Efficacy of Cu(II) as an electron-shuttle mediator for improved bioelectricity generation and Cr(VI) reduction in microbial fuel cells

Recent advances in microbial fuel cell-based self-powered biosensors: a comprehensive exploration of sensing strategies in both anode and cathode modes

With the rapid development of society, it is of paramount importance to expeditiously assess environmental pollution and provide early warning of toxicity risks. Microbial fuel cell-based self-powered biosensors (MFC-SPBs) have emerged as a pivotal technology, obviating the necessity for external power sources and aligning with the prevailing trends toward miniaturization and simplification in biosensor development. In this case, vigorous advancements in MFC-SPBs have been acquired in past years, irrespective of whether the target identification event transpires at the anode or cathode. The present article undertakes a comprehensive review of developed MFC-SPBs, categorizing them into substrate effect and microbial activity effect based on the nature of the target identification event. Furthermore, various enhancement strategies to improve the analytical performance like accuracy and sensitivity are also outlined, along with a discussion of future research trends and application prospects of MFC-SPBs for their better developments.

Enhanced bioelectroremediation of heavy metal contaminated groundwater through advancing a self-standing cathode

Hexavalent chromium (Cr(VI)) contamination in groundwater poses a substantial global challenge due to its high toxicity and extensive industrial applications. While the bioelectroremediation of Cr(VI) has attracted huge attention for its eco-friendly attributes, its practical application remains constrained by the hydrogeochemical conditions of groundwater (mainly pH), low electron transfer efficiency, limitations in electrocatalyst synthesis and electrode fabrication. In this study, we developed and investigated the use of N, S co-doped carbon nanofibers (CNFs) integrated on a graphite felt (GF) as a self-standing cathode (NS/CNF-GF) for the comprehensive reduction of Cr(VI) from real contaminated groundwater. The binder free cathode, prepared through electro-polymerization, was employed in a dual-chamber microbial fuel cell (MFC) for the treatment of Cr (VI)-laden real groundwater (40 mg/L) with a pH of 7.4. The electrochemical characterization of the prepared cathode revealed a distinct electroactive surface area, more wettability, facilitating enhanced adsorption and rapid electron transfer, resulting in a commendable Cr(VI) reduction rate of 0.83 mg/L/h. The MFC equipped with NS/CNF-GF demonstrated the lowest charge transfer resistance (Rct) and generated the highest power density (155 ± 0.3 mW/m2) compared to control systems. The favorable electrokinetics for modified cathode led to swift substrate consumption in the anode, releasing more electrons and protons, thereby accelerating Cr(VI) reduction to achieve the highest cathodic coulombic efficiency (C.Eca)of80 ± 1.3 %. A similar temporal trend observed between Cr(VI) removal efficiency, COD removal efficiency, and C.Eca, underscores the effective performance of the modified electrode. The reusability of the binder free cathode, exemption from catholyte preparation and the absence of pH regulation requirements highlighted the potential scalability and applicability of our findings on a larger scale.

Bacteria-driven copper redox reaction coupled electron transfer from Cr(VI) to Cr(III): A new and alternate mechanism of Cr(VI) bioreduction

Cr(VI) released into the environment inevitably co-exists with other contaminants, such as heavy metal ions, thus altering the performance of bacteria for Cr(VI) reduction; however, the mechanism underlying Cr(VI)-reducing bacterial response to heavy metal ions remains elusive. Herein, we investigate the toxic effects of Cu(II) and Cr(VI) on Cr(VI)-reducing bacterium Pannonibacter phragmitetus D-6 (hereafter D-6), which changes the primary metabolic pattern of Cr(VI). At Cu(II) concentrations of 10-100 mg/L, the efficiency of Cr(VI) reduction increases significantly. The co-exposure of Cr(VI) and Cu(II) induces D-6 to preferentially respond to Cu(II) through electrostatic forces, which is then reduced to Cu(I) outside and inside the bacterial cells. The original pathways for Cr(VI) reduction are weakened via downregulating genes related to Cr(VI) transport and reduction. A new mechanism involving Cu(II)-mediated electron transfer from D-6 to Cr(VI) is elucidated. Specially, Cu(II) accumulates around the cells as an electron shuttle and promotes Cr(VI) reduction. Genes encoding cytochromes involved in electron transfer are significantly up-regulated, thus promoting Cu(II) reduction. The Cu(II)/Cu(I) redox cycle ensures the continuous bioremoval of Cr(VI) in a cycle test. This study reveals an overlooked mechanism for Cr(VI) reduction, which provides theoretical guidance for designing practical microbial process to remediate Cr(VI) contamination.

Research progress on using biological cathodes in microbial fuel cells for the treatment of wastewater containing heavy metals

Various types of electroactive microorganisms can be enriched to form biocathodes that reduce charge-transfer resistance, thereby accelerating electron transfer to heavy metal ions with high redox potentials in microbial fuel cells. Microorganisms acting as biocatalysts on a biocathode can reduce the energy required for heavy metal reduction, thereby enabling the biocathode to achieve a lower reduction onset potential. Thus, when such heavy metals replace oxygen as the electron acceptor, the valence state and morphology of the heavy metals change under the reduction effect of the biocathode, realizing the high-efficiency treatment of heavy metal wastewater. This study reviews the mechanisms, primary influencing factors (e.g., electrode material, initial concentration of heavy metals, pH, and electrode potential), and characteristics of the microbial community of biocathodes and discusses the electron distribution and competition between microbial electrodes and heavy metals (electron acceptors) in biocathodes. Biocathodes reduce the electrochemical overpotential in heavy metal reduction, permitting more electrons to be used. Our study will advance the scientific understanding of the electron transport mechanism of biocathodes and provide theoretical support for the use of biocathodes to purify heavy metal wastewater.

High efficiency electrochemical separation of uranium(VI) from uranium-containing wastewater by microbial fuel cells with different cathodes

As an emerging versatile technology for separating uranium from uranium-containing wastewater (UCW), microbial fuel cell (MFC) offers a novel approach to UCW treatment. Its cathode is essential for the treatment of UCW. To thoroughly investigate the efficacy of MFC in treating UCW, investigations were conducted using MFCs with five materials (containing iron sheet (IP), stainless steel mesh (SSM), carbon cloth (CC), carbon brush (CB), and nickel foam (NF)) as cathodes. The results revealed that each MFC system performed differently in terms of carbon source degradation, uranium removal, and electricity production. In terms of carbon source degradation, CB-MFC showed the best performance. The best uranium removal method was NF-MFC, and the best electricity production method was carbon-based cathode MFC. Five MFC systems demonstrated stable performance and consistent difference over five cycles, with CC-MFC outperforming the others. Furthermore, SEM and XPS characterization of the cathode materials before and after the experiment revealed that a significant amount of U(IV) was generated during the uranium removal process, indicating that uranium ions were primarily removed by electrochemical reduction precipitation. This study confirmed that abiotic cathode MFC had a high UCW removal potential and served as a good guideline for obtaining the best cathode for MFC.

Electroactive microorganism-assisted remediation of groundwater contamination: Advances and challenges

Groundwater contamination has become increasingly prominent, therefore, the development of efficient remediation technology is crucial for improving groundwater quality. Bioremediation is cost-effective and environmentally friendly, while coexisting pollutant stress can affect microbial processes, and the heterogeneous character of groundwater medium can induce bioavailability limitations and electron donor/acceptor imbalances. Electroactive microorganisms (EAMs) are advantageous in contaminated groundwater because of their unique bidirectional electron transfer mechanism, which allows them to use solid electrodes as electron donors/acceptors. However, the relatively low-conductivity groundwater environment is unfavorable for electron transfer, which becomes a bottleneck problem that limits the remediation efficiency of EAMs. Therefore, this study reviews the recent advances and challenges of EAMs applied in the groundwater environment with complex coexisting ions, heterogeneity, and low conductivity and proposes corresponding future directions.

Physiological and transcriptional studies reveal Cr(VI) reduction mechanisms in the exoelectrogen Cellulomonas fimi Clb-11

A facultative exoelectrogen, Cellulomonas fimi strain Clb-11, was isolated from polluted river water. This strain could generate electricity in microbial fuel cells (MFCs) with carboxymethyl cellulose (CMC) as the carbon source, and the maximum output power density was 12.17 ± 2.74 mW·m^-2. In addition, Clb-11 could secrete extracellular chromate reductase or extracellular electron mediator to reduce Cr(VI) to Cr(III). When the Cr(VI) concentration was less than 0.5 mM in Luria-Bertani (LB) medium, Cr(VI) could be completely reduced by Clb-11. However, the Clb-11 cells swelled significantly in the presence of Cr(VI). We employed transcriptome sequencing analysis to identify genes involved in different Cr(VI) stress responses in Clb-11. The results indicate that 99 genes were continuously upregulated while 78 genes were continuously downregulated as the Cr(VI) concentration increased in the growth medium. These genes were mostly associated with DNA replication and repair, biosynthesis of secondary metabolites, ABC transporters, amino sugar and nucleotide sugar metabolism, and carbon metabolism. The swelling of Clb-11 cells might have been related to the upregulation of the genes atoB, INO1, dhaM, dhal, dhak, and bccA, which encode acetyl-CoA C-acetyltransferase, myo-inositol-1-phosphate synthase, phosphoenolpyruvate-glycerone phosphotransferase, and acetyl-CoA/propionyl-CoA carboxylase, respectively. Interestingly, the genes cydA and cydB related to electron transport were continuously downregulated as the Cr(VI) concentration increased. Our results provide clues to the molecular mechanism of Cr(VI) reduction by microorganisms in MFCs systems.

Simultaneous treatment of chromium-containing wastewater and electricity generation using a plant cathode-sediment microbial fuel cell: investigation of associated mechanism and influencing factors

A novel plant cathode-sediment microbial fuel cell (P-SMFC) was constructed to treat Cr-containing wastewater, and the effects of the plants used, initial concentrations of Cr(VI) employed, and the external resistance on the treatment of wastewater and generation of electricity were investigated. The results showed that the system achieved the best performance when Acorus calamus was the cathode plant, the external resistance was 2000 Ω, and the initial Cr (VI) concentration of the overlying water of is 230 mg/L. A maximum power density of 40.16 mW/m² was reached, and Cr (VI) and COD removal efficiencies in the overlying water were 99.94% and 98.21%, respectively. The closed-circuit installation promoted the attachment of many microorganisms to the cathode, anode and sediment, increased species abundance, and reduced species diversity. The P-SMFC is inexpensive to construct, it consumes no energy, and it can generate bioelectricity; it thus has great application development value as a chromium-containing wastewater treatment method.

Tubular Sediment-Water Electrolytic Fuel Cell for Dual-Phase Hexavalent Chromium Reduction

A novel tubular sediment-water electrolytic fuel cell (SWEFC) was fabricated for the reduction of Cr(VI) in a dual-phase system. The approach simulates a standing water body with Cr(VI)-contaminated overlying water (electrolyte) and bottom sediment phase with electrodes placed in both the phases, supplemented with urea as a potential electron donor. Cr(VI) reduction efficiency of 93.2 ± 1.3% from electrolyte (in 1.5 h) and 81.2 ± 1.3% from the sediment phase (in 8 h) with an initial Cr(VI) concentration of 1,000 mg/L was observed in a single-cell configuration. The effect of initial Cr(VI) concentration, variation in sediment salinity and pH, and different electron donors on the SWEFC performance were systematically investigated. SWEFC showed enhanced performance with 2.4-fold higher current (193.9 mA) at 400 mg/L Cr(VI) concentration when cow dung was used as a low-cost alternative to urea as an electron donor. Furthermore, reactor scalability studies were carried out with nine-anode and nine-cathode configuration (3 L electrolyte and 2 kg sediment), and reduction efficiencies of 98.9 ± 0.9% (in 1 h) and 97.6 ± 2.2% (in 8 h) were observed from the electrolyte and sediment phases, respectively. The proposed sediment-water electrolytic fuel cell can be an advanced and environmentally benign strategy for Cr(VI) remediation from contaminated sediment-water interfaces along with electricity generation.

Synchronous Cr(VI) Remediation and Energy Production Using Microbial Fuel Cell from a Subsurface Environment: A Review

Applying microbial fuel cell (MFC) technology for eco-remediation of Cr(VI) pollution from a subsurface environment has great scientific value and practical significance due to its promising advantages of pollutant remediation and renewable energy generation. The aim of the current review is to summarize the migration characteristics of Cr(VI) in a subsurface soil/water environment and investigate the factors affecting the MFC performance for synchronous Cr(VI) remediation and power generation, and sequentially highlight diverse challenges of MFC technology for in situ remediation of subsurface groundwater and soils. The critical review put forward that Cr(VI) removal efficiency and energy production of MFC can be improved by enhancing the adjustability of cathode pH, setting potential, modifying electrode, and incorporating other technologies into MFC. It was recommended that designing typical large-scale, long-term continuous flow MFC systems, adding electron shuttle media or constructing artificial electron according to actual groundwater/soil and Cr(VI) pollution characteristics, site geology, and the hydrogeology condition (hydrochemical conditions, colloid type, and medium) are essential to overcome the limitations of the small size of the laboratory experiments and improve the application of technology to in situ Cr(VI) remediation. This review provided reference and ideas for future research of MFC-mediated onsite Cr(VI) remediation.

Wood carbon electrode in microbial fuel cell enhances chromium reduction and bioelectricity generation

Microbial fuel cell (MFC) is a recommended treatment to remediate hexavalent chromium (Cr(VI)) in wastewater. In this study, a wood carbon (WC) electrode was introduced in MFC to enhance the Cr(VI) removal efficiency. WC electrode in MFC completely removed Cr(VI) as compared to the carbon cloth (31.12%) and carbon felt (34.83) within 48 h of operation at 20 mg L^-1 of Cr(VI) concentration. The maximum power density of WC electrode was 62.59 mW m^-2 higher than 0.115 and 3.154 mW m^-2 of carbon cloth and felt respectively. The specific surface area of WC increased to 158.47 m^-2 g^-1 after high-temperature carbonization, and electrochemical tests indicate it has higher electrocatalytic ability. Therefore, WC might be a good electrode material to effectively remove Cr(VI) and generate bioelectricity simultaneously.

Indicators of water biotoxicity obtained from turn-off microbial electrochemical sensors

The development of biosensors is critical to reducing potential risks associated with contamination accidents. However, the application of microbial electrochemical sensors for water biotoxicity monitoring is hampered by the lack of an indicator with high response magnitudes. In this study, microbial electrochemical sensors were fabricated with interdigitated electrode arrays (IDAs), and indicators from various electrochemical analyses were comprehensively investigated. Only the peak of cyclic voltammetry (CV) was highly linearly correlated with the commonly used current indicator during the enrichment of the electroactive biofilm. The resistance fitted from the electrochemical impedance spectroscopy (EIS) data provided a comparable and even higher inhibition ratio (IR) than the current during toxicity assessments. The differential pulse voltammetry (DPV) did not exhibit a higher sensitivity than the CV peak. However, no clear response was observed in the real-time impedance analysis for use in water biotoxicity monitoring. Most of the microbes were in the propidium iodide (PI)-permeable state after the toxicity assessments, although the current was fully recovered. This study demonstrates the potential to use EIS data as indicators of water biotoxicity using microbial electrochemical sensors.

Ameliorating Cu2+ reduction in microbial fuel cell with Z-scheme BiFeO3 decorated on flower-like ZnO composite photocathode

BiFeO₃ nanoparticle decorated on flower-like ZnO (BiFeO₃/ZnO) was fabricated through a facile hydrothermal-reflux combined method. This material was utilized as a composite photocathode for the first time in microbial fuel cell (MFC) to reduce the copper ion (Cu²⁺) and power generation concomitantly. The resultant BiFeO₃/ZnO-based MFC displayed distinct photoelectrocatalytic activities when different weight percentages (wt%) BiFeO₃ were used. The 3 wt% BiFeO₃/ZnO MFC achieved the maximum power density of 1.301 W m^-2 in the catholyte contained 200 mg L^-1 of Cu²⁺ and the power density was greatly higher than those pure ZnO and pure BiFeO₃ photocathodes. Meanwhile, the MFC exhibited 90.7% removal of Cu²⁺ within 6 h under sunlight exposure at catholyte pH 4. The addition of BiFeO₃ nanoparticles not only manifested outstanding capability in harvesting visible light, but also facilitated the formation of Z-scheme BiFeO₃/ZnO heterojunction structure to induce the charge carrier transfer along with enhanced redox abilities for the cathodic reduction. The pronounced electrical output and Cu²⁺ reduction efficiencies can be realized through the synergistic cooperation between the bioanode and BiFeO₃/ZnO photocathode in the MFC. Furthermore, the developed BiFeO₃/ZnO composite presented a good stability and reusability of photoelectrocatalytic activity up to five cyclic runs.

Insight into Cr(VI) biosorption onto algal-bacterial granular sludge: Cr(VI) bioreduction and its intracellular accumulation in addition to the effects of environmental factors

Hexavalent chromium (Cr(VI)) is one of the typical heavy metals that pose a great threat to the environment. As a novel biotechnology, algal-bacterial aerobic granular sludge (AGS) possesses the merits of both bacterial AGS and algae. This study firstly evaluated Cr(VI) removal via biosorption by algal-bacterial AGS under different operation conditions and then some environmental factors. Results show that the highest Cr(VI) reduction (99.3%) and total Cr removal (89.1%) were achieved within 6 h at pH 2 and 6, respectively. The coexisting oxyanions exhibited slight effects, while both tested natural organic matters (humic acid and tannic acid) and carbon sources promoted Cr(VI) reduction at some appropriate concentrations. The coexistence of metal cations favored Cr(VI) reduction, achieving the highest enhancement of 8.1% by Cu²⁺ at 5 mg/L, while the total Cr removal was suppressed to some extent. Salinity > 5 g/L severely inhibited both Cr(VI) reduction and total Cr removal. Moreover, the loaded Cr in algal-bacterial AGS was found to be almost in the form of Cr(III), with 66.8% being contributed by intracellular accumulation. This work suggests that Cr(VI) reduction and intracellular accumulation are the main mechanisms involved in Cr(IV) biosorption onto algal-bacterial AGS.

Electrochemical reduction of Cr(VI) in water: lessons learned from fundamental studies and applications

Converting toxic Cr(vi) to benign Cr(iii) would offer a solution to decontaminate drinking water. Electrochemical methods are ideally suited to carry out this reduction without added external reductants. Achieving this transformation at low overpotentials requires mediating the transfer of protons and electrons to Cr(vi). In this review thermodynamic parameters will be discussed to understand Cr(vi) speciation in water and identify reduction pathways. The electrochemical reduction of Cr(vi) at bare electrodes is reviewed and mechanistic considerations are discussed. Works on modified electrodes are compared to identify key parameters influencing the reduction. An overview of current applications to Cr(vi) reduction is briefly discussed to link fundamental studies to applications.

Chemical-Assisted Microbially Mediated Chromium (Cr) (VI) Reduction Under the Influence of Various Electron Donors, Redox Mediators, and Other Additives: An Outlook on Enhanced Cr(VI) Removal

Chromium (Cr) (VI) is a well-known toxin to all types of biological organisms. Over the past few decades, many investigators have employed numerous bioprocesses to neutralize the toxic effects of Cr(VI). One of the main process for its treatment is bioreduction into Cr(III). Key to this process is the ability of microbial enzymes, which facilitate the transfer of electrons into the high valence state of the metal that acts as an electron acceptor. Many underlying previous efforts have stressed on the use of different external organic and inorganic substances as electron donors to promote Cr(VI) reduction process by different microorganisms. The use of various redox mediators enabled electron transport facility for extracellular Cr(VI) reduction and accelerated the reaction. Also, many chemicals have employed diverse roles to improve the Cr(VI) reduction process in different microorganisms. The application of aforementioned materials at the contaminated systems has offered a variety of influence on Cr(VI) bioremediation by altering microbial community structures and functions and redox environment. The collective insights suggest that the knowledge of appropriate implementation of suitable nutrients can strongly inspire the Cr(VI) reduction rate and efficiency. However, a comprehensive information on such substances and their roles and biochemical pathways in different microorganisms remains elusive. In this regard, our review sheds light on the contributions of various chemicals as electron donors, redox mediators, cofactors, etc., on microbial Cr(VI) reduction for enhanced treatment practices.

Microbial Cd(II) and Cr(VI) resistance mechanisms and application in bioremediation

The heavy metals cadmium (Cd) and chromium (Cr) are extensively used in industry and result in water and soil contamination. The highly toxic Cd(II) and Cr(VI) are the most common soluble forms of Cd and Cr, respectively. They enter the human body through the food chain and drinking water and then cause serious illnesses. Microorganisms can adsorb metals or transform Cd(II) and Cr(VI) into insoluble or less bioavailable forms, and such strategies are applicable in Cd and Cr bioremediation. This review focuses on the highlighting of novel achievements on microbial Cd(II) and Cr(VI) resistance mechanisms and their bioremediation applications. In addition, the knowledge gaps and research perspectives are also discussed in order to build a bridge between the theoretical breakthrough and the resolution of Cd(II) and Cr(VI) contamination problems.

Efficacy of electrode position in microbial fuel cell for simultaneous Cr(VI) reduction and bioelectricity production

Microbial fuel cells (MFCs) that are bio-energy transducers capture bioelectricity produced from the oxidation of organic matter by using the electro-active bacteria grown on the biofilm attached on anode. Previous studies explored the effect of several limiting factors, such as electrode material, catalyst type, membrane structure, and electrolyte, on the electrochemical performance of MFCs. However, the effects of electrode position on Cr(VI) reduction and bioelectricity production remain unknown. In this study, MFCs with different electrode positions (i.e., 4 cm (MFC-4), 3 cm (MFC-3), 2 cm (MFC-2), and 1 cm (MFC-1)) were designed and fabricated to evaluate the overall performance of MFCs. The results of electrochemical analysis confirmed that MFC-2 exhibited low exchange transfer resistance (4.9 Ω) and strong conductivity, resulting in optimal electrochemical performance. In addition, Cr(VI) was completely removed within 11 h in MFC-2 with a large reduction rate of 0.91 g/m³·h. and COD removal efficiency of 78.25%. The overall performance of MFC-2 was comparatively higher than those of MFC-1 (0.80 g/m³·h and 68.82%), MFC-3 (0.64 g/m³·h and 61.67%), and MFC-4 (0.52 g/m³·h and 39.85%). Meanwhile, MFC-2 generated high open voltage (1.02 V) and power density (535.4 mW/m²), which are 1.4- and 3.1-fold larger than those of MFC-4 (0.72 V and 171.3 mW/m²). High COD removal and power density indicated the strong electrochemical activity of electroactive bacteria in the anode chamber of the MFCs, which was due to the low resistance in the MFCs could accelerate electron transfer and boost electrochemical reaction. Consequently, the optimal electrode spacing in MFCs was 2 cm. Further studies confirmed that Cr(VI) was removed and deposited in the form of Cr(III) on the electrode surface. High-throughput analysis suggested Pseudomonas species are the key electroactive bacteria for electricity generation.

TiO2 anchored on MoS2 nanosheets based on molybdenite exfoliation as an efficient cathode for enhanced Cr (VI) reduction in microbial fuel cell

MoS₂ nanosheet-decorated TiO₂ nanocomposites were prepared via facile liquid-phase exfoliation of natural molybdenite combined with in situ hydrolysis route. These materials were used as a photocathode for the first time in microbial fuel cell (MFC) to reduce hexavalent chromium (Cr (VI)). Results showed the maximum power density of 1 wt% MoS₂/TiO₂-based MFC was 3.7 and 1.9 times higher than that of blank graphite and TiO₂-based MFC, respectively. This MFC achieved 99.57% removal of Cr (VI) with a concentration of 20 mg L^-1 within 8 h under visible light illumination at pH 2 and high degradation rate of 2.49 g m^-3 h^-1. The introduction of MoS₂ nanosheets as a cocatalyst can expand the absorption of visible light, thereby leading to increased electronic participation in Cr (VI) reduction. Moreover, the appropriate amounts of MoS₂ nanosheets also contribute to electrons migration and additional active site. The enhanced power output and Cr (VI) reduction efficiency of MFC can be attributed to the synergistic coupling between bioanode and MoS₂/TiO₂ photocathode. On the basis of its facile and scalable synthetic strategy as well as its stable and outstanding photoelectrocatalytic performance for MFC, this MoS₂/TiO₂ nanocomposite showed potential in the efficient treatment of wastewater.

A review on the contribution of electron flow in electroactive wetlands: Electricity generation and enhanced wastewater treatment

In less than a decade, bioelectrochemical systems/microbial fuel cell integrated constructed wetlands (electroactive wetlands) have gained a considerable amount of attention due to enhanced wastewater treatment and electricity generation. The enhancement in treatment has majorly emanated from the electron transfer or flow, particularly in anaerobic regions. However, the chemistry associated with electron transfer is complex to understand in electroactive wetlands. The electroactive wetlands accommodate diverse microbial community in which each microbe set their own potential to further participate in electron transfer. The conductive materials/electrodes in electroactive wetlands also contain some potential, due to which, several conflicts occur between microbes and electrode, and results in inadequate electron transfer or involvement of some other reaction mechanisms. Still, there is a considerable research gap in understanding of electron transfer between electrode-anode and cathode in electroactive wetlands. Additionally, the interaction of microbes with the electrodes and understanding of mass transfer is also essential to further understand the electron recovery. This review mainly deals with the electron transfer mechanism and its role in pollutant removal and electricity generation in electroactive wetlands.

Improved bio-electricity production in bio-electrochemical reactor for wastewater treatment using biomass carbon derived from sludge supported carbon felt anode

Microbial fuel cell (MFC), a promising bio-electrochemical reactor could decompose organics in wastewater by redox processes of electro-active microorganism in anode and produce bio-energy, and the total MFC performance could mainly rely on electrochemical performance anode. Here, biomass carbon derived from municipal sludge was employed as low-cost and high-performance bio-anode for enhancing bioelectricity generation and wastewater treatment in MFC simultaneously. The electrochemical tests demonstrated that the large electrochemical active surface area, strong conductivity, and good biocompatibility in sludge carbon (SC) electrode resulted in higher power density (615.2 mW m^-2) and lower power loss (5.4%) than those of none carbon (NC) electrode in long term operation. After 30-cycle of continuous running, the low loss of chemical oxygen demand (COD) removal was achieved up to 5.2%, which was smaller than that of NC electrode (14.1%), indicating that the MFC with SC anode could effectively treat wastewater and keep stable redox processes in anode electrode. After the formation of biofilm, the charge transfer resistance of SC electrode (16.38 Ω) was 72.4% lower than that of NC electrode (59.35 Ω). High-throughput analysis of biofilm exhibit Proteobacteria was the dominant electro-active bacteria, and the modification of SC could slightly change the bacterial community. Therefore, resource utilization of natural wastes provided the novel concept of anode catalyst fabrication for MFC in enhancing electron transfer, power output and wastewater decomposition.

Quantitative evaluation of effects of different cathode materials on performance in Cd(II)-reduced microbial electrolysis cells

Three materials including stainless steel woven mesh (SSM), nickel foam (NF) and carbon cloth (CC) were conducted as cathode in Cd(II)-reduced microbial electrolysis cells (MECs), respectively. By using electrode potential slope (EPS) method, the experimental open circuit potentials of three cathodes were similar, while the SSM cathode showed the smallest resistance (6 ± 1 mΩ m²), following by NF cathode (18 ± 2 mΩ m²) and CC cathode (32 ± 5 mΩ m²). These values were analyzed to predicte higher current density and more positive cathode potential in the MEC with SSM cathode under subsequent operating conditions. Electrochemical performance was more likely to be limited by current density than cathode potential. Accordingly, the MEC with SSM cathode obtained better system performance than that with other cathodes. This study further expands the application of EPS method that quantitatively evaluating and effectively selecting cathode materials for better system performance in Cd(II)-reduced MECs.

Simultaneous copper removal and electricity production and microbial community in microbial fuel cells with different cathode catalysts

With graphene oxide (GO), platinum carbon (Pt/C), and reduced graphene oxide (rGO) as cathode catalysts, three types of single-chamber microbial fuel cells (MFCs) were constructed for simultaneous Cu²⁺ removal and electricity production. Results indicated rGO-MFC and Pt/C-MFC had much better Cu²⁺-removing and electricity-generating performance than that of GO-MFC, and rGO-MFC presented preferable electrochemical characteristics compared with Pt/C-MFC. Microbial community analysis indicated Geobacter dominated anodic biofilms and was mainly responsible for organics degradation and electricity generation. The dual bio-selective effects by cathode catalyst and toxic Cu²⁺ resulted in different cathodic microbial communities. At high Cu²⁺ contents, Nitratireductor, Ochrobactrum, and Serratia as efficient Cu²⁺-removing genera played key roles in Pt/C-MFC, and Azoarcus predominant in cathodic biofilms of rGO-MFC might be important contributor for the favorable performance in this case.

Autochthonous N-doped carbon nanotube/activated carbon composites derived from industrial paper sludge for chromate (VI) reduction in microbial fuel cells

The performance of microbial electrochemical system for hexavalent chromium (Cr(VI)) contaminant has been a severe challenge remaining active for further development. In this study, we developed a novel biochar material from industrial paper sludge for microbial fuel cell cathode fabrication to reduce aquatic Cr(VI) to non-toxic Cr(III). With additive melamine as nitrogen source and self-containing small portion of Fe as catalyst, the sludge evolved into electroactive biochar (BC-M) rendering a unique N-doped carbon nanotubes/activated carbon (N-CNT/AC) frame after pyrolyzed at 900 °C for 2 h. Electrochemical analysis revealed enhanced electron transference capacity of this composite material, such effectiveness was attributed to the increased surface area and superior electroconductivity of N-doped CNTs. For performance of Cr(VI) reduction, a 55.1% reduction efficiency was achieved in an microbial fuel cell equipped with BC-M cathode while it reduced to about 41.8% when the cathode was replaced by electrode modified with no-melamine-involved biochar. The strategy of biochar upgrading from industrial paper sludge proposed in this work is expected to not only bring technical solution for low-cost CNT materials preparation for Cr(VI) reduction, but also put forward further research on value-added chemical synthesis from waste in various fields of energy and environment.

Enhancement of power generation with concomitant removal of toluene from artificial groundwater using a mini microbial fuel cell with a packed-composite anode

Composite beads are packed in the anode chamber of a microbial fuel cell (MFC), providing more area for microbial attachment and growth, increasing the efficiency of removal of toluene from toluene-contaminated groundwater. The composite beads were fabricated by integrating carbon coke (CC) with a relatively large specific surface area to which microorganisms easily adhere with conductive carbon black (CCB), which has low electrical resistance. Since the advantages of both are complementary, the power generation of MFC is improved. The single layer-packed anode MFC (SP-MFC) completely degraded 200 mg L^-1 of toluene - 2.3 times faster than the non-packed anode MFC (NP-MFC). The high power density (44.9 mW m^-3) and oxidation peak (1 mA), with low internal resistance (207 Ω) revealed that SP effectively improved the power generation efficiency. A composition ratio (CR_CCB:CC) of composite beads of one to two yielded the best performance with a removal efficiency of 100 % - 76 % faster than CC. The closed circuit voltage of CR_1:2 MFC reached 340 mV, which was 16 times that of CC; the power density and oxidation peak reached 103 mW m^-3 and 1.38 mA, respectively. Therefore, CR_1:2 effectively increased the overall removal efficiency and power generation of the MFC.

Recent advances in the recovery of metals from waste through biological processes

Wastes containing critical metals are generated in various fields, such as energy and computer manufacturing. Metal-bearing wastes are considered as secondary sources of critical metals. The conventional physicochemical methods of metals recovery are energy-intensive and cause further pollution. Low-cost and eco-friendly technologies including biosorbents, bioelectrochemical systems (BESs), bioleaching, and biomineralization, have become alternatives in the recovery of critical metals. However, a relatively low recovery rate and selectivity severely hinder their large-scale applications. Researchers have expanded their focus to exploit novel strain resources and strategies to improve the biorecovery efficiency. The mechanisms and potential applicability of modified biological techniques for improving the recovery of critical metals need more attention. Hence, this review summarize and compare the strategies that have been developed for critical metals recovery, and provides useful insights for energy-efficient recovery of critical metals in future industrial applications.

Improved cathodic oxygen reduction and bioelectricity generation of electrochemical reactor based on reduced graphene oxide decorated with titanium-based composites

A kind of reduced graphene oxide decorated with titanium-based (RGO/TiO₂) composites are successfully synthesized and employed in this current study as a novel nonprecious metal catalyst for enhancing bioelectricity generation and cathodic oxygen reduction reaction (ORR) in single chamber microbial fuel cells (MFCs). Compared with commercial Pt/C, RGO/TiO₂ shows obviously enhanced oxygen reduction reaction activity due to the appropriately-permeated, large electrochemical active area, enough exposure of electrocatalytic active sites of RGO/TiO₂. The air-cathode MFC with RGO/TiO₂-1 cathode achieves 1786.7 mW m^-3 of power density, 86.7% ± 1.2% of COD removal and 31.6% ± 1.1% of CE, which are higher than commercial Pt/C. Moreover, RGO/TiO₂-1 cathode exhibits high-effective electrocatalytic activity, and the power density of RGO/TiO₂-1 can keep a stable level and only has a minor decline (5.35%) during 30-cycles operation. These results indicate that RGO/TiO₂-1 is a potential cathode catalyst, markedly enhancing cathode ORR, wastewater treatment efficiency, and bioelectricity generation of MFC.

An excellent alternative composite modifier for cathode catalysts prepared from bacterial cellulose doped with Cu and P and its utilization in microbial fuel cell

In this study, bacterial cellulose doped with phosphorus and copper via freeze-drying and high-temperature pyrolysis was used to prepare MFC cathode catalysts. After a series of characterization, the synthesized catalyst showed a three-dimensional network with a specific surface area of 580.09 m²/g. Due to the doping of Cu and P, more active sites were induced in the pores of bacterial cellulose and subsequently improved catalytic activity. The prepared catalyst was coated on the air cathode surface of the MFC to obtain the maximum output power and current density of 1177.31 mW/m² and 6.73 A/m², respectively, which were higher than those of Pt (1044.93 mW/m² and 6.02 A/m²). This work aimed to improve bioelectrical generation in MFC and find alternative commercial Pt catalysts.