Amplified electrochemical hydrogen peroxide reduction based on hemin/G-quadruplex DNAzyme as electrocatalyst at gold particles modified heated copper disk electrode

Heating promoted super sensitive electrochemical detection of p53 gene based on alkaline phosphatase and nicking endonuclease Nt.BstNBI-assisted target recycling amplification strategy at heated gold disk electrode

An ultrasensitive electrochemical biosensor for detecting p53 gene was fabricated based on heated gold disk electrode coupling with endonuclease Nt.BstNBI-assisted target recycle amplification and alkaline phosphatase (ALP)-based electrocatalytic signal amplification. For biosensor assembling, biotinylated ssDNA capture probes were first immobilized on heated Au disk electrode (HAuDE), then combined with streptavidin-alkaline phosphatase (SA-ALP) by biotin-SA interaction. ALP could catalyze the hydrolysis of ascorbic acid 2-phosphate (AAP) to produce ascorbic acid (AA). While AA could induce the redox cycling to generate electrocatalytic oxidation current in the presence of ferrocene methanol (FcM). When capture probes hybridized with p53, Nt.BstNBI would recognize and cleave the duplexes and p53 was released for recycling. Meanwhile, the biotin group dropt from the electrode surface and subsequently SA-ALP could not adhere to the electrode. The signal difference before and after cleavage was proportional to the p53 gene concentration. Furthermore, with electrode temperature elevated, the Nt.BstNBI and ALP activities could be increased, greatly improving the sensitivity and efficiency for p53 detection. A detection limit of 9.5 × 10^-17 M could be obtained (S/N = 3) with an electrode temperature of 40 °C, ca. four magnitudes lower than that at 25 °C.

Plasmonic Au nanocube enhanced SERS biosensor based on heated electrode and strand displacement amplification for highly sensitive detection of Dam methyltransferase activity

In this work, a novel "turn-on" mode Au nanocubes (AuNCs) enhanced surface-enhanced Raman scattering (SERS) biosensing platform coupled with heated Au electrode (HAuE) and strand displacement amplification (SDA) strategy was proposed for highly sensitive detection of DNA adenine methylation (Dam) Methyltransferase (MTase) activity. The Dam MTase and DpnI enzyme activities were significantly increased by elevating the HAuE surface temperature, resulting in the rapid production of template DNA for later SDA. During the SDA process, the released single-stranded DNA (ssDNA) could be amplified exponentially, and its concentration was positively related to the Dam MTase activity. The plasmonic AuNCs in SERS tags could provide significant SERS enhancement due to their "lightning rod" effect resulting from the sharp feature of the edges and corners of AuNCs. Because of these factors, the proposed biosensors exhibited high sensitivity in detecting the Dam MTase activity. The limit of detection was estimated to be 8.65 × 10^-5 U mL^-1, which was lower than that in most of the sensors for detection of Dam MTase activity in the literature. This SERS biosensor could also be used to screen inhibitors of Dam MTase and had the potential for detecting Dam MTase activity in real biological samples.

Amplified Electrochemical Hydrogen Peroxide Sensing Based on Cu-Porphyrin Metal-Organic Framework Nanofilm and G-Quadruplex-Hemin DNAzyme

A novel electrochemical hydrogen peroxide (H₂O₂) sensor based on Cu-porphyrin(Cu-TCPP)/G-quadruplex-hemin nanocomposite was constructed by assembling two-dimensional Cu-TCPP metal-organic framework (MOF) nanofilm and G-quadruplex-hemin DNAzyme. The Cu-TCPP synthesized by the surfactant-assisted method has a wrinkled two-dimensional nanofilm morphology, which gives it a large surface area and accessible active sites. Cu-TCPP exhibits peroxidase activity and good stability and can catalyze the reduction of H₂O₂. In addition, Cu-TCPP can be used as a nanocarrier for G-quadruplex-hemin DNAzyme with strong peroxidase activity to achieve "biological barcode" amplification and improve stability. The cooperative interaction of Cu-TCPP and G-quadruplex-hemin DNAzyme effectively amplifies the electrochemical response signal. Electrochemical studies have shown that the constructed sensor exhibits good electrochemical sensing performance with three linear ranges: 0.08 μM to 0.11 mM, 0.11-0.91 mM, and 0.91-8.1 mM, with sensitivities of 2315.86, 301.00, and 65.71 μA/(mM cm²), respectively, and the detection limit was 0.03 μM. In addition, the sensor shows good selectivity. In summary, this study provides a simple and effective new strategy for electrochemical sensing based on two-dimensional MOFs and artificial enzymes.

Sensitive Electrochemical Detection of Tryptophan Using a Hemin/G-Quadruplex Aptasensor

In this study, we design an electrochemical aptasensor with an enzyme-free amplification method to detect tryptophan (Trp). For the amplified electrochemical signal, the screen-printed electrode was modified with dendritic gold nanostructures (DGNs)/magnetic double-charged diazoniabicyclo [2.2.2] octane dichloride silica hybrid (Fe3O4@SiO2/DABCO) to increase the surface area as well as electrical conductivity, and the hemin/G-quadruplex aptamer was immobilized. The presence of Trp improved the catalytic characteristic of hemin/G-quadruplex structure, which resulted in the efficient catalysis of the H2O2 reduction. As the concentration of Trp increased, the intensity of H2O2 reduction signal increased, and Trp was measured in the range of 0.007–200 nM with a detection limit of 0.002 nM. Compared with previous models, our sensor displayed higher detection sensitivity and specificity for Trp. Furthermore, we demonstrated that the proposed aptasensor successfully determined Trp in human serum samples, thereby proving its practical applicability.

DNAzyme–gold nanoparticle-based probes for biosensing and bioimaging

The design and applications of DNAzyme–gold nanoparticle-based probes in biosensing and bioimaging are summarized here.

Temperature controllable electrochemical sensors based on horseradish peroxidase as electrocatalyst at heated Au disk electrode and its preliminary application for H2O2 detection

In this paper, horseradish peroxidase (HRP) was successfully immobilized on heated Au disk electrode (HAuDE) by biotin-streptavidin specific interaction through HS-ssDNA-biotin self-assembled on HAuDE for investigation the electrocatalytic activity of HRP. With elevated electrode temperature, the significant temperature effect of the electrocatalytic activity of HRP for H₂O₂ reduction was demonstrated by using this bio-sensing platform. With an electrode temperature of 40 °C, a detection limit of 1.5 × 10^-6 mol L^-1 for H₂O₂ reduction could be obtained, which was more than one magnitude lower than that with an electrode temperature of 0 °C. Because HRP can be widely used as an enzyme label for amplification detection, this sensing platform can be broadly applied to analytical chemistry such as nucleic acid detection, and aptamer-based biosensors.

Fabrication of Electrochemical-Based Bioelectronic Device and Biosensor Composed of Biomaterial-Nanomaterial Hybrid

The field of bioelectronics has paved the way for the development of biochips, biomedical devices, biosensors and biocomputation devices. Various biosensors and biomedical devices have been developed to commercialize laboratory products and transform them into industry products in the clinical, pharmaceutical, environmental fields. Recently, the electrochemical bioelectronic devices that mimicked the functionality of living organisms in nature were applied to the use of bioelectronics device and biosensors. In particular, the electrochemical-based bioelectronic devices and biosensors composed of biomolecule-nanoparticle hybrids have been proposed to generate new functionality as alternatives to silicon-based electronic computation devices, such as information storage, process, computations and detection. In this chapter, we described the recent progress of bioelectronic devices and biosensors based on biomaterial-nanomaterial hybrid.

Temperature-Controllable Electrodes with a One-Parameter Calibration

Electrically heated electrodes have been applied for various chemical and biological sensors. However, previous electrically heated electrodes, including microwires and microdiscs, are usually small and often suffer from the requirement of frequent calibrations of the electrode surface temperature ( T_s) at different environment temperatures. Here, we fabricate a temperature-controllable disk electrode (TCDE) with a conventional size (3-5 mm in diameter). A one-parameter temperature calibration is proposed using a temperature transfer coefficient α and a structural model ( T_s = T_e + α ( T_h - T_e)) to estimate T_s ( T_h and T_e are the temperature of the heating element and environment, respectively). The value of α is unique for a TCDE and mainly dependent on the structure and materials of the electrodes and the solution in nature. Once α is experimentally determined, T_s can be calibrated and found to be applicable to wide fluctuations in room temperature (15.0-33.0 °C) with errors below 1.5% for three types of disk electrodes (gold, glassy carbon, and platinum). The required T_s can be obtained by just setting T_h without thermal characterization between the heating power and T_s. A simple relationship for exploring the dependence of α on the height ( H) and radius ( R) of the electrode materials and other constants ( a, b, c, and R₀), α = 1 - c - aH - b ( R - R₀)², is revealed by numerical simulations (COMSOL). The impact of the radii of both the insulating materials of the electrode and the electrochemical cells on T_s is also considered. The effect of the solution thermal conductivity on α is studied. TCDEs are expected to be used as a sensor platform with enhanced performance.

A chemiluminescence biosensor for the detection of thrombin based on the aptamer composites

An efficient, rapid, simple and ultrasensitive chemiluminescence (CL) approach was proposed for thrombin detection based on the aptamer-thrombin recognition. The aptamer composites were synthesized in this work using graphene oxide (GO) as the backing material. The thrombin was adsorbed on the aptamer composites based on the aptamer-thrombin recognition. Thus, thrombin could be quantified by the difference value of the CL intensity between supernate of the sample and the mixture which composed of thrombin and coexisted substances. The CL intensity exhibits a stable response to thrombin over a concentration range from 2.5×10^-10 to 1×10^-9mol·L^-1 with a detection limit as low as 8.3×10^-11mol·L^-1, the relative standard deviation (RSD) was found to be 4.9% for 11 determinations of 1.25×10^-9mol·L^-1 thrombin. Finally, the applicability of the method was verified by applying to serum samples. The recoveries were in the range of 90.3-101.0% with RSD of 2.6-3.2%.

Integration of thermocouple microelectrode in the scanning electrochemical microscope at variable temperatures: simultaneous temperature and electrochemical imaging and its kinetic studies

We describe herein a method for the simultaneous measurement of temperature and electrochemical signal with a new type of thermocouple microelectrode. The thermocouple microelectrode can be used not only as a thermometer but also as a scanning electrochemical microscope (SECM) tip in the reaction between tip-generated bromine and a heated Cu sample. The influence of temperature on the SECM imaging process and the related kinetic parameters have been studied, such as kinetic constant and activation energy.

Application of iridium(III) complex in label-free and non-enzymatic electrochemical detection of hydrogen peroxide based on a novel "on-off-on" switch platform

We herein report a label-free and non-enzymatic electrochemical sensor for the highly sensitive detection of hydrogen peroxide (H2O2) based on a novel "on-off-on" switch system. In our design, MB was used as an electron mediator to accelerate the electron transfer while AuNPs was used to amplify the electrochemical signal due to its excellent biocompatibility and good conductivity. The "switch-off" state was achieved by introducing the guanine-rich capture probe (CP) and an iridium complex onto the electrode surface to form a hydrophobic layer, which then hinders electron transfer. Upon addition of H2O2, fenton reaction occurs and produces OH• in the presence of Fe(2+). The OH• cleaves the CP into DNA fragments, thus resulting in the release of CP and iridium complex from the sensing interface, recovering the electrochemical signal to generate a "switch-on" state. Based on this novel switch system, a detection limit as low as 3.2 pM can be achieved for H2O2 detection. Moreover, satisfactory results were obtained by using this method for the detection of H2O2 in sterilized milk. To the best of our knowledge, this is the first G-quadruplex-based electrochemical sensor using an iridium(III) complex.