Development of a conductivity-based immunosensor for sensitive detection of methamphetamine (stimulant drug) in human urine

Enzyme-free colorimetric sensor based on molecularly imprinted polymer and ninhydrin for methamphetamine detection

Digital image colorimetry was applied to introduce a rapid, portable, and non-enzymatic test for methamphetamine measurements in urine. Imprinted polymer was synthesized in a simple, low-cost process and utilized for selective extraction of analyte from the sample in combination with the well-known ninhydrin color test. Applying the digital camera on a mobile phone, RGB basic color data were obtained, and calibration curves were developed for different concentrations of methamphetamine. Optimization of the test condition was carried out by changing some effective parameters such as extraction time and pH. The results were compared with some similar structural compounds indicating great potential for use as a selective and semi-quantitative field test for this drug. An acceptable linear range (5-100 μM) and detection limit (1.44 μM) as well as good agreement with the reference method, makes this fast portable method, an easy and reliable test for the analysis of methamphetamine in biological samples.

Molecularly imprinted polymer containing fluorescent graphene quantum dots as a new fluorescent nanosensor for detection of methamphetamine

A novel fluorescent nanosensor based on graphene quantum dots embedded within molecularly imprinted polymer (GQDs@MIP) was developed for detection and determination of methamphetamine (METH). The resulting GQDs@MIP nanocomposite exhibited higher methamphetamine selectivity in comparison with corresponding non-imprinted polymer (GQDs@NIP). Characterization of the GQDs@MIP nanocomposite was done by nitrogen adsorption and desorption analysis (BET method), transmission electron microscopy (TEM), photoluminescence (PL), ultraviolet-visible (UV-Vis), and Fourier transform infrared (FT-IR) spectroscopies. The fluorescence intensity of GQDs@MIP was efficiently quenched in the presence of methamphetamine template molecules while no quenching was observed in the presence of other analytes such as amphetamine, ibuprofen, codeine, and morphine. Using this method, the detection limit of 1.7 μg/L was obtained for methamphetamine determination.

Nanomaterials for Electrochemical Immunosensing

Electrochemical immunosensors resulting from a combination of the traditional immunoassay approach with modern biosensors and electrochemical analysis constitute a current research hotspot. They exhibit both the high selectivity characteristics of immunoassays and the high sensitivity of electrochemical analysis, along with other merits such as small volume, convenience, low cost, simple preparation, and real-time on-line detection, and have been widely used in the fields of environmental monitoring, medical clinical trials and food analysis. Notably, the rapid development of nanotechnology and the wide application of nanomaterials have provided new opportunities for the development of high-performance electrochemical immunosensors. Various nanomaterials with different properties can effectively solve issues such as the immobilization of biological recognition molecules, enrichment and concentration of trace analytes, and signal detection and amplification to further enhance the stability and sensitivity of the electrochemical immunoassay procedure. This review introduces the working principles and development of electrochemical immunosensors based on different signals, along with new achievements and progress related to electrochemical immunosensors in various fields. The importance of various types of nanomaterials for improving the performance of electrochemical immunosensor is also reviewed to provide a theoretical basis and guidance for the further development and application of nanomaterials in electrochemical immunosensors.

Enantioselective piezoelectric quartz crystal sensor for d-methamphetamine based on a molecularly imprinted polymer

A piezoelectric quartz crystal (PQC) sensor based on a molecularly imprinted polymer (MIP) has been developed for enantioselective and quantitative analysis of d-(+)-methamphetamine (d(+)-MA). The sensor was produced by bulk polymerization and the resulting MIP was then coated on the gold electrode of an AT-cut quartz crystal. Conditions such as volume of polymer coating, curing time, type of PQC, baseline solvent, pH, and buffer type were found to affect the sensor response and were therefore optimized. The PQC-MIP gave a stable response to different concentrations of d(+)-MA standard solutions (response time = 10 to 100 s) with good repeatability (RSD = 0.03 to 3.09%; n = 3), good reproducibility (RSD = 3.55%; n = 5), and good reversibility (RSD = 0.36%; n = 3). The linear range of the sensor covered five orders of magnitude of analyte concentration, ranging from 10(-5) to 10(-1) microg mL(-1), and the limit of detection was calculated as 11.9 pg d(+)-MA mL(-1) . The sensor had a highly enantioselective response to d(+)-MA compared with its response to l(-)-MA, racemic MA, and phentermine. The developed sensor was validated by applying it to human urine samples from drug-free individuals spiked with standard d(+)-MA and from a confirmed MA user. Use of the standard addition method (SAM) and samples spiked with d(+)-MA at levels ranging from 1 x 10(-3) to 1 x 10(-2) microg mL(-1) showed recovery was good (95.3 to 110.9%).

Electrochemical biosensors

Electrochemical biosensors combine the sensitivity of electroanalytical methods with the inherent bioselectivity of the biological component. The biological component in the sensor recognizes its analyte resulting in a catalytic or binding event that ultimately produces an electrical signal monitored by a transducer that is proportional to analyte concentration. Some of these sensor devices have reached the commercial stage and are routinely used in clinical, environmental, industrial, and agricultural applications. The two classes of electrochemical biosensors, biocatalytic devices and affinity sensors, will be discussed in this critical review to provide an accessible introduction to electrochemical biosensors for any scientist (110 references).

A reusable capacitive immunosensor for detection of Salmonella spp. based on grafted ethylene diamine and self-assembled gold nanoparticle monolayers

Fabrication of a novel capacitive immunosensor based on grafted ethylene diamine and self-assembled gold nanoparticle monolayer on glassy carbon electrode for the detection of Salmonella spp. is described for the first time. In the present study, the Salmonella spp. monoclonal antibodies (denoted as McAbs) was immobilized on gold nanoparticles. Interaction of McAbs and Salmonella spp. was detected directly using the electrochemical impedance spectroscopy (EIS) technique. The experimental results showed that the concentration of antigen was measured through the relative change in capacitance in the corresponding specific binding of Salmonella spp. and McAbs. Under the optimized conditions, the relative changes in capacitance were proportional to the logarithmic values of Salmonella spp. concentrations in the range of 1.0 x 10(2) to 1.0 x 10(5) CFU mL(-1) (r = 0.991) with the detection limit of 1.0 x 10(2) CFU mL(-1). The stability of proposed immunosensor could be estimated by determining the relative change in capacitance, which remained almost the same in two months and decreased gradually to 85.3% of initial value after four months' storage. The used immunosensor could be regenerated repeatedly by immersing in glycine-HCl buffer solution (pH 2.8). Finally, the proposed immunosensor was successfully used for the detection of Salmonella spp. in lab-processed commercial pork samples.

Electrochemical Biosensors - Sensor Principles and Architectures

Quantification of biological or biochemical processes are of utmost importance for medical, biological and biotechnological applications. However, converting the biological information to an easily processed electronic signal is challenging due to the complexity of connecting an electronic device directly to a biological environment. Electrochemical biosensors provide an attractive means to analyze the content of a biological sample due to the direct conversion of a biological event to an electronic signal. Over the past decades several sensing concepts and related devices have been developed. In this review, the most common traditional techniques, such as cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, and various field-effect transistor based methods are presented along with selected promising novel approaches, such as nanowire or magnetic nanoparticle-based biosensing. Additional measurement techniques, which have been shown useful in combination with electrochemical detection, are also summarized, such as the electrochemical versions of surface plasmon resonance, optical waveguide lightmode spectroscopy, ellipsometry, quartz crystal microbalance, and scanning probe microscopy. The signal transduction and the general performance of electrochemical sensors are often determined by the surface architectures that connect the sensing element to the biological sample at the nanometer scale. The most common surface modification techniques, the various electrochemical transduction mechanisms, and the choice of the recognition receptor molecules all influence the ultimate sensitivity of the sensor. New nanotechnology-based approaches, such as the use of engineered ion-channels in lipid bilayers, the encapsulation of enzymes into vesicles, polymersomes, or polyelectrolyte capsules provide additional possibilities for signal amplification. In particular, this review highlights the importance of the precise control over the delicate interplay between surface nano-architectures, surface functionalization and the chosen sensor transducer principle, as well as the usefulness of complementary characterization tools to interpret and to optimize the sensor response.

Aspects of recent development of immunosensors

This chapter focuses on the recent developments in the field of immunosensors. Immunosensors incorporate the specific immunochemical reaction with the modern transducers including electrochemical (potentiometric, conductometric, capacitative, impedance, amperometric), optical (fluorescence, luminescence, refractive index), and microgravimetric transducers. These immunosensor devices with dramatic improvements in the sensitivity and selectivity possess the abilities to investigate the reaction dynamics of antibody–antigen binding and the potential to revolutionize conventional immunoassay techniques. With the rapid development of immunological reagents and detection equipments, immunosensors have allowed an increasing range of analytes to be identified and quantified and in particular, simple-to-use, inexpensive, and reliable immunosensing systems have been developed for areas such as outpatient monitoring, large screening programs, and remote environmental surveillance. Immunosensors with lowered detection limits and increased sensitivities have been developed in various fields, particularly in clinical analysis. A noticeable development trend is also observed in the development of immunosensors combining with other techniques such as flow injection analysis (FIA) or capillary electrophoretic (CE) analysis, which complement and improve the present immunoassay methods. Belov et al. have proposed a novel immunophenotyping method for leukemias which uses a cluster of differentiation antibody microarray, and a microarray of enzyme-linked immunosorbent assay has been developed for autoimmune diagnosis of systematic rheumatic disease. Development of microfluidic immunosensor systems for proteomics and drug discovery have also been reported in recent years where the microfluidic system integrates multiple processes in a single device to improve analytical performance by reducing the reagent consumption and the analysis time, and increasing reliability and sensitivity through automation.

Capacitive biosensor for detection of endotoxin

A capacitive biosensor for the detection of bacterial endotoxin has been developed. Endotoxin-neutralizing protein derived from American horseshoe crab was immobilized to a self-assembled thiol layer on a biosensor transducer (Au). Upon injection of a sample containing endotoxin, a decrease in the observed capacitive signal was registered. Endotoxin could be determined under optimum conditions with a detection limit of 1.0 x 10(-13) M and linearity ranging from 1.0 x 10(-13) to 1.0 x 10(-10) M. Good agreement was achieved when applying endotoxin preparations purified from an Escherichia coli cultivation to the capacitive biosensor system, utilizing the conventional method for quantitative endotoxin determination, the Limulus amebocyte lysate test as a reference. The capacitive biosensor method was statistically tested with the Wilcoxon signed rank test, which proved the system is acceptable for the quantitative analysis of bacterial endotoxin (P<0.05).

A comparative study of capacitive immunosensors based on self-assembled monolayers formed from thiourea, thioctic acid, and 3-mercaptopropionic acid

A procedure was developed for the covalent coupling of anti-alpha-fetoprotein antibody (anti-AFP) to a gold surface modified with a self-assembled monolayer (SAM) of thiourea (TU). The performance of the SAM-antibody layer was compared to those of similar layers based on thioctic acid (TA) and 3-mercaptopropionic acid (MPA) by using flow injection capacitive immunosensor system. Covalent coupling of anti-AFP on self-assembled thiourea monolayer (SATUM) modified gold electrode can be used to detect alpha-fetoprotein with high efficiency, similar sensitivity, the same linear range (0.01-10 microgl(-1)) and detection limit (10 ngl(-1)) as those obtained from sensors based on self-assembled thioctic acid monolayer (SATAM) and self-assembled 3-mercaptopropionic acid monolayer (SAMPAM). The system is specific for alpha-fetoprotein and can be regenerated and reused up to 48 times. Therefore, self-assembled monolayer using thiourea which is cheaper than thioctic acid and 3-mercaptopropionic acid is a good alternative for biosensor applications when SAMs are used.

Electrochemical biosensors for environmental monitoring

Highly sensitive electrochemical biosensors offer precision, sensitivity, rapidity, and ease of operation for on-site environmental analysis. An electrochemical biosensor is an analytical device in which a specific biological recognition element (bioreceptor) is integrated within or intimately associated with an electrode (transducer) that converts the recognition event to a measurable electrical signal for the purpose of detecting a target compound (analyte) in solution. The signal generated allows both qualitative and quantitative measurements of an analyte in real time. In most cases, a miniaturized electrochemical cell contains a low volume of analyte, which is vital when dealing with hazardous materials and makes such devices ideal for environmental monitoring. This approach not only provides the means for on-site analysis but also removes the time delay and sample alteration that can occur during transport to a centralized laboratory. We first address the basic principles of electroanalytical measurement and the merger of electrochemistry and biology into a biosensing system, and then we discuss various environmental monitoring strategies involving this technology.

Immunosensors--principles and applications to clinical chemistry

INTRODUCTION

Immunosensors are affinity ligand-based biosensor solid-state devices in which the immunochemical reaction is coupled to a transducer. The fundamental basis of all immunosensors is the specificity of the molecular recognition of antigens by antibodies to form a stable complex. This is similar to the immunoassay methodology. Immunosensors can be categorized based on the detection principle applied. The main developments are electrochemical, optical, and microgravimetric immunosensors. In contrast to immunoassay, modern transducer technology enables the label-free detection and quantification of the immune complex.

METHODS

The analysis of trace substances in environmental science, pharmaceutical and food industries is a challenge since many of these applications demand a continuous monitoring mode. The use of immunosensors in these applications is most appropriate. Similarly, a series of clinical problems may be solved by continuous monitoring of certain analytes.

CONCLUSIONS

Clinical chemists should take advantage of immunosensors in clinical diagnostics. There are many recent developments in the immunosensor field which have potential impacts. The future role of this technique in intralaboratory, as well as bedside testing, will become even more important as the clinical laboratory is faced with increasing pressure to contain costs.