An asymmetric chitosan scaffold for tendon tissue engineering: In vitro and in vivo evaluation with rat tendon stem/progenitor cells

Role of tendon-derived stem cells in tendon and ligament repair: focus on tissue engineer

This review offered a comprehensive analysis of tendon and ligament injuries, emphasizing the crucial role of tendon-derived stem cells (TDSCs) in tissue engineering as a potential solution for these challenging medical conditions. Tendon and ligament injuries, prevalent among athletes, the elderly, and laborers, often result in long-term disability and reduced quality of life due to the poor intrinsic healing capacity of these avascular structures. The formation of biomechanically inferior scar tissue and a high rate of reinjury underscore the need for innovative approaches to enhance and guide the regenerative process. This review delved into the complexities of tendon and ligament structure and function, types of injuries and their impacts, and the limitations of the natural repair process. It particularly focused on the role of TDSCs within the context of tissue engineering. TDSCs, with their ability to differentiate into tenocytes, are explored in various applications, including biocompatible scaffolds for cell tracking, co-culture systems to optimize tendon-bone healing, and graft healing techniques. The review also addressed the challenges of immunoreactivity post-transplantation, the importance of pre-treating TDSCs, and the potential of hydrogels and decellularized matrices in supporting tendon regeneration. It concluded by highlighting the essential roles of mechanical and molecular stimuli in TDSC differentiation and the current challenges in the field, paving the way for future research directions.

Hyaluronic acid/PEO electrospun tube reduces tendon adhesion to levels comparable to native tendons - An in vitro and in vivo study

A major problem after tendon injury is adhesion formation to the surrounding tissue leading to a limited range of motion. A viable strategy to reduce adhesion extent is the use of physical barriers that limit the contact between the tendon and the adjacent tissue. The purpose of this study was to fabricate an electrospun bilayered tube of hyaluronic acid/polyethylene oxide (HA/PEO) and biodegradable DegraPol® (DP) to improve the anti-adhesive effect of the implant in a rabbit Achilles tendon full laceration model compared to a pure DP tube. Additionally, the attachment of rabbit tenocytes on pure DP and HA/PEO containing scaffolds was tested and Scanning Electron Microscopy, Fourier-transform Infrared Spectroscopy, Differential Scanning Calorimetry, Water Contact Angle measurements, and testing of mechanical properties were used to characterize the scaffolds. In vivo assessment after three weeks showed that the implant containing a second HA/PEO layer significantly reduced adhesion extent reaching levels comparable to native tendons, compared with a pure DP implant that reduced adhesion formation only by 20 %. Tenocytes were able to attach to and migrate into every scaffold, but cell number was reduced over two weeks. Implants containing HA/PEO showed better mechanical properties than pure DP tubes and with the ability to entirely reduce adhesion extent makes this implant a promising candidate for clinical application in tendon repair.

Harnessing three-dimensional porous chitosan microsphere embedded with adipose-derived stem cells to promote nerve regeneration

BACKGROUND

Nerve guide conduits are a promising strategy for reconstructing peripheral nerve defects. Improving the survival rate of seed cells in nerve conduits is still a challenge and microcarriers are an excellent three-dimensional (3D) culture scaffold. Here, we investigate the effect of the 3D culture of microcarriers on the biological characteristics of adipose mesenchymal stem cells (ADSCs) and to evaluate the efficacy of chitosan nerve conduits filled with microcarriers loaded with ADSCs in repairing nerve defects.

METHODS

In vitro, we prepared porous chitosan microspheres by a modified emulsion cross-linking method for loading ADSCs and evaluated the growth status and function of ADSCs. In vivo, ADSCs-loaded microcarriers were injected into chitosan nerve conduits to repair a 12 mm sciatic nerve defect in rats.

RESULTS

Compared to the conventional two-dimensional (2D) culture, the prepared microcarriers were more conducive to the proliferation, migration, and secretion of trophic factors of ADSCs. In addition, gait analysis, neuro-electrophysiology, and histological evaluation of nerves and muscles showed that the ADSC microcarrier-loaded nerve conduits were more effective in improving nerve regeneration.

CONCLUSIONS

The ADSCs-loaded chitosan porous microcarrier prepared in this study has a high cell engraftment rate and good potential for peripheral nerve repair.

In vivo study on the repair of rat Achilles tendon injury treated with non-thermal atmospheric-pressure helium microplasma jet

Non-thermal atmospheric-pressure plasma (NTAPP) has been widely studied for clinical applications, e.g., disinfection, wound healing, cancer therapy, hemostasis, and bone regeneration. It is being revealed that the physical and chemical actions of plasma have enabled these clinical applications. Based on our previous report regarding plasma-stimulated bone regeneration, this study focused on Achilles tendon repair by NTAPP. This is the first study to reveal that exposure to NTAPP can accelerate Achilles tendon repair using a well-established Achilles tendon injury rat model. Histological evaluation using the Stoll's and histological scores showed a significant improvement at 2 and 4 weeks, with type I collagen content being substantial at the early time point of 2 weeks post-surgery. Notably, the replacement of type III collagen with type I collagen occurred more frequently in the plasma-treated groups at the early stage of repair. Tensile strength test results showed that the maximum breaking strength in the plasma-treated group at two weeks was significantly higher than that in the untreated group. Overall, our results indicate that a single event of NTAPP treatment during the surgery can contribute to an early recovery of an injured tendon.

Microfluidically Aligned Collagen to Maintain the Phenotype of Tenocytes In Vitro

Tendon is a highly organized tissue that transmits forces between muscle and bone. The architecture of the extracellular matrix of tendon, predominantly from collagen type I, is important for maintaining tenocyte phenotype and function. Therefore, in repair and regeneration of damaged and diseased tendon tissue, it is crucial to restore the aligned arrangement of the collagen type I fibers of the original matrix. To this end, a novel, user-friendly microfluidic piggyback platform is developed allowing the controlled patterned formation and alignment of collagen fibers simply on the bottom of culture dishes. Rat tenocytes cultured on the micropatterns of aligned fibrous collagen exhibit a more elongated morphology. The cells also show an increased expression of tenogenic markers at the gene and protein level compared to tenocytes cultured on tissue culture plastic or non-fibrillar collagen coatings. Moreover, using imprinted polystyrene replicas of aligned collagen fibers, this work shows that the fibrillar structure of collagen per se affects the tenocyte morphology, whereas the biochemical nature of collagen plays a prominent role in the expression of tenogenic markers. Beyond the controlled provision of aligned collagen, the microfluidic platform can aid in developing more physiologically relevant in vitro models of tendon and its regeneration.

Synthesis and characterization of chitosan/collagen/polycaprolactone hydrogel films with enhanced biocompatibility and hydrophilicity for artificial tendon applications

Regenerative medicine confronts various obstacles, such as creating and advancing biomaterials. Besides being safe, such materials should promote cellular activity. Polycaprolactone (PCL) has numerous medical applications as an engineering material. However, these polymers lack hydrophilicity. Herein, chitosan (CS)/collagen (COL)/polycaprolactone hydrogel films (CSCPs) were synthesized with different weight ratios of PCL; specifically, CS/COL (CSC): PCL content of 1:3, 1:6, and 1:9. For this purpose, novel COL immobilization on CS was performed via covalent attachment. Following the addition of PCL to CSC hydrogel, the resulting CSCP hydrogel films were characterized using tensile measurements, TGA, XRD, FTIR, and FE-SEM. A greater PCL content increases the elongation at break from 134.8 to 369.5 % and the tensile strength of the hydrogel films from 4.8 to 18.4 MPa. The hydrophobicity of prepared specimens was assessed through water absorption and contact-angle tests. For CSCP3 to CSCP9, the water contact angle increased from 61.03° to 70.82°. After 48 days, CSCP6 and CSCP9 hydrogel films demonstrated a slow rate of degradation, losing <15 % of their weight. Moreover, all three types of hydrogel films exhibited high biocompatibility (higher than 95 % after three days), as confirmed by the MTT assay. The hemolysis rates of CSCP hydrogel films were <2 %, which could be deemed safe for contact with a blood environment. The presence of no costly and bio-based crosslinking agents and desired characteristics for tissue engineering applications suggest that CSCP hydrogel films may be promising candidates for use in artificial tendons.

Tendon Repair and Regeneration Using Bioinspired Fibrillation Engineering That Mimicked the Structure and Mechanics of Natural Tissue

Replicating the controlled nanofibrillar architecture of collagenous tissue represents a promising approach in the design of tendon replacements that have tissue-mimicking biomechanics─outstanding mechanical strength and toughness, defect tolerance, and fatigue and fracture resistance. Guided by this principle, a fibrous artificial tendon (FAT) was constructed in the present study using an engineering strategy inspired by the fibrillation of a naturally spun silk protein. This bioinspired FAT featured a highly ordered molecular and nanofibrillar architecture similar to that of soft collagenous tissue, which exhibited the mechanical and fracture characteristics of tendons. Such similarities provided the motivation to investigate FAT for applications in Achilles tendon defect repair. In vitro cellular morphology and expression of tendon-related genes in cell culture and in vivo modeling of tendon injury clearly revealed that the highly oriented nanofibrils in the FAT substantially promoted the expression of tendon-related genes combined with the Achilles tendon structure and function. These results provide confidence about the potential clinical applications of the FAT.

Chitosan: a green adhesive for surface functionalization and fabrication of thermoplastic biomedical microdevices

Chitosan (CS) is a natural polymer that exhibits many biological properties and is used as a biomaterial for antibacterial coatings, tissue engineering, cell research, drug delivery, and negatively charged molecule capture. In our previous study, we used a CS-polydopamine mixture to realize UV-assisted bonding between poly(methyl methacrylate) (PMMA) substrates to fabricate microdevices for self-assembled stem cell spheroid cultures. Herein, we attained reliable adhesive bonding between PMMAs using CS at room temperature assisted by oxygen plasma. The bond strength of adhesion was as high as 2.1 MPa, which could be stable for over two months according to the leak test. The adhesive bonding and surface functionalization of the microchannels were simultaneously completed such that the microdevices could be directly used for mesenchymal stem cell culture for spheroid generation and DNA purification for point-of-care testing (POCT) devices. Surface characterization was performed by contact angle measurements, Fourier-transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. The POCT device allows sequential on-chip DNA purification, amplification, and colorimetric detection of pathogenic bacteria. This method provides a convenient and reliable strategy for the fabrication of PMMA microdevices that can be directly implemented in biological studies and POCT applications without involving prior surface modification steps.

Drug Delivery Approaches to Improve Tendon Healing

Tendon injuries disrupt the transmission of forces from muscle to bone, leading to chronic pain, disability, and a large socioeconomic burden. Tendon injuries are prevalent; there are over 300,000 tendon repair procedures a year in the United States to address acute trauma or chronic tendinopathy. Successful restoration of function after tendon injury remains challenging clinically. Despite improvements in surgical and physical therapy techniques, the high complication rate of tendon repair procedures motivates the use of therapeutic interventions to augment healing. While many biological and tissue engineering approaches have attempted to promote scarless tendon healing, there is currently no standard clinical treatment to improve tendon healing. Moreover, the limited efficacy of systemic delivery of several promising therapeutic candidates highlights the need for tendon-specific drug delivery approaches to facilitate translation. This review article will synthesize the current state-of-the-art methods that have been used for tendon-targeted delivery through both systemic and local treatments, highlight emerging technologies used for tissue-specific drug delivery in other tissue systems, and outline future challenges and opportunities to enhance tendon healing through targeted drug delivery.

Bio-Enhanced Neoligaments Graft Bearing FE002 Primary Progenitor Tenocytes: Allogeneic Tissue Engineering & Surgical Proofs-of-Concept for Hand Ligament Regenerative Medicine

Hand tendon/ligament structural ruptures (tears, lacerations) often require surgical reconstruction and grafting, for the restauration of finger mechanical functions. Clinical-grade human primary progenitor tenocytes (FE002 cryopreserved progenitor cell source) have been previously proposed for diversified therapeutic uses within allogeneic tissue engineering and regenerative medicine applications. The aim of this study was to establish bioengineering and surgical proofs-of-concept for an artificial graft (Neoligaments Infinity-Lock 3 device) bearing cultured and viable FE002 primary progenitor tenocytes. Technical optimization and in vitro validation work showed that the combined preparations could be rapidly obtained (dynamic cell seeding of 10⁵ cells/cm of scaffold, 7 days of co-culture). The studied standardized transplants presented homogeneous cellular colonization in vitro (cellular alignment/coating along the scaffold fibers) and other critical functional attributes (tendon extracellular matrix component such as collagen I and aggrecan synthesis/deposition along the scaffold fibers). Notably, major safety- and functionality-related parameters/attributes of the FE002 cells/finished combination products were compiled and set forth (telomerase activity, adhesion and biological coating potentials). A two-part human cadaveric study enabled to establish clinical protocols for hand ligament cell-assisted surgery (ligamento-suspension plasty after trapeziectomy, thumb metacarpo-phalangeal ulnar collateral ligamentoplasty). Importantly, the aggregated experimental results clearly confirmed that functional and clinically usable allogeneic cell-scaffold combination products could be rapidly and robustly prepared for bio-enhanced hand ligament reconstruction. Major advantages of the considered bioengineered graft were discussed in light of existing clinical protocols based on autologous tenocyte transplantation. Overall, this study established proofs-of-concept for the translational development of a functional tissue engineering protocol in allogeneic musculoskeletal regenerative medicine, in view of a pilot clinical trial.

Wet-spinnability and crosslinked Fiber properties of alginate/hydroxyethyl cellulose with varied proportion for potential use in tendon tissue engineering

Researchers have examined different bio-inspired materials in tissue engineering and regenerative medicine to fabricate scaffolds to address tendon regeneration requirements. We developed fibers based on alginate (Alg) and hydroxyethyl cellulose (HEC) by wet-spinning technique to mimic the fibrous sheath of ECM. Various proportions (25:75, 50:50, 75:25) of 1 % Alg and 4 % HEC were blended to this aim. Two steps of crosslinking with different concentrations of CaCl₂ (2.5 and 5 %) and glutaraldehyde (2.5 %) were used to improve physical and mechanical properties. The fibers were characterized by FTIR, SEM, swelling, degradation, and tensile tests. The in vitro proliferation, viability, and migration of tenocytes on the fibers were also evaluated. Moreover, the biocompatibility of implanted fibers was investigated in an animal model. The results showed ionic and covalent molecular interactions between the components. In addition, by properly maintaining surface morphology, fiber alignment, and swelling, lower concentrations of HEC in the blending provided good degradability and mechanical features. The mechanical strength of fibers was in the range of collagenous fibers. Increasing the crosslinking led to significantly different mechanical behaviors in terms of tensile strength and elongation at break. Because of good in vitro and in vivo biocompatibility, tenocyte proliferation, and migration, the biological macromolecular fibers could serve as desirable tendon substitutes. This study provides more practical insight into tendon tissue engineering in translational medicine.

Applications of functionally-adapted hydrogels in tendon repair

Despite all the efforts made in tissue engineering for tendon repair, the management of tendon injuries still poses a challenge, as current treatments are unable to restore the function of tendons following injuries. Hydrogels, due to their exceptional biocompatibility and plasticity, have been extensively applied and regarded as promising candidate biomaterials in tissue regeneration. Varieties of approaches have designed functionally-adapted hydrogels and combined hydrogels with other factors (e.g., bioactive molecules or drugs) or materials for the enhancement of tendon repair. This review first summarized the current state of knowledge on the mechanisms underlying the process of tendon healing. Afterward, we discussed novel strategies in fabricating hydrogels to overcome the issues frequently encountered during the applications in tendon repair, including poor mechanical properties and undesirable degradation. In addition, we comprehensively summarized the rational design of hydrogels for promoting stem-cell-based tendon tissue engineering via altering biophysical and biochemical factors. Finally, the role of macrophages in tendon repair and how they respond to immunomodulatory hydrogels were highlighted.

Recapitulation of growth factor-enriched microenvironment via BMP receptor activating hydrogel

Exposure to a growth factor abundant milieu has remarkable regenerative and rejuvenating effects on organ diseases, tissue damage, and regeneration, including skeletal system defects and bone regeneration. Although the introduction of candidate growth factors into relevant fields has been reported, their regenerative effects remain unsatisfactory, mainly because of the experimental challenges with limited types of growth factors, elusive dosage adjustment, and asynchronous stem cell activation with cytokine secretion. Here, an innovative hydrogel recapitulating a growth factor-enriched microenvironment (GEM) for regenerative advantage, is reported. This sulfated hydrogel includes bone morphogenetic protein-2 (BMP-2), an essential growth factor in osteogenesis, to direct mesenchymal stem cell (MSC) differentiation, stimulate cell proliferation, and improve bone formation. The semi-synthetic hydrogel, sulfonated gelatin (S-Gelatin), can amplify BMP-2 signaling in mouse MSCs by enhancing the binding between BMP-2 and BMP-2 type II receptors (BMPR2), which are located on MSC nuclei and activated by the hydrogel. Importantly, the dramatically improved cytokine secretion of MSCs throughout regeneration confirms the growth factor-acquiring potential of S-Gelatin/rhBMP-2 hydrogel, leading to the vascularization enhancement. These findings provide a new strategy to achieve an in situ GEM and accelerated bone regeneration by amplifying the regenerative capacity of rhBMP-2 and capturing endogenous growth factors.

•

A hydrogel was constructed to amplify the regeneration capacity of BMP-2 and regulate stem cells.

•

The hydrogel can increase MSCs cytokine secretion and construct endogenous growth factor niche.

•

In situ bone formation and vascularization was improved via endogenous growth factor enrichment.

Constructing high-strength nano-micro fibrous woven scaffolds with native-like anisotropic structure and immunoregulatory function for tendon repair and regeneration

Tendon injuries are common debilitating musculoskeletal diseases with high treatment expenditure in sports medicine. The development of tendon-biomimetic scaffolds may be promising for improving the unsatisfactory clinical outcomes of traditional therapies. In this study, we combined an advanced electrospun nanofiber yarn-generating technique with a traditional textile manufacturing strategy to fabricate innovative nano-micro fibrous woven scaffolds with tendon-like anisotropic structure and high-strength mechanical properties for the treatment of large-size tendon injury. Electrospun nanofiber yarns made from pure poly L-lactic acid (PLLA) or silk fibroin (SF)/PLLA blend were fabricated, and their mechanical properties matched and even exceeded those of commercial PLLA microfiber yarns. The PLLA or SF/PLLA nanofiber yarns were then employed as weft yarns interlaced with commercial PLLA microfiber yarns as warp yarns to generate two new types of nanofibrous scaffolds (nmPLLA and nmSF/PLLA) with a plain-weaving structure. Woven scaffolds made from pure PLLA microfiber yarns (both weft and warp directions) (mmPLLA) were used as controls.In vitroexperiments showed that the nmSF/PLLA woven scaffold with aligned fibrous topography significantly promoted cell adhesion, elongation, proliferation, and phenotypic maintenance of tenocytes compared with mmPLLA and nmPLLA woven scaffolds. Moreover, the nmSF/PLLA woven scaffold exhibited the strongest immunoregulatory functions and effectively modulated macrophages towards the M2 phenotype.In vivoexperiments revealed that the nmSF/PLLA woven scaffold notably facilitated Achilles tendon regeneration with improved structure by macroscopic, histological, and ultrastructural observations six months after surgery, compared with the other two groups. More importantly, the regenerated tissue in the nmSF/PLLA group had excellent biomechanical properties comparable to those of the native tendon. Overall, our study provides an innovative biological-free strategy with ready-to-use features, which presents great potential for clinical translation for damaged tendon repair.

Evaluation of poly(N-isopropylacrylamide)/tetraphenylethylene/amphotericin B-based visualized antimicrobial nanofiber wound dressing for whole skin wound healing in rats

The aim of this work is to develop a novel nanofiber wound dressing with multiple functional properties that combines suitable mechanical properties, slow and controlled drug release, antifungal activity, and visual drug monitoring to accelerate wound healing while reducing systemic circulation of the drug, achieving reduced dose and side effects, and achieving patient satisfaction and compliance. In this paper, visualized nanofiber films were prepared using electrostatic spinning technology. This nanofiber wound dressing has soft tissue-like mechanical and antifungal properties and is biocompatible. In particular, the poly(N-isopropylacrylamide) (PNIPAAm)/tetraphenylethylene (TPE)/amphotericin B (AMB) nanofiber films showed good performance in terms of antifungal activity and cytocompatibility compared with medical gauze, and significantly accelerated the wound healing process in a mouse total wound defect model with PCL+PVP+TPE+AMB+PNIPAAm. The wound healing rate of nanofibrous membrane group was 100% at 14 days. In addition, histological analysis, collagen deposition and immunohistochemistry showed, for example, fewer inflammatory cells, more fibroblasts around the damaged area, increased wound epithelial atrophy, reduced granulation tissue, connective tissue reconstruction, epithelial tissue formation, and abundant small angiogenesis in the dermis near the epidermis; a higher level of collagen deposition fraction of 49.97%; and a simultaneous reduction in HIF-1α production and upregulated the expression of CD31. In conclusion, this antifungal nanofiber film showed promising applications throughout the skin wound healing process.

Development of tropoelastin-functionalized anisotropic PCL scaffolds for musculoskeletal tissue engineering

The highly organized extracellular matrix (ECM) of musculoskeletal tissues, encompassing tendons, ligaments and muscles, is structurally anisotropic, hierarchical and multi-compartmental. These features collectively contribute to their unique function. Previous studies have investigated the effect of tissue-engineered scaffold anisotropy on cell morphology and organization for musculoskeletal tissue repair and regeneration, but the hierarchical arrangement of ECM and compartmentalization are not typically replicated. Here, we present a method for multi-compartmental scaffold design that allows for physical mimicry of the spatial architecture of musculoskeletal tissue in regenerative medicine. This design is based on an ECM-inspired macromolecule scaffold. Polycaprolactone (PCL) scaffolds were fabricated with aligned fibers by electrospinning and mechanical stretching, and then surface-functionalized with the cell-supporting ECM protein molecule, tropoelastin (TE). TE was attached using two alternative methods that allowed for either physisorption or covalent attachment, where the latter was achieved by plasma ion immersion implantation (PIII). Aligned fibers stimulated cell elongation and improved cell alignment, in contrast to randomly oriented fibers. TE coatings bound by physisorption or covalently following 200 s PIII treatment promoted fibroblast proliferation. This represents the first cytocompatibility assessment of novel PIII-treated TE-coated PCL scaffolds. To demonstrate their versatility, these 2D anisotropic PCL scaffolds were assembled into 3D hierarchical constructs with an internally compartmentalized structure to mimic the structure of musculoskeletal tissue.

Shear-thinning and self-healing chitosan-graphene oxide hydrogel for hemostasis and wound healing

Hydrogels with injectability, self-healing ability and adhesiveness have great potential for hemostasis and full-thickness skin wound repair, which are usually fabricated by multistep chemical synthesis and the use of organic solvents and catalyst. Herein, we report an injectable and self-healing hydrogel facilely prepared through one-pot heating of chitosan and graphene oxide mixture solution, without any pollutant and waste generated. The dynamic reversible breakage and recombination of noncovalent bonds between chitosan and graphene oxide endows the hydrogel injectability and self-healing ability. In addition, the mechanical and rheological properties of the hydrogels can be controlled by varying the dosage of graphene oxide. Meanwhile, hydrogels exhibited good adhesiveness and hemocompatibility. Finally, in vivo experiments in a rat liver bleeding model and full-thickness skin defect model verified the outstanding hemostatic and wound healing capability of the hydrogels, indicating the promising future for use as wound dressing.

Scavenging of reactive oxygen species can adjust the differentiation of tendon stem cells and progenitor cells and prevent ectopic calcification in tendinopathy

Tendinopathy is a common disorder that leads to pain and impaired quality of life. Recent studies revealed that osteogenic differentiation of tendon stem/progenitor cells (TSPCs) played an important role in the pathogenesis of tendon calcification and tendinopathy. In this study, we found that the growth hormone-releasing hormone agonist (GA) can prevent matrix degradation and osteogenic differentiation in TSPCs. As oxidative stress is a key factor in the osteogenic differentiation of TSPCs, we used bovine serum albumin/heparin nanoparticles (BHNPs), which have biocompatibility and drug loading capacity, to scavenge reactive oxygen species (ROS) and achieve sustained release of GA at the site of inflammation. The newly developed BHNPs@GA had a synergetic effect on reducing ROS production in TSPCs. In addition, BHNPs@GA effectively inhibited tendon calcification and promoted collagen formation in a rat model of tendinopathy. Focusing on the ROS underlying the differentiation and dedifferentiation of TSPCs, this work demonstrated that sustained release of GA targeting ROS and ectopic ossification is a practical therapeutic strategy for treating tendinopathy. STATEMENT OF SIGNIFICANCE: Osteogenic differentiation of tendon stem/progenitor cells (TSPCs) plays an important role in the pathogenesis of ectopic calcification in tendinopathy. In this study, we found that growth hormone-releasing hormone agonist (GA) can reduce reactive oxygen species (ROS) production and adjust TSPCs differentiation. Bovine serum albumin/heparin nanoparticles (BHNPs) were developed to encapsulate GA and achieve sustained release of GA at the site of inflammation. The developed compound, BHNPs@GA, with a synergistic effect of inhibiting ROS and thus, can effectively adjust TSPCs differentiation, inhibit tendon calcification, and promote collagen formation in tendinopathy. This study highlighted the role of ROS underlying the differentiation and dedifferentiation of TSPCs in tendinopathy, and findings may help to identify new therapeutic targets and develop novel strategy for treating tendinopathy.

A Natural Hydrogel with Prohealing Properties Enhances Tendon Regeneration

Tendon regeneration and reduction of peritendinous adhesion remain major clinical challenges. This study addresses these challenges by adopting a unique hydrogel derived from the skin secretion of Andrias davidianus (SSAD) and taking advantage of its biological effects, adhesiveness, and controllable microstructures. The SSAD-derived hydrogel contains many cytokines, which could promote tendon healing. In vitro, leach liquid of SSAD powder could promote tendon stem/progenitor cells migration. In vivo, the SSAD-derived hydrogel featuring double layers possesses strong adhesiveness and could reconnect ruptured Achilles tendons of Sprague-Dawley rats without suturing. The intimal SSAD-derived hydrogel, with a pore size of 241.7 ± 21.0 µm, forms the first layer of the hydrogel to promote tendon healing, and the outer layer SSAD-derived hydrogel, with a pore size of 3.3 ± 1.4 µm, reducing peritendinous adhesion by serving as a dense barrier. Additionally, the SSAD-derived hydrogel exhibits antioxidant and antibacterial characteristics, which further contribute to the reduction of peritendinous adhesion. In vivo studies suggest that the SSAD-derived hydrogel reduces peritendinous adhesion, increases collagen fiber deposition, promotes cell proliferation, and improves the biomechanical properties of the regenerated tendons, indicating better functional restoration. The SSAD-derived bilayer hydrogel may be a feasible biomaterial for tendon repair in the future.

Artificial Intelligence-Assisted Bioinformatics, Microneedle, and Diabetic Wound Healing: A "New Deal" of an Old Drug

Diabetic wounds severely influence life, facing grand challenges in clinical treatments. The demand for better treatment is growing dramatically. Diabetic wound healing is challenging because of inflammation, angiogenesis disruptions, and tissue remodeling. Based on sequencing results of diabetic patients' skins and artificial intelligence (AI)-assisted bioinformatics, we excavate a potential therapeutic agent Trichostatin A (TSA) and a potential target histone deacetylase 4 (HDAC4) for diabetic wound healing. The molecular docking simulation reveals the favorable interaction between TSA and HDAC4. Taking advantage of the microneedle (MN) minimally invasive way to pierce the skin barrier for drug administration, we develop a swelling modified MN-mediated patch loaded with TSA to reduce the probability of injection-caused iatrogenic secondary damage. The MN-mediated TSA patch has been demonstrated to reduce inflammation, promote tissue regeneration, and inhibit HDAC4, which provides superior results in diabetic wound healing. We envisage that our explored specific drug TSA and the related MN-mediated drug delivery system can provide an innovative approach for diabetic wound treatment with simple, effective, and safe features and find a broad spectrum of applications in related biomedical fields.

Advanced Nanofiber-Based Scaffolds for Achilles Tendon Regenerative Engineering

The Achilles tendon (AT) is responsible for running, jumping, and standing. The AT injuries are very common in the population. In the adult population (21–60 years), the incidence of AT injuries is approximately 2.35 per 1,000 people. It negatively impacts people’s quality of life and increases the medical burden. Due to its low cellularity and vascular deficiency, AT has a poor healing ability. Therefore, AT injury healing has attracted a lot of attention from researchers. Current AT injury treatment options cannot effectively restore the mechanical structure and function of AT, which promotes the development of AT regenerative tissue engineering. Various nanofiber-based scaffolds are currently being explored due to their structural similarity to natural tendon and their ability to promote tissue regeneration. This review discusses current methods of AT regeneration, recent advances in the fabrication and enhancement of nanofiber-based scaffolds, and the development and use of multiscale nanofiber-based scaffolds for AT regeneration.

In situ regeneration of bone-to-tendon structures: Comparisons between costal-cartilage derived stem cells and BMSCs in the rat model

Bone-tendon interface (BTI), also called enthesis, is composed of the bone, fibrocartilage, and tendon/ligament with gradual structural characteristics. The unique gradient structure is particularly important for mechanical stress transfer between bone and soft tissues. However, BTI injuries result in fibrous scar repairs and high incidences of re-rupture, which is attributed to the lack of local stem cells with tenogenic and osteogenic potentials. In the rat model, we identified unique stem cells from costal cartilage (CDSCs) with a high in situ regeneration potential of BTI structures. Compared to bone-marrow mesenchymal stem cells (BMSCs), CDSCs exhibit higher self-renewal capacities, better adaptability to low-oxygen and low-nutrient post-transplantation environments, as well as strong bi-potent differentiation abilities of osteogenesis and tenogenesis. After transplantation, CDSCs can survive, proliferate, and in situ gradually regenerate BTI structures. Therefore, CDSCs have a great potential for tissue engineering regeneration in BTI injuries, and have future clinical application prospects. STATEMENT OF SIGNIFICANCE: Tissue engineering is a promising technique for bone-to-tendon interface (BTI) regeneration after injury, but it is still a long way from clinical application. One of the major reasons is the lack of suitable seed cells. This study found an ideal source of seed cells derived from costal cartilages (CDSCs). Compared to the traditional seed cell BMSCs, CDSCs have higher proliferation ability, strong chondrogenic and tenogenic differentiation potential, and better adaptability to low-oxygen and low nutrient conditions. CDSCs were able to survive, proliferate, and regenerate BTI structures in situ, in contrast to BMSCs. CDSCs transplantation showed strong BTI structures regeneration potential both histologically and biomechanically, making it a suitable seed cell for the tissue engineering regeneration of BTI.

Applications of Chitosan and its Derivatives in Skin and Soft Tissue Diseases

Chitosan and its derivatives are bioactive molecules that have recently been used in various fields, especially in the medical field. The antibacterial, antitumor, and immunomodulatory properties of chitosan have been extensively studied. Chitosan can be used as a drug-delivery carrier in the form of hydrogels, sponges, microspheres, nanoparticles, and thin films to treat diseases, especially those of the skin and soft tissue such as injuries and lesions of the skin, muscles, blood vessels, and nerves. Chitosan can prevent and also treat soft tissue diseases by exerting diverse biological effects such as antibacterial, antitumor, antioxidant, and tissue regeneration effects. Owing to its antitumor properties, chitosan can be used as a targeted therapy to treat soft tissue tumors. Moreover, owing to its antibacterial and antioxidant properties, chitosan can be used in the prevention and treatment of soft tissue infections. Chitosan can stop the bleeding of open wounds by promoting platelet agglutination. It can also promote the regeneration of soft tissues such as the skin, muscles, and nerves. Drug-delivery carriers containing chitosan can be used as wound dressings to promote wound healing. This review summarizes the structure and biological characteristics of chitosan and its derivatives. The recent breakthroughs and future trends of chitosan and its derivatives in therapeutic effects and drug delivery functions including anti-infection, promotion of wound healing, tissue regeneration and anticancer on soft tissue diseases are elaborated.

Preliminary in vivo study of biodegradables PLA-PEU-PLA anti-adhesion membranes in a rat Achilles tendon model of peritendinous adhesions

Peritendinous adhesions are complications known to occur up to 6 weeks after surgery and cause chronic pain and disability. Anti-adhesion barriers are currently the best option for prevention. In a...

The application of human periodontal ligament stem cells and biomimetic silk scaffold for in situ tendon regeneration

Background

With the development of tissue engineering, enhanced tendon regeneration could be achieved by exploiting suitable cell types and biomaterials. The accessibility, robust cell amplification ability, superior tendon differentiation potential, and immunomodulatory effects of human periodontal ligament stem cells (hPDLSCs) indicate their potential as ideal seed cells for tendon tissue engineering. Nevertheless, there are currently no reports of using PDLSCs as seed cells. Previous studies have confirmed the potential of silk scaffold for tendon tissue engineering. However, the biomimetic silk scaffold with tendon extracellular matrix (ECM)-like structure has not been systematically studied for in situ tendon regeneration. Therefore, this study aims to evaluate the effects of hPDLSCs and biomimetic silk scaffold on in situ tendon regeneration.

Methods

Human PDLSCs were isolated from extracted wisdom teeth. The differentiation potential of hPDLSCs towards osteo-, chondro-, and adipo-lineage was examined by cultured in different inducing media. Aligned and random silk scaffolds were fabricated by the controlled directional freezing technique. Scaffolds were characterized including surface structure, water contact angle, swelling ratio, degradation speed and mechanical properties. The biocompatibility of silk scaffolds was evaluated by live/dead staining, SEM observation, cell proliferation determination and immunofluorescent staining of deposited collagen type I. Subsequently, hPDLSCs were seeded on the aligned silk scaffold and transplanted into the ruptured rat Achilles tendon. Scaffolds without cells served as control groups. After 4 weeks, histology evaluation was carried out and macrophage polarization was examined to check the repair effects and immunomodulatory effects.

Results

Human PDLSCs were successfully isolated, and their multi-differentiation potential was confirmed. Compared with random scaffold, aligned silk scaffold had more elongated and aligned pores and promoted the proliferation and ordered arrangement of hPDLSCs. After implantation into rat Achilles tendon defect, hPDLSCs seeded aligned silk scaffold enhanced tendon repair with more tendon-like tissue formation after 4 weeks, as compared to the scaffold-only groups. Higher expression of CD206 and lower expression of iNOS, IL-1β and TNF-α were found in the hPDLSCs seeded aligned silk scaffold group, which revealed its modulation effect of macrophage polarization from M1 to M2 phenotype.

Conclusions

In summary, this study demonstrates the efficacy of hPDLSCs as seed cells and aligned silk scaffold as a tendon-mimetic scaffold for enhanced tendon tissue engineering, which may have broad implications for future tendon tissue engineering and regenerative medicine researches.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02661-7.

Cell-subpopulation alteration and FGF7 activation regulate the function of tendon stem/progenitor cells in 3D microenvironment revealed by single-cell analysis

Three dimensional (3D) microenvironments more accurately replicate native microenvironments for stem cell maintenance and function compared with two dimensional (2D) microenvironments. However, the molecular mechanisms by which 3D microenvironments regulate stem cell function remain largely unexplored at the single-cell level. Here, using a single-cell analysis and functional analysis, we found not all cell-subpopulations respond to 3D microenvironments based on a systematically 3D gelatin microcarrier culture system we developed for the expansion and function maintenance of hTSPCs. 3D microenvironments alter the cell-subpopulation distribution of human tendon stem/progenitor cells (hTSPCs) by improving the proportion of ICAM1+ITGB8+ and FGF7+CYGB+ subpopulations. We also revealed the activated FGF7 signaling in the two subpopulations is responsible for the enhanced tenogenesis of hTSPCs through cell-cell interactions. The hTSPCs cultured in 3D niche with a specific cell-subpopulation structure exhibited superior stem-cell characteristics and functions both in vitro and in vivo. Together, our study demonstrates that 3D microenvironments can regulate stem-cell function by modulating the critical cell subpopulation and identifies FGF7 as a novel regulator for tenogenic differentiation and tendon regeneration.

Single Cell Genomics Identifies Unique Cardioprotective Phenotype of Stem Cells derived from Epicardial Adipose Tissue under Ischemia

The conventional management strategies of myocardial infarction (MI) are effective to sustain life; however, myocardial regeneration has not been achieved owing to the inherently poor regenerative capacity of the native myocardium. Stem cell-based therapies are promising; however, lineage specificity and undesired differentiation profile are challenging. Herein, we focused on the epicardial fat (EF) as an ideal source for mesenchymal stem cells (MSCs) owing to the proximity and same microvasculature with cardiac muscle. Unfortunately, the epicardial adipose tissue derived stem cells (EATDS) remain understudied regarding their phenotype heterogeneity and cardiac regeneration potential. As EF closely reflects the cardiac pathology during ischemia, the present study aims to determine the EATDS subpopulations under simulated ischemic and reperfused conditions employing single cell RNA sequencing (scRNAseq). EATDS were isolated from three hyperlipidemic Yucatan microswine and were divided into Control, Ischemia (ISC), and Ischemia/reperfusion (ISC/R). The scRNAseq analysis was performed using 10 genomics platform which revealed 18 unique cell clusters suggesting the existence of heterogeneous phenotypes. The upregulated genes were taken into consideration and subsequent functional assessment revealed the cardioprotective phenotypes with diverse mechanisms including epigenetic regulation (Cluster 1), myocardial homeostasis (Cluster 1), cell integrity and cell cycle (Clusters 2 and 3), prevention of fibroblast differentiation (Cluster 4), differentiation to myocardial lineage (Cluster 6), anti-inflammatory responses (Clusters 5, 8, and 11), prevention of ER-stress (Cluster 9), and increasing the energy metabolism (Cluster 10). These unique phenotypes of heterogeneous EATDS population open significant translational opportunities for myocardial regeneration and cardiac management.

A biomimetic hierarchical small intestinal submucosa-chitosan sponge/chitosan hydrogel scaffold with a micro/nano structure for dural repair

The dura mater is an essential barrier to protect the brain tissue and the dural defects caused by accidents can lead to serious complications. Various materials have been applied to dural repair, but it remains a challenge to perfectly match the structure and properties of the natural dura mater. Small intestinal submucosa has been developed for dural repair because of its excellent biocompatibility and biological activity, but its application is tremendously limited by the rapid degradation rate. Chitosan has also been broadly investigated in tissue repair, but the traditional chitosan hydrogels exhibit poor mechanical properties. A nanofiber chitosan hydrogel can be constructed based on an alkaline solvent, which is equipped with surprisingly high strength. Therefore, based on the bilayer structure of the natural dura mater, a biomimetic hierarchical small intestinal submucosa-chitosan sponge/chitosan hydrogel scaffold with a micro/nano structure was fabricated, which possessed a microporous structure in the upper sponge and a nanofiber structure in the lower hydrogel. The degradation rate was remarkably reduced compared with that of the small intestinal submucosa in the enzymatic degradation experiment in vitro. Meanwhile, the chitosan nanofibers brought high mechanical strength to the bilayer scaffold. Moreover, the hierarchical micro/nano structure and the active factors in the small intestinal submucosa have a fantastic effect on promoting the proliferation of fibroblasts and vascular endothelial cells. The bilayer scaffold showed good histocompatibility in the experiment of in vitro subcutaneous implantation in rats. Thus, the biomimetic hierarchical small intestinal submucosa-chitosan sponge/chitosan hydrogel scaffold with micro/nano structure simulates the structure of the natural dura mater and possesses properties with excellent performance, which has high practical value for dural repair.

Electrospun heparin-loaded nano-fiber sutures for the amelioration of achilles tendon rupture regeneration: in vivo evaluation

Peritendinous blood circulation improvement is a challenge to promote the healing of ruptured tendons in clinical treatment. Although electrospun membranes or scaffolds enable the reduction of complications such as adhesion, however, low efficiency, toxicity issues, the loss of biological activity, and complex electrospinning techniques are all bottlenecks of these systems. Improving the blood supply is crucial for their successful use, which involves promoting the metabolism and nutrient absorption in tendons. Here, a multifunctional, structurally simple strategy involving heparin-loaded sutures (PPH) that are clinically applicable is reported, in the form of electrospun core-shell nanofibers, with the ability to perform sustained release of anticoagulants heparin (verified in our previous publication) for the improvement of the healing of Achilles tendon. The morphology and diameter distribution of the collagen fiber in the PPH group are closely related to the health of the Achilles tendon than those of commercial sutures (CS). The in vivo results of the total collagen content and the expression of collagen type I in the PPH group are more than those of the CS group. After 6 weeks of culture, the tensile strength of the PPH group shows no significant difference compared to the healthy group. The data obtained in this study improves the current understanding on the regeneration of ruptured tendons and presents a promising strategy for clinical treatment.

Basic Research on Tendon Repair: Strategies, Evaluation, and Development

Tendon is a fibro-elastic structure that links muscle and bone. Tendon injury can be divided into two types, chronic and acute. Each type of injury or degeneration can cause substantial pain and the loss of tendon function. The natural healing process of tendon injury is complex. According to the anatomical position of tendon tissue, the clinical results are different. The wound healing process includes three overlapping stages: wound healing, proliferation and tissue remodeling. Besides, the healing tendon also faces a high re-tear rate. Faced with the above difficulties, management of tendon injuries remains a clinical problem and needs to be solved urgently. In recent years, there are many new directions and advances in tendon healing. This review introduces tendon injury and sums up the development of tendon healing in recent years, including gene therapy, stem cell therapy, Platelet-rich plasma (PRP) therapy, growth factor and drug therapy and tissue engineering. Although most of these therapies have not yet developed to mature clinical application stage, with the repeated verification by researchers and continuous optimization of curative effect, that day will not be too far away.

Advanced technology-driven therapeutic interventions for prevention of tendon adhesion: Design, intrinsic and extrinsic factor considerations

Tendon adhesion formation describes the development of fibrotic tissue between the tendon and its surrounding tissues, which commonly occurs as a reaction to injury or surgery. Its impact on function and quality of life varies from negligible to severely disabling, depending on the affected area and extent of adhesion formed. Thus far, treatment options remain limited with prophylactic anti-inflammatory medications and revision surgeries constituting the only tools within the doctors' armamentarium - neither of which provides reliable outcomes. In this review, the authors aim to collate the current understanding of the pathophysiological mechanisms underlying tendon adhesion formation, highlighting the significant role ascribed to the inflammatory cascade in accelerating adhesion formation. The bulk of this article will then be dedicated to critically appraising different therapeutic structures like nanoparticles, hydrogels and fibrous membranes fabricated by various cutting-edge technologies for adhesion formation prophylaxis. Emphasis will be placed on the role of the fibrous membranes, their ability to act as drug delivery vehicles as well as the combination with other therapeutic structures (e.g., hydrogel or nanoparticles) or fabrication technologies (e.g., weaving or braiding). Finally, the authors will provide an opinion as to the future direction of the prevention of tendon adhesion formation in view of scaffold structure and function designs.

Synthesis of PLA-poly(ether urethane)-PLA copolymers and design of biodegradable anti-adhesive membranes for orthopaedic applications

Peritendinous adhesions cause chronic pain and disability. Leading causes are trauma to tendons and surrounding tissues and immobilization after surgery. Adhesions occur between 24 hours to 6 weeks after surgery. Anti-adhesion barriers are currently the best option available to prevent peritendinous adhesions, but are ineffective and difficult to use. We developed an anti-adhesive membrane that can be easily applied during tendon surgery and effectively prevent adhesions. The membrane is based on a new triblock copolymer, is non-toxic, can be bio-eliminated, and has a degradation rate of more than 6 weeks for optimal anti-adhesion effect. We synthesized and characterized poly(ether urethane) (PEU) from poly(ethylene glycol). Triblock copolymers poly(lactic acid)-PEU-poly(lactic acid) (PLA-PEU-PLA) were then synthesized from PEU with PLA blocks of different lengths, and characterized. The membranes were shaped by hot molding and their mechanical properties, contact angle, water uptake, the kinetics of in vitro degradation and cytotoxicity were studied. Mechanical properties were developed according to the needs of orthopaedic surgeons. Results showed that membranes maintained their filmogenic integrity, have a degradation rate for optimal adhesion prevention, can be bioeliminated and biocompatible suggesting that they could be safely and effectively used as anti-adhesion orthopaedic devices. These results support the use of PLA-PEU-PLA membranes as a medical device, however, the effectiveness of the membranes in vivo needs to be further evaluated. A future study using an in vivo rat model of postoperative peritendinous adhesions is currently being developed.

Composite P(3HB-3HV)-CS Spheres for Enhanced Antibiotic Efficiency

Natural-derived biopolymers are suitable candidates for developing specific and selective performance-enhanced antimicrobial formulations. Composite polymeric particles based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and chitosan, P(3HB-3HV)-CS, are herein proposed as biocompatible and biodegradable delivery systems for bioproduced antibiotics: bacitracin (Bac), neomycin (Neo) and kanamycin (Kan). The stimuli-responsive spheres proved efficient platforms for boosting the antibiotic efficiency and antibacterial susceptibility, as evidenced against Gram-positive and Gram-negative strains. Absent or reduced proinflammatory effects were evidenced on macrophages in the case of Bac-/Neo- and Kan-loaded spheres, respectively. Moreover, these systems showed superior ability to sustain and promote the proliferation of dermal fibroblasts, as well as to preserve their ultrastructure (membrane and cytoskeleton integrity) and to exhibit anti-oxidant activity. The antibiotic-loaded P(3HB-3HV)-CS spheres proved efficient alternatives for antibacterial strategies.

Characterization of Tendon-Derived Stem Cells and Rescue Tendon Injury

The natural healing ability of tendon is limited, and it cannot restore the native structure and function of tendon injuries. Tendon-derived stem cells (TDSCs) are a new type of pluripotent stem cells with multi-directional differentiation potential and are expected to become a promising cell-seed for the treatment of tendon injuries in the future. In this review, we outline the latest advances in the culture and identification of TDSCs. In addition, the influencing factors on the differentiation of TDSCs are discussed. Moreover, we aim to discuss recent studies to enhance TDSCs treatment of injured tendons. Finally, we identify the limitations of the current understanding of TDSCs biology, the main challenges of using their use, and potential therapeutic strategies to inform cell-based tendon repair.

Ascorbic acid mitigates the deleterious effects of nicotine on tendon stem cells

Purpose: Nicotine causes tendon degeneration, whereas ascorbic acid imparts beneficial effects on tendon cells. Tendon stem cells (TSCs) play a vital role in maintaining tissue integrity and promoting restoration of structure and function after tendon injury. In the present study, cell culture experiments were performed to determine the effects of nicotine on TSCs and whether ascorbic acid supplementation could antagonize the action of high concentration nicotine. Methods: After treatment with nicotine and ascorbic acid, TSC proliferation, migration, stemness, apoptosis, and differentiation were analyzed. Results: TSC proliferation and expression of stem cell markers were significantly impaired by a high concentration of nicotine (1000 ng/mL), but a lower concentration (100 ng/mL) induced proliferative effects in TSCs. Moreover, the highest concentration of nicotine tested (1000 ng/mL) significantly inhibited the migratory ability of TSCs, while relatively high concentrations (100 and 1000 ng/mL) significantly (p < 0.05) up-regulated non-tenocyte genes. When ascorbic acid was added, the inhibitory effects of nicotine on the proliferation, migration, and stemness of TSCs were reversed. In addition, flow cytometry analysis showed that these nicotine concentrations could induce cell apoptosis, while the addition of ascorbic acid inhibited apoptosis. Conclusion: Addition of ascorbic acid partially reversed the inhibitory effect of a high concentration of nicotine. These findings indicate that while nicotine impairs the biological characteristics of TSCs, ascorbic acid can mitigate these deleterious effects and, therefore, may be useful for decreasing nicotine-induced tendon degeneration.

Current Advances on the Regeneration of Musculoskeletal Interfaces

The regeneration of the musculoskeletal system has been widely investigated. There is now detailed knowledge about the organs composing this system. Research has also investigated the zones between individual tissues where physical, mechanical, and biochemical properties transition. However, the understanding of the regeneration of musculoskeletal interfaces is still lacking behind. Numerous disorders and injuries can degrade or damage tissue interfaces. Their inability to regenerate can delay the tissue repair and regeneration process, leading to graft instability, high morbidity, and pain. Moreover, the knowledge of the mechanism of tissue interface development is not complete. This review presents an overview of the most recent approaches of the regeneration of musculoskeletal interfaces, including the latest in vitro, preclinical, and clinical studies. Impact statement Interfaces between soft and hard tissues are ubiquitous within the body. These transition zones are crucial for joint motion, stabilisation and load transfer between tissues, but do not seem to regenerate well after injury or deterioration. The knowledge about their biology is vast, but little is known about their development. Various musculoskeletal disorders in combination with risk factors including aging and unhealthy lifestyle, can lead to local imbalances, misalignments, inflammation, pain and restricted mobility. Our manuscript reviews the current approaches taken to promote the regeneration of musculoskeletal interfaces through in vitro, pre-clinical and clinical studies.

Tendon-Derived Biomimetic Surface Topographies Induce Phenotypic Maintenance of Tenocytes In Vitro

The tenocyte niche contains biochemical and biophysical signals that are needed for tendon homeostasis. The tenocyte phenotype is correlated with cell shape in vivo and in vitro, and shape-modifying cues are needed for tenocyte phenotypical maintenance. Indeed, cell shape changes from elongated to spread when cultured on a flat surface, and rat tenocytes lose the expression of phenotypical markers throughout five passages. We hypothesized that tendon gene expression can be preserved by culturing cells in the native tendon shape. To this end, we reproduced the tendon topographical landscape into tissue culture polystyrene, using imprinting technology. We confirmed that the imprints forced the cells into a more elongated shape, which correlated with the level of Scleraxis expression. When we cultured the tenocytes for 7 days on flat surfaces and tendon imprints, we observed a decline in tenogenic marker expression on flat but not on imprints. This research demonstrates that native tendon topography is an important factor contributing to the tenocyte phenotype. Tendon imprints therefore provide a powerful platform to explore the effect of instructive cues originating from native tendon topography on guiding cell shape, phenotype, and function of tendon-related cells.

Biomedical Implants for Regenerative Therapies

Regenerative therapies aim to develop novel treatments to restore tissue function. Several strategies have been investigated including the use of biomedical implants as three-dimensional artificial matrices to fill the defect side, to replace damaged tissues or for drug delivery. Bioactive implants are used to provide growth environments for tissue formation for a variety of applications including nerve, lung, skin and orthopaedic tissues. Implants can either be biodegradable or non-degradable, should be nontoxic and biocompatible, and should not trigger an immunological response. Implants can be designed to provide suitable surface area-to-volume ratios, ranges of porosities, pore interconnectivities and adequate mechanical strengths. Due to their broad range of properties, numerous biomaterials have been used for implant manufacture. To enhance an implant’s bioactivity, materials can be functionalised in several ways, including surface modification using proteins, incorporation of bioactive drugs, growth factors and/or cells. These strategies have been employed to create local bioactive microenvironments to direct cellular responses and to promote tissue regeneration and controlled drug release. This chapter provides an overview of current bioactive biomedical implants, their fabrication and applications, as well as implant materials used in drug delivery and tissue regeneration. Additionally, cell- and drug-based bioactivity, manufacturing considerations and future trends will be discussed.

In Vitro Innovation of Tendon Tissue Engineering Strategies

Tendinopathy is the term used to refer to tendon disorders. Spontaneous adult tendon healing results in scar tissue formation and fibrosis with suboptimal biomechanical properties, often resulting in poor and painful mobility. The biomechanical properties of the tissue are negatively affected. Adult tendons have a limited natural healing capacity, and often respond poorly to current treatments that frequently are focused on exercise, drug delivery, and surgical procedures. Therefore, it is of great importance to identify key molecular and cellular processes involved in the progression of tendinopathies to develop effective therapeutic strategies and drive the tissue toward regeneration. To treat tendon diseases and support tendon regeneration, cell-based therapy as well as tissue engineering approaches are considered options, though none can yet be considered conclusive in their reproduction of a safe and successful long-term solution for full microarchitecture and biomechanical tissue recovery. In vitro differentiation techniques are not yet fully validated. This review aims to compare different available tendon in vitro differentiation strategies to clarify the state of art regarding the differentiation process.

Improving the regenerative microenvironment during tendon healing by using nanostructured fibrin/agarose-based hydrogels in a rat Achilles tendon injury model

AIMS

Achilles tendon injuries are a frequent problem in orthopaedic surgery due to their limited healing capacity and the controversy surrounding surgical treatment. In recent years, tissue engineering research has focused on the development of biomaterials to improve this healing process. The aim of this study was to analyze the effect of tendon augmentation with a nanostructured fibrin-agarose hydrogel (NFAH) or genipin cross-linked nanostructured fibrin-agarose hydrogel (GP-NFAH), on the healing process of the Achilles tendon in rats.

METHODS

NFAH, GP-NFAH, and MatriDerm (control) scaffolds were generated (five in each group). A biomechanical and cell-biomaterial-interaction characterization of these biomaterials was then performed: Live/Dead Cell Viability Assay, water-soluble tetrazolium salt-1 (WST-1) assay, and DNA-released after 48 hours. Additionally, a complete section of the left Achilles tendon was made in 24 Wistar rats. Animals were separated into four treatment groups (six in each group): direct repair (Control), tendon repair with MatriDerm, or NFAH, or GP-NFAH. Animals were euthanized for further histological analyses after four or eight weeks post-surgery. The Achilles tendons were harvested and a histopathological analysis was performed.

RESULTS

Tensile test revealed that NFAH and GP-NFAH had significantly higher overall biomechanical properties compared with MatriDerm. Moreover, biological studies confirmed a high cell viability in all biomaterials, especially in NFAH. In addition, in vivo evaluation of repaired tendons using biomaterials (NFAH, GP-NFAH, and MatriDerm) resulted in better organization of the collagen fibres and cell alignment without clinical complications than direct repair, with a better histological score in GP-NFAH.

CONCLUSION

In this animal model we demonstrated that NFAH and GP-NFAH had the potential to improve tendon healing following a surgical repair. However, future studies are needed to determine the clinical usefulness of these engineered strategies. Cite this article: Bone Joint J 2020;102-B(8):1095-1106.

Injectable hydrogels for tendon and ligament tissue engineering

The problem of tendon and ligament (T/L) regeneration in musculoskeletal diseases has long constituted a major challenge. In situ injection of formable biodegradable hydrogels, however, has been demonstrated to treat T/L injury and reduce patient suffering in a minimally invasive manner. An injectable hydrogel is more suitable than other biological materials due to the special physiological structure of T/L. Most other materials utilized to repair T/L are cell-based, growth factor-based materials, with few material properties. In addition, the mechanical property of the gel cannot reach the normal T/L level. This review summarizes advances in natural and synthetic polymeric injectable hydrogels for tissue engineering in T/L and presents prospects for injectable and biodegradable hydrogels for its treatment. In future T/L applications, it is necessary develop an injectable hydrogel with mechanics, tissue damage-specific binding, and disease response. Simultaneously, the advantages of various biological materials must be combined in order to achieve personalized precision therapy.

Generation of Core-Sheath Polymer Nanofibers by Pressurised Gyration

The ability to generate core-sheath bicomponent polymer nanofibers in a single-step with scale-up possibilities is demonstrated using pressurised gyration manufacturing. This is the first time that nanofiber containing more than one polymer having a core-sheath configuration has been generated in this way. Water-soluble polymers polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) are used as the core and sheath layers, respectively. Core-sheath nanofibers with a diameter in the range of 331 to 998 nm were spun using 15 wt % PEO and 15 wt % PVP polymer solutions. The forming parameters, working pressure and rotating speed, had a significant influence on the size, size distribution and the surface morphology of the nanofibers generated. Overall, fibre size decreased with increasing working pressure and rotating speed. The fibre size was normally distributed in all cases, with 0.2 MPa working pressure in particular showing narrower distribution. The fibre size distributions for 0.1 and 0.3 MPa working pressure were broader and a mean fibre size of 331 nm was obtained in the latter case. The fibre size was evenly distributed and narrower for rotating speeds of 2000 and 4000 RPMs. The distribution was broader for rotating speed of 6000 RPM with a mean value obtained at 430 nm. Continuous, smooth and bead-free fibre morphologies were obtained in each case. The fibre cross-section analysis using a focused ion beam machine showed a solid core surrounded by a sheath layer. Our findings demonstrate that the pressurised gyration could be used to produce core-sheath polymer nanofibers reliably and cost-effectively with scale-up possibilities (~4 kg h-1).

Mesenchymal Stem Cells Seeded Decellularized Tendon Scaffold for Tissue Engineering

Tendon is a collagenous tissue to connect bone and muscle. Healing of damaged/injured tendon is the primary clinical challenge in musculoskeletal regeneration because they often react poorly to treatment. Tissue engineering (a triad strategy of scaffolds, cells and growth factors) may have the potential to improve the quality of tendon tissue healing under such impaired situations. Tendon tissue engineering aims to synthesize graft alternatives to repair the injured tendon. Biological scaffolds derived from decellularized tissue may be a better option as their biomechanical properties are similar to the native tissue. This review is designed to provide background information on the current challenges in curing torn/worn out the tendon and the clinical relevance of decellularized scaffolds for such applications.

Evaluation of a new collagen-based medical device (ElastiCo®) for the treatment of acute Achilles tendon injury and prevention of peritendinous adhesions: An in vitro biocompatibility and in vivo investigation

Tendon healing still represents a challenge for clinicians because it is slow and incomplete. The most injured is the Achilles tendon, and surgery is the therapeutic strategy often adopted because it provides a quicker functional recovery. Peritendinous adhesions are the main complication of surgery with hyperplasia and chemotaxis of fibroblasts. A biomaterial that blocks fibroblast migration, without interfering with the passage of cytokines and growth factors, might be useful. The present study evaluated the biocompatibility of a new Type I collagen-based scaffold (ElastiCo®) and its ability to promote Achilles tendon healing, inhibiting adhesion formation. After verifying in vitro biocompatibility, physical, and mechanical properties of the scaffold, an in vivo study was performed in 28 rats, operated to induce an acute lesion in both Achilles tendons. One tendon was treated with the suture only and the contralateral one with suture wrapped with ElastiCo® film. After 8 and 16 weeks, it was observed that ElastiCo® reduced internal and external peritendinous adhesions and Collagen III content and increased Collagen I. Elastic modulus increased with both treatments over time. Current results highlighted the clinical translationality of ElastiCo® that could improve the quality of life in patients affected by Achilles tendon lesions surgically treated.

Role of Biomaterials and Controlled Architecture on Tendon/Ligament Repair and Regeneration

Engineering synthetic scaffolds to repair and regenerate ruptured native tendon and ligament (T/L) tissues is a significant engineering challenge due to the need to satisfy both the unique biological and biomechanical properties of these tissues. Long-term clinical outcomes of synthetic scaffolds relying solely on high uniaxial tensile strength are poor with high rates of implant rupture and synovitis. Ideal biomaterials for T/L repair and regeneration need to possess the appropriate biological and biomechanical properties necessary for the successful repair and regeneration of ruptured tendon and ligament tissues.

Bioactive LbL-assembled multilayer nanofilms upregulate tenogenesis and angiogenesis enabling robust healing of degenerative rotator cuff tendons in vivo

Degenerative changes to rotator cuff tendons are often diagnosed in elderly patients. Spontaneous healing of degenerative tendons is rather inefficient as a result of the lack of a suitable microenvironment for tendon stem cell differentiation and vascularization. Herein, multilayer hyaluronic acid/chitosan (HA/CS) nanofilms were assembled by a layer-by-layer assembly method onto aligned poly(ε-caprolactone) (PCL) nanofibers for use in healing degenerative tendons. Materials testing showed that the number of layers of HA/CS nanofilms could adjust the hydrophilicity and wettability of the nanofibrous membranes. In vitro, the optimal 8-layer (termed as 8LP) membrane afforded aligned morphology of tendon stem/progenitor cells (TSPCs) and up-regulated mRNA expression of tenogenic markers (SCX, BGN). In a rabbit model with disorganized rotator cuff tendons, the 8LP group up-regulated mRNA levels of collagen I/III and tenascin (TNC) at 6 weeks, but not 12 weeks, post-surgery as compared to the native PCL group. Next, vascular endothelial growth factor-loaded 8LP (termed as 8LP-V) was prepared. Compared to 8LP, 8LP-V produced higher levels of angiogenesis in the tendons at 6 or 12 weeks post-surgery, thus supplying endogenous pre-tendon growth factors (TGF-β, IGF-1) to further enhance tenogenic transcriptional factors. As a result, 8LP-V yielded thicker collagen fibers and/or higher tendon stiffness as compared to the 8LP and clinical pericardial patch groups. This study highlights the rational design of LbL-assembled multilayer HA/CS films to upregulate tenogenesis for robust healing of degenerative rotator cuff tendons.

Nanocomposite Films of Chitosan-Grafted Carbon Nano-Onions for Biomedical Applications

The design of scaffolding from biocompatible and resistant materials such as carbon nanomaterials and biopolymers has become very important, given the high rate of injured patients. Graphene and carbon nanotubes, for example, have been used to improve the physical, mechanical, and biological properties of different materials and devices. In this work, we report the grafting of carbon nano-onions with chitosan (CS-g-CNO) through an amide-type bond. These compounds were blended with chitosan and polyvinyl alcohol composites to produce films for subdermal implantation in Wistar rats. Films with physical mixture between chitosan, polyvinyl alcohol, and carbon nano-onions were also prepared for comparison purposes. Film characterization was performed with Fourier Transformation Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Tensile strength, X-ray Diffraction Spectroscopy (XRD), and Scanning Electron Microscopy (SEM). The degradation of films into simulated body fluid (SBF) showed losses between 14% and 16% of the initial weight after 25 days of treatment. Still, a faster degradation (weight loss and pH changes) was obtained with composites of CS-g-CNO due to a higher SBF interaction by hydrogen bonding. On the other hand, in vivo evaluation of nanocomposites during 30 days in Wistar rats, subdermal tissue demonstrated normal resorption of the materials with lower inflammation processes as compared with the physical blends of ox-CNO formulations. SBF hydrolytic results agreed with the in vivo degradation for all samples, demonstrating that with a higher ox-CNO content increased the stability of the material and decreased its degradation capacity; however, we observed greater reabsorption with the formulations including CS-g-CNO. With this research, we demonstrated the future impact of CS/PVA/CS-g-CNO nanocomposite films for biomedical applications.

Tendon and Ligament Healing and Current Approaches to Tendon and Ligament Regeneration

Ligament and tendon injuries are common problems in orthopedics. There is a need for treatments that can expedite nonoperative healing or improve the efficacy of surgical repair or reconstruction of ligaments and tendons. Successful biologically-based attempts at repair and reconstruction would require a thorough understanding of normal tendon and ligament healing. The inflammatory, proliferative, and remodeling phases, and the cells involved in tendon and ligament healing will be reviewed. Then, current research efforts focusing on biologically-based treatments of ligament and tendon injuries will be summarized, with a focus on stem cells endogenous to tendons and ligaments. Statement of clinical significance: This paper details mechanisms of ligament and tendon healing, as well as attempts to apply stem cells to ligament and tendon healing. Understanding of these topics could lead to more efficacious therapies to treat ligament and tendon injuries. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:7-12, 2020.

Three-Dimensional High-Porosity Chitosan/Honeycomb Porous Carbon/Hydroxyapatite Scaffold with Enhanced Osteoinductivity for Bone Regeneration

Three-dimensional honeycomb porous carbon (HPC) has attracted increasing attention in bioengineering due to excellent mechanical properties and a high surface-to-volume ratio. In this paper, a three-dimensional chitosan (CS)/honeycomb porous carbon/hydroxyapatite composite was prepared by nano-sized hydroxyapatite (nHA) on the HPC surface in situ deposition, dissolved in chitosan solution, and vacuum freeze-dried. The structure and composition of CS/HPC/nHA were characterized by scanning electron microscopy, transmission electron miscroscopy, Fourier transform infrared, and X-ray photoelectron spectroscopy, and the porosity, swelling ratio, and mechanical properties of the scaffold were also tested. The as-prepared scaffolds possess hierarchical pores and organic-inorganic components, which are similar in composition and structure to bone tissues. The synthesized composite scaffold has high porosity and a certain mechanical strength. By culturing mouse bone marrow mesenchymal stem cells on the surface of the scaffold, it was confirmed that the scaffold facilitated its growth and promoted its differentiation into the osteogenesis direction. In vivo experiments further demonstrate that the CS/HPC/nHA composite scaffold has a significant advantage in promoting bone formation in the bone defect area. All the results suggested that the CS/HPC/nHA scaffolds have great application prospect in bone tissue engineering.