Thrombin, kallikrein and complement C5b-9 adsorption on hydrophilic and hydrophobic titanium and glass after short time exposure to whole blood

Surface Free Energy and Composition Changes and Ob Cellular Response to CHX-, PVPI-, and ClO2-Treated Titanium Implant Materials

The study evaluated the interaction of a titanium dental implant surface with three different antibacterial solutions: chlorhexidine, povidone-iodine, and chlorine dioxide. Implant surface decontamination is greatly challenging modern implant dentistry. Alongside mechanical cleaning, different antibacterial agents are widely used, though these could alter implant surface properties. Commercially pure (CP) grade 4 titanium (Ti) discs were treated with three different chemical agents (chlorhexidine 0.2% (CHX), povidone-iodine 10% (PVPI), chlorine dioxide 0.12% (ClO₂)) for 5 min. Contact angle measurements, X-ray photoelectron spectroscopy (XPS) analysis, and cell culture studies were performed. Attachment and proliferation of primary human osteoblast cells were investigated via MTT (dimethylthiazol-diphenyl tetrazolium bromide), alamarBlue, LDH (lactate dehydrogenase), and fluorescent assays. Contact angle measurements showed that PVPI-treated samples (Θ = 24.9 ± 4.1) gave no difference compared with controls (Θ = 24.6 ± 5.4), while CHX (Θ = 47.2 ± 4.1) and ClO₂ (Θ = 39.2 ± 9.8) treatments presented significantly higher Θ values. All samples remained in the hydrophilic region. XPS analysis revealed typical surface elements of CP grade 4 titanium (Ti, O, and C). Both MTT and alamarBlue cell viability assays showed similarity between treated and untreated control groups. The LDH test revealed no significant difference, and fluorescent staining confirmed these results. Although there was a difference in surface wettability, a high proliferation rate was observed in all treated groups. The in vitro study proved that CHX, PVPI, and ClO₂ are proper candidates as dental implant decontamination agents.

Blood Compatibility of ZrO₂ Particle Reinforced PEEK Coatings on Ti6Al4V Substrates

Titanium (Ti) and its alloys are widely used in biomedical devices. As biomaterials, the blood compatibility of Ti and its alloys is important and needs to be further improved to provide better functionality. In this work, we studied the suitability of zirconia (ZrO₂) particle reinforced poly-ether-ether-ketone (PEEK) coatings on Ti6Al4V substrates for blood-contacting implants. The wettability, surface roughness and elastic modulus of the coatings were examined. Blood compatibility tests were conducted by erythrocytes observation, hemolysis assay and clotting time of recalcified human plasma, to find out correlations between the microstructure of the ZrO₂-filled PEEK composite coatings and their blood compatibilities. The results suggested that adding ZrO₂ nanoparticles increased the surface roughness and improved the wettability and Derjaguin-Muller-Toporov (DMT) elastic modulus of PEEK coating. The PEEK composite matrix coated Ti6Al4V specimens did not cause any aggregation of erythrocytes, showing morphological normal shapes. The hemolysis rate (HR) values of the tested specimens were much less than 5% according to ISO 10993-4 standard. The values of plasma recalcification time (PRT) of the tested specimens varied with the increasing amount of ZrO₂ nanoparticles. Based on the results obtained, 10 wt % ZrO₂ particle reinforced PEEK coating has demonstrated an optimum blood compatibility, and can be considered as a candidate to improve the performance of existing PEEK based coatings on titanium substrates.

Protein expression during early stages of bone regeneration under hydrophobic and hydrophilic titanium domes. A pilot study

BACKGROUND AND OBJECTIVES

There is significant evidence that, during the early stages of osseointegration, moderately rough hydrophilic (SLActive) surfaces can accelerate osteogenesis and increase bone-to-implant contact in comparison to hydrophobic (SLA) surfaces. However, very little is known regarding the molecular mechanisms behind the influence that surface chemistry modifications to increase hydrophilicity determine on bone healing. The aim of this study was to describe for the first time the proteins and related signalling pathways expressed during early osseous healing stages under SLA and SLActive titanium domes for guided bone regeneration.

MATERIAL AND METHODS

One SLA and 1 SLActive dome with an internal diameter of 5.0 mm and a height of 3.0 mm were secured to the parietal bones of nine 6-month-old male New Zealand rabbits. Three animals were randomly euthanized at 4, 7 and 14 days and the newly formed tissues retrieved under the domes were analysed with liquid chromatography-mass spectrometry/mass spectrometry. STRING and KEGG databases were applied for Gene Ontology and pathway analyses.

RESULTS

A different modulation of several pathways was detected between the 2 groups at all healing times. The main differences in the osseous healing response associated to the 2 surfaces were related to pathways involved in regulating the inflammatory response, differentiation of osteoblast precursors and skeletogenesis. At day 7, the highest number of proteins and the highest cellular activity were observed in both groups, although a more complex and articulated proteome in terms of cellular metabolism and signal transduction was observed in SLActive samples.

CONCLUSION

This is the first study describing the proteome expressed during early healing stages of guided bone regeneration and osseointegration. A combination of enhanced early osteogenic response and reduced inflammatory response were suggested for the hydrophilic group. Future studies are needed to corroborate these findings and explore the molecular effects of different titanium surfaces on the cascade of events taking place during bone formation.

The effect of ventricular assist device-associated biomaterials on human blood leukocytes

Ventricular assist devices (VADs) are an effective bridging or destination therapy for patients with advanced stage heart failure. These devices remain susceptible to adverse events including infection, bleeding, and thrombus; events linked to the foreign body response. Therefore, the biocompatibility of all biomaterials used is crucial to the success of medical devices. Biomaterials common in VADs-DLC: diamond-like carbon coated stainless steel; Sap: single-crystal sapphire; SiN: silicon nitride; Ti: titanium alloy; and ZTA: zirconia-toughened alumina-were tested for their biocompatibility through incubation with whole human blood for 2 h with mild agitation. Blood was then removed and used for: complete cell counts; leukocyte activation and death, and the production of key inflammatory cytokines. All were compared to time 0 and an un-exposed 2 h sample. Monocyte numbers were lower after exposure to DLC, SiN, and ZTA and monocytes showed evidence of activation with DLC, Sap, and SiN. Neutrophils and lymphocytes were unaffected. This approach allows comprehensive analysis of the potential blood damaging effects of biomaterials. Monocyte activation by DLC, Sap, ZTA, and SiN warrants further investigation linking effects on this cell type to unfavorable inflammatory/thrombogenic responses to VADs and other blood handling devices. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1730-1738, 2018.

Temporal sequence of hard and soft tissue healing around titanium dental implants

The objective of the present review was to summarize the evidence available on the temporal sequence of hard and soft tissue healing around titanium dental implants in animal models and in humans. A search was undertaken to find animal and human studies reporting on the temporal dynamics of hard and soft tissue integration of titanium dental implants. Moreover, the influence of implant surface roughness and chemistry on the molecular mechanisms associated with osseointegration was also investigated. The findings indicated that the integration of titanium dental implants into hard and soft tissue represents the result of a complex cascade of biological events initiated by the surgical intervention. Implant placement into alveolar bone induces a cascade of healing events starting with clot formation and continuing with the maturation of bone in contact with the implant surface. From a genetic point of view, osseointegration is associated with a decrease in inflammation and an increase in osteogenesis-, angiogenesis- and neurogenesis-associated gene expression during the early stages of wound healing. The attachment and maturation of the soft tissue complex (i.e. epithelium and connective tissue) to implants becomes established 6-8 weeks following surgery. Based on the findings of the present review it can be concluded that improved understanding of the mechanisms associated with osseointegration will provide leads and targets for strategies aimed at enhancing the clinical performance of titanium dental implants.

Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling and alkali-hydrothermal treatment

The surface topography and wettability are important factors that determine the biocompatibility of biomaterials. In this article, the hierarchical micro/nano-topography of titanium alloy surface was fabricated by micro-milling and alkali-hydrothermal reaction. The surface topography and chemical composition of treated surfaces were characterized using laser scanning microscope and scanning electron microscope. The contact angles of surfaces with different micro/nano-topographies were measured by contact angle tester. MC3T3s morphology and osteocalcin productions were characterized to investigate the influence of surface modification on implants’ biocompatibility. The results show that hydrophilicity of micro-structured surface decreased compared to the untextured surface and contact angle values decreased with the increase in micro-groove spacing in small increments. In addition, the surfaces treated with alkali-hydrothermal reaction displayed strong hydrophilicity and the surface energy increased by 40 nJ/cm2 approximately. In vitro tests indicated that micro/nano-structured surface improved the adhesion, spreading, and differentiation of MC3T3s.

Complement-coagulation crosstalk on cellular and artificial surfaces

The humoral serine proteases of the complement system and the coagulation system play central roles during the events of an inflammatory response. While the complement system confers immunoprotective and -regulatory functions, the coagulation cascade is responsible to ensure hemostatic maintenance. Although these two systems individually unfold during inflammation, several studies have reported on the "crosstalk" between components of the complement and the coagulation system in the fluid phase. However, both cascades are usually initiated on or in close proximity to foreign or activated surfaces, and there is increasing evidence for interacting complement and coagulation proteins on various superficial areas on endothelium, circulating entities like platelets, leukocytes, microparticles and pathogens, and even on artificial surfaces. This review aims at summarizing these interactions to complete the picture.

Mineralization at Titanium Surfaces is a Two-Step Process

Mapping the initial reaction of implants with blood or cell culture medium is important for the understanding of the healing process in bone. In the present study, the formation of low crystalline carbonated hydroxyapatite (CHA) onto commercially pure titanium (Ti) implants from cell culture medium and blood, is described as an early event in bone healing at implants. The Ti-implants were incubated with cell culture medium (DMEM) or whole blood and the surface concentration of Ca, P and HA was analyzed by XPS, EDX and Tof-SIMS. After incubation with DMEM for 16 h and 72 h, EDX and XPS analysis showed stable levels of Ca and P on the Ti-surface. ESEM images showed an even distribution of Ca and P. Further analysis of the XPS results indicated that CHA was formed at the implants. Analysis with ToF-SIMS yielded high m.w. fragments of HA, such as Ca₂PO4 at m/z 174.9 and Ca₃PO₅ at m/z 230.8, as secondary ions at the Ti-surfaces. Analysis of implants incubated in blood for 16 h, with ToF-SIMS, showed initial formation of CHA yielding CaOH as secondary ion. The results indicate that early mineralization at Ti-surfaces is an important step in the healing of implants into bone.

Enhancement of surface wettability via the modification of microtextured titanium implant surfaces with polyelectrolytes

Micrometer- and submicrometer-scale surface roughness enhances osteoblast differentiation on titanium (Ti) substrates and increases bone-to-implant contact in vivo. However, the low surface wettability induced by surface roughness can retard initial interactions with the physiological environment. We examined chemical modifications of Ti surfaces [pretreated (PT), R(a) ≤ 0.3 μm; sand blasted/acid etched (SLA), R(a) ≥ 3.0 μm] in order to modify surface hydrophilicity. We designed coating layers of polyelectrolytes that did not alter the surface microstructure but increased surface ionic character, including chitosan (CHI), poly(L-glutamic acid) (PGA), and poly(L-lysine) (PLL). Ti disks were cleaned and sterilized. Surface chemical composition, roughness, wettability, and morphology of surfaces before and after polyelectrolyte coating were examined by X-ray photoelectron spectroscopy (XPS), contact mode profilometry, contact angle measurement, and scanning electron microscopy (SEM). High-resolution XPS spectra data validated the formation of polyelectrolyte layers on top of the Ti surface. The surface coverage of the polyelectrolyte adsorbed on Ti surfaces was evaluated with the pertinent SEM images and XPS peak intensity as a function of polyelectrolyte adsorption time on the Ti surface. PLL was coated in a uniform thin layer on the PT surface. CHI and PGA were coated evenly on PT, albeit in an incomplete monolayer. CHI, PGA, and PLL were coated on the SLA surface with complete coverage. The selected polyelectrolytes enhanced surface wettability without modifying surface roughness. These chemically modified surfaces on implant devices can contribute to the enhancement of osteoblast differentiation.

Analysis of osteoblastic gene expression in the early human mesenchymal cell response to a chemically modified implant surface: an in vitro study

OBJECTIVES

The effect of a chemical modification of the SLA surface (SLActive surface) on human bone marrow-derived mesenchymal cells (hMSCs) on; (1) adhesion, (2) proliferation and (3) early transcriptional control of osteogenic differentiation was investigated. We are based on the hypothesis that expression patterns of genes responsible for osteogenesis might be dependent on the characteristics of the implant surface.

MATERIAL AND METHODS

hMSCs were allowed to grow on smooth (SMO-control), SLA and SLActive implant surfaces (chemically modified). Cell attachment and proliferation were assessed at 3 and 24 h using a MTT dye reduction assay. At 24 h of culture, DNA microarray analysis examined alterations in early gene expression using a human osteogenesis gene array, including 109 cDNAs in quadruplicates of major regulatory genes for osteogenesis.

RESULTS

Initial attachment and proliferation were found to be significantly reduced. Nineteen genes were significantly upregulated when hMSCs were cultured on the SLA surfaces and 27 genes were significantly upregulated when hMSCs were cultured on the SLActive surfaces. Upregulated genes control cell differentiation, signal transduction, cell cycle regulation, angiogenesis, cell adhesion and extracellular matrix and bone formation.

DISCUSSION

Chemical modification decreases further cell attachment and proliferation and upregulates early osteoblastic differentiation genes. Hence, a microenvironment is created around chemically modified implants that may enhance osseointegration.

Polymer Brushes Containing Sulfonated Sugar Repeat Units: Synthesis, Characterization and In Vitro Testing of Blood Coagulation Activation

A new polymer brush chemistry containing sulfonated carbohydrate repeat units has been synthesized from silicon substrates using ATRP methods and characterized both in bulk and using surface analysis. The polymer brush was designed to act as a mimic for the naturally occurring sulfonated glycosaminoglycan, heparin, commonly used for modifying blood-contacting surfaces both in vitro and in vivo. Surface analysis showed conversion of brush saccharide precursor chemistry to the desired sulfonated polymer product. The sulfonated polymer brush surface was further analyzed using three conventional in vitro tests for blood compatibility -- plasma recalcification times, complement activation, and thrombin generation. The sulfonated polymer brush films on silicon oxide wafers exhibited better assay performance in these blood component assays than the unsulfonated sugar functionalized polymer brush in all tests performed.

Adsorption of matrix metalloproteinases onto biomedical polymers: a new aspect in biological acceptance

Matrix metalloproteinases (MMPs) are zinc-dependent enzymes involved in the remodelling of connective tissues during the development and wound healing. Moreover, two MMPs, Gelatinase A (MMP-2) and Gelatinase B (MMP-9), are also present in body fluids such as blood and urine and, therefore, they can be in contact with implanted biomaterials and can be adsorbed onto their surface. In order to test this hypothesis disks of different polymers (polystyrene (PS), polyvinyl chloride (PVC), poly(D,L-lactide) (PLA), polymethyl methacrylate (PMMA) and poly(2-hydroxyethyl methacrylate) (PHEMA)) have been exposed to human plasma and adsorbed proteins have been eluted and analyzed. Using Western blot and substrate zymography analysis, we observed that both MMP-2 and MMP-9 adsorbed onto the surfaces of all the polymers, especially hydrophilic ones (PMMA and PHEMA) and PLA, in both the active and inactive forms. Furthermore, we observed that adhesion of human granulocyte neutophils to PMMA, the polymer that adsorbed the higher quantity of MMP-2 and MMP-9 compared to the others, was reduced by more that 50% by the presence of a gelatinase inhibitor. This data suggest a surprising role of these absorbed enzymes in the adhesion of neutrophil onto some polymeric biomaterials surface and, therefore, in the setting of inflammation.

Short term evaluation of material blood compatibility using a microchannel array

New short-term evaluation of material blood compatibility was attempted using a microchannel array with human blood under a flow condition. The microchannel array chips were made of silicon, having 8,736 microchannels of 10 microm-wide, 30 microm-long, and 4.5 microm-deep on the average, as the models of capillary blood vessels. Titanium, chromium, albumin and collagen were coated onto the chips to examine the difference of material blood compatibility and the effect of protein adsorption on it. The time for the first 100 microl portion of whole blood to pass through the channels (blood pass-through time, BPT) was measured under a pressure difference of 20 cmH2O. Simultaneously, the flow behavior of blood cells was observed by an optical microscope. The BPT tends to correlate well with the level of platelet adhesion. The highest BPT as well as platelet adhesion was observed on collagen, followed by titanium, chromium, silicon, and albumin. These results indicate that the BPT can detect the different levels of platelet adhesion and thrombus formation on microchannel surface and that the protein adsorption onto chip surface can influence BPT. We concluded that this method could be applied to evaluate initial blood compatibility of materials within several minutes in vitro.

Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid-etched titanium surface

The functional capacity of osseointegrated dental implants to bear load is largely dependent on the quality of the interface between the bone and implant. Sandblasted and acid-etched (SLA) surfaces have been previously shown to enhance bone apposition. In this study, the SLA has been compared with a chemically modified SLA (modSLA) surface. The increased wettability of the modSLA surface in a protein solution was verified by dynamic contact angle analysis. Using a well-established animal model with a split-mouth experimental design, implant removal torque testing was performed to determine the biomechanical properties of the bone-implant interface. All implants had an identical cylindrical shape with a standard thread configuration. Removal torque testing was performed after 2, 4, and 8 weeks of bone healing (n = 9 animals per healing period, three implants per surface type per animal) to evaluate the interfacial shear strength of each surface type. Results showed that the modSLA surface was more effective in enhancing the interfacial shear strength of implants in comparison with the conventional SLA surface during early stages of bone healing. Removal torque values of the modSLA-surfaced implants were 8-21% higher than those of the SLA implants (p = 0.003). The mean removal torque values for the modSLA implants were 1.485 N m at 2 weeks, 1.709 N m at 4 weeks, and 1.345 N m at 8 weeks; and correspondingly, 1.231 N m, 1.585 N m, and 1.143 N m for the SLA implants. The bone-implant interfacial stiffness calculated from the torque-rotation curve was on average 9-14% higher for the modSLA implants when compared with the SLA implants (p = 0.038). It can be concluded that the modSLA surface achieves a better bone anchorage during early stages of bone healing than the SLA surface; chemical modification of the standard SLA surface likely enhances bone apposition and this has a beneficial effect on the interfacial shear strength.

Enhancing surface free energy and hydrophilicity through chemical modification of microstructured titanium implant surfaces

Roughness-induced hydrophobicity, well-known from natural plant surfaces and intensively studied toward superhydrophobic surfaces, has currently been identified on microstructured titanium implant surfaces. Studies indicate that microstructuring by sandblasting and acid etching (SLA) enhances the osteogenic properties of titanium. The undesired initial hydrophobicity, however, presumably decelerates primary interactions with the aqueous biosystem. To improve the initial wettability and to retain SLA microstructure, a novel surface modification was tested. This modification differs from SLA by its preparation after acid etching, which was done under protective gas conditions following liquid instead of dry storage. We hypothesized that this modification should have increased wettability due to the prevention of contaminations that occurs during air contact. The main outcome of dynamic wettability measurements was that the novel modification shows increased surface free energy (SFE) and increased hydrophilicity with initial water contact angles of 0 degrees compared to 139.9 degrees for SLA. This hydrophilization was kept even after any drying. Reduced hydrocarbon contaminations were identified to play a possible role in altered surface thermodynamics. Such surfaces aim to retain the hydrophilicity and natural high surface energy of the Ti dioxide surface until surgical implants' insertion and are compared in this in vitro study with structural surface variants of titanium to compare roughness and chemically induced wettability.

Thrombin-free Fibrin Coating on Small Caliber Vascular Prostheses Has High Antithrombogenicity in Rabbit Model

Fibrin coatings on prosthetic vascular graft, which are conventionally produced by fibrinogen and thrombin, are expected to improve antithrombogenicity and healing characteristics. Thrombin is one of the factors of blood coagulation cascade; however, it has a possibility to play a negative role in the graft antithrombogenicity. The purpose of this study was to evaluate the performance of our new grafts, thrombin-free fibrin-coated small caliber vascular prostheses. Knitted polyester fabric vascular prostheses 2 mm in internal diameter were coated with fibrin coating with thrombin (Graft I) or without thrombin (Graft II). Both grafts were implanted in bilateral common carotid arteries of 35 Japanese white rabbits, with Graft I in one side and Graft II in the contralateral side. Graft patency, histology, thrombin activity, and platelet deposition were compared between both grafts on postoperative days (PODs) 1, 3, 7, 10, 14, 30, and 60. Both grafts were patent without thrombus or stenosis at each end point (maximal period, POD 60). Macro- and microscopic findings revealed that no obvious difference was observed between both grafts. Before graft implantation, thrombin activities in Grafts I and II were 0.711 +/- 0.086 and 0.009 +/- 0.007 optical density at 405 nm, respectively. Thrombin activity of Graft II was significantly less than that of Graft I in every period after graft implantation, and platelet deposition of Graft II was significantly less than that of Graft I until POD 30. Thrombin-free fibrin-coated vascular prostheses have superior performance of antithrombogenicity to conventional fibrin-coated vascular prostheses with thrombin.