Structural optimization of SadA, an Fe(II)- and α-ketoglutarate-dependent dioxygenase targeting biocatalytic synthesis of N-succinyl-L-threo-3,4-dimethoxyphenylserine

Site-selective benzylic C-H hydroxylation in electron-deficient azaheterocycles

Benzylic C-H bonds can be converted into numerous functional groups, often by mechanisms that involve hydrogen atom transfer as the key bond breaking step. The abstracting species is most often an electrophilic radical, which makes these reactions best suited to electron-rich C-H bonds to achieve appropriate polarity matching. Thus, electron deficient systems such as pyridine and pyrimidine are relatively unreactive, and therefore underrepresented in substrate scopes. In this report, we describe a new method for heterobenzylic hydroxylation-essentially an unknown reaction in the case of pyrimidines-that makes use of an iodine(III) reagent to afford very high selectivity towards electron-deficient azaheterocycles in substrates with more than one reactive position and prevents over-oxidation to carbonyl products. The identification of key reaction byproducts supports a mechanism that involves radical coupling in the bond forming step.

Directed Evolution of an Iron(II)- and α-Ketoglutarate-Dependent Dioxygenase for Site-Selective Azidation of Unactivated Aliphatic C-H Bonds

FeII - and α-ketoglutarate-dependent halogenases and oxygenases can catalyze site-selective functionalization of C-H bonds via a variety of C-X bond forming reactions, but achieving high chemoselectivity for functionalization using non-native functional groups remains rare. The current study shows that directed evolution can be used to engineer variants of the dioxygenase SadX that address this challenge. Site-selective azidation of succinylated amino acids and a succinylated amine was achieved as a result of mutations throughout the SadX structure. The installed azide group was reduced to a primary amine, and the succinyl group required for azidation was enzymatically cleaved to provide the corresponding amine. These results provide a promising starting point for evolving additional SadX variants with activity on structurally distinct substrates and for enabling enzymatic C-H functionalization with other non-native functional groups.

Non-Native Anionic Ligand Binding and Reactivity in Engineered Variants of the Fe(II)- and α-Ketoglutarate-Dependent Oxygenase, SadA

Mononuclear non-heme Fe(II)- and α-ketoglutarate-dependent oxygenases (FeDOs) catalyze a site-selective C-H hydroxylation. Variants of these enzymes in which a conserved Asp/Glu residue in the Fe(II)-binding facial triad is replaced by Ala/Gly can, in some cases, bind various anionic ligands and catalyze non-native chlorination and bromination reactions. In this study, we explore the binding of different anions to an FeDO facial triad variant, SadX, and the effects of that binding on HO• vs X• rebound. We establish not only that chloride and bromide enable non-native halogenation reactions but also that all anions investigated, including azide, cyanate, formate, and fluoride, significantly accelerate and influence the site selectivity of SadX hydroxylation catalysis. Azide and cyanate also lead to the formation of products resulting from N3•, NCO•, and OCN• rebound. While fluoride rebound is not observed, the rate acceleration provided by this ligand leads us to calculate barriers for HO• and F• rebound from a putative Fe(III)(OH)(F) intermediate. These calculations suggest that the lack of fluorination is due to the relative barriers of the HO• and F• rebound transition states rather than an inaccessible barrier for F• rebound. Together, these results improve our understanding of the FeDO facial triad variant tolerance of different anionic ligands, their ability to promote rebound involving these ligands, and inherent rebound preferences relative to HO• that will aid efforts to develop non-native catalysis using these enzymes.

Oxygenating Biocatalysts for Hydroxyl Functionalisation in Drug Discovery and Development

C-H oxyfunctionalisation remains a distinct challenge for synthetic organic chemists. Oxygenases and peroxygenases (grouped here as "oxygenating biocatalysts") catalyse the oxidation of a substrate with molecular oxygen or hydrogen peroxide as oxidant. The application of oxygenating biocatalysts in organic synthesis has dramatically increased over the last decade, producing complex compounds with potential uses in the pharmaceutical industry. This review will focus on hydroxyl functionalisation using oxygenating biocatalysts as a tool for drug discovery and development. Established oxygenating biocatalysts, such as cytochrome P450s and flavin-dependent monooxygenases, have widely been adopted for this purpose, but can suffer from low activity, instability or limited substrate scope. Therefore, emerging oxygenating biocatalysts which offer an alternative will also be covered, as well as considering the ways in which these hydroxylation biotransformations can be applied in drug discovery and development, such as late-stage functionalisation (LSF) and in biocatalytic cascades.

Efficient Biosynthesis of High-Value Succinic Acid and 5-Hydroxyleucine Using a Multienzyme Cascade and Whole-Cell Catalysis

Succinic acid (SA) is applied in the food, chemical, and pharmaceutical industries. 5-Hydroxyleucine (5-HLeu) is a promising precursor for the biosynthesis of antituberculosis drugs. Here, we designed a promising synthetic route for the simultaneous production of SA and 5-HLeu by combining l-leucine dioxygenase (NpLDO), l-glutamate oxidase (LGOX), and catalase (CAT). Two bioconversion systems: "a multienzyme cascade catalysis in vitro" (MECCS) and "whole-cell catalysis system" (WCCS) were constructed. A high-activity NpLDO mutant was screened by error-prone polymerase chain reaction (PCR) and showed 6.1-fold improvement of catalytic activity. After optimization of reaction conditions, MECSS yielded 3.15 g/L SA and 3.92 g/L 5-HLeu, while the production of SA and 5-HLeu by the most effective WCSS reached 15.12 and 18.83 g/L, respectively. This is the first attempt to use ferrous iron/α-ketoglutarate-dependent dioxygenases for the simultaneous production of SA and hydroxy-amino-acid. This research provides a tool for industrial production of food of high-value products from low-cost raw materials.

Redesign of a novel D-allulose 3-epimerase from Staphylococcus aureus for thermostability and efficient biocatalytic production of D-allulose

BACKGROUND

A novel D-allulose 3-epimerase from Staphylococcus aureus (SaDAE) has been screened as a D-allulose 3-epimerase family enzyme based on its high specificity for D-allulose. It usually converts both D-fructose and D-tagatose to respectively D-allulose and D-sorbose. We targeted potential biocatalysts for the large-scale industrial production of rare sugars.

RESULTS

SaDAE showed a high activity on D-allulose with an affinity of 41.5 mM and catalytic efficiency of 1.1 s-1 mM-1. Four residues, Glu146, Asp179, Gln205, and Glu240, constitute the catalytic tetrad of SaDAE. Glu146 and Glu240 formed unique interactions with substrates based on the structural model analysis. The redesigned SaDAE_V105A showed an improvement of relative activity toward D-fructose of 68%. The conversion rate of SaDAE_V105A reached 38.9% after 6 h. The triple mutant S191D/M193E/S213C showed higher thermostability than the wild-type enzyme, exhibiting a 50% loss of activity after incubation for 60 min at 74.2 °C compared with 67 °C for the wild type.

CONCLUSIONS

We redesigned SaDAE for thermostability and biocatalytic production of D-allulose. The research will aid the development of industrial biocatalysts for D-allulose.

Industrial Application of 2-Oxoglutarate-Dependent Oxygenases

C–H functionalization is a chemically challenging but highly desirable transformation. 2-oxoglutarate-dependent oxygenases (2OGXs) are remarkably versatile biocatalysts for the activation of C–H bonds. In nature, they have been shown to accept both small and large molecules carrying out a plethora of reactions, including hydroxylations, demethylations, ring formations, rearrangements, desaturations, and halogenations, making them promising candidates for industrial manufacture. In this review, we describe the current status of 2OGX use in biocatalytic applications concentrating on 2OGX-catalyzed oxyfunctionalization of amino acids and synthesis of antibiotics. Looking forward, continued bioinformatic sourcing will help identify additional, practical useful members of this intriguing enzyme family, while enzyme engineering will pave the way to enhance 2OGX reactivity for non-native substrates.

Redesign and engineering of a dioxygenase targeting biocatalytic synthesis of 5-hydroxyl leucine

The protein engineering and metabolic engineering strategies are performed to solve rate-limiting steps in the biosynthesis of 5-HLeu.

Conformational transition pathway of R308K mutant glucokinase in the presence of the glucokinase activator YNKGKA4

Glucokinase (GK) plays a vital role in the control of blood glucose levels and its altered activity can lead to the development of forms of diabetes. We have previously identified a mutant GK (R308K) in patients with type 2 diabetes with reduced enzyme activity. In the present study, the activation mechanism of GK from super‐open to the closed state under wild‐type and mutant conditions in the presence of the novel aminophosphonate derivative YNKGKA4 (an allosteric activator of GK) was characterized via a series of molecular dynamics simulations. A reliable conformational transition pathway of GK was observed from super‐open to closed state during trajectory analysis. Glucose was also observed to modulate its binding orientation in the active site but with stable moments in the cavity. These observations provide insights into the complicated conformational transitions in the presence of YNKGKA4 and the molecular mechanism of GK activators for the allosteric regulation of mutant forms of GK.

Rational design of cholesterol oxidase for efficient bioresolution of cholestane skeleton substrates

Cholesterol oxidase catalyzes the oxidation and isomerization of the cholestane substrates leading to the addition of a hydroxyl group at the C3 position. Rational engineering of the cholesterol oxidase from Pimelobacter simplex (PsChO) was performed. Mutagenesis of V64 and F70 improved the catalytic activities toward cholestane substrates. Molecular dynamics simulations, together with structure-activity relationship analysis, revealed that both V64C and F70V increased the binding free energy between PsChO mutants and cholesterol. F70V and V64C mutations might cause the movement of loops L56-P77, K45-P49 and L350-E354 at active site. They enlarged the substrate-binding cavity and relieved the steric interference with substrates facilitating recognition of C17 hydrophobic substrates with long side chain substrates.

Structural analysis of enzymes used for bioindustry and bioremediation

Microbial enzymes have been widely applied in the large-scale, bioindustrial manufacture of food products and pharmaceuticals due to their high substrate specificity and stereoselectivity, and their effectiveness under mild conditions with low environmental burden. At the same time, bioremedial techniques using microbial enzymes have been developed to solve the problem of industrial waste, particularly with respect to persistent chemicals and toxic substances. And finally, structural studies of these enzymes have revealed the mechanistic basis of enzymatic reactions, including the stereoselectivity and binding specificity of substrates and cofactors. The obtained structural insights are useful not only to deepen our understanding of enzymes with potential bioindustrial and/or bioremedial application, but also for the functional improvement of enzymes through rational protein engineering. This review shows the structural bases for various types of enzymatic reactions, including the substrate specificity accompanying cofactor-controlled and kinetic mechanisms.