Pentoses and light intensity increase the growth and carbohydrate production and alter the protein profile of Chlorella minutissima

Microalgae as tools for bio-circular-green economy: Zero-waste approaches for sustainable production and biorefineries of microalgal biomass

Microalgae are promising organisms that are rapidly gaining much attention due to their numerous advantages and applications, especially in biorefineries for various bioenergy and biochemicals. This review focuses on the microalgae contributions to Bio-Circular-Green (BCG) economy, in which zero-waste approaches for sustainable production and biorefineries of microalgal biomass are introduced and their possible integration is discussed. Firstly, overviews of wastewater upcycling and greenhouse gas capture by microalgae are given. Then, a variety of valuable products from microalgal biomass, e.g., pigments, vitamins, proteins/peptides, carbohydrates, lipids, polyunsaturated fatty acids, and exopolysaccharides, are summarized to emphasize their biorefinery potential. Techno-economic and environmental analyses have been used to evaluate sustainability of microalgal biomass production systems. Finally, key issues, future perspectives, and challenges for zero-waste microalgal biorefineries, e.g., cost-effective techniques and innovative integrations with other viable processes, are discussed. These strategies not only make microalgae-based industries commercially feasible and sustainable but also reduce environmental impacts.

The growth and lipid accumulation of Scenedesmus quadricauda under nitrogen starvation stress during xylose mixotrophic/heterotrophic cultivation

In order to conquer the block of high cost and low yields which limit to realize the commercialization of microalgal biodiesel, the mixotrophic and heterotrophic cultivation of Scenedesmus quadricauda FACHB-1297 fed on xylose was separately studied employing six forms of media: phosphorus sufficient, phosphorus restricted, and phosphorus starvation were combined with nitrogen sufficient and nitrogen starvation conditions. The maximum lipid content (about 41% of dry weight) was obtained on the 5th day (heterotrophic cultivation) and 8th day (mixotrophic cultivation) under the nitrogen starved and phosphorus sufficient (N0&P) conditions, which was about twofold in comparison to the final lipid content on the sufficient nitrogen condition (control). Under mixotrophic and heterotrophic modes, the highest lipid production was achieved in the N0&P trial, with the value of 274.96 mg/L and 193.77 mg/L, respectively. Xylose utilization rate of 30-96% under heterotrophic modes was apparently higher than that of 20-50% in mixotrophic modes. In contrast, phosphorus uptake rate of 100% under mixotrophic cultivation was significantly more than that of 60-90% in heterotrophic cultivation. Furthermore, under the condition of heterotrophic cultivation using xylose as a carbon source, the phosphorus had a positive impact on microalgae cell synthesis and the lipid content enhanced with the augmentation in phosphorus concentrations. We suggested that sufficient phosphorus should be supplied for obtaining higher microalgal lipid production in the lack of nitrogen under xylose heterotrophic/mixotrophic condition. This was a highly effective way to obtain efficient microalgae lipid production.

Biomass, photosynthetic activity, and biomolecule composition in Chlorella fusca (Chlorophyta) cultured in a raceway pond operated under greenhouse conditions

Raceways are widely used as microalgae culture systems due to their low cost, but they are not the best option for biomass yield. Understanding in situ photosynthetic performance can be a first step to increase their biomass productivity. This study aimed at comparing the real time photosynthetic activity in a greenhouse raceway culture (250L) with discrete measurements under laboratory conditions. We evaluated the photophysiology and biochemical composition of Chlorella fusca culture up to 120h. In situ photosynthetic activity was continuously monitored and compared to discrete ex situ measurements; biochemical compounds were measured daily. The results showed a final biomass density of 0.45gL^-1 (5 days - 120h) and an increase of the electron transport rate (ETR) up to 48h but decreased thereafter. When the relative ETR was estimated considering the absorption coefficient (a) positive correlations of this parameter with photosynthetic capacity, cell density, biomass, biocompounds and antioxidant activity were obtained, whereas no correlation was detected without considering a. In situ photosynthesis monitoring showed higher absolute maximal ETR (10 - 160 μmol m^-3s^-1) than discrete ex situ measurements. We demonstrated the importance of considering the light absorption coefficient for expressing photosynthetic capacity and showed that C. fusca can produce, in the short-term, bioactive compounds that are correlated to photosynthetic conditions.

Use of exogenous substrate in Chlorella cultivation: Strategy for biomass and polyhydroxybutyrate production

The aim of this study was to investigate the influence of exogenous carbon supplementation and nitrogen source reduction on Chlorella fusca LEB 111 growth, biomass composition, and polyhydroxybutyrate accumulation. First, assays were performed with 50 % and 25 % reduced nitrogen source concentrations (NaNO₃). In the second stage, the influence of culture supplementation with 10, 20, and 30 mg L^-1 D-xylose, associated with 50 and 25 % reductions in NaNO₃, was evaluated. The experiments conducted with a 25 % reduction in NaNO₃ and supplementation with 10 mg L^-1 D-xylose resulted in a positive effect on the biomass productivity of C. fusca LEB 111, with production as high as 354.4 mg L^-1 d^-1. The maximum concentration of PHB extracted from C. fusca LEB 111 was 3.7 % (w w^-1) and was obtained when the microalgae were cultivated with a 25 % of reduction in NaNO₃ and supplementation of D-xylose at 20 mg L^-1. Therefore, this study brings new perspectives regarding reducing the use of nutritional sources and using exogenous carbon sources in using microalgae to produce molecules of high biotechnological potential.

Bio-Converted Spirulina for Nutraceutical Chewing Candy Formulations Rich in L-Glutamic and Gamma-Aminobutyric Acids

This study aimed at evaluating changes of microalgae Spirulina during its fermentation with Lactiplantibacillus plantarum No. 122 strain, and further at incorporating Spirulina bio-converted for nutraceuticals rich in L-glutamic (L-Glu) and gamma-aminobutyric acids (GABA) into sucrose-free chewing candy (gummy) preparations. Fermented Spirulina had higher b* (yellowness) coordinates than untreated (non-fermented), and fermentation duration (24 and 48 h) had a statistically significant effect on colour coordinates. The highest contents of L-glutamic and gamma-aminobutyric acids (4062 and 228.6 mg/kg, respectively) were found in 24 and 48 h-fermented Spirulina, respectively. Fermentation increased the content of saturated fatty acids and omega-3 in Spirulina, while monounsaturated fatty acids and omega-6 were reduced. The addition of fermented Spirulina (FSp) significantly affected hardness, decreased lightness and yellowness, and increased the greenness of chewing candies. All chewing candy samples (with xylitol) prepared with 3 and 5 g of FSp and 0.2 µL of Citrus paradise essential oil received the highest scores for overall acceptability, and the highest intensity (0.052) of emotion "happy" was elicited by the sample group containing xylitol, agar, ascorbic acid, 3 g of FSp, and 0.1 µL of Mentha spicata essential oil. As an outcome of this research, one may conclude that fermented Spirulina has significant potential as an innovative ingredient in the production of healthier sucrose-free nutraceutical chewing candies.

Biosynthesis of microalgal lipids, proteins, lutein, and carbohydrates using fish farming wastewater and forest biomass under photoautotrophic and heterotrophic cultivation

Biorefineries enable the circular, sustainable, and economic use of waste resources if value-added products can be recovered from all the generated fractions at a large-scale. In the present studies the comparison and assessment for the production of value-added compounds (e.g., proteins, lutein, and lipids) by the microalga Chlorella sorokiniana grown under photoautotrophic or heterotrophic conditions was performed. Photoautotrophic cultivation generated little biomass and lipids, but abundant proteins (416.66 mg/g_CDW) and lutein (6.40 mg/g_CDW). Heterotrophic conditions using spruce hydrolysate as a carbon source favored biomass (8.71 g/L at C/N 20 and 8.28 g/L at C/N 60) and lipid synthesis (2.79 g/L at C/N 20 and 3.61 g/L at C/N 60) after 72 h of cultivation. Therefore, heterotrophic cultivation of microalgae using spruce hydrolysate instead of glucose offers a suitable biorefinery concept at large-scale for biodiesel-grade lipids production, whereas photoautotrophic bioreactors are recommended for sustainable protein and lutein biosynthesis.

Arthrospira sp. mediated bioremediation of gray water in ceramic membrane based photobioreactor: process optimization by response surface methodology

Direct discharge of raw domestic sewage enriched with nitrogenous and phosphorous compounds into the water bodies causes eutrophication and other environmental hazards with detrimental impacts on public and ecosystem health. The present study focuses on phycoremediation of gray water with Arthrospira sp. using an innovative hydrophobic ceramic membrane-based photobioreactor system integrated with CO₂ biofixation and biodiesel production, aiming for green technology development. Surfactant and oil-rich gray water collected from the domestic kitchen was used wherein, chloride, sulfate, and surfactant concentrations were statistically optimized using response surface methodology (RSM), considering maximum microalgal growth rate as a response for the design. Ideal concentrations (mg/L) of working parameters were found to be 7.91 (sulfate), 880.49 (chloride), and 144.02 (surfactant), respectively to achieve optimum growth rate of 0.43 g_dwt/L/day. Enhancement of growth rate of targeted microalgae by 150% with suitable CO₂ (19.5%) supply and illumination in the photobioreactor affirms its efficient operation. Additionally, harvested microalgal biomass obtained from the process showed a biodiesel content of around 5.33% (dry weight). The microalgal treatment enabled about 96.82, 87.5, and 99.8% reductions in BOD, COD, and TOC, respectively, indicating the potential of the process in pollutant assimilation and recycling of such wastewater along with value-added product generation.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

Strategies and advances in the pretreatment of microalgal biomass

Modification of structural components, especially the cell wall, through adequate pretreatment strategies is critical to the bioconversion efficiency of algal biomass to biorefinery products. Over the years, several physical, physicochemical, chemical and green pretreatment methods have been developed to achieve maximum productivity of desirable by-products to sustain a circular bioeconomy. The effectiveness of the pretreatment methods is however, species specific due to diversity in the innate nature of the microalgal cell wall. This review provides a comprehensive overview of the most notable and promising pretreatment strategies for several microalgae species. Methods including the application of stress, ultrasound, electromagnetic fields, pressure, heat as well as chemical solvents (ionic liquids, supercritical fluids, deep eutectic solvents etc.) have been detailed and analyzed. Enzyme and hydrolytic microorganism based green pretreatment methods have also been reviewed. Metabolic engineering of microorganisms for product specificity and lower inhibitors can be a future breakthrough in microalgal pretreatment.

Single-phase and two-phase cultivations using different light regimes to improve production of valuable substances in the anoxygenic photosynthetic bacterium Rhodopseudomonas faecalis PA2

This study aimed to improve biomass, carotenoid, bacteriochlorophyll, protein, lipid, and carbohydrate contents of Rhodopseudomonas faecalis PA2 using different light regimes. Light intensity (4000, 6000, 8000, and 10,000 lx), together with photoperiod (24:0, 16:8, 12:12, and 8:16 h light/dark), was assigned as single-phase (SP) cultivation while two-phase (TP) cultivation used two light intensities (using 4000 lx as the first phase), together with the control of phase shift (3, 6, and 9 days) and photoperiod. Biomass, carotenoid, and bacteriochlorophyll contents were maximized by SP cultivation; light at 8000 lx with light-dark cycle of 24:0 was optimal for pigments synthesis. In contrast, TP was useful to enhance storage compounds; protein, lipid, and carbohydrate productivities were significantly increased by 121.69%, 101.69%, and 92.44%, respectively, in TP when compared with SP. This indicates that the novel light strategy proposed in this study was able to manipulate the production of valuable substances in this strain.

Microalgae starch: A promising raw material for the bioethanol production

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO₂ from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Application of Static Magnetic Fields on the Mixotrophic Culture of Chlorella minutissima for Carbohydrate Production

Magnetic field (MF) can interact with the metabolism of microalgae and has an effect (positive or negative) on the synthesis of molecules. In addition to MF, the use of pentose as a carbon source for cultivating microalgae is an alternative to increase carbohydrate yield. This study aimed at evaluating the MF application on the mixotrophic culture of Chlorella minutissima in order to produce carbohydrates. MF of 30 mT was generated by ferrite magnets and applied diurnally for 12 days. The addition of 5% pentose, MF application of 30 mT, and nitrogen concentration reduced (1.25 mM of KNO₃) was the best conditions to obtain higher carbohydrate concentrations. MF application of 30 mT increased biomass and carbohydrate contents in 30% and 163.1%, respectively, when compared with the assay without MF application. The carbohydrate produced can be used for bioethanol production.

Progress in the physicochemical treatment of microalgae biomass for value-added product recovery

Interest in microalgae-derived products is growing, mostly due to their unique characteristics and range of industrial applications. To obtain different products, one must employ specific pretreatments that retain the properties of the biologically active compounds extracted from microalgae biomass; thus, new extraction techniques require frequent upgrades. Due to increased interest in economically viable and ecologically friendly processes, new extraction methods that can be incorporated into microalgae biorefinery systems have become the main focus of research. Therefore, this review aims to address the potential applications, future prospects, and economic scenario of the new physicochemical treatments used in the extraction of bioactive microalgae compounds.

Production and characterization of Spirulina sp. LEB 18 cultured in reused Zarrouk's medium in a raceway-type bioreactor

The objective was to evaluate the effect of reusing Zarrouk's medium on a Spirulina sp. LEB 18 culture by determining kinetic parameters, chemical composition, biofuels, and thermal characterization. Cultivation was performed in a raceway bioreactor for 7 days, the supernatant was reused for four cycles. Culturing the microalga in the reused medium resulted in a cellular yield of 2.30 g L^-1 (control) and 2.04, 1.89, 1.73, and 1.15 g L^-1 for four cycles with no influence on cell growth and productivity. Biomass with high contents of carbohydrates (58.00%, 3rd cycle), phycocyanin (2.47 mg mL^-1, 1st cycle), and saturated fatty acids (60.13%, 4th cycle) were obtained with an increase in the profiles of C16:0 (45.85%) and C18:2n6 (47.40%) in the 1st cycle. The reuse of Zarrouk's medium allowed obtaining biomass with reduced cost and differentiated characteristics, allowing the exploration of commercially important biomolecules by the completion of up to four cycles.

Potential of Chlorella fusca LEB 111 cultivated with thermoelectric fly ashes, carbon dioxide and reduced supply of nitrogen to produce macromolecules

Fly ashes present several minerals that along with carbon dioxide (CO₂) represent a promising nutrient source and an alternative to reduce environmental problems. Thus, the objective of this study was to investigate if CO₂, thermoelectric fly ashes and reduction in nitrogen supply alters the production of macromolecules in Chlorella fusca LEB 111. For this purpose, 1.5 or 0.75 g L^-1 of NaNO₃, injection of 10% (v v^-1) of CO₂ as well as 0, 40 and 120 ppm of fly ashes were studied. The protein content was not impaired in cultivations with 0.75 g L^-1 of NaNO₃ since nitrogen was not fully consumed. Nevertheless, this cultivation strategy increased carbohydrate content by up to 25%, which could be fermented to produce bioethanol. Therefore, Chlorella fusca presented not only potential for CO₂ biofixation and assimilation of nutrients from fly ashes but also for enhancement of carbohydrates accumulation when the nitrogen supply was reduced.

Microalgae as source of polyhydroxyalkanoates (PHAs) - A review

Polyhydroxyalkanoates (PHA) are biopolymers synthesized by different microorganisms and considered substitute powers for petroleum-based plastics because they have similar mechanical properties as synthetic polymers, can be processed in a similar way and are fully biodegradable. Currently commercial PHAs are produced in fermenters using bacteria and large amounts of organic carbon sources and salts in the culture media, accounting for approximately 50% of the total production costs. A greater commercial application of the PHA is limited to a decrease in the cost of production. Several studies suggest that microalgae are a type of microorganisms that can be used to obtain PHAs at a lower cost because they have minimum nutrient requirements for growth and are photoautotrophic in nature, i.e. they use light and CO₂ as their main sources of energy. Thus, this work aims to provide a review on the production of PHAs of different microalgae, focusing on the properties and composition of biopolymers, verifying the potential of using these bioplastics instead of petroleum based plastics. Studies of stimulation PHA synthesis by microalgae are still considered incipient. Still, it is clear that microalgae have the potential to produce biopolymers with lower cost and can play a vital role in the environment.

Cultivation of different microalgae with pentose as carbon source and the effects on the carbohydrate content

In the search for alternative carbon sources for microalgae cultivation, pentoses can be considered interesting alternatives since the most abundant global source of renewable biomass is lignocellulosic waste, which contains significant quantities of pentoses. However, the use of pentoses (C5) in the cultivation of microalgae is still not widely studied and only recently the first metabolic pathway for pentose absorption in microalgae was proposed. So, the objective of this work was to evaluate if the use of pentoses affects the growth and carbohydrates content of Chlorella minutissima, Chlorella vulgaris, Chlorella homosphaera and Dunaliella salina. The kinetic parameters, carbohydrate and protein content and the theoretical potential for ethanol production were estimated for all strains. The highest cellular concentrations (1.25 g L^-1) were obtained for D. salina with 5% of pentoses. The addition of pentoses leads to high levels of carbohydrates for C. minutissima (58.6%) cultured with 5% of pentoses, and from this biomass, it is possible to determine a theoretical production of ethanol of 38 mL per 100 g of biomass. The pentoses affect the growth and the biomass composition of the studied strains, generating biomass with potential use for bioethanol production.

Potential of microalgae as biopesticides to contribute to sustainable agriculture and environmental development

The loss of yields from agricultural production due to the presence of pests has been treated over the years with synthetic pesticides, but the use of these substances negatively affects the environment and presents health risks for consumers and animals. The development of agroecological systems using biopesticides represents a safe alternative that contributes to the reduction of agrochemical use and sustainable agriculture. Microalgae are able to biosynthesize a number of metabolites with potential biopesticidal action and can be considered potential biological agents for the control of harmful organisms to soils and plants. The present work aims to provide a critical perspective on the consequences of using synthetic pesticides, offering as an alternative the biopesticides obtained from microalgal biomass, which can be used together with the implementation of environmentally friendly agricultural systems.

CO2 fixation and production of biodiesel by Chlorella vulgaris NIOCCV under mixotrophic cultivation

In this study, Chlorella vulgaris NIOCCV was cultivated in seafood processing industry wastewater with continuous supply of 5%, 10%, and 20% CO₂. The optimum CO₂ fixation efficiency ( [Formula: see text] ), biomass productivity, specific growth rate (SGR), and lipid content recorded were 0.43 mg L^-1 d^-1, 264.58 ± 8.8 mg L^-1 d^-1, 0.46 d^-1, and 38 ± 2.6% on dry weight basis, respectively at CO₂ supply of 10%. The fatty acid methyl ester-derived biodiesel properties determined at same condition were in compliance with national and international fuel standards. The higher calorific value (HHV) of the resultant biomass was 11.14, 16.41 and 12.83 MJ Kg^-1 for CO₂ enrichment of 5%, 10%, and 20%, respectively. The synergistic environmental benefit of nutrients removal from wastewater is shown as an additional advantage of microalgal cultivation. Thus, integration of algae-based CO₂ fixation with wastewater treatment and biodiesel production may realize microalgal CO₂ capture technology as environmentally sustainable and economically more attractive.

Cultivation strategy to stimulate high carbohydrate content in Spirulina biomass

This study focused on verifying if production of Spirulina biomass with high carbohydrate content is stimulated by reduced supply of nitrogen associated to addition of NaHCO₃ or CO₂ at different flow rates and times of injection. For this purpose, addition of 0.25 g L^-1 of NaNO₃ allowed Spirulina to accumulate up to 49.3% (w w^-1) of carbohydrates with the highest amount of CO₂ (0.3 vvm injected for 5 min). This value reached 59.1% (w w^-1) when NaHCO₃ was the carbon source. Meanwhile, biomass concentration achieved 0.81 and 0.97 g L^-1, respectively. In contrast, protein content was inversely proportional to carbohydrate accumulation in the experiments. Thus, this study represents an important step to define cultivation conditions to enhance carbohydrate content in Spirulina. The carbohydrate-rich biomass could be further fermented to produce bioethanol.

Innovative polyhydroxybutyrate production by Chlorella fusca grown with pentoses

The current study aimed to evaluate if the addition of pentoses along with variations in light intensity and photoperiod can stimulate the production of polyhydroxybutyrate (PHB) and other biomolecules by Chlorella fusca LEB 111. The variables evaluated were the addition of xylose and arabinose as sources of organic carbon, different photoperiods (18 h, 12 h and 6 h light) and variations in light intensities (58, 28 and 9 μmol_photons m^-2 s^-1). The highest PHB accumulation (17.4% w w^-1) and protein production (53.2% ww^-1) were observed in assays with xylose addition and a photoperiod of 6 h of light provided at 28 and 58 μmol_photons m^-2 s^-1, respectively. The highest lipid content (24.7% w w^-1) was obtained with 18 h of light. The current study contributes to the development of sustainable alternatives for the use of wastes and the production of biomolecules from algae.

The growth and lipid accumulation of Scenedesmus quadricauda during batch mixotrophic/heterotrophic cultivation using xylose as a carbon source

To overcome the bottlenecks of high cost and low production yields that restrict the commercial production of microalgae biodiesel, the use of xylose was evaluate by Scenedesmus quadricauda FACHB-1297, which was shown to be capable of mixotrophic and heterotrophic growth and lipid production on xylose, rich in the waste streams from pulp and paper industry, with increases in lipid productivities of 35.8-fold (mixotrophic) and 9.2-fold (heterotrophic) in comparison to photoautotrophic lipid yields. Five doses of xylose were tested to determine the effects and mechanisms of the carbon source on microalgae in mixotrophic mode. At the optimal xylose dosage of 4 g/L, the highest lipid content (38.61%) and productivity (139.55 mg/L/d) were achieved besides maximum biomass productivity (361.4 mg/L/d), nutrient removal efficiency of 68.4% (nitrogen), 97.2% (phosphorus) and 35.2% (xylose). Those indicated that S. quadricauda FACHB-1297 was suitable for further development of using xylose from certain waste streams for biofuel production.

Chlorella minutissima cultivation with CO2 and pentoses: Effects on kinetic and nutritional parameters

CO₂ emissions and the large quantity of lignocellulosic waste generated by industrialized nations constitute problems that may affect human health as well as the global economy. The objective of this work was to evaluate the effects of using CO₂ and pentoses on the growth, protein profile, carbohydrate content and potential ethanol production by fermentation of Chlorella minutissima biomass. CO₂ and pentose supplementation can induce changes in the microalgal protein profile. A biomass production of 1.84g.L^-1 and a CO₂ biofixation rate of 274.63mg.L^-1.d^-1 were obtained with the use of 20% (v.v^-1) CO₂. For cultures with 20% (v.v^-1) CO₂ and reduced nitrogen, the carbohydrate content was 52.3% (w.w^-1), and theoretically, 33.9mL.100g^-1 of ethanol can be produced. These results demonstrate that C. minutissima cultured with the combined use of CO₂ and pentoses generates a biomass with high bioenergetic potential.