Prefabricated fibula free flap with dental implants for mandibular reconstruction

The Implant-borne Articulation Splint in Fibula Free Flap Mandibular Reconstruction: A Technical Note

Computer-aided design and computer-aided manufacturing and digitally simulated surgeries have revolutionized maxillomandibular reconstruction. In particular, this technology has increased the accuracy and facilitated the process of dental implantation in fibula free flaps. Despite the efficacy of virtual planning, there is a minor degree of translational difference between digital and intraoperative measurements, which may affect the precision of implant and fibula orientations. This is especially concerning during the last stage of fibula insetting, where the graft segments have the potential to roll, yaw, or pitch. The objective of this study is to describe an advanced prosthodontic technique that ensures the fibula grafts and implants remain in a restorable position during final insetting. We describe the technique and workflow of the implant-borne articulation splint through a case presentation and demonstrate results at 4 months postoperative and postradiotherapy. Given the degree of investment placed in virtual planning, free flap reconstruction, and endosteal implants, a technique that ensures optimal restorability of each implant is pivotal. Larger studies are still required to fully elucidate the cost-effectiveness and long-term results of the implant-borne articulation splint.

The role of folded fibular flap in patients' reconstruction of mandibular defects: a retrospective clinical study

This study has analyzed 41 patients with mandibular ameloblastoma who underwent a partial mandibulectomy and reconstruction by folding the free fibular flap. In the preoperative and postoperative (6 months and 24 months after surgery), the Quality of Life (QOL) of these patients was assessed by using the University of Washington Quality of Life Questionnaire (UW-QOL) and the medical outcome study short form-36 (SF-36) questionnaires. SPSS 20.0 statistical software was used to conduct statistical analysis on the base data of the two groups of patients. Independent sample t test was conducted for sf-36 and UW-QOL scores at two time points in each group. The SF-36 survey showed that body pain (54.54 ± 8.10), general health (55.27 ± 7.54), and health changes (58.29 ± 9.60) decreased significantly at 6 months after surgery, but the mean score at 24 months after surgery all exceeded the preoperational level. At 24 months after the surgery, the vitality (80.41 ± 3.74), social function (81.61 ± 4.07), emotional role (82.39 ± 4.07), psychological health (81.66 ± 4.37) and total score (704.00 ± 31.53) all returned to the preoperative level, which was statistically significant compared with 6 months after surgery. However, there was no significant difference compared with the preoperative level. The UW-QOL survey showed that chewing (56.68 ± 7.23), speech (54.54 ± 7.7) and taste (62.29 ± 10.15) have significantly changed at 6 months after the surgery, and the difference was statistically significant at 24 months after surgery. Saliva generation decreased slightly (80.76 ± 3.35) at 6 months after surgery, but quickly returned to the preoperative level (81.59 ± 4.06). The total score of the patients almost recovered to the preoperative level at 24 months after surgery. The folded the fibular flap can not only repair the defects of soft tissue and bone tissue, but also restore the height of the alveolar ridge to, avoid the imbalance of crown and root ratio after implantation and reduce the occurrence of peri-implant inflammation, so that a true functional reconstruction can be realized.

Segmental mandibular reconstruction in patients with poor lower extremity perfusion, vessel-depleted necks and/or profound medical frailty

PURPOSE OF REVIEW

Options for segmental mandibular reconstruction in patients poorly suited to undergo fibula free flap (FFF).

RECENT FINDINGS

Although FFF is the current 'gold standard' for segmental mandibular reconstruction, other reconstructive options must be considered when FFF is contraindicated or disfavoured and/or patient frailty precludes a lengthy anaesthetic. In addition to various nonvascularized and soft tissue only reconstructions, excellent osseous free flap alternatives for functional segmental mandibular reconstruction may be employed. The subscapular system free flaps (SSSFF) may be ideal in frail and/or elderly patients, as SSSFF allows for early mobility and does not alter gait. In extensive and/or symphyseal defects, functional mandibular reconstruction in lieu of a free flap is extremely limited. Pedicled segmental mandibular reconstructions remain reasonable options, but limited contemporary literature highlights unpredictable bone graft perfusion and poor long-term functional outcomes.

SUMMARY

There are several excellent free flap alternatives to FFF in segmental mandibular reconstruction, assuming adequate cervical recipient vessels are present. On the basis of the current literature, the optimal mandibular reconstruction for the medically frail, elderly and/or patients with extreme vessel-depleted necks is limited and debatable. In qualifying (i.e. limited, lateral) defects, soft tissue only reconstructions should be strongly considered when osseous free flaps are unavailable.

Maxillofacial reconstruction with prefabricated prelaminated osseous free flaps

BACKGROUND

The prefabricated fibula flap is an advanced method of occlusal-based reconstruction that combines placement of osseointegrated dental implants with prelamination, using a split skin graft on the fibula, weeks prior to the definitive reconstruction. This approach is resource intensive but has several advantages including eliminating the delay from reconstruction to dental rehabilitation.

METHODS

A retrospective cohort study of all prefabricated fibula flaps used for mandible and maxillary reconstruction from 2012 to 2020 was performed. Outcome measures were implant survival, implant utilization and functional dental rehabilitation.

RESULTS

A total of 17 prefabricated fibula flaps were performed including two analogue and 15 digital plans. There were nine maxillary and eight mandibular reconstructions, of which 11 were primary and seven were secondary. There were no free flap failures. A total of 65 implants were placed (average 3.8, median 3 implants). There was one implant failure at 6 years giving a 1.5% failure rate. There was 91% implant utilization and 94% functional dental rehabilitation.

CONCLUSION

The prefabricated fibula flap provides outstanding dental rehabilitation in well-selected patients.

Jaw in a day: Osseointegration of the implants in the patient's leg before reconstructive surgery of a maxilla with ameloblastoma. A 4-year follow-up case report

Background

To describe a clinical case of a cancer patient who underwent ablative tumor surgery, including treatment planning, surgical resection and subsequent implant rehabilitation.

Case Report

A 61-year-old patient with a diagnosis of multicystic follicular ameloblastoma in the maxilla, in which it was necessary a multidisciplinary approach and two surgical steps. In the first surgical intervention osseointegrated implants (OII) were placed in the fibula, until their osseointegration period of 8 weeks was complete. Afterwards, in the second surgery, the micro-vascularized free fibular flap bearing the implants was transplanted into the oral cavity, in order to perform simultaneous reconstruction and early rehabilitation. The final prosthetic rehabilitation consisted in a hybrid prosthesis fabricated using CAD CAM technology.

Results

The latest advances in medical research have improved our understanding of the oral cavity's regenerative capacity after oncological treatment. This, aided by the advances in digital 3D technologies, has allowed meticulous treatment planning prior surgery.

Conclusions

The functional and esthetic reconstructions described in these two case reports were made possible by coordinating multidisciplinary approaches involving dentists and oral and maxillofacial surgeons. Advances in medicine have improved understanding of the regenerative capacity of the oral region following oncologic treatment, facilitating meticulous advance planning, while advances in digital 3D technologies for planning make it possible to reduce the number of surgical sessions and the time taken for the patient to recover both the esthetics and function of the stomatognathic system. Key words:Oral rehabilitation, oral cancer, oral surgery.

The accuracy of different modalities of perforator mapping for unilateral DIEP flap breast reconstruction: A systematic review and meta-analysis

BACKGROUND

Perforator mapping may be performed prior to deep inferior epigastric perforator (DIEP) flap breast reconstruction to guide perforator selection. However, the accuracy of different imaging modalities remains unknown. This review aimed to evaluate the accuracy of different modalities for locating perforators for unipedicled DIEP flap breast reconstruction.

METHODS

MEDLINE and EMBASE were searched from inception to 24th September 2019 for studies concerning adult women undergoing DIEP flap breast reconstruction with preoperative perforator mapping. The index test was pre-operative imaging and the reference standard was intraoperative identification.

RESULTS

21 articles with 1146 women were included. Six methods were described; handheld doppler, colour doppler (duplex) ultrasonography, computed tomography angiography, magnetic resonance angiography (MRA), direct infrared thermography with and without doppler. Meta-analysis revealed 94% (95% CI 88-99%) of DIEPs identified as the 'dominant perforator' on imaging were chosen as dominant perforators intraoperatively. Colour doppler (Duplex) ultrasonography had the lowest agreement (mean 74% [95% CI 67-81%]) whilst MRA had the highest agreement (mean 97% [95% CI 86-100%]). There was no statistically significant difference in the performance of different tests. All studies were subject to bias as the operators had knowledge of the index test prior to conducting the reference standard.

CONCLUSIONS

Based upon limited evidence, cross sectional (CT/MR) imaging modalities for preoperative DIEP mapping appear to have similar accuracy and perform better than ultrasound.

Evaluation of Effective Condyle Positioning Assisted by 3D Surgical Guide in Mandibular Reconstruction Using Osteocutaneous Free Flap

In the present study, the reproducibility and postoperative stability of a 3D printed surgical guide were evaluated in mandibular reconstruction with an osteocutaneous free flap (OCFF), including a fibular free flap (FFF) and deep circumflex iliac artery free flap (DCIA). Fifteen patients were enrolled, and a 3D surgical guide was fabricated by simulation surgery using preoperative (T0) Computed tomography (CT) images. Mandibular reconstruction was performed with OCFF using the 3D surgical guide. Postoperative CTs were taken immediately, 1 week (T1), and 6 months (T2) after surgery, to evaluate the reproducibility of the 3D surgical guide and condyle stability. Error of the 3D surgical guide ranged from 0.85 to 2.56 mm. There were no differences in reproducibility according to flap type. Condylar error and error at mandible midpoint were significantly different in FFF. However, there was no difference in DCIA error between the condyle and mandible midpoint. Regarding condyle stability 6 months after surgery, condyles moved more than 2 mm (up to 2.85 mm) in FFF, whereas there were no significant movement in DCIA. Careful intraoperative flap fixation and closed postoperative observation should be considered for stable clinical outcome, especially in the case of FFF.

Osseointegration effect of biomimetic intrafibrillarly mineralized collagen applied simultaneously with titanium implant: A pilot in vivo study

OBJECTIVES

To investigate the promoting effects of biomimetic intrafibrillarly mineralized collagen (IMC) bone scaffold material on the osseointegration of a titanium implant simultaneously grafted into a critical-sized bone defect as well as the underlying mechanisms involved.

MATERIALS AND METHODS

A critical-sized bone defect was created in the rat femur, and a titanium (Ti) implant surrounded by IMC or extrafibrillarly mineralized collagen (EMC) bone scaffold material was placed in the defect. A blank group and a natural bone group were included as controls. Osseointegration was assessed by micro-computed tomographic, histological, and biochemical evaluations at 12 weeks postoperatively. Microarray technology was applied for transcriptional profile analysis at days 7 and 14 postoperatively.

RESULTS

Significant bone regeneration and osseointegration were observed in the IMC and EMC groups according to μ-CT and histological analyses. The bone volume (BV)/total volume (TV) fraction, bone-to-implant contact percentage, and bone area percentage as well as ultimate shear strength and maximal pull-out force were all significantly higher in the IMC group than in the EMC group (all p < 0.05). Transcriptional analysis revealed overexpression of genes mainly associated with cell proliferation, immuno-inflammatory response, skeletogenesis, angiogenesis, neurogenesis, and skeletogenesis-related pathways during the early process of osseointegration in the IMC group.

CONCLUSION

Our data suggest that IMC placed simultaneously with a Ti implant may be a promising strategy in jawbone defect reconstruction. Several candidate genes that were found to be differentially expressed in the IMC group may be responsible for the superior osseointegration effects in this model.

Condyle dislocation following mandibular reconstruction using a fibula free flap: complication cases

Background

Condylar dislocation can arise as a complication in patients who required mandibular and/or condylar reconstruction and were operated on with fibula free flap (FFF) using surgical guides designed using simulation surgery. Surgeons should be aware of the complications in these present cases when planning and performing reconstructions as well as predicting prognoses.

Cases presentation

Two cases showed condylar dislocation in mandibular reconstruction using a FFF fixed with a reconstruction plate. Three cases showed condylar dislocation in mandibular reconstruction using a fibula free flap fixed with a mini-plate.

Conclusion

Despite the lack of clinical symptoms in these cases following mandibular reconstruction using an FFF, the mandibular condyle was severely displaced away from the glenoid fossa. A surgeon must have sufficient time to consider the use of a long flap with thickness similar to that of the mandible, ways to minimize span and bending, and methods of fixation. The patient, moreover, should be educated on condylar dislocation. Customized CAD/CAM-prototyped temporomandibular condyle-connected plates may be a good alternative even if virtual simulation surgery is to be performed before surgery. These considerations may help reduce the incidence of complications after mandibular reconstruction.

[CAD/CAM Revolution in Craniofacial Reconstruction]

CAD/CAM Revolution in Craniofacial Reconstruction Abstract. The face is an important part of the personality and at the same time fulfils a variety of tasks. Aesthetics and function form a unique unit. The formation of the field of oral and maxillofacial surgery began in the first decades of the last century. It includes the prevention, diagnosis, therapy and rehabilitation of diseases, injuries, malformations and changes of the complex structures of the face, oral cavity, jaw and teeth. In the meantime, oral and maxillofacial surgery has arrived in the 21st century. Today's oral and maxillofacial surgery is a link between medicine and dentistry and a protagonist in the implementation of digital workflows in clinical care. Individual solutions with patient-specific implants are the rule, computer-assisted techniques support the surgeon in the planning and performing of surgical procedures. This article intends to give you an insight into how our patients benefit from advanced technologies.