Directional depolymerization of lignin into high added-value chemical with synergistic effect of binary solvents

Sucrose-derived porous carbon catalyzed lignin depolymerization to obtain a product with application in type 2 diabetes mellitus

As the most important phenolic biopolymer in nature, lignin shows promising application potentialities in various bioactivities in vivo and in vitro, mainly including antioxidant, anti-inflammatory, hypolipidemic, and antidiabetic control. In this work, several carbon-based solid acids were synthesized to catalyze the fragmentation of organosolv lignin (OL). The generated lignin fragments, with controllable molecular weight and functional groups, were further evaluated for their application in the prevention and treatment of type 2 diabetes mellitus (T2DM). The results suggested that the urea-doped catalyst (SUPC) showed a more excellent catalytic performance in producing diethyl ether insoluble lignin (DEIL) and diethyl ether soluble lignin (DESL). In addition, the lignin fragments have a good therapeutic effect on the cell model of T2DM. Compared with the insulin resistance model, DEIL obtained by catalytic depolymerization of OL with SUPC could improve the glucose consumption of insulin-resistant cells. Moreover, low-concentration samples (50 μg/mL) can promote glucose consumption (19.7 mM) more than the traditional drug rosiglitazone (17.5 mM). This work demonstrates the prospect of depolymerized lignin for the prevention and treatment of T2DM and provides a new application field for lignin degradation products.

Activity and product distribution in Ni-Co and Ni-Cu catalyst-mediated lignin depolymerization into phenolic substances with isopropanol H-donating solvent

Lignin, a vital renewable biopolymer, serves as the Earth's primary source of aromatics and carbon. Its depolymerization presents significant potential for producing phenolic fine chemicals. This study assesses promoted Ni-based bimetallic catalysts (Ni-Co/C and Ni-Cu/C) supported on activated carbon in isopropanol for lignin depolymerization, compared to monometallic counterparts. BET, SEM, EDX, and XPS analyses highlight their physicochemical properties and promotional effects, enhancing hydrogenolysis activity and hydrogen transformation. Reaction parameter exploration elucidates the influence on lignin depolymerization, with cobalt and copper as promoters notably increasing conversion and monomer yield. Ni-Co/C exhibits the highest lignin conversion (94.2%) and maximum monomer yield (53.1 wt%) under specified conditions, with lower activation energy (36.1 kJ/mol) and higher turnover frequency (31.6 h-1) compared to Ni/C. FT-IR, GPC, GC-FID, and GC-MS analyses confirm effective depolymerization, identifying 20 monomer products. Proposed reaction mechanisms underscore the potential of Ni-based bimetallic catalysts for lignin valorization, offering insights into developing efficient catalytic systems for lignin hydrogenolysis. This research enhances understanding and facilitates the development of selective catalytic processes for lignin valorization.

Preparation of Ru/N-doped carbon catalysts by induction of different nitrogen source precursors for the hydroprocessing of lignin oil

The lignin oil produced by rapid pyrolysis of lignin is considered a promising liquid fuel source. Hydrodeoxygenation (HDO) is a kind of efficient method to upgrade the lignin oil, and a high-performance catalyst is key to the hydrodeoxygenation of lignin oil. In this study, a high dispersion and small size Ru nanoparticle loaded N-doped carbon catalyst was derived by the direct pyrolysis of a mixture of ruthenium trichloride and melamine, and it could efficiently convert lignin oil. The lignin oil was completely transformed at 240 °C and 1 MPa H₂, and 36.58% cyclohexane was obtained. The formation, surface area, and nitrogen species of the catalyst could be controlled by changing the precursor of the nitrogen-doped carbon support. The percentage of pyridine nitrogen possessed with melamine as a nitrogen-carbon precursor (31.35%) was much higher than that with urea (16.47%) and dicyandiamide (8.20%) as nitrogen-carbon precursors. The presence of pyridine nitrogen could not only serve as the coordination site for even dispersity and stability of Ru nanoparticles but also regulated the electron density of Ru nanoparticles (NPs) and increased the active site Ru⁰ through electron transfer.

Efficient preparation of nitrogen-doped lignin-based carbon nanotubes and the selectivity of nitrogen speciation for photothermal therapy

In this study, the lignin was pre-modified using small-molecule nitrogen-containing compounds, and then the nitrogen-doped lignin-based carbon nanotubes (L-NCNTs) were fabricated by pyrolysis using the modified lignin as raw materials. The obtained L-NCNTs were multi-walled carbon nanotubes with diameters between 10 and 80 nm. The modification of lignin had an important effect on the nitrogen morphology of L-NCNTs, and promoted the high selectivity of pyridine-N in the L-NCNTs. Defects and pyridinic-N structure were conducive to boosting photothermal properties of the L-NCNTs. The photothermal conversion efficiency of the L-NCNTs after 808 nm laser irradiation for 5 min reached 58.8 %. The L-NCNTs can be used as photothermal agents in drug delivery system to achieve mild photothermal therapy, and it is basically non-toxic to normal cells, indicating good biocompatibility. This work provides new ideas for development of lignin-based high value-added products from biomass.

Enhanced oxidative depolymerization of lignin in cooperative imidazolium-based ionic liquid binary mixtures

The aerobic oxidation of lignin model 2-phenoxyacetophenone (2-PAP) in cooperative ionic liquid mixtures (CoILs) with 1-ethyl-3-methylimidazolium acetate ([C₂C₁im]OAc) and 1-benzyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([B_ZC₁im]NTf₂) was investigated. Complete degradation of 2-PAP was achieved with [C₂C₁im]OAc/[B_ZC₁im]NTf₂ molar ratio (R_IL) of 1/1 and 1/2 at 100 °C for 2 h. The conversion and product yields from CoILs were higher than those in pure ILs, indicating the cooperative effects of [C₂C₁im]OAc/[B_ZC₁im]NTf₂ on cleaving aryl-ether bonds. [C₂C₁im]OAc promoted the catalytic cleavage of aryl-ether bonds and solvation, and [B_ZC₁im]NTf₂ induced the formation of alkyl radicals and enhanced the product selectivity. Accordingly, the highest conversion of alkali lignin (79.8%) was obtained with R_IL of 5/1 at 100 °C for 2 h, and phenol monomers (306 mg/g) were selectively produced. The CoILs exhibited good catalytic capacities for oxidative depolymerization of lignin, which strongly depends on the changes in intermolecular interactions and structural organization with varying R_IL.

Review on the preparation of fuels and chemicals based on lignin

Lignin is by far the most abundant natural renewable aromatic polymer in nature, and its reserves are second only to cellulose. In addition to the rich carbon content, the structure of lignin contains functional groups such as benzene rings, methoxyl groups, and phenolic hydroxyl groups. Lignin degradation has become one of the high value, high quality and high efficiency methods to convert lignin, which is of great significance to alleviating the current energy shortage and environmental crisis. This article introduces the hydrolysis methods of lignin in acidic, alkaline, ionic liquids and supercritical fluids, reviews the heating rate, the source of lignin species and the effects of heating rate on the pyrolysis of lignin, and briefly describes the metal catalysis, oxidation methods such as electrochemical degradation and photocatalytic oxidation, and degradation reduction methods using hydrogen and hydrogen supply reagents. The lignin degradation methods for the preparation of fuels and chemicals are systematically summarized. The advantages and disadvantages of different methods, the selectivity under different conditions and the degradation efficiency of different catalytic combination systems are compared. In this paper, a new approach to improve the degradation efficiency is envisioned in order to contribute to the efficient utilization and high value conversion of lignin.

Lignin valorization: Status, challenges and opportunities

As an abundant aromatic biopolymer, lignin has the potential to produce various chemicals, biofuels of interest through biorefinery activities and is expected to benefit the future circular economy. However, lignin valorization is hindered by a series of constraints such as heterogeneous polymeric nature, intrinsic recalcitrance, strong smell, dark colour, challenges in lignocelluloses fractionation and the presence of high bond dissociation enthalpies in its functional groups etc. Nowadays, industrial lignin is mostly combusted for electricity production and the recycling of inorganic compounds involved in the pulping process. Given the research and development on lignin valorization in recent years, important applications such as lignin-based hydrogels, surfactants, three-dimensional printing materials, electrodes and production of fine chemicals have been systematically reviewed. Finally, this review highlights the main constraints affecting industrial lignin valorization, possible solutions and future perspectives, in the light of its abundance and its potential applications reported in the scientific literature.

Simulation and optimization of organosolv based lignocellulosic biomass refinery: A review

Organosolv pretreatment can be considered as the core of the lignocellulosic biomass fractionation within the biorefinery concept. Organosolv facilitates the separation of the major fractions (cellulose, hemicelluloses, lignin), and their use as renewable feedstocks to produce bioenergy, biofuels, and added-value biomass derived chemicals. The efficient separation of these fractions affects the economic feasibility of the biorefinery complex. This review focuses on the simulation of the organosolv pretreatment and the optimization of (i) feedstock delignification, (ii) sugars production (mainly from hemicelluloses), (iii) enzymatic digestibility of the cellulose fraction and (iv) quality of lignin. Simulation is used for the technoeconomic optimization of the biorefinery complex. Simulation and optimization implement a holistic approach considering the efficient technological, economic, and environmental performance of the biorefinery operational units. Consequently, an optimized organosolv stage is the first step for a sustainable, economically viable biorefinery complex in the concept of industrial ecology and zero waste circular economy.

Deconstruction of biomass into lignin oil and platform chemicals over heteropoly acids with carbon-supported palladium as a hybrid catalyst under mild conditions

In this work, near-complete conversion of lignocellulosic biomass and high products yields were achieved through catalytic transfer hydrogenolysis (CTH) in isopropanol using a heteropoly acid SiW₁₂ synergistic with Pd/C catalyst at a relatively mild condition. The performances of various heteropoly acids and catalytic conditions were extensively examined. The results confirmed that SiW₁₂ exhibited the highest activity on disrupting C-C linkages and C-O linkages than H₂WO₄, PW₁₂, and PMo₁₂. 34.91 wt% and 43.55 wt% monophenols were achieved for hydrogenolysis of bagasse and eucalyptus, respectively, at their optimal temperature for 5 h. Characterization studies on the lignin oil revealed that the notable structural changes were observed including the breaking of the side chain alkyl-aryl ether bonds and glycosidic bonds, while methoxyl groups were retained. Additionally, particle size of feedstock also has significant impact on the distribution and yields of the monophenols.

Oxidative valorisation of lignin into valuable phenolics: Effect of acidic and basic catalysts and reaction parameters

The aromatic nature of lignin makes it a good source for the production of numerous platform chemicals. The valorization of lignin into valuable compounds depends upon the type of bonds and functionality present in lignin. Here, we have studied the depolymerization of rice straw alkali lignin in N₂ and O₂ with acidic (ZSM-5), basic (MgO) catalyst and with their mixtures (1:1, 3:7 and 7:3). The effect of hydrogen peroxide on lignin depolymerization was also examined. Maximum yield of bio-oil (50 wt%) was obtained with pure ZSM-5 and 1 ml hydrogen peroxide in nitrogen atmosphere, while maximum conversion (60%) was observed in oxygen environment during the non-catalytic depolymerization of lignin. Bio-oil characterization through GC-MS showed maximum selectivity towards 2-methoxy-4-vinylphenol with 38.5 area% in the bio-oil of ZSM-5-N₂. The bio-oils have also been characterized using ¹H NMR, FT-IR and GC-MS.

Enzymatic conversion of pretreated lignocellulosic biomass: A review on influence of structural changes of lignin

The demands of energy sustainability drive efforts to bio-chemical conversion of biomass into biofuels through pretreatment, enzymatic hydrolysis, and microbial fermentation. Pretreatment leads to significant structural changes of the complex lignin polymer that affect yield and productivity of the enzymatic conversion of lignocellulosic biomass. Structural changes of lignin after pretreatment include functional groups, inter unit linkages and compositions. These changes influence non-productive adsorption of enzyme on lignin through hydrophobic interaction and electrostatic interaction as well as hydrogen bonding. This paper reviews the relationships between structural changes of lignin and enzymatic hydrolysis of pretreated lignocellulosic biomass. The formation of pseudo-lignin during dilute acid pretreatment is revealed, and their negative effect on enzymatic hydrolysis is discussed.