Biophysical inhibition of synthetic vs. naturally-derived pulmonary surfactant preparations by polymeric nanoparticles

A Review on Investigating the Interactions between Nanoparticles and the Pulmonary Surfactant Monolayer with Coarse-Grained Molecular Dynamics Method

Pulmonary drug delivery has garnered significant attention due to its targeted local lung action, minimal toxic side effects, and high drug utilization. However, the physicochemical properties of inhaled nanoparticles (NPs) used as drug carriers can influence their interactions with the pulmonary surfactant (PS) monolayer, potentially altering the fate of the NPs and impairing the biophysical function of the PS monolayer. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affect their interactions with the PS monolayer. Initially, the definition and properties of NPs, as well as the composition and characteristics of the PS monolayer, are introduced. Subsequently, the coarse-grained molecular dynamics (CGMD) simulation method for studying the interactions between NPs and the PS monolayer is presented. Finally, the implications of the hydrophobicity, size, shape, surface charge, surface modification, and aggregation of NPs on their interactions with the PS monolayer and on the composition of biomolecular corona are discussed. In conclusion, gaining a deeper understanding of the effects of the physicochemical properties of NPs on their interactions with the PS monolayer will contribute to the development of safer and more effective nanomedicines for pulmonary drug delivery.

Pulmonary Surfactant Homeostasis Dysfunction Mediates Multiwalled Carbon Nanotubes Induced Lung Fibrosis via Elevating Surface Tension

Multiwalled carbon nanotubes (MWCNTs) have been widely used in many disciplines and raised great concerns about their negative health impacts, especially environmental and occupational exposure. MWCNTs have been reported to induce fibrotic responses; however, the underlying mechanisms remain largely veiled. Here, we reported that MWCNTs inhalation induced lung fibrosis together with decreased lung compliance, increased elastance in the mice model, and elevated surface tension in vitro. Specifically, MWCNTs increased surface tension by impairing the function of the pulmonary surfactant. Mechanistically, MWCNTs induced lamellar body (LB) dysfunction through autophagy dysfunction, which then leads to surface tension elevated by pulmonary surfactant dysfunction in the context of lung fibrosis. This is a study to investigate the molecular mechanism of MWCNTs-induced lung fibrosis and focus on surface tension. A direct mechanistic link among impaired LBs, surface tension, and fibrosis has been established. This finding elucidates the detailed molecular mechanisms of lung fibrosis induced by MWCNTs. It also highlights that pulmonary surfactants are expected to be potential therapeutic targets for the prevention and treatment of lung fibrosis induced by MWCNTs.

An explorative study on respiratory health among operators working in polymer additive manufacturing

Additive manufacturing (AM), or 3D printing, is a growing industry involving a wide range of different techniques and materials. The potential toxicological effects of emissions produced in the process, involving both ultrafine particles and volatile organic compounds (VOCs), are unclear, and there are concerns regarding possible health implications among AM operators. The objective of this study was to screen the presence of respiratory health effects among people working with liquid, powdered, or filament plastic materials in AM.

Methods

In total, 18 subjects working with different additive manufacturing techniques and production of filament with polymer feedstock and 20 controls participated in the study. Study subjects filled out a questionnaire and underwent blood and urine sampling, spirometry, impulse oscillometry (IOS), exhaled NO test (FeNO), and collection of particles in exhaled air (PEx), and the exposure was assessed. Analysis of exhaled particles included lung surfactant components such as surfactant protein A (SP-A) and phosphatidylcholines. SP-A and albumin were determined using ELISA. Using reversed-phase liquid chromatography and targeted mass spectrometry, the relative abundance of 15 species of phosphatidylcholine (PC) was determined in exhaled particles. The results were evaluated by univariate and multivariate statistical analyses (principal component analysis).

Results

Exposure and emission measurements in AM settings revealed a large variation in particle and VOC concentrations as well as the composition of VOCs, depending on the AM technique and feedstock. Levels of FeNO, IOS, and spirometry parameters were within clinical reference values for all AM operators. There was a difference in the relative abundance of saturated, notably dipalmitoylphosphatidylcholine (PC16:0_16:0), and unsaturated lung surfactant lipids in exhaled particles between controls and AM operators.

Conclusion

There were no statistically significant differences between AM operators and controls for the different health examinations, which may be due to the low number of participants. However, the observed difference in the PC lipid profile in exhaled particles indicates a possible impact of the exposure and could be used as possible early biomarkers of adverse effects in the airways.

Pulmonary delivery nanomedicines towards circumventing physiological barriers: Strategies and characterization approaches

Pulmonary delivery of nanomedicines is very promising in lung local disease treatments whereas several physiological barriers limit its application via the interaction with inhaled nanomedicines, namely bio-nano interactions. These bio-nano interactions may affect the pulmonary fate of nanomedicines and impede the distribution of nanomedicines in its targeted region, and subsequently undermine the therapeutic efficacy. Pulmonary diseases are under worse scenarios as the altered physiological barriers generally induce stronger bio-nano interactions. To mitigate the bio-nano interactions and regulate the pulmonary fate of nanomedicines, a number of manipulating strategies were established based on size control, surface modification, charge tuning and co-delivery of mucolytic agents. Visualized and non-visualized characterizations can be employed to validate the robustness of the proposed strategies. This review provides a guiding overview of the physiological barriers affecting the in vivo fate of inhaled nanomedicines, the manipulating strategies, and the validation methods, which will assist with the rational design and application of pulmonary nanomedicine.

Physicochemical properties of nanoparticles affecting their fate and the physiological function of pulmonary surfactants

Pulmonary drug delivery has drawn great attention due to its targeted local lung action, reduced side effects, and ease of administration. However, inhaled nanoparticles (NPs) could adsorb different pulmonary surfactants depending on their physicochemical properties, which may impair the physiological function of the pulmonary surfactants or alter the fate of the NPs. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affecting the physiological function of pulmonary surfactants and their fate. First of all, the composition and characteristics of pulmonary surfactants, methods for studying pulmonary surfactant interaction with NPs are introduced. Thereafter, the influence of physicochemical properties of NPs on hydrophobic protein adsorption and strategies to decrease the interaction of NPs with pulmonary surfactants are discussed. Finally, the influence of physicochemical properties of NPs on lipids and hydrophilic protein adsorption and consequently their fate is described. In conclusion, a better understanding of the interaction of NPs with pulmonary surfactants will promote the faster development of safe and effective nanomedicine for pulmonary drug delivery. STATEMENT OF SIGNIFICANCE: Drug delivery carriers often face complex body fluid components after entering the human body. Pulmonary surfactants diffuse at the lung gas-liquid interface, and particles inevitably interact with pulmonary surfactants after pulmonary nanomedicine delivery. This review presents an overview of how the physicochemical properties of nanoparticles affecting their fate and physiological function of pulmonary surfactants. We believe that the information included in this review can provide important guiding for the development of safe and effective pulmonary delivery nanocarriers.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Pulmonary surfactant as a versatile biomaterial to fight COVID-19

The COVID-19 pandemic has wielded an enormous pressure on global health care systems, economics and politics. Ongoing vaccination campaigns effectively attenuate viral spreading, leading to a reduction of infected individuals, hospitalizations and mortality. Nevertheless, the development of safe and effective vaccines as well as their global deployment is time-consuming and challenging. In addition, such preventive measures have no effect on already infected individuals and can show reduced efficacy against SARS-CoV-2 variants that escape vaccine-induced host immune responses. Therefore, it is crucial to continue the development of specific COVID-19 targeting therapeutics, including small molecular drugs, antibodies and nucleic acids. However, despite clear advantages of local drug delivery to the lung, inhalation therapy of such antivirals remains difficult. This review aims to highlight the potential of pulmonary surfactant (PS) in the treatment of COVID-19. Since SARS-CoV-2 infection can progress to COVID-19-related acute respiratory distress syndrome (CARDS), which is associated with PS deficiency and inflammation, replacement therapy with exogenous surfactant can be considered to counter lung dysfunction. In addition, due to its surface-active properties and membrane-interacting potential, PS can be repurposed to enhance drug spreading along the respiratory epithelium and to promote intracellular drug delivery. By merging these beneficial features, PS can be regarded as a versatile biomaterial to combat respiratory infections, in particular COVID-19.

Competitive and/or cooperative interactions of graphene-family materials and benzo[a]pyrene with pulmonary surfactant: a computational and experimental study

BACKGROUND

Airborne nanoparticles can be inhaled and deposit in human alveoli, where pulmonary surfactant (PS) molecules lining at the alveolar air-water interface act as the first barrier against inhaled nanoparticles entering the body. Although considerable efforts have been devoted to elucidate the mechanisms underlying nanoparticle-PS interactions, our understanding on this important issue is limited due to the high complexity of the atmosphere, in which nanoparticles are believed to experience transformations that remarkably change the nanoparticles' surface properties and states. By contrast with bare nanoparticles that have been extensively studied, relatively little is known about the interactions between PS and inhaled nanoparticles which already adsorb contaminants. In this combined experimental and computational effort, we investigate the joint interactions between PS and graphene-family materials (GFMs) with coexisting benzo[a]pyrene (BaP).

RESULTS

Depending on the BaP concentration, molecular agglomeration, and graphene oxidation, different nanocomposite structures are formed via BaPs adsorption on GFMs. Upon deposition of GFMs carrying BaPs at the pulmonary surfactant (PS) layer, competition and cooperation of interactions between different components determines the interfacial processes including BaP solubilization, GFM translocation and PS perturbation. Importantly, BaPs adsorbed on GFMs are solubilized to increase BaP's bioavailability. By contrast with graphene adhering on the PS layer to release part of adsorbed BaPs, more BaPs are released from graphene oxide, which induces a hydrophilic pore in the PS layer and shows adverse effect on the PS biophysical function. Translocation of graphene across the PS layer is facilitated by BaP adsorption through segregating it from contact with PS, while translocation of graphene oxide is suppressed by BaP adsorption due to the increase of surface hydrophobicity. Graphene extracts PS molecules from the layer, and the resultant PS depletion declines with graphene oxidation and BaP adsorption.

CONCLUSION

GFMs showed high adsorption capacity towards BaPs to form nanocomposites. Upon deposition of GFMs carrying BaPs at the alveolar air-water interface covered by a thin PS layer, the interactions of GFM-PS, GFM-BaP and BaP-PS determined the interfacial processes of BaP solubilization, GFM translocation and PS perturbation.

Are Plant-Based Carbohydrate Nanoparticles Safe for Inhalation? Investigating Their Interactions with the Pulmonary Surfactant Using Langmuir Monolayers

Nanoparticle carriers show promise for drug delivery, including by inhalation, where the first barrier for uptake in the lungs is the monolayer pulmonary surfactant membrane that coats the air/alveoli interface and is critical to breathing. It is imperative to establish the fate of potential nanocarriers and their effects on the biophysical properties of the pulmonary surfactant. To this end, the impact of the nanoparticle surface charge on the lateral organization, thickness, and recompressibility of Langmuir monolayers of model phospholipid-only and phospholipid-protein mixtures was investigated using native and modified forms of nanophytoglycogen, a carbohydrate-based dendritic polymer extracted from corn as monodisperse nanoparticles. We show that the native (quasi-neutral) and anionic nanophytoglycogens have little impact on the phase behavior and film properties. By contrast, cationic nanophytoglycogen alters the film morphology and increases the hysteresis associated with the work of breathing due to its electrostatic interaction with the anionic phospholipids in the model systems. These findings specifically highlight the importance of surface charge as a selection criterion for inhaled nanoformulations.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Application of nanotechnology in drug delivery systems for respiratory diseases (Review)

Respiratory disease is a common disease with a high incidence worldwide, which is a serious threat to human health, and is considered a societal and economic burden. The application of nanotechnology in drug delivery systems has created new treatments for respiratory diseases. Within this context, the present review systematically introduced the physicochemical properties of nanoparticles (NPs); reviewed the current research status of different nanocarriers in the treatment of respiratory diseases, including liposomes, solid lipid nanocarriers, polymeric nanocarriers, dendrimers, inorganic nanocarriers and protein nanocarriers; and discussed the main advantages and limitations of therapeutic nanomedicine in this field. The application of nanotechnology overcomes drug inherent deficiencies to a certain extent, and provides unlimited potential for the development of drugs to treat respiratory diseases. However, most of the related research work is in the preclinical experimental stage and safety assessment is still a challenging task. Future studies are needed to focus on the performance modification, molecular mechanism and potential toxicity of therapeutic nanomedicine.

Exploring the Toxicity, Lung Distribution, and Cellular Uptake of Rifampicin and Ascorbic Acid-Loaded Alginate Nanoparticles as Therapeutic Treatment of Lung Intracellular Infections

Nanotechnology is a very promising technological tool to combat health problems associated with the loss of effectiveness of currently used antibiotics. Previously, we developed a formulation consisting of a chitosan and tween 80-decorated alginate nanocarrier that encapsulates rifampicin and the antioxidant ascorbic acid (RIF/ASC), intended for the treatment of respiratory intracellular infections. Here, we investigated the effects of RIF/ASC-loaded NPs on the respiratory mucus and the pulmonary surfactant. In addition, we evaluated their cytotoxicity for lung cells in vitro, and their biodistribution on rat lungs in vivo after their intratracheal administration. Findings herein demonstrated that RIF/ASC-loaded NPs display a favorable lung biocompatibility profile and a uniform distribution throughout lung lobules. RIF/ASC-loaded NPs were mainly uptaken by lung macrophages, their primary target. In summary, findings show that our novel designed RIF/ASC NPs could be a suitable system for antibiotic lung administration with promising perspectives for the treatment of pulmonary intracellular infections.

Nanoapproaches to Modifying Epigenetics of Epithelial Mesenchymal Transition for Treatment of Pulmonary Fibrosis

Idiopathic Pulmonary Fibrosis (IPF) is a chronically progressive interstitial lung that affects over 3 M people worldwide and rising in incidence. With a median survival of 2-3 years, IPF is consequently associated with high morbidity, mortality, and healthcare burden. Although two antifibrotic therapies, pirfenidone and nintedanib, are approved for human use, these agents reduce the rate of decline of pulmonary function but are not curative and do not reverse established fibrosis. In this review, we discuss the prevailing epithelial injury hypothesis, wherein pathogenic airway epithelial cell-state changes known as Epithelial Mesenchymal Transition (EMT) promotes the expansion of myofibroblast populations. Myofibroblasts are principal components of extracellular matrix production that result in airspace loss and mortality. We review the epigenetic transition driving EMT, a process produced by changes in histone acetylation regulating mesenchymal gene expression programs. This mechanistic work has focused on the central role of bromodomain-containing protein 4 in mediating EMT and myofibroblast transition and initial preclinical work has provided evidence of efficacy. As nanomedicine presents a promising approach to enhancing the efficacy of such anti-IPF agents, we then focus on the state of nanomedicine formulations for inhalable delivery in the treatment of pulmonary diseases, including liposomes, polymeric nanoparticles (NPs), inorganic NPs, and exosomes. These nanoscale agents potentially provide unique properties to existing pulmonary therapeutics, including controlled release, reduced systemic toxicity, and combination delivery. NP-based approaches for pulmonary delivery thus offer substantial promise to modify epigenetic regulators of EMT and advance treatments for IPF.

Interactions of particulate matter and pulmonary surfactant: Implications for human health

Particulate matter (PM), which is the primary contributor to air pollution, has become a pervasive global health threat. When PM enters into a respiratory tract, the first body tissues to be directly exposed are the cells of respiratory tissues and pulmonary surfactant. Pulmonary surfactant is a pivotal component to modulate surface tension of alveoli during respiration. Many studies have proved that PM would interact with pulmonary surfactant to affect the alveolar activity, and meanwhile, pulmonary surfactant would be adsorbed to the surface of PM to change the toxic effect of PM. This review focuses on recent studies of the interactions between micro/nanoparticles (synthesized and environmental particles) and pulmonary surfactant (natural surfactant and its models), as well as the health effects caused by PM through a few significant aspects, such as surface properties of PM, including size, surface charge, hydrophobicity, shape, chemical nature, etc. Moreover, in vitro and in vivo studies have shown that PM leads to oxidative stress, inflammatory response, fibrosis, and cancerization in living bodies. By providing a comprehensive picture of PM-surfactant interaction, this review will benefit both researchers for further studies and policy-makers for setting up more appropriate regulations to reduce the adverse effects of PM on public health.

Nanotechnology and Early Human Development

The application of nanotechnology, molecular biotechnologies, and nano-sciences for medical purposes has been termed nanomedicine, a promising growing area of medical research. The aim of this paper is to provide an overview of and discuss nanotechnology applications in the early epochs of life, from transplacental transfer to neonatal/pediatric conditions. Diagnostic and therapeutic applications, mainly related to the respiratory tract, the neurosensory system, and infections, are explored and discussed. Preclinical studies show promising results for a variety of conditions, including for the treatment of pregnancy complications and fetal, neonatal, and pediatric diseases. However, given the complexity of the functions and interactions between the placenta and the fetus, and the complex and incompletely understood determinants of tissue growth and differentiation during early life, there is a need for much more data to confirm the safety and efficacy of nanotechnology in this field.

Nanoparticle translocation across the lung surfactant film regulated by grafting polymers

Nanoparticle-based pulmonary drug delivery has gained significant attention due to its ease of administration, increased bioavailability, and reduced side effects caused by a high systemic dosage. After being delivered into the deep lung, the inhaled nanoparticles first interact with the lung surfactant lining layer composed of phospholipids and surfactant proteins and then potentially cause the dysfunction of the lung surfactant. Conditioning the surface properties of nanoparticles with grafting polymers to avoid these side effects is of crucial importance to the efficiency and safety of pulmonary drug delivery. Herein, we perform coarse-grained molecular simulations to decipher the involved mechanism responsible for the translocation of the polymer-grafted Au nanoparticles across the lung surfactant film. The simulations illustrate that conditioning of the grafting polymers, including their length, terminal charge, and grafting density, can result in different translocation processes. Based on the energy analysis, we find that these discrepancies in translocation stem from the affinity of the nanoparticles with the lipid tails and heads and their contact with the proteins, which can be tuned by the surface polarity and surface charge of the nanoparticles. We further demonstrate that the interaction between the nanoparticles and the lung surfactant is related to the depletion of the lipids and proteins during translocation, which affects the surface tension of the surfactant film. The change in the surface tension in turn affects the nanoparticle translocation and the collapse of the surfactant film. These results can help understand the adverse effects of the nanoparticles on the lung surfactant film and provide guidance to the design of inhaled nanomedicines for improved permeability and targeting.

The Lord of the Lungs: The essential role of pulmonary surfactant upon inhalation of nanoparticles

The rapid development of nanotechnology is opening a huge world of promising possibilities in healthcare, but this is also increasing the necessity to study the potential risk of nanoparticles on public health and the environment. Since the main route for airborne particles to enter into our organism is through the lungs, it has become essential to prove that the nanoparticles generated by human activities do not compromise the respiratory function. This review explains the key role of pulmonary surfactant to sustain the normal function of breathing, as well as the stability and immunity of lungs. Particular emphasis is made on the importance of analysing the features of nanoparticles, defining their interactions with surfactant and unravelling the mutual effects. The implication of the nanoparticle-surfactant interaction on the function and fate of both structures is described, as well as the main in vitro methodologies used to evaluate this interaction. Finally, the incorporation of pulmonary surfactant in appropriate in vitro models is used in order to obtain an extensive understanding of how nanoparticles may act in the context of the lung. The main goal of this review is to offer a general view on inhaled nanoparticles and their effects on the structure and function of lungs derived from their interaction with the pulmonary surfactant system.

Bioinspired polymer nanoparticles omit biophysical interactions with natural lung surfactant

Herein, we report the attenuated impact of bioinspired nanoparticles on the essential function of lung surfactant. Colloidal particles made from poly(lactide) caused a significant loss of surfactant protein B (and C) from a natural lung surfactant accompanied by a decline in surface activity under static conditions and surface area cycling. No such perturbation of lung surfactant composition and function was observed for polymer nanoparticles coated with bioinspired poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC). More specifically, increasing the PMPC-coating layer thickness (≥3 nm) and density (dense conformation, distance of individual polymer chains of ≤3 nm) on the polymer nanoparticle surface diminished bioadverse events. PMPC-coated poly(lactide) nanoparticles provoked a less severe perturbation of the utilized lung surfactant when compared to colloidal counterparts coated with poly(ethylene glycol). Overall, a steric shielding of colloidal drug delivery vehicles with bioinspired PMPC can be considered as a valuable approach for the rationale development of biocompatible nanomedicines intended for lung delivery.

Pulmonary Function Testing in Animals

Nanoparticles possess a number of useful properties that make them useful for a variety of industrial and commercial applications. The small size of nanoparticles means that they are respirable and can penetrate deep into the lung when inhaled. Because of this, there is interest in assessing possible toxic effects of nanoparticles on the respiratory system. Measurement of respiratory mechanics and pulmonary function represents a sensitive way of detecting pathological effects of inhaled substances on the lungs. Here we describe a procedure for conducting pulmonary function measurements in mice using the forced oscillation technique. Measurements of baseline lung mechanics are conducted in anesthetized, mechanically ventilated mice, followed by repeated measurements subsequent to inhalation challenge with aerosolized methacholine. General guidelines for data analysis are provided, and sample results are presented.

Pulmonary surfactant and drug delivery: Focusing on the role of surfactant proteins

Pulmonary surfactant (PS) has been extensively studied because of its primary role in mammalian breathing. The deposition of this surface-active material at the alveolar air-water interface is essential to lower surface tension, thus avoiding alveolar collapse during expiration. In addition, PS is involved in host defense, facilitating the clearance of potentially harmful particulates. PS has a unique composition, including 92% of lipids and 8% of surfactant proteins (SPs) by mass. Although they constitute the minor fraction, SPs to a large extent orchestrate PS-related functions. PS contains four surfactant proteins (SPs) that can be structurally and functionally divided in two groups, i.e. the large hydrophilic SP-A and SP-D and the smaller hydrophobic SP-B and SP-C. The former belong to the family of collectins and are involved in opsonization processes, thus promoting uptake of pathogens and (nano)particles by phagocytic cell types. The latter SPs regulate interfacial surfactant adsorption dynamics, facilitating (phospho)lipid transfer and membrane fusion processes. In the context of pulmonary drug delivery, the exploitation of PS as a carrier to promote drug spreading along the alveolar interface is gaining interest. In addition, recent studies investigated the interaction of PS with drug-loaded nanoparticles (nanomedicines) following pulmonary administration, which strongly influences their biological fate, drug delivery efficiency and toxicological profile. Interestingly, the specific biophysical mode-of-action of the four SPs affect the drug delivery process of nanomedicines both on the extra-and intracellular level, modulating pulmonary distribution, cell targeting and intracellular delivery. This knowledge can be harnessed to exploit SPs for the design of unique and bio-inspired drug delivery strategies.

Peripheral Membrane Proteins Facilitate Nanoparticle Binding at Lipid Bilayer Interfaces

Molecular understanding of the impact of nanomaterials on cell membranes is critical for the prediction of effects that span environmental exposures to nanoenabled therapies. Experimental and computational studies employing phospholipid bilayers as model systems for membranes have yielded important insights but lack the biomolecular complexity of actual membranes. Here, we increase model membrane complexity by incorporating the peripheral membrane protein cytochrome c and studying the interactions of the resulting membrane systems with two types of anionic nanoparticles. Experimental and computational studies reveal that the extent of cytochrome c binding to supported lipid bilayers depends on anionic phospholipid number density and headgroup chemistry. Gold nanoparticles functionalized with short, anionic ligands or wrapped with an anionic polymer do not interact with silica-supported bilayers composed solely of phospholipids. Strikingly, when cytochrome c was bound to these bilayers, nanoparticles functionalized with short anionic ligands attached to model biomembranes in amounts proportional to the number of bound cytochrome c molecules. In contrast, anionic polymer-wrapped gold nanoparticles appeared to remove cytochrome c from supported lipid bilayers in a manner inversely proportional to the strength of cytochrome c binding to the bilayer; this reflects the removal of a weakly bound pool of cytochrome c, as suggested by molecular dynamics simulations. These results highlight the importance of the surface chemistry of both the nanoparticle and the membrane in predicting nano-bio interactions.

Compatibility of PEGylated Polymer Nanoparticles with the Biophysical Function of Lung Surfactant

To minimize an unwanted interference of colloidal drug delivery vehicles with the biophysical functionality of lung surfactant, the surface of polymer nanoparticles was modified with poly(ethylene glycol) (PEGylation). Plain poly(lactide) nanoparticles provoked a statistically relevant decrease in the surface activity of the naturally derived lung surfactant, Alveofact. By contrast, the extent of lung surfactant inhibition induced by PEGylated polymer nanoparticles was significantly attenuated. Here, escalations of the PEG coating layer thickness (>3 nm, with a chain-to-chain distance of ≤4 nm) on the colloidal surface were capable of circumventing bioadverse effects. Accordingly, polymer nanoparticles equipped with PEG chains with a molecular weight above 2-5 kDa were compatible with the biophysical function of Alveofact. Overall, PEGylation of polymer nanoparticles presents a promising approach for the development of inhalation nanomedicines revealing negligible effects on the surface activity of the lining layer present in the deep lungs.

Nebulizing novel multifunctional nanovesicles: the impact of macrophage-targeted-pH-sensitive archaeosomes on a pulmonary surfactant

In this study, a NE-U22 vibrating mesh Omron nebulizer was used to deliver the Lissamine™ rhodamine B 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine triethylammonium salt (Rh-PE) and 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS)/p-xylene-bis-pyridinium bromide (DPX) double-labelled macrophage-targeted pH-sensitive archaeosomes (ApH, 174 ± 48 nm, -30 ± 13 mV unilamellar nanovesicles made of dioleoyl-sn-glycero-3-phosphoethanolamine: [total polar archaeolipids from the hyperhalophile archaebacteria Halorubrum tebenquichense]: cholesteryl hemisuccinate 4.2 : 2.8 : 3 w : w : w) to J774A.1 cells covered by a Prosurf pulmonary surfactant (PS) monolayer at or below the equilibrium surface pressure πe. The uptake and cytoplasmic drug release from ApH were assessed by flow cytometry of Rh-PE and HPTS fluorescence, respectively. Despite being soft matter, nanovesicles are submitted to the dismantling interactions of shear stress of nebulization and contact with the surfactant barrier, and at least a fraction of nebulized ApH was found to be stable enough to execute higher cytoplasmic delivery than archaeolipid-lacking vesicles. Nebulized ApH increased the PS tensioactivity to just below πe, which was beyond the physiological range; this finding indicated that changes in lung surfactant function induced by nebulized nanovesicles were less likely to occur in vivo. The cytoplasmic delivery from ApH slightly decreased across monolayers at πe; this suggested that nanovesicles crossed the PS in a fashion inversely related to monolayer compression. Laurdan generalized polarization and fluorescence anisotropy were used to reveal that nanovesicles neither depleted B and C proteins of the PS nor increased the fluidity of the PS. Together with the feasibility of the cytoplasmic drug delivery upon nebulization, our results suggest that ApH are structurally unique nanovesicles that would not induce biophysical changes leading to PS inactivation and open the door to deeper future translational studies.

Changes to DPPC Domain Structure in the Presence of Carbon Nanoparticles

DPPC (dipalmitoylphosphatidylcholine) is a disaturated lipid capable of forming closely packed monolayers at the air-liquid interface of the lung and allows the surface tension within the alveoli to reduce to almost zero and thus prevent alveolar collapse. Carbon nanoparticles are formed in natural and man-made combustion events, including diesel engines, and are capable of reaching the alveolar epithelium during breathing. In this work, we have used Brewster angle microscopy and neutron reflectivity to study the effect of differing concentrations of carbon nanoparticles on the structure of DPPC monolayer as the monolayer is subject to compression and expansion. The results show that the inclusion of carbon nanoparticles within a DPPC monolayer affects the formation and structure of the lipid domains. The domains lose their circular structure and show a crenated structure as well as a reduction in overall size of the domains. This change in structure is also evident following expansion of the lipid monolayer, suggesting that some carbon nanoparticles may remain associated with the monolayer. This observation could have an important implication regarding the removal of nanosized airborne pollutants from the human lung.

Poloxamer-Decorated Polymer Nanoparticles for Lung Surfactant Compatibility

Lung-delivered polymer nanoparticles provoked dysfunction of the essential lung surfactant system. A steric shielding of the nanoparticle surface with poloxamers could minimize the unwanted interference of polymer nanoparticles with the biophysical function of lung surfactant. The extent of poly(styrene) and poly(lactide) nanoparticle-induced lung surfactant inhibition could be related to the type and content of the applied poloxamer. Escalations of the adsorbed coating layer thickness (>3 nm) as well as concentration (brush- rather than mushroom-like conformation of poly(ethylene glycol), chain-to-chain distance of <5 nm) on the colloidal surface were capable of circumventing bioadverse effects. Accordingly, specific formulations (i.e., poloxamer 188, 338, and 407) avoided a perturbation of the microstructure and surface activity of Alveofact and a depletion of the content of surfactant-associated proteins. Poloxamer-modified polymer nanoparticles represent a promising nanomedicine platform intended for respiratory delivery revealing negligible effects on the biophysical functionality of the lining layer present in the deep lungs.

Impact of triblock copolymers on the biophysical function of naturally-derived lung surfactant

The current study aimed at investigating the general applicability of triblock copolymers consisting of poly(ethylene glycol) and poly(propylene glycol) (Pluronic^®) as excipients for lung delivery. After thorough physicochemical characterization of the diverse polymers, their cytotoxicity was evaluated using alveolar epithelial cells. Next, a naturally-derived lung surfactant was challenged with the distinct triblock copolymers with respect to changes in microstructure, adsorption to the air/liquid interface and dynamic surface tension behavior under bubble pulsation. Biocompatibility assessment of triblock copolymers in A549 cells demonstrated some cytotoxicity, dependent on the hydrophobicity and dose of the substance applied (effective at ≥0.1mg/ml). Supplementing triblock copolymers onto Alveofact^® had an obvious influence on the aggregation state and surface activity (>25 and >5mN/m during adsorption and bubble pulsation, respectively) of the lung surfactant. Interestingly, Pluronic^® F127, a rather hydrophilic triblock copolymer, showed the most intense effect on the microstructure and biophysical performance of Alveofact^®. This is likely due to the synergistic interplay of its low critical micelle concentration and rather high molecular weight, leading to the penetration of lung surfactant film/vesicles and accompanied by a partial replacement of relevant surfactant components from the air/liquid interface. Overall, suitable compositions and concentrations of triblock copolymers were identified with respect to compatibility with the physiological environment of the deep lungs.

Unveiling the Molecular Structure of Pulmonary Surfactant Corona on Nanoparticles

The growing risk of human exposure to airborne nanoparticles (NPs) causes a general concern on the biosafety of nanotechnology. Inhaled NPs can deposit in the deep lung at which they interact with the pulmonary surfactant (PS). Despite the increasing study of nano-bio interactions, detailed molecular mechanisms by which inhaled NPs interact with the natural PS system remain unclear. Using coarse-grained molecular dynamics simulation, we studied the interaction between NPs and the PS system in the alveolar fluid. It was found that regardless of different physicochemical properties, upon contacting the PS, both silver and polystyrene NPs are immediately coated with a biomolecular corona that consists of both lipids and proteins. Structure and molecular conformation of the PS corona depend on the hydrophobicity of the pristine NPs. Quantitative analysis revealed that lipid composition of the corona formed on different NPs is relatively conserved and is similar to that of the bulk phase PS. However, relative abundance of the surfactant-associated proteins, SP-A, SP-B, and SP-C, is notably affected by the hydrophobicity of the NP. The PS corona provides the NPs with a physicochemical barrier against the environment, equalizes the hydrophobicity of the pristine NPs, and may enhance biorecognition of the NPs. These modifications in physicochemical properties may play a crucial role in affecting the biological identity of the NPs and hence alter their subsequent interactions with cells and other biological entities. Our results suggest that all studies of inhalation nanotoxicology or NP-based pulmonary drug delivery should consider the influence of the PS corona.

Pulmonary surfactant and nanocarriers: Toxicity versus combined nanomedical applications

Pulmonary surfactant is a membrane-based lipid-protein system essential for the process of breathing, which coats and stabilizes the whole respiratory surface and possesses exceptional biophysical properties. It constitutes the first barrier against the entry of pathogens and harmful particles in the alveolar region, extended through the lungs, but on the other hand, it can offer novel possibilities as a shuttle for the delivery of drugs and nanocarriers. The advances in nanotechnology are opening the doors to new diagnostic and therapeutic avenues, which are not accessible by means of the current approaches. In this context, the pulmonary route is called to become a powerful way of entry for innovative treatments based on nanotechnology. In this review, the anatomy of the respiratory system and its properties for drug entry are first revisited, as well as some current strategies that use the respiratory route for both local and peripheral action. Then, a brief overview is presented on what pulmonary surfactant is, how it works and why it could be used as a drug delivery vehicle. Finally, the review is closed with a description of the development of nanocarriers in the lung context and their interaction with endogenous and clinical pulmonary surfactants. This article is part of a Special Issue entitled: Membrane Lipid Therapy: Drugs Targeting Biomembranes edited by Pablo V. Escribá.

Adsorption and Co-Adsorption of Polyaldehyde Dextran Nanoparticles and Nonionic Surfactant at an Air–Water Interface: Potential Implications for Pulmonary Drug Delivery

Measurements of dynamic surface tension were carried out in aqueous systems (water or 0.1 mM Triton X-100) comprising nanoparticles formed from chemically modified polyaldehyde dextran (PAD). The nanostructures, considered as potential drug carriers in aerosol therapy, were obtained from biocompatible polysaccharides by successive oxidation and reactive coiling in an aqueous solution. The dynamic surface tension of the samples was determined by the maximum bubble pressure (MBP) method and by the axisymmetric drop shape analysis (ADSA). Experiments with harmonic area perturbations were also carried out in order to determine surface dilatational viscoelasticity. PAD showed a remarkable surface activity. Ward-Tordai equation was used to determine the equilibrium surface tension and diffusion coefficient of PAD nanoparticles (D = 2.3×10-6 m2/s). In a mixture with Triton X-100, PAD particles showed co-adsorption and synergic effect in surface tension reduction at short times (below 10 s). Tested nanoparticles had impact on surface rheology in a mixed system with nonionic surfactant, suggesting their possible interactions with the lung surfactant system after inhalation. This preliminary investigation sets the methodological approach for further research related to the influence of inhaled PAD nanoparticles on the lung surfactant and mass transfer processes in the respiratory system.

Biophysical Activity of Impaired Lung Surfactant upon Exposure to Polymer Nanoparticles

Colloidal drug carriers could improve the therapy of numerous airway diseases. However, it remains unclear to what extent nanoscale particulate matter affects the biophysical function of the essential surface-active lining layer of the lungs, especially under predisposed conditions of airway diseases. Accordingly, the current study investigated the impact of defined polymer nanoparticles on impaired lung surfactants. Admixtures of plasma proteins (albumin and fibrinogen) to Curosurf led to a controllable decrease in surface activity (i.e., adsorption and minimal surface tension of >25 and >5 mN/m, respectively), which served as models for dysfunctional lung surfactants. Next, Curosurf preincubated with plasma proteins was challenged with negatively- and positively charged poly(lactide) nanoparticles. Negatively charged nanoparticles significantly perturbed the biophysical function of impaired Curosurf in a dose-dependent manner, most-likely due to a binding of essential surfactant components. By contrast, addition of positively charged nanoparticles led to no further loss of surface activity, but a remarkable depletion of plasma protein content. Once adsorbed to the surface of polymer nanoparticles, plasma proteins were hindered to displace relevant surfactant components from the air/liquid interface. Overall, the current study indicated that, depending on their physicochemical properties, colloidal drug carriers could compromise the biophysical function of impaired lung surfactants. Notably, a positive surface charge represents a parameter for the rationale design of polymer nanomedicines causing negligible adverse events on an impaired surface-active lining layer in the lungs.

The role of natural processes and surface energy of inhaled engineered nanoparticles on aggregation and corona formation

The surface chemistry of engineered nanoparticles (ENPs) becomes more important as their size decreases and enters the nanometer-range. This review explains the fundamental properties of the surface chemistry of nanoparticles, and argues that their agglomeration and the formation of corona around them are natural processes that reduce surface energy. ENP agglomeration and surface corona formation are further discussed in the context of inhaled ENPs, as the lung is a major port of ENP entry to the body. The pulmonary surfactant layer, which the inhaled ENPs first encounter as they land on the lung surface, represents a unique environment with a variety of well-defined biomolecules. Many factors, such as hydrophobicity, surface charge of ENPs, protein/phospholipid concentrations of the alveolar lining fluid, etc. influence the complex processes of ENP agglomeration and corona formation in the alveolar lining fluid, and these events occur even before the ENPs reach the cells. We suggest that molecular dynamic simulations can represent a promising future direction for research of the behavior of inhaled ENPs, complementing the experimental approaches. Moreover, we want to remind biologists working on ENPs of the importance relationship between ENP surface energy and size.

Proteomic and Lipidomic Analysis of Nanoparticle Corona upon Contact with Lung Surfactant Reveals Differences in Protein, but Not Lipid Composition

Pulmonary surfactant (PS) constitutes the first line of host defense in the deep lung. Because of its high content of phospholipids and surfactant specific proteins, the interaction of inhaled nanoparticles (NPs) with the pulmonary surfactant layer is likely to form a corona that is different to the one formed in plasma. Here we present a detailed lipidomic and proteomic analysis of NP corona formation using native porcine surfactant as a model. We analyzed the adsorbed biomolecules in the corona of three NP with different surface properties (PEG-, PLGA-, and Lipid-NP) after incubation with native porcine surfactant. Using label-free shotgun analysis for protein and LC-MS for lipid analysis, we quantitatively determined the corona composition. Our results show a conserved lipid composition in the coronas of all investigated NPs regardless of their surface properties, with only hydrophilic PEG-NPs adsorbing fewer lipids in total. In contrast, the analyzed NP displayed a marked difference in the protein corona, consisting of up to 417 different proteins. Among the proteins showing significant differences between the NP coronas, there was a striking prevalence of molecules with a notoriously high lipid and surface binding, such as, e.g., SP-A, SP-D, DMBT1. Our data indicate that the selective adsorption of proteins mediates the relatively similar lipid pattern in the coronas of different NPs. On the basis of our lipidomic and proteomic analysis, we provide a detailed set of quantitative data on the composition of the surfactant corona formed upon NP inhalation, which is unique and markedly different to the plasma corona.

Effects of graphene oxide nanosheets on the ultrastructure and biophysical properties of the pulmonary surfactant film

Graphene oxide (GO) is the most common derivative of graphene and has been used in a large range of biomedical applications. Despite considerable progress in understanding its cytotoxicity, its potential inhalation toxicity is still largely unknown. As the pulmonary surfactant (PS) film is the first line of host defense, interaction with the PS film determines the fate of the inhaled nanomaterials and their potential toxicity. Using a coarse-grained molecular dynamics model, we reported, for the first time, a novel mechanism of toxicity caused by the inhaled GO nanosheets. Upon deposition, the GO nanosheets induce pores in the PS film and thus have adverse effects on the ultrastructure and biophysical properties of the PS film. Notably, the pores induced by GO nanosheets result in increasing the compressibility of the PS film, which is an important indication of surfactant inhibition. In vitro experiments have also been conducted to study the interactions between GO and animal-derived natural PS films, qualitatively confirming the simulation results.

Effects of nanoparticles on the mechanical functioning of the lung

Nanotechnology is a rapidly expanding field that has very promising applications that will improve industry, medicine, and consumer products. However, despite the growing widespread use of engineered nanoparticles in these areas, very little has been done to assess the potential health risks they may pose to high-risk areas of the body, particularly the lungs. In this review we first briefly discuss the structure of the lungs and establish that the pulmonary surfactant (PS), given its vulnerability and huge contribution to healthy lung function, is a mechanism of great concern when evaluating potential nanoparticle interactions within the lung. To warrant that these interactions can occur, studies on the transport of nanoaerols are reviewed to highlight that a plethora of factors contribute to a nanoparticle's ability to travel to the deep regions of the lung where PS resides. The focus of this review is to determine the extent that physicochemical characteristics of nanoparticles such as size, hydrophobicity, and surface charge effect PS function. Numerous nanoparticle types are taken into consideration in order to effectively evaluate observed consistencies across numerous nanoparticle types and develop general trends that exist among the physicochemical characteristics of interest. Biological responses from other mechanisms/components of the lung are briefly discussed to provide further insights on how the toxicology of different nanoparticles is determined. We conclude by discussing general trends that summarize consistencies observed among the studies in regard to physicochemical properties and their effects on monolayer function, addressing current gaps in our understanding, and discussing the future outlook of this field of research.

Biophysical influence of airborne carbon nanomaterials on natural pulmonary surfactant

Inhalation of nanoparticles (NP), including lightweight airborne carbonaceous nanomaterials (CNM), poses a direct and systemic health threat to those who handle them. Inhaled NP penetrate deep pulmonary structures in which they first interact with the pulmonary surfactant (PS) lining at the alveolar air-water interface. In spite of many research efforts, there is a gap of knowledge between in vitro biophysical study and in vivo inhalation toxicology since all existing biophysical models handle NP-PS interactions in the liquid phase. This technical limitation, inherent in current in vitro methodologies, makes it impossible to simulate how airborne NP deposit at the PS film and interact with it. Existing in vitro NP-PS studies using liquid-suspended particles have been shown to artificially inflate the no-observed adverse effect level of NP exposure when compared to in vivo inhalation studies and international occupational exposure limits (OELs). Here, we developed an in vitro methodology called the constrained drop surfactometer (CDS) to quantitatively study PS inhibition by airborne CNM. We show that airborne multiwalled carbon nanotubes and graphene nanoplatelets induce a concentration-dependent PS inhibition under physiologically relevant conditions. The CNM aerosol concentrations controlled in the CDS are comparable to those defined in international OELs. Development of the CDS has the potential to advance our understanding of how submicron airborne nanomaterials affect the PS lining of the lung.

Barrier or carrier? Pulmonary surfactant and drug delivery

To consider the lung as a target for drug delivery and to optimise strategies directed at the pulmonary route, it is essential to consider the role of pulmonary surfactant, a thin lipid-protein film lining the respiratory surface of mammalian lungs. Membrane-based surfactant multilayers are essential for reducing the surface tension at the respiratory air-liquid interface to minimise the work of breathing. Different components of surfactant are also responsible for facilitating the removal of potentially pathological entities such as microorganisms, allergens or environmental pollutants and particles. Upon inhalation, drugs or nanoparticles first contact the surfactant layer, and these interactions critically affect their lifetime and fate in the airways. This review summarises the current knowledge on the possible role and effects of the pulmonary surfactant system in drug delivery strategies. It also summarises the evidence that suggests that pulmonary surfactant is far from being an insuperable barrier and could be used as an efficient shuttle for delivering hydrophobic and hydrophilic compounds deep into the lung and the organism.

Calf Lung Surfactant Recovers Surface Functionality After Exposure to Aerosols Containing Polymeric Particles

BACKGROUND

Recent studies have shown that colloidal particles can disrupt the interfacial properties of lung surfactant and thus key functional abilities of lung surfactant. However, the mechanisms underlying the interactions between aerosols and surfactant films remain poorly understood, as our ability to expose films to particles via the aerosol route has been limited. The aim of this study was to develop a method to reproducibly apply aerosols with a quantifiable particle dose on lung surfactant films and investigate particle-induced changes to the interfacial properties of the surfactant under conditions that more closely mimic those in vivo.

METHODS

Films of DPPC and Infasurf^® were exposed to aerosols containing polystyrene particles generated using a Dry Powder Insufflator^™. The dose of particles deposited on surfactant films was determined via light absorbance. The interfacial properties of the surfactant were studied using a Langmuir-Wilhelmy balance during surfactant compression to film collapse and cycles of surface compression and expansion at a fast cycling rate within a small surface area range.

RESULTS

Exposure of surfactant films to aerosols led to reproducible dosing of particles on the films. In film collapse experiments, particle deposition led to slight changes in collapse surface pressure and surface area of both surfactants. However, longer interaction times between particles and Infasurf^® films resulted in time-dependent inhibition of surfactant function. When limited to lung relevant surface pressures, particles reduced the maximum surface pressure that could be achieved. This inhibitory effect persisted for all compression-expansion cycles in DPPC, but normal surfactant behavior was restored in Infasurf^® films after five cycles.

CONCLUSIONS

The observation that Infasurf^® was able to quickly restore its function after exposure to aerosols under conditions that better mimicked those in vivo suggests that particle-induced surfactant inhibition is unlikely to occur in vivo due to an aerosol exposure.

Shape affects the interactions of nanoparticles with pulmonary surfactant

The interactions with the pulmonary surfactant, the initial biological barrier of respiratory pathway, determine the potential therapeutic applications and toxicological effects of inhaled nanoparticles (NPs). Although much attention has been paid to optimize the physicochemical properties of NPs for improved delivery and targeting, shape effects of the inhaled NPs on their interactions with the pulmonary surfactant are still far from clear. Here, we studied the shape effects of NPs on their penetration abilities and structural disruptions to the dipalmitoyl-phosphatidylcholine (DPPC) monolayer (being model pulmonary surfactant film) using coarse-grained molecular dynamics simulations. It is found that during the inspiration process (i.e., surfactant film expansion), shape effects are negligible. However, during the expiration process (i.e., surfactant film compression), NPs of different shapes show various penetration abilities and degrees of structural disruptions to the DPPC monolayer. We found that rod-like NPs showed the highest degree of penetration and the smallest side-effects to the DPPC monolayer. Our results may provide a useful insight into the design of NPs for respiratory therapeutics.

Biophysical inhibition of pulmonary surfactant function by polymeric nanoparticles: role of surfactant protein B and C

The current study investigated the mechanisms involved in the process of biophysical inhibition of pulmonary surfactant by polymeric nanoparticles (NP). The minimal surface tension of diverse synthetic surfactants was monitored in the presence of bare and surface-decorated (i.e. poloxamer 407) sub-100 nm poly(lactide) NP. Moreover, the influence of NP on surfactant composition (i.e. surfactant protein (SP) content) was studied. Dose-elevations of SP advanced the biophysical activity of the tested surfactant preparation. Surfactant-associated protein C supplemented phospholipid mixtures (PLM-C) were shown to be more susceptible to biophysical inactivation by bare NP than phospholipid mixture supplemented with surfactant protein B (PLM-B) and PLM-B/C. Surfactant function was hindered owing to a drastic depletion of the SP content upon contact with bare NP. By contrast, surface-modified NP were capable of circumventing unwanted surfactant inhibition. Surfactant constitution influences the extent of biophysical inhibition by polymeric NP. Steric shielding of the NP surface minimizes unwanted NP-surfactant interactions, which represents an option for the development of surfactant-compatible nanomedicines.

Nanoparticle-mediated pulmonary drug delivery: a review

Colloidal drug delivery systems have been extensively investigated as drug carriers for the application of different drugs via different routes of administration. Systems, such as solid lipid nanoparticles, polymeric nanoparticles and liposomes, have been investigated for a long time for the treatment of various lung diseases. The pulmonary route, owing to a noninvasive method of drug administration, for both local and systemic delivery of an active pharmaceutical ingredient (API) forms an ideal environment for APIs acting on pulmonary diseases and disorders. Additionally, this route offers many advantages, such as a high surface area with rapid absorption due to high vascularization and circumvention of the first pass effect. Aerosolization or inhalation of colloidal systems is currently being extensively studied and has huge potential for targeted drug delivery in the treatment of various diseases. Furthermore, the surfactant-associated proteins present at the interface enhance the effect of these formulations by decreasing the surface tension and allowing the maximum effect. The most challenging part of developing a colloidal system for nebulization is to maintain the critical physicochemical parameters for successful inhalation. The following review focuses on the current status of different colloidal systems available for the treatment of various lung disorders along with their characterization. Additionally, different in vitro, ex vivo and in vivo cell models developed for the testing of these systems with studies involving cell culture analysis are also discussed.