Silver nanoparticles as redox reporters for the amplified electrochemical detection of the single base mismatches

Rapid determination of ampyra in urine samples using dispersive liquid-liquid microextraction coupled with ion mobility spectrometry

Ampyra (AMP, 4-Aminopyridine) is a potassium channel blocker that attracts growing research interest due to its adverse effects at high doses. The fast analysis of AMP is challenging because it typically requires complex analytical techniques. In this research, we developed and validated a novel method to assess the fast and quantitative analysis of AMP from real samples. This method combines the strength of ion mobility spectrometry (IMS) for rapid detection and the dispersive liquid-liquid microextraction as a fast and effective preconcentration method for the preconcentration/extraction of AMP. In this method, Ag nanoparticles were used as modifier agents. Moreover, the proposed mechanism for interaction of AMP with AgNPs was investigated based on the quantum theory of atoms in molecules (QTAIM) analysis. Also, the sensitivity of the proposed method was improved through the application of a delay on the carrier gas flow after sample injection. Under the optimum conditions, the developed method detected AMP in the linear range of 0.4-16 μmol L^-1 with a detection limit of 0.12 µmol L^-1. Finally, the developed method was successfully employed to quantify AMP in urine samples. Method validation was performed by comparing our results with those obtained by HPLC-UV/Vis, confirming the applicability of the proposed method for the AMP analysis in real samples. The proposed method will open up a new door toward developing simple, fast, and effective analytical methods.

Effect of light at different wavelengths on polyol synthesis of silver nanocubes

Despite the presence of light-sensitive species in the polyol synthesis of silver nanocubes, the influence of light on it has yet to be investigated. Herein, we demonstrated that light radiation, by generating plasmon-based hot electrons and subsequently increasing the reduction rate of Ag⁺ in the system, in addition to enhancing the growth rate of nanocubes, causes twinned seeds, which these seeds are then converted into nanorods and right bipyramids. With shorter, higher energy wavelengths, Ag⁺ reduction progresses more quickly, resulting in structures with more twin planes. The overlap of the excitation wavelength and the band gap of Ag₂S clusters formed in the early stages of synthesis accelerates the rate of reaction at low-energy excitation. According to our findings, the surfactant polyvinylpyrrolidone acts as a photochemical relay to drive the growth of silver nanoparticles. Overall, this work emphasizes the impact of excitation light on polyol synthesis as a technique for generating Ag nanocubes of various sizes.

Electroconductive Polyaniline–Ag-ZnO Green Nanocomposite Material

Metal-conducting polyaniline (PANI)-based nanocomposite materials have attracted attention in various applications due to their synergism of electrical, mechanical, and optical properties of the initial components. Herein, metal-PANI nanocomposites, including silver nanoparticle-polyaniline (AgNP-PANI), zinc oxide nanoparticle-polyaniline (ZnONP-PANI), and silver-zinc oxide nanoparticle-polyaniline (Ag–ZnONP-PANI), were prepared using the two processes. Nanocomposite-based electrode platforms were prepared by depositing AgNPs, ZnONPs, or Ag–ZnONPs on a PANI modified glass carbon electrode (GCE) in the presence of 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide/N-Hydroxysuccinimide (EDC/NHS, 1:2) as coupling agents. The incorporation of AgNPs, ZnONPs, and Ag–ZnONPs onto PANI was confirmed by UV-Vis spectrophotometry, which showed five absorbance bands at 216 nm, 412 nm, 464 nm, 550 nm, and 831 nm (i.e., transition of π-π*, π-polaron band transition, polaron-π* electronic transition, and AgNPs). The FTIR characteristic signatures of the nanocomposite materials exhibited stretching arising from C–H aromatic, C–O, and C–N stretching mode for benzenoid rings, and =C–H plane bending vibration formed during protonation. The CV voltammograms of the nanocomposite materials showed a quasi-reversible behavior with increased redox current response. Notably, AgNP–PANI–GCE electrode showed the highest conductivity, which was attributed the high conductivity of silver. The increase in peak currents exhibited by the composites shows that AgNPs and ZnONPs improve the electrical properties of PANI, and they could be potential candidates for electrochemical applications.

Electrochemiluminescent biosensor for ultrasensitive detection of lymphoma at the early stage using CD20 markers as B cell-specific antigens

Herein, by taking advantage of the special binding of an aptamer to the membrane surface of a B cell and accumulation of the positive charges of a nanocomposite, including luminol-chitosan-platinum nanoparticles (L-Cs-Pt NPs), on the negatively charge of the aptamer phosphate backbone, a sensitive, simple, selective and rapid strategy for the detection of lymphoma cells by a new label-free electrogenerated chemiluminescence (ECL) aptasensor has been introduced. With increasing concentrations of B lymphoma cells, the nanocomposite detaches from the aptamer, leading to a decrease in the ECL of a luminol and H₂O₂ system. With high loading of luminol and Pt NPs on a chitosan, together with the electrocatalytic effect of Pt NPs, enhanced sensitive detection of cancer cells with a limit of detection of 31 cells/mL was achieved. Step-by-step modification and biosensor response to cancer cells was monitored by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and ECL. The aptasensor exhibited excellent specificity for lymphoma cells vs breast cancer (MCF-7) and human embryonic kidney (HEK293) cell lines as potential interferents. Finally, the performance of the aptasensor in blood samples was assessed against a commercial flow cytometric method. Satisfactory results confirmed the applicability of the proposed biosensing platform.

Silver or gold? A comparison of nanoparticle modified electrochemical genosensors based on cobalt porphyrin-DNA

We applied a cobalt-porphyrin modified DNA as electrochemical marker, which was attached to nanoparticles, to detect specific DNA sequences. We compare the performance of gold and silver NPs in oligonucleotide sensors to determine if a change in metal will lead to either higher sensitivity or different selectivity, based on the redox behaviour of silver vs. gold. Surprisingly, we find that using either gold or silver NPs yields very similar overall performance. The electrochemical measurements of both types of sensors show the same redox behaviour which is dominated by the cobalt porphyrin, indicating that the electron pathway does not include the NP, but there is direct electron transfer between the porphyrin and the electrode. Both sensors show a linear response in the range of 5 × 10^-17-1 × 10^-16 M; the limit of detection (LOD) is 3.8 × 10^-18 M for the AuNP sensor, and 5.0 × 10^-18 M for the AgNP sensor, respectively, which corresponds to the detection of about 20-50 DNA molecules in the analyte. Overall, the silver system results in a better DNA economy and using cheaper starting materials for the NPs, thus shows better cost-effectivness and could be more suitable for the mass-production of highly sensitive DNA sensors.

Synthesis of silver nanoparticles utilizing various biological systems: mechanisms and applications-a review

The evolving technology of nanoparticle synthesis, especially silver nanoparticle (AgNPs) has already been applied in various fields i.e., electronics, optics, catalysis, food, health and environment. With advancement in research, it is possible to develop nanoparticles of various size, shape, morphology, and surface to volume ratio utilizing biological systems. A number of different agents and methods can be employed to develop choice based AgNPs using algae, plants, fungi and bacteria. The use of plant extracts to produce AgNPs appears to be more convenient, as the method is simple, environmental friendly and inexpensive, also requiring a single-step. The microbial synthesis of AgNps showed intracellular and extracellular mechanisms to reduce metal ions into nanoparticles. Studies have shown that different size (1-100 nm) and shapes (spherical, triangular and hexagonal etc.) of nanoparticles can be produced from various biological routes and these diverse nanoparticles have various functions and usability i.e., agriculture, medical-science, textile, cosmetics and environment protection. The present review provides an overview of various biological systems used for AgNP synthesis, its underlying mechanisms, further highlighting the current research and applications of variable shape and sized AgNPs.

Acetylcholinesterase-catalyzed silver deposition for ultrasensitive electrochemical biosensing of organophosphorus pesticides

This work reports, for the first time, acetylcholinesterase-catalyzed silver deposition for sensitive electrochemical detection of organophosphorus pesticides.

Aligner mediated cleavage of nucleic acids for site-specific detection of single base mismatch

Single base mismatch can always connect with various gene-related diseases, whose determination has aroused widespread interest. So far, various methods have been developed to determine the common base mismatch. However most of them are complex, time-consuming. Herein, we report a novel method, which only need one conventional endonuclease (NEase) and achieve site-specific cleavage in a programmable way, to detect single base mismatch, termed aligner-mediated cleavage-based single base mismatch discrimination (AMCMD). The DNA aligner (DA) is in a stem-loop structure, consistent with an incomplete recognition site of NEase on its stem and a 5'-side arm complementary to the target sequence (TS). Once TS contains matched base and hybridizes with DA, the complete recognition site of NEase is formed, and the TS will be cleavaged with fast speed, while converse is not. Based on it, the method can clearly distinguish mismatched and complementary bases. Without sample pre-processing, we were able to obtain and verify all the test result in about 30 min through the polyacrylamide gel electrophoresis analysis. This endows the proposed method with a simpler advantage. Then we combined AMCMD and EXPAR to create a new method for single base mismatch discrimination, the short sequence obtained by AMCMD as a target to trigger EXPAR, with a detection limit at 1pM level. Another process with human serum underlines that AMCMD is compatible with the complex biological sample, thus it has the potentials for practical applications.

A label-free and highly sensitive DNA biosensor based on the core-shell structured CeO2-NR@Ppy nanocomposite for Salmonella detection

A core-shell cerium oxide nanorod@polypyrrole (CeO₂-NR@Ppy) nanocomposite-based electrochemical DNA biosensor was studied for Salmonella detection. The core-shell CeO₂-NR@Ppy nanocomposite was prepared by in situ chemical oxidative polymerization of pyrrole monomer on CeO₂-NRs, which provided a suitable platform for electrochemical DNA biosensor fabrication. The immobilization of ss-DNA sequences onto nanocomposite-coated microelectrode was performed via covalent attachment method. DNA biosensor electrochemical responses were studied by cyclic voltammetry and electrochemical impedance spectroscopy with [Fe (CN)₆]^3-/4- as redox probe. Under optimal conditions, DNA biosensor response showed good linearity in the range of 0.01-0.4 nM with sensitivity of 593.7 Ω·nM^-1·cm^-2. The low limit of detection and limit of quantification for the DNA biosensor were 0.084 and 0.28 nM, respectively. The proposed DNA biosensor also showed good results when used in detecting actual Salmonella samples.

High-Precision Electrochemical Measurements of the Guanine-, Mismatch-, and Length-Dependence of Electron Transfer from Electrode-Bound DNA Are Consistent with a Contact-Mediated Mechanism

Despite 25 years' effort, serious questions remain regarding the mechanism(s) underlying electron transfer through (or from) electrode-bound double-stranded DNA. In part this is because a control experiment regarding the putatively critical role of guanine bases in the most widely proposed transport mechanism (hopping from guanine to guanine through the π-stack) appears to be lacking from the prior literature. In response, we have employed chronoamperometry, which allows for high-precision determination of electron transfer rates, to characterize transfer to a redox reporter appended onto electrode-bound DNA duplexes. Specifically, we have measured the effects of guanines and base mismatches on the electron transfer rate associated with such constructs. Upon doing so, we find that, counter to prior reports, the transfer rate is, to within relatively tight experimental confidence intervals, unaffected by either. Parallel studies of the dependence of the electron transfer rate on the length of the DNA suggest that transfer from this system obeys a "collision" mechanism in which the redox reporter physically contacts the electrode surface prior to the exchange of electrons.

Approaching single DNA molecule detection with an ultrasensitive electrochemical genosensor based on gold nanoparticles and cobalt-porphyrin DNA conjugates

An ultrasensitive genosensor is obtained by using gold nanoparticles and cobalt-porphyrin labelled DNA reporter strands with an attomolar detection limit.

Carbon nanotubes: a novel material for multifaceted applications in human healthcare

Remarkable advances achieved in modern material technology, especially in device fabrication, have facilitated diverse materials to expand the list of their application fields.

Design of dual working electrodes for concentration process in metalloimmunoassay

Electrochemical immunosensing, particularly through a metalloimmunoassay, is a promising approach for development of point-of-care (POC) diagnostics devices. This study investigated the structure of dual working electrodes (W1 and W2), used in a silver nanoparticles-labeled sandwich-type immunoassay and silver concentration process, paying special attention to the position of W1 relative to W2. The new structures of the dual working electrodes were fabricated for efficient silver concentration and evaluated experimentally, which showed that the duration of prereduction before current measurement decreased from 480 s to 300 s by transforming the position of W1 from 1 line to 2 lines or 6 parts. The experimental results were also compared with numerical simulations based on three-dimensional diffusion, and the prereduction step almost followed the three-dimensional diffusion equation. Using numerical simulations, the ideal structures of dual working electrodes were designed based on relationships between the structures and duration of prereduction or the LOD. In the case of 36 lines at an area ratio of W1 to W1 + W2 of 1 to 10, the prereduction duration decreased to 96 s. The dual working electrodes designed in this study promise to shorten the total analysis time and lower the LOD for POC diagnostics.

Colorimetric determination of melamine in milk using unmodified silver nanoparticles

Melamine is nitrogen rich chemical compound used as an adulterant in dairy products by unscrupulous people to increase the apparent protein content. This incident prompted the researchers to develop simple methods for easy detection of melamine in food samples. In the present paper, we report a simple and sensitive colorimetric method for detection of melamine in milk based on silver nanoparticles. This method relies upon the principle that melamine causes the aggregation of silver nanoparticles, resulting in abrupt color change from yellow to red under optimized conditions. The concentration of melamine in adulterated sample can be quantitated by monitoring the absorption spectra of silver nanoparticles using ultraviolet-visible (UV-Vis) spectrometer. The present colorimetric method which utilizes silver nanoparticles of 35 nm can reliably detect melamine down to a concentration of 0.04 mg l(-1).

Amplified electrochemical genotyping of single-nucleotide polymorphisms using a graphene–gold nanoparticles modified glassy carbon platform

A triple signal amplification strategy for the single nucleotide polymorphisms (SNPs) genotyping is reported using the graphene–gold nanoparticles (GR–AuNPs) as a sensitive platform and monobase-modified silver and gold nanoparticles (M-NPs).

Melamine functionalized silver nanoparticles as the probe for electrochemical sensing of clenbuterol

Clenbuterol, a member of β-agonist family, has now been a serious threat to human health due to its illegal usage in the livestock feeding. Herein, we describe the application of melamine functionalized silver nanoparticles (M-AgNPs) as the electrochemical probe for simple, fast, highly sensitive and selective detection of clenbuterol. Generally, AgNPs are prepared and functionalized by melamine. After interacting with melamine modified gold electrode in the presence of clenbuterol, M-AgNPs can be immobilized on the surface of the electrode via the hydrogen-bonding interactions between clenbuterol and melamine. This sandwich structure permits sensitive and selective detection of clenbuterol. Since M-AgNPs can provide a couple of well-defined sharp silver stripping peaks, which stands for a highly characteristic solid-state Ag/AgCl reaction, a rather low detection limit of 10 pM can be achieved. The detection range is from 10 pM to 100 nM, which is quite wide. This developed biosensor can potentially be used for clenbuterol detection in biological fluids in the presence of various interferences.

Dual amplification of single nucleotide polymorphism detection using graphene oxide and nanoporous gold electrode platform

In the present manuscript, a strategy to prompt the sensitivity of a biosensor based on the dual amplification of signal by applying a nanoporous gold electrode (NPGE) as a support platform and soluble graphene oxide (GO) as an indicator has been developed.

Discriminating DNA mismatches by electrochemical and gravimetric techniques

A silicon nitride functionalized electrode and a 104 MHz lithium tantalate (LiTaO₃) surface acoustic wave (SAW) sensor have been used to investigate target-probe recognition processes. Electrochemical and gravimetric measurements have been considered to monitor hybridization of single base mismatch (SBM) in synthetic oligonucleotides and single-nucleotide polymorphisms ApoE in real clinical genotypes. Obvious discrimination of SBM in nucleotides has been shown by both gravimetric and electrochemical techniques, without labeling nor amplification. Investigations on mismatches nature and position have also been considered. For guanine-adenine (GA), guanine-thymine (GT) and guanine-guanine (GG) mismatches, the sensors responses present a dependence upon positions. Considering the capacitance variations and hybridization rates, results showed that gravimetric transduction is more sensitive than electrochemical one. Moreover, the highest value of GT hybridization rate (in the middle position) was found in accordance with the nearest-neighbor model, where the considered configuration appears as the most thermodynamically stable. For the real samples, where the electrochemical transduction, by combining capacitance and flat-band potential measurements, were found more sensitive, the results show that the realized sensor permits an unambiguous discrimination of recognition between fully complementary, non-complementary and single base mismatched targets, and even between the combination of differently matched strands.

Nanoporous gold electrode as a platform for the construction of an electrochemical DNA hybridization biosensor

The application of a nanoporous gold electrode (NPGE) in the fabrication of an electrochemical sensing system for the detection of single base mismatches (SBMs) using ferrocene-modified DNA probe has been investigated in the present manuscript. Ferrocene carboxylic acid is covalently attached to the amino-modified probe using EDC/NHS chemistry. By covalent attachment of the redox reporter molecules on the top of DNA, the direct oxidation of the ferrocene on the electrode surface is avoided. On the other hand, the electrochemical signals are amplified by anodizing the electrode surface and converting it to nanoporous form. By improving the sensitivity of the biosensor, the different SBMs including the thermodynamically stable G-A and G-T mismatches, can be easily distinguished. In this research, NPGE was prepared by anodization and chemical reduction of Au surface and used for signal amplification. Nanoporous electrode enhances the sensitivity of DNA biosensor and makes it capable to detect complementary target DNA in sub-nanomole scales.

Aptamer-conjugated silver nanoparticles for electrochemical detection of adenosine triphosphate

The capability of silver nanoparticles (SNP) as redox tag in the construction of an electrochemical aptasensor for the detection of adenosine triphosphate (ATP) is investigated in the present manuscript. To construct the aptasensor, a well-known ATP binding aptamer (ABA) splits into two segments. The first amino-labeled segment of the aptamer was covalently immobilized on 3-mercaptopropionic acid modified gold electrode surface by the formation of carbodiimide bond. The second segment was modified by SNPs and associated with the first segment in the presence of ATP. The direct oxidation signal of SNPs is followed as the analytical signal to detect ATP. The sandwich assay shows a suitable signal gain and importantly, a good response time. The sensor can detect the concentrations of ATP as low as micromolar scales with a desirable stability under optimum conditions. Furthermore, analog nucleotides including GTP, UTP and CTP, do not show serious interferences and this sensor readily detects its target in a complex media such as human blood plasma.