Use of liposomal amplifiers in total internal reflection fluorescence fiber-optic biosensors for protein detection

Recent developments of (bio)-sensors for detection of main microbiological and non-biological pollutants in plastic bottled water samples: A critical review

The importance of water in all biological processes is undeniable. Ensuring access to clean and safe drinking water is crucial for maintaining sustainable water resources. To elaborate, the consumption of water of inadequate quality can have a repercussion on human health. Furthermore, according to the instability of tap water quality, the consumption rate of bottled water is increasing every day at the global level. Although most people believe bottled water is safe, it can also be contaminated by microbiological or chemical pollution, which can increase the risk of disease. Over the last decades, several conventional analytical tools applied to analyze the contamination of bottled water. On the other hand, some limitations restrict their application in this field. Therefore, biosensors, as emerging analytical method, attract tremendous attention for detection both microbial and chemical contamination of bottled water. Biosensors enjoy several facilities including selectivity, affordability, and sensitivity. In this review, the developed biosensors for analyzing contamination of bottled water were highlighted, as along with working strategies, pros and cons of studies. Challenges and prospects were also examined.

Sandwich method-based sensitivity enhancement of Ω-shaped fiber optic LSPR for time-flexible bacterial detection

The development of rapid and sensitive detection methods for pathogenic bacteria is crucial for the therapy and prevention of related diseases. However, the rapid and ultrasensitive assays are difficult to be realized simultaneously. To solve the problem, a sandwich method based on Ω-shaped fiber optic localized surface resonance (Ω-FOLSPR) was constructed, where poly adenine-tailed aptamer (PolyA-apt) and SH modified gold nanoparticles tags (AuNPs tags) were chosen as the capturing aptamer and amplifying tags, respectively. The small AuNPs were modified on the surface of fiber-optic (FO) rapidly, which saved the preparation time. Then, the PolyA-apt was modified on the AuNPs surface to capture the bacteria effectively due to its ability to adjust the density and conformation of aptamer on the AuNPs surface. Finally, the large AuNPs tags were used to generate intense signal enhancement. It is found that the sandwich method enables the unique characteristic of a time-dependent sensitivity enhancement. Specifically, the LOD of 108.0 CFU/mL and 7.4 CFU/mL was achieved with the analysis time of 10 min and 100 min, respectively. Besides, the Ω-FOLSPR sensor exhibits excellent selectivity against the other bacteria and good performance for detecting the spiked and natural samples. This sandwich method provides a time-flexible strategy due to the combination of effective signal amplification and real-time analysis for bacterial detection, displaying great potential for practical bacterial detection.

Fluorescent and electrochemical dual-mode detection of Chikungunya virus E1 protein using fluorophore-embedded and redox probe-encapsulated liposomes

The critical goal of sensitive virus detection should apply in the early stage of infection, which may increase the probable survival rate. To achieve the low detection limit for the early stage where a small number of viruses are present in the sample, proper amplified signals from a sensor can make readable and reliable detection. In this work, a new model of fluorescent and electrochemical dual-mode detection system has been developed to detect virus, taking recombinant Chikungunya virus E1 protein (CHIK-VP) as an example. The hydrophobic quantum dots (QDs) embedded in the lipid bilayer of liposome and methylene blue (MB) encapsulated in the inner core of liposomes played a role of dual-signaling modulator. After CHIK-VP addition, the nanocomposites and APTES-coated Fe₃O₄ nanoparticles (Fe₃O₄ NPs) were conjugated with antibodies to form a sandwich structure and separated from the medium magnetically. The nanoconjugates have been burst out by chloroform as surfactant, and both the QDs and MB are released from the liposome and were then monitored through changes in the fluorescence and electrochemical signals, respectively. These two fluorometric and electrochemical signals alteration quantified the CHIK-VP in the range of femtogram to nanogram per milliliter level with a LOD of 32 fg mL⁻¹, making this liposomal system a potential matrix in a virus detection platform.

Simple and Cost-effective Enzymatic Detection of Cholesterol Using Flow Injection Analysis

A flow-injection analytical (FIA) system was developed for the determination of cholesterol concentrations based on enzymatic reactions that occurred in a cholesterol oxidase (CHO_x)-immobilized, fused-silica capillary followed by electrochemical detection. The production of hydrogen peroxide from cholesterol in an enzymatic reaction catalyzed by CHO_x was subsequently oxidized electrochemically at an electrode. Our FlA system demonstrated its cost-effectiveness and utility at an applied potential of 0.6 V (vs. Ag/AgCl), a flow rate of 100 μL/min and, under optimal conditions, the resulting signal demonstrated a linear dynamic range from 50 μM to 1.0 mM with a limit of detection (LOD) of 12.4 μM, limit of quantification (LOQ) of 44.9 μM, and the coefficient of variation of 5.17%. In addition, validation of our proposed system using a reference HDL-cholesterol kit used for clinical diagnosis suggested our FIA system was comparable to commercial kits for the determination of the cholesterol incorporation amount in various aqueous liposomal suspensions. These good analytical features achieved by FIA could make the implementation of this methodology possible for on-line monitoring of cholesterol in various types of samples.

Use of Target-Specific Liposome and Magnetic Nanoparticle Conjugation for the Amplified Detection of Norovirus

Viral diseases are one of the most life-threatening diseases as they can erupt unpredictably and spread rapidly in any medium with a very small number of particles. Therefore, the key for lethal virus detection should be highly sensitive in the early-stage detection, which can help increase the chance of survival. Amplification of the detecting signal is one of the most promising mechanisms for the detection of low-concentration analytes. A proper amplification can develop such a kind of system where a small number of particles can produce intense signals for a prominent detection. Keeping this in mind, in this report, we have presented a fluorometric method to detect norovirus (NoV) by a newly developed fluorophore-labeled liposome and a magnetically modified Fe₃O₄ combined system. Homogeneously distributed amine-functionalized liposomes have been constructed filled with a strong fluorophore of calcein. Simultaneously, (3-aminopropyl)-triethoxysilane (APTES)-functionalized Fe₃O₄ nanoparticles are also synthesized by the standard silanization process, and these two separately synthesized nanoparticles were functionalized with an antibody to achieve specificity. The Fe₃O₄ and calcein-liposome system has been applied for NoV detection, which was magnetically separated from the analyte medium and then externally burst to release the fluorophores from the core of the liposome. The easiness, rapidity, and sensitivity in a wide linear range can offer a huge potential of this method in point-of-care diagnostics.

Recent Progress in Optical Sensors for Biomedical Diagnostics

In recent years, several types of optical sensors have been probed for their aptitude in healthcare biosensing, making their applications in biomedical diagnostics a rapidly evolving subject. Optical sensors show versatility amongst different receptor types and even permit the integration of different detection mechanisms. Such conjugated sensing platforms facilitate the exploitation of their neoteric synergistic characteristics for sensor fabrication. This paper covers nearly 250 research articles since 2016 representing the emerging interest in rapid, reproducible and ultrasensitive assays in clinical analysis. Therefore, we present an elaborate review of biomedical diagnostics with the help of optical sensors working on varied principles such as surface plasmon resonance, localised surface plasmon resonance, evanescent wave fluorescence, bioluminescence and several others. These sensors are capable of investigating toxins, proteins, pathogens, disease biomarkers and whole cells in varied sensing media ranging from water to buffer to more complex environments such as serum, blood or urine. Hence, the recent trends discussed in this review hold enormous potential for the widespread use of optical sensors in early-stage disease prediction and point-of-care testing devices.

Fluorescent immunoliposomal nanovesicles for rapid multi-well immuno-biosensing of histamine in fish samples

Scombroid poisoning in fish-based and other food products has raised concerns due to toxicity outbreaks and incidences associated with histamine, thus measuring the amount of histamine toxic molecule is considered crucial quality indicator of food safety and human health. In this study, liposome-based measurement of histamine was performed via rupturing mechanism of sulforhodamine B dye encapsulated anti-histamine antibody conjugated liposomal nanovesicles. The immunosensing ability of immuno-liposomal format was assessed by monitoring the fluorescence at excitation/emission wavelength of 550/585 nm. Immuno-liposomal format assays were considered, one based on single wash procedure (Method 1), which had a detection limit of 10 ppb and quantification limit 15-80 ppb. While Method 2 based on one-by-one wash procedure had a detection limit of 2-3 ppb and quantification limit 8.5 ppb-200 ppm that required 2 h 30 min to perform. In view of better quantification limit, Method 2 was chosen for further tests required to validate its applicability in real samples. The feasibility of Method 2 was reconfirmed in fresh mackerel fish, and canned fish (tuna and salmon) with a similar detection limits but with low amplified fluorescence signals and sufficient levels of histamine recovery from fresh mackerel (73.50-99.98%), canned tuna (79.08-103.74%) and salmon (74.56-99.02%). The specificity and method accuracy were expressed as % CV in the range 5.34%-8.48%. Overall, the developed multi-well sensing system (Method 2) showed satisfactory specificity, cost effectiveness, rapidity, and stability for monitoring histamine toxicity as a practical food diagnostic device.

Tethering functionality to lipid interfaces by a fast, simple and controllable post synthesis method

HYPOTHESIS

Liposomes require careful control of the surface design to ensure colloidal stability in complex matrices and target-specific binding to desired receptor units. Ideally, surface functionalization should be smart and controllable in terms of composition which is seldomly achieved by conventional methods. Therefore, a new strategy (insertion method) was developed and compared to the standard method (modification post-synthesis) using the model receptor biotin.

EXPERIMENTS

Dipalmitoylphosphatidylethanolamine-biotin (DPPE-biotin) was used in both procedures, lipopeptide-biotin and cholesterol-biotin were tested additionally for insertion into the intact lipid bilayer. The insertion method was optimized regarding incubation time, temperature and vesicle stability. The biotinylated vesicles of both functionalization methods were characterized with respect to their size, ζ-potential and binding functionality.

FINDINGS

Standard incorporation resulted in large variations in insertion-efficiency, high batch-to-batch differences, and an incorporation limit of 4 mol%. Best results were obtained through effortless insertion of the lipopeptide-biotin at room temperature. The concentration-controlled functionalization of liposomes (up to 10 mol%) could easily be monitored by the ζ-potential, resulted in reliable, quantitative binding to streptavidin and did not affect the analytical properties of the nanomaterial. This offers the possibility for a general modification strategy for lipid-based nanomaterials ideal for assay optimizations or multi-analyte detection.

Development of dual-color total internal reflection fluorescence biosensor for simultaneous quantitation of two small molecules and their affinity constants with antibodies

A novel dual-color total internal reflection fluorescence biosensor (DTB) was successfully developed for the simultaneous detection of two small molecules based on a simple optical structure and the time resolved effect of fiber optic switch. The DTB employed a single-multi mode fiber optic coupler instead of a sophisticated confocal optical system for the transmission of two excitation lights and dual-color fluorescence, and a photodiode detector instead of photomultiplier for the simultaneous detection of dual-color fluorescence. The compact optical design of DTB improved its optical transmission efficiency and detection sensitivity because of no requirement of numerous optical separation elements and rigorous optical alignment. The DTB was applied for the simultaneous detection of 2,4-Bisphenol-A (BPA) and 2,4-Dichlorophenoxyacetic acid (2,4-D) using one bifunctional fiber optic bio-probe modified by two hapten-protein conjugates. When the mixture of Cy5.5 labeled anti-2,4-D antibody and Pacific Blue dye labeled anti-BPA antibody was introduced over the surface of the bio-probe, they bound with their respective hapten-protein conjugate immobilized onto the bio-probe. Based on the time-resolved effect of fiber optic switch, two fluorescence dyes were alternatively excited by 635 nm and 405 nm laser lights and simultaneously detected by one photodiode detector. Taking indirect competitive immunoassay principle, BPA and 2,4-D were simultaneously detected using the DTB with high sensitivity, accuracy, and rapidity. The quantitation of affinity constants between small molecules and their antibodies was also achieved based on the proposed theory. The DTB provides a flexible and powerful platform for simultaneously sensitive quantitation of multiple targets and the affinity constants of biomolecular interactions.

A Fluorescent Biosensors for Detection Vital Body Fluids' Agents

The clinical applications of sensing tools (i.e., biosensors) for the monitoring of physiologically important analytes are very common. Nowadays, the biosensors are being increasingly used to detect physiologically important analytes in real biological samples (i.e., blood, plasma, urine, and saliva). This review focuses on biosensors that can be applied to continuous, time-resolved measurements with fluorescence. The material presents the fluorescent biosensors for the detection of neurotransmitters, hormones, and other human metabolites as glucose, lactate or uric acid. The construction of microfluidic devices based on fluorescence uses a variety of materials, fluorescent dyes, types of detectors, excitation sources, optical filters, and geometrical systems. Due to their small size, these devices can perform a full analysis. Microfluidics-based technologies have shown promising applications in several of the main laboratory techniques, including blood chemistries, immunoassays, nucleic-acid amplification tests. Of the all technologies that are used to manufacture microfluidic systems, the LTCC technique seems to be an interesting alternative. It allows easy integration of electronic and microfluidic components on a single ceramic substrate. Moreover, the LTCC material is biologically and chemically inert, and is resistant to high temperature and pressure. The combination of all these features makes the LTCC technology particularly useful for implementation of fluorescence-based detection in the ceramic microfluidic systems.

Antimicrobial Peptides: Powerful Biorecognition Elements to Detect Bacteria in Biosensing Technologies

Bacterial infections represent a serious threat in modern medicine. In particular, biofilm treatment in clinical settings is challenging, as biofilms are very resistant to conventional antibiotic therapy and may spread infecting other tissues. To address this problem, biosensing technologies are emerging as a powerful solution to detect and identify bacterial pathogens at the very early stages of the infection, thus allowing rapid and effective treatments before biofilms are formed. Biosensors typically consist of two main parts, a biorecognition moiety that interacts with the target (i.e., bacteria) and a platform that transduces such interaction into a measurable signal. This review will focus on the development of impedimetric biosensors using antimicrobial peptides (AMPs) as biorecognition elements. AMPs belong to the innate immune system of living organisms and are very effective in interacting with bacterial membranes. They offer unique advantages compared to other classical bioreceptor molecules such as enzymes or antibodies. Moreover, impedance-based sensors allow the development of label-free, rapid, sensitive, specific and cost-effective sensing platforms. In summary, AMPs and impedimetric transducers combine excellent properties to produce robust biosensors for the early detection of bacterial infections.

Nano-materials for use in sensing of salmonella infections: Recent advances

Salmonella infectious diseases spreading every day through food have become a life-threatening problem for millions of people and growing menace to society. Health expert's estimate that the yearly cost of all the food borne diseases is approximately $5-6 billion. Traditional methodologies for salmonella analysis provide high reliability and very low limits of detection. Among them immunoassays and Nucleic acid-based assays provide results within 24h, but they are expensive, tedious and time consuming. So, there is an urgent need for development of rapid, robust and cost-effective alternative technologies for real-time monitoring of salmonella. Several biosensors have been designed and commercialized for detection of this pathogen in food and water. In this overview, we have updated the literature concerning novel biosensing methods such as various optical and electrochemical biosensors and newly developed nano- and micro-scaled and aptamers based biosensors for detection of salmonella pathogen. Furthermore, attention has been focused on the principal concepts, applications, and examples that have been achieved up to diagnose salmonella. In addition, commercial biosensors and foreseeable future trends for onsite detecting salmonella have been summarized.