The multiscale structural and mechanical effects of mouse supraspinatus muscle unloading on the mature enthesis

Quantification of 3D microstructures in Achilles tendons during in situ loading reveals anisotropic fiber response

While the number of studies investigating Achilles tendon pathologies has grown exponentially, more research is needed to gain a better understanding of the complex relation between its hierarchical structure, mechanical response, and failure. At the microscale, collagen fibers are, with some degree of dispersion, primarily aligned along the principal loading direction. However, during tension, rearrangements and reorientations of these fibers are believed to occur. As 3D micro-movements are hard to capture, the precise nature of this fiber reorganization remains unknown. This study aimed to visualize and quantify the intricate fiber changes occurring within rat Achilles tendons under tension. Rat tendons were in situ loaded with concurrent synchrotron phase contrast microCT imaging. The results are heterogenous and show that collagen fibers' response to loading is nonuniform and depends on anatomical orientation. Furthermore, damage propagation could be visualized, revealing that in the presence of heterotopic ossification, damage proceeds within the ossified deposits rather than at the interface between hard and soft tissues. Our approach could effectively capture the microstructural changes occurring during loading and shows promise in understanding the relation between microstructure and mechanical response for ex-vivo Achilles tendons and other biological tissues. STATEMENT OF SIGNIFICANCE: Achilles tendons endure high mechanical loads during daily motion and physical activities. Understanding the structural and mechanical responses of Achilles tendons to such loads is vital for elucidating their function in health and pathology. We have combined the use of synchrotron phase contrast microCT with in situ mechanical loading to contribute to a better understanding of the relation between microstructural response and organ scale mechanical properties. The proposed methodology will be valuable for future research into the interplay between structure, mechanics, and pathology of tendons, and for the development of more effective strategies to preserve tendon function and possibly mitigating musculoskeletal disorders.

Humanlike manual activities in Australopithecus

The evolution of the human hand is a topic of great interest in paleoanthropology. As the hand can be involved in a vast array of activities, knowledge regarding how it was used by early hominins can yield crucial information on the factors driving biocultural evolution. Previous research on early hominin hands focused on the overall bone shape. However, while such approaches can inform on mechanical abilities and the evolved efficiency of manipulation, they cannot be used as a definite proxy for individual habitual activity. Accordingly, it is crucial to examine bone structures more responsive to lifetime biomechanical loading, such as muscle attachment sites or internal bone architecture. In this study, we investigate the manual entheseal patterns of Australopithecus afarensis, Australopithecus africanus, and Australopithecus sediba through the application of the validated entheses-based reconstruction of activity method. Using a comparative sample of later Homo and three great ape genera, we analyze the muscle attachment site proportions on the thumb, fifth ray, and third intermediate phalanx to gain insight into the habitual hand use of Australopithecus. We use a novel statistical procedure to account for the effects of interspecies variation in overall size and ray proportions. Our results highlight the importance of certain muscles of the first and fifth digits for humanlike hand use. In humans, these muscles are required for variable in-hand manipulation and are activated during stone-tool production. The entheses of A. sediba suggest muscle activation patterns consistent with a similar suite of habitual manual activities as in later Homo. In contrast, A. africanus and A. afarensis display a mosaic entheseal pattern that combines indications of both humanlike and apelike manipulation. Overall, these findings provide new evidence that some australopith species were already habitually engaging in humanlike manipulation, even if their manual dexterity was likely not as high as in later Homo.

Leveraging in vivo animal models of tendon loading to inform tissue engineering approaches

Tendon injuries disrupt successful transmission of force between muscle and bone, resulting in reduced mobility, increased pain, and significantly reduced quality of life for affected patients. There are currently no targeted treatments to improve tendon healing beyond conservative methods such as rest and physical therapy. Tissue engineering approaches hold great promise for designing instructive biomaterials that could improve tendon healing or for generating replacement graft tissue. More recently, engineered microphysiological systems to model tendon injuries have been used to identify therapeutic targets. Despite these advances, current tissue engineering efforts that aim to regenerate, replace, or model injured tendons have largely failed due in large part to a lack of understanding of how the mechanical environment of the tendon influences tissue homeostasis and how altered mechanical loading can promote or prevent disease progression. This review article draws inspiration from what is known about tendon loading from in vivo animal models and identifies key metrics that can be used to benchmark success in tissue engineering applications. Finally, we highlight important challenges and opportunities for the field of tendon tissue engineering that should be taken into consideration in designing engineered platforms to understand or improve tendon healing.

Compositional, Structural, and Biomechanical Properties of Three Different Soft Tissue-Hard Tissue Insertions: A Comparative Review

Connective tissue attaches to bone across an insertion with spatial gradients in components, microstructure, and biomechanics. Due to regional stress concentrations between two mechanically dissimilar materials, the insertion is vulnerable to mechanical damage during joint movements and difficult to repair completely, which remains a significant clinical challenge. Despite interface stress concentrations, the native insertion physiologically functions as the effective load-transfer device between soft tissue and bone. This review summarizes tendon, ligament, and meniscus insertions cross-sectionally, which is novel in this field. Herein, the similarities and differences between the three kinds of insertions in terms of components, microstructure, and biomechanics are compared in great detail. This review begins with describing the basic components existing in the four zones (original soft tissue, uncalcified fibrocartilage, calcified fibrocartilage, and bone) of each kind of insertion, respectively. It then discusses the microstructure constructed from collagen, glycosaminoglycans (GAGs), minerals and others, which provides key support for the biomechanical properties and affects its physiological functions. Finally, the review continues by describing variations in mechanical properties at the millimeter, micrometer, and nanometer scale, which minimize stress concentrations and control stretch at the insertion. In summary, investigating the contrasts between the three has enlightening significance for future directions of repair strategies of insertion diseases and for bioinspired approaches to effective soft-hard interfaces and other tough and robust materials in medicine and engineering.

Characterization of the mechanical properties of the mouse Achilles tendon enthesis by microindentation. Effects of unloading and subsequent reloading

The fibrocartilaginous tendon enthesis, i.e. the site where a tendon is attached to bone through a fibrocartilaginous tissue, is considered as a functionally graded interface. However, at local scale, a very limited number of studies have characterized micromechanical properties of this transitional tissue. The first goal of this work was to characterize the micromechanical properties of the mineralized part of the healthy Achilles tendon enthesis (ATE) through microindentation testing and to assess the degree of mineralization and of carbonation of mineral crystals by Raman spectroscopy. Since little is known about enthesis biological plasticity, our second objective was to examine the effects of unloading and reloading, using a mouse hindlimb-unloading model, on both the micromechanical properties and the mineral phase of the ATE. Elastic modulus, hardness, degree of mineralization, and degree of carbonation were assessed after 14 days of hindlimb suspension and again after a subsequent 6 days of reloading. The elastic modulus gradually increased along the mineralized part of the ATE from the tidemark to the subchondral bone, with the same trend being found for hardness. Whereas the degree of carbonation did not differ according to zone of measurement, the degree of mineralization increased by >70 % from tidemark to subchondral bone. Thus, the gradient in micromechanical properties is in part explained by a mineralization gradient. A 14-day unloading period did not appear to affect the gradient of micromechanical properties of the ATE, nor the degree of mineralization or carbonation. However, contrary to a short period of unloading, early return to normal mechanical load reduced the micromechanical properties gradient, regardless of carbonate-to-phosphate ratios, likely due to the more homogeneous degree of mineralization. These findings provide valuable data not only for tissue bioengineering, but also for musculoskeletal clinical studies and microgravity studies focusing on long-term space travel by astronauts.

Acidosis induces significant changes to the murine supraspinatus enthesis organic matrix

Rotator cuff pathology is a common musculoskeletal condition that disproportionately affects older adults, as well as patients with diabetes mellitus and chronic kidney disease. It is known that increased age and kidney dysfunction have been correlated to acidotic states, which may be related to the increased incidence of rotator cuff injury. In order to investigate the potential relationship between acidosis and rotator cuff composition and mechanics, this study utilizes a 14-day murine model of metabolic acidosis and examines the effects on the supraspinatus tendon-humeral head attachment complex. The elastic matrix in the enthesis exhibited significant changes beginning at day 3 of acidosis exposure. At day 3 and day 7 timepoints, there was a decrease in collagen content seen in both mineralized and unmineralized tissue as well as a decrease in mineral:matrix ratio. There is also evidence of both mineral dissolution and reprecipitation as buffering ions continually promote pH homeostasis. Mechanical properties of the tendon-to-bone attachment were studied; however, no significant changes were elicited in this 14-day model of acidosis. These findings suggest that acidosis can result in significant changes in enthesis composition over the course of 14 days; however, enthesis mechanics may be more structurally mediated rather than affected by compositional changes.

Entheseal changes and activity patterns in southern African hunter-gatherer/herders from the Holocene

OBJECTIVES

Activity patterns and lifeways in southern African hunter-gatherer/herders (sAHGH) during the Holocene were dynamic, with subsistence activities and mobility varying through space and time. In this study, spatial and temporal variations in entheseal changes (ECs) are assessed as physical activity markers in sAHGH from the Holocene.

METHODS

The Coimbra method was used to assess fibrocartilaginous ECs in the upper and lower limbs of 118 sAHGH from the Holocene. Descriptive statistics and generalized estimating equations were used to explore the association between ECs, sex, age, ecological biomes, and temporality.

RESULTS

A total of 118 individuals were sampled, comprising 67 males, and 42 females, mostly from the fynbos (59/118), forest (30/118) and succulent karoo biomes (16/118). ECs were identified in 94% of the sample. Interobserver scoring suggests our findings are likely to underrepresent the extent of EC score differences in sAHGH. Findings indicate a complex pattern of physical activity in sAHGH with differences attributable to regional ecology rather than age or sex. More prominent ECs were identified in individuals from the forest biome, relative to the fynbos and succulent karoo biomes. These were consistent with resource search and processing costs, and terrain differences in these ecozones. ECs were only detected temporally relative to the infiltration of pastoralism (at 2000 BP) when the data were stratified by ecological biome.

DISCUSSION

This study provides evidence that regional ecology plays a central role in driving activity patterns regardless of social or cultural organization. Ecological biomes provide a gradient along which the temporal impact of resource limitations on human biology, activity patterns and sociocultural behaviors can be studied.

Hedgehog Activation for Enhanced Rotator Cuff Tendon-to-Bone Healing

BACKGROUND

Rotator cuff repair is a common orthopaedic procedure, yet the rate of failure to heal after surgery is high. Repair site rupture is due to poor tendon-to-bone healing and lack of regeneration of the native fibrocartilaginous enthesis. During development, the enthesis is formed and mineralized by a pool of progenitors activated by hedgehog signaling. Furthermore, hedgehog signaling drives regenerative enthesis healing in young animals, in contrast to older animals, in which enthesis injuries heal via fibrovascular scar and without participation of hedgehog signaling.

HYPOTHESIS

Hedgehog activation improves tendon-to-bone healing in an animal model of rotator cuff repair.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 78 adult Sprague-Dawley rats were used. Supraspinatus tendon injury and repair were completed bilaterally, with microsphere-encapsulated hedgehog agonist administered to right shoulders and control microspheres administered to left shoulders. Animals were sacrificed after 3, 14, 28, or 56 days. Gene expression and histological, biomechanical, and bone morphometric analyses were conducted.

RESULTS

At 3 days, hedgehog signaling pathway genes Gli1 (1.70; P = .029) and Smo (2.06; P = .0173), as well as Runx2 (1.69; P = .0386), a transcription factor of osteogenesis, were upregulated in treated relative to control repairs. At 14 days, transcription factors of tenogenesis, Scx (4.00; P = .041), and chondrogenesis, Sox9 (2.95; P = .010), and mineralized fibrocartilage genes Col2 (3.18; P = .031) and Colx (1.85; P = .006), were upregulated in treated relative to control repairs. Treatment promoted fibrocartilage formation at the healing interface by 28 days, with improvements in tendon-bone maturity, organization, and continuity. Treatment led to improved biomechanical properties. The material property strength (2.43 vs 1.89 N/m2; P = .046) and the structural property work to failure (29.01 vs 18.09 mJ; P = .030) were increased in treated relative to control repairs at 28 days and 56 days, respectively. Treatment had a marginal effect on bone morphometry underlying the repair. Trabecular thickness (0.08 vs 0.07 mm; P = .035) was increased at 28 days.

CONCLUSION

Hedgehog agonist treatment activated hedgehog signaling at the tendon-to-bone repair site and prompted increased mineralized fibrocartilage production. This extracellular matrix production and mineralization resulted in improved biomechanical properties, demonstrating the therapeutic potential of hedgehog agonism for improving tendon-to-bone healing after rotator cuff repair.

CLINICAL RELEVANCE

This study demonstrates the therapeutic potential of hedgehog agonist treatment for improving tendon-to-bone healing after rotator cuff injury and repair.

Guidelines for ex vivo mechanical testing of tendon

Tendons are critical for the biomechanical function of joints. Tendons connect muscles to bones and allow for the transmission of muscle forces to facilitate joint motion. Therefore, characterizing the tensile mechanical properties of tendons is important for the assessment of functional tendon health and efficacy of treatments for acute and chronic injuries. In this guidelines paper, we review methodological considerations, testing protocols, and key outcome measures for mechanical testing of tendons. The goal of the paper is to present a simple set of guidelines to the nonexpert seeking to perform tendon mechanical tests. The suggested approaches provide rigorous and consistent methodologies for standardized biomechanical characterization of tendon and reporting requirements across laboratories.

Multivariate assessments of activity-related skeletal changes: Interpreting Bell Beaker specialized male archery and social organization in Central Europe

OBJECTIVES

The Bell Beaker period witnessed the rise of individual inhumations with "wealthy" burial contexts containing archery-related grave goods, leading archaeologists to label the individuals in these tombs as "archers." This study looks to (1) compare the skeletons from male "archer" burials with those from male "non-archer" burials-those not having archery-related grave goods-in order to assess a possible link between burial context and physical activity, and (2) apply a biomechanics profile to evaluate whether the individuals associated with these "archer" burials practiced specialized archer activity.

MATERIALS AND METHODS

The corpus (males only) included 46 "archers" and 40 "non-archers" from Bell Beaker individual inhumations. Osteological data included measurements, scores of entheseal changes, and a diagnosis of certain pathologies. Data analyses involved visual observations, hypothesis tests, dimension reduction, and MANOVA, with approaches aimed at exploring the treatment of data missingness.

RESULTS

Measurement data revealed no differences between the two groups. Evaluations of entheseal changes found that "non-archers" had consistently more instances of bone surface modifications than "archers." Individual assessments of specialized archer occupation identified 11 possible specialized archers.

DISCUSSION

These findings indicate a possible labor differentiation represented through the presence of a probably prestigious "archer" burial context. This suggests a link between grave good presence and labor, but not between a Bell Beaker archery occupation and an "archer" burial context. Data analyses support the application of biomechanics to osteological analyses in order to assess specialized activity on the skeleton.

Structural and functional heterogeneity of mineralized fibrocartilage at the Achilles tendon-bone insertion

A demanding task of the musculoskeletal system is the attachment of tendon to bone at entheses. This region often presents a thin layer of fibrocartilage (FC), mineralized close to the bone and unmineralized close to the tendon. Mineralized FC deserves increased attention, owing to its crucial anchoring task and involvement in enthesis pathologies. Here, we analyzed mineralized FC and subchondral bone at the Achilles tendon-bone insertion of rats. This location features enthesis FC anchoring tendon to bone and sustaining tensile loads, and periosteal FC facilitating bone-tendon sliding with accompanying compressive and shear forces. Using a correlative multimodal investigation, we evaluated potential specificities in mineral content, fiber organization and mechanical properties of enthesis and periosteal FC. Both tissues had a lower degree of mineralization than subchondral bone, yet used the available mineral very efficiently: for the same local mineral content, they had higher stiffness and hardness than bone. We found that enthesis FC was characterized by highly aligned mineralized collagen fibers even far away from the attachment region, whereas periosteal FC had a rich variety of fiber arrangements. Except for an initial steep spatial gradient between unmineralized and mineralized FC, local mechanical properties were surprisingly uniform inside enthesis FC while a modulation in stiffness, independent from mineral content, was observed in periosteal FC. We interpreted these different structure-property relationships as a demonstration of the high versatility of FC, providing high strength at the insertion (to resist tensile loading) and a gradual compliance at the periosteal surface (to resist contact stresses). STATEMENT OF SIGNIFICANCE: Mineralized fibrocartilage (FC) at entheses facilitates the integration of tendon in bone, two strongly dissimilar tissues. We focus on the structure-function relationships of two types of mineralized FC, enthesis and periosteal, which have clearly distinct mechanical demands. By investigating them with multiple high-resolution methods in a correlative manner, we demonstrate differences in fiber architecture and mechanical properties between the two tissues, indicative of their mechanical roles. Our results are relevant both from a medical viewpoint, targeting a clinically relevant location, as well as from a material science perspective, identifying FC as high-performance versatile composite.

Effect of stress on the dissolution/crystallization of apatite in aqueous solution: a thermochemical equilibrium study

Bone mineralization is critical to maintaining tissue mechanical function. The application of mechanical stress via exercise promotes bone mineralization via cellular mechanotransduction and increased fluid transport through the collagen matrix. However, due to its complex composition and ability to exchange ions with the surrounding body fluids, bone mineral composition and crystallization is also expected to respond to stress. Here, a combination of data from materials simulations, namely density functional theory and molecular dynamics, and experimental studies were input into an equilibrium thermodynamic model of bone apatite under stress in an aqueous solution based on the theory of thermochemical equilibrium of stressed solids. The model indicated that increasing uniaxial stress induced mineral crystallization. This was accompanied by a decrease in calcium and carbonate integration into the apatite solid. These results suggest that weight-bearing exercises can increase tissue mineralization via interactions between bone mineral and body fluid independent of cell and matrix behaviours, thus providing another mechanism by which exercise can improve bone health. This article is part of a discussion meeting issue 'Supercomputing simulations of advanced materials'.

TGF-β1 derived from macrophages contributes to load-induced tendon-bone healing in the murine rotator cuff repair model by promoting chondrogenesis

It has been established that mechanical stimulation benefits tendon-bone (T-B) healing, and macrophage phenotype can be regulated by mechanical cues; moreover, the interaction between macrophages and mesenchymal stem cells (MSCs) plays a fundamental role in tissue repair. This study aimed to investigate the role of macrophage-mediated MSC chondrogenesis in load-induced T-B healing in depth. C57BL/6 mice rotator cuff (RC) repair model was established to explore the effects of mechanical stimulation on macrophage polarization, transforming growth factor (TGF)-β1 generation, and MSC chondrogenesis within T-B enthesis by immunofluorescence and enzyme-linked immunosorbent assay (ELISA). Macrophage depletion was performed by clodronate liposomes, and T-B healing quality was evaluated by histology and biomechanics. In vitro, bone marrow-derived macrophages (BMDMs) were stretched with CELLOAD-300 load system and macrophage polarization was identified by flow cytometry and quantitative real-time polymerase chain reaction (qRT-PCR). MSC chondrogenic differentiation was measured by histochemical analysis and qRT-PCR. ELISA and qRT-PCR were performed to screen the candidate molecules that mediated the pro-chondrogenic function of mechanical stimulated BMDMs. Mechanical stimulation promoted macrophage M2 polarization in vivo and in vitro. The conditioned media from mechanically stimulated BMDMs (MS-CM) enhanced MSC chondrogenic differentiation, and mechanically stimulated BMDMs generated more TGF-β1. Further, neutralizing TGF-β1 in MS-CM can attenuate its pro-chondrogenic effect. In vivo, mechanical stimulation promoted TGF-β1 generation, MSC chondrogenesis, and T-B healing, which were abolished following macrophage depletion. Macrophages subjected to appropriate mechanical stimulation could polarize toward the M2 phenotype and secrete TGF-β1 to promote MSC chondrogenesis, which subsequently augments T-B healing.

D-Mannose prevents bone loss under weightlessness

BACKGROUND

Astronauts undergo significant microgravity-induced bone loss during space missions, which has become one of the three major medical problems hindering human's long-term space flight. A risk-free and antiresorptive drug is urgently needed to prevent bone loss during space missions. D-mannose is a natural C-2 epimer of D-glucose and is abundant in cranberries. This study aimed to investigate the protective effects and potential mechanisms of D-mannose against bone loss under weightlessness.

METHODS

The hind legs of tail-suspended (TS) rats were used to mimic weightlessness on Earth. Rats were administered D-mannose intragastrically. The osteoclastogenic and osteogenic capacity of D-mannose in vitro and in vivo was analyzed by micro-computed tomography, biomechanical assessment, bone histology, serum markers of bone metabolism, cell proliferation assay, quantitative polymerase chain reaction, and western blotting. RNA-seq transcriptomic analysis was performed to detect the underlying mechanisms of D-mannose in bone protection.

RESULTS

The TS rats showed lower bone mineral density (BMD) and poorer bone morphological indices. D-mannose could improve BMD in TS rats. D-mannose inhibited osteoclast proliferation and fusion in vitro, without apparent effects on osteoblasts. RNA-seq transcriptomic analysis showed that D-mannose administration significantly inhibited the cell fusion molecule dendritic cell-specific transmembrane protein (DC-STAMP) and two indispensable transcription factors for osteoclast fusion (c-Fos and nuclear factor of activated T cells 1 [NFATc1]). Finally, TS rats tended to experience dysuria-related urinary tract infections (UTIs), which were suppressed by treatment with D-mannose.

CONCLUSION

D-mannose protected against bone loss and UTIs in rats under weightlessness. The bone protective effects of D-mannose were mediated by inhibiting osteoclast cell fusion. Our findings provide a potential strategy to protect against bone loss and UTIs during space missions.

Rational Design of Soft-Hard Interfaces through Bioinspired Engineering

Soft-hard tissue interfaces in nature present a diversity of hierarchical transitions in composition and structure to address the challenge of stress concentrations that would otherwise arise at their interface. The translation of these into engineered materials holds promise for improved function of biomedical interfaces. Here, soft-hard tissue interfaces found in the body in health and disease, and the application of the diverse, functionally graded, and hierarchical structures that they present to bioinspired engineering materials are reviewed. A range of such bioinspired engineering materials and associated manufacturing technologies that are on the horizon in interfacial tissue engineering, hydrogel bioadhesion at the interfaces, and healthcare and medical devices are described.

Effects of hindlimb unloading and subsequent reloading on the structure and mechanical properties of Achilles tendon-to-bone attachment

While muscle and bone adaptations to deconditioning have been widely described, few studies have focused on the tendon enthesis. Our study examined the effects of mechanical loading on the structure and mechanical properties of the Achilles tendon enthesis. We assessed the fibrocartilage surface area, the organization of collagen, the expression of collagen II, the presence of osteoclasts, and the tensile properties of the mouse enthesis both after 14 days of hindlimb suspension (HU) and after a subsequent 6 days of reloading. Although soleus atrophy was severe after HU, calcified fibrocartilage (CFc) was a little affected. In contrast, we observed a decrease in non-calcified fibrocartilage (UFc) surface area, collagen fiber disorganization, modification of morphological characteristics of the fibrocartilage cells, and altered collagen II distribution. Compared to the control group, restoring normal loads increased both UFc surface area and expression of collagen II, and led to a crimp pattern in collagen. Reloading induced an increase in CFc surface area, probably due to the mineralization front advancing toward the tendon. Functionally, unloading resulted in decreased enthesis stiffness and a shift in site of failure from the osteochondral interface to the bone, whereas 6 days of reloading restored the original elastic properties and site of failure. In the context of spaceflight, our results suggest that care must be taken when performing countermeasure exercises both during missions and during the return to Earth.

Aging exacerbates the morphological and mechanical response of mineralized collagen fibrils in murine cortical bone to disuse

Mineralized collagen fibrils (MCFs) are the fundamental building blocks of bone tissue and contribute significantly to the mechanical behavior of bone. However, it is still largely unknown how the collagen network in bone responds to aging and the disuse normally accompanying it. Utilizing atomic force microscopy, nanoindentation and Raman spectroscopy, age-related alterations in the microstructure and mechanical properties of murine cortical tibia at multiple scales were investigated in this study. The potential difference in the responses of bone to disuse at different ages was studied. The results indicated that the age- and disuse-related alterations in bone initiate from MCFs in the bone matrix. The D-periodic spacing, radial elastic modulus of a single MCF and the mineral-to-matrix ratio on the cortical bone surface were larger in aged mice than in adult mice. Disuse, on the other hand, mainly has a major influence on aged mice, particularly on the morphology and mechanical properties of MCFs, but it only has modest effects on adult bone. These findings revealed insights into the morphological and mechanical adaptation of mineralized collagen fibrils in murine cortical bone to aging and disuse. STATEMENT OF SIGNIFICANCE: Bone is a complex structured composite material consisting of an interwoven framework of collagen fibrils reinforced by mineral particles and embedded in an extrafibrillar mineralized matrix. Utilizing atomic force microscopy, nanoindentation and Raman spectroscopy, this study suggests that the effects of aging, as well as the accompanying disuse, on the morphology and mechanical properties of bone initiate from the mineralized collagen fibril level. More interestingly, the MCF in the bone of aged mice seems to be more sensitive to disuse than that in adult mice. These findings significantly further the current understanding of the adaptation process of bone to aging at the mineralized collagen fibril level and provide direct insights into the physiological response of bone to aging and the abnormal mechanical environment.

Structural and pathological changes in the enthesis are influenced by the muscle contraction type during exercise

Mechanical stress is involved in the onset of sports-related enthesopathy. Although the amount of exercise undertaken is a recognized problem during disease onset, changes in muscle contraction type are also involved in the increase in mechanical stress during exercise. This study aimed to clarify the effects of increased mechanical stress associated with muscle contraction type and amount of exercise on enthesis. Twenty mice underwent treadmill exercise, and the muscle contraction type and overall load during exercise were adjusted by varying the angle and speed conditions. Histological analysis was used to the cross-sectional area of the muscle; area of the enthesis fibrocartilage (FC), and expression of inflammation-, degeneration-, and calcification-related factors in the FC area. In addition, the volume and structure of the bone and FC area were examined using microcomputer imaging. Molecular biological analysis was conducted to compare relative expression levels of inflammation and cytokine-related factors in tendons. The Overuse group, which increased the amount of exercise, showed no significant differences in parameters compared to the sedentary mice (Control group). The mice subjected to slow-speed downhill running (Misuse group) showed pathological changes compared to the Control and Overuse groups, despite the small amount of exercise. Thus, the enthesis FC area may be altered by local mechanical stress that would be increased by eccentric muscle contraction rather than by mechanical stress that increases with the overall amount of exercise. Clinical Significance: The muscle contraction type might be more involved in the onset of sports-related enthesopathy rather than the amount of exercise.

The effect of mechanical stress on enthesis homeostasis in a rat Achilles enthesis organ culture model

Tendons and ligaments are jointed to bones via an enthesis that is essential to the proper function of the muscular and skeletal structures. The aim of the study is to investigate the effect of mechanical stress on the enthesis. We used ex vivo models in organ cultures of rat Achilles tendons with calcaneus including the enthesis. The organ was attached to a mechanical stretching apparatus that can conduct cyclic tensile strain. We made the models of 1-mm elongation (0.5 Hz, 3% elongation), 2-mm elongation (0.5 Hz, 5% elongation), and no stress. Histological evaluation by Safranin O staining and Toluidin Blue and Picro Sirius red staining was conducted. Expression of sex-determining region Y-box 9 (Sox9), scleraxis (Scx), Runt-related transcription factor 2 (Runx2), and matrix metalloproteinase 13 (Mmp13) were examined by real-time polymerase chain reaction and immunocytochemistry. Terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate biotin nick end-labeling and live/dead staining and was conducted for evaluation of the apoptosis and cell viability. The structure of the enthesis was most maintained in the model of 1-mm elongation. The electronic microscope showed that the enthesis of the no stress model had ill-defined borders between fibrocartilage and mineralized fibrocartilage, and that calcification of mineralized fibrocartilage occurred in the model of 2-mm elongation. Sox9 and Scx was upregulated by 1-mm elongation, whereas Runx2 and Mmp13 were upregulated by 2-mm elongation. Apoptosis was inhibited by low stress. The results of this study suggested that 1-mm elongation can maintain the structure of the enthesis, while 2-mm elongation promotes degenerative changes.

Age-related cellular and microstructural changes in the rotator cuff enthesis

Rotator cuff injuries increase with age. The enthesis is the most frequent site of rotator cuff injury and degeneration. Understanding age-related changes of the enthesis are essential to determine the mechanism of rotator cuff injuries, degeneration, and to guide mechanistically driven therapies. In this study, we explored age-related cellular changes of the rotator cuff enthesis in young, mature, and aged rats. Here we found that the aged enthesis is typified by an increased mineralized zone and decreased nonmineralized zone. Proliferation, migration, and colony-forming potential of rotator cuff derived cells (RCECs) was attenuated with aging. The tenogenic and chondrogenic potential were significantly reduced, while the osteogenic potential increased in aged RCECs. The adipogenic potential increased in RCECs with age. This study explores the cellular differences found between young, mature, and aged rotator cuff enthesis cells and highlights the importance of using age-appropriate models, as well as provides a basis for further delineation of mechanisms and potential therapeutics for rotator cuff injuries.

The role of loading in murine models of rotator cuff disease

Rotator cuff disease pathogenesis is associated with intrinsic (e.g., age, joint laxity, muscle weakness) and extrinsic (e.g., mechanical load, fatigue) factors that lead to chronic degeneration of the cuff tissues. However, etiological studies are difficult to perform in patients due to the long duration of disease onset and progression. Therefore, the purpose of this study was to determine the effects of altered joint loading on the rotator cuff. Mice were subjected to one of three load-dependent rotator cuff tendinopathy models: underuse loading, achieved by injecting botulinum toxin-A into the supraspinatus muscle; overuse loading, achieved using downhill treadmill running; destabilization loading, achieved by surgical excision of the infraspinatus tendon. All models were compared to cage activity animals. Whole joint function was assessed longitudinally using gait analysis. Tissue-scale structure and function were determined using microCT, tensile testing, and histology. The molecular response of the supraspinatus tendon and enthesis was determined by measuring the expression of 84 wound healing-associated genes. Underuse and destabilization altered forepaw weight-bearing, decreased tendon-to-bone attachment strength, decreased mineral density of the humeral epiphysis, and reduced tendon strength. Transcriptional activity of the underuse group returned to baseline levels by 4 weeks, while destabilization had significant upregulation of inflammation, growth factors, and extracellular matrix remodeling genes. Surprisingly, overuse activity caused changes in walking patterns, increased tendon stiffness, and primarily suppressed expression of wound healing-related genes. In summary, the tendinopathy models demonstrated how divergent muscle loading can result in clinically relevant alterations in rotator cuff structure, function, and gene expression.

Subchondral bone plate thickness is associated with micromechanical and microstructural changes in the bovine patella osteochondral junction with different levels of cartilage degeneration

The influence of joint degeneration on the biomechanical properties of calcified cartilage and subchondral bone plate at the osteochondral junction is relatively unknown. Common experimental difficulties include accessibility to and visualization of the osteochondral junction, application of mechanical testing at the appropriate length scale, and availability of tissue that provides a consistent range of degenerative changes. This study addresses these challenges. A well-established bovine patella model of early joint degeneration was employed, in which micromechanical testing of fully hydrated osteochondral sections was carried out in conjunction with high-resolution imaging using differential interference contrast (DIC) optical light microscopy. A total of forty-two bovine patellae with different grades of tissue health ranging from healthy to mild, moderate, and severe cartilage degeneration, were selected. From the distal-lateral region of each patella, two adjacent osteochondral sections were obtained for the mechanical testing and the DIC imaging, respectively. Mechanical testing was carried out using a robotic micro-force acquisition system, applying compression tests over an array (area: 200 μm × 1000 μm, step size: 50 μm) across the osteochondral junction to obtain a stiffness map. Morphometric analysis was performed for the DIC images of fully hydrated cryo-sections. The levels of cartilage degeneration, DIC images, and the stiffness maps were used to associate the mechanical properties onto the specific tissue regions of cartilage, calcified cartilage, and subchondral bone plate. The results showed that there were up to 20% and 24% decreases (p < 0.05) in the stiffness of calcified cartilage and subchondral bone plate, respectively, in the severely degenerated group compared to the healthy group. Furthermore, there were increases (p < 0.05) in the number of tidemarks, bone spicules at the cement line, and the mean thickness of the subchondral bone plate with increasing levels of degeneration. The decreasing stiffness in the subchondral bone plate coupled with the presence of bone spicules may be indicative of a subchondral remodeling process involving new bone formation. Moreover, the mean thickness of the subchondral bone plate was found to be the strongest indicator of mechanical and associated structural changes in the osteochondral joint tissues.

Growth and mechanobiology of the tendon-bone enthesis

Tendons are cable-like connective tissues that transfer both active and passive forces generated by skeletal muscle to bone. In the mature skeleton, the tendon-bone enthesis is an interfacial zone of transitional tissue located between two mechanically dissimilar tissues: compliant, fibrous tendon to rigid, dense mineralized bone. In this review, we focus on emerging areas in enthesis development related to its structure, function, and mechanobiology, as well as highlight established and emerging signaling pathways and physiological processes that influence the formation and adaptation of this important transitional tissue.

Ultrasound characterization of bioinspired functionally graded soft-to-hard composites: Experiment and modeling

Functional grading is a distinctive feature adopted by nature to improve the transition between tissues that present a strong mismatch in mechanical properties, a relevant example being the tendon-to-bone attachment. Recent progress in multi-material additive manufacturing now allows for the design and fabrication of bioinspired functionally graded soft-to-hard composites. Nevertheless, this emerging technology depends on several design variables, including both material and mechanistic ingredients, that are likely to affect the mechanical performance of such composites. In this paper, a model-based approach is developed to describe the interaction of ultrasound waves with homogeneous and heterogeneous additively manufactured samples, which respectively display a variation either of the material ingredients (e.g., ratio of the elementary constituents) or of their spatial arrangement (e.g., functional gradients, damage). Measurements are performed using longitudinal bulk waves, which are launched and detected using a linear transducer array. First, model is calibrated by exploiting the signals measured on the homogeneous samples, which allow identifying relationships between the model parameters and the material composition. Second, the model is validated by comparing the signals measured on the heterogeneous samples with those predicted numerically. Overall, the reported results pave the way for characterizing and optimizing multi-material systems that display complex bioinspired features.

Effects of selective breeding for voluntary exercise, chronic exercise, and their interaction on muscle attachment site morphology in house mice

Skeletal muscles attach to bone at their origins and insertions, and the interface where tendon meets bone is termed the attachment site or enthesis. Mechanical stresses at the muscle/tendon-bone interface are proportional to the surface area of the bony attachment sites, such that a larger attachment site will distribute loads over a wider area. Muscles that are frequently active and/or are of larger size should cause attachment sites to hypertrophy (training effect); however, experimental studies of animals subjected to exercise have provided mixed results. To enhance our ability to detect training effects (a type of phenotypic plasticity), we studied a mouse model in which 4 replicate lines of High Runner (HR) mice have been selectively bred for 57 generations. Selection is based on the average number of wheel revolutions on days 5 & 6 of a 6-day period of wheel access as young adults (6-8 weeks old). Four additional lines are bred without regard to running and serve as non-selected controls (C). On average, mice from HR lines voluntarily run ~3 times more than C mice on a daily basis. For this study, we housed 50 females (half HR, half C) with wheels (Active group) and 50 (half HR, half C) without wheels (Sedentary group) for 12 weeks starting at weaning (~3 weeks old). We tested for evolved differences in muscle attachment site surface area between HR and C mice, plastic changes resulting from chronic exercise, and their interaction. We used a precise, highly repeatable method for quantifying the three-dimensional (3D) surface area of four muscle attachment sites: the humerus deltoid tuberosity (the insertion point for the spinodeltoideus, superficial pectoralis, and acromiodeltoideus), the femoral third trochanter (the insertion point for the quadratus femoris), the femoral lesser trochanter (the insertion point for the iliacus muscle), and the femoral greater trochanter (insertion point for the middle gluteal muscles). In univariate analyses, with body mass as a covariate, mice in the Active group had significantly larger humerus deltoid tuberosities than Sedentary mice, with no significant difference between HR and C mice and no interaction between exercise treatment and linetype. These differences between Active and Sedentary mice were also apparent in the multivariate analyses. Surface areas of the femoral third trochanter, femoral lesser trochanter, and femoral greater trochanter were unaffected by either chronic wheel access or selective breeding. Our results, which used robust measurement protocols and relatively large sample sizes, demonstrate that muscle attachment site morphology can be (but is not always) affected by chronic exercise experienced during ontogeny. However, contrary to previous results for other aspects of long bone morphology, we did not find evidence for evolutionary coadaptation of muscle attachments with voluntary exercise behavior in the HR mice.

Hedgehog signaling underlying tendon and enthesis development and pathology

Hedgehog (Hh) signaling has been widely acknowledged to play essential roles in many developmental processes, including endochondral ossification and growth plate maintenance. Furthermore, a rising number of studies have shown that Hh signaling is necessary for tendon enthesis development. Specifically, the well-tuned regulation of Hh signaling during development drives the formation of a mineral gradient across the tendon enthesis fibrocartilage. However, aberrant Hh signaling can also lead to pathologic heterotopic ossification in tendon or osteophyte formation at the enthesis. Therefore, the therapeutic potential of Hh signaling modulation for treating tendon and enthesis diseases remains uncertain. For example, increased Hh signaling may enhance tendon-to-bone healing by promoting the formation of mineralized fibrocartilage at the healing interface, but pathologic heterotopic ossification may also be triggered in the adjacent tendon. Further work is needed to elucidate the distinct functions of Hh signaling in the tendon and enthesis to support the development of therapies that target the pathway.

Toughening mechanisms for the attachment of architectured materials: The mechanics of the tendon enthesis

Architectured materials offer tailored mechanical properties but are limited in engineering applications due to challenges in maintaining toughness across their attachments. The enthesis connects tendon and bone, two vastly different architectured materials, and exhibits toughness across a wide range of loadings. Understanding the mechanisms by which this is achieved could inform the development of engineered attachments. Integrating experiments, simulations, and previously unexplored imaging that enabled simultaneous observation of mineralized and unmineralized tissues, we identified putative mechanisms of enthesis toughening in a mouse model and then manipulated these mechanisms via in vivo control of mineralization and architecture. Imaging uncovered a fibrous architecture within the enthesis that controls trade-offs between strength and toughness. In vivo models of pathology revealed architectural adaptations that optimize these trade-offs through cross-scale mechanisms including nanoscale protein denaturation, milliscale load-sharing, and macroscale energy absorption. Results suggest strategies for optimizing architecture for tough bimaterial attachments in medicine and engineering.

Treadmill running initiation times and bone-tendon interface repair in a murine rotator cuff repair model

Postoperative exercise has been demonstrated to be beneficial for bone-tendon interface (BTI) healing, yet the debate regarding the optimal time to initiate exercise after tendon enthesis repair is ongoing. This study aimed to evaluate the initiation times for exercise after enthesis repair. A total of 192 C57BL/6 mice underwent acute supraspinatus tendon injury repair. The animals were then randomly assigned to four groups: free cage activity after repair (control group); treadmill running started on postoperative day 2 (2-day delayed group); treadmill running started on postoperative day 7 (7-day delayed group), and treadmill running started on postoperative day 14 (14-day delayed group). Mice were euthanized at 4 and 8 weeks postoperatively, and histological, biomechanical, and bone morphometric tests were performed. Higher failure loads and bone volume fractions were found for the 7-day delayed group and the 14-day delayed group at 4 weeks postoperatively. The 7-day delayed group had better biomechanical properties and higher bone volume fractions than the 2-day delayed group at 4 weeks postoperatively. Histologically, the 7-day delayed group exhibited lower modified tendon-to-bone maturity scores than the control group and the 2-day delayed group at 4 and 8 weeks postoperatively. Quantitative reverse-transcription polymerase chain reaction results showed that the 7-day delayed group had higher expressions of chondrogenic- and osteogenic-related genes. Statement of clinical significance: Postoperative treadmill running initiated on postoperative day 7 had a more prominent effect on BTI healing than other treatment regimens in this study and could accelerate BTI healing and rotator cuff repair.

To move or not to move: the paradoxical effect of physical exercise in axial spondyloarthritis

In the last years, new researches focused on the role of biomechanical stress and microdamage in the pathogenesis of inflammatory arthritis and, in particular, in axial spondyloarthritis (axSpA). Animal models showed how entheseal stress and physical exercise could contribute to the development of inflammation and new bone formation at entheseal and articular sites, by activating innate immune system and the release of cytokines. Furthermore, clues of the involvement of biomechanical stress in the development of axSpA are present in clinical experiences. However, rehabilitation and exercise programmes are the cornerstone of treatment for axSpA, reducing disease activity and improving spinal function and quality of life. The concept of mechanical stress as a contributor to disease development and progression represents, potentially, a conceptual challenge for this approach. The aim of this review is to discuss the current evidence on the intriguing contribution of the biomechanical stress to the pathogenesis of inflammation and new bone formation and to evaluate and reflect on the role of exercise in the treatment and in the management of the disease, considering both the beneficial effects and its possible paradoxical action.

Engineering Musculoskeletal Grafts for Multi-Tissue Unit Repair: Lessons From Developmental Biology and Wound Healing

In the musculoskeletal system, bone, tendon, and skeletal muscle integrate and act coordinately as a single multi-tissue unit to facilitate body movement. The development, integration, and maturation of these essential components and their response to injury are vital for conferring efficient locomotion. The highly integrated nature of these components is evident under disease conditions, where rotator cuff tears at the bone-tendon interface have been reported to be associated with distal pathological alterations such as skeletal muscle degeneration and bone loss. To successfully treat musculoskeletal injuries and diseases, it is important to gain deep understanding of the development, integration and maturation of these musculoskeletal tissues along with their interfaces as well as the impact of inflammation on musculoskeletal healing and graft integration. This review highlights the current knowledge of developmental biology and wound healing in the bone-tendon-muscle multi-tissue unit and perspectives of what can be learnt from these biological and pathological processes within the context of musculoskeletal tissue engineering and regenerative medicine. Integrating these knowledge and perspectives can serve as guiding principles to inform the development and engineering of musculoskeletal grafts and other tissue engineering strategies to address challenging musculoskeletal injuries and diseases.

Joining soft tissues to bone: Insights from modeling and simulations

Entheses are complex multi-tissue regions of the musculoskeletal system serving the challenging task of connecting highly dissimilar materials such as the compliant tendon to the much stiffer bone, over a very small region. The first aim of this review is to highlight mathematical and computational models that have been developed to investigate the many attachment strategies present at entheses at different length scales. Entheses are also relevant in the medical context due to the high prevalence of orthopedic injuries requiring the reattachment of tendons or ligaments to bone, which are associated with a rather poor long-term clinical outcome. The second aim of the review is to report on the computational works analyzing the whole tendon to bone complex as well as targeting orthopedic relevant issues. Modeling approaches have provided important insights on anchoring mechanisms and surgical repair strategies, that would not have been revealed with experiments alone. We intend to demonstrate the necessity of including, in future models, an enriched description of enthesis biomechanical behavior in order to unravel additional mechanical cues underlying the development, the functioning and the maintaining of such a complex biological interface as well as to enhance the development of novel biomimetic adhesive, attachment procedures or tissue engineered implants.

Negative impact of disuse and unloading on tendon enthesis structure and function

Exposure to chronic skeletal muscle disuse and unloading that astronauts experience results in muscle deconditioning and bone remodeling. Tendons involved in the transmission of force from muscles to skeleton are also affected. Understanding the changes that occur in muscle, tendon, and bone is an essential step toward limiting or preventing the deleterious effects of chronic reduction in mechanical load. Numerous reviews have reported the effects of this reduction on both muscle and bone, and to a lesser extent on the tendon. However, none focused on the tendon enthesis, the tendon-to-bone attachment site. While the enthesis structure appears to be determined by mechanical stress, little is known about enthesis plasticity. Our review first looks at the relationship between entheses and mechanical stress, exploring how tensile and compressive loads determine and influence enthesis structure and composition. The second part of this review addresses the deleterious effects of skeletal muscle disuse and unloading on enthesis structure, composition, and function. We discuss the possibility that spaceflight-induced enthesis remodeling could impact both the capacity of the enthesis to withstand compressive stress and its potential weakness. Finally, we point out how altered compressive strength at entheses could expose astronauts to the risk of developing enthesopathies.

New horizons in reconstructing past human behavior: Introducing the "Tübingen University Validated Entheses-based Reconstruction of Activity" method

An accurate reconstruction of habitual activities in past populations and extinct hominin species is a paramount goal of paleoanthropological research, as it can elucidate the evolution of human behavior and the relationship between culture and biology. Variation in muscle attachment (entheseal) morphology has been considered an indicator of habitual activity, and many attempts have been made to use it for this purpose. However, its interpretation remains equivocal due to methodological shortcomings and a paucity of supportive experimental data. Through a series of studies, we have introduced a novel and precise methodology that focuses on reconstructing muscle synergies based on three-dimensional and multivariate analyses among entheses. This approach was validated using uniquely documented anthropological samples, experimental animal studies, histological observations, and geometric morphometrics. Here, we detail, synthesize, and critically discuss the findings of these studies, which overall point to the great potential of entheses in elucidating aspects of past human behavior.

Tissue Engineering for the Insertions of Tendons and Ligaments: An Overview of Electrospun Biomaterials and Structures

The musculoskeletal system is composed by hard and soft tissue. These tissues are characterized by a wide range of mechanical properties that cause a progressive transition from one to the other. These material gradients are mandatory to reduce stress concentrations at the junction site. Nature has answered to this topic developing optimized interfaces, which enable a physiological transmission of load in a wide area over the junction. The interfaces connecting tendons and ligaments to bones are called entheses, while the ones between tendons and muscles are named myotendinous junctions. Several injuries can affect muscles, bones, tendons, or ligaments, and they often occur at the junction sites. For this reason, the main aim of the innovative field of the interfacial tissue engineering is to produce scaffolds with biomaterial gradients and mechanical properties to guide the cell growth and differentiation. Among the several strategies explored to mimic these tissues, the electrospinning technique is one of the most promising, allowing to generate polymeric nanofibers similar to the musculoskeletal extracellular matrix. Thanks to its extreme versatility, electrospinning has allowed the production of sophisticated scaffolds suitable for the regeneration of both the entheses and the myotendinous junctions. The aim of this review is to analyze the most relevant studies that applied electrospinning to produce scaffolds for the regeneration of the enthesis and the myotendinous junction, giving a comprehensive overview on the progress made in the field, in particular focusing on the electrospinning strategies to produce these scaffolds and their mechanical, in vitro, and in vivo outcomes.

Enhanced Tendon-to-Bone Healing via IKKβ Inhibition in a Rat Rotator Cuff Model

BACKGROUND

More than 450,000 rotator cuff repairs are performed annually, yet healing of tendon to bone often fails. This failure is rooted in the fibrovascular healing response, which does not regenerate the native attachment site. Better healing outcomes may be achieved by targeting inflammation during the early period after repair. Rather than broad inhibition of inflammation, which may impair healing, the current study utilized a molecularly targeted approach to suppress IKKβ, shutting down only the inflammatory arm of the nuclear factor κB (NF-κB) signaling pathway.

PURPOSE

To evaluate the therapeutic potential of IKKβ inhibition in a clinically relevant model of rat rotator cuff repair.

STUDY DESIGN

Controlled laboratory study.

METHODS

After validating the efficacy of the IKKβ inhibitor in vitro, it was administered orally once a day for 7 days after surgery in a rat rotator cuff repair model. The effect of treatment on reducing inflammation and improving repair quality was evaluated after 3 days and 2, 4, and 8 weeks of healing, using gene expression, biomechanics, bone morphometry, and histology.

RESULTS

Inhibition of IKKβ attenuated cytokine and chemokine production in vitro, demonstrating the potential for this inhibitor to reduce inflammation in vivo. Oral treatment with IKKβ inhibitor reduced NF-κB target gene expression by up to 80% compared with a nontreated group at day 3, with a subset of these genes suppressed through 14 days. Furthermore, the IKKβ inhibitor led to enhanced tenogenesis and extracellular matrix production, as demonstrated by gene expression and histological analyses. At 4 weeks, inhibitor treatment led to increased toughness, no effects on failure load and strength, and decreases in stiffness and modulus when compared with vehicle control. At 8 weeks, IKKβ inhibitor treatment led to increased toughness, failure load, and strength compared with control animals. IKKβ inhibitor treatment prevented the bone loss near the tendon attachment that occurred in repairs in control.

CONCLUSION

Pharmacological inhibition of IKKβ successfully suppressed excessive inflammation and enhanced tendon-to-bone healing after rotator cuff repair in a rat model.

CLINICAL RELEVANCE

The NF-κB pathway is a promising target for enhancing outcomes after rotator cuff repair.

Assessing the effective elastic properties of the tendon-to-bone insertion: a multiscale modeling approach

The interphase joining tendon to bone plays the crucial role of integrating soft to hard tissues, by effectively transferring stresses across two tissues displaying a mismatch in mechanical properties of nearly two orders of magnitude. The outstanding mechanical properties of this interphase are attributed to its complex hierarchical structure, especially by means of competing gradients in mineral content and collagen fibers organization at different length scales. The goal of this study is to develop a multiscale model to describe how the tendon-to-bone insertion derives its overall mechanical behavior. To this end, the effective anisotropic stiffness tensor of the interphase is predicted by modeling its elastic response at different scales, spanning from the nanostructural to the mesostructural levels, using continuum micromechanics methods. The results obtained at a lower scale serve as inputs for the modeling at a higher scale. The obtained predictions are in good agreement with stochastic finite element simulations and experimental trends reported in literature. Such model has implication for the design of bioinspired bi-materials that display the functionally graded properties of the tendon-to-bone insertion.

Macroporous 3D Scaffold with Self-Fitting Capability for Effectively Repairing Massive Rotator Cuff Tear

The postoperative retear rate of direct repair of massive rotator cuff tear has risen up to 40% because of the dissatisfied tendon-to-bone healing and poor regenerative potential of remnant rotator cuff tissue. A biological scaffold that connects the remnant rotator cuff tissue and bone might be a promising substitute. In the present study, we have developed a macroporous three-dimensional scaffold poly(ester-urethane)urea (PEUU), with self-fitting capability employing thermally induced phase separation (TIPS) technique. The scaffold provides oriented connected macropores for cells migration, and promoted tendon-to-bone healing on the basis of surgical repair. The scaffolds were characterized by scanning electron microscopy, stress-strain test and cell biocompatibility study. In vitro studies exhibited that PEUU scaffold with suitable elastic mechanical properties can better support proliferation and migration of rabbit bone mesenchymal stem cells (RBMSCs). After three months postreconstruction of massive rotator cuff tear in a rabbit model using PEUU scaffold, there was complete regeneration of rotator cuff with physical tendon-to-bone interface and continuous tendon tissue, as observed from histological analysis. Further, biomechanical testing demonstrated that rotator cuff induced by PEUU scaffold had no significant difference as compared to normal rotator cuff. This macroporous, mechanically matched scaffold is potentially suitable for the application in massive rotator cuff repair. In conclusion, this study demonstrates the high efficiency of the macroporous 3D scaffold with self-fitting capability in facilitating rotator cuff regeneration.

The study of the lower limb entheses in the Neanderthal sample from El Sidrón (Asturias, Spain): How much musculoskeletal variability did Neanderthals accumulate?

Entheses have rarely been systematically studied in the field of human evolution. However, the investigation of their morphological variability (e.g., robusticity) could provide new insight into their evolutionary significance in the European Neanderthal populations. The aim of this work is to study the entheses and joint features of the lower limbs of El Sidrón Neanderthals (Spain; 49 ka), using standardized scoring methods developed on modern samples. Paleobiology, growth, and development of both juveniles and adults from El Sidrón are studied and compared with those of Krapina Neanderthals (Croatia, 130 ka) and extant humans. The morphological patterns of the gluteus maximus and vastus intermedius entheses in El Sidrón, Krapina, and modern humans differ from one another. Both Neanderthal groups show a definite enthesis design for the gluteus maximus, with little intrapopulation variability with respect to modern humans, who are characterized by a wider range of morphological variability. The gluteus maximus enthesis in the El Sidrón sample shows the osseous features of fibrous entheses, as in modern humans, whereas the Krapina sample shows the aspects of fibrocartilaginous ones. The morphology and anatomical pattern of this enthesis has already been established during growth in all three human groups. One of two and three of five adult femurs from El Sidrón and from Krapina, respectively, show the imprint of the vastus intermedius, which is absent among juveniles from those Neanderthal samples and in modern samples. The scant intrapopulation and the high interpopulation variability in the two Neanderthal samples is likely due to a long-term history of small, isolated populations with high levels of inbreeding, who also lived in different ecological conditions. The comparison of different anatomical entheseal patterns (fibrous vs. fibrocartilaginous) in the Neanderthals and modern humans provides additional elements in the discussion of their functional and genetic origin.

Multiscale effects of spaceflight on murine tendon and bone

Despite a wealth of data on the effects of spaceflight on tendons and bones, little is known about its effects on the interfacial tissue between these two structures, the enthesis. Mice were sent to space on three separate missions: STS-131, STS-135, and Bion-M1 to determine how spaceflight affects the composition, structure, mechanics, and gene expression of the humerus-supraspinatus and calcaneus-Achilles entheses. At the nanoscale, spaceflight resulted in decreased carbonate levels in the bone, likely due to increased remodeling, as suggested by increased expression of genes related to osteoclastogenesis (CatK, Tnfsf11) and mature osteoblasts (Col1, Osc). Tendons showed a shift in collagen fibril size towards smaller diameters that may have resulted from increased expression of genes related to collagen degradation (Mmp3, Mmp13). These nanoscale changes did not result in micro- and milliscale changes to the structure and mechanics of the enthesis. There were no changes in bone volume, trabecular structure, failure load, or stiffness with spaceflight. This lack of tissue-level change may be anatomy based, as extremities may be less sensitive to spaceflight than central locations such as vertebrae, yet results highlight that the tendon enthesis may be robust against negative effects of spaceflight.

Spaceflight-Induced Bone Tissue Changes that Affect Bone Quality and Increase Fracture Risk

PURPOSE OF REVIEW

Bone mineral density and systemic factors are used to assess skeletal health in astronauts. Yet, even in a general population, these measures fail to accurately predict when any individual will fracture. This review considers how long-duration human spaceflight requires evaluation of additional bone structural and material quality measures that contribute to microgravity-induced skeletal fragility.

RECENT FINDINGS

In both humans and small animal models following spaceflight, bone mass is compromised via reduced bone formation and elevated resorption levels. Concurrently, bone structural quality (e.g., trabecular microarchitecture) is diminished and the quality of bone material is reduced via impaired tissue mineralization, maturation, and maintenance (e.g., mediated by osteocytes). Bone structural and material quality are both affected by microgravity and may, together, jeopardize astronaut operational readiness and lead to increased fracture risk upon return to gravitational loading. Future studies need to directly evaluate how bone quality combines with diminished bone mass to influence bone strength and toughness (e.g., resistance to fracture). Bone quality assessment promises to identify novel biomarkers and therapeutic targets.

Experimental evidence that physical activity affects the multivariate associations among muscle attachments (entheses)

The morphology of entheses (muscle/tendon attachment sites) on bones is routinely used in paleontological and bioarcheological studies to infer the physical activity patterns of ancient vertebrate species including hominins. However, such inferences have often been disputed owing to limitations of the quantitative methods commonly employed and a lack of experimental evidence demonstrating direct effects of physical activity on entheseal morphology. Recently, we introduced a new and improved method of quantifying and analyzing entheseal morphology that involves repeatable three-dimensional measurements combined with multivariate statistics focused on associations among multiple entheses. Here, to assess the validity of our method for investigating variation in entheseal morphology related to physical activity patterns, we analyzed femora of growing turkeys that were experimentally exercised for 10 weeks on either an inclined or declined treadmill or served as controls (N=15 individuals, 5 per group). Our multivariate approach identified certain patterns involving three different entheses (associated with the gluteus primus, medial gastrocnemius, vastus medialis and adductor magnus muscles) that clearly differentiated controls from runners. Importantly, these differences were not observable when comparing groups within each of the three entheseal structures separately. Body mass was not correlated with the resulting multivariate patterns. These results provide the first experimental evidence that variation in physical activity patterns has a direct influence on entheseal morphology. Moreover, our findings highlight the promise of our newly developed quantitative methods for analyzing the morphology of entheses to reconstruct the behavior of extinct vertebrate species based on their skeletal remains.

Experimental proof that multivariate patterns among muscle attachments (entheses) can reflect repetitive muscle use

Reconstructions of habitual activity in past populations and extinct human groups is a primary goal of paleoanthropological research. Muscle attachment scars (entheses) are widely considered as indicators of habitual activity and many attempts have been made to use them for this purpose. However, their interpretation remains equivocal due to methodological limitations and a paucity of empirical data supporting an interaction between systematic muscle forces and entheseal morphology. We have recently addressed the first issue with precise three-dimensional measuring protocols and rigorous multivariate analysis focusing on the patterns among different entheses rather than comparing each entheseal structure separately. In a previous study, the resulting entheseal correlations reflected synergistic muscle groups that separated individuals according to their lifelong occupational activities. Here we address the second issue by applying this methodology to existing micro-computed tomography data from rats that have undergone muscle stimulation under experimental conditions. In contrast to previous animal studies, we relied on blind analytical procedures across two research institutions and controlled for most factors of interindividual variability. Results demonstrated that the multivariate associations among different entheseal surfaces can directly reflect repetitive muscle recruitment and provide essential information on muscle use.

Biomechanical Testing of Murine Tendons

Tendon disorders are common, affect people of all ages, and are often debilitating. Standard treatments, such as anti-inflammatory drugs, rehabilitation, and surgical repair, often fail. In order to define tendon function and demonstrate efficacy of new treatments, the mechanical properties of tendons from animal models must be accurately determined. Murine animal models are now widely used to study tendon disorders and evaluate novel treatments for tendinopathies; however, determining the mechanical properties of mouse tendons has been challenging. In this study, a new system was developed for tendon mechanical testing that includes 3D-printed fixtures that exactly match the anatomies of the humerus and calcaneus to mechanically test supraspinatus tendons and Achilles tendons, respectively. These fixtures were developed using 3D reconstructions of native bone anatomy, solid modeling, and additive manufacturing. The new approach eliminated artifactual gripping failures (e.g., failure at the growth plate failure rather than in the tendon), decreased overall testing time, and increased reproducibility. Furthermore, this new method is readily adaptable for testing other murine tendons and tendons from other animals.

Understanding the Stiff-to-Compliant Transition of the Meniscal Attachments by Spatial Correlation of Composition, Structure, and Mechanics

Recently, the scientific community has shown considerable interest in engineering tissues with organized compositional and structural gradients to mimic hard-to-soft tissue interfaces. This effort is hindered by an incomplete understanding of the construction of native tissue interfaces. In this work, we combined Raman microscopy and confocal elastography to map compositional, structural, and mechanical features across the stiff-to-compliant interface of the attachments of the meniscus in the knee. This study provides new insight into the methods by which biology mediates multiple orders of magnitude changes in stiffness over tens of microns. We identified how the nano- to mesoscale architecture mediates complex microscale transitional regions across the interface: two regions defined by chemical composition, five distinguished by structural features, and three mechanically distinct regions. We identified three major components that lead to a robust interface between a soft tissue and bone: mobile collagen fiber units, a continuous interfacial region, and a local stiffness gradient. This tissue architecture allows for large displacements of collagen fibers in the attachments, enabling meniscal movement without localizing strains to the soft tissue-to-bone interface. The interplay of these regions reveals a method relying on hierarchical structuring across multiple length scales to minimize stress concentrators between highly dissimilar materials. These insights inspire new design strategies for synthetic soft tissue-to-bone attachments and biomimetic material interfaces.

Helical nanofiber yarn enabling highly stretchable engineered microtissue

Development of microtissues that possess mechanical properties mimicking those of native stretchable tissues, such as muscle and tendon, is in high demand for tissue engineering and regenerative medicine. However, regardless of the significant advances in synthetic biomaterials, it remains challenging to fabricate living microtissue with high stretchability because application of large strains to microtissues can damage the cells by rupturing their structures. Inspired by the hierarchical helical structure of native fibrous tissues and its behavior of nonaffine deformation, we develop a highly stretchable and tough microtissue fiber made up of a hierarchical helix yarn scaffold, scaling from nanometers to millimeters, that can overcome this limitation. This microtissue can be stretched up to 15 times its initial length and has a toughness of 57 GJ m^-3 More importantly, cells grown on this scaffold maintain high viability, even under severe cyclic strains (up to 600%) that can be attributed to the nonaffine deformation under large strains, mimicking native biopolymer scaffolds. Furthermore, as proof of principle, we demonstrate that the nanotopography of the helical nanofiber yarn is able to induce cytoskeletal alignment and nuclear elongation, which promote myogenic differentiation of mesenchymal stem cells by triggering nuclear translocation of transcriptional coactivator with PDZ-binding motif (TAZ). The highly stretchable microtissues we develop here will facilitate a variety of tissue engineering applications and the development of engineered living systems.