Modifying the N-terminus of polyamides: PyImPyIm has improved sequence specificity over f-ImPyIm

DNA-Binding Properties of New Fluorescent AzaHx Amides: Methoxypyridylazabenzimidazolepyrroleimidazole/pyrrole

DNA minor groove binding polyamides have been extensively developed to control abnormal gene expression. The establishment of novel, inherently fluorescent 2-(p-anisyl)benzimidazole (Hx) amides has provided an alternative path for studying DNA binding in cells by direct observation of cell localization. Because of the 2:1 antiparallel stacking homodimer binding mode of these molecules to DNA, modification of Hx amides to 2-(p-anisyl)-4-azabenzimidazole (AzaHx) amides has successfully extended the DNA-recognition repertoire from central CG [recognized by Hx-I (I=N-methylimidazole)] to central GC [recognized by AzaHx-P (P=N-methylpyrrole)] recognition. For potential targeting of two consecutive GG bases, modification of the AzaHx moiety to 2- and 3-pyridyl-aza-benzimidazole (Pyr-AzaHx) moieties was explored. The newly designed molecules are also small-sized, fluorescent amides with the Pyr-AzaHx moiety connected to two conventional five-membered heterocycles. Complementary biophysical methods were performed to investigate the DNA-binding properties of these molecules. The results showed that neither 3-Pyr-AzaHx nor 2-Pyr-AzaHx was able to mimic I-I=N-methylimidazole-N-methylimidazole to target GG dinucleotides specifically. Rather, 3-Pyr-AzaHx was found to function like AzaHx, f-I (f=formamide), or P-I as an antiparallel stacked dimer. 3-Pyr-AzaHx-PI (2) binds 5'-ACGCGT'-3' with improved binding affinity and high sequence specificity in comparison to its parent molecule AzaHx-PI (1). However, 2-Pyr-AzaHx is detrimental to DNA binding because of an unfavorable steric clash upon stacking in the minor groove.

AzaHx, a novel fluorescent, DNA minor groove and G·C recognition element: Synthesis and DNA binding properties of a p-anisyl-4-aza-benzimidazole-pyrrole-imidazole (azaHx-PI) polyamide

The design, synthesis, and DNA binding properties of azaHx-PI or p-anisyl-4-aza-benzimidazole-pyrrole-imidazole (5) are described. AzaHx, 2-(p-anisyl)-4-aza-benzimidazole-5-carboxamide, is a novel, fluorescent DNA recognition element, derived from Hoechst 33258 to recognize G·C base pairs. Supported by theoretical data, the results from DNase I footprinting, CD, ΔT(M), and SPR studies provided evidence that an azaHx/IP pairing, formed from antiparallel stacking of two azaHx-PI molecules in a side-by-side manner in the minor groove, selectively recognized a C-G doublet. AzaHx-PI was found to target 5'-ACGCGT-3', the Mlu1 Cell Cycle Box (MCB) promoter sequence with specificity and significant affinity (K(eq) 4.0±0.2×10(7) M(-1)).

Enthalpy-driven nuclease-like activity and mechanism of peptide-chlorambucil conjugates

We report the results of attaching the anticancer drug chlorambucil (CLB) to two high-affinity DNA binding peptides: Met-Hyp-Arg-Lys-(Py)4-Lys-Arg-NH2 (HyM-10) and Gln-Hyp-Arg-Lys-(Py)4-Lys-Arg-NH2 (HyQ-10). These CLB-peptide conjugates cleave DNA very effectively and sequence-selectively without the use of chemicals, heat, or UV irradiation. Polyacrylamide gel electrophoresis identifies the sites where CLB-HyM-10 and CLB-HyQ-10 attack a complementary pair of 5'-(32)P-labeled duplexes derived from pBR322 in the absence of piperidine or other chemical additives. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) has confirmed the preferential cleavage sites as well as a novel stepwise cleavage mechanism of sequence-selective DNA cleavage. Resembling restriction endonucleases, the CLB-peptide conjugates appear to be capable of producing double strand DNA breaks. Circular dichroism studies show that CLB-HyM-10 and CLB-HyQ-10 induce significant local conformational changes in DNA via the minor groove, possibly with dimeric binding stoichiometry. The energetic basis of DNA binding by these conjugates has been investigated by isothermal titration calorimetry, revealing that the binding of both the peptides and their CLB conjugates is overwhelmingly enthalpy-driven. The maintenance of a conserved negative binding free energy in DNA-conjugate interactions is a crucial feature of the universal enthalpy-entropy compensation phenomenon. The strongly enthalpy-driven binding of CLB-peptide conjugates to preferred loci in DNA furnishes the required proximity effect to generate the observed nuclease-like sequence-selective cleavage.

Design, synthesis, and DNA binding characteristics of a group of orthogonally positioned diamino, N-formamido, pyrrole- and imidazole-containing polyamides

Orthogonally positioned diamino/dicationic polyamides (PAs) have good water solubility and enhanced binding affinity, whilst retaining DNA minor groove and sequence specificity compared to their monoamino/monocationic counterparts. The synthesis and DNA binding properties of the following diamino PAs: f-IPI (3a), f-IPP (4), f-PIP (5), and f-PPP (6) are described. P denotes the site where a 1-propylamino group is attached to the N1-position of the heterocycle. Binding of the diamino PAs to DNA was assessed by DNase I footprinting, thermal denaturation, circular dichroism titration, biosensor surface plasmon resonance (SPR), and isothermal titration calorimetry (ITC) studies. According to SPR studies, f-IPI (3a) bound more strongly (K(eq)=2.4×10(8) M(-1)) and with comparable sequence selectivity to its cognate sequence 5'-ACGCGT-3' when compared to its monoamino analog f-IPI (1). The binding of f-IPI (3a) to 5'-ACGCGT-3' via the stacked dimer motif was balanced between enthalpy and entropy, and that was quite different from the enthalpy-driven binding of its monoamino parent f-IPI (1). f-IPP (4) also bound more strongly to its cognate sequence 5'-ATGCAT-3' (K(eq)=7.4×10(6) M(-1)) via the side-by-side stacked motif than its monoamino analog f-IPP (2a). Although f-PPP (6) bound via a 1:1 motif, it bound strongly to its cognate sequence 5'-AAATTT-3' (K(eq)=4.8×10(7) M(-1)), 15-times higher than the binding of its monoamino analog f-PPP (2c), albeit f-PPP bound via the stacked motif. Finally, f-PIP (5) bound to its target sequence 5'-ATCGAT-3' as a stacked dimer and it has the lowest affinity among the diamino PAs tested (Keq <1×10(5) M(-1)). This was about two times lower in affinity than the binding of its monoamino analog f-PIP (2b). The results further demonstrated that the 'core rules' of DNA recognition by monoamino PAs also apply to their diamino analogs. Specifically, PAs that contain a stacked IP core structure bind most strongly (highest binding constants) to their cognate GC doublet, followed by the binding of PAs with a stacked PP structure to two degenerate AT base pairs, and finally the binding of PAs with a PI core to their cognate CG doublet.

Novel diamino imidazole and pyrrole-containing polyamides: Synthesis and DNA binding studies of mono- and diamino-phenyl-ImPy*Im polyamides designed to target 5'-ACGCGT-3'

Pyrrole- and imidazole-containing polyamides are widely investigated as DNA sequence selective binding agents that have potential use as gene control agents. The key challenges that must be overcome to realize this goal is the development of polyamides with low molar mass so the molecules can readily diffuse into cells and concentrate in the nucleus. In addition, the molecules must have appreciable water solubility, bind DNA sequence specifically, and with high affinity. It is on this basis that the orthogonally positioned diamino/dicationic polyamide Ph-ImPy*Im 5 was designed to target the sequence 5'-ACGCGT-3'. Py* denotes the pyrrole unit that contains a N-substituted aminopropyl pendant group. The DNA binding properties of diamino polyamide 5 were determined using a number of techniques including CD, ΔT(M), DNase I footprinting, SPR and ITC studies. The effects of the second amino moiety in Py* on DNA binding affinity over its monoamino counterpart Ph-ImPyIm 3 were assessed by conducting DNA binding studies of 3 in parallel with 5. The results confirmed the minor groove binding and selectivity of both polyamides for the cognate sequence 5'-ACGCGT-3'. The diamino/dicationic polyamide 5 showed enhanced binding affinity and higher solubility in aqueous media over its monoamino/monocationic counterpart Ph-ImPyIm 3. The binding constant of 5, determined from SPR studies, was found to be 1.5 × 10(7)M(-1), which is ∼3 times higher than that for its monoamino analog 3 (4.8 × 10(6)M(-1)). The affinity of 5 is now approaching that of the parent compound f-ImPyIm 1 and its diamino equivalent 4. The advantages of the design of diamino polyamide 5 over 1 and 4 are its sequence specificity and the ease of synthesis compared to the N-terminus pyrrole analog 2.

Hx, a novel fluorescent, minor groove and sequence specific recognition element: design, synthesis, and DNA binding properties of p-anisylbenzimidazole-imidazole/pyrrole-containing polyamides

With the aim of incorporating a recognition element that acts as a fluorescent probe upon binding to DNA, three novel pyrrole (P) and imidazole (I)-containing polyamides were synthesized. The compounds contain a p-anisylbenzimidazolecarboxamido (Hx) moiety attached to a PP, IP, or PI unit, giving compounds HxPP (2), HxIP (3), and HxPI (4), respectively. These fluorescent hybrids were tested against their complementary nonfluorescent, non-formamido tetraamide counterparts, namely, PPPP (5), PPIP (6), and PPPI (7) (cognate sequences 5'-AAATTT-3', 5'-ATCGAT-3', and 5'-ACATGT-3', respectively). The binding affinities for both series of polyamides for their cognate and noncognate sequences were ascertained by surface plasmon resonance (SPR) studies, which revealed that the Hx-containing polyamides gave binding constants in the 10(6) M(-1) range while little binding was observed for the noncognates. The binding data were further compared to the corresponding and previously reported formamido-triamides f-PPP (8), f-PIP (9), and f-PPI (10). DNase I footprinting studies provided additional evidence that the Hx moiety behaved similarly to two consecutive pyrroles (PP found in 5-7), which also behaved like a formamido-pyrrole (f-P) unit found in distamycin and many formamido-triamides, including 8-10. The biophysical characterization of polyamides 2-7 on their binding to the abovementioned DNA sequences was determined using thermal melts (ΔT(M)), circular dichroism (CD), and isothermal titration calorimetry (ITC) studies. Density functional calculations (B3LYP) provided a theoretical framework that explains the similarity between PP and Hx on the basis of molecular electrostatic surfaces and dipole moments. Furthermore, emission studies on polyamides 2 and 3 showed that upon excitation at 322 nm binding to their respective cognate sequences resulted in an increase in fluorescence at 370 nm. These low molecular weight polyamides show promise for use as probes for monitoring DNA recognition processes in cells.

Grading the commercial optical biosensor literature-Class of 2008: 'The Mighty Binders'

Optical biosensor technology continues to be the method of choice for label-free, real-time interaction analysis. But when it comes to improving the quality of the biosensor literature, education should be fundamental. Of the 1413 articles published in 2008, less than 30% would pass the requirements for high-school chemistry. To teach by example, we spotlight 10 papers that illustrate how to implement the technology properly. Then we grade every paper published in 2008 on a scale from A to F and outline what features make a biosensor article fabulous, middling or abysmal. To help improve the quality of published data, we focus on a few experimental, analysis and presentation mistakes that are alarmingly common. With the literature as a guide, we want to ensure that no user is left behind.

Selective cytostatic and cytotoxic anticancer effects of bisfunctional agents: A strategy for the design of DNA binding agents

Various agents have been synthesized and proved useful for the National Cancer Institute's anticancer testing as potential new drugs, but most agents suffer side effects from their limited selectivity against cancer cells over healthy ones. Therefore, this paper attempts to describe drugs in terms of the level of tumor cell selectivity which they possess to define the features of molecules that are essential for useful cytotoxicity. Selected cyclic amidinothymine analogues (NSC 697864, NSC 697865, and NSC 697869) have nanomolar inhibitory activities against leukemia cell lines: CCRF-CEM, HL-60(TB), while bisfunctional cancer fighters NSC 702408 and NSC 702409, showing larger numbers of cytostatic and cytotoxic effects, in an extended conformation would probably adopt a similar to NSC 715653 conformation leaving both opposite H-bond donor groups at the same distance to interact with DNA in a similar way. Such specific interactions (cell line selectivity to unique mutated patterns) lower considerably the observed dose-response concentrations. This in vitro selectivity is shown to translate into in vivo efficacy indicated by the inflection in the cumulative testing curve.

Polyamide curvature and DNA sequence selective recognition: use of 4-aminobenzamide to adjust curvature

Imidazole and pyrrole-containing polyamides belong to an important class of compounds that can be designed to target specific DNA sequences, and they are potentially useful in applications of controlling gene expression. The extent of polyamide curvature is an important consideration when studying the ability of such compounds to bind in the minor groove of DNA. The current study investigates the importance of curvature using polyamides of the form f-Im-Phenyl-Im, in which the imidazole heterocycles are placed in ortho-, meta-, and para-configurations of the phenyl moiety. The synthesis and biophysical evaluation of each compound binding to its cognate DNA sequence (5'-ACGCGT-3') and a negative control sequence (5'-AAATTT-3') is reported, along with their comparison to the parent binder, f-Im-Py-Im (3). ACGCGT is a medicinally significant sequence present in the MluI cell-cycle box (MCB) transcriptional element found in the promoter of a gene associated with cell division. The results demonstrated that the para-derivative has the greatest affinity for its cognate sequence, as indicated via thermal denaturation, CD, ITC, SPR analyses, and DNase I footprinting. ITC studies showed that binding of the para-isomer (2c) to ACGCGT was significantly more exothermic than binding to AAATTT. In contrast, no heat change was observed for binding of the meta- (2b) and ortho- (2a) isomers to both DNAs, due to low binding affinities. This is consistent with results from SPR studies, which indicate that the para-derivative binds in a 2:1 fashion to ACGCGT and binds weakly to ACCGGT (K = 1.8 x 10(6) and 4.0 x 10(4) M(-1), respectively). Interestingly, it binds in a 1:1 fashion to AAATTT (K = 5.4 x 10(5) M(-1)). The meta-compound does not bind to any sequence. The para-derivative also was the only compound to show an induced peak via CD at 330 nm, indicative of minor groove binding, and produced a DeltaT(m) value of 5.8 degrees C. Molecular modeling experiments have been performed to determine the shape differences between the three compounds, and the results indicate that the para-derivative 2c has a closest curvature to previously synthesized polyamides. DNase I footprinting studies confirmed earlier observations that only the para-derivative 2c produced a footprint with ACGCGT (1 microM) and no significant footprint was observed at any sites examined for meta-2b and ortho-2a analogs up to 40 microM. The results of these studies suggest that the shape of the ortho- and meta- derivatives is too curved to match the curvature of the DNA minor groove to facilitate binding. The para-derivative gives the highest binding affinity in the series and the results illustrate that 4-aminobenzamide is a reasonable substitute for 4-aminopyrrole-2-carboxylate.

Sequence specific and high affinity recognition of 5'-ACGCGT-3' by rationally designed pyrrole-imidazole H-pin polyamides: thermodynamic and structural studies

Imidazole (Im) and Pyrrole (Py)-containing polyamides that can form stacked dimers can be programmed to target specific sequences in the minor groove of DNA and control gene expression. Even though various designs of polyamides have been thoroughly investigated for DNA sequence recognition, the use of H-pin polyamides (covalently cross-linked polyamides) has not received as much attention. Therefore, experiments were designed to systematically investigate the DNA recognition properties of two symmetrical H-pin polyamides composed of PyImPyIm (5) or f-ImPyIm (3e, f=formamido) tethered with an ethylene glycol linker. These compounds were created to recognize the cognate 5'-ACGCGT-3' through an overlapped and staggered binding motif, respectively. Results from DNaseI footprinting, thermal denaturation, circular dichroism, surface plasmon resonance and isothermal titration microcalorimetry studies demonstrated that both H-pin polyamides bound with higher affinity than their respective monomers. The binding affinity of formamido-containing H-pin 3e was more than a hundred times greater than that for the tetraamide H-pin 5, demonstrating the importance of having a formamido group and the staggered motif in enhancing affinity. However, compared to H-pin 3e, tetraamide H-pin 5 demonstrated superior binding preference for the cognate sequence over its non-cognates, ACCGGT and AAATTT. Data from SPR experiments yielded binding constants of 1.6x10(8)M(-1) and 2.0x10(10)M(-1) for PyImPyIm H-pin 5 and f-ImPyIm H-pin 3e, respectively. Both H-pins bound with significantly higher affinity (ca. 100-fold) than their corresponding unlinked PyImPyIm 4 and f-ImPyIm 2 counterparts. ITC analyses revealed modest enthalpies of reactions at 298 K (DeltaH of -3.3 and -1.0 kcal mol(-1) for 5 and 3e, respectively), indicating these were entropic-driven interactions. The heat capacities (DeltaC(p)) were determined to be -116 and -499 cal mol(-1)K(-1), respectively. These results are in general agreement with DeltaC(p) values determined from changes in the solvent accessible surface areas using complexes of the H-pins bound to (5'-CCACGCGTGG)(2). According to the models, the H-pins fit snugly in the minor groove and the linker comfortably holds both polyamide portions in place, with the oxygen atoms pointing into the solvent. In summary, the H-pin polyamide provides an important molecular design motif for the discovery of future generations of programmable small molecules capable of binding to target DNA sequences with high affinity and selectivity.