Responsive behavior of regenerated cellulose in hydrolysis under microwave radiation

Risedronate-loaded aerogel scaffolds for bone regeneration

Sugarcane bagasse-derived nanofibrillated cellulose (NFC), a type of cellulose with a fibrous structure, is potentially used in the pharmaceutical field. Regeneration of this cellulose using a green process offers a more accessible and less ordered cellulose II structure (amorphous cellulose; AmC). Furthermore, the preparation of cross-linked cellulose (NFC/AmC) provides a dual advantage by building a structural block that could exhibit distinct mechanical properties. 3D aerogel scaffolds loaded with risedronate were prepared in our study using NFC or cross-linked cellulose (NFC/AmC), then combined with different concentrations of chitosan. Results proved that the aerogel scaffolds composed of NFC and chitosan had significantly improved the mechanical properties and retarded drug release compared to all other fabricated aerogel scaffolds. The aerogel scaffolds containing the highest concentration of chitosan (SC-T3) attained the highest compressive strength and mean release time values (415 ± 41.80 kPa and 2.61 ± 0.23 h, respectively). Scanning electron microscope images proved the uniform highly porous microstructure of SC-T3 with interconnectedness. All the tested medicated as well as unmedicated aerogel scaffolds had the ability to regenerate bone as assessed using the MG-63 cell line, with the former attaining a higher effect than the latter. However, SC-T3 aerogel scaffolds possessed a lower regenerative effect than those composed of NFC only. This study highlights the promising approach of the use of biopolymers derived from agro-wastes for tissue engineering.

Electrofluid enhanced hydrolysis of maize starch and its impacts on physical properties

To achieve high-output, successional, and efficient hydrolysis of carbohydrate polymers is an increasing concern in the food and chemical industries.

The removal of heavy metal ions from aqueous solutions by amine functionalized cellulose pretreated with microwave-H2O2

Microcrystalline cellulose pretreated with microwave-H₂O₂ was introduced with carboxyl and amino groups to obtain a new promising bioadsorbent.

Pretreatment by NaOH swelling and then HCl regeneration to enhance the acid hydrolysis of cellulose to glucose

A simple pretreatment method, NaOH swelling at a low temperature and then HCl regeneration, was developed for depolymerization of cellulose to glucose. Cellulose was transformed into amorphous hydrogel during the treatment; and due to the easy diffusion of H(+) and Cl(-) ions into the cellulose hydrogel network as well as the strong ability of Cl(-) to disrupt the massive hydrogen bond, the hydrolysis rate was greatly enhanced. The method is effective for α-cellulose, microcrystalline cellulose, filter paper, ramie fiber and absorbent cotton. Even at a high α-cellulose concentration of 50g/L, 29.1% yield of glucose was still obtained within 10min at 160°C under microwave irradiation, where up to 16.2g/L of glucose solution was given. The influence of NaOH concentration, HCl concentration, hydrolysis temperature and time on the hydrolysis rate was investigated. The structure of cellulose hydrogel was also studied to confirm the reaction mechanism.

Efficient production of glucose by microwave-assisted acid hydrolysis of cellulose hydrogel

To improve the production of glucose from cellulose, a simple and effective route was developed. This process uses a combination of a step of cellulose dissolution in aqueous NaOH/urea solution and then regeneration with water, followed by an acid hydrolysis step under microwave irradiation. The method is effective to obtain glucose from α-cellulose, microcrystalline cellulose, filter paper, ramie fiber and absorbent cotton. Increased with the acid concentration the glucose yield from hydrogel hydrolysis increased from 0.42% to 44.6% at 160 °C for 10 min. Moreover, the ozone treatment of cellulose in NaOH/urea solution before regeneration significantly enhanced the hydrolysis efficiency with a glucose yield of 59.1%. It is believed that the chains in cellulose hydrogel are relatively free approached, making that the acids easily access the β-glycosidic bonds.

Hydrolysis behavior of regenerated celluloses with different degree of polymerization under microwave radiation

This work studied the hydrolysis behavior of regenerated celluloses (RCs) with different degree of polymerization (DP) by using the catalyst of dilute acid under microwave radiation. Results showed that the DP had a considerable influence on hydrolysis of cellulose. The reactivity of RCs was significantly improved when DP was lower than 51. The highest sugar yield of 59.2% was achieved from RC with lowest DP of 23 at 160 °C for 15 min. But the lowest yield of 32.6% was obtained when RC with highest DP of 132 was used. Recrystallization of cellulose was found to hinder the further hydrolysis particularly with the high DP. The effect of recrystallization can be reduced by the decrease of DP of RCs. This research demonstrates that the DP of RCs plays a crucial role on hydrolysis and it provides a preliminary guide based on DP to find a suitable pretreatment method for cellulose hydrolysis.