Low liquid ammonia treatment of wheat straw increased enzymatic cell wall polysaccharide degradability and decreased residual hydroxycinnamic acids

Isolation of Pure Lignin and Highly Digestible Cellulose from Defatted and Steam-Exploded Cynara cardunculus

In this work, a three-step approach to isolate the main components of lignocellulosic cardoon, lignin and cellulose, was investigated. The raw defatted biomass, Cynara cardunculus, after steam explosion was subjected to a mild organosolv treatment to extract soluble lignin (L1). Then, enzymatic hydrolysis was performed to achieve decomposition of the saccharidic portion into monosaccharides and isolate residual lignin (L2). The fractionation conditions were optimized to obtain a lignin as less degraded as possible and to maximize the yield of enzymatic hydrolysis. Furthermore, the effect of the use of aqueous ammonia as an extraction catalyst on both fractions was studied. Each fraction was characterized by advanced techniques, such as elemental analysis and ³¹P nuclear magnetic resonance (NMR), ¹³C-¹H two-dimensional (2D)-NMR, attenuated total reflectance-Fourier transform infrared (ATR-FTIR), and UV-vis spectroscopies for lignin and X-ray diffraction (XRD), Klason compositional analysis, elemental analysis, and ATR-FTIR spectroscopy for cellulose-rich fractions. The impact of the cellulose-rich fraction composition and crystallinity was also correlated to the efficiency of the hydrolysis step, performed using the enzymatic complex Cellic CTec3.

SRB-based bioelectrochemical system: A potential multipollutant combatant for enhanced landfill waste stabilization

Due to the lower proportion of organic matter and higher toxicity of the aged landfill, most of the advanced treatment technologies are not effective from economic, environmental, and social perspectives. This study evaluates the potential of sulfate-reducing bacteria (SRB) based bioelectrochemical-system (BES) in the decontamination of landfill wastes by reducing GHGs emissions and levels of soluble pollutants. The landfill waste (solid/leachate) collected from the Pirana Landfill site was assessed for economical long-term treatment and scaling up the feasibility of the designed system. The present system demonstrated significant improvement in volumetric hydrogen production of 3.1:1 (H2:CH4) by suppressing methanogenesis with a significant reduction in heavy metals concentration and other organic components. Despite being amended with 0.1 N ammonia, the treated leachate level of NO3 (2.350 ± 1.077 mg/L) was reduced by 5.3 times, hence reducing further groundwater pollution from landfill leaching. The BES-treated solid waste was more stabilized as shown by a fivefold increase in surface area and can be potentially applied for leachate immobilization and bio-fortification of agricultural fields. The vector arrangement and magnitude with differences in magnitudes for both leachate and solid waste supported the on-site applicability of BES treatment. Concerning the affinity in various treatment systems, the dendrogram clearly showed Ca and Fe placed far from each other (3506.08), in comparison to Fe and Mg (1186.6), followed by Fe and Cu (1544.6). Voltammograms proved the efficacy of the enriched electrochemically active bacteria (EAB), to support the treatment of landfill solid waste and leachate sustainably.

Advanced Bioethanol Production: From Novel Raw Materials to Integrated Biorefineries

The production of so-called advanced bioethanol offers several advantages compared to traditional bioethanol production processes in terms of sustainability criteria. This includes, for instance, the use of nonfood crops or residual biomass as raw material and a higher potential for reducing greenhouse gas emissions. The present review focuses on the recent progress related to the production of advanced bioethanol, (i) highlighting current results from using novel biomass sources such as the organic fraction of municipal solid waste and certain industrial residues (e.g., residues from the paper, food, and beverage industries); (ii) describing new developments in pretreatment technologies for the fractionation and conversion of lignocellulosic biomass, such as the bioextrusion process or the use of novel ionic liquids; (iii) listing the use of new enzyme catalysts and microbial strains during saccharification and fermentation processes. Furthermore, the most promising biorefinery approaches that will contribute to the cost-competitiveness of advanced bioethanol production processes are also discussed, focusing on innovative technologies and applications that can contribute to achieve a more sustainable and effective utilization of all biomass fractions. Special attention is given to integrated strategies such as lignocellulose-based biorefineries for the simultaneous production of bioethanol and other high added value bioproducts.

Urea-pretreated corn stover: Physicochemical characteristics, delignification kinetics, and methane production

Solids loading is a key factor in aqueous or gaseous ammonia production from urea. Methane production from urea-pretreated corn stover, as well as the physicochemical characteristics and delignification kinetics of the corn stover, were investigated with four solids loading values (10%-70%) and five ratios of urea to corn stover (1:100-7:10) at 35 °C for 6 weeks. A 1:20 ratio of urea to corn stover was optimal for achieving high lignin removal with ≤50% solids loading, and 7:10 was optimal with 70% solids loading. Under the two optimal conditions, 85.56% and 82.35% of cellulose and 85.76% and 85.49% of hemicellulose were retained. The maximum lignin removal rates of 69.67% and 68.27% and methane production of 294.70 and 292.56 L/kg volatile solids (VS) were achieved, respectively. The delignification kinetics of the urea-pretreated corn stover conformed to three first-order reactions. Most of the lignin was degraded within the first 3 weeks.

Recent advances on ammonia-based pretreatments of lignocellulosic biomass

Ammonia-based pretreatments have been extensively studied in the last decade as one of the leading pretreatment technologies for lignocellulose biorefining. Here, we discuss the key features and compare performances of several leading ammonia-based pretreatments (e.g., soaking in aqueous ammonia or SAA, ammonia recycled percolation or ARP, ammonia fiber expansion or AFEX, and extractive ammonia or EA). We provide detailed insight into the distinct physicochemical mechanisms employed during ammonia-based pretreatments and its impact on downstream bioprocesses (e.g., enzymatic saccharification); such as modification of cellulose crystallinity, lignin/hemicellulose structure, and other ultrastructural changes such as cell wall porosity. Lastly, a brief overview of process technoeconomics and environmental impacts are discussed, along with recommendations for future areas of research on ammonia-based pretreatments.