Bio-based fertilizers: A practical approach towards circular economy

Towards climate neutrality in the Spanish N-fertilizer sector: A study based on radiative forcing

Agricultural systems in the 21st Century face the double challenge of achieving climate neutrality while maintaining food security. Synthetic fertilizers rich in nitrogen (N-fertilizers) boost agricultural production at the expense of increasing climate impact. Public policies, such as the Farm-to-Fork (F2F) Strategy, aim to reduce the extensive use of N-fertilizers with the ultimate goal of achieving a climate neutral European Union (EU). However, the strong link between N-fertilizers and GHG emissions (i.e., CO2, CH4 and, especially, N2O) highlights the need to better understand the climate impact of this sector. The present study conducts a climate impact analysis of Spanish N-fertilizer sector for two periods: (i) from 1960 to 2020 using real data and (ii) from 2021 to 2100 considering five forecasted scenarios. The scenarios range from business-as-usual practices to a full accomplishment of the goals pursued by the EU's F2F strategy. The system's climate stability and neutrality are analysed for the different scenarios based on radiative forcing (RF) metrics. Additionally, the study evaluates the short-term impact of the EU decarbonization goals on the climate impact of the Spanish N-fertilizer sector. The results of the study illustrate that the long-lasting climate impact of N2O and CO2 emissions compromise the capacity of N-fertilizer sector to achieve climate stability and approach climate neutrality. However, the decarbonisation of transport and N-fertilizer production activities is an important driver to substantially reduce the life cycle CH4 and CO2 emissions in the Spanish N-fertilizer sector. The results also highlight that more severe reductions on N-cycles than those suggested by the EU's F2F are required, especially to reduce the long-lasting N2O emissions in the N-fertilizer sector. Overall, the study concludes that using RF-based metrics increases robustness and transparency of climate assessments, which is necessary for a higher integration of climate science within public policymaking.

Efficient PPCPs removal from wastewaters via a novel A/O-MBBR system: Transition towards circular economy in the water sector

As industrial and agricultural production depends on water supply, it is crucial for economic development. The available freshwater reserves on Earth are insufficient to meet humanity's growing demands. This study establishes a three-stage anoxic/oxic (A/O)-moving bed biofilm reactor (MBBR) system. The study evaluated the wastewater purification capacity of the system in summer and winter, examined the system's removal efficiency of 10 pharmaceuticals and personal care products (PPCPs) from the water, and analyzed the composition of microbial communities. Results indicate that the system effectively removes pollutants and PPCPs, with the aerobic tanks in the first two A/O stages playing a significant role in PPCP removal. The system is effective in removing four kinds of pollutants: AMP, IBU, CLR, and CAF, and the removal efficiency of CAF is up to 99.2%. Seasonal variations significantly affect the removal of PPCPs and bacterial growth, leading to changes in bacterial species. At the genus level, 41 bacterial types presented different effects in response to temperature changes, with Trichoderma and c_OM190_unclassified being the most affected. This study provides essential theoretical support for reducing pollutant levels and improving water recycling and economic efficiency.

Assessment of pilot-scale sewage sludge pelletization for non-food crop fertilization: nutrient content, pathogenicity, and growth performance

Application of sewage sludge as fertilizer can be beneficial for sustainable agriculture as it could largely account for nitrogen and phosphorus demand for crops and has lower costs compared to other disposal routes, e.g., incineration, and sanitary landfills. This study evaluates the feasibility of pilot-scale pelletization of sewage sludge for non-food crops (e.g., ornamental plants). The co-pelletization method was designed by mixing sewage sludge and binder (tapioca starch) at a 9:1 sludge-to-starch weight ratio. The amount of nitrogen (N), phosphorus (P), and potassium (K) of the resultant pellets were determined at 5.7%, 4.9%, and 0.2%, respectively. Following Malaysian and US Standards, non-essential elements and pathogenicity of the pelletized sewage sludge were measured below the predetermined limits and hence safe for agricultural application. The planting trial using 50% inorganic fertilizer + 50% sewage sludge pellets exhibited a promising result on the growth of the flowering plant Celosia plumosa, with having better dimension and color, 20% higher in height, 4% more chlorophyll content, 54% more leaf, 43% greater stem growth, and 27% more flowers compared to control. Likewise, the planting trial on Tagetes erecta resulted in 10.5% wider leaf, 10.6% heavier leaf dry weight, and 12.5% more chlorophyll content compared to control with full usage of inorganic fertilizer. By considering liquidities to operate the production facility, the economic analysis estimated that the production cost per ton of pelletized sewage sludge produced was USD 0.98.

Advancing sustainable wastewater management: A comprehensive review of nutrient recovery products and their applications

Wastewater serves as a vital resource for sustainable fertilizer production, particularly in the recovery of nitrogen (N) and phosphorus (P). This comprehensive study explores the recovery chain, from technology to final product reuse. Biomass growth is the most cost-effective method, valorizing up to 95 % of nutrients, although facing safety concerns. Various techniques enable the recovery of 100 % P and up to 99 % N, but challenges arise during the final product crystallization due to the high solubility of ammonium salts. Among these techniques, chemical precipitation and ammonia stripping/ absorption have achieved full commercialization, with estimated recovery costs of 6.0-10.0 EUR kgP-1 and 4.4-4.8 £ kgN-1, respectively. Multiple technologies integrating biomass thermo-chemical processing and P and/or N have also reached technology readiness level TRL = 9. However, due to maturing regulatory of waste-derived products, not all of their products are commercially available. The non-homogenous nature of wastewater introduces impurities into nutrient recovery products. While calcium and iron impurities may impact product bioavailability, some full-scale P recovery technologies deliver products containing this admixture. Recovered mineral nutrient forms have shown up to 60 % higher yield biomass growth compared to synthetic fertilizers. Life cycle assessment studies confirm the positive environmental outcomes of nutrient recycling from wastewater to agricultural applications. Integration of novel technologies may increase wastewater treatment costs by a few percent, but this can be offset through renewable energy utilization and the sale of recovered products. Moreover, simultaneous nutrient recovery and energy production via bio-electrochemical processes contributes to carbon neutrality achieving. Interdisciplinary cooperation is essential to offset both energy and chemicals inputs, increase their cos-efficiency and optimize technologies and understand the nutrient release patterns of wastewater-derived products on various crops. Addressing non-technological factors, such as legal and financial support, infrastructure redesign, and market-readiness, is crucial for successfully implementation and securing the global food production.

Foliar application of various biostimulants produces contrasting response on yield, essential oil and chemical properties of organically grown sage (Salvia officinalis L.)

Sage (Salvia officinalis L.) is a medicinal and aromatic plant (MAP) belonging to the Lamiaceae family. Its morphological, productive and chemical characteristics are affected by abiotic and biotic factors. The use of biostimulants seems to be one of the most interesting innovative practices due to fact they can represent a promising approach for achieving sustainable and organic agriculture. Despite a large application in horticulture, the use of biostimulants on MAPs has been poorly investigated. On this basis, a field experiment in a 2-year study was done to assess the effect of foliar treatments with different types of biostimulants (containing seaweeds, fulvic acids and protein hydrolysates) and two frequencies of application on morphological, productive, and chemical characteristics of S. officinalis grown organically in Mediterranean environment. Morphological, productive, and chemical parameters were affected by the factors. The biostimulant application generated higher plant height, chlorophyll content, relative water content, biomass yield and essential oil yield compared to control plants. In addition, more frequent application of biostimulants produced higher biomass and essential oil yield. The application of fulvic acid and protein hydrolysates every week produced the highest total fresh yields (between 3.9 and 8.7 t ha-1) and total dry yields (between 1.3 and 2.5 t ha-1). The essential oil yield almost doubled (33.9 kg ha-1) with a higher frequency of protein hydrolysates application. In this study, 44 essential oil compounds were identified, and the frequency factor significantly influenced the percentage of 38 compounds. The highest percentage of some of the most representative monoterpenes, such as 1,8-cineole, α-thujone and camphor, were observed in biostimulated plants, with average increases between 6% and 35% compared to control plants. The highest values for total phenolics, rosmarinic acid, antioxidant activity were obtained in control plants and with a lower frequency of biostimulant applications. This study emphasizes how biostimulant applications may be used to improve sage production performance and essential oil parameters when produced in agricultural organic system. At the same time, biostimulants application caused a decrease in total phenolic, antioxidant activity and rosmarinic acid values.

Exploring chitin: novel pathways and structures as promising targets for biopesticides

Chitin, the most prevalent polymer in nature, a significant structural polysaccharide that comes in second only to cellulose. Chitin is a crucial component of fungal cell walls and also present in many other creatures, such as viruses, plants, animals, insect exoskeletons, and crustacean shells. Chitin presents itself as a promising target for the development of biopesticides. It focuses on unraveling the unique structures and biochemical pathways associated with chitin, aiming to identify vulnerabilities that can be strategically leveraged for effective and environmentally sustainable pest control. It involves a comprehensive analysis of chitinase enzymes, chitin biosynthesis, and chitin-related processes across diverse organisms. By elucidating the molecular intricacies involved in chitin metabolism, this review seeks to unveil potential points of intervention that can disrupt essential biological processes in target pests without harming non-target species. This holistic approach to understanding chitin-related pathways aims to inform the design and optimization of biopesticides with enhanced specificity and reduced ecological impact. The outcomes of this study hold great promise for advancing innovative and eco-friendly pest management strategies. By targeting chitin structures and pathways, biopesticides developed based on these findings may offer a sustainable and selective alternative to conventional chemical pesticides, contributing to the ongoing efforts towards more environmentally conscious and effective pest control solutions.

Cadmium, zinc, and copper leaching rates determined in large monolith lysimeters

Soil mass balances are used to assess the risk of trace metals that are inadvertently applied with fertilizers into agroecosystems. The accuracy of such balances is limited by leaching rates, as they are difficult to measure. Here, we used monolith lysimeters to precisely determine Cd, Cu, and Zn leaching rates in 2021 and 2022. The large lysimeters (n = 12, 1 m diameter, 1.35 m depth) included one soil type (cambisol, weakly acidic) and distinct cropping systems with three experimental replicates. Stable isotope tracers were applied to determine the direct transfer of these trace metals from the soil surface into the seepage water. The annual leaching rates ranged from 0.04 to 0.30 for Cd, 2.65 to 11.7 for Cu, and 7.27 to 39.0 g (ha a)-1 for Zn. These leaching rates were up to four times higher in the year with several heavy rain periods compared to the dry year. Monthly resolved data revealed that distinct climatic conditions in combination with crop development have a strong impact on trace metal leaching rates. In contrast, fertilization strategy (e.g., conventional vs. organic) had a minor effect on leaching rates. Trace metal leaching rates were up to 10 times smaller than fertilizer inputs and had therefore a minor impact on soil mass balances. This was further confirmed with isotope source tracing that showed that only small fractions of Cd, Cu, and Zn were directly transferred from the soil surface to the leached seepage water within two years (< 0.07 %). A comparison with models that predict Cd leaching rates in the EU suggests that the models overestimate the Cd soil output with seepage water. Hence, monolith lysimeters can help to refine leaching models and thereby also soil mass balances that are used to assess the risk of trace metals inputs with fertilizers.

Changes in chemical properties and microbial communities' composition of a forest litter-based biofertilizer produced through aerated solid-state culture under different oxygen conditions

Fermented forest litter (FFL) is a bioproduct used as biofertilizer for several decades in Eastern Asia and Latin America. It is locally handcrafted by farmers in anaerobic conditions by fermenting forest litter added with agricultural by-products such as whey, cereal bran, and molasses. The aim of this study was to characterize the FFL process and product through gas and liquid chromatography analyses. It also provides some highlights on the influence of O2 on this solid-state culture. Under anoxic condition, a maximum CO2 production rate (CDPR) of 0.41 mL/h∙g dry matter (dm) was reached after 8 days. The main volatile organic compounds (VOCs) were ethanol and ethyl acetate, with a production rate profile similar to CDPR. After 21 days of culture, no residual sucrose nor lactose was detected. Lactic and acetic acids reached 58.8 mg/g dm and 10.2 mg/g dm, respectively, ensuring the acidification of the matrix to a final pH of 4.72. A metabarcoding analysis revealed that heterolactic acid bacteria (Lentilactobacillus, Leuconostoc), homolactic acid bacteria (Lactococcus), and yeasts (Saccharomyces, Clavispora) were predominant. Predicted genes in the microbiome confirmed the potential link between detected bacteria and acids and VOCs produced. When O2 was fed to the cultures, final pH reached values up to 8.5. No significant amounts of lactic nor acetic acid were found. In addition, a strong shift in microbial communities was observed, with a predominance of Proteobacteria and molds, among which are potential pathogens like Fusarium species. This suggests that particular care must be brought to maintain anoxic conditions throughout the process.

Sustainable strategies: Nature-based solutions to tackle antibiotic resistance gene proliferation and improve agricultural productivity and soil quality

The issue of antibiotic resistance is now recognized by the World Health Organisation (WHO) as one of the major problems in human health. Although its effects are evident in the healthcare settings, the root cause should be traced back to the One Health link, extending from animals to the environment. In fact, the use of organic fertilizers in agroecosystems represents one, if not the primary, cause of the introduction of antibiotics and antibiotic-resistant bacteria into the soil. Since the concentrations of antibiotics introduced into the soil are residual, the agroecosystem has become a perfect environment for the selection and proliferation of antibiotic resistance genes (ARGs). The continuous influx of these emerging contaminants (i.e., antibiotics) into the agroecosystem results in the selection and accumulation of ARGs in soil bacteria, occasionally giving rise to multi-resistant bacteria. These bacteria may harbour ARGs related to various antibiotics on their plasmids. In this context, these bacteria can potentially enter the human sphere when individuals consume food from contaminated agroecosystems, leading to the acquisition of multi-resistant bacteria. Once introduced into the nosocomial environment, these bacteria pose a significant threat to human health. In this review, we analyse how the use of digestate as an organic fertilizer can mitigate the spread of ARGs in agroecosystems. Furthermore, we highlight how, according to European guidelines, digestate can be considered a Nature-Based Solution (NBS). This NBS not only has the ability to mitigate the spread of ARGs in agroecosystems but also offers the opportunity to further improve Microbial-Based Solutions (MBS), with the aim of enhancing soil quality and productivity.

Lignocellulosic biomass fertilizers: Production, characterization, and agri-applications

The growing focus on sustainable agriculture and optimal resource utilization has spurred investigations into lignocellulosic biomass as a potential source for producing environmentally friendly fertilizers. This paper reviews recent advancements in the production and application of innovative fertilizers derived from lignocellulose. It highlights potential in enhancing agricultural productivity and reducing environmental impacts such as carbon footprint and water pollution. The paper outlines various methods for conversion, highlighting the unique advantages of chemical, enzymatic, and microbiological processes, for converting lignocellulosic biomass into nutrient-rich fertilizers. The study compares the efficacy of lignocellulosic fertilizers to traditional fertilizers in promoting crop growth, enhancing soil health, and reducing nutrient losses. The results demonstrate the potential of lignocellulosic biomass-derived fertilizers in promoting resource efficiency and sustainable agriculture. While this research significantly contributes to the existing body of knowledge, further studies on long-term impacts and scalability are recommended for the development of innovative and sustainable agricultural practices.

A novel biochar-augmented enzymatic process for conversion of food waste to biofertilizers: Planting trial with leafy vegetable

The present study developed a novel biochar-augmented enzymatic approach for fast conversion of food waste to solid and liquid biofertilizers. By augmented with 10 % of biochar and mediated with 5 % of food waste-derived hydrolytic enzymes mixture (i.e. fungal mash), 100 kg of food waste could be converted into 22.3 kg of solid biofertilizer with a water content of 30 % and 55.0 kg of liquid biofertilizer, which fulfilled Chinese national standards for solid and liquid organic biofertilizers, respectively. Field plantation results showed that the Pak Choi grown on food waste-derived biofertilizers was comparable with that on commercial ones, in terms of the vegetable productivity and nutrient contents. It was further revealed that the application of food waste-derived biofertilizers did not change soil chemical properties but enriched microbial diversity. This study clearly indicated that the biochar-augmented enzymatic approach for food waste conversion to biofertilizers was technically feasible and economically viable towards circular agriculture economy.

Treatment of anaerobically digested pig manure by applying membrane processes for nutrient recovery and antibiotics removal

A combination of membrane processes was applied to treat the digestate produced after the anaerobic treatment of pig manure in a biogas plant, aiming towards the recovery of nutrients and effective water treatment for potential reuse. Initially, coarse filtration (sieving and microfiltration) was used to remove particles larger than 1 µm, followed by ultrafiltration, to reduce the suspended solids concentrations below 1 g/L. Subsequently, selective electrodialysis is employed to recover the main nutrient ions, primarily ammonium and potassium. The ion-depleted digestate is then fed to a reverse osmosis unit, where clean water was recovered, yielding a by-product (concentrate) stream enriched in phosphates and organics content. The presence of antibiotics and the concentrations of heavy metals were monitored during all treatment stages to assess their behavior/removal in the various membrane processes. The results indicate that almost 51% of the digestate could be recovered as water free from ions and antibiotics, suitable for reuse in the biogas plant for process needs and irrigation purposes. The selective electrodialysis process can recover 51% of initial NH4+ content (corresponding to 96% of the electrodialysis feed), while the remainder largely ended up in the ultrafiltration concentrate. A similar behavior was observed for the case of K+, while approximately 68% of the phosphates content was retained by the coarse filtration process, with another 24% remaining in the ultrafiltration concentrate and the remaining 8% in the reverse osmosis concentrate. Most of the antibiotics and heavy metals were retained by the coarse and ultrafiltration steps, with smaller amounts detected in the reverse osmosis concentrate.

Exposure assessment of plastics, phthalate plasticizers and their transformation products in diverse bio-based fertilizers

Bio-based fertilizers (BBFs) produced from organic waste have the potential to reduce societal dependence on limited and energy-intensive mineral fertilizers. BBFs, thereby, contribute to a circular economy for fertilizers. However, BBFs can contain plastic fragments and hazardous additives such as phthalate plasticizers, which could constitute a risk for agricultural soils and the environment. This study assessed the exposure associated with plastic and phthalates in BBFs from three types of organic wastes: agricultural and food industry waste (AgriFoodInduWaste), sewage sludge (SewSludge), and biowaste (i.e., garden, park, food and kitchen waste). The wastes were associated with various treatments like drying, anaerobic digestion, and vermicomposting. The number of microplastics (0.045-5 mm) increased from AgriFoodInduWaste-BBFs (15-258 particles g-1), to SewSludge-BBFs (59-1456 particles g-1) and then to Biowaste-BBFs (828-2912 particles g-1). Biowaste-BBFs mostly contained packaging plastics (e.g., polyethylene terephthalate), with the mass of plastic (>10 g kg-1) exceeding the EU threshold (3 g kg-1, plastics >2 mm). Other BBFs mostly contained small (< 1 mm) non-packaging plastics in amounts below the EU limit. The calculated numbers of microplastics entering agricultural soils via BBF application was high (107-1010 microplastics ha-1y-1), but the mass of plastic released from AgriFoodInduWaste-BBFs and SewSludge-BBFs was limited (< 1 and <7 kg ha-1y-1) compared to Biowaste-BBFs (95-156 kg ha-1y-1). The concentrations of di(2-ethylhexyl)phthalate (DEHP; < 2.5 mg kg-1) and phthalate transformation products (< 8 mg kg-1) were low (< benchmark of 50 mg kg-1 for DEHP), attributable to both the current phase-out of DEHP as well as phthalate degradation during waste treatment. The Biowaste-BBF exposed to vermicomposting indicated that worms accumulated phthalate transformation products (4 mg kg-1). These results are overall positive for the implementation of the studied AgriFoodInduWaste-BBFs and SewSludge-BBFs. However, the safe use of the studied Biowaste-BBFs requires reducing plastic use and improving sorting methods to minimize plastic contamination, in order to protect agricultural soils and reduce the environmental impact of Biowaste-BBFs.

Rice N-biofertilization by inoculation with an engineered photosynthetic diazotroph

Photosynthetic diazotrophs expressing iron-only (Fe-only) nitrogenase can be developed into a promising biofertilizer, as it is independent on the molybdenum availability in the soil. However, the expression of Fe-only nitrogenase in diazotrophs is repressed by the fixed nitrogen of the soil, limiting the efficiency of nitrogen fixation in farmland with low ammonium concentrations that are inadequate for sustainable crop growth. Here, we succeeded in constitutively expressing the Fe-only nitrogenase even in the presence of ammonium by controlling the transcription of Fe-only nitrogenase gene cluster (anfHDGK) with the transcriptional activator of Mo nitrogenase (NifA*) in several different ways, indicating that the engineered NifA* strains can be used as promising chassis cells for efficient expression of different types of nitrogenases. When applied as a biofertilizer, the engineered Rhodopseudomonas palustris effectively stimulated rice growth, contributing to the reduced use of chemical fertilizer and the development of sustainable agriculture.

Comparison of amino acid release between enzymatic hydrolysis and acid autolysis of rainbow trout viscera

Fish protein hydrolysates were obtained from cultured rainbow trout (Oncorhynchus mykiss) viscera using commercial and endogenous enzymes. Two methods were employed for hydrolysis: acid autolysis (also known as silage) at room temperature for 10 days in acidic conditions, until total solubilisation, and enzymatic hydrolysis using Alcalase 2.4 LFG, Protana Prime, and the endogenous enzymes in the viscera. The effectiveness of both methods in releasing free amino acids (FAA) was assessed. After evaluating the results, the most effective enzymatic hydrolysis was optimized. The findings indicated that enzymatic hydrolysis with Alcalase, Protana Prime and endogenous enzymes combined for 7 h at a dose of 1% of protein, and a 7-day acid autolysis yielded the highest degree of hydrolysis (83.8% and 75.8%), a yield of FAA from viscera of 5.9% and 3.2%, and a yield of FAA from total protein of 71.3% and 52.5%, respectively. In conclusion, the use of commercial enzymes was more efficient in releasing amino acids, but endogenous enzymes showed a strong proteolytic capacity during acid autolysis, suggesting it also as a promising method to produce FAA-rich hydrolysates.

A review of the influence of heat drying, alkaline treatment, and composting on biosolids characteristics and their impacts on nitrogen dynamics in biosolids-amended soils

Application of biosolids to agricultural land has gained increasing attention due to their rich nutrient content. There are a variety of treatment processes for converting sewage sludge to biosolids. Different treatment processes can change the physicochemical properties of the raw sewage sludge and affect the dynamics of nutrient release in biosolids-amended soils. This paper reviews heat drying, alkaline treatment, and composting as biosolids treatment processes and discusses the effects of these treatments on biosolid nitrogen (N) content and availability. Most N in the biosolids remain in organic forms, regardless of biosolids treatment type but considerable variation exists in the mean values of total N and mineralizable N across different types of biosolids. The highest mean total N content was recorded in heat-dried biosolids (HDB) (4.92%), followed by composted biosolids (CB) (2.25%) and alkaline-treated biosolids (ATB) (2.14%). The mean mineralizable N value was similar between HDB and ATB, with a broader range of mineralizable N in ATB. The lowest N availability was observed in CB. Although many models have been extensively studied for predicting potential N mineralization in soils amended with organic amendments, limited research has attempted to model soil N mineralization following biosolids application. With biosolids being a popular, economical, and eco-friendly alternative to chemical N-fertilizers, understanding biosolids treatment effects on biosolids properties is important for developing a sound biosolids management system. Moreover, modeling N mineralization in biosolids-amended soils is essential for the adoption of sustainable farming practices that maximize the agronomic value of all types of biosolids.

Indicator based multi-criteria decision support systems for wastewater treatment plants

Wastewater treatment plant decision makers face stricter regulations regarding human health protection, environmental preservation, and emissions reduction, meaning they must improve process sustainability and circularity, whilst maintaining economic performance. This creates complex multi-objective problems when operating and selecting technologies to meet these demands, resulting in the development of many decision support systems for the water sector. European Commission publications highlight their ambition for greater levels of sustainability, circularity, and environmental and human health protection, which decision support system implementation should align with to be successful in this region. Following the review of 57 wastewater treatment plant decision support systems, the main function of multi-criteria decision-making tools are technology selection and the optimisation of process operation. A large contrast regarding their aims is found, as process optimisation tools clearly define their goals and indicators used, whilst technology selection procedures often use vague language making it difficult for decision makers to connect selected indicators and resultant outcomes. Several recommendations are made to improve decision support system usage, such as more rigorous indicator selection protocols including participatory selection approaches and expansion of indicators sets, as well as more structured investigation of results including the use of sensitivity or uncertainty analysis, and error quantification.

Selective separation of nutrients and volatile fatty acids from food wastes using electrodialysis and membrane contactor for resource valorization

Transport and selectivity parameters describe the quantity and purity of nutrients and volatile fatty acids (VFAs) separated from fermentation media. However, the complexity of fermentation media and low nutrient concentrations hinder the optimal conditions of such parameters. Exploring technologies to overcome such limitations is crucial for selectively separating VFAs from nutrients in fermented media. The objectives of this study were to investigate the: (1) flux, (2) recovery, (3) concentration factor, and (4) specific energy consumption of nutrients (NH4+, K+, NO3-, and PO43-) and VFAs (acetic, propionic, and butyric acid) via electrodialysis (ED), and (5) selectively separate the VFAs from the nutrients in the ED concentrate using a hydrophobic membrane contactor (HMC). Synthetic feed and real industrial fermented food wastes were used for ED and HMC experiments. The ED consumed 0.395 kWh/kg, recovering 64-95% of the nutrients and VFAs, corresponding to 4.1-9.4 and 0.6-22.1 g/L nutrients and VFAs, respectively. The HMC selectively separated over 94% of VFAs after ED, with <2% nutrients contamination in the final VFA stream. The results suggest that applying HMC after ED can concentrate and selectively separate VFAs from nutrients in fermented food wastes, which can be valorized for bio-based fertilizers and chemical platforms.

Nutrient recovery from digestate: Pilot test experiments

A series of technologies have been employed in pilot-scale to process digestate, i.e. the byproduct remaining after the anaerobic digestion of agricultural and other wastes, with the aim of recovering nutrients and reducing the load of solids and organics from it, hence improving the quality of digestate for potential subsequent reuse. In this case the digestate originated from a mixture of dairy and animal wastes and a small amount of agricultural wastes. It was processed by the application of several treatments, applied in series, i.e. microfiltration, ultrafiltration, reverse osmosis, selective electrodialysis and combined UV/ozonation. The initially applied membrane filtration methods (micro- and ultra-filtration) removed most of the suspended solids and macromolecules with a combined efficiency of more than 80%, while the reverse osmosis (at the end) removed almost all the remaining solutes (85-100%), producing sufficiently clarified water, appropriate for potential reuse. In the selective electrodialysis unit over 95% of ammonium and potassium were recovered from the feed, along with 55% of the phosphates. Of the latter, 75% was retrieved in the form of struvite.

Saccharomyces pastorianus Residual Biomass Immobilized in a Polymer Matrix as a Biosorbent for Reactive Dye Removal: Investigations in a Dynamic System

The use of residual microbial biomass from various industries in emerging pollutant removal strategies represents a new area of research in the field. In this case, we examined how to remove reactive dyes from an aqueous solution utilizing a biosorbent made of residual biomass from immobilized Saccharomyces pastorianus (S. pastorianus) in a polymer matrix using a dynamic system. Fluidized bed column biosorption investigations were carried out on a laboratory scale. Brilliant Red HE-3B was chosen as the target molecule. The main parameters considered for this purpose were the flow rate (4.0 mL/min; 6.1 mL/min), initial pollutant concentration (51.2 mg/L; 77.84 mg/L), and biosorbent mass (16 g; 20 g). The experimental data of the fluidized bed study were evaluated by mathematical modeling. The Yoon-Nelson, Bohart-Adams, Clark, and Yan models were investigated for an appropriate correlation with the experimental data. An acceptable fit was obtained for a flow rate of 4 mL/min, an initial pollutant concentration of 51.2 mg/L, and a biosorbent amount of 20 g. The obtained results indicate that the biosorbent can be used efficiently in a dynamic system both for the removal of the studied dye and in extended operations with a continuous flow of wastewater. As a conclusion, the investigated biocomposite material can be considered a viable biosorbent for testing in the removal of reactive dyes from aqueous environments and creates the necessary conditions for the extension of studies toward the application of these types of biosorbents in the treatment of industrial effluents loaded with organic dyes.

Progress in Microbial Fertilizer Regulation of Crop Growth and Soil Remediation Research

More food is needed to meet the demand of the global population, which is growing continuously. Chemical fertilizers have been used for a long time to increase crop yields, and may have negative effect on human health and the agricultural environment. In order to make ongoing agricultural development more sustainable, the use of chemical fertilizers will likely have to be reduced. Microbial fertilizer is a kind of nutrient-rich and environmentally friendly biological fertilizer made from plant growth-promoting bacteria (PGPR). Microbial fertilizers can regulate soil nutrient dynamics and promote soil nutrient cycling by improving soil microbial community changes. This process helps restore the soil ecosystem, which in turn promotes nutrient uptake, regulates crop growth, and enhances crop resistance to biotic and abiotic stresses. This paper reviews the classification of microbial fertilizers and their function in regulating crop growth, nitrogen fixation, phosphorus, potassium solubilization, and the production of phytohormones. We also summarize the role of PGPR in helping crops against biotic and abiotic stresses. Finally, we discuss the function and the mechanism of applying microbial fertilizers in soil remediation. This review helps us understand the research progress of microbial fertilizer and provides new perspectives regarding the future development of microbial agent in sustainable agriculture.

Effects of sodium sulfide concentration on the solid and solution chemistry of a biosolids slurry for phosphorus recovery and reuse

Municipal biosolids contain organic and inorganic phosphorus (P) that could be recovered for reuse as P fertilizer. Inorganic P compounds include iron phosphates that precipitate and/or adsorbed phosphate ions as a consequence of soluble iron addition in order not to exceed total phosphorus (TP) emission limits. The inorganic orthophosphate (o-Pi) minerals within biosolids can have low solubilities. One P recovery strategy is to maximize the dissolution of o-Pi from biosolids for reuse. Dissolving iron phosphates in biosolids by adding sodium sulfide was assessed as an o-Pi dissolution strategy. 10 % w/w biosolids slurries with a total phosphorus (TP) of 0.97 ± 0.03 mmol P/dry g were mixed with sulfide/TP (S2-/TP) molar ratios from 0 to 4 for up to 96 h. The maximum o-Pi concentration (48 ± 7 mM, or 42 ± 6 % of TP) was obtained for 4 S2-/TP after 24 h at room temperature (RT). Iron concentrations measured by colorimetry (ferrozine) reduced from 0.6 ± 0.1 mM to less than 0.01 mM (S2-/TP > 1). X-ray diffraction and FTIR suggest that sulfide treatment preferentially dissolved amorphous o-Pi-containing solids, vivianite, and minerals with iron, aluminum, phosphate, sulfate, and other subsitutions. Poorly crystalline erdite (NaFeS2 ·2H2O) was detected in products after S2-/TP treatment ratios ≥ 2. Incubation at RT or 37 °C did not affect the o-Pi concentrations for 0 or 4 S2-/TP over 47 h. Sulfide addition could also increase the risk of construction material corrosion, and reduce the efficiency of P recovery by precipitation. There are disadvantages to using sulfide to dissolve o-Pi from biosolids as a potential P recovery process.

Literature review on the potential of urban waste for the fertilization of urban agriculture: A closer look at the metropolitan area of Barcelona

Urban agriculture (UA) activities are increasing in popularity and importance due to greater food demands and reductions in agricultural land, also advocating for greater local food supply and security as well as the social and community cohesion perspective. This activity also has the potential to enhance the circularity of urban flows, repurposing nutrients from waste sources, increasing their self-sufficiency, reducing nutrient loss into the environment, and avoiding environmental cost of nutrient extraction and synthetization. The present work is aimed at defining recovery technologies outlined in the literature to obtain relevant nutrients such as N and P from waste sources in urban areas. Through literature research tools, the waste sources were defined, differentiating two main groups: (1) food, organic, biowaste and (2) wastewater. Up to 7 recovery strategies were identified for food, organic, and biowaste sources, while 11 strategies were defined for wastewater, mainly focusing on the recovery of N and P, which are applicable in UA in different forms. The potential of the recovered nutrients to cover existing and prospective UA sites was further assessed for the metropolitan area of Barcelona. Nutrient recovery from current composting and anaerobic digestion of urban sourced organic matter obtained each year in the area as well as the composting of wastewater sludge, struvite precipitation and ion exchange in wastewater effluent generated yearly in existing WWTPs were assessed. The results show that the requirements for the current and prospective UA in the area can be met 2.7 to 380.2 times for P and 1.7 to 117.5 times for N depending on the recovery strategy. While the present results are promising, current perceptions, legislation and the implementation and production costs compared to existing markets do not facilitate the application of nutrient recovery strategies, although a change is expected in the near future.

Urease inhibitors technologies as strategy to mitigate agricultural ammonia emissions and enhance the use efficiency of urea-based fertilizers

Experiments were conducted to evaluate the stability and degradation of NBPT under storage conditions and to quantify urease activity, ammonia losses by volatilization, and agronomic efficiency of urea treated with different urease inhibitors, measured in the field. Experiments included urea treated with 530 mg NBPT kg-1 (UNBPT) in contact with six P-sources (monoammonium phosphate-MAP; single superphosphate; triple superphosphate; P-Agrocote; P-Phusion; P-Policote), with two P-concentrations (30; 70%); the monitoring four N-technologies (SoILC; Limus; Nitrain; Anvol); and the application of conventional urea (UGRAN) or urea treated with urease inhibitors as topdressing in three maize fields, at three N rates. It is concluded that: the mixture of UNBPT and P-fertilizers is incompatible. When MAP granules were coated to control P-release (P-Agrocote), the degradation of NBPT was moderate (approximately 400 mg kg-1 at the end of the storage test). SoILC and Limus solvent technologies extended the NBPT half-life by up to 3.7 and 4.7 months, respectively. Under field, each inhibition technology reduced urease activity, and lowered the intensity of ammonia emission compared to UGRAN by 50-62%. Our results show that the concentration of NBPT is reduced by up to 53.7% for mixing with phosphates. In addition, even with coatings, the storage of mixtures of urea with NBPT and phosphates should be for a time that does not reduce the efficiency of the inhibitor after application, and this time under laboratory conditions was 168 h. The reduction of NBPT concentration in urea is reduced even in isolated storage, our results showed that the half-life time is variable according to the formulation used, being 4.7, 3.7, 2.8 and 2.7 days for Limus, SoILC, Nitrain and Anvol, respectively. The results of these NBPT formulations in the field showed that the average losses by volatilization in the three areas were: 15%, 16%, 17%, 19% and 39% of the N applied, for SoILC, Anvol, Nitrain, Limus and urea, respectively. The rate of nitrogen application affected all agronomic variables, with varied effects in Ingaí. Even without N, yields were higher than 9200 kg ha-1 of grains. The increase in nitrogen rates resulted in linear increases in production and N removal in Luminárias and Ingaí, but in Lavras, production decreased above 95.6 kg ha-1 of N. The highest production in Lavras (13,772 kg ha-1 of grains) occurred with 100 kg ha-1 of N. The application of Anvol reduced the removal of N in Ingaí.

Nutrient recovery and recycling from fishery waste and by-products

The circular bio-based economy offers great untapped potential for the food industry as possible valuable products and energy can be recovered from food waste. This can promote more sustainable and resilient food systems in Europe in follow-up of the European Commission's Farm to Fork strategy and support the global transition to more sustainable agri-food systems with the common agricultural and fisheries policies. With its high nutrient content, waste and by-products originating from fish and seafood industry (including aquaculture) are one of the most promising candidates to produce alternative fertilising products which can play a crucial role to replace synthetic mineral fertilisers. Whereas several studies highlighted the opportunities to recover valuable compounds from fishery waste, study towards their potential for the production of fertilising products is still scarce. This study presents an extensive overview of the characteristics of fishery waste and by-products (i.e., fish processing waste, fish sludge, seafood waste/by-products), the state-of-the-art nutrient recovery technologies and recovered nutrients as fertilising products from these waste streams. The European Commission has already adopted a revised Fertilising Products Regulation (EU) 2019/1009 providing opportunities for fertilising products from various bio-based origins. In frame of this opportunity, we address the quality and safety aspects of the fishery waste-derived fertilising products under these criteria and highlight possible obstacles on their way to the market in the future. Considering its high nutrient content and vast abundance, fish sludge has a great potential but should be treated/refined before being applied to soil. In addition to the parameters currently regulated, it is crucial to consider the salinity levels of such fertilising products as well as the possible presence of other micropollutants especially microplastics to warrant their safe use in agriculture. The agronomic performance of fishery waste-derived fertilisers is also compiled and reported in the last section of this review paper, which in most cases perform equally to that of conventional synthetic fertilisers.

Application of life cycle assessment to high quality-soil conditioner production from biowaste

The recent large-scale urbanization and industrialization resulted in an impressive growth of solid waste generation worldwide. Organic fraction generally constitutes a large fraction of municipal solid waste and its peculiar chemical properties open to various valorization strategies. On this purpose, life cycle assessment is applied to an innovative industrial system that processes 18 kt/y of agricultural and livestock waste into a high-quality soil conditioner. The high-quality soil conditioner production system consists of a series of processes, including anaerobic digestion and vermicomposting, allowing the generation of a peat-like material with high carbon content, porosity, and water-holding capacity. The presence of a photovoltaic plant and a cogeneration plant, fed with the biogas produced in the anaerobic digestion, makes the system entirely self-sufficient from the national grid and generating a surplus of electricity of 1177MWh/y. The high-quality soil conditioner showed better environmental performances in 15 out of 18 impact categories when compared to alternative scenarios. In particular, the high-quality soil conditioner and the related biowaste management resulted in a carbon saving of around 397 kg CO2 eq/ton compared with a scenario involving the employment of peat in place of the high-quality soil conditioner and a traditional biowaste management, and 165 kg CO2 eq/ton compared with a scenario where cogeneration is replaced by biomethane upgrading. This study demonstrates the possibility of using organic waste as an environmentally sustainable and renewable source for energy and carbon to soil conditioning.

Banana Peel Derived Chitosan-Grafted Biocomposite for Recovery of NH4+ and PO43

Biomass-derived adsorbents afford accessible and inexpensive harvesting of nitrogen and phosphorus from wastewater sources. Human urine is widely accepted as a rich source of nitrogen and phosphorus. However, direct use of urine in agriculture is untenable because of its unpleasant smell, pathogen contamination, and pharmaceutical residues. In this work, we have grafted chitosan onto dried and crushed banana peel (DCBP) to generate the biocomposite DCBP/Ch. A combination of FTIR, TGA, XRD, FESEM, EDX, and NMR analyses were used to characterize DCBP/Ch and reveal condensation-aided covalent conjugation between O-H functionalities of DCBP and chitosan. The adsorption performance of DCBP/Ch toward NH4+ and PO43- is in sync with its attractive surface porosity, elevated crystallinity, and thermostability. The maximum adsorption capacity of DCBP/Ch toward NH4+/PO43- was estimated as 42.16/15.91 mg g-1 at an operating pH of 7/4, respectively, and ranks highly when compared to previously reported bioadsorbents. DCBP/Ch performs admirably when tested on artificial urine. While nitrogen and phosphorus harvesting from human urine using single techniques has been reported previously, this is the first report of a single adsorbent for recovery of NH4+ and PO43-. The environmental compatibility, ease of preparation, and economic viability of DCBP/Ch present it as an attractive candidate for deployment in waste channels.

Monitoring settling of anaerobic digestates using low-field MRI profiling and NMR relaxometry measurements

Dewatering of anaerobic digestate from red meat processing was assessed using low field MRI profiling and NMR relaxometry. Samples were flocculated using a cationic flocculant (EM640CT) at dosing range (0 to 1.6% v/v) and monitored during the initial 30 min of settling via MRI profiling to assess changes in water fraction, settling time and initial settling velocity. The profiles showed decreasing settling time and increasing initial settling velocity with increased dosing, while sample porosity was observed to increase up to the optimal dosing point (0.8% v/v). Significant increases in sample variability were observed past this point due to flocculant overdosing. The samples were then analysed in terms of turbidity and NMR relaxometry. Increasing flocculant concentration caused turbidity to decrease from 210 to 13 NTU. The relaxation rate of free water showed a strong positive correlation with turbidity. T2 peaks observed before overdosing could be assigned to different water structures (free, interstitial, vicinal and hydration). An additional T2 population emerged in the T2 distributions at the optimal dosing point. Multivariate exploratory data analysis (MEDA) showed that this T2 population from the solids layer was strongly correlated with the total solids layer height and turbidity of the watery layer. This T2 peak formation may therefore be used to study opaque flocculated solids to monitor for water structures associated with flocculant overdosing. Further studies using this technique will aim to assess the potential of low field T2 relaxometry monitoring inline before mechanical dewatering, to monitor optimal flocculant dosing during continuous operations on systems with high solids concentration.

Sargassum macroalgae from Quintana Roo as raw material for the preparation of high-performance phosphate adsorbent from aqueous solutions

Currently, the large volumes of Sargassum biomass (Sgs) arriving on Caribbean coasts are a problem that must be solved quickly. One alternative is to obtain value-added products from Sgs. In this work, Sgs is demonstrated to be a high-performance Ca - bioadsorbent for phosphate removal by a heat pretreatment at 800 °C that produces biochar. According to XRD analysis, calcined Sgs (CSgs) have a composition of 43.68%, 40.51%, and 8.69% of Ca(OH)2, CaCO3, and CaO, making CSgs a promising material for phosphate removal and recovery. Results demonstrated that CSgs have a high capacity to adsorb P over a wide range of concentrations (25-1000 mg P/L). After P removal, at low P concentration, the adsorbent material is rich in apatite (Ca5(PO4)3OH), and at high P concentration, brushite (CaHPO4•2H2O) was the main P compound. The CSg reached a Qmax of 224.58 mg P/g, which is higher than other high-performance adsorbents reported in the literature. The phosphate adsorption mechanism was dominated by chemisorption, followed by precipitation according to the pseudo-second-order kinetic model. The solubility of P (74.5 wt%) in formic acid solution and the water-soluble P (24.8 wt%) for CSgs after P adsorption indicated that the final product presents the potential to be used as fertilizer for acid soils. This biomass's processability and high phosphate adsorption performance for P removal make CSgs a potential material for wastewater treatment, and subsequent use of these residues as fertilizer offers a circular economy solution to this problem.

Cost-effective tannery wastewater treatment using cyanobacteria: insights on the growth pattern and seedling vigor improvement with spent biomass

Nowadays to cope-up with the emerging global clean-water crisis, wastewater needs to be remediated properly to be used as an alternative source. Here a cost-effective approach has been taken to treat heavily-polluted (BOD-1234.33 mg L-1, COD-1706.64 mg L-1, TDS-6984 mg L-1, and sulfide-140.8 mg L-1 ammonium-134.5 mg L-1) Tannery Waste Water (TWW). Three cyanobacteria were (Arthrospira platensis, Leptolyngbyavalderiana, and Anabaenasphaerica) used as bio-reagents in pilot-scale treatment. Wastewater remediation-potential and biomass-generation capacity were evaluated in various TWW concentrations. The maximum biomass growth and the highest pollution removal percentage was observed when exposed to 50% TWW; although among the tested strain, Arthrospira and Leptolyngbya performed better than Anabaena by showing greater pollution removal potential (BOD 93%, COD 94%, sulfide 99%, ammonium 93%) in one hand and higher biomass production rate (100 mg L-1 Day-1) on the other. DO was increased noticeably by 10-15-fold. Morphological characterizations of tannery wastewater exposed Anabaena revealed unusual thick sheath formation, along with heterocyst and akinete formation in their trichome. Biochemical characterizations of remediating cyanobacteria showed presence of wastewater-accumulated nutrients (N, P, K). Nutrient-loaded biomass improved growth of rice and chickpea seedlings when used as a growth promoter. These facts have been illustrated by factor analysis and discriminant analysis. Cyanobacteria-mediated pilot-scale tannery wastewater treatment would create ecologically and economically-sustainable technology for clean-water production.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03712-x.

Short-Term Impact of Recycling-Derived Fertilizers on Their P Supply for Perennial Ryegrass (Lolium perenne)

Various nutrient recycling technologies are currently under development in order to alleviate the dependency of non-renewable raw material for the production of mineral phosphorus fertilizers commonly used in agriculture. The resulting products, such as struvites and ashes, need to be assessed for their application as so-called recycling-derived fertilizers (RDFs) in the agricultural sector prior to commercialization. Here, we conducted a short-term (54 days) trial to investigate the impact of different phosphorus fertilizers on plant growth and the soil P cycling microbiota. Lolium perenne was grown with application of superphosphate (SP) as inorganic fertilizer, two ashes (poultry litter ash (PLA) and sewage sludge ash (SSA)), and two struvites (municipal wastewater struvite (MWS) and commercial CrystalGreen® (CGS)) applied at 20 and 60 kg P ha-1 in four replicates. A P-free control (SP0) was also included in the trial. Struvite application increased plant dry weights, and available P acid phosphatase activity was significantly improved for struvites at the high P application rate. The ash RDFs showed a liming effect at 60 kg P ha-1, and PLA60 negatively affected acid phosphatase activity, while PLA20 had significantly lower phoD copy numbers. P mobilization from phosphonates and phytates was not affected. TCP solubilization was negatively affected by mineral SP fertilizer application at both P concentrations. The bacterial (16S and phoD) communities were only marginally affected by the tested P fertilizers. Overall, struvites appeared to be a suitable substitute for superphosphate fertilization for Irish L. perenne pastures.

Phytomanagement of trace element polluted fields with aromatic plants: supporting circular bio-economies

Trace elements pollution of soils became a global concern because of their persistence in the environment which can lead to accumulation in food chains up to toxic levels. At the same time, there is a shortage of arable land for growing food, fodder and industrial crops, which highlights the need for remediation/use of polluted land. Restoration of degraded lands has been included as a vital component of UN Sustainable Development Goals (SDGs). We summarize various sources of entry of important trace elements in the environment, available biological reclamation and management strategies and their limitations. Recent advances in phytomanagement approaches using aromatic crops to obtain economically valuable products such as essential oils and revalorize such polluted areas are reviewed. The worldwide application of this strategy in the last 10 years is illustrated through a choropleth map. Finally, the emerging concept of phytomanagement as a restorative and regenerative circular bio-economy is also discussed.

Fabrication, characterization and performance analysis of a two-step arsenic bio-filter column using Delftia spp. BAs29 and fired red mud pellets

Arsenic (As) is considered to be a grave inorganic pollutant, contaminating major aquifers worldwide. In this study, a two-step approach has been designed to combat this toxic metalloid by combining a highly efficient As (III) oxidizing bacteria; Delftia sp. BAs29 and fired red mud pellets to remove the total As from groundwater including both As (III) and As (V) ions. The maximum capacity of As (III) oxidation by Delftia sp. BAs29 was seen to be 95.65% for 500 ml of As contaminated groundwater using an optimized As (III) concentration of 300 ppb and 6.5 g of bacterial cell mass for 7 days. The second step indicated the maximum As (V) adsorption capacity by the stacked red mud pellets to be 97.91% for 500 ml of As contaminated groundwater using the optimized pore size of 106-125 μm for 7 days. The efficiency of As removal increased to 98.76% at a flow rate of 50 ml/h on combining of both the steps. In addition, the morphological properties, chemical composition, and the crystal structure of the As (V) adsorbed red mud pellets were characterized. The techno-economic feasibility of this entire unit was studied using SuperPro 10 software to estimate its optimal demand and potential. Hence, it is believed that scaling up of this two-step bio-filter column can serve as a potent filtration unit to eliminate As, both at the household and industrial level in the near future.

Drivers for circular economy development: making businesses more environmentally friendly

Stakeholders have been pressuring companies to develop more environmentally friendly strategic and operational solutions. In this sense, companies are seeking alternatives that reduce the negative impacts of organizational activities, Circular Economy (CE) is one of the solutions with the greatest potential for success. Thus, the goal of this paper is to provide drivers for organizations' transition from a linear to a CE. For this reason, content analysis was used as the scientific method, for being appropriate for the interpretation of qualitative data and the identification, clustering, and systematization of themes in a given field of knowledge. In the case of this work, a set of 30 articles with information related to the implementation and development of CE were analyzed, allowing the identification of 19 key elements of CE. These key elements were then grouped and systematized into four drivers: decision-making; capacity and training; sustainable practices; and green supply chain. Scientifically, this work contributes to the improvement and increase of the block of knowledge about the CE, because the drivers can be used to advance the state of the art and as a starting point for the development of new research. In an applied way, the drivers proposed in this article provide a range of actions for managers to make their companies greener and improve their organizational performance, thus contributing environmentally and socially to the planet.

Nutrient recovery and valorisation from pig slurry liquid fraction with membrane technologies

Livestock slurry has been reported to be a potential secondary raw material as it contains macronutrients ‑nitrogen, phosphorus and potassium-, which could be valorised as high-quality fertilizers if proper separation and concentration of valuable compounds is performed. In this work, pig slurry liquid fraction was assessed for nutrient recovery and valorisation as fertilizer. Some indicators were used to evaluate the performance of proposed train of technologies within the framework of circular economy. As ammonium and potassium species are highly soluble at the whole pH range, a study based on phosphate speciation at pH from 4 to 8 was assessed to improve the macronutrients recovery from the slurry, resulting in two different treatment trains at acidic and alkaline conditions. The acidic treatment system based on centrifugation, microfiltration and forward osmosis was applied to obtain a nutrient-rich liquid organic fertilizer containing 1.3 % N, 1.3 % P₂O₅ and 1.5 % K₂O. The alkaline path of valorisation was composed by centrifugation and stripping by using membrane contactors to produce an organic solid fertilizer -7.7 % N, 8,0 % P₂O₅ and 2.3 % K₂O-, ammonium sulphate solution -1.4 % N- and irrigation water. In terms of circularity indicators, 45.8 % of the initial water content and <50 % of contained nutrients were recovered - 28.3 % N, 43.5 % P₂O₅ and 46.6 % K₂O - in the acidic treatment resulting in 68.68 g fertilizer per kg of treated slurry. 75.1 % of water was recovered as irrigation water and 80.6 % N, 99.9 % P₂O₅, 83.4 % K₂O was valorised in the alkaline treatment, as 219.60 g fertilizer per kg of treated slurry. Treatment paths at acidic and alkaline conditions yield promising results for nutrients recovery and valorisation as the obtained products (nutrient rich organic fertilizer, solid soil amendment and ammonium sulphate solution) fulfil the European Regulation for fertilizers to be potentially used in crop fields.

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

The dynamics of macro- and microplastic quantity and size changes during the composting process

The quantity and type of macro- and microplastics was investigated in rotting material during the composting process of two state-of-the-art composting plants in Austria. Microplastics >0.2 mm, were found already after the first turning event in both facilities. The generation of microplastics was more extensive in the plant that used shorter turning intervals during the first four weeks and generated approx. 21 particles per week and kg^-1 DM. After 4 weeks of operation less microplastic particles were detected, which suggested that particles were fractionated to smaller sizes during processing. In addition, a total of nine composts from three different facilities that were operated in various settlement structures were compared. 7 to 232 macro- and microplastic particles per kg DM were found, whereas the highest plastic burden was observed in the composts made from biowaste that originated from the most densely populated area.

Roles of microalgae-based biofertilizer in sustainability of green agriculture and food-water-energy security nexus

For years, agrochemical fertilizers have been used in agriculture for crop production. However, intensive utilization of chemical fertilizers is not an ecological and environmental choice since they are destroying soil health and causing an emerging threat to agricultural production on a global scale. Under the circumstances of the increasing utilization of chemical fertilizers, cultivating microalgae to produce biofertilizers would be a wise solution since desired environmental targets will be obtained including (1) replacing chemical fertilizer while improving crop yields and soil health; (2) reducing the harvest of non-renewable elements from limited natural resources for chemical fertilizers production, and (3) mitigating negative influences of climate change through CO₂ capture through microalgae cultivation. Recent improvements in microalgae-derived-biofertilizer-applied agriculture will be summarized in this review article. At last, the recent challenges of applying biofertilizers will be discussed as well as the perspective regarding the concept of circular bio-economy and sustainable development goals (SDGs).

Mango Peel Nanofiltration Concentrates to Enhance Anaerobic Digestion of Slurry from Piglets Fed with Laminaria

The environmental impact of biowaste generated during animal production can be mitigated by applying a circular economy model: recycling, reinventing the life cycle of biowaste, and developing it for a new use. The aim of this study was to evaluate the effect of adding sugar concentrate solutions obtained from the nanofiltration of fruit biowaste (mango peel) to slurry from piglets fed with diets incorporating macroalgae on biogas production performance. The nanofiltration of ultrafiltration permeates from aqueous extracts of mango peel was carried out using membranes with a molecular weight cut-off of 130 Da until a volume concentration factor of 2.0 was reached. A slurry resulting from piglets fed with an alternative diet with the incorporation of 10% Laminaria was used as a substrate. Three different trials were performed sequentially: (i) a control trial (AD₀) with faeces resulting from a cereal and soybean-meal-based diet (S0); (ii) a trial with S₁ (10% L. digitata) (AD₁), and (iii) an AcoD trial to assess the effect of the addition of a co-substrate (20%) to S1 (80%). The trials were performed in a continuous-stirred tank reactor (CSTR) under mesophilic conditions (37.0 ± 0.4 °C), with a hydraulic retention time (HRT) of 13 days. The specific methane production (SMP) increased by 29% during the anaerobic co-digestion process. These results can support the design of alternative valorisation routes for these biowastes, contributing to sustainable development goals.

Soil Fertility Improvement with Mixtures of Wood Ash and Biogas Digestates Enhances Leaf Photosynthesis and Extends the Growth Period for Deciduous Trees

In the context of climate change, it is necessary to establish forest management by balancing more products, using less area, and minimizing environmental impacts. The use of different industrial bio-based by-products as soil conditioners in the last few decades has gain more interest, because it leads to an extended use time of these products and supports the circular economy. The aim of this study was to determine the effect of fertiliser made from cattle and pig manure biogas fermentation digestate and wood ash from two cogeneration plants, applied in different mixture ratios, to test its suitability for fertilisation of deciduous trees, using the physiological, morphological, and chemical parameters of the leaves as an indicator. We selected two poplar clones: foreign 'OP42' (syn. Hybrid 275) and local 'AUCE' annual shoot stem cuttings as planting materials. A negative control group with acidic forest mineral soil as substrate and four fertilised groups with different applied digestate and wood ash ratio mixtures to forest soil was established (ash:digestate 0:0 (Control), 1:1, 2:1, 3:1, 4:1). Mixture application improved growing conditions because all fertilised group poplars had longer growth periods and photosynthetic rates in August than the control group. Both local and foreign clones showed a good response to fertilisation in terms of leaf parameters. Poplar is a suitable culture to fertilise with bio-waste biogenic products, because of its capacity to absorb nutrients and fast response to fertilisation.

Revisiting the oldest manure of India, Kunapajala: Assessment of its animal waste recycling potential as a source of plant biostimulant

India's oldest documented manure, most commonly referred to as Kunapajala, has a long history of over 1,000 years in crop cultivation. Kunapajala is primarily an in-situ decomposition technology of animal waste and can potentially provide an eco-friendly pipeline for recycling bio-waste into essential plant nutrients. This traditional animal manure, in addition, also contains dairy excreta (e.g., feces and urine), dairy products (e.g., milk and ghee), natural resources (e.g., honey), broken seeds or grains, and their non-edible by-product waste. Here, we aimed to assess the waste recycling and plant biostimulant potential of Kunapajala prepared from livestock (e.g., Black Bengal goats) or fish (e.g., Bombay duck) post-processed wastes over different decomposition periods, e.g., (0, 30, 60, and 90-days). In this study, an in-situ quantification of livestock- (lKPJ) and fish-based Kunapajala (fKPJ) reveals a dynamic landscape of essential plant primary nutrients, e.g., (0.70 &gt; NH4-N &lt; 3.40 g•L−1), (100.00 &gt; P2O5 &lt; 620.00 mg•L−1), and (175.00 &gt; K2O &lt; 340.00 mg•L−1), including other physico-chemical attributes of Kunapajala. Using correlation statistics, we find that the plant-available nutrient content of Kunapajala depicts a significant (p &lt; 0.0001) transformation over decomposition along with microbial dynamics, abundance, and diversities, delineating a microbial interface to animal waste decomposition and plant growth promotion. Importantly, this study also reports the indole 3-acetic acid (IAA) content (40.00 &gt; IAA &lt; 135.00 mg•L−1) in Kunapajala. Furthermore, the bacterial screening based on plant growth-promoting traits and their functional analyses elucidate the mechanism of the plant biostimulant potential of Kunapajala. This assay finally reports two best-performing plant growth-promoting bacteria (e.g., Pseudomonas chlororaphis and Bacillus subtilis) by the 16S ribotyping method. In support, in-planta experiments have demonstrated, in detail, the bio-stimulative effects of Kunapajala, including these two bacterial isolates alone or in combination, on seed germination, root-shoot length, and other important agronomic, physio-biochemical traits in rice. Together, our findings establish that Kunapajala can be recommended as a source of plant biostimulant to improve crop quality traits in rice. Overall, this work highlights Kunapajala, for the first time, as a promising low-cost microbial technology that can serve a dual function of animal waste recycling and plant nutrient recovery to promote sustainable intensification in agroecosystems.

A typology of sustainable circular business models with applications in the bioeconomy

As an approach to sustainable development, circular business models are increasingly being developed. However, many circular business models focus on environmental or technological contributions to sustainability rather than considering all dimensions of sustainability simultaneously. Based on existing sustainable business model archetypes, a hierarchical business model typology is developed that allows a stepwise exploration of sustainable business model innovation opportunities incorporating an environmental, social and economic dimension. An analysis of business model components generates a closer look on the six newly defined Sustainable Circular Business Models. Finally, a conceptual application for organic waste valorization technologies, supported by examples from literature, allows a practical view on the implementation of the business models in the bio-economy. The typology offers a guide toward sustainable business model design or innovation opportunities centered around technologies creating value from waste.

Macro-nutrients recovery from liquid waste as a sustainable resource for production of recovered mineral fertilizer: Uncovering alternative options to sustain global food security cost-effectively

Global food security, which has emerged as one of the sustainability challenges, impacts every country. As food cannot be generated without involving nutrients, research has intensified recently to recover unused nutrients from waste streams. As a finite resource, phosphorus (P) is largely wasted. This work critically reviews the technical applicability of various water technologies to recover macro-nutrients such as P, N, and K from wastewater. Struvite precipitation, adsorption, ion exchange, and membrane filtration are applied for nutrient recovery. Technological strengths and drawbacks in their applications are evaluated and compared. Their operational conditions such as pH, dose required, initial nutrient concentration, and treatment performance are presented. Cost-effectiveness of the technologies for P or N recovery is also elaborated. It is evident from a literature survey of 310 published studies (1985-2022) that no single technique can effectively and universally recover target macro-nutrients from liquid waste. Struvite precipitation is commonly used to recover over 95 % of P from sludge digestate with its concentration ranging from 200 to 4000 mg/L. The recovered precipitate can be reused as a fertilizer due to its high content of P and N. Phosphate removal of higher than 80 % can be achieved by struvite precipitation when the molar ratio of Mg²⁺/PO₄^3- ranges between 1.1 and 1.3. The applications of artificial intelligence (AI) to collect data on critical parameters control optimization, improve treatment effectiveness, and facilitate water utilities to upscale water treatment plants. Such infrastructure in the plants could enable the recovered materials to be reused to sustain food security. As nutrient recovery is crucial in wastewater treatment, water treatment plant operators need to consider (1) the costs of nutrient recovery techniques; (2) their applicability; (3) their benefits and implications. It is essential to note that the treatment cost of P and/or N-laden wastewater depends on the process applied and local conditions.

Current and prognostic overview on the strategic exploitation of anaerobic digestion and digestate: A review

The depletion of fossil fuels and increasing demand for energy are encountered by generating renewable biogas. Anaerobic digestion (AD) produces not only biogas, also other value-added products from the digestate using various organic, municipal and industrial wastes which have several benefits like remediating waste, reduces greenhouse gas emissions, renewable energy generation and securing socio-economic status of bio-based industries. This review work critically analyzes the biorefinery approaches on AD process for the production of biogas and digestate, and their direct and indirect utilization. The left-out residue obtained from AD is called 'digestate' which enriched with organic matter, nitrogen, heavy metals and other valuable micronutrients. However, the direct disposal of digestate to the land as fertilizer/landfills creates various environmental issues. Keeping this view, the digestate should be upgraded or transformed into high valued products such as biofertilizer, pyrochar, biodiesel, syngas and soil conditioner that can aid to enrich the soil nutrients and ensures the safe environment as well. In this context, the present review focused to illustrate the current techniques and different strategic exploitations on AD proper management of digestate products for storage and further applications. Such a technology transfer provides a proven strategic mechanism towards the enhancement of the sustainability of bio-based industries, attaining the energy demand, safest waste management, protection of environment and reduces the socio-economic issues of the industrial sector.

Co-digestion of cow manure and food waste for biogas enhancement and nutrients revival in bio-circular economy

Anaerobic co-digestion (AcoD) with suitable substrate ratios may have the potential to improve biogas process and could play a better role in nutrient management for biocircular economy. The goal of this study was to enhance biogas yield from AcoD of cow manure (CM) and canteen food waste (CFW), and pertinent co-digestion of suitable substrate ratios for nutrient management i. e NPK from linear to biocircular economy, using ruminant intestinal fluid as a source of inoculum. A mesophilic (37 ± 1 °C) laboratory-scale AcoD with varying CFW/CM ratios of (0:1, 1:4, 2:3, 1:1, 3:2, 4:1, and 1:0) based on wet weight was performed. The AcoD systems of different CFW/CM ratios were evaluated with a loading rate of 400 g/L in the presence of 100 g cow intestinal fluid (CIF) inoculation. All experimental AcoD systems yielded greater biogas (147-300 cm3/g VS) than the mono-digestion in which only CM (135 cm3/g VS) and CFW (146 cm3/g VS) were digested anaerobically. The AcoD system of CFW/CM with 4:1 showed the highest biogas yield (300 cm3/g VS), and VS and COD reduction rate (39.51% and 65.15%, respectively), and nutrient contents (6.53%). Moreover, the experiment results were verified by modified Gompertz model. This work provided a window of opportunity to examine the anaerobic co-digestion technology beyond biogas production and to put the current low-cost technology to use for nutrient management and as a better component of the biocircular economy for agriculture in Pakistan in order to achieve sustainable development goals.

From liquid to solid-state, solvent-free oxidative ammonolysis of lignins – an easy, alternative approach to generate “N-lignins”†

A new chemical modification protocol to generate N-lignins is presented, based on Indulin AT and Mg²⁺-lignosulfonate. The already known ammonoxidation reaction in liquid phase was used as a starting point and stepwise optimised towards a full solid-state approach. The “classical” liquid ammonoxidation products, the transition products from the optimization trials, as well as the “solid-state” products were comprehensively analysed and compared to the literature. The N-lignins obtained with the conventional ammonoxidation protocol showed the same properties as reported. Their molar mass distributions and the hydroxy group contents, hitherto not accessible due to solubility problems, were measured according to a recently reported protocol. N-Indulin showed an N-content up to 11 wt% and N-lignosulfonate up to 16 wt%. The transition experiments from liquid to solid-state gave insights into the influence of chemical components and reaction conditions. The use of a single chemical, the urea-hydrogen peroxide complex (UHP, “carbamide peroxide”), was sufficient to generate N-lignins with satisfying N-content. This chemical acts both as an N-source and as the oxidant. Following the optimization, a series of solid-state ammonoxidation tests were carried out. High N-contents of 10% in the case of Indulin and 11% in the case of lignosulfonate were obtained. By varying the ratio of UHP to lignin, the N-content can be controlled. Structural analysis showed that the N is organically bound to the lignin, similar to the “classical” ammonoxidation products obtained under homogeneous conditions. Overall, a new ammonoxidation protocol was developed which does not require an external gas supply nor liquids or dissolved reactants. This opens the possibility for carrying out the lignin modification in closed continuous reactor systems, such as extruders. The new, facile solid-state protocol will hopefully help N-lignins to find more consideration as a fertilizing material and in soil-improving materials.

An alternative ammonoxidation protocol was developed. With this new approach in “solid-state” mode, one single solid reagent is sufficient to equip lignin with different N-functionalities.

Pilot-scale phosphate recovery from wastewater to create a fertiliser product: An integrated assessment of adsorbent performance and quality

Eutrophication and the predicted limited future availability of rock phosphate has triggered the increased development of phosphorus (P) recovery technologies, however, for remote regions, recovery solutions are still limited. Here, we report on a novel pilot-scale technology (FILTRAFLO^TM-P reactor) to recover phosphate (PO₄^3-) from wastewater effluent through a filtration/adsorption process in a rural setting. This unit employs enhanced gravitational filtration through adsorption media (here, a novel KOH deacetylated crab carapace based chitosan-calcite material (CCM)) with continuous self-backwashing. Trials were designed to assess how the FILTRAFLO^TM-P unit would operate under 'real' conditions (both at low and high PO₄^3- levels), and to ascertain the effectiveness of the adsorbent to recover phosphate from final effluent. High removal was achieved at low phosphate concentrations, bringing the residual effluent PO₄^3- level below 1 mg/L (EU limit for sensitive water bodies), while phosphate was efficiently harvested (at more than 50%) at higher PO₄^3- levels. Surface microprecipitation and inner-sphere complexation were postulated as the main PO₄^3- adsorption mechanisms through XRD, XPS and EDX elemental mapping. Further, a quality assessment of the P-enriched CCM (which could be used as a potential soil amendment) was undertaken to consider elemental composition, microbiological assessment and quantification of organic micropollutants. Quality analysis indicated ∼2.5% P₂O₅ present, trace levels (well below legislative limits) of heavy metals and extremely low levels of organic pollutants (e.g., PCBs, pharmaceuticals). No detectable levels of target bacterial pathogens were observed. Pot trials showed that ryegrass cultivated with the addition of the CCM adsorbent achieved higher plant dry matter and P concentration when compared to unfertilised controls, with a slow-release kinetic pattern. This study showed that CCM used with the FILTRAFLO^TM-P pilot reactor has high potential to recover phosphate from effluents and encourage resource recovery via bio-based management of waste.

Bio-Organic Fertilizer Promotes Pear Yield by Shaping the Rhizosphere Microbiome Composition and Functions

Bio-organic fertilizers (BOF) containing both organic amendments and beneficial microorganisms have been consistently shown to improve soils fertility and yield. However, the exact mechanisms which link amendments and yields remain disputed, and the complexity of bio-organic fertilizers may work in parallel in several ways. BOF may directly improve yield by replenishing soil nutrients or introducing beneficial microbial genes or indirectly by altering the soil microbiome to enrich native beneficial microorganisms. In this work, we aim to disentangle the relative contributions of direct and indirect effects on pear yield. We treated pear trees with either chemical fertilizer or organic fertilizer with/without the plant-beneficial bacterium Bacillus velezensis SQR9. We then assessed, in detail, soil physicochemical and biological properties (metagenome sequencing) as well as pear yield. We then evaluated the relative importance of direct and indirect effects of soil amendments on pear yield. Both organic treatments increased plant yield by up to 20%, with the addition of bacteria tripling the increase driven by organic fertilizer alone. This increase could be linked to alterations in soil physicochemical properties, bacterial community function, and metabolism. Supplementation of organic fertilizer SQR9 increased rhizosphere microbiome richness and functional diversity. Fertilizer-sensitive microbes and functions responded as whole guilds. Pear yield was most positively associated with the Mitsuaria- and Actinoplanes-dominated ecological clusters and with gene clusters involved in ion transport and secondary metabolite biosynthesis. Together, these results suggested that bio-organic fertilizers mainly act indirectly on plant yield by creating soil chemical properties which promote a plant-beneficial microbiome. IMPORTANCE Bio-organic fertilization is a widely used, eco-friendly, sustainable approach to increasing plant productivity in the agriculture and fruit industries. However, it remains unclear whether the promotion of fruit productivity is related to specific changes in microbial inoculants, the resident microbiome, and/or the physicochemical properties of rhizosphere soils. We found that bio-organic fertilizers alter soil chemical properties, thus manipulating specific microbial taxa and functions within the rhizosphere microbiome of pear plants to promote yield. Our work unveils the ecological mechanisms which underlie the beneficial impacts of bio-organic fertilizers on yield promotion in fruit orchards, which may help in the design of more efficient biofertilizers to promote sustainable fruit production.

Subcritical water pretreatment enhanced methane-rich biogas production from the anaerobic digestion of brewer's spent grains

ABSTRACTThis study evaluated the effectiveness of a semi-continuous flow-through subcritical water hydrolysis (SWH) pretreatment of brewer's spent grains (BSG) for subsequent application in the anaerobic digestion (AD) process. BSG pretreatment was conducted at 160 °C and 15 MPa with a flow rate of 10 mL water min-1 and 15 g water g-1 BSG. The results revealed that SWH attacked the hemicellulose structure, releasing arabinose (46.54 mg g-1) and xylose (39.90 mg g-1) sugars, and proteins (34.89 mg g-1). The start-up of anaerobic reactors using pretreated BSG (747.71 L CH4 kg-1 TVS) increased the methane yield compared with the reactor without pretreatment (53.21 L CH4 kg-1 TVS). For the process with pretreatment, the generation of electricity (134 kWh t-1 BSG) and heat (604 MJ t-1) are responsible for the mitigation of 43.90 kg CO2 eq t-1 BSG. The adoption of SWH as an eco-friendly pretreatment of biomass for AD could be a technological route to increase methane-rich biogas and bioenergy production, supporting the circular economy transition by reducing the carbon footprint of the beer industry.

Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability

Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K₂SO₄, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.