Electrochemical immunoassay using magnetic beads for the determination of zearalenone in baby food: An anticipated analytical tool for food safety

Rapid, convenient, and highly sensitive detection of human hemoglobin in serum using a high-affinity bivalent antibody-enzyme complex

Human hemoglobin (Hb) is a biomarker of several diseases, and monitoring of Hb levels is required during emergent surgery. However, rapid and sensitive Hb detection methods are yet to be developed. The present study established a rapid, convenient, and highly sensitive detection method for Hb in human serum using a bivalent antibody-enzyme complex (AEC). AECs are promising sensing elements because of their ability to bind specific targets and their catalytic activity that produce signals. We recently reported a convenient and universal method to fabricate bivalent AECs with two antibody fragments, using the SpyCatcher/SpyTag system. The present study applied a bivalent AEC for highly sensitive and quantitative detection of human Hb. The bivalent anti-Hb AEC was successfully prepared by incubating both N- and C-terminus SpyCatcher-fused glucose dehydrogenase and SpyTag-fused anti-Hb single-chain variable fragments at 4 °C. As expected, the bivalent AEC for Hb with a multimeric structure showed higher affinity than the monovalent AEC, by means of avidity effects, unlike that for soluble epidermal growth factor receptor with a monomeric structure; this contributed to a great improvement in sensitivity. Finally, we established a rapid and wash-free homogeneous electrochemical detection system for Hb by integrating magnetic beads. The linear range of the system completely covered the clinically required Hb levels, even in human serum. This technology provides an ideal point-of-care test for Hb and other multimeric biomarkers.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.

Indirect competitive enzyme-linked immunosorbent assay based on a broad-spectrum monoclonal antibody for tropane alkaloids detection in pig urine, pork and cereal flours

In this study, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a broad-spectrum monoclonal antibody for tropane alkaloids (TAs) was established for the rapid screening of atropine, scopolamine, homatropine, apoatropine, anisodamine, anisodine and L-hyoscyamine residues in pig urine, pork and cereal flour samples through a simple sample preparation procedure. The half inhibitory concentrations of atropine, homatropine, L-hyoscyamine, apoatropine, scopolamine, anisodamine and anisodine were 0.05, 0.07, 0.14, 0.14, 0.24, 5.30 and 10.15 ng mL-1, respectivelyThe detection and quantitative limits of this method for TAs in samples were 0.18-73.18 and 0.44-74.77 μg kg-1. The spiked recoveries ranged from 69.88% to 147.93%, and the coefficient of variations were less than 14%. Good correlation (R2 = 0.9929) between the results of the ic-ELISA and the high performance liquid chromatography-tandem mass spectrometry support the reliability of the developed ic-ELISA method.

Trimer-based aptasensor for simultaneous determination of multiple mycotoxins using SERS and fluorimetry

An aptasensor is reported for the detection of three different kinds of mycotoxins, i.e., zearalenone (ZEN), ochratoxin A (OTA), and fumonisin B1 (FB1). Based on fluorescence resonance energy transfer effect (FRET) and surface-enhanced Raman scattering (SERS), the levels of ZEN, FB1, and OTA can be simultaneously determined. Under 980-nm and 650-nm laser excitation, the logarithmic values of fluorescence signal intensities at 543 nm and 670 nm are slowly increased as the concentrations of ZEN and OTA vary from 0.1 ng mL^-1 and 0.05 ng mL^-1 to 100 ng mL^-1 and 25 ng mL^-1, respectively. For FB1, under 980-nm laser excitation, the logarithmic value of SERS signal intensity at 1567 cm^-1 gradually increases with the concentration of FB1 in the range 0.05-200 pg mL^-1 (R² = 0.996). The detection limits of the proposed assay for ZEN, OTA, and FB1 are 0.03 ng mL^-1, 0.01 ng mL^-1, and 0.02 pg mL^-1, respectively. The selectivity experiment results indicate this assay possesses a high selectivity over other commonly encountered mycotoxins. The average recoveries range from 90 to 107%, revealing satisfactory application potential of the proposed assay. The developed aptasensor will bring bright prospects for research in the field of multiplexed mycotoxine detection. Graphical Abstract Schematic representation of an aptamer-based assay for multiple mycotoxins determination.

Detection Strategies of Zearalenone for Food Safety: A Review

Zearalenone (ZEN) is a toxic compound produced by the metabolism of fungi (genus Fusarium) that threaten the food and agricultural industry belonging to the in foods and feeds. ZEN has toxic effects on human and animal health due to its mutagenicity, teratogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. To ensure food safety, rapid, precise, and reliable analytical methods can be developed for the detection of toxins such as ZEN. Different selective molecular diagnostic elements are used in conjunction with different detection strategies to achieve this goal. In this review, the use of electrochemical, colorimetric, fluorometric, refractometric as well as other strategies were discussed for ZEN detection. The success of the sensors in analytical performance depends on the development of receptors with increased affinity to the target. This requirement has been met with different immunoassays, aptamer-assays, and molecular imprinting techniques. The immobilization techniques and analysis strategies developed with the combination of nanomaterials provided high precision, reliability, and convenience in ZEN detection, in which electrochemical strategies perform the best.

Zwitterionic Polydopamine/Protein G Coating for Antibody Immobilization: Toward Suppression of Nonspecific Binding in Immunoassays

For the development of immunoassays into sophisticated analyte-sensing methods, it is a priority to suppress nonspecific binding in immunoassays. Herein, we report a one-step surface coating method that can not only optimally immobilize antibodies but also suppress nonspecific binding. Zwitterionic dopamine (ZW-DOPA) exhibits distinct antifouling performance, and protein G enables an antibody to have an optimal orientation. A mixture of ZW-DOPA and protein G can be simply coated onto various kinds of surfaces, and the antibody can be immobilized onto the ZW-DOPA/protein G-coated surfaces. The antifouling property of the zwitterionic group, surface-independent coating property of the catechol and amine groups, and antibody-retaining property of protein G synergistically contribute to surface-independent and oriented immobilization of antibodies without nonspecific binding. The surface characteristics of ZW-DOPA/protein G-coated substrates were analyzed by X-ray photoelectron spectroscopy, contact angle goniometry, atomic force microscopy, and ellipsometry. Importantly, the ZW-DOPA/protein G-coated substrates showed high resistance to nonspecific protein adhesion. We also verified that antibodies could be immobilized onto ZW-DOPA/protein G-coated substrates using fluorescence and biolayer interferometry systems. Finally, ZW-DOPA/protein G-coated substrates were employed as immune substrates for influenza virus detection via the naked eye and surface-enhanced Raman scattering, allowing us to efficiently identify the virus. It is anticipated that the developed ZW-DOPA/protein G coating method will be useful for the advancement of immunoassays.

A fluorometric method for aptamer-based simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B1 making use of gold nanorods and upconversion nanoparticles

An aptamer-based assay for the determination of two different kinds of fusarium mycotoxins, i.e., zearalenone (ZEN) and fumonisin B₁ (FB₁), is presented. Based on the inner filter effect (IFE) strategy, the contents of ZEN and FB₁ can be simultaneously quantified. It is making use of 65-nm gold nanorods (AuNRs), 20-nm upconversion nanoparticles (UCNPs), fluorescence dyes, and DNA sequences. In the absence of ZEN and FB₁, the UCNPs and AuNRs associate through DNA sequences. Due to IFE effect, weak fluorescence signals are collected. In the presence of ZEN or FB₁, UCNPs and AuNRs become unstable and partially separate from each other. This results in the recovery of fluorescence signals. Under 980-nm laser excitation, the logarithmic values of fluorescence signal intensities at 606 nm and 753 nm gradually increase with the concentration of ZEN and FB₁ in the ranges 0.05-100 μg L^-1 (the coefficient of determination is 0.997) and 0.01-100 ng L^-1 (the coefficient of determination is 0.986), respectively. The limits of detection (LOD) of the fabricated assay for ZEN and FB1 are 0.01 μg L^-1 and 0.003 ng L^-1, respectively. The proposed method has a high selectivity over other competitive mycotoxins, including aflatoxin B1, ochratoxin A, patulin and ochratoxin B. The applicability of the assay was evaluated in the determination of ZEN and FB1 contents in spiked corn samples. The average recoveries ranged from 89.9 to 106.6%. This result confirms the practicality of this method. Graphical abstract Schematic representation of an aptamer-based fluorometric method for simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B₁.

Detection of zearalenone in an aptamer assay using attenuated internal reflection ellipsometry and it's cereal sample applications

Mycotoxins are toxic compounds produced by the metabolism of certain fungi that threaten the food and agricultural industry. Over hundreds of mycotoxins, one of the most common toxins, zearalenone (ZEN), has toxic effects on human and animal health due to its mutagenicity, treatogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. In this work, attenuated internal reflection spectroscopic ellipsometry (AIR-SE) combined with the signal amplification via surface plasmon resonance conditions that were proved to be a highly sensitive analytical tool in bio-sensing was developed for the sensitive and selective ZEN detection in cereal products such as corn, wheat, rice, and oat. Combined with the oligonucleotide aptamer for ZEN recognition, our proposed method showed good performance with yielding 0.08 ng/mL LOD and 0.01-1000 ng/mL detection range. A mini-review was also introduced in, to compare various methods for ZEN detection.

Fabrication of pioneering 3D sakura-shaped metal-organic coordination polymers Cu@L-Glu phenomenal for signal amplification in highly sensitive detection of zearalenone

Low molecular weight pollutants from foods have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in foods. In this study, a brand-new type of nano metal-organic coordination polymers (MOCPs) nanocarriers (3D sakura-shaped copper (II) ions@L-glutamic acid (L-Glu)) has been first synthesized. We herein demonstrate a facile chelated method that allows the combination of copper (II) ions and L-Glu. A series of controlled experiments have revealed that the reaction time and the ratio of reactants played the crucial roles in affecting the morphology of the final product. 3D sakura-shaped Cu@L-Glu combined with palladium-platinum nanoparticle (Pd-PtNPs) to obtain Cu@L-Glu/Pd-PtNPs acting as the signal tag, which applied in electrochemical aptasensor for ultrasensitive detection of zearalenone (ZEN). A glassy carbon electrode was first modified with spherical Au-PANI-Au nanohybrids to enhance the conductivity and immobilize more amino modified ZEN aptamer. Cu@L-Glu/Pd-PtNPs were labeled with Complementary DNA (partial matching with ZEN aptamer) to form bioconjugates for signal amplification. After the hybridization reaction of ZEN aptamer and the bioconjugates, a significant electrochemical signal from the catalysis of H₂O₂ by Cu@L-Glu/Pd-PtNPs can be observed. ZEN competed with bioconjugates for binding to ZEN aptamer, resulting in decreased the electrochemical signal. Chronoamperometry was applied to record the final electrochemical signals. Under optimal conditions, the electrochemical aptasensor exhibited desirable sensitive detection of ZEN with a wide linearity ranging from 1 fg/mL to 100 ng/mL and a relatively low detection limit of 0.45 fg/mL (S/N = 3). Furthermore, the proposed electrochemical aptasensor shows excellent selectivity to the ZEN in the presence of possible interfering substances, and has potential application for ZEN detection in food samples.

Advances in Biosensors, Chemosensors and Assays for the Determination of Fusarium Mycotoxins

The contaminations of Fusarium mycotoxins in grains and related products, and the exposure in human body are considerable concerns in food safety and human health worldwide. The common Fusarium mycotoxins include fumonisins, T-2 toxin, deoxynivalenol and zearalenone. For this reason, simple, fast and sensitive analytical techniques are particularly important for the screening and determination of Fusarium mycotoxins. In this review, we outlined the related advances in biosensors, chemosensors and assays based on the classical and novel recognition elements such as antibodies, aptamers and molecularly imprinted polymers. Application to food/feed commodities, limit and time of detection were also discussed.

New advances in electrochemical biosensors for the detection of toxins: Nanomaterials, magnetic beads and microfluidics systems. A review

The use of nanotechnology in bioanalytical devices has special advantages in the detection of toxins of interest in food safety and environmental applications. The low levels to be detected and the small size of toxins justify the increasing number of publications dealing with electrochemical biosensors, due to their high sensitivity and design versatility. The incorporation of nanomaterials in their development has been exploited to further increase their sensitivity, providing simple and fast devices, with multiplexed capabilities. This paper gives an overview of the electrochemical biosensors that have incorporated carbon and metal nanomaterials in their configurations for the detection of toxins. Biosensing systems based on magnetic beads or integrated into microfluidics systems have also been considered because of their contribution to the development of compact analytical devices. The roles of these materials, the methods used for their incorporation in the biosensor configurations as well as the advantages they provide to the analyses are summarised.

Screening of single-stranded DNA (ssDNA) aptamers against a zearalenone monoclonal antibody and development of a ssDNA-based enzyme-linked oligonucleotide assay for determination of zearalenone in corn

A hypotoxic immunosorbent assay for the detection of zearalenone (ZEN) was developed, by identifying a single-stranded DNA (ssDNA) aptamer with high specificity and affinity for a ZEN monoclonal antibody (mAb-ZEN). ssDNA aptamers, which could mimic ZEN epitopes, were identified using the modified systematic evolution of ligands by an exponential enrichment (SELEX) technique. The purified mAb-ZEN was coated on microtiter plates as a target recognized by the random oligonucleotide ssDNA library. The binding affinity between the aptamers and mAb-ZEN during each round was measured by the biotin–streptavidin–horseradish peroxidase system. During 15 rounds of screening, an increasing binding affinity was observed. The enriched ssDNA library binding to mAb-ZEN with high affinity was cloned, sequenced, and analyzed. One aptamer (number 46), which displays the highest affinity and specificity for the mAb-ZEN, was used to establish an indirect competition enzyme-linked oligonucleotide assay (ELONA) to measure the ZEN concentration in corn. Under optimal conditions, the regression equation for quantification of ZEN was y = −0.0778x + 0.713 (R2 = 0.9981). The detection limit and IC50 were 0.01 and 0.2 ng/mL, respectively, with a working range of 0.03–2.5 ng/mL. The recovery rates of the spiked samples in the ELONA ranged from 95 to 105%. Aptamers, which can mimic many types of low-weight analytes in agricultural products, could serve as surrogates for the development of hypotoxic, environmentally friendly immunological detection methods.

Fast and sensitive detection of mycotoxins in wheat using microfluidics based Real-time Electrochemical Profiling

The objective of the study has been the development of a new sensing platform, called Real-time Electrochemical Profiling (REP) that relies on real-time electrochemical immunoassay detection. The proposed REP platform consists of new electrode arrays that are easy to fabricate, has a small imprint allowing microfluidic system integration, enables multiplexed amperometric measurements and performs well in terms of electrochemical immunoassay detection as shown through the deoxynivalenol detection assays. The deoxynivalenol detection has been conducted according to an optimised REP assay protocol using deoxynivalenol standards at varying concentrations and a standard curve was obtained (y=-20.33ln(x)+124.06; R(2)=0.97) with a limit of detection of 6.25 ng/ml. As both ELISA and REP detection methods use horse radish peroxidase as the label and 3.3',5.5'-Tetramethylbenzidine as the substrate, the performance of the REP platform as an ELISA reader has also been investigated and a perfect correlation between the deoxynivalenol concentration and the current response was obtained (y=-14.56ln(x)+101.02; R(2)=0.99). The calibration curves of both assays have been compared to conventional ELISA tests for confirmation. After assay optimisation using toxin spiked buffer, the deoxynivalenol detection assay has also been performed to detect toxins in wheat grain.

Electrochemical affinity biosensors for detection of mycotoxins: A review

This review discusses the current state of electrochemical biosensors in the determination of mycotoxins in foods. Mycotoxins are highly toxic secondary metabolites produced by molds. The acute toxicity of these results in serious human and animal health problems, although it has been only since early 1960s when the first studied aflatoxins were found to be carcinogenic. Mycotoxins affect a broad range of agricultural products, most important cereals and cereal-based foods. A majority of countries, mentioning especially the European Union, have established preventive programs to control contamination and strict laws of the permitted levels in foods. Official methods of analysis of mycotoxins normally requires sophisticated instrumentation, e.g. liquid chromatography with fluorescence or mass detectors, combined with extraction procedures for sample preparation. For about sixteen years, the use of simpler and faster analytical procedures based on affinity biosensors has emerged in scientific literature as a very promising alternative, particularly electrochemical (i.e., amperometric, impedance, potentiometric or conductimetric) affinity biosensors due to their simplicity and sensitivity. Typically, electrochemical biosensors for mycotoxins use specific antibodies or aptamers as affinity ligands, although recombinant antibodies, artificial receptors and molecular imprinted polymers show potential utility. This article deals with recent advances in electrochemical affinity biosensors for mycotoxins and covers complete literature from the first reports about sixteen years ago.

Novel chemiluminescence immunoassay for the determination of zearalenone in food samples using gold nanoparticles labeled with streptavidin-horseradish peroxidase

A novel highly sensitive chemiluminescence immunoassay (CLIA) was developed to detect zearalenone in food samples by using both biotinylated zearalenone conjugates and gold (Au) nanoparticles labeled with streptavidin-horseradish peroxidase for signal amplification. Biotinylated zearalenone-ovalbumin conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase were synthesized separately. The concentrations of immunoreagents and the reaction times of these immunoreagents were optimized to improve the performances of analytical methods. For the CLIA based on biotinylated zearalenone conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase, the limit of detection was 0.008 ng/mL and the IC50 was 0.11 ng/mL. The linear working range was 0.02-0.51 ng/mL. The cross-reactivities with the zearalenone analogues (α-zearalanol, zearalanone, α-zearalenol, β-zearalanol, and β-zearalenol) were 32, 17, 12, 0.3, and 0.1%, respectively. The recovery rates in spiked food samples were 97-117%, and the intraday and interday relative standard deviations were both <10%. Parallel analysis of natural food samples showed a good correlation between this novel CLIA and liquid chromatography-tandem mass spectrometry. This method provides a rapid, accurate, and highly sensitive method to determine levels of zearalenone in food samples.

Magnetic particle-based enzyme assays and immunoassays for microcystins: from colorimetric to electrochemical detection

In this work, magnetic particles (MPs) are used as supports for the immobilization of biorecognition molecules for the detection of microcystins (MCs). In one approach, a recombinant protein phosphatase 1 (PP1) has been conjugated to MPs via coordination chemistry, and MC-LR detection has been based on the inhibition of the enzyme activity. In the other approach, a monoclonal antibody (mAb) against MC-LR has been conjugated to protein G-coated MPs, and a direct competitive enzyme-linked immunoparticle assay (ELIPA) has been then performed. Conjugation of biomolecules to MPs has been first checked, and after optimization, MC detection has been performed. The colorimetric PPIA with PP1-MP and the best ELIPA strategy have provided limits of detection (LOD) of 7.4 and 3.9 μg/L of MC-LR, respectively. The electrochemical ELIPA has decreased the LOD to 0.4 μg/L, value below the guideline recommended by the World Health Organisation (WHO). The approaches have been applied to the analysis of a cyanobacterial culture and a natural bloom, and MC equivalent contents have been compared to those obtained by conventional assays and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Results have demonstrated the viability of the use of MPs as biomolecule immobilization supports in biotechnological tools for MCs monitoring.

Electrochemical Sandwich Immunoassay for the Ultrasensitive Detection of Human MUC1 Cancer Biomarker

A new electrochemical sandwich immunoassay for the ultrasensitive detection of human MUC1 cancer biomarker using protein G-functionalized magnetic beads (MBs) and graphite-based screen-printed electrodes (SPEs) was developed. Magnetic beads were employed as the platforms for the immobilization and immunoreaction process. A pair of primary and secondary antibodies was used to capture the MUC1 protein. After labeling with a third antibody conjugated with horseradish peroxidase (HRP), the resulting conjugate was trapped at the surface of the graphite-based SPEs and MUC1 determination was carried out by differential pulse voltammetry (DPV) at 0.4 V upon H2O2addition using acetaminophen (APAP) as the redox mediator. A linear relationship was obtained for the detection of human MUC1 over a range of 0–25 ppb with the lowest detection limit of 1.34 ppb when HRP was applied as a label. Preliminary experiments were performed using disposable electrochemical sensors in order to optimize some parameters (i.e., incubation times, concentrations, and blocking agent).

Multiplexed fluorescence resonance energy transfer aptasensor between upconversion nanoparticles and graphene oxide for the simultaneous determination of mycotoxins

We presented a new aptasensor for mycotoxins, which was based on multiplexed fluorescence resonance energy transfer (FRET) between multicolor upconversion fluorescent nanoparticles (UCNPs) as donors and graphene oxide (GO) as the entire and effective acceptor. BaY(0.78)F(5):Yb(0.2), Er(0.02) and BaY(0.78)F(5):Yb(0.7), Tm(0.02) upconversion nanoparticles were synthesized and functionalized, respectively, with immobilized ochratoxin A (OTA)-aptamers and fumonisin B(1) (FB(1))-aptamers. On the basis of the strong π-π stacking effect between the nucleobases of the aptamers and the sp(2) atoms of GO, the aptamer modified-UCNPs can be brought in close proximity to the GO surface. The strong upconversion fluorescence both of BaY(0.78)F(5):Yb(0.2), Er(0.02) and BaY(0.78)F(5):Yb(0.2), Tm(0.02) can be completely quenched by the GO, because of a good overlap between the fluorescence emission of multicolor UCNPs and the absorption spectrum of GO. In contrast, in the presence of OTA and FB(1), the aptamers preferred to bind to their corresponding mycotoxins, which led to changes in the formation of aptamers, and therefore, aptamer modified-UCNPs were far away from the GO surface. Our study results showed that the fluorescence intensity of BaYF(5):Yb Er and BaYF(5):Yb Tm were related to the concentration of OTA and FB(1). We therefore developed a sensitive and simple platform for the simultaneous detection of OTA and FB(1) with multicolor UCNPs and GO as the FRET pair. The aptasensor provided a linear range from 0.05 to 100 ng·mL(-1) for OTA and 0.1 to 500 ng·mL(-1) for FB(1); the detection limit of OTA was 0.02 ng·mL(-1) and FB(1) was 0.1 ng·mL(-1). As a practical application, the aptasensor was used to monitor OTA and FB(1) level in naturally contaminated maize samples with the results consistent with that of a classic ELISA method. More importantly, the novel multiplexed FRET was established for the first time based on multiplexed energy donors to the entire energy acceptor; this work was expected to open up a new field of FRET system applications for various targets.

Development of an electrochemical immunoassay for detection of gatifloxacin in swine urine

To detect gatifloxacin (GAT) residue in swine urine, an electrochemical immunoassay was established. An indirect competitive immunoassay was developed, in which the coating antigen is immobilized in an enzyme-linked immunosorbent assay (ELISA) plate and GAT residue from the sample competes with the limited binding sites in added anti-GAT antibody. Horseradish peroxidase (HRP) conjugated to goat anti-rabbit IgG was used as the enzymatic label. A carbon fiber working electrode was constructed and current signals were detected by using hydrogen peroxide as a substrate and hydroquinone as an electrochemical mediator. The electrochemical immunoassay was evaluated by analysis of GAT in buffer or swine urine and an average value of half inhibition concentration (IC(50)) of 8.9 ng/ml was obtained. Excellent specificity of the antibody was achieved with little cross-reaction with lomefloxacin (3.0%), ciprofloxacin (3.0%), and ofloxacin (1.9%) among commonly used (fluoro)quinolones. In conclusion, the immunoassay system developed in this research can be used as a rapid, powerful and on-site analytical tool to detect GAT residue in foods and food products.

Development of a novel label-free amperometric immunosensor for the detection of okadaic acid

Okadaic acid (OA), a lipophilic phycotoxin is mainly produced by toxigenic dinoflagellates. The need to develop high performing methods for OA analysis able to improve the traditional ones is evident. In this work, a novel experimental methodology for label-free detection of OA was developed. Protein G magnetic beads (protein-G-MBs) modified gold electrode was used to immobilize anti-OA monoclonal antibody (anti-OA-MAb). Preliminary, colorimetric tests were performed in order to validate protein-G-MBs and anti-OA-MAb reaction. Electrochemical detection was carried out by differential pulse voltammetry in ferri/ferrocyanide solution. The limit of detection value obtained (0.5 μg L(-1)) validated the developed electrochemical immunosensor as a promising tool for routine use. The matrix effect and the recovery rate were also assessed with real samples, showing a good percentage of recovery.

Magnetic Beads-Based Electrochemical Sensors Applied to the Detection and Quantification of Bioterrorism/Biohazard Agents

Nowadays, detecting the presence of bioterrorism and biohazard agents in environmental and food samples is of great concern, due to their toxicity, and because many of them are prone to be used in terrorism attacks. The use of functionalized magnetic beads (MBs) in the development of electrochemical immuno- and genosensors has resulted in innovative and powerful detection strategies that may be applied to environmental, food and clinical analysis. This review describes current research on the combination of functionalized MBs with electrochemical detection for the development of magnetobiosensors applied to rapid, sensitive and specific detection of bioterrorism and biohazard agents.

Integrated electrokinetic magnetic bead-based electrochemical immunoassay on microfluidic chips for reliable control of permitted levels of zearalenone in infant foods

Microfluidic technology has now become a novel sensing platform where different analytical steps, biological recognition materials and suitable transducers can be cleverly integrated yielding a new sensor generation. A novel "lab-on-a-chip" strategy integrating an electrokinetic magnetic bead-based electrochemical immunoassay on a microfluidic chip for reliable control of permitted levels of zearalenone in infant foods is proposed. The strategy implies the creative use of the simple channel layout of the double-T microchip to perform sequentially the immunointeraction and enzymatic reaction by applying a program of electric fields suitably connected to the reservoirs for driving the fluidics at different chambers in order to perform the different reactions. Both zones are used with the aid of a magnetic field to avoid in a very simple and elegant way the non-specific adsorption. Immunological reaction is performed under a competitive enzyme-linked immunosorbent assay (ELISA) where the mycotoxin ZEA and an enzyme-labelled derivative compete for the binding sites of the specific monoclonal antibody immobilised onto protein G modified magnetic beads. Horseradish peroxidase (HRP), in the presence of hydrogen peroxide, catalyses the oxidation of hydroquinone (HQ) to benzoquinone (BQN), whose back electrochemical reduction was detected at +0.1 V. Controlled-electrokinetic fluidic handling optimized conditions are addressed for all analytical steps cited above, and allows performing the complete immunoassay for the target ZEA analyte in less than 15 minutes with unique analytical merits: competitive immunoassay currents showed a very well-defined concentration dependence with a good precision as well as a suitable limit of detection of 0.4 µg L(-1), well below the legislative requirements, and an extremely low systematic error of 2% from the analysis of a maize certified reference material revealing additionally an excellent accuracy. Also, the reliability of the approach is demonstrated by the analysis of selected infant foods yielding the strictest ZEA permitted levels and excellent recoveries of 103 and 101% for solid and liquid samples, respectively.

Studies in the use of magnetic microspheres for immunoaffinity extraction of paralytic shellfish poisoning toxins from shellfish

Paralytic shellfish poisoning (PSP) is a potentially fatal human health condition caused by the consumption of shellfish containing high levels of PSP toxins. Toxin extraction from shellfish and from algal cultures for use as standards and analysis by alternative analytical monitoring methods to the mouse bioassay is extensive and laborious. This study investigated whether a selected MAb antibody could be coupled to a novel form of magnetic microsphere (hollow glass magnetic microspheres, brand name Ferrospheres-N) and whether these coated microspheres could be utilized in the extraction of low concentrations of the PSP toxin, STX, from potential extraction buffers and spiked mussel extracts. The feasibility of utilizing a mass of 25 mg of Ferrospheres-N, as a simple extraction procedure for STX from spiked sodium acetate buffer, spiked PBS buffer and spiked mussel extracts was determined. The effects of a range of toxin concentrations (20-300 ng/mL), incubation times and temperature on the capability of the immuno-capture of the STX from the spiked mussel extracts were investigated. Finally, the coated microspheres were tested to determine their efficiency at extracting PSP toxins from naturally contaminated mussel samples. Toxin recovery after each experiment was determined by HPLC analysis. This study on using a highly novel immunoaffinity based extraction procedure, using STX as a model, has indicated that it could be a convenient alternative to conventional extraction procedures used in toxin purification prior to sample analysis.

Developments in mycotoxin analysis: an update for 2009-2010

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2009 and mid-2010. It covers the major mycotoxins aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxin, patulin, trichothecenes, and zearalenone. New and improved methods for mycotoxins continue to be published. Immunological-based method developments continue to be of wide interest in a broad range of formats. Multimycotoxin determination by LC-MS/MS is now being targeted at the specific ranges of mycotoxins and matrices of interest or concern to the individual laboratory. Although falling outside the main emphasis of the review, some aspects of natural occurrence have been mentioned, especially if linked to novel method developments.