Non-isothermal dehydration kinetic study of aspartame hemihydrate using DSC, TGA and DSC-FTIR microspectroscopy

Ni-Zn/CeO2 nanocomposites for enhanced adsorptive removal of 4-chlorophenol

Chlorophenols are one of the major organic pollutants responsible for the contamination of water bodies. This study explores the application of Ni-Zn/CeO2 nanocomposites, synthesized via the aqueous co-precipitation method, as effective adsorbents for the 4-chlorophenol removal from aqueous solutions. The nanocomposites' chemical and structural characteristics were assessed using different physical characterization methods, viz. X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential, using a Box-Behnken design within response surface methodology, optimal conditions of pH 3, temperature 20 °C, contact time 120 min, adsorbent dosage 0.05 g, and 4-chlorophenol concentration 50 ppm are identified. Among the nanocomposites tested, NZC 20:10:70, with 20% Ni and 10% Zn, achieves enhanced performance, removing 99.1% of 4-chlorophenol within 2 h. Adsorption kinetics follow the pseudo-second-order model and equilibrium data fit the Freundlich isotherm. Thermodynamic analysis indicates an exothermic and spontaneous process. The adsorption capacity of NZC 20:10:70 shows significant enhancement, growing from 19.85 mg/g at 10 ppm to 96.33 mg/g at 50 ppm initial concentration. Physical characterization confirms NZC 20:10:70's superior properties, including a high surface area of 118.471 m2/g. Evaluating economic viability, NZC 20:10:70 demonstrates robust reusability, retaining 85% efficiency over eight regeneration cycles. These results highlight NZC 20:10:70 as a promising adsorbent for effective and sustainable chlorophenol removal in water treatment.

Studies on the Thermal Decomposition Course of Nitrogen-Rich Heterocyclic Esters as Potential Drug Candidates and Evaluation of Their Thermal Stability and Properties

Drug candidates must undergo thermal evaluation as early as possible in the preclinical phase of drug development because undesirable changes in their structure and physicochemical properties may result in decreased pharmacological activity or enhanced toxicity. Hence, the detailed evaluation of nitrogen-rich heterocyclic esters as potential drug candidates, i.e., imidazolidinoannelated triazinylformic acid ethyl esters 1-3 (where R1 = 4-CH3 or 4-OCH3 or 4-Cl, and R2 = -COOC2H5) and imidazolidinoannelated triazinylacetic acid methyl esters 4-6 (where R1 = 4-CH3 or 4-OCH3 or 4-Cl, and R2 = -CH2COOCH3)-in terms of their melting points, melting enthalpy values, thermal stabilities, pyrolysis, and oxidative decomposition course-has been carried out, using the simultaneous thermal analysis methods (TG/DTG/DSC) coupled with spectroscopic techniques (FTIR and QMS). It was found that the melting process (documented as one sharp peak related to the solid-liquid phase transition) of the investigated esters proceeded without their thermal decomposition. It was confirmed that the melting points of the tested compounds increased in relation to R1 and R2 as follows: 2 (R1 = 4-OCH3; R2 = -COOC2H5) < 6 (R1 = 4-Cl; R2 = -CH2COOCH3) < 5 (R1 = 4-OCH3; R2 = -CH2COOCH3) < 3 (R1 = 4-Cl; R2 = -COOC2H5) < 1 (R1 = 4-CH3; R2 = -COOC2H5) < 4 (R1 = 4-CH3; R2 = -CH2COOCH3). All polynitrogenated heterocyclic esters proved to be thermally stable up to 250 °C in inert and oxidising conditions, although 1-3 were characterised by higher thermal stability compared to 4-6. The results confirmed that both the pyrolysis and the oxidative decomposition of heterocyclic ethyl formates/methyl acetates with para-substitutions at the phenyl moiety proceed according to the radical mechanism. In inert conditions, the pyrolysis process of the studied molecules occurred with the homolytic breaking of the C-C, C-N, and C-O bonds. This led to the emission of alcohol (ethanol in the case of 1-3 or methanol in the case of 4-6), NH3, HCN, HNCO, aldehydes, CO2, CH4, HCl, aromatics, and H2O. In turn, in the presence of air, cleavage of the C-C, C-N, and C-O bonds connected with some oxidation and combustion processes took place. This led to the emission of the corresponding alcohol depending on the analysed class of heterocyclic esters, NH3, HCN, HNCO, aldehydes, N2, NO/NO2, CO, CO2, HCl, aromatics, and H2O. Additionally, after some biological tests, it was proven that all nitrogen-rich heterocyclic esters-as potential drug candidates-are safe for erythrocytes, and some of them are able to protect red blood cells from oxidative stress-induced damage.

Thermal Investigations of Annelated Triazinones-Potential Analgesic and Anticancer Agents

In this article, for the first time, TG-DSC and TG-FTIR investigations of potential pharmaceutics, i.e., analgesic and anticancer active annelated triazinones (1-9) have been presented. The thermal behaviour of these molecules was established in oxidative and inert conditions. The solid-liquid phase transition for each compound (1-9) was documented by one sharp DSC peak confirming the high purity of each sample studied. All the molecules were characterised in terms of calorimetric changes and mass changes during their heating. They revealed high thermal stability in oxidative and inert conditions. The observed tendency in thermal stability changes in relation to a substituent present at the phenyl moiety was found to be similar in air and nitrogen. It was confirmed that annelated triazinones 1-9 were stable up to a temperature range of 241-296 °C in air, and their decomposition process proceeded in two stages under oxidative conditions. In addition, it was established that their thermal stability in air decreased in the following order of R at the phenyl moiety: 4-Cl > 3,4-Cl2 > H > 3-Cl > 4-CH3 > 2-CH3 > 3-CH3 > 2-Cl > 2-OCH3. The volatile decomposition products of the investigated molecules were proposed by comparing the FTIR spectra collected during their thermogravimetric analysis in nitrogen with the spectra from the database of reference compounds. None of annelated triazinones 1-9 underwent any polymorphic transformation during thermal studies. All the compounds proved to be safe for erythrocytes. In turn, molecules 3, 6, and 9 protected red blood cells from oxidative damage, and therefore may be helpful in the prevention of free radical-mediated diseases.

Thermal Decomposition Path-Studied by the Simultaneous Thermogravimetry Coupled with Fourier Transform Infrared Spectroscopy and Quadrupole Mass Spectrometry-Of Imidazoline/Dimethyl Succinate Hybrids and Their Biological Characterization

The thermal decomposition path of synthetically and pharmacologically useful hybrid materials was analyzed in inert and oxidizing conditions for the first time and presented in this article. All the imidazoline/dimethyl succinate hybrids (1-5) were studied using the simultaneous thermogravimetry (TG) coupled with Fourier transform infrared spectroscopy (FTIR) and quadrupole mass spectrometry (QMS). It was found that the tested compounds were thermally stable up to 200-208 °C (inert conditions) and up to 191-197 °C (oxidizing conditions). In both furnace atmospheres, their decomposition paths were multi-step processes. At least two major stages (inert conditions) and three major stages (oxidizing conditions) of their decomposition were observed. The first decomposition stage occurred between T_5% and 230-237 °C. It was connected with the breaking of one ester bond. This led to the emission of one methanol molecule and the formation of radicals capable of further radical reactions in both used atmospheres. At the second decomposition stage (T_max2) between 230-237 °C and 370 °C (inert conditions), or at about 360 °C (oxidizing conditions), the cleavage of the second ester bond and N-N and C-C bonds led to the emission of CH₃OH, HCN, N₂, and CO₂ and other radical fragments that reacted with each other to form clusters and large clusters. Heating the tested compounds to a temperature of about 490 °C resulted in the emission of NH₃, HCN, HNCO, aromatic amines, carbonyl fragments, and the residue (T_max2a) in both atmospheres. In oxidizing conditions, the oxidation of the formed residues (T_max3) was related to the production of CO₂, CO, and H₂O. These studies confirmed the same radical decomposition mechanism of the tested compounds both in inert and oxidizing conditions. The antitumor activities and toxicities to normal cells of the imidazoline/dimethyl succinate hybrids were also evaluated. As a result, the two hybrid materials (3 and 5) proved to be the most selective in biological studies, and therefore, they should be utilized in further, more extended in vivo investigations.

Hypolipidemic mechanism of Pleurotus eryngii polysaccharides in high-fat diet-induced obese mice based on metabolomics

Objective

In this study, the structure of Pleurotus eryngii polysaccharides (PEPs) was characterized, and the mechanism of PEP on obesity and hyperlipidemia induced by high-fat diet was evaluated by metabonomic analysis.

Methods

The structure of PEPs were characterized by monosaccharide composition, Fourier transform infrared spectroscopy and thermogravimetry. In animal experiments, H&E staining was used to observe the morphological difference of epididymal adipose tissue of mice in each group. Ultrahigh performance liquid chromatography (UHPLC)-(QE) HFX -mass spectrometry (MS) was used to analyze the difference of metabolites in serum of mice in each group and the related metabolic pathways.

Results

The PEPs contained nine monosaccharides: 1.05% fucose, 0.30% arabinose, 17.94% galactose, 53.49% glucose, 1.24% xylose, 23.32% mannose, 1.30% ribose, 0.21%galacturonic acid, and 1.17% glucuronic acid. The PEPs began to degrade at 251°C (T0), while the maximum thermal degradation rate temperature (Tm) appeared at 300°C. The results histopathological observation demonstrated that the PEPs had signifificant hypolipidemic activities. After PEPs intervention, the metabolic profile of mice changed significantly. A total of 29 different metabolites were selected as adjunctive therapy to PEPs, for treatment of obesity and hyperlipidemia-related complications caused by a high-fat diet. These metabolites include amino acids, unsaturated fatty acids, choline, glycerol phospholipids, and other endogenous compounds, which can prevent and treat obesity and hyperlipidemia caused by a high-fat diet by regulating amino acid metabolism, fatty acid metabolism, and changes in metabolic pathways such as that involved in the citric cycle (TCA cycle).

Conclusions

The presented results indicate that PEPs treatment can alleviate the obesity and hyperlipidemia caused by a high-fat diet and, thus, may be used as a functional food adjuvant, providing a theoretical basis and technical guidance for the prevention and treatment of high-fat diet-induced obesity and hyperlipidemia.

Review of the Application of Raman Spectroscopy in Qualitative and Quantitative Analysis of Drug Polymorphism

Drug polymorphism is an important factor affecting the drugs quality and clinical efficacy. Therefore, great attention should be paid to the crystal analysis of drugs with their researching and evaluating part. With the booming development of Raman spectroscopy in recent years, more and more crystal analysis investigations were based on vibrational spectroscopy. This review mainly discussed the qualitative and quantitative analysis of active pharmaceutical ingredients (API) and pharmaceutical preparation with Raman spectroscopy. On basis of the determination of the vibration mode of drug molecules and the analysis of their chemical structure, this method had the advantages of universal, non-destructive, fast determination, low samples and cost, etc. This review provides theoretical and technical support for crystal structure, which are worth popularizing. It is expected that it will be helpful to relevant government management institutions, pharmaceutical scientific research institutions and pharmaceutical manufacturers.

Physicochemical properties calculated using DFT method and changes of 5-methyluridine hemihydrate crystals at high temperatures

5-methyluridine hemihydrate (5 mU) single crystals were synthesized by the slow solvent evaporation method. The physicochemical properties, such as frontier molecular orbitals, global reactivity indices and vibrational were computationally studied through density functional theory (DFT). In addition, structural, vibrational, and thermal properties were obtained by powder X-ray diffraction (PXRD), Raman spectroscopy, thermogravimetric (TG) analysis and differential scanning calorimetry (DSC). PXRD evaluated the structural behavior of 5 mU crystal in the temperature range of 300-460 K. The high-temperature PXRD results suggested that the crystal undergoes two dehydration processes, being a first occurring from the orthorhombic structure (P2₁2₁2) to triclinic (P1), in which the water losses occurred around 380 K. A second dehydration triggers the change from the triclinic structure to monoclinic (P2₁) within the 420-435 K temperature range. Furthermore, after this temperature, the anhydrous 5 mU suffers a melting process near 460 K, which is remarkably characterized as an irreversible process. Raman spectroscopy was carried out to identify the vibrational modes linked to the water molecule and the noticeable changes in these bands due to high-temperature effects around 380 K and 410 K. Indeed, changes on Raman bands, such as intensity inversion, the disappearance of bands associated with the hydrogen bonds formed from the water molecules and uracil group, and the ribose group were observed. Finally, this study provided details on the structural and vibrational changes caused by the dehydration of 5 mU crystals and the importance of hydrogen bonds for understanding the intermolecular interactions of the 5 mU, a methylated nucleoside with important biological functions.

Pyrolysis of Aesculus chinensis Bunge Seed with Fe2O3/NiO as nanocatalysts for the production of bio-oil material

The rapid thermal cracking technology of biomass can convert biomass into bio-oil and is beneficial for industrial applications. Agricultural and forestry wastes are important parts of China's energy, and their high-grade utilization is useful to solve the problem of energy shortages and environmental pollution. To the best of our knowledge, the impact of nanocatalysts on converting biowastes for bio-oil has not been studied. Consequently, we examined the production of bio-oil by pyrolysis of Aesculus chinensis Bunge Seed (ACBS) using nanocatalysts (Fe₂O₃ and NiO catalysts) for the first time. The pyrolysis products of ACBS include 1-hydroxy-2-propanone (3.97%), acetic acid (5.42%), and furfural (0.66%). These chemical components can be recovered for use as chemical feedstock in the form of bio-oil, thus indicating the potential of ACBS as a feedstock to be converted by pyrolysis to produce value-added bio-oil. The Fe₂O₃ and NiO catalysts enhanced the pyrolysis process, which accelerated the precipitation of gaseous products. The pyrolysis rates of the samples gradually increased at DTG_max, effectively promoting the catalytic cracking of ACBS, which is beneficial to the development and utilization of ACBS to produce high valorization products. Combining ACBS and nanocatalysts can change the development direction of high valorization agricultural and forestry wastes in the future.

A Study on Circular Economy Material Using Fish Scales as a Natural Flame Retardant and the Properties of Its Composite Materials

Fish scales (FSs) are fishery wastes that can cause environmental pollution. This study aimed to solve this environmental problem. FSs were used as a flame retardant for polymer materials, making them valuable. Fish scales were combined with a commercial flame retardant, ammonium polyphosphate (APP), through synergistic effects to reduce the amount of commercial flame retardant. The use of FSs conforms to the concept of a circular economy and lowers costs by reducing the consumption of APP. Thermogravimetric analysis (TGA), integral procedural decomposition temperature (IPDT), pyrolysis kinetics, limiting oxygen index (LOI), the Underwriters Laboratories 94 (UL94) flammability test, scanning election microscopy, Raman spectroscopy, and energy-dispersive X-ray spectroscopy were used to determine the thermal properties, flame retardant properties, flame retardant mechanism, char morphology, and composition of the composites. The TGA results indicated that the addition of 40% flame retardant raised the char residue from 16.45 wt.% (pure EP) to 36.07 wt.%; IPDT from 685.6 °C (pure EP) to 1143.1°C; LOI from 21% (pure EP) to 30%; and UL94 classification from fail (pure EP) to V-0. These results suggest an increase in char residue, which indicates better protection of the polymer matrix material. The improvements in IPDT, LOI, and UL94 classification, which indicate greater thermal stability, lower flammability (from flammable to fireproof), and higher flammability rating (from fail to V-0), respectively, suggest that the composite material has favorable thermal properties and is less inflammable.

Characterization of Chinese hamster ovary cell culture feed media precipitate

Process intensification of monoclonal antibody production is leading to more concentrated feed media causing issues with precipitation of solids from the media solution. This results in processing problems since components in the precipitate are no longer in solution, changing the media composition and leading to variability in cell culture performance. The goal of this work is to characterize the feed media precipitate, and in particular to identify the precipitated components so that mitigation strategies can be developed. From the conducted analysis, the precipitate was predominately found to be organic and was analyzed with liquid chromatography-mass spectrometry and inductively coupled plasma-optical emission spectroscopy (ICP-OES) to identify the constituent components. Up to ten amino acids were identified with tyrosine (approximately 77 wt.%) and phenylalanine (approximately 4 wt.%) being the most prevalent amino acids. Elemental analysis with ICP-OES revealed that inorganic components were accounted for less than one weight percentage of the solid precipitate with metal sulfates being the predominant inorganic components.

Thermodynamic and kinetic studies on the polymorphic transformations of puerarin hydrates

Puerarin (PUE), a bioactive flavonoid from the plant Pueraria lobata, exists in two hydrated forms: monohydrate (PUEMH) and dihydrate (PUEDH). The aim of the present work was to explore the thermodynamic and kinetic mechanism of the polymorphic transformation of PUE, including the solvent-mediated polymorphic transformation (SMPT) of PUEMH to PUEDH and the solid-state polymorphic transformations (SSPTs) of PUEMH and PUEDH. PUEMH and PUEDH were identified as isolated and channel hydrate, respectively. The thermodynamic parameters (ΔG < 0, ΔH < 0, and ΔS < 0) indicated that the SMPT was a spontaneous, exothermic and entropy-decreased reaction. The facilitating roles of stirring rate and temperature on the SMPT were favored by the primary and secondary nucleation process of PUEDH. In addition, the results of SSPTs suggested that PUEMH and PUEDH would transform to two different anhydrates (PUEAH-I and PUEAH-II) upon heating, respectively. The dehydration rate of PUEMH was slower than that of PUEDH due to the stronger hydrogen bond interactions. The rate-limiting step for the dehydration of PUEMH was the diffusion of water molecules, resulting in the increased dehydration activation during the dehydration process, while the dehydration activation energy of PUEDH showed opposite trend due to the complicated crystallization process of PUEAH-II.

Monitoring the Isothermal Dehydration of Crystalline Hydrates Using Low-Frequency Raman Spectroscopy

Detection of the solid-state forms of pharmaceutical compounds is important from the drug performance point of view. Low-frequency Raman (LFR) spectroscopy has been demonstrated to be very sensitive in detecting the different solid-state forms of pharmaceutically relevant compounds. The potential of LFR spectroscopy to probe the in situ isothermal dehydration was studied using piroxicam monohydrate (PXM) and theophylline monohydrate (TPMH) as the model drugs. The dehydration of PXM and TPMH at four different temperatures (95, 100, 105, and 110 °C and 50, 60, 70, and 80 °C, respectively) was monitored in both the low- (20-300 cm^-1) and mid-frequency (335-1800 cm^-1) regions of the Raman spectra. Principal component analysis and multivariate curve resolution were applied for the analysis of the Raman data. Spectral differences observed in both regions highlighted the formation of specific anhydrous forms of piroxicam and theophylline from their respective monohydrates. The formation of the anhydrous forms was detected on different timescales (approx. 2 min) between the low and mid-frequency Raman regions. This finding highlights the differing nature of the vibrations being detected between these two spectral regions. Computational simulations performed were also in agreement with the experimental results, and allowed elucidating the origin of different spectral features.

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing

Three-dimensional (3D) printing technologies are widely applied in various industries and research fields and are currently the subject of intensive investigation and development. However, high-performance materials that are suitable for 3D printing are still in short supply, which is a major limitation for 3D printing, particularly for biomedical applications. The physicochemical properties of single constituent materials may not be sufficient to meet the needs of modern biotechnology development and production. To enhance the materials' performance and broaden their applications, this work designed and tested a series of titanate nanofiller (nanowire and nanotube)-enhanced polycaprolactone (PCL) composites that were 3D-printable and provided superior mechanical properties. By grafting two different functional groups (phenyl- and thiol-terminated ligands), the nanofiller surface showed improved hydrophobicity, which significantly improved their dispersion in the PCL matrix. After characterizing the surface modification, we evaluated the significance of the homogeneity of the ceramic nanofiller in terms of printability, formability, and mechanical strength. Melt electrowriting additive manufacturing was used to fabricate microfibers of PCL and PCL/nanofiller composites. Improved nanofiller dispersion enabled intact and uniform sample morphology, and in contrast, nanofiller aggregation greatly varied the viscosity during the printing process, which could result in poorly printed structures. Importantly, the modified ceramic/PCL composite delivered enhanced and stable mechanical properties, where its Young's modulus was measured to be 1.67 GPa, which is more than 7 times higher compared to that of pristine PCL (0.22 GPa). Retaining the cell safety properties (comparable to PCL), the concept of enhancing biocompatible polymers with modified nanofillers shows great potential in the field of customized 3D printing for biomedicine.

Pharmaceutical Hydrates Analysis-Overview of Methods and Recent Advances

This review discusses a set of instrumental and computational methods that are used to characterize hydrated forms of APIs (active pharmaceutical ingredients). The focus has been put on highlighting advantages as well as on presenting some limitations of the selected analytical approaches. This has been performed in order to facilitate the choice of an appropriate method depending on the type of the structural feature that is to be analyzed, that is, degree of hydration, crystal structure and dynamics, and (de)hydration kinetics. The presented techniques include X-ray diffraction (single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD)), spectroscopic (solid state nuclear magnetic resonance spectroscopy (ssNMR), Fourier-transformed infrared spectroscopy (FT-IR), Raman spectroscopy), thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TGA)), gravimetric (dynamic vapour sorption (DVS)), and computational (molecular mechanics (MM), Quantum Mechanics (QM), molecular dynamics (MD)) methods. Further, the successful applications of the presented methods in the studies of hydrated APIs as well as studies on the excipients' influence on these processes have been described in many examples.

Thermally induced cyclization of L -isoleucyl-L -alanine in solid state: Effect of dipeptide structure on reaction temperature and self-assembly

Thermal treatment of short-chain oligopeptides is able to initiate the process of their self-assembly with the formation of organic nanostructures with unique properties. On the other hand, heating can lead to a chemical reaction with the formation of new substances with specific properties and ability to form structures with different morphology. Therefore, in order to have a desired process, researcher needs to find its temperature range. In the present work, cyclization of _L -isoleucyl-_L -alanine dipeptide in the solid state upon heating was studied. Kinetic parameters of this reaction were estimated within the approaches of the nonisothermal kinetics. The correlation between side chain structure of dipeptides and temperature of their cyclization in the solid state was found for the first time. This correlation may be used to predict the temperature, at which dipeptide self-assembly changes to chemical reaction. The differences in self-assembly of linear and cyclic dipeptides were demonstrated using atomic force microscopy. The effect of dipeptide concentration in a source solution and an organic solvent used on self-assembly of dipeptides was shown. The new information obtained on the thermal properties and self-assembly of linear and cyclic forms of _L -isoleucyl-_L -alanine may be useful for the design of new nanomaterials based on oligopeptides, as well as for the synthesis of cyclic oligopeptides.

Solid-State Characterization of Different Crystalline Forms of Sitagliptin

Sitagliptin is an inhibitor of the enzyme dipeptidyl peptidase-4, used for the treatment of type 2 diabetes mellitus. The crystal structure of active pharmaceutical solids determines their physical and chemical properties. The polymorphism, solvates and hydrates can influence the free energy, thermodynamic parameters, solubility, solid-state stability, processability and dissolution rate, besides directly affecting the bioavailability. Thus, the physicochemical characterization of an active pharmaceutical ingredient is required to guarantee the rational development of new dosage forms. In this context, we describe herein the solid-state characterization of three crystalline forms of sitagliptin: sitagliptin phosphate monohydrate, sitagliptin phosphate anhydrous and sitagliptin base form. The investigation was carried out using differential scanning calorimetry (DSC), thermogravimetry (TG)/derivative thermogravimetry (DTG), spectroscopic techniques, X-ray powder diffraction (XRPD) and morphological analysis by scanning electron microscopy. The thermal analysis revealed that during the dehydration of sitagliptin phosphate monohydrate (Tpeak = 134.43 °C, ΔH = -1.15 J g-1) there is a characteristic crystalline transition event, which alters the physicochemical parameters of the drug, such as the melting point and solubility. The crystalline behavior of sitagliptin base form differs from that of sitagliptin phosphate monohydrate and sitagliptin phosphate anhydrous, mainly with regard to the lower temperature of the fusion event. The melting point (Tpeak) values obtained were 120.29 °C for sitagliptin base form, 206.37 °C for sitagliptin phosphate monohydrate and 214.92 °C for sitagliptin phosphate anhydrous. In relation to the thermal stability, sitagliptin phosphate monohydrate and sitagliptin phosphate anhydrous showed a slight difference; however, both are more thermostable than the base molecule. Therefore, through this study it was possible to establish the most suitable crystalline form of sitagliptin for the development of a safe, effective and appropriate pharmaceutical dosage form.

Study on the kinetic model, thermodynamic and physicochemical properties of Glycyrrhiza polysaccharide by ultrasonic assisted extraction

The extraction process of crude polysaccharides from Glycyrrhiza (GP) by ultrasonic assisted hot water method was established according to the optimized kinetic model based on Fick's second law of diffusion, and thermodynamic action was analyzed. Physicochemical properties of GP including the apparent viscosity, thermostability and antioxidant activities etc. were determined by ultraviolet spectrophotometry and differential scanning calorimetry (DSC). Characteristic function groups and surface structure also were analyzed by Fourier infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The results showed the extraction kinetic curves of GP showed good linear correlation with the linear correlation coefficients (R²) of equal or greater than 0.90 based on Fick's second law of diffusion, and the maximum yield of 3.53% was obtained at 343.15 K and ultrasonic power 600 W with material-liquid ratio of 1:15 for 60 min. Gibbs free energy change (ΔG_m > 0) indicated that the extraction process was endergonic and not spontaneous. GP was confirmed a kind of acidic pyran polysaccharide with small bubble-like holes internally. The GP viscosity increased with the increase of concentration and then gradually decreased with the enhancement of shear rate. GP showed good thermal stability along with two stages of mass loss by DSC analysis. The antioxidant activity experiments suggested that the higher the concentration of GP, the stronger its reduction power.