Computed tomography morphometric study of gender differences in osteoarthritis proximal tibias

Sex differences in osteoarthritis prevalence, pain perception, physical function and therapeutics

OBJECTIVE

Women have a higher prevalence of osteoarthritis (OA) and worse clinical courses than men. However, the underlying factors and therapeutic outcomes of these sex-specific differences are incompletely researched. This review examines the current state of knowledge regarding sex differences in OA prevalence, risk factors, pain severity, functional outcomes, and use and response to therapeutics.

METHODS

PubMed database was used with the title keyword combinations "{gender OR sex} AND osteoarthritis" plus additional manual search of the included papers for pertinent references, yielding 212 references. Additional references were added and 343 were reviewed for appropriateness.

RESULTS

Globally, women account for 60% of people with osteoarthritis, with a greater difference after age 40. The higher risk for women may be due to differences in joint anatomy, alignment, muscle strength, hormonal influences, obesity, and/or genetics. At the same radiographic severity, women have greater pain severity than men, which may be explained by biologically distinct pain pathways, differential activation of central pain pathways, differences in pain sensitivity, perception, reporting, and coping strategies. Women have greater limitations of physical function and performance than men independent of BMI, OA severity, injury history, and amount of weekly exercise. Women also have greater use of analgesic medications than men but less use of arthroplasty and poorer prognosis after surgical interventions.

CONCLUSIONS

The recognition of sex differences in OA manifestations and management could guide tailoring of sex-specific treatment protocols, and analysis of sex as a biological variable in future research would enhance development of precision medicine.

Correlation between tibial valgus deformity and aspect ratio of resected tibial surface in female Chinese patients undergoing total knee arthroplasty

Background

Morphology of the resected tibial surface is the reference for tibial component design, selection, and implantation in total knee arthroplasty (TKA). This comparative study sought to answer whether valgus deformity of the tibia would affect the morphology of the resected tibial surface in TKA.

Methods

Thirty-one female Chinese patients with valgus tibias were retrospectively and consecutively identified from a single-center registration database. Thirty-one patients with well-aligned tibias were matched in terms of gender, height, and weight. Weight-bearing full-length radiographs and computed tomography images of the whole lower limb were obtained for every case. Tibial resection was mimicked perpendicular to the mechanical axis of the tibia in the frontal plane with 3° of posterior slope and a cut level individualized by the actual intraoperative cut. On the resected surface, mediolateral dimension (MLD), medial anteroposterior dimensions (mAPD), and lateral anteroposterior dimensions (lAPD) were measured, and aspect ratios (AR) were calculated. We compared the AR between the two groups.

Results

The aspect ratio of resected tibial surface positively correlated with tibial valgus alignment. Patients with valgus tibias had significantly smaller AR (MLD/mAPD) for the medial plateau (1.50 ± 0.06 vs. 1.54 ± 0.07, P = 0.032). However, the AR for the lateral plateau was similar between the two groups (1.63 ± 0.08 vs. 1.65 ± 0.07, P = 0.328).

Conclusion

This difference in morphology of resected tibial surface between valgus and well-aligned tibias should be considered in tibial component design, as well as in the selection and placement of TKA implants for knees with valgus tibias.

Designing and in vitro testing of a novel patient-specific total knee prosthesis using the probabilistic approach

In order to prevent failure as well as ensure comfort, patient-specific modelling for prostheses has been gaining interest. However, deterministic analyses have been widely used in the design process without considering any variation/uncertainties related to the design parameters of such prostheses. Therefore, this study aims to compare the performance of patient-specific anatomic Total Knee Arthroplasty (TKA) with off-the-shelf TKA. In the patient-specific model, the femoral condyle curves were considered in the femoral component's inner and outer surface design. The tibial component was designed to completely cover the tibia cutting surface. In vitro experiments were conducted to compare these two models in terms of loosening of the components. A probabilistic approach based on the finite element method was also used to compute the probability of failure of both models. According to the deterministic analysis results, 103.10 and 21.67 MPa von Mises stress values were obtained for the femoral component and cement in the anatomical model, while these values were 175.86 and 25.76 MPa, respectively, for the conventional model. In order to predict loosening damage due to local osteolysis or stress shield, it was determined that the deformation values in the examined cement structures were 15% lower in the anatomical model. According to probabilistic analysis results, it was observed that the probability of encountering an extreme value for the anatomical model is far less than that of the conventional model. This indicates that the anatomical model is safer than the conventional model, considering the failure scenarios in this study.

Sexual dimorphism and racial diversity render bone-implant mismatch inevitable after off-the-shelf total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the variability in femoral geometric ratios among knees of different sexes and races, and to appreciate whether the observed variability is accommodated by commonly implanted total knee arthroplasty (TKA) components. The hypothesis was that the anthropometric studies report considerable variability of femoral geometric ratios among sexes and races.

METHODS

This systematic review and meta-analysis was performed according to the Preferred Reporting Items for Systematic reviews and Meta-analyses (PRISMA) criteria. Two authors independently conducted an electronic search using MEDLINE^® and Embase^® on 6 July 2020 for clinical studies reporting on femoral geometric ratios among sexes and races. Femoral geometric ratios were graphically represented as means and 2 standard deviations, and compared to those of 13 commonly implanted femoral components.

RESULTS

A total of 15 studies were identified that reported on a combined total of 2627 knees; all reported the aspect ratio, and 2 also reported the asymmetry ratio and trapezoidicity ratio. Men had wider knees than women, and compared to Caucasian knees, Arabian and Indian knees were wider, while East Asian were narrower. There were no differences in asymmetry ratio between men and women, nor among Caucasian and East Asian knees. Men had more trapezoidal knees than women, and East Asian knees were more trapezoidal than Caucasian knees. The commonly implanted femoral components accommodated less than a quarter of the geometric variability observed among sexes and races.

CONCLUSION

Anthropometric studies reported considerable sexual dimorphism and racial diversity of femoral geometric ratios. Since a surgeon generally only uses one or a few TKA brands, bone-implant mismatch remains unavoidable in a large proportion of knees. These findings support the drive towards personalized medicine, and accurate bone-implant fit may only be achievable through customisation of implants, though the clinical benefits of custom TKA remain to be confirmed.

LEVEL OF EVIDENCE

IV.

Gender and Sex Are Key Determinants in Osteoarthritis Not Only Confounding Variables. A Systematic Review of Clinical Data

Many risk factors for osteoarthritis (OA) have been noted, while gender/sex differences have been understated. The work aimed to systematically review literature investigating as primary aim the relationship between gender/sex related discriminants and OA. The search was performed in PubMed, Science Direct and Web of Knowledge in the last 10 years. Inclusion criteria were limited to clinical studies of patients affected by OA in any joints, analyzing as primary aim gender/sex differences. Exclusion criteria were review articles, in vitro, in vivo and ex vivo studies, case series studies and papers in which gender/sex differences were adjusted as confounding variable. Of the 120 records screened, 42 studies were included. Different clinical outcomes were analyzed: morphometric differences, followed by kinematics, pain, functional outcomes after arthroplasty and health care needs of patients. Women appear to use more health care, have higher OA prevalence, clinical pain and inflammation, decreased cartilage volume, physical difficulty, and smaller joint parameters and dimensions, as compared to men. No in-depth studies or mechanistic studies analyzing biomarker differential expressions, molecular pathways and omic profiles were found that might drive preclinical and clinical research towards sex-/gender-oriented protocols.

Anthropometric measurements of patellar ridge using computed tomography-based three-dimensional computer models

Background

The objectives of this study were to investigate the anatomic morphology of patellar ridge using computed tomography-based three-dimensional (3D) computer models and to assess the center of the patellar ridge after virtual resections.

Methods

We selected 80 patients, 40 males (age, 33.2±6.8 years) and 40 females (age, 30.6±7.2 years), who were slightly symptomatic with soft tissue injury of the knee joint. The right or left knees were scanned by computed tomography (CT). The CT data of 160 knees was used to construct 3D computer models by image analysis software (Mimics). Variables such as the angle between the patellar ridge and patellar long axis, the distance between the center of the patellar ridge and the center of patellar cut after virtual resections were measured. We detect differences between the sides and genders with the 3D computer models by Student’s t test. Simple linear regression and correlation test was used to correlate the patellar ridge center to the center of the patellar cut.

Results

According to the available data, there were significant gender differences in the length and width of patellar cut after virtual resections even with strict control for the height and weight of the patients. The angle between the patellar ridge and the patellar long axis was 11.24° ± 3.62°. The angle in male patients was 10.17° ± 4.82°, and it was 12.28°± 3.78° in female patients. The morphological difference was statistically significant (P < 0.05). After using the subchondral method to virtually resect the patellae, with reference to the center of the patellar cut, the center of the patellar ridge lies superiorly and medially in 88.75%, inferiorly and medially in 8.75%, laterally and superiorly in 2.5%, and in no case laterally and inferiorly. The intra-observer reliability regarding the dimensional measurements was excellent in this study.

Conclusions

Advances in 3D computer models had resulted in the availability of preoperative measurement and virtual planning. The anthropometric dimensions of this study could provide general information for guiding surgical management of the patella in total knee arthroplasty (TKA) and were useful in designing patellar implants.

Clinical relevance

The placement of the patellar component during TKA differs from one patella to another. The anatomic morphology information of the patellar ridge is helpful for surgeons to perform patellar resurfacing in TKA.

Considerable inter-individual variability of tibial geometric ratios renders bone-implant mismatch unavoidable using off-the-shelf total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the variability in tibial geometric ratios among knees of different sexes and races to determine whether commercially-available tibial baseplates accommodate the morphologic diversity. The hypothesis was that anthropometric studies report considerable variability of tibial geometric ratios among sexes and races.

METHODS

This systematic review and meta-analysis was performed according to the preferred reporting items for systematic reviews and meta-analyses (PRISMA) criteria. Two authors independently conducted an electronic search using MEDLINE^® and Embase^® on 28 January 2021 for clinical studies reporting on tibial geometric ratios. Tibial geometric ratios, as reported by the clinical studies, were represented by plotting their means and two standard deviations for comparison to two symmetric and two asymmetric commercially-available tibial baseplates.

RESULTS

A total of 27 articles that reported on a combined total of 20,944 knees were eligible for data extraction. Variation in tibial aspect ratios was equal among sexes. The greatest variation in aspect ratio was observed among East Asians, followed by Caucasians, African-Americans, Indian and Middle Easterns. The variation in tibial asymmetry ratio was larger among men compared to women. The greatest variation in asymmetry ratio was observed among African-Americans, followed by Caucasians, East Asians, Indian and Middle Easterns. Bone-implant mismatch of > 3 mm overhang or > 4 mm under-coverage with four commercially-available tibial baseplates occurred in large proportions of knees due to variations in aspect ratio (in 17-100% of knees) and asymmetry ratio (in 7-100% of knees).

CONCLUSION

Anthropometric studies reported considerable inter-individual variability of tibial geometric ratios, which exceeded effects of sexual dimorphism and racial diversity. Bone-implant mismatch may be unavoidable in a large proportion of knees, when considering that a surgeon generally only uses one or a few TKA brands. These findings support the drive towards patient-specific implants to potentially achieve accurate bone-implant fit by implant customisation.

LEVEL OF EVIDENCE

IV.

Morphometric analysis of medial and lateral tibia plateau and adaptability with Oxford partial knee replacement in a Japanese population

AIMS

In unicompartmental knee arthroplasty (UKA), tibial components must be correctly sized and positioned so that tibial cut surfaces are well covered without marked under- or overhang with impingement of the surrounding soft tissue. We used morphometric data of both medial and lateral tibial plateaus separately to plan UKA and evaluated the compatibility of the measurement data to the dimensions of six currently available tibial prostheses in a Japanese population.

MATERIALS AND METHODS

Using computed tomography, we preoperatively examined 60 patients (30 medial and 30 lateral osteoarthritis (OA)) scheduled for primary UKA at our hospital between 2013 and 2017. Each tibial cutting surface was measured in the transverse plane at 2 mm below the respective joint line. We used anteroposterior and mediolateral length to calculate the mediolateral length/anteroposterior ratio of both medial and lateral compartments. We then compared measurements across six current UKA systems: Oxford fixed tibia and fixed lateral tibia, Triathlon, TRIBRID, JOURNEY UNI, and HLS Uni Evolution.

RESULTS

We found no significant differences in morphometric data between the medial and the lateral OA. The cutting surface of lateral plateau, however, had smaller anteroposterior dimensions, greater mediolateral length, and higher mediolateral length/anteroposterior ratio than those of medial plateau. Therefore, in this Japanese population-based study, Oxford lateral tibia had good compatibility with the measurement data of lateral compartments.

CONCLUSIONS

Lateral compartments had lower anteroposterior length, greater mediolateral length, and higher mediolateral length/anteroposterior ratio than those of medial compartments. We, therefore, strongly recommend using Oxford fixed lateral tibia for lateral OA over other current tibial prostheses because of superior coverage.

Difference in coronal curvature of the medial and lateral femoral condyle morphology by gender in implant design for total knee arthroplasty

PURPOSE

The purpose of this study was to investigate the morphometric data obtained from the three-dimensional magnetic resonance images of ethnic Korean knee osteoarthritis, and to evaluate the morphological differences between the coronal curvature of the female and male femoral condyles.

METHODS

The differences in coronal curvature of the femoral condyle morphology of 1990 patients (1689 females and 301 males) were evaluated in three dimensions. A close-fit diameter was, respectively, generated on the medial and lateral femoral condyle articular surfaces, and these diameters reflect the coronal diameter of the femoral condyle curvature. These measurements were compared with those of the femoral design of five different commonly used total knee arthroplasty (TKA) implant designs.

RESULTS

The average diameter of the curvature of the medial condyles was significantly larger than that of the lateral condyles (P < 0.05). This trend was found in the male and female groups. In addition, the average diameter of the curvature of the femoral condyles was found to significantly differ between males and females (P < 0.05). For four TKA implant designs, the average diameter of the coronal curvature of femoral condyle was smaller than that obtained via our measurements, whereas one TKA implant design yielded a smaller average diameter. Furthermore, the medial and lateral coronal curvatures of the femoral condyle were symmetric in all TKA implant designs.

CONCLUSION

The study provided a reliable and consistent evaluation of the coronal curvature of femoral condyles in the Korean population. These results showed that a gender-specific or asymmetric femoral component design is required to regenerate the coronal curvature of the femoral condyles for ethnically Korean males and females.

What Differences in Morphologic Features of the Knee Exist Among Patients of Various Races? A Systematic Review

BACKGROUND

Most TKA prostheses are designed based on the anatomy of white patients. Individual studies have identified key anthropometric differences between the knees of the white population and other major ethnic groups, yet there is limited understanding of what these findings may indicate if analyzed collectively.

QUESTION/PURPOSE

What are the differences in morphologic features of the distal femur and proximal tibia among and within various ethnicities?

METHODS

A systematic review of the PubMed database and a hand-search of article bibliographies identified 235 potentially eligible English-language studies. Studies were excluded if they did not include morphology results or had insufficient data for analysis, were unrelated to the distal femur or proximal tibia, were conducted in pediatric patients or those undergoing unicondylar knee arthroplasty, or bone surface measurements were obtained for trauma products. This left 30 eligible studies (9050 knees). Study quality was assessed and reported as good, fair, or poor according to the NIH Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies. Morphometric data for the distal femur and proximal tibia were available for four ethnic groups: East Asian (23 studies; 5543 knees), white (11 studies; 3111 knees), Indian (three studies; 283 knees), and black (three studies; 113 knees). Although relatively underrepresented, the knees from the Indian and black studies were maintained for hypothesis-generating purposes and to highlight crucial gaps in the data. The two key dimensions for selecting a suitable implant based on a patient's unique anatomy-AP length and mediolateral (ML) width-were assessed for the femur and tibia, in addition to aspect ratio, calculated by dividing the ML width by the AP length. Study measurement techniques were compared visually when possible to ensure that each pooled study conducted a similar measurement process. Any significant measurement outliers were reviewed for eligibility to determine if the measurement techniques and landmarks used were comparable to the other studies included.

RESULTS

White patients had larger femoral AP measurements than East Asians (62 mm, [95% CI, 57-66 mm] vs 59 mm, [95% CI, 54-63 mm]; mean difference, 3 mm; p < 0.001), a smaller femoral aspect ratio than East Asians (1.20, [95% CI, 1.11-1.29] vs 1.25, [95% CI, 1.16-1.34]; mean difference, 0.05; p = 0.001), and a larger tibial aspect ratio than black patients (1.55, [95% CI, 1.40-1.71] vs 1.49, [95% CI, 1.33-1.64]; mean difference, 0.06; p = 0.005).

CONCLUSIONS

This analysis uncovered differences of size (AP height and ML width of the femur and tibia) and shape (tibial and femoral aspect ratios) among knees from white, East Asian, and black populations. Future research is needed to understand the clinical implications of these discrepancies and to provide additional data with underrepresented groups.

Effects of measurement methods for tibial rotation axis on the morphometry in Korean populations by gender

BACKGROUND

There have been arguments for methodology in tibial rotation axis measurement, which accordingly determines the morphometry of the proximal tibia in total knee arthroplasty. The morphometry of the proximal tibia for the Korean population is determined by gender, based on the anatomical tibial axis and reliable rotational orientation in knee replacements, to evaluate the size suitability of the currently available prostheses in Korea.

METHODS

This study reconstructed the MRI images in three-dimensions for identification and measurement of the mediolateral (ML) and anteroposterior (AP) lengths of the proximal tibia and the tibial aspect ratio (ML/AP) using proximal tibial anthropometric data for 700 osteoarthritic knees (587 females and 113 males). The ML and AP lengths were measured using tibial rotation axis techniques based on the medial one-third tibial tubercle and Cobb's method.

RESULTS

Significant differences (P<0.05) in ML, medial anteroposterior (MAP), lateral anteroposterior (LAP) lengths, and aspect ratio (ML/LAP) were observed for males and females with respect to different measurement techniques for the tibial rotation axis. However, the measured aspect ratio (ML/MAP) of tibiae for the Korean population did not show significance. The measured aspect ratio (ML/AP) ratio of tibiae for the Korean population was higher than that of currently available tibial components.

CONCLUSIONS

Results from this study can guide development of gender-specific tibial prosthesis designs with different ML and AP aspect ratios based on the tibial anatomical rotation axis for the Korean population.

Comparison of intraoperative anthropometric measurements of the proximal tibia and tibial component in total knee arthroplasty

BACKGROUND

Precise matching of the tibial component and resected bony surfaces and proper rotational implanting of the tibial component are crucial for successful total knee arthroplasty. We aimed to analyze the exact anthropometric proximal tibial data of Japanese patients undergoing total knee arthroplasty and correlate the measurements with the dimensions of current total knee arthroplasty systems.

METHODS

A total of 703 knees in 566 Japanese patients who underwent total knee arthroplasty for osteoarthritis were included. The bone resection in the proximal tibia was performed perpendicular to the tibial axis in the frontal plane. Measurements of the proximal tibia were intraoperatively obtained after proximal tibial preparation.

RESULTS

There were significant positive correlations between the lateral anteroposterior and medial anteroposterior and mediolateral dimensions. A progressive decrease in the mediolateral/lateral anteroposterior ratio with an increasing lateral anteroposterior dimension or the mediolateral/anteroposterior ratio with an increasing anteroposterior dimension was observed. The lateral anteroposterior dimension was smaller than the medial anteroposterior dimension by a mean of 4.8 ± 2.0 mm. The proximal tibia exhibited asymmetry between the lateral and medial plateaus. A comparison of the morphological data and dimensions of the implants, one of which was a symmetric tibial component (NexGen) and the others were asymmetric (Genesis II and Persona), indicated that an asymmetric tibial component could be beneficial to maximize tibial plateau coverage.

CONCLUSIONS

This study provided important reference data for designing a proper tibial component for Japanese people. The proximal tibial cut surface was asymmetric. There was wide dispersion in the lateral anteroposterior, medial anteroposterior, and mediolateral dimensions depending on the patient. Our data showed that the tibial components of the Genesis II and Persona rather than that of the NexGen may be preferable for Japanese people because of their asymmetric design.

Comprehensive assessment of patellar morphology using computed tomography-based three-dimensional computer models

BACKGROUND

The objectives of this study were to assess patellar morphology using computed tomography-based three-dimensional computer models and to determine the utility of the subchondral method for patellar resection in total knee arthroplasty (TKA).

METHODS

Overall, 120 subjects (60 males, 60 females) from 20 to 50 years old were included. Computer tomography images were used to construct 3D computer models of 240 knees. An anthropometric analysis of variance was used with the models to detect differences between the sides, age groups, and genders.

RESULTS

Based on the available numbers, there were significant gender differences in the patellar length, width, and thickness even with strict control for the height and weight of the patients. The average patellar width/thickness ratio was 1.95, regardless of gender, and there was a good correlation between the patellar width and thickness (male: r=0.68, p<0.01; female: r=0.75, p<0.01). After using the subchondral method to virtually resect the patellae, the mean thickness for males and female was 14.0mm and 12.3mm, respectively. The proportion of the residual bony thickness that was less than 12 mm was 5.83% (seven cases) in the male group and up to 42.5% (51 cases) in the female group. There was excellent intra-observer reliability and inter-observer reliability regarding the dimensional measurements in this study.

CONCLUSIONS

A robust method of measuring and virtually resecting the patella was established. The anthropometric dimensions of this study could provide basic data for guiding surgical management of the patella in TKA and are useful in designing patellar implants.

CLINICAL RELEVANCE

The anthropometric patellar information is essential for surgeons to perform patellar resurfacing in TKA.

Intraoperative anthropometric measurements of tibial morphology: comparisons with the dimensions of current tibial implants

PURPOSES

This study analyzed morphological differences in the resected proximal tibial surfaces of Chinese males and females undergoing total knee arthroplasty (TKA) and compared the measurements with the dimensions of five currently used tibial implants.

METHODS

The mediolateral (ML), middle anteroposterior (AP), medial anteroposterior (MAP), and lateral anteroposterior (LAP) dimensions of the resected tibial surfaces of 976 Chinese TKA knees (177 male, 799 female) were measured. The ML/AP ratio of every knee was calculated. These morphological data were compared with the dimensions of five currently used tibial implants.

RESULTS

The ML, AP, MAP, and LAP dimensions of the resected proximal tibias showed significant differences according to gender. Compared with currently used tibial implants, the smaller implants showed tibial ML undersizing and the larger implants showed tibial ML overhang. The ML/AP aspect ratio progressively decreased with increasing AP dimension in the resected proximal tibias, which contrasts with the relatively constant or increased (NexGen) aspect ratio in currently used tibial implants. Males showed a higher ML/AP aspect ratio than females for a given AP dimension. This indicates that for an implant with a given AP dimension, the tibial ML dimension tends to be undersized in males and to overhang in females.

CONCLUSION

The results of this study may provide fundamental data for designing suitable tibial implants for use in the Chinese population, especially for design of gender-specific prostheses.

LEVEL OF EVIDENCE

II.

Comparative study of sex differences in distal femur morphology in osteoarthritic knees in a Chinese population

OBJECTIVES

The purpose of this study was to investigate sex differences in resected distal femoral morphology in Chinese osteoarthritic knees.

METHODS

The study included 130 osteoarthritic knees in 65 men and 65 women in China. None had anterior femoral osteophyte or serious patellar femoral joint degeneration. The following were measured using computed tomography and analyzed to identify morphological differences according to sex in the resected distal femurs: anterior lateral condylar height (ALCH), anterior medial condylar height (AMCH), and mediolateral (ML) and anteroposterior (AP) dimensions. The ML/AP aspect ratio was calculated.

RESULTS

The average ALCH and AMCH were 8.2±1.8 mm, 3.1±1.5 mm for men and 7.4±1.7 mm, 3.6±1.5 mm for women. There were significant differences between men and women in ALCH values (P = 0.014) but not in AMCH values (P = 0.09). Women had smaller ML/AP aspect ratios than men for a given AP dimension. This indicated that the femoral ML dimension of a prosthesis with a given AP dimension may have overhang in women.

CONCLUSIONS

This study suggested that sex differences should be taken into account in the design of femoral prosthesis for Chinese men and women.