Performance test of a 6-stage continuous reactor for palm methyl ester production

Laboratory-Scale Research of Non-Catalyzed Supercritical Alcohol Process for Continuous Biodiesel Production

This work investigates the non-catalyzed supercritical methanol (SCM) process for continuous biodiesel production. The lab-scale setup was designed and used for biodiesel production in the temperature range of 520–650 K and 83–380 bar with an oil-to-methanol molar ratio ranging from 1:5 to 1:45. The experiments were performed in the coiled plug flow tubular reactor. The volumetric flow rate of the methanol/oil ranged from 0.1–10 mL/min. This work examines a new reactor technology involving preheating and pre-mixing of the methanol/oil mixture to reduce setup cost and increase biodiesel yield under the same reaction conditions. Work performed showed that FAME’s yield increased rapidly with temperature and pressure above the methanol critical points (i.e., 513 K and 79.5 bar). The best methyl-ester yield using this reaction technology was 91% at 590 K temperature and 351 bars with an oil-to-methanol ratio of 39 and a 15-min residence time. Furthermore, the kinetics of the free catalyst transesterification process was studied in supercritical methanol under different reaction conditions.

Process enhancement of supercritical methanol biodiesel production by packing beds

Continuous fixed bed reactors filled by three kinds of packing which were glass bead, glass spring and Dixon rings were investigated. The effect of temperature, pressure, the molar ratio of methanol to oil, flow rate, the size and shape of the packing were researched. The highest yield 90.84% of FAME was obtained by filling Dixon rings as packing with the condition of the temperature was 350°C, the pressure was 22MPa, the molar ratio of methanol to oil was 42:1. In addition, the reusability of Dixon rings was perfect. Numerical simulation was researched to provide theoretical basis for experimental results, besides the kinetics and thermodynamics behavior were investigated to explore the reaction mechanism.

Selection of lipase producing yeasts for methanol-tolerant biocatalyst as whole cell application for palm-oil transesterification

Methanol-tolerant lipase producing yeast was successfully isolated and selected thorough ecological screening using palm oil-rhodamine B agar as one step-approach. All 49 lipase-producing yeasts exhibited the ability to catalyze esterification reaction of oleic acid and methanol at 3 molar equivalents. However, only 16 isolates catalyzed transesterification reaction of refined palm oil and methanol. Rhodotorula mucilagenosa P11I89 isolated from oil contaminated soil showed the strongest hydrolytic lipase activity of 1.2U/ml against palm oil. The production of oleic methyl ester and fatty acid methyl ester (FAME) of 64.123 and 51.260% was obtained from esterification and transesterification reaction catalyzed by whole cell of R. mucilagenosa P11I89 in the presence of methanol at 3 molar equivalents against the substrates, respectively. FAME content increased dramatically to 83.29% when 6 molar equivalents of methanol were added. Application of the methanol-tolerant-lipase producing yeast as a whole cell biocatalyst was effectively resolved major technical obstacles in term of enzyme stability and high cost of lipase, leading to the feasibility of green biodiesel industrialization.

Continuous biodiesel production in a cascade of flow ideally stirred reactors

The continuous methanolysis of rapeseed oil catalyzed by KOH in a cascade of 4 flow stirred reactors at a steady state of 60 degrees C was studied. By comparing of the determined steady state concentrations of rapeseed oil, biodiesel and KOH in the reactors (under various initial concentrations of these components and feeding) with the assumed kinetic model the rate constants of the relevant differential rate equations for rapeseed oil consumption and biodiesel production were calculated.

Catalytic processes towards the production of biofuels in a palm oil and oil palm biomass-based biorefinery

In Malaysia, there has been interest in the utilization of palm oil and oil palm biomass for the production of environmental friendly biofuels. A biorefinery based on palm oil and oil palm biomass for the production of biofuels has been proposed. The catalytic technology plays major role in the different processing stages in a biorefinery for the production of liquid as well as gaseous biofuels. There are number of challenges to find suitable catalytic technology to be used in a typical biorefinery. These challenges include (1) economic barriers, (2) catalysts that facilitate highly selective conversion of substrate to desired products and (3) the issues related to design, operation and control of catalytic reactor. Therefore, the catalytic technology is one of the critical factors that control the successful operation of biorefinery. There are number of catalytic processes in a biorefinery which convert the renewable feedstocks into the desired biofuels. These include biodiesel production from palm oil, catalytic cracking of palm oil for the production of biofuels, the production of hydrogen as well as syngas from biomass gasification, Fischer-Tropsch synthesis (FTS) for the conversion of syngas into liquid fuels and upgrading of liquid/gas fuels obtained from liquefaction/pyrolysis of biomass. The selection of catalysts for these processes is essential in determining the product distribution (olefins, paraffins and oxygenated products). The integration of catalytic technology with compatible separation processes is a key challenge for biorefinery operation from the economic point of view. This paper focuses on different types of catalysts and their role in the catalytic processes for the production of biofuels in a typical palm oil and oil palm biomass-based biorefinery.