The starch modified montmorillonite for the removal of Pb(II), Cd(II) and Ni(II) ions from aqueous solutions

Enhanced Removal of Cd(II) Ions from Aqueous Media via Adsorption on Facilely Synthesized Copper Ferrite Nanoparticles

In this study, magnetic copper ferrite (CuFe2O4) nanoparticles were synthesized via the Pechini sol-gel method and evaluated for the removal of Cd(II) ions from aqueous solutions. PF600 and PF800 refer to the samples that were synthesized at 600 °C and 800 °C, respectively. Comprehensive characterization using FTIR, XRD, FE-SEM, HR-TEM, and EDX confirmed the successful formation of CuFe2O4 spinel structures, with crystallite sizes of 22.64 nm (PF600) and 30.13 nm (PF800). FE-SEM analysis revealed particle diameters of 154.98 nm (PF600) and 230.05 nm (PF800), exhibiting spherical and irregular shapes. HR-TEM analysis further confirmed the presence of aggregated nanoparticles with average diameters of 52.26 nm (PF600) and 98.32 nm (PF800). The PF600 and PF800 nanoparticles exhibited exceptional adsorption capacities of 377.36 mg/g and 322.58 mg/g, respectively, significantly outperforming many materials reported in the literature. Adsorption followed the Langmuir isotherm model and pseudo-second-order kinetics, indicating monolayer adsorption and strong physisorption. The process was spontaneous, exothermic, and predominantly physical. Reusability tests demonstrated high adsorption efficiency across multiple cycles when desorbed with a 0.5 M ethylenediaminetetraacetic acid (EDTA) solution, emphasizing the practical applicability of these nanoparticles. The inherent magnetic properties of CuFe2O4 facilitated easy separation from the aqueous medium using a magnet, enabling efficient and cost-effective recovery of the adsorbent. These findings highlight the potential of CuFe2O4 nanoparticles, particularly PF600, for the effective and sustainable removal of Cd(II) ions from water.

Optimization of LDO-Pectin Synthesis Conditions for the Removal of Metals from Wastewater: A Comparison of Response Surface Methods and Taguchi Approaches

With the continuous growth of industrialization, the presence of heavy metals (HMs) in the environment has become a critical issue, necessitating cost-effective and efficient techniques for their removal. The present study aimed to determine the optimal preparation conditions for synthesizing pectin (PC) as a polymer sorbent, combined with Magnesium (Mg) Aluminum (Al) layered double oxides (LDOs), using a fast and facile co-precipitation method. Both the response surface method (RSM) and the Taguchi method were employed to optimize the influence of key independent variables, including the molar ratio of cations Mg:Al, the ratio of pectin to LDO, and the temperature for removing multiple elements from wastewater. The results indicated that RSM is more accurate and examines more interactions, while Taguchi reduces the number of tests and is more economical than RSM. However, both statistical methods showed good potential for predicting the adsorption capacity (Qe) of HMs. The optimal preparation conditions were identified as a molar ratio of 3:1, a ratio of pectin to LDO of 7% w/w, and a temperature of approximately 600 °C. In conclusion, the application of RSM and Taguchi approaches was found to be feasible and effective in optimizing the preparation conditions of modified LDO, which can be utilized as a potential adsorbent for removing multiple elements from wastewater.

Modeling, optimization and efficient use of MMT K10 nanoclay for Pb (II) removal using RSM, ANN and GA

Regarding the long-term toxic effects of Pb (II) ions on human health and its bioaccumulation property, taking measures for its reduction in the environment is necessary. The MMT-K₁₀ (montmorillonite-k₁₀) nanoclay was characterized by XRD, XRF, BET, FESEM, and FTIR. The effects of pH, initial concentrations, reaction time, and adsorbent dosage were studied. The experimental design study was carried out with RSM-BBD method. Results prediction and optimization were investigated with RSM and artificial neural network (ANN)-genetic algorithm (GA) respectively. The RSM results showed that the experimental data followed the quadratic model with the highest regression coefficient value (R² = 0.9903) and insignificant lack of fit (0.2426) showing the validity of the Quadratic model. The optimal adsorption conditions were obtained at pH 5.44, adsorbent = 0.98 g/l, concentration of Pb (II) ions = 25 mg/L, and reaction time = 68 min. Similar optimization results were observed by RSM and artificial neural network-genetic algorithm methods. The experimental data revealed that the process followed the Langmuir isotherm and the maximum adsorption capacity was 40.86 mg/g. Besides, the kinetic data indicated that the results fitted with the pseudo-second-order model. Hence, the MMT-K₁₀ nanoclay can be a suitable adsorbent due to having a natural source, simple and inexpensive preparation, and high adsorption capacity.

Highly selective adsorption of Hg (II) from aqueous solution by three-dimensional porous N-doped starch-based carbon

For the first time, N-doped carbon materials with 3D porous-layered skeleton structure was synthesized through a one-step co-pyrolysis method, which was fabricated by co-pyrolysis of natural corn starch and melamine using metal catalysts (Ni (II) and Mn (II)). The 3D-NC possessed a heterogeneously meso-macroporous surface with a hierarchically connected sheet structure inside. Batch adsorption experiments suggested that highly selective adsorption of Hg (II) by the 3D-NC could be completed within 90 min and had maximum adsorption capacities as high as 403.24 mg/g at 293 K, pH = 5. The adsorption mechanism for Hg (II) was carefully evaluated and followed the physical adsorption, electrostatic attraction, chelation, and ion exchange. Besides, thermodynamic study demonstrated that the Hg (II) adsorption procedure was spontaneous, endothermic, and randomness. More importantly, the 3D-NC could be regenerated and recovered well after adsorption-desorption cycles, showing a promising prospect in the remediation of Hg (II)-contaminated wastewater.

Chitosan grafted tetracarboxylic functionalized magnetic nanoparticles for removal of Pb(II) from an aqueous environment

In this study, the chitosan-grafted tetracarboxylic functionalized magnetic nanoparticle (Fe₃O₄@TCA@CS) was synthesized via in situ co-precipitation process and amidation reaction to improve efficiency of adsorption process and obtain cost-effective adsorbents for removal of toxic Pb(II) metal from aqueous environment. The Fe₃O₄@TCA@CS nanocomposite was analyzed by FTIR, TEM-EDX, TGA, XRD, BET, and Zeta potential. The performance of Fe₃O₄@TCA@CS for Pb(II) ions adsorption was achieved as a function of pH, dose, contact time, initial Pb(II) concentration, and temperature. The influence of coexisting ions such as Na⁺, Ca²⁺, Mg²⁺, and Cd²⁺on removal efficiency of Pb(II) was also investigated. The results revealed that the coexisting ions had little influence on Pb(II) removal efficiency. The pseudo-first-order and Freundlich models were better to describe the adsorption of Pb(II) onto Fe₃O₄@TCA@CS and the maximum adsorption capacity of Pb(II) was 204.92 mg/g at pH:5.5; adsorbent dose: 0.015 g; and temperature: 298 K. Thermodynamic studies revealed that the Pb(II) adsorption onto Fe₃O₄@TCA@CS was an exothermic process. In conclusion, the study provides a new, simple, low-cost, and effective chitosan-based magnetic nanocomposite as a promising adsorbent with excellent adsorption capacity, magnetic separation, and reusability for Pb(II) removal from an aqueous environment.

Sulfhydryl Functionalized Magnetic Chitosan as an Efficient Adsorbent for High-Performance Removal of Cd(II) from Water: Adsorption Isotherms, Kinetic, and Reusability Studies

In this study, dimercaptosuccinic acid-functionalized magnetic chitosan (Fe3O4@CS@DMSA) was synthesized via in situ coprecipitation process and amidation reaction, aiming to eliminate cadmium (Cd(II)) ions from an aqueous environment. The structure, morphology, and particle size of the Fe3O4@CS@DMSA adsorbent were investigated using FTIR, TEM, EDX, TGA, zeta potential, and XRD techniques, and the obtained results approved the successful synthesis of the Fe3O4@CS@DMSA nanocomposite. The influence of external adsorption conditions such as pH solution, adsorbent mass, initial Cd(II) concentration, temperature, and contact time on the adsorption process was successfully achieved. Accordingly, pH: 7.6, contact time: 210 min, and adsorbent mass:10 mg were found to be the optimal conditions for best removal. The adsorption was analyzed using nonlinear isotherm and kinetic models. The outcomes revealed that the adsorption process obeyed the Langmuir and the pseudo-first-order models. The maximum adsorption capacity of Fe3O4@CS@DMSA toward Cd(II) ion was 314.12 mg/g. The adsorption mechanism of Cd(II) on Fe3O4@CS@DMSA nanocomposite is the electrostatic interaction. The reusability test of Fe3O4@CS@DMSA nanocomposite exhibited that the adsorption efficiency was 72% after the 5th cycle. Finally, this research indicates that the Fe3O4@CS@DMSA exhibited excellent characteristics such as high adsorption capacity, effective adsorption-desorption results, and easy magnetic separation and thus could be an effective adsorbent for removing Cd(II) ions from aqueous solutions.

Deciphering the adsorption potential of a functionalized green hydrogel nanocomposite for aspartame from aqueous phase

Herein, a functionalized green hydrogel nanocomposite based on carboxymethylated gum tragacanth and nanobentonite (GTBCH) was designed via free-radical polymerization approach for the elimination of Aspartame (AS) from wastewater. The GTBCH fabrication was validated by Fourier Transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) techniques. Central composite design (CCD) was efficaciously applied to determine the quadratic polynomial approach for predicting the adsorption capacity (q_e) of AS. The optimum sequestration conditions were dosage (0.8 g L^‒1), agitation time (35 min) initial AS concentration (60 mg L^-1), pH (6) and temperature (308 K). The CCD results revealed that dosage of GTBCH and initial concentration have greater impact on q_e followed by pH, time, and temperature. The significant adsorption capacity (392.04 mg g^-1), calculated from Langmuir model, could be attributed to the stronger interactions prevalent between AS and GTBCH. Diffusion investigations depicted the uptake of AS via surface adsorption, liquid film and intraparticle diffusion, respectively. Ionic strength and real water have minor effect on the adsorption capacity demonstrating electrostatic interaction has least impact in adsorption process. The pHzpc, FTIR and XPS investigations revealed hydrogen bonding, n-π and van der Waals interactions as the principal removal mechanisms. Robust design, high adsorption capacity, eco-friendly facets along with excellent reusability indicated the GTBCH as a competent adsorbent for AS decontamination from wastewater.

Effectiveness of photocatalysis of MMT-supported TiO2 and TiO2 nanotubes for rhodamine B degradation

The aim of this paper is to synthesize montmorillonite/TiO₂-nanoparticles (MMT/TiO₂ and montmorillonite/TiO₂-nanotubes (MMT/TiO_2-NTs) photocatalysts through a simple wet agitation method based on TiO₂ nanoparticles and MMT. They are likely to accumulate the effect of adsorption and photodegradation. Then, the photocatalysts are applied to degrade the rhodamine B in dye effluents. The structural characterizations of photocatalysts are investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDX). The photocatalytic activities and effectiveness of photocatalysts are evaluated through rhodamine B degradation at different concentrations under dark and UV-C irradiation conditions. The results show that the synthesized TiO_2-NTs have an average tube diameter of 5 nm and a tube length at least about 110 nm, which are intercalated into MMT sheets in MMT/TiO_2-NTs photocatalyst. Meanwhile, TiO₂ nanoparticles are immobilized on the surface of MMT sheets in the MMT/TiO₂ photocatalyst. The photocatalytic effectiveness of rhodamine B degradation of TiO_2-NTs shows a significantly enhance compared to that of TiO₂ nanoparticles. However, photocatalytic performance of MMT/TiO_2-NTs is lower than that of MMT/TiO₂. The degradation effectiveness of MMT/TiO₂ photocatalyst reaches to 100% for 3 ppm and 90% at 10 ppm of rhodamine B, while these values are 97.5% and 85.5%, respectively, recorded for MMT/TiO_2-NTs.

Medical Plant Extract Purification from Cadmium(II) Using Modified Thermoplastic Starch and Ion Exchangers

Pure compounds extracted and purified from medical plants are crucial for preparation of the herbal products applied in many countries as drugs for the treatment of diseases all over the world. Such products should be free from toxic heavy metals; therefore, their elimination or removal in all steps of production is very important. Hence, the purpose of this paper was purification of an extract obtained from Dendrobium officinale Kimura et Migo and cadmium removal using thermoplastic starch (S1), modified TPS with poly (butylene succinate); 25% of TPS + 75% PBS (S2); 50% of TPS + 50% PLA (S3); and 50% of TPS + 50% PLA with 5% of hemp fibers (S4), as well as ion exchangers of different types, e.g., Lewatit SP112, Purolite S940, Amberlite IRC747, Amberlite IRC748, Amberlite IRC718, Lewatit TP207, Lewatit TP208, and Purolite S930. This extract is used in cancer treatment in traditional Chinese medicine (TCM). Attenuated total reflectance-Fourier transform infrared spectroscopy, thermogravimetric analysis with differential scanning calorimetry, X-ray powder diffraction, gel permeation chromatography, surface analysis, scanning electron microscopy with energy dispersive X-ray spectroscopy, and point of zero charge analysis were used for sorbent and adsorption process characterization, as well as for explanation of the Cd(II) sorption mechanism.

Characterizing Bacterial Cellulose Produced byKomagataeibacter sucrofermentans H-110 on Molasses Medium and Obtaining a Biocomposite Based on It for the Adsorption of Fluoride

Currently, there is an increased demand for biodegradable materials in society due to growing environmental problems. Special attention is paid to bacterial cellulose, which, due to its unique properties, has great prospects for obtaining functional materials for a wide range of applications, including adsorbents. In this regard, the aim of this study was to obtain a biocomposite material with adsorption properties in relation to fluoride ions based on bacterial cellulose using a highly productive strain of Komagataeibacter sucrofermentans H-110 on molasses medium. Films of bacterial cellulose were obtained. Their structure and properties were investigated by FTIR spectroscopy, NMR, atomic force microscopy, scanning electron microscopy, and X-ray structural analysis. The results show that the fiber thickness of the bacterial cellulose formed by the K. sucrofermentans H-110 strain on molasses medium was 60–90 nm. The degree of crystallinity of bacterial cellulose formed on the medium was higher than on standard Hestrin and Schramm medium and amounted to 83.02%. A new biocomposite material was obtained based on bacterial cellulose chemically immobilized on its surface using atomic-layer deposition of nanosized aluminum oxide films. The composite material has high sorption ability to remove fluoride ions from an aqueous medium. The maximum adsorption capacity of the composite is 80.1 mg/g (F/composite). The obtained composite material has the highest adsorption capacity of fluoride from water in comparison with other sorbents. The results prove the potential of bacterial cellulose-based biocomposites as highly effective sorbents for fluoride.

Development of a polymeric nanocomposite as a high performance adsorbent for Pb(II) removal from water medium: Equilibrium, kinetic and antimicrobial activity

In the present study, starch based ZnO nancomposite (CSt-ZnO) was synthesized for the efficient removal of Pb(II) ions from aqueous medium. The structure and morphology of CSt-ZnO nancomposite was characterized using SEM, FTIR, TGA, BET, XPS and zeta potential measurements. The effect of contact time, pH, temperature and initial concentration of Pb(II) on the adsorption was studied. The optimum parameters for maximum Pb(II) removal were time-120 min; pH-6; temperature-318 K and C_o-20 ppm. The maximum Langmuir adsorption capacity of CSt-ZnO nancomposite was 256.4 mg/g at 298 K. With increasing the temperature from 298 K to 318 K, the maximum adsorption quantity (q_m) was improved from 256.4 to 476 mg/g which showed the endothermic nature of Pb(II) adsorption on CSt-ZnO nanocomposite. The sorption isotherm and kinetics model fitting studies, confirmed that data fit well to Freundlich isotherm and pseudo-first-order kinetics models, respectively. Thermodynamic studies inferred a spontaneous and endothermic nature of adsorption. Moreover, the adsorption capacity was 68% even after four adsorption-desorption cycles which revealed the reusable performance of CSt-ZnO was well. The antimicrobial activity of CSt-ZnO nanocomposite was also examined against S. aureus and E. coli.

Recent trends in the application of modified starch in the adsorption of heavy metals from water: A review

The presence of polyfunctional ligands on the bio-macromolecules acts as an efficient adsorbent for heavy metal ions. Starch is one of the most abundant, easily available and cheap biopolymer of plant origin. However, native starch exhibits significantly low adsorption capacity due to the absence of some essential functional groups like carboxyl, amino or ester groups and is thus modified using various reaction routes like grafting, cross-linking, esterification, oxidation and irradiation for addition of functional groups to increase its adsorption capacity. The present review provides a comprehensive discussion on the above mentioned modification schemes of starch over the last 10-15 years highlighting their preparation methods, physico-chemical characteristics along with their adsorption capacities and mechanisms of heavy metal ions from water.