Tooth-wear patterns in subjects with Class II Division 1 malocclusion and normal occlusion

The association between orthodontic treatment and temporomandibular disorders diagnosis and disease characteristics

BACKGROUND

The association between orthodontic treatment and temporomandibular disorders (TMD) has been contentious in the literature.

OBJECTIVES

To analyse the associations between orthodontic treatment and TMD diagnosis and diseases characteristics.

METHODS

This case-control study included 291 individuals, 192 TMDs and 99 controls. All patients underwent assessment based on a questionnaire and a clinical examination according to Axis I of the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Differences in orthodontic treatment between TMDs and controls, as well as across different TMD diagnoses within the TMD group were analysed. Patients who underwent orthodontic treatment were compared to those who did not, regarding their trauma history, bruxism, aggressive teeth brushing, level of oral hygiene, pain scores, muscle tenderness scores and subjective sleep quality.

RESULTS

Of the 291 participants, 119 (40.9%) underwent orthodontic treatment and 172 (59.1%) had no orthodontics experience. Orthodontic treatment included: mandibular orthodontic treatment (102 subjects) and maxillary orthodontic treatment (113 subjects) of those 47 used a headgear. Following multivariate analysis among TMDs, orthodontic treatment was associated with a good level of oral hygiene versus poor (Odds ratio [OR]: 5.17 [1.04-25.59]), lower number of tender muscles [OR = 0.84 (0.74-0.96)] and lower (better) Pittsburgh Sleep Quality Index (PSQI) scores (OR = 0.86 [0.76-0.97]). None of the studied parameters maintained a statistically significant association with orthodontic treatment in the multivariate analysis among the entire study population.

CONCLUSIONS

Utilising a holistic approach, this study supports the main hypothesis that orthodontic treatment is not associated with TMD diagnosis and disease characteristics.

Long-term occlusal tooth wear at the onset of permanent dentition

OBJECTIVES

This study quantified the long-term occlusal wear in the natural posterior teeth and the associations per tooth type within the dentition.

METHODS

The sample included 70 orthodontically treated subjects (52 females and 18 males; median age, 14.3 years), followed for a 12.7-year period. They were consecutively selected with no tooth wear-related criteria. Post-treatment (T1) and follow-up dental casts (T2) were scanned and superimposed through three-dimensional methods. Occlusal wear volume of posterior teeth and tooth wear patterns were investigated through non-parametric statistics and analysis of covariance.

RESULTS

There were no significant differences between contralateral teeth. The average occlusal wear per posterior tooth was 2.3 mm3, with 65.2% of teeth showing values greater than 1 mm3. Males, mandibular teeth, and first molars exhibited slightly greater wear levels than females (median, 2.57 and 2.21 mm3, respectively; p = 0.005), maxillary teeth, and first or second premolars, respectively. In all first premolars and in the mandibular second premolars, the buccal cusps were primarily affected with no other distinct patterns. There were weak to moderate correlations between tooth types, apart from certain strong correlations detected in males.

CONCLUSIONS

Posterior tooth wear was highly prevalent after a 13-year period starting at the onset of permanent dentition. The detected patterns are in accordance with the concept of canine guidance occlusion that is transforming into group synergy through function.

CLINICAL RELEVANCE

The widespread tooth wear occurrence and the high intra- and inter-individual variability underline the need for individual patient monitoring to identify high-risk patients at early stages.

Risk factors of tooth wear in permanent dentition: A scoping review

BACKGROUND

Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors.

OBJECTIVE

This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement.

METHODS

The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies.

RESULTS

2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored.

CONCLUSIONS

TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches.

Prevalence of tooth wear and associated factors: A birth cohort study

OBJECTIVES

To investigate the prevalence of tooth wear and associated factors in adults from the 1982 Pelotas Birth Cohort.

METHODS

A subsample of the 5,914 individuals from the 1982 Pelotas Birth Cohort was randomly selected to be interviewed and clinically examined at the age of 31. Tooth wear was evaluated using a simplified version of the Tooth Wear Index (TWI), considering the absence or presence of tooth wear in dentin of first molars and anterior teeth (incisors and canines). Independent variables were socioeconomic, demographic, unhealthy behavior, and mental health. Crude and adjusted Poisson regression models were employed. A significant level of P ≤ 0.05 was adopted.

RESULTS

A total of 537 individuals were evaluated. A tooth wear prevalence of 61.6% was observed. Females presented a statistically significant lower tooth wear in dentin prevalence ratio (PR) compared to males in the adjusted analysis (PR 0.76; 95% CI: 0.67-0.86). Acid beverage consumption (PR 1.22; 95% CI: 1.01-1.49) and consumption of alcoholic beverages (PR 1.19; 95% CI: 1.04-1.35) were positively associated with tooth wear.

CONCLUSION

Almost 2/3 of the surveyed individuals presented tooth wear in dentin. Being a male, higher consumption of alcohol and acidic beverages were factors associated with tooth wear.

CLINICAL SIGNIFICANCE

There was a high prevalence of tooth wear in dentin in the adult population. Data has also shown the etiological complexity of tooth wear, reinforcing the importance of an early diagnosis and the establishment of preventive measures to decrease the potentially hazardous effect of tooth wear over time.

The consequences of living with a severe malocclusion: A review of the literature

AIM

To facilitate the orthognathic shared decision-making process by identifying and applying existing research evidence to establish the potential consequences of living with a severe malocclusion.

METHODS

A comprehensive narrative literature review was conducted to explore the potential complications of severe malocclusion. A systematic electronic literature search of four databases combined with supplementary hand searching identified 1024 articles of interest. A total of 799 articles were included in the narrative literature review, which was divided into 10 themes: Oral Health Related Quality Of Life; Temporomandibular Joint Dysfunction; Masticatory Limitation; Sleep Apnoea; Traumatic Dental Injury; Tooth Surface Loss; Change Over Time; Periodontal Injury; Restorative Difficulty; and Functional Shift and Dual Bite. A deductive approach was used to draw conclusions from the evidence available within each theme.

RESULTS

The narrative literature review established 27 conclusions, indicating that those living with a severe malocclusion may be predisposed to a range of potential consequences. With the exception of Oral Health Related Quality Of Life, which is poorer in adults with severe malocclusion than those with normal occlusions, and the risk of Traumatic Dental Injury, which increases when the overjet is >5 mm in the permanent and 3 mm in the primary dentition, the evidence supporting the remaining conclusions was found to be of low to moderate quality and at high risk of bias.

CONCLUSION

This article summarises the findings of a comprehensive narrative literature review in which all of the relevant research evidence within a substantive investigative area is established and evaluated. Notwithstanding limitations regarding the quality of the available evidence; when combined with clinical expertise and an awareness of individual patient preferences, the conclusions presented may facilitate the orthognathic shared decision-making process and furthermore, may guide the development of the high-quality longitudinal research required to validate them.

Longitudinal 3D Study of Anterior Tooth Wear from Adolescence to Adulthood in Modern Humans

Simple Summary

Tooth wear is the loss of tooth substance during everyday functioning by means other than dental caries. It is expected at a certain level in every person, and it increases with age. In the last decades, due to the increased life expectancy and high patient demands, it has become an important problem modern dentistry has to face. However, the average amount of tooth wear among individuals remains controversial. The purpose of this clinical study was to precisely detect the extent of anterior tooth wear over a thirteen-year period, from adolescence to adulthood. The present study revealed the very high tooth wear occurrence in the population already at early adulthood and showed that wear monitoring at an individual level is important for dentists to enable the better understanding of the problem and allow timely targeted interventions for patients in need. These might be preventive, such as the prescription of mouth guards to limit grinding and the cessation of harmful habits that lead to tooth wear, or interceptive, such as the restoration of the lost tooth substance to stop the progress of the condition and improve esthetics and function.

Abstract

In modern humans, tooth wear can easily be observed as a loss of tooth substance, but its precise measurement is problematic. The aim of this longitudinal cohort study was to determine the precise amount of occlusal tooth wear in the anterior permanent dentition from adolescence to adulthood. Corresponding tooth crowns from serial 3D digital dental models of 72 individuals were best fit-approximated by applying novel, highly accurate 3D superimposition methods. The superimposed crowns were simultaneously sliced on intact structures, and the differences in the volumes of the subsequent occlusal parts were calculated. Over a thirteen-year period, there was an average loss of anterior occlusal surfaces of 1.58 mm³ per tooth. Tooth surface loss in at least one tooth was higher than 1 mm³ in 93.1% of the human subjects. Tooth wear severity differed by sex and tooth type, with males showing higher values versus females and upper canines versus other anterior teeth. The study revealed the endemic occurrence of occlusal anterior tooth wear, highlighting the need for monitoring of the condition in the population to identify high-risk patients and enable timely interventions. The novel methods applied here on 3D digital models are recommended for this.

Different approaches to the treatment of skeletal Class II malocclusion during growth: Bionator versus extraoral appliance

INTRODUCTION

Class II malocclusion, which has a significant incidence in the population, may compromise facial esthetics and the smile, as well as the masticatory and respiratory functions. Often associated with skeletal abnormalities, it severely affects and compromises quality of life. An accurate diagnosis is fundamental to prepare a treatment plan to correct dental and skeletal anomalies.

OBJECTIVES

This study discusses treatment alternatives to the correction of Class II division 1 and 2 malocclusion in growing patients, using a Bionator and an extraoral appliance.

Tooth wear patterns in subjects with class II division 1 and class II division 2 malocclusion

INTRODUCTION

There is an increasing trend of malocclusion among children, so it is necessary to identify the cause of the tooth wear so that the orthodontist can treat the patient accordingly. It is necessary to determine the wear patterns of different malocclusions. Therefore, the aim of our study was to compare the patterns of tooth wear among two categories of Angle's class II malocclusions, i.e. class II division 1 and class II division 2.

MATERIAL AND METHODS

The sample consisted of 100 pretreatment orthodontic patients in the age group of 15-25 years with Angle's class II malocclusion and were divided into following two groups: (a) Group 1: 50 subjects with full cusp Angle's class II division 1 malocclusion. (b) Group 2: 50 subjects with full cusp Angle's class II division 2 malocclusion. Clinical examination of the patients for tooth wear was done supplemented with dental casts, intraoral photographs and intraoral radiographs. Then each group was assessed for severity of tooth wear according to modified tooth wear index (TWI) given by de Carvalo Sales-Peres et al. Scores were subjected to statistical analysis and the pattern of tooth wear among the two groups of class II malocclusion was compared. A correlation between the gender of the patient and the tooth wear was also determined. The level of statistical significance (p-value) was less than 0.05.

RESULTS

The class II division 1 subjects showed statistically greater wear on the occlusal surfaces of the maxillary canines, first, second premolar and first molar, and the occlusal surfaces of the mandibular first molars. The class II division 2 subjects showed statistically greater tooth wear on the labial surfaces of the mandibular central and lateral incisors, the incisal surface of maxillary and mandibular incisors, the palatal surfaces of the maxillary second premolars, first and second molars. In class II division 1 subjects, the tooth wear was significant on the buccal surface of maxillary canines, occlusal surface of mandibular first premolars and second molars in males. In class II division 2 subjects, the tooth wear was significant on the buccal surface of mandibular canines, palatal surface of maxillary central incisors in females and palatal surface of maxillary first premolars in males.

CONCLUSIONS

The results of this study suggested that the two categories of Angle's class II malocclusion have different tooth-wear patterns. The wear patterns were different in both the sexes. Men showed higher occlusal wear scores than did women. The findings also suggest that tooth wear in relation to malocclusion is physiologic and is due to dissimilar interocclusal arrangement.

Achieving Better Function through Combining Orthodontics and Restorative Dentistry in the Case of Dental Abrasions

This case report describes the orthodontic treatment used to prepare for restorative dentistry, aimed at the functional rehabilitation of an adult patient with Class I malocclusion, right posterior crossbite, and significant tooth wear on the palatal face of the maxillary canine to canine. The orthodontic treatment was performed with a total fixed appliance mini-expandex-type expander, associated with vertical elastics. Good dental intercuspation was obtained and enabled conditions for the restoration of the abrasions on the palatal surfaces of the maxillary incisors and canines and the tips of the buccal cusps of the maxillary right premolars and first molar. Excellent results were found during a 37-month follow-up.

Tooth wear during orthodontic treatment with fixed appliances: a systematic review

OBJECTIVES

Tooth wear, additional to the physiologic alterations of the dentition, may occur during orthodontic treatment. The objective of the present review was to investigate systematically the literature relevant to its progression in patients having undergone comprehensive orthodontic treatment.

DATA SOURCES

Search without restrictions in eight databases since inception and hand searching until October 2017 was performed.

DATA SELECTION

Studies evaluating tooth wear immediately before and after the completion of orthodontic treatment with fixed appliance were evaluated independently and in duplicate.

DATA EXTRACTION

Following study retrieval and selection, data on volumetric and surface tooth wear was extracted. Individual study risk of bias assessment was performed using the Risk Of Bias In Non-randomised Studies - of Interventions (ROBINS-I) tool, and the overall quality of the evidence was assessed with the Grades of Recommendation, Assessment, Development and Evaluation approach.

DATA SYNTHESIS

All three finally included studies reported wear of teeth during the period of treatment but were at serious risk of bias. Two of them investigated tooth wear by 3D volumetric measurements and one used grading scales. The mean volume reduction was 1.02 mm³ per tooth for the incisor group [95% Confidence Interval (CI): 0.84-1.20], 1.62 mm³ for the canines [95% CI: 0.8-2.38; I²= 96%; random effects method] and 0.95 mm³ for premolars and molars [95% CI: 0.84-1.07]. The overall quality of evidence limited the confidence in the observed estimates.

CONCLUSIONS

Varying degrees of tooth wear were reported after comprehensive orthodontic treatment. Further studies are needed in order to elucidate how much is associated with orthodontic treatment and/or physiologic alterations of the dentition.

Quantitative comparison of incisal tooth wear in patients receiving one-phase or two-phase treatment for skeletal Class III malocclusion with anterior crossbite

OBJECTIVES

The present study aimed to compare the amount of incisal tooth wear in the maxillary central incisors of patients with skeletal Class III malocclusion and anterior crossbite receiving one-phase or two-phase treatment. The hypothesis was that tooth wear would differ according to treatment modalities.

MATERIALS AND METHODS

Maxillary dental casts obtained before (T1) and after (T2) orthodontic treatment were divided into three groups. Group I consisted of casts from 21 patients (7 males, 14 females; mean age 9.8 years) who received two-phase treatment (maxillary protraction followed by fixed appliance therapy). Group II comprised casts from 37 patients who underwent orthodontic camouflage treatment for crossbite, subdivided according to age. Group IIa consisted of casts from 15 adolescents (8 males, 7 females; mean age 13.5 years), and group IIb consisted of casts from 22 adults (13 males, 9 females; mean age 24.5 years). Maxillary dental casts obtained at T1 and T2 were scanned. For each pair of digital images, T2 was superimposed on T1 using the best-fit method. Tooth wear was quantified and compared among groups.

RESULTS

Significantly less tooth wear was observed in group I compared to groups IIa and IIb, but no difference was found between groups IIa and IIb. Spearman correlation analysis revealed no significant correlation between tooth wear and age, treatment duration, or craniofacial morphology.

CONCLUSIONS

Despite the long duration of early treatment, it caused less wear of the maxillary central incisors than did orthodontic camouflage treatment.

Occlusal wear and occlusal condition in a convenience sample of young adults

OBJECTIVE

To study progression of tooth wear quantitatively in a convenient sample of young adults and to assess possible correlations with occlusal conditions.

METHODS

Twenty-eight dental students participated in a three-year follow up study on tooth wear. Visible wear facets on full arch gypsum casts were assessed using a flatbed scanner and measuring software. Regression analyses were used to assess possible associations between the registered occlusal conditions 'occlusal guidance scheme', 'vertical overbite', 'horizontal overbite', 'depth of sagittal curve', 'canine Angle class relation', 'history of orthodontic treatment', and 'self-reported grinding/clenching' (independent variables) and increase of wear facets (dependent variable).

RESULTS

Mean increase in facet surface areas ranged from 1.2 mm2 (premolars, incisors) to 3.4 mm2 (molars); the relative increase ranged from 15% to 23%. Backward regression analysis showed no significant relation for 'group function', 'vertical overbite', 'depth of sagittal curve', 'history of orthodontic treatment' nor 'self-reported clenching. The final multiple linear regression model showed significant associations amongst 'anterior protected articulation' and 'horizontal overbite' and increase of facet surface areas. For all teeth combined, only 'anterior protected articulation' had a significant effect. 'Self reported grinding' did not have a significant effect (p>0.07).

CONCLUSIONS

In this study 'anterior protected articulation' and 'horizontal overbite', were significantly associated with the progression of tooth wear. Self reported grinding was not significantly associated with progression of tooth wear.

CLINICAL SIGNIFICANCE

Occlusal conditions such as anterior protected articulation and horizontal overbite seem to have an effect on the progression of occlusal tooth wear in this convenient sample of young adults.

A review of the oral health-related evidence that supports the orthodontic treatment need indices

BACKGROUND AND OBJECTIVES

To date, there is no evidence-based method of quantification for malocclusion. Consequently, how deviant occlusal traits should be scored and weighted relative to one another is a matter of serious debate. Orthodontic Treatment Need Indices (OTNI) use the subjective opinion of the experts, as their foundation, to define the pathological boundaries (cut-offs) of occlusal traits. This paper reviews the evidence relating malocclusions or deviated occlusal traits to oral health problems, and investigates if this evidence supports the cut-off points and the rationale used for OTNI.

MATERIALS AND METHODS

The relevant cited studies and reviews from the MEDLINE, Web of Science, Scopus, Cochrane databases, and scientific textbooks were used. The citation rate was confirmed by using the Google Scholar.

RESULTS

So far, the evidence for harmful effects of deviated occlusal traits on oral health is either lacking or exists as cross-sectional (mostly) and longitudinal (a few and primarily short-term) studies. When an association was reported between a deviated occlusal trait and an oral health problem, either the strength of that association was weak, or due to methodological issues, findings were not conclusive. Consequently, establishing a cause and effect relationship is difficult. Further, commonly used OTNI do not record a full spectrum of occlusal traits, and relating their ranking or scoring systems to the available evidence is difficult. Therefore, there is little evidence to suggest that individuals with a high need (high score), as measured by OTNI, will necessarily put at risk their oral health if they turn down orthodontic therapy.

CONCLUSION

OTNI have a role in the epidemiology and can be used for resource planning, but their predictive value to detect the future objective functional deficits or oral health problems is questionable. OTNI will need revalidation over time with emerging research findings.

Tooth-wear patterns in adolescents with normal occlusion and Class II Division 2 malocclusion

INTRODUCTION

In this study, we investigated tooth-wear patterns in adolescents with either normal occlusion or Class II Division 2 malocclusion.

METHODS

The sample consisted of dental casts from 165 subjects that were divided into 2 groups: 115 normal occlusion subjects (mean age, 14.3 years) and 50 complete Class II Division 2 subjects (mean age, 13.9 years). Dental wear was assessed by using a modified version of the tooth wear index. The 2 groups were compared with the Mann-Whitney test for the frequency and severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%.

RESULTS

The normal occlusion group statistically had greater tooth wear on the incisal surfaces of the maxillary lateral incisors and the incisal surfaces of the maxillary canines than did the Class II Division 2 malocclusion group. The malocclusion group showed statistically greater tooth wear on the labial surfaces of the mandibular lateral incisors, the occlusal surfaces of the maxillary premolars and first molars, the occlusal surfaces of the mandibular premolars, the palatal surfaces of the maxillary second premolars, and the buccal surfaces of the mandibular premolars and first molars than did the normal occlusion group.

CONCLUSIONS

Subjects with normal occlusion and those with complete Class II Division 2 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but, rather, the consequence of different interocclusal arrangements.