variation or whether these data have to be deemed incorrect measurement outliers. This given study aimed to determine mechanical parameters of the human cranial dura mater as a model for human soft tissues using a highly standardized protocol and based on this, critically evaluate the definition for the term mechanical "variation" of human soft tissue. Materials and Methods: A total of 124 human dura mater samples with an age range of 3 weeks to 94 years were uniformly retrieved, osmotically adapted and mechanically tested using customized 3D-printed equipment in a quasi-static tensile testing setup. Scanning electron microscopy of 14 samples was conducted to relate the mechanical parameters to morphological features of the dura mater. Results: The here obtained mechanical parameters were scattered (elastic modulus = 46.06 MPa, interquartile range = 33.78 MPa; ultimate tensile strength = 5.56 MPa, interquartile range = 4.09 MPa; strain at maximum force = 16.58%, interquartile range = 4.81%). Scanning electron microscopy revealed a multi-layered nature of the dura mater with varying fiber directions between its outer and inner surface. Conclusions: It is concluded that mechanical parameters of soft tissues such as human dura mater are highly variable even if a highly standardized testing setup is involved. The tissue structure and composition appeared to be the main contributor to the scatter of the mechanical parameters. In consequence, mechanical variation of soft tissues can be defined as the extremes of a biomechanical parameter due to an uncontrollable change in tissue structure and/or the respective testing setup.

Mechanical Characterization and Modeling of the Porcine Cerebral Meninges

The cerebral meninges, made up of the dura, arachnoid, and pia mater, is a tri-layer membrane that surrounds the brain and the spinal cord and has an important function in protecting the brain from injury. Understanding its mechanical behavior is important to ensure the accuracy of finite element (FE) head model simulations which are commonly used in the study of traumatic brain injury (TBI). Mechanical characterization of freshly excised porcine dura-arachnoid mater (DAM) was achieved using uniaxial tensile testing and bulge inflation testing, highlighting the dependency of the identified parameters on the testing method. Experimental data was fit to the Ogden hyperelastic material model with best fit material parameters of μ = 450 ± 190 kPa and α = 16.55 ± 3.16 for uniaxial testing, and μ = 234 ± 193 kPa and α = 8.19 ± 3.29 for bulge inflation testing. The average ultimate tensile strength of the DAM was 6.91 ± 2.00 MPa (uniaxial), and the rupture stress at burst was 2.08 ± 0.41 MPa (inflation). A structural analysis using small angle light scattering (SALS) revealed that while local regions of highly aligned fibers exist, globally, there is no preferred orientation of fibers and the cerebral DAM can be considered to be structurally isotropic. This confirms the results of the uniaxial mechanical testing which found that there was no statistical difference between samples tested in the longitudinal and transversal direction (p = 0.13 for μ, p = 0.87 for α). A finite element simulation of a craniotomy procedure following brain swelling revealed that the mechanical properties of the meninges are important for predicting accurate stress and strain fields in the brain and meninges. Indeed, a simulation using a common linear elastic representation of the meninges was compared to the present material properties (Ogden model) and the intracranial pressure was found to differ by a factor of 3. The current study has provided researchers with primary experimental data on the mechanical behavior of the meninges which will further improve the accuracy of FE head models used in TBI.

In vivo estimation of optic nerve sheath stiffness using noninvasive MRI measurements and finite element modeling

The optic nerve sheath (ONS) is biomechanically important. It is acted on by tension due to ocular movements, and by fluid shifts and/or alterations in intracranial pressure (ICP) in human disease, specifically in pathologies leading to intracranial hypertension. It has also been hypothesized that the ONS is acted on by altered ICP in astronauts exposed chronically to microgravity. However, a non-invasive method to quantify ONS biomechanical properties is not presently available; knowledge of such properties is desirable to allow characterization of the biomechanical forces exerted on the optic nerve head and other ocular structures due to the ONS. Thus, the primary objective of this study was to characterize the biomechanical properties (stiffness) of the human ONS in vivo as a necessary step towards investigating the role of ICP in various conditions, including Spaceflight Associated Neuro-ocular Syndrome (SANS). We acquired non-invasive magnetic resonance imaging (MRI) scans of ostensibly healthy subjects (n = 18, age = 30.4 ± 11.6 [mean ± SD] years) during supine and 15-degree head-down-tilt (HDT) postures, and extracted ONS contours from these scans. We then used finite element modeling to quantify ONS expansion due to postural changes and an inverse approach to estimate ONS stiffness. Using this non-invasive procedure, we estimated an in vivo ONS stiffness of 39.2 ± 21.9 kPa (mean ± SD), although a small subset of individuals had very stiff ONS that precluded accurate estimates of their stiffness values. ONS stiffness was not correlated with age and was higher in males than females.

Mechanical Properties of Human Dura Mater in Tension - An Analysis at an Age Range of 2 to 94 Years

Realistic human head models are of great interest in traumatic brain injury research and in the forensic pathology courtroom and teaching. Due to a lack of biomechanical data, the human dura mater is underrepresented in head models. This study provides tensile data of 73 fresh human cranial dura mater samples retrieved from an area between the anterior middle and the posterior middle meningeal artery. Tissues were adapted to their native water content using the osmotic stress technique. Tensile tests were conducted under quasi-static uniaxial testing conditions with simultaneous digital image correlation. Human temporal dura mater is mechanically highly variable with regards to its elastic modulus of 70 ± 44 MPa, tensile strength of 7 ± 4 MPa, and maximum strain of 11 ± 3 percent. Mechanical properties of the dura mater did not vary significantly between side nor sex and decreased with the age of the cadaver. Both elastic modulus and tensile strength appear to have constant mechanical parameters within the first 139 hours post mortem. The mechanical properties provided by this study can help to improve computational and physical human head models. These properties under quasi-static conditions do not require adjustments for side nor sex, whereas adjustments of tensile properties accompanied with normal aging may be of interest.

Comparison of Biomechanical Properties of Dura Mater Substitutes and Cranial Human Dura Mater : An In Vitro Study

Objective

The aim of this study was to investigate the biomechanical differences between human dura mater and dura mater substitutes to optimize biomimetic materials.

Methods

Four groups were investigated. Group I used cranial dura mater (n=10), group II used Gore-Tex^® Expanded Cardiovascular Patch (W.L. Gore & Associates Inc., Flagstaff, AZ, USA) (n=6), group III used Durepair^® (Medtronic Inc., Goleta, CA, USA) (n=6), and group IV used Tutopatch^® (Tutogen Medical GmbH, Neunkirchen am Brand, Germany) (n=6). We used an axial compression machine to measure maximum tensile strength.

Results

The mean tensile strengths were 7.01±0.77 MPa for group I, 22.03±0.60 MPa for group II, 19.59±0.65 MPa for group III, and 3.51±0.63 MPa for group IV. The materials in groups II and III were stronger than those in group I. However, the materials in group IV were weaker than those in group I.

Conclusion

An important dura mater graft property is biomechanical similarity to cranial human dura mater. This biomechanical study contributed to the future development of artificial dura mater substitutes with biomechanical properties similar to those of human dura mater.

Biomechanical Properties of the Cranial Dura Mater with Puncture Defects : An In Vitro Study

Objective

The primary aim of this investigation was to explore the nature of dura mater biomechanics following the introduction of puncture defect(s).

Methods

Twenty-eight dura mater specimens were collected during autopsy from the department of forensic medicine of the authors' institution. Specimens were divided randomly into one of four groups : group I (cranial dura mater; n=7), group II (cranial dura mater with one puncture defect; n=7); group III (cranial dura mater with two puncture defects; n=7), and group IV (cranial dura mater with three puncture defects; n=7).

Results

The mean±standard deviation tensile strengths of the dura mater were 8.35±3.16, 8.22±3.32, 7.13±1.77, and 6.94±1.93 MPa for groups I, II, III, and IV, respectively. There was no statistical difference between all groups. A single, two or more punctures of the dura mater using a 20-gauge Quincke needle did not affect cranial dura tensile strength.

Conclusion

This biomechanical study may contribute to the future development of artificial dura mater substitutes and medical needles that have a lower negative impact on the biomechanical properties of dura mater.

Comparison of the sagittal sinus cross-sectional area between patients with multiple sclerosis, hydrocephalus, intracranial hypertension and spontaneous intracranial hypotension: a surrogate marker of venous transmural pressure?

There is evidence that patients with multiple sclerosis (MS) and hydrocephalus share some common pathophysiological mechanisms. Alterations in CSF pressure are known to affect cerebral venous sinus geometry. To further explore these mechanisms, we measured the superior sagittal sinus (SSS) cross-sectional area 3 cm above the torcular using T2 images in 20 MS, 10 spontaneous intracranial hypotension (SIH), 21 hydrocephalus and 20 idiopathic intracranial hypertension (IIH) patients and compared with 20 matched controls. The SSS area was reduced by 25% in hydrocephalus (p = 0.0008), increased by 22% (p = 0.037) in SIH and unchanged in IIH compared to matched controls. In MS there was a 16% increase in SSS area (p = 0.01).The findings suggest that changes in SSS cross-sectional are common between MS and SIH patients, while in hydrocephalus and IIH these are different.

Flexible, Penetrating Brain Probes Enabled by Advances in Polymer Microfabrication

The acquisition of high-fidelity, long-term neural recordings in vivo is critically important to advance neuroscience and brain⁻machine interfaces. For decades, rigid materials such as metal microwires and micromachined silicon shanks were used as invasive electrophysiological interfaces to neurons, providing either single or multiple electrode recording sites. Extensive research has revealed that such rigid interfaces suffer from gradual recording quality degradation, in part stemming from tissue damage and the ensuing immune response arising from mechanical mismatch between the probe and brain. The development of "soft" neural probes constructed from polymer shanks has been enabled by advancements in microfabrication; this alternative has the potential to mitigate mismatch-related side effects and thus improve the quality of recordings. This review examines soft neural probe materials and their associated microfabrication techniques, the resulting soft neural probes, and their implementation including custom implantation and electrical packaging strategies. The use of soft materials necessitates careful consideration of surgical placement, often requiring the use of additional surgical shuttles or biodegradable coatings that impart temporary stiffness. Investigation of surgical implantation mechanics and histological evidence to support the use of soft probes will be presented. The review concludes with a critical discussion of the remaining technical challenges and future outlook.

Dynamic mechanical response of brain tissue in indentation in vivo, in situ and in vitro

Characterizing the dynamic mechanical properties of brain tissue is deemed important for developing a comprehensive knowledge of the mechanisms underlying brain injury. The results gathered to date on the tissue properties have been mostly obtained in vitro. Learning how these results might differ quantitatively from those encountered in vivo is a critical step towards the development of biofidelic brain models. The present study provides novel and unique experimental results on, and insights into, brain biorheology in vivo, in situ and in vitro, at large deformations, in the quasi-static and dynamic regimes. The nonlinear dynamic response of the cerebral cortex was measured in indentation on the exposed frontal and parietal lobes of anesthetized porcine subjects. Load-unload cycles were applied to the tissue surface at sinusoidal frequencies of 10, 1, 0.1 and 0.01 Hz. Ramp-relaxation tests were also conducted to assess the tissue viscoelastic behavior at longer times. After euthanasia, the indentation test sequences were repeated in situ on the exposed cortex maintained in its native configuration within the cranium. Mixed gray and white matter samples were subsequently excised from the superior cortex to be subjected to identical indentation test segments in vitro within 6-7 h post mortem. The main response features (e.g. nonlinearities, rate dependencies, hysteresis and conditioning) were measured and contrasted in vivo, in situ and in vitro. The indentation response was found to be significantly stiffer in situ than in vivo. The consistent, quantitative set of mechanical measurements thereby collected provides a preliminary experimental database, which may be used to support the development of constitutive models for the study of mechanically mediated pathways leading to traumatic brain injury.

Characterization of cyclic CSF flow in the foramen magnum and upper cervical spinal canal with MR flow imaging and computational fluid dynamics

CSF flow has been shown to exhibit complex patterns in MR images in both healthy subjects and in patients with Chiari I. Abnormal CSF flow oscillations, according to prevailing opinion, cause syringomyelia and other clinical manifestations that affect some patients with the Chiari I malformation. For this article, we reviewed the literature on PC MR of CSF flow, collected the published CFD studies relevant to CSF flow, and performed flow simulations. PC MR creates cine and still images of CSF flow and measurements of flow velocities. CFD, a technique used to compute flow and pressure in liquid systems, simulates the CSF flow patterns that occur in a specific geometry or anatomy of the SAS and a specific volume of flow. Published PC MR studies show greater peak CSF velocities and more complex flow patterns in patients with Chiari I than in healthy subjects, with synchronous bidirectional flow one of the characteristic markers of pathologic flow. In mathematic models of the SAS created from high-resolution MR images, CFD displays complex CSF flow patterns similar to those shown in PC MR in patients. CFD shows that the pressure and flow patterns vary from level to level in the upper spinal canal and differ between patients with Chiari and healthy volunteers. In models in which elasticity and motion are incorporated, CFD displays CSF pressure waves in the SAS. PC MR and CFD studies to date demonstrate significant alterations of CSF flow and pressure patterns in patients with Chiari I. CSF flow has nonlaminar complex spatial and temporal variations and associated pressure waves and pressure gradients. Additional simulations of CSF flow supplemented by PC MR will lead to better measures for distinguishing pathologic flow abnormalities that cause syringomyelia, headaches, and other clinical manifestations in Chiari I malformations.

Repair of the dura mater with processed collagen devices

BACKGROUND

We evaluated in a canine duraplasty model how specific differences in device physicomechanical properties, porosity, and crosslinking influenced the biological performance of three processed collagen dural substitutes.

METHODS

Three collagen dural substitutes were studied: Dura-Guard, DuraGen, and Durepair. The initial strength, stiffness, and suture retention force were measured using standard mechanical test methods. The relative pore sizes of each device were assessed with a scanning electron microscope. Differential scanning calorimetry was used to measure their respective collagen denaturation temperatures. The biologic response and performance of the materials were evaluated via an acute (1 month) and long-term (3 and 6 months) canine bilateral duraplasty study.

RESULTS

The mechanical properties of Dura-Guard and Durepair were similar to native dura. We could not quantify the mechanical properties of DuraGen because of its fragile nature. The denaturation temperature of DuraGen and Dura-Guard differed significantly from that reported for native collagens. The denaturation temperature of Durepair was comparable with the values reported for native collagens. All three materials were tolerated well by the animals. DuraGen did not maintain its structural integrity beyond 1 month. Dura-Guard and Durepair persisted for 6 months. Durepair was populated by fibroblasts and blood vessels, whereas Dura-Guard was not.

CONCLUSIONS

The three dural substitutes tested were found to be safe and effective in healing surgically created defects in the dura mater. Although each of these dura substitutes are composed of collagen, differences in the collagen source and processing influenced device physicomechanical properties, porosity, and the nativity of the collagen polymer. These measured differences influenced device intraoperative handling and installation as well as the post-operative biological response, where differences in device resorption, cell penetration, vascularization, and collagen remodeling were observed.

Local mechanical anisotropy in human cranial dura mater allografts

Human cranial dura mater (CDM) allograft's success as a repair biomaterial is partly due to its high mechanical strength, which facilitates its ability to form water-tight barriers and resist high in-vivo mechanical loads. Previous studies on CDM allograft mechanical behavior used large test specimens and concluded that the allograft was mechanically isotropic. However, we have quantified CDM microstructure using small angle light scattering (SALS) and found regions of well-aligned fibers displaying structural symmetry between the right and left halves (Jimenez et al., 1998). The high degree of fiber alignment in these regions suggests that they are mechanically anisotropic. However, identification of these regions using SALS requires irreversible tissue dehydration, which may affect mechanical properties. Instead, we utilized CDM structural symmetry to estimate the fiber architecture of one half of the CDM using computer graphics to flip the SALS fiber architecture map of the corresponding half about the plane of symmetry. Test specimens (20 mm x 4 mm) were selected parallel and perpendicular to the preferred fiber directions and subjected to uniaxial mechanical failure testing. CDM allografts were found to be locally anisotropic, having an ultimate tensile strength (UTS) parallel to the fibers of 12.76 +/- 1.65 MPa, and perpendicular to the fibers of 5.21 +/- 1.01 MPa (mean +/- sem). These results indicate that uniaxial mechanical tests on large samples used in previous studies tended to mask the local anisotropic nature of the smaller constituent sections. The testing methods established in this study can be used in the evaluation of new CDM processing methods and post-implant allograft mechanical integrity.

Quantification of the collagen fibre architecture of human cranial dura mater

The purpose of this study was to quantify and map the gross fibre architecture of the cranial dura mater (CDM) using small angle light scattering (SALS). In SALS, HeNe laser light is passed through the tissue, and the resultant scattering pattern is analysed to determine the preferred fibre direction and degree of orientation. The dura mater was found to be a complex structure with fibre orientations ranging from highly aligned to nearly random. In the temporal region, 80% of the samples (n = 20) were found to have regions composed of highly oriented fibres with a mean fibre direction of 6.3 degrees +/- 0.8 degree with respect to the sagittal plane (i.e. almost parallel to the superior sagittal sinus). These highly aligned regions were found in symmetric anatomical locations about the median sagittal sinus and had similar fibre orientations over both hemispheres. Although our sample size was small, we found that the size of the symmetric regions, which covered 14.4 +/- 1.6% of the total CDM area, was not influenced by subject's age or sex. The presence of these highly oriented fibre regions in CDM may be due to mechanical forces exerted on dura mater during its development. These forces may have induced realignment of the collagen fibres in the direction of tensile pull, although the exact basis for the unique gross fibre architecture of CDM remains unknown.

Experimental determination of the force required for insertion of a thermoseed into deep brain tissues

Our laboratories are developing a new technique for delivering localized hyperthermia to deep-seated brain tumors. In this technique, a spherical thermoseed is stereotactically navigated through the brain and tumour tissues via the noncontact application of an external magnetic force. The force required to produce motion of a 3 mm diameter sphere through in vitro brain tissues was measured to be 0.07 +/- 0.03 N. This result was obtained from a series of experiments performed on whole brain specimens extracted from adult canines. Data were also taken with a 3 mm x 3 mm cylinder and a 5 mm sphere. An experimental procedure simulating physiological conditions was developed prior to testing. Evaluations of systematic effects included determinations of the calibration uncertainties, tests of the dependence of the measured force on temperature, and studies of the effects of method of storage of the tissue specimens. The results obtained are compared with (and confirmed by) two different series of experiments performed in vivo on adult canines and with another series of experiments using brain phantom gelatin.

Effect of alternative crosslinking methods on the low strain rate viscoelastic properties of bovine pericardial bioprosthetic material

Early failures of bovine pericardial heart valves have been due to leaflet perforation/tearing and calcification. Since glutaraldehyde fixation has been shown to produce marked changes in leaflet mechanics and has been linked to the development of calcification, alternative crosslinking techniques have been suggested as means to overcome these obstacles. We have examined the low strain rate viscoelastic behavior of bovine pericardium: (1) fresh; (2) chemically treated with glutaraldehyde, cyanimide, or polyglycidyl ether; or (3) physically treated by freeze-drying or heat-drying. Shrinkage temperature tests were conducted to assess intrahelical crosslinking. Polyglycidyl ether and glutaraldehyde both produced substantial crosslinking, with the shrinkage temperature rising above 80 degrees C. Mechanical changes were nearly equivalent, both showing decreased stress relaxation and increased extensibility consistent with intrahelical crosslinking and shrinkage during fixation. Cyanimide, known to crosslink pure collagen materials, showed no evidence of crosslinking intact tissue. Heat-drying, also effective in pure collagen preparations, produced an increase in UTS and tissue modulus, but otherwise left the tissue unchanged. Freeze-drying had no mechanical effect, and therefore provides an attractive means for the storage of connective tissues for later mechanical testing.

The bovine pericardial xenograft: III. Effect of uniaxial and sequential biaxial stress during fixation on the tensile viscoelastic properties of bovine pericardium

Our previous two articles have shown that glutaraldehyde-fixed bovine pericardium is nearly isotropic, whether fixed without constraints, with tethering, or with pressure. In this study, we have used uniaxial stress during fixation to produce bovine pericardial material with marked tensile anisotropy. Rectangular and cruciate pericardial samples have been mechanically examined after one of four treatments: (i) fixation under 88-kPa uniaxial stress, (ii) fixation under 176-kPa uniaxial stress, (iii) 3 h of 176-kPa uniaxial stress in saline followed by 24-h fixation under the same stress, (iv) fixation under 176-kPa uniaxial stress followed by a second fixation under 176-kPa stress in a direction normal to the first. Strips of material were cut at 0 degree, 30 degrees, 60 degrees, and 90 degrees to direction of the initial stress, and tested for response to cyclic loading, stress relaxation, plastic deformation, and fracture properties. Fixation under uniaxial stress produced anistropy similar to that seen in porcine aortic valve leaflets; however, the overall extensibility of the material depended on the applied stress and the aspect ratio of the stressed sample. While loading in saline produced no change, the sequential biaxial stressing produced a reduction in anisotropy, suggesting exposure of additional crosslinking sites. Uniaxial stress during fixation may be a useful method for construction of anisotropic heart valve leaflets.

The bovine pericardial xenograft: I. Effect of fixation in aldehydes without constraint on the tensile viscoelastic properties of bovine pericardium

Tensile testing of tissue strips has been used to examine the effect of simple fixation in glutaraldehyde and formaldehyde on the viscoelastic properties of bovine pericardium. To assess tissue anisotropy, tissue strips were cut at 0 degree, 30 degrees, 60 degrees, and 90 degrees relative to the base-to-apex direction. Fresh anterior pericardium was modestly anisotropic, being least extensible in the base-to-apex direction; however, fixation removed this anisotropy. Fixation also produced a marked change in the response of the material to initial cyclic loading during preconditioning. Overall extensibility of the fixed material was significantly greater than that for the fresh tissue, consistent with a 10.7% shrinkage in aldehydes calculated from strain at fracture data. Reductions in stress relaxation and creep after fixation were noted as well, consistent with intrafibrillar crosslinking. Cyclic hysteresis and ultimate tensile strength were unaffected. Since the observed changes in the stress-strain response were largely attributable to shrinkage, control of shrinkage by physical means would allow for engineering modification of bovine pericardial mechanics for controlled anisotropy.

The bovine pericardial xenograft: II. Effect of tethering or pressurization during fixation on the tensile viscoelastic properties of bovine pericardium

Our previous article suggested that control of the extensibility of aldehyde-fixed pericardium could be achieved by controlling shrinkage during fixation. Therefore, to prevent shrinkage, we have used sandpaper-lined plexiglass plates to clamp circular samples of bovine pericardium during fixation in glutaraldehyde, tethering them at their original dimensions. As well, we have applied transmural pressures of 50 or 100 mm Hg during fixation using a hydraulic column of glutaraldehyde solution. Strips cut at 0 degree, 30 degrees, 60 degrees, and 90 degrees to the base-to-apex cardiac direction have been examined for cyclic stress-strain response, stress relaxation, plastic deformation, and fracture behavior. Under physiological stresses, tethered and pressure-fixed materials were both nearly isotropic. Tethering during fixation produced a material with extensibility nearly identical to that of fresh tissue. Plastic deformation during cyclic loading was reduced below that seen in simple fixation while stress relaxation was unchanged. Pressure-fixation produced reduced extensibility similar to that produced in porcine aortic valve leaflets. Plastic deformation and stress relaxation were both markedly reduced. Pressure-fixation reduced the strain at fracture, but fracture behavior was otherwise unaffected. Tethering and pressure-fixation offer attractive means to control the mechanical behavior of bovine xenograft materials.