1
|
Farina R, D’Arrigo G, Alberti A, Scalese S, Capuano GE, Corso D, Screpis GA, Coniglio MA, Condorelli GG, Libertino S. Copper Micro-Flowers for Electrocatalytic Sensing of Nitrate Ions in Water. SENSORS (BASEL, SWITZERLAND) 2024; 24:4501. [PMID: 39065899 PMCID: PMC11280502 DOI: 10.3390/s24144501] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/31/2024] [Revised: 07/02/2024] [Accepted: 07/09/2024] [Indexed: 07/28/2024]
Abstract
The progressive increase in nitrate's (NO3-) presence in surface and groundwater enhances environmental and human health risks. The aim of this work is the fabrication and characterization of sensitive, real-time, low-cost, and portable amperometric sensors for low NO3- concentration detection in water. Copper (Cu) micro-flowers were electrodeposited on top of carbon screen-printed electrodes (SPCEs) via cyclic voltammetry (with voltage ranging from -1.0 V to 0.0 V at a scan rate of 0.1 V s-1). The obtained sensors exhibited a high catalytic activity toward the electro-reduction in NO3-, with a sensitivity of 44.71 μA/mM. They had a limit of detection of 0.87 µM and a good dynamic linear concentration range from 0.05 to 3 mM. The results were compared to spectrophotometric analysis. In addition, the devices exhibited good stability and a maximum standard deviation (RSD) of 5% after ten measurements; reproducibility, with a maximum RSD of 4%; and repeatability after 10 measurements with the RSD at only 5.63%.
Collapse
Affiliation(s)
- Roberta Farina
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
- Dipartimento di Scienze Chimiche, Università Degli Studi di Catania, Viale A. Doria 6, 95125 Catania, Italy;
| | - Giuseppe D’Arrigo
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| | - Alessandra Alberti
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| | - Silvia Scalese
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| | - Giuseppe E. Capuano
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| | - Domenico Corso
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| | - Giuseppe A. Screpis
- Dipartimento di Scienze Mediche, Chirurgiche e Tecnologie Avanzate “G.F. Ingrassia”, Università Degli Studi di Catania, Via S. Sofia 87, 95123 Catania, Italy; (G.A.S.); (M.A.C.)
| | - Maria Anna Coniglio
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
- Dipartimento di Scienze Mediche, Chirurgiche e Tecnologie Avanzate “G.F. Ingrassia”, Università Degli Studi di Catania, Via S. Sofia 87, 95123 Catania, Italy; (G.A.S.); (M.A.C.)
| | - Guglielmo G. Condorelli
- Dipartimento di Scienze Chimiche, Università Degli Studi di Catania, Viale A. Doria 6, 95125 Catania, Italy;
| | - Sebania Libertino
- IMM–CNR, Strada VIII Z.I., 5, 95121 Catania, Italy; (G.D.); (A.A.); (S.S.); (G.E.C.); (D.C.)
| |
Collapse
|
2
|
Leburu E, Qiao Y, Wang Y, Yang J, Liang S, Yu W, Yuan S, Duan H, Huang L, Hu J, Hou H. Flexible electronics for heavy metal ion detection in water: a comprehensive review. Biomed Microdevices 2024; 26:30. [PMID: 38913209 DOI: 10.1007/s10544-024-00710-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/05/2024] [Indexed: 06/25/2024]
Abstract
Flexible electronics offer a versatile, rapid, cost-effective and portable solution to monitor water contamination, which poses serious threat to the environment and human health. This review paper presents a comprehensive exploration of the versatile platforms of flexible electronics in the context of heavy metal ion detection in water systems. The review overviews of the fundamental principles of heavy metal ion detection, surveys the state-of-the-art materials and fabrication techniques for flexible sensors, analyses key performance metrics and limitations, and discusses future opportunities and challenges. By highlighting recent advances in nanomaterials, polymers, wireless integration, and sustainability, this review aims to serve as an essential resource for researchers, engineers, and policy makers seeking to address the critical challenge of heavy metal contamination in water resources. The versatile promise of flexible electronics is thoroughly elucidated to inspire continued innovation in this emerging technology arena.
Collapse
Affiliation(s)
- Ely Leburu
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Yuting Qiao
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Yanshen Wang
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Jiakuan Yang
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
- State Key Laboratory of Coal Combustion, Huazhong University of Science of and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
| | - Sha Liang
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Wenbo Yu
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Shushan Yuan
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Huabo Duan
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Liang Huang
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China
| | - Jingping Hu
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China.
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China.
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China.
- State Key Laboratory of Coal Combustion, Huazhong University of Science of and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China.
| | - Huijie Hou
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, P.R. China.
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, 1037 Luoyu Road, Wuhan, 430074, P.R. China.
- Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, 430074, China.
| |
Collapse
|
3
|
Hossain MI, Khaleque MA, Ali MR, Bacchu MS, Hossain MS, Shahed SMF, Saad Aly MA, Khan MZH. Development of electrochemical sensors for quick detection of environmental (soil and water) NPK ions. RSC Adv 2024; 14:9137-9158. [PMID: 38505387 PMCID: PMC10949039 DOI: 10.1039/d4ra00034j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2024] [Accepted: 02/23/2024] [Indexed: 03/21/2024] Open
Abstract
All over the world, technology is becoming more and more prevalent in agriculture. Different types of instruments are already being used in this sector. For the time being, every farmer is trying to produce more crops on a piece of land. Eventually, soil loses its nutrients; however, to grow more crops, farmers use more fertilizers without knowing the proper conditions of the soil in real time. To overcome this issue, many scientists have recently focused on developing electrochemical sensors to detect macronutrients, i.e., nitrogen (N), phosphorus (P), and potassium (K), in soil or water rapidly. In this review, we focus mainly on the recent developments in electrochemical sensors used for the detection of nutrients (NPK) in different types of samples. As it is outlined, the use of smart and portable electrochemical sensors can be helpful for the reduction of excess fertilizer and can play a vital role in maintaining suitable conditions in soils and water. We are optimistic that this review can guide researchers in the development of a portable and suitable NPK detection system for soil nutrients.
Collapse
Affiliation(s)
- M I Hossain
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| | - M A Khaleque
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| | - M R Ali
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| | - M S Bacchu
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| | - M S Hossain
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| | - S M F Shahed
- Department of ChemisOy, Graduate School of Science, Tohohi University Aramah'-Aza- Aoba, Aoba-Kii Sendai 9S0S57S Japan
| | - M Aly Saad Aly
- Department of Electrical and Computer Engineering at Georgia Tech Shenzhen Institute (GTSI), Tianjin University Shenzhen Guangdong 5ISO52 China
| | - Md Z H Khan
- Laboratory of Nano-Bio and Advanced Materials Engineering (NAME), Jashore University of Science and technology Jashore 740S Bangladesh
- Department of Chemical Engineering, Jashore University of Science and Technology (JUST) Jashore 740S Bangladesh
| |
Collapse
|
4
|
Amali R, Lim H, Ibrahim I, Zainal Z, Ahmad S. Silver nanoparticles-loaded copper (II)-terephthalate framework nanocomposite as a screen-printed carbon electrode modifier for amperometric nitrate detection. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116440] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
5
|
Stainless steel electrochemical capacitive microneedle sensors for multiplexed simultaneous measurement of pH, nitrates, and phosphates. Mikrochim Acta 2022; 189:206. [PMID: 35501613 DOI: 10.1007/s00604-022-05307-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2021] [Accepted: 04/07/2022] [Indexed: 10/18/2022]
Abstract
Concerns for agri-food safety and environmental management require development of simple to use and cost- and time-effective multiplex sensors for point-of-need (PON) chemical analytics by public end-user. Simultaneous detection of nitrates, phosphates, and pH is of importance in soil and water analysis, agriculture, and food quality assessment. This article demonstrates a suite of stainless steel microneedle electrochemical sensors for multiplexed measurement of pH, nitrate, and phosphate using faradaic capacitance derived from cyclic voltammetry as the mode of detection. The multi-target microneedle sensors were fabricated by layer-by-layer (LbL) assembly in a stainless steel hypodermic microneedle substrate. For nitrate sensing, the stainless steel was coated with carbon nanotube/cellulose nanocrystal (CNT)/CNC) decorated with silver nanoparticles (Ag). For pH measurement, the polyaniline (pANI) was coated onto the CNT/CNC@Ag film, while for phosphate detection, the CNT/CNC/Ag @pANI microneedle was further decorated with ammonium molybdenum tetrahydrate (AMT). The microelectrode platforms were characterized by FTIR, Raman, and microscopic techniques. The nitrate- and phosphate-based microneedle electrochemical sensors had excellent selectivity and sensitivity, with a determined limit of detection (LOD) of 0.008 mM and 0.007 mM, respectively. The pH microneedle sensor was responsive to pH in the linear range of 3-10. The three microneedle sensors yielded repeatable results, with a precision ranging from 4.0 to 7.5% RSD over the concentration ranges tested. The inexpensive (~ 1 $ CAD) microneedle sensors were successfully verified for use in quantification of nitrate, pH, and phosphate in brewed black coffee as a real sample. As such, the microneedle sensors are economical devices and show great promise as robust platforms for PON precision chemical analytics.
Collapse
|
6
|
Silver nanoparticles modified electrodes for electroanalysis: An updated review and a perspective. Microchem J 2022. [DOI: 10.1016/j.microc.2021.107166] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
|
7
|
Aziz A, Asif M, Ashraf G, Iftikhar T, Hu J, Xiao F, Wang S. Boosting electrocatalytic activity of carbon fiber@fusiform-like copper-nickel LDHs: Sensing of nitrate as biomarker for NOB detection. JOURNAL OF HAZARDOUS MATERIALS 2022; 422:126907. [PMID: 34418835 DOI: 10.1016/j.jhazmat.2021.126907] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/04/2021] [Revised: 08/09/2021] [Accepted: 08/11/2021] [Indexed: 06/13/2023]
Abstract
Morphological evolution of layered double hydroxides (LDHs) with preferential crystal facets has appealed gigantic attention of research community. Herein, we prepare hierarchical hybrid material by structurally integrating fusiform-like CuNiAl LDHs petals on conductive backbone of CF (CF@CuNiAl LDHs) and investigate electrocatalytic behavior in nitrate reduction over a potential window of -0.7 V to +0.7 V. The CF@CuNiAl LDHs electrode exhibits remarkable electrocatalytic aptitude in nitrate sensing including broad linear ranges of 5 nM to 40 µM and 75 µM to 2.4 mM with lowest detection limit of 0.02 nM (S/N = 3). The sensor shows sensitivity of 830.5 ± 1.84 µA mM1- cm2- and response time within 3 s. Owing to synergistic collaboration of improved electron transfer kinetics, specific fusiform-like morphology, presence of more catalytically active {111} facets and superb catalytic activity of LDHs, CF@CuNiAl LDHs electrode has outperformed as electrochemical sensor. Encouraged from incredible performance, CF@CuNiAl LDHs flexible electrode has been applied in real-time in-vitro detection of nitrite oxidizing bacteria (NOB) through the sensing of nitrate because NOB convert nitrite into nitrate by characteristic metabolic process to obtain their energy. Further, CF@CuNiAl LDHs based sensing podium has also been employed in in-vitro detection of nitrates from mineral water, tap water and Pepsi drink.
Collapse
Affiliation(s)
- Ayesha Aziz
- Advanced Biomaterials and Tissue Engineering Centre, School of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, PR China
| | - Muhammad Asif
- School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, PR China
| | - Ghazala Ashraf
- Advanced Biomaterials and Tissue Engineering Centre, School of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, PR China
| | - Tayyaba Iftikhar
- School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, PR China
| | - Jinlong Hu
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, PR China
| | - Fei Xiao
- School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, PR China.
| | - Shenqi Wang
- Advanced Biomaterials and Tissue Engineering Centre, School of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, PR China.
| |
Collapse
|
8
|
Singh S, Anil AG, Kumar V, Kapoor D, Subramanian S, Singh J, Ramamurthy PC. Nitrates in the environment: A critical review of their distribution, sensing techniques, ecological effects and remediation. CHEMOSPHERE 2022; 287:131996. [PMID: 34455120 DOI: 10.1016/j.chemosphere.2021.131996] [Citation(s) in RCA: 44] [Impact Index Per Article: 22.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/25/2021] [Revised: 08/13/2021] [Accepted: 08/22/2021] [Indexed: 06/13/2023]
Abstract
Nitrate pollution is eminent in almost all the developing nations as a result of increased natural activities apart from anthropogenic pollution. The release of nitrates in more than critical quantities into the water bodies causes accretion impacts on living creatures, environmental receptors, and human vigour by accumulation through the food chain. Nitrates have recently acquired researchers' huge attention and extend their roots in environmental contamination of surface and groundwater systems. The presence of nitrate in high concentrations in surface and groundwater triggers several health problems, for instance, methemoglobinemia, diabetes, eruption of infectious disorders, harmfully influence aquatic organisms. Sensing nitrate is an alternate option for monitoring the distribution of nitrate in different water bodies. Here we review electrochemical, spectroscopic, and electrical modes of nitrate sensing. It is concluded that, among the various sensors discussed in this review, FET sensors are the most desirable choice. Their sensitivity, ease of use and scope for miniaturisation are exceptional. Advanced functional materials need to be designed to satiate the growing need for environmental monitoring. Different sources of nitrate contamination in ground and surface water can be estimated using different techniques such as nitrate isotopic composition, co contaminants, water tracers, and other specialized techniques. This review intends to explore the research work on remediation of nitrate from wastewater and soil using different processes such as reverse osmosis, chemical denitrification, biological denitrification, ion exchange, electrodialysis, and adsorption. Denitrification proves as a promising alternative over previously reported techniques in terms of their nitrate removal because of its high cost-effectiveness.
Collapse
Affiliation(s)
- Simranjeet Singh
- Interdisciplinary Centre for Water Research (ICWaR), Indian Institute of Science, Bangalore, 56001, India
| | - Amith G Anil
- Department of Material Engineering, Indian Institute of Science, Bangalore, 56001, India
| | - Vijay Kumar
- Department of Chemistry, Central Ayurveda Research Institute, Jhansi, U.P. , India
| | - Dhriti Kapoor
- Department of Botany, Lovely Professional University, Jalandhar, Punjab, 144111, India
| | - S Subramanian
- Department of Material Engineering, Indian Institute of Science, Bangalore, 56001, India
| | - Joginder Singh
- Department of Microbiology, Lovely Professional University, Jalandhar, Punjab, 144111, India.
| | - Praveen C Ramamurthy
- Interdisciplinary Centre for Water Research (ICWaR), Indian Institute of Science, Bangalore, 56001, India.
| |
Collapse
|
9
|
Inam AKS, Costa Angeli MA, Shkodra B, Douaki A, Avancini E, Magagnin L, Petti L, Lugli P. Flexible Screen-Printed Electrochemical Sensors Functionalized with Electrodeposited Copper for Nitrate Detection in Water. ACS OMEGA 2021; 6:33523-33532. [PMID: 34926901 PMCID: PMC8675019 DOI: 10.1021/acsomega.1c04296] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/10/2021] [Accepted: 11/02/2021] [Indexed: 05/15/2023]
Abstract
Nitrate (NO3 -) contamination is becoming a major concern due to the negative effects of an excessive NO3 - presence in water which can have detrimental effects on human health. Sensitive, real-time, low-cost, and portable measurement systems able to detect extremely low concentrations of NO3 - in water are thus becoming extremely important. In this work, we present a novel method to realize a low-cost and easy to fabricate amperometric sensor capable of detecting small concentrations of NO3 - in real water samples. The novel fabrication technique combines printing of a silver (Ag) working electrode with subsequent modification of the electrode with electrodeposited copper (Cu) nanoclusters. The process was tuned in order to reach optimized sensor response, with a high catalytic activity toward electroreduction of NO3 - (sensitivity: 19.578 μA/mM), as well as a low limit of detection (LOD: 0.207 nM or 0.012 μg/L) and a good dynamic linear concentration range (0.05 to 5 mM or 31 to 310 mg/L). The sensors were tested against possible interference analytes (NO2 -, Cl-, SO4 2-, HCO3 -, CH3COO-, Fe2+, Fe3+, Mn2+, Na+, and Cu2+) yielding only negligible effects [maximum standard deviation (SD) was 3.9 μA]. The proposed sensors were also used to detect NO3 - in real samples, including tap and river water, through the standard addition method, and the results were compared with the outcomes of high-performance liquid chromatography (HPLC). Temperature stability (maximum SD 3.09 μA), stability over time (maximum SD 3.69 μA), reproducibility (maximum SD 3.20 μA), and repeatability (maximum two-time useable) of this sensor were also investigated.
Collapse
Affiliation(s)
- A. K.
M. S. Inam
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
- Department
of Nutrition and Food Engineering, Daffodil
International University, Dhaka 1207, Bangladesh
| | | | - Bajramshahe Shkodra
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
| | - Ali Douaki
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
| | - Enrico Avancini
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
| | - Luca Magagnin
- Department
of Chemistry, Materials and Chemical Engineering
“Giulio Natta”, Politecnico di Milano, Milano 20133, Italy
| | - Luisa Petti
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
| | - Paolo Lugli
- Faculty
of Science and Technology, Free University
of Bozen-Bolzano, Bolzano 39100, Italy
| |
Collapse
|
10
|
Kanoun O, Lazarević-Pašti T, Pašti I, Nasraoui S, Talbi M, Brahem A, Adiraju A, Sheremet E, Rodriguez RD, Ben Ali M, Al-Hamry A. A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring. SENSORS (BASEL, SWITZERLAND) 2021; 21:4131. [PMID: 34208587 PMCID: PMC8233775 DOI: 10.3390/s21124131] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/06/2021] [Revised: 05/31/2021] [Accepted: 06/02/2021] [Indexed: 12/12/2022]
Abstract
Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.
Collapse
Affiliation(s)
- Olfa Kanoun
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
| | - Tamara Lazarević-Pašti
- Department of Physical Chemistry, “VINČA” Institute of Nuclear Sciences—National Institute of the Republic of Serbia, University of Belgrade, 11000 Belgrade, Serbia;
| | - Igor Pašti
- Faculty of Physical Chemistry, University of Belgrade, 11000 Belgrade, Serbia;
| | - Salem Nasraoui
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
- NANOMISENE Lab, LR16CRMN01, Centre for Research on Microelectronics and Nanotechnology of Sousse, Technopole of Sousse B.P. 334, Sahloul, Sousse 4034, Tunisia;
- Higher Institute of Applied Sciences and Technology of Sousse, University of Sousse, 4003 Tunisia of Sousse, GREENS-ISSAT, Cité Ettafala, Ibn Khaldoun, Sousse 4003, Tunisia
| | - Malak Talbi
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
- NANOMISENE Lab, LR16CRMN01, Centre for Research on Microelectronics and Nanotechnology of Sousse, Technopole of Sousse B.P. 334, Sahloul, Sousse 4034, Tunisia;
- Higher Institute of Applied Sciences and Technology of Sousse, University of Sousse, 4003 Tunisia of Sousse, GREENS-ISSAT, Cité Ettafala, Ibn Khaldoun, Sousse 4003, Tunisia
| | - Amina Brahem
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
- NANOMISENE Lab, LR16CRMN01, Centre for Research on Microelectronics and Nanotechnology of Sousse, Technopole of Sousse B.P. 334, Sahloul, Sousse 4034, Tunisia;
- Higher Institute of Applied Sciences and Technology of Sousse, University of Sousse, 4003 Tunisia of Sousse, GREENS-ISSAT, Cité Ettafala, Ibn Khaldoun, Sousse 4003, Tunisia
| | - Anurag Adiraju
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
| | - Evgeniya Sheremet
- Research School of Physics, Tomsk Polytechnic University, Tomsk 634050, Russia;
| | - Raul D. Rodriguez
- Research School of Chemical and Biomedical Technologies, Tomsk Polytechnic University, Tomsk 634050, Russia;
| | - Mounir Ben Ali
- NANOMISENE Lab, LR16CRMN01, Centre for Research on Microelectronics and Nanotechnology of Sousse, Technopole of Sousse B.P. 334, Sahloul, Sousse 4034, Tunisia;
- Higher Institute of Applied Sciences and Technology of Sousse, University of Sousse, 4003 Tunisia of Sousse, GREENS-ISSAT, Cité Ettafala, Ibn Khaldoun, Sousse 4003, Tunisia
| | - Ammar Al-Hamry
- Professorship Measurement and Sensor Technology, Chemnitz University of Technology, 09111 Chemnitz, Germany; (S.N.); (M.T.); (A.B.); (A.A.); (A.A.-H.)
| |
Collapse
|
11
|
Wang J, Li Y, Pan D, Han H, Zhang P. Self-assembly of silver nanoparticles on chitosan/polyvinylpyrrolidone modified micro-needle electrode for amperometric detection of nitrate in seawater. Microchem J 2021. [DOI: 10.1016/j.microc.2021.105965] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
12
|
Sibug-Torres SM, Go LP, Castillo VCG, Pauco JLR, Enriquez EP. Fully integrated 3D-printed electrochemical cell with a modified inkjet-printed Ag electrode for voltammetric nitrate analysis. Anal Chim Acta 2021; 1160:338430. [PMID: 33894964 DOI: 10.1016/j.aca.2021.338430] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2021] [Revised: 03/12/2021] [Accepted: 03/16/2021] [Indexed: 01/14/2023]
Abstract
To address the need for low-cost analytical tools for on-site aquaculture water quality monitoring, miniaturized electrochemical sensor systems can be readily fabricated using additive manufacturing technologies such as 3D printing and inkjet printing. In this work, we report the design and fabrication of an additively manufactured electrochemical platform featuring a reusable 3D-printed electrochemical cell with integrated reference and counter electrodes, and a replaceable inkjet-printed Ag (IJP-Ag) working electrode. The electrochemical cell was 3D-printed with acrylonitrile butadiene styrene (ABS) filament and features a 3D-printed ABS-carbon counter electrode and a Ag|AgCl|gel-KCl reference electrode with a 3D-printed porous junction directly integrated along the sides of the sample compartment. The application of the integrated cell is demonstrated with the analysis of nitrate ions on the IJP-Ag electrode, which was modified with electrodeposited nanostructured Ag to enhance sensitivity to nitrate reduction. Linear sweep voltammetry (LSV) was successfully applied to detect nitrate with a LOD of 1.40 ppm and a sensitivity of 0.2086 μA ppm-1 in a background of artificial brackish aquaculture water (pH 8.0). The sensor response showed intra- and inter-electrode reproducibility and no significant interferences to most of the commonly encountered cations and anions in brackish water. The electrochemical sensor system was also applied to nitrate determination in real aquaculture water samples and demonstrated no significant differences with the results obtained using the standard spectrophotometric method at a 95% confidence level. Our results show how additive manufacturing is a promising approach to readily fabricate fit-for-purpose, low-cost miniaturized electrochemical sensor systems for point-of-use applications.
Collapse
Affiliation(s)
| | - Lance P Go
- Department of Chemistry, Ateneo de Manila University, Quezon City, 1108, Philippines
| | | | - Jiena Lynne R Pauco
- Department of Chemistry, Ateneo de Manila University, Quezon City, 1108, Philippines
| | - Erwin P Enriquez
- Department of Chemistry, Ateneo de Manila University, Quezon City, 1108, Philippines.
| |
Collapse
|
13
|
Patella B, Russo RR, O'Riordan A, Aiello G, Sunseri C, Inguanta R. Copper nanowire array as highly selective electrochemical sensor of nitrate ions in water. Talanta 2020; 221:121643. [PMID: 33076163 DOI: 10.1016/j.talanta.2020.121643] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2020] [Revised: 09/05/2020] [Accepted: 09/07/2020] [Indexed: 12/25/2022]
Abstract
Contamination of water with nitrate ions is a significant problem that affects many areas of the world. For this reason, European legislation has set the maximum permissible concentration of nitrates in drinking water at 44 mg/L. Thus, it is clear that a continuous monitoring of nitrate ions is of high technological interest but it must be rapid, easy to perform and directly performable in situ. In this work we have developed a nanostructured sensor based on array of copper nanowires obtained with the simple method of galvanic deposition. The nanostructured sensors have a very short response time with a detection limit less than 10 μM. Different interfering species were tested finding a negligible effect except for the chloride ions. However, this problem has been solved by removing chloride ions from the water through a simple precipitation of chloride compounds with low solubility. Nanostructured sensors were also used to analyze real water samples (rain, river and drinking water). In the case of drinking water, we have measured a concentration of nitrate ions very close to the that measured by conventional laboratory techniques.
Collapse
Affiliation(s)
- B Patella
- Laboratorio di Chimica Fisica Applicata, Dipartimento di Ingegneria, Università of Palermo, Viale delle Scienze, Palermo, Italy
| | - R R Russo
- Laboratorio di Chimica Fisica Applicata, Dipartimento di Ingegneria, Università of Palermo, Viale delle Scienze, Palermo, Italy
| | - A O'Riordan
- Nanotechnology Group, Tyndall National Institute, University College Cork, Dyke Parade, Cork, Ireland
| | - G Aiello
- Laboratorio di Chimica Fisica Applicata, Dipartimento di Ingegneria, Università of Palermo, Viale delle Scienze, Palermo, Italy
| | - C Sunseri
- Laboratorio di Chimica Fisica Applicata, Dipartimento di Ingegneria, Università of Palermo, Viale delle Scienze, Palermo, Italy
| | - R Inguanta
- Laboratorio di Chimica Fisica Applicata, Dipartimento di Ingegneria, Università of Palermo, Viale delle Scienze, Palermo, Italy.
| |
Collapse
|
14
|
Jiang C, He Y, Liu Y. Recent advances in sensors for electrochemical analysis of nitrate in food and environmental matrices. Analyst 2020; 145:5400-5413. [PMID: 32572401 DOI: 10.1039/d0an00823k] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
Abstract
Nitrate is one of the most common contaminants in food and the environment and mainly arises from intense human activities. Electrochemical sensors have been considered as one of the most promising analytical tools for the rapid detection of nitrate in food and environmental matrices due to their quick response, high sensitivity, ease of operation and miniaturisation, and low sample and power consumption. In this review, we summarise advances in sensors for electrochemical analysis of nitrate over the past decade. We also discuss the application of electrochemical sensing systems for the determination of nitrate in the matrices of fresh water, seawater, food, soil and particulate matter.
Collapse
Affiliation(s)
- Chunbo Jiang
- College of Science and Engineering, James Cook University, Townsville, Queensland 4811, Australia.
| | | | | |
Collapse
|
15
|
Electrochemical formation of silver nanoparticles and their applications in the reduction and detection of nitrates at neutral pH. J APPL ELECTROCHEM 2019. [DOI: 10.1007/s10800-019-01374-3] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
16
|
Sousa NG, Sousa CP, Campos OS, de Lima-Neto P, Correia AN. One-step preparation of silver electrodeposits from non-aqueous solvents. J Mol Liq 2019. [DOI: 10.1016/j.molliq.2019.111091] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
17
|
Cu and CuPb electrodes prepared via potentiostatic electrodeposition from metal oxides in hydrophobic protic amide-type ionic liquid/water mixture under ambient air for nonenzymatic nitrate reduction. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.05.057] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
18
|
Zhao S, Tong J, Li Y, Sun J, Bian C, Xia S. Palladium-Gold Modified Ultramicro Interdigital Array Electrode Chip for Nitrate Detection in Neutral Water. MICROMACHINES 2019; 10:mi10040223. [PMID: 30934835 PMCID: PMC6523635 DOI: 10.3390/mi10040223] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/26/2019] [Revised: 03/25/2019] [Accepted: 03/26/2019] [Indexed: 11/16/2022]
Abstract
An ultramicro interdigital array electrode modified by palladium-gold was developed for nitrate detection in neutral water. The ultramicro interdigital array electrode was fabricated based on silicon substrate by Micro Electro-Mechanical System (MEMS) technique. The nanostructured palladium-gold (Pd-AuNPs) composite sensing film was electrodeposited on the surface of a working electrode by electrochemical method. The synergistic effect of Pd-AuNPs composite was investigated and its enhancement of the catalytic activity and stability was revealed. The Pd-AuNPs modified electrode showed good linearity (R² = 0.99) from 1 mg/L to 15 mg/L (as N) for nitrate determination in a neutral water environment (pH = 7.2), with a sensitivity of 4.7 μA·mg-1·L. The results showed that the developed Pd-AuNPs-modified ultramicro interdigital array electrode chip can achieve sensitive and environmentally-friendly detection for nitrate in neutral water.
Collapse
Affiliation(s)
- Shanshan Zhao
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
- University of Chinese Academy of Sciences, Beijing 100049, China.
| | - Jianhua Tong
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
| | - Yang Li
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
| | - Jizhou Sun
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
| | - Chao Bian
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
| | - Shanhong Xia
- State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China.
| |
Collapse
|
19
|
In Situ Metalorganic Deposition of Silver Nanoparticles on Gold Substrate and Square Wave Voltammetry: A Highly Efficient Combination for Nanomolar Detection of Nitrate Ions in Sea Water. CHEMOSENSORS 2018. [DOI: 10.3390/chemosensors6040050] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The electro-reduction of nitrate ions in artificial sea water was investigated at a gold substrate (EAu) functionalized by silver nanoparticles (AgNPs). These AgNPs were generated in situ on the gold substrate by the direct decomposition of the metalorganic N,N′-diisopropylacetamidinate silver precursor [Ag(Amd)] in the liquid phase. Very small and well dispersed AgNPs were deposited on the gold electrode and then used as working electrode (EAu/AgNPs). Square wave voltammetry (SWV) was successfully employed to detect nitrate ions (NO3−) with a detection limit (LOD) of 0.9 nmol∙L−1 in artificial sea water (pH = 6.0) without pre-concentration or pH adjustment.
Collapse
|
20
|
Zhao Q, Zhou H, Wu W, Wei X, Jiang S, Zhou T, Liu D, Lu Q. Sensitive electrochemical detection of tetrabromobisphenol A based on poly(diallyldimethylammonium chloride) modified graphitic carbon nitride-ionic liquid doped carbon paste electrode. Electrochim Acta 2017. [DOI: 10.1016/j.electacta.2017.09.114] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
|
21
|
Gumpu MB, Nesakumar N, Ramachandra BL, Rayappan JBB. Zinc oxide nanoparticles-based electrochemical sensor for the detection of nitrate ions in water with a low detection limit—a chemometric approach. JOURNAL OF ANALYTICAL CHEMISTRY 2017. [DOI: 10.1134/s1061934817030078] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
22
|
Ahmad R, Bhat KS, Ahn MS, Hahn YB. Fabrication of a robust and highly sensitive nitrate biosensor based on directly grown zinc oxide nanorods on a silver electrode. NEW J CHEM 2017. [DOI: 10.1039/c7nj02526b] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
This article reports the fabrication of a robust and highly sensitive nitrate biosensor based on directly-grown ZnO NRs on an electrode surface.
Collapse
Affiliation(s)
- Rafiq Ahmad
- School of Semiconductor and Chemical Engineering
- Nanomaterials Processing
- Research Center
- Chonbuk National University
- Jeonju-si
| | - Kiesar Sideeq Bhat
- School of Semiconductor and Chemical Engineering
- Nanomaterials Processing
- Research Center
- Chonbuk National University
- Jeonju-si
| | - Min-Sang Ahn
- School of Semiconductor and Chemical Engineering
- Nanomaterials Processing
- Research Center
- Chonbuk National University
- Jeonju-si
| | - Yoon-Bong Hahn
- School of Semiconductor and Chemical Engineering
- Nanomaterials Processing
- Research Center
- Chonbuk National University
- Jeonju-si
| |
Collapse
|