Mechanical efficacy of vertebroplasty: influence of cement type, BMD, fracture severity, and disc degeneration

Anatomical and biomechanical factors of osteoporotic vertebral fracture and the occurrence of cascade fractures

Osteoporosis weakens the structural strength of bone to such an extent that normal daily activity may exceed the capacity of the vertebra to bear this load. Vertebral fracture and deformity is a hallmark of osteoporosis. The detriment of trabecular bone properties alone cannot explain the occurrence of osteoporotic vertebral fracture. The ability of the spine to bear and resist loads depends on the structural capacity of the vertebrae, but also on loading conditions arising from activities of daily living or low-energy trauma. This review describes the mechanical properties of the vertebral bone, the structural load-bearing capacity of the various elements forming the spine, the neuromuscular control of the trunk, as well as the biomechanics of the loads to which the spine is subjected in relation to the presence of osteoporosis and the risk of vertebral fracture. A better understanding of biomechanical factors may help to explain both the high incidence of osteoporotic vertebral fractures and their mechanism of production. Consideration of these issues may be important in the development of prevention and management strategies.

Effect of bone cement distribution on adjacent disc degeneration after vertebral augmentation for osteoporotic vertebral compression fractures in aging patients

Background

The influence of vertebral augmentation on adjacent intervertebral discs remains controversial. The purpose of this study is to evaluate the effect of bone cement distribution on adjacent disc degeneration after vertebral augmentation for osteoporotic vertebral compression fractures (OVCFs).

Methods

Patients with single level OVCF and upper endplate injury who underwent vertebral augmentation were enrolled. The patients were divided into four groups: Group A: bone cement contacted both the cranial and the distal endplates; Group B: bone cement only contacted the cranial endplate; Group C: bone cement only contacted the distal endplate; and Group D: bone cement contacted neither the cranial nor the distal endplates. The cranial discs of the fractured vertebrae were defined as adjacent discs and the upper discs proximally to the adjacent discs were defined as control discs. Degenerative disc change (DDC) was defined as a deteriorated postoperative Pfirrmann score compared with the preoperative score on MR images. The number of DDC cases and the disc heights were analyzed among the groups.

Results

A total of 184 patients with an average follow-up time of 28.6 months were included. The number of DDC cases in the adjacent discs was significantly higher than in the control discs in groups A (p < 0.001), B (p = 0.002), and D (p = 0.028), whereas the difference in group C was not statistically significant (p = 0.237). The incidence of adjacent disc degeneration was significantly higher in group A than that in group C (p = 0.06). The adjacent disc heights decreased significantly in groups A, B, and D (p < 0.001, p < 0.001, and p = 0.012, respectively), but did not decrease significantly in group C (p = 0.079). However, no statistical differences were detected among the four groups with respect to the preoperative adjacent disc height, follow-up adjacent disc height, preoperative control disc height, or follow-up control disc height.

Conclusion

Bone cement distribution influences adjacent disc degeneration after vertebral augmentation in OVCFs. Cement distribution proximal to the injured endplate can accelerate adjacent disc degeneration, and cement in contact with both the cranial and distal endplates can induce a higher incidence of adjacent disc degeneration.

Comprehensive approach to degenerative spine with fragility spine fracture to improve quality of life: A case report study

INTRODUCTION AND IMPORTANCE

Degeneration process occurs in humans after reaching their maximum potential. The degeneration process in the spine includes osteoporosis and degenerative disc disease, however, the conventional treatment causes many post-operative complications. Minimally invasive procedures have recently been carried out considering the same expected outcome and minimally injuring other tissues. Biological approaches using mesenchymal stem cells (MSCs) and secretomes are more promising for bone-related issues. We report a degenerative spine case managed with minimally invasive procedures combined with a biological approach.

CASE PRESENTATION

An 83-year-old woman with a chief complaint of back pain after a fall, the physical examination found a painful area in the lower back accompanied by motor weakness in both legs, causing daily use of a wheelchair. Radiology examinations showed compression fracture, bulging disc, and osteoporosis. The patient underwent multiple minimally invasive procedures, namely vertebroplasty, MSCs implantation, PLDD, and secretome implantation.

CLINICAL DISCUSSION

From 6 months of follow-up, it was found that the patient's posture getting better, the pain was reduced, and the results of the BMD examination were improved. The patient was able to carry out normal activities. This is due to vertebroplasty which strengthens the structure, PLDD which decompresses the disc, and implantation of MSCs and secretomes which improves the quality of the bone and surrounding tissue.

CONCLUSION

The multi-minimally invasive procedure is potential for complex degenerative spine cases, particularly when combined with biological approaches using stem cells and secretomes in elderly, considering that complications from conventional treatment are quite common in elderly.

Review of Biomechanical Studies and Finite Element Modeling of Sternal Closure Using Bio-Active Adhesives

The most common complication of median sternotomy surgery is sternum re-separation after sternal fixation, which leads to high rates of morbidity and mortality. The adhered sternal fixation technique comprises the wiring fixation technique and the use of bio-adhesives. Adhered sternal fixation techniques have not been extensively studied using finite element analysis, so mechanical testing studies and finite element analysis of sternal fixation will be presented in this review to find the optimum techniques for simulating sternal fixation with adhesives. The optimal wiring technique should enhance bone stability and limit sternal displacement. Bio-adhesives have been proposed to support sternal fixation, as wiring is prone to failure in cases of post-operative problems. The aim of this paper is to review and present the existing numerical and biomechanical sternal fixation studies by reviewing common sternal closure techniques, adhesives for sternal closure, biomechanical modeling of sternal fixation, and finite element modeling of sternal fixation systems. Investigating the physical behavior of 3D sternal fixation models by finite element analysis (FEA) will lower the expense of conducting clinical trials. This indicates that FEA studies of sternal fixation with adhesives are needed to analyze the efficiency of this sternal closure technique virtually.

Effects of Location and Volume of Intraosseous Cement on Adjacent Level of Osteoporotic Spine Undergoing Kyphoplasty: Finite Element Analysis

OBJECTIVE

Kyphoplasty (KP) is a surgery used to reduce pain and increase stability by injecting medical bone cement into broken vertebrae. The purpose of this study was to determine the ideal amount of cement and injection site by analyzing forces with the finite element method.

METHODS

We modeled the anatomical structure of the vertebra and injected the cement at T12. By increasing the amount of cement from 1 cc to 22 cc, stress applied to T11 and L1 cortical was calculated. In addition, stress applied to the adjacent KP level was calculated with different injection sites (medial, anterosuperior, posterosuperior, anteroinferior, and posteroinferior). After 5 cc cement was inserted, adjacent end plate stress was analyzed.

RESULTS

In this study, break point adjacent bone stress according to the capacity of cement was bimodal. Flexion/extension and lateral bending conditions showed similar break points (11.5-11.7 cc and 18.5-18.6 cc, respectively). When cement injection was changed, front under and back under had the highest stress values among various parts, whereas the center position showed the lowest stress value.

CONCLUSIONS

With increasing amount of bone cement, stress on the upper and lower end plates of the cemented segment increased significantly. Thus, increasing cement amount to be more than 11.5 cc has a potential risk of adjacent fracture. Centrally injected bone cement can lower the risk of adjacent fracture after percutaneous KP.

In vitro immunomodulatory effects of novel strontium and zinc-containing GPCs

BACKGROUND

Glass polyalkenoate cements (GPCs) are bio-adhesives which consist of ionomeric glass particles embedded in a poly-salt matrix. These materials have been used in dentistry and orthodontics extensively but are presently being optimized as bone putties for orthopedic applications.

OBJECTIVE

This study utilized a patented ionomeric glass (mole fraction: SiO2:0.48, ZnO:0.36, CaO:0.12, SrO:0.04) to formulate two GPCs: GPC A (<45 μm particle size glass) and GPC B (45 μm-63 μm). These formulations were previously assessed for their effect on osteoblast viability and osteogenic function. However, the immunomodulatory effects of GPC A and B have not previously been investigated.

METHOD

Non-toxic concentrations of (a) GPC dissolution products and (b) fragmented GPC particles were tested for their ability to affect the secretion of cytokines (TNF-α, IL-1β, IL-6 and IL-10) by rat peripheral blood mononuclear cells (PBMCs), in the presence or absence of the stimulant liposaccharide (LPS). Additionally, the ionic concentrations of Sr, Zn, Ca, and Si were measured in GPC ionic extracts, and the size, shape and concentration of fragmented GPC particles in deionized water were characterized using an optical microscope-based particle analyzer.

RESULTS

The results showed that GPC A ionic products reduced the concentration of TNF-α secreted by stimulated cells compared with cells stimulated in the absence of GPC products. Interestingly, the particles released from GPC A significantly increased the secretion of both TNF-α and IL-6 from unstimulated cells, compared to control cells.

CONCLUSION

Neither GPC B ionic products nor released particles were found to be biologically active with respect to PBMC cytokine secretion.

In vitro osteogenic performance of two novel strontium and zinc-containing glass polyalkenoate cements

Glass polyalkenoate cements (GPCs) are under investigation as potential bone adhesives, as they may provide an alternative to polymethylmethacrylate-based cements. GPCs containing strontium (Sr) and zinc (Zn) in place of aluminium (Al) are of particular interest because these ions are known stimulators of osteoprogenitor differentiation. GPCs have been manufactured from a novel bioactive glass (SiO2 :0.48, ZnO:0.36, CaO:0.12, SrO:0.04) in the past, but, while such materials have been assessed for their influence on viability, their influence on osteogenic function has not been investigated until now. For this study, two GPCs were formulated from the same glass precursor evaluated in previous studies. These GPCs were named GPC A and GPC B, and they differed in glass particle size, polyacrylic acid molecular weight, and their powder: liquid ratios. The effect of these two GPCs on osteogenic differentiation of primary rat osteoblasts were evaluated using three culture systems: culture with dissolution extracts, indirect contact with transwell-inserts and direct contact. Additionally, the degradation characteristics of GPCs were assessed, including their interfacial pH and surrounding pH. The experimental outcomes revealed that collagen deposition, alkaline phosphatase expression, and mineralization were largely dependent on GPC composition as well as the mode of interaction with cells. These markers were found to be significantly elevated in response to GPC A's dissolution products. However, osteogenic differentiation was inhibited when osteoblasts were cultured indirectly and directly with GPCs, with, overall, GPC B significantly outperforming GPC A. These results suggest that GPC degradation products effect osteogenic differentiation in a dose-dependent manner.

Spine biomechanical testing methodologies: The controversy of consensus vs scientific evidence

Biomechanical testing methodologies for the spine have developed over the past 50 years. During that time, there have been several paradigm shifts with respect to techniques. These techniques evolved by incorporating state-of-the-art engineering principles, in vivo measurements, anatomical structure-function relationships, and the scientific method. Multiple parametric studies have focused on the effects that the experimental technique has on outcomes. As a result, testing methodologies have evolved, but there are no standard testing protocols, which makes the comparison of findings between experiments difficult and conclusions about in vivo performance challenging. In 2019, the international spine research community was surveyed to determine the consensus on spine biomechanical testing and if the consensus opinion was consistent with the scientific evidence. More than 80 responses to the survey were received. The findings of this survey confirmed that while some methods have been commonly adopted, not all are consistent with the scientific evidence. This review summarizes the scientific literature, the current consensus, and the authors' recommendations on best practices based on the compendium of available evidence.

The mechanism of thoracolumbar burst fracture may be related to the basivertebral foramen

BACKGROUND CONTEXT

The basivertebral foramen (BF), located in the middle posterior wall of the vertebral body, may induce local weakness and contribute to the formation of a retropulsed bone fragment (RBF) in thoracolumbar burst fracture (TLBF). We hypothesize that the mechanism of TLBF is related to the BF.

PURPOSE

This study aimed to clarify the relationship between RBFs and the BF in TLBFs, and to explain the results using biomechanical experiments and micro-computed tomography (micro-CT).

STUDY DESIGN

A comprehensive research involving clinical radiology, micro-CT, and biomechanical experiments on cadaveric spines was carried out.

PATIENT SAMPLE

A total of 162 consecutive patients diagnosed with TLBF with RBFs, drawn from 256 patients who had reported accidents or injuries to their thoracolumbar spine, comprised the patient sample.

OUTCOME MEASURES

Dimensions and location of the RBFs in relation to the BF were the outcome measures.

MATERIALS AND METHODS

Computed tomography reconstruction imaging was used to measure the dimensions and location of RBFs in 162 patients (length, height, width of RBF and vertebral body). Furthermore, micro-CT scans were obtained of 10 cadaveric spines. Each vertebral body was divided into three layers (superior, middle, and inferior), and each layer was divided further into nine regions (R1-R9). Microarchitecture parameters were calculated from micro-CT scans, including bone volume fraction (BV/TV), connectivity (Conn.D), trabecular number (Tb.N), trabecular thickness (Tb.Th), and bone mineral density (BMD). Differences were analyzed between regions and layers. Burst fractures were simulated on cadaveric spines to explore the fracture line location and test the relationship between RBFs and BF.

RESULTS

Retropulsed bone fragment width was usually one-third of the width of the vertebral body, whereas RBF length and height were approximately half of the corresponding vertebral body dimensions. Measures of trabecular bone quality were generally lowest in those central and superior regions of the vertebral body which are adjacent to the BF and which are most affected by burst fracture. In simulated TLBFs, the fracture line went across the vertex or upper surface of the BF.

CONCLUSIONS

The most vulnerable regions in the vertebral body lie within or just superior to the BF. The central MR2 region in particular is at risk of fracture and RBF formation.

METHODS FOR THE CHARACTERIZATION OF THE LONG-TERM MECHANICAL PERFORMANCE OF CEMENTS FOR VERTEBROPLASTY AND KYPHOPLASTY: CRITICAL REVIEW AND SUGGESTIONS FOR TEST METHODS

There is a growing interest towards bone cements for use in vertebroplasty and kyphoplasty, as such spine procedures are becoming more and more common. Such cements feature different compositions, including both traditional acrylic cements and resorbable and bioactive materials. Due to the different compositions and intended use, the mechanical requirements of cements for spinal applications differ from those of traditional cements used in joint replacement. Because of the great clinical implications, it is very important to assess their long-term mechanical competence in terms of fatigue strength and creep. This paper aims at offering a critical overview of the methods currently adopted for such mechanical tests. The existing international standards and guidelines and the literature were searched for publications relevant to fatigue and creep of cements for vertebroplasty and kyphoplasty. While standard methods are available for traditional bone cements in general, no standard indicates specific methods or acceptance criteria for fatigue and creep of cements for vertebroplasty and kyphoplasty. Similarly, a large number of papers were published on cements for joint replacements, but only few cover fatigue and creep of cements for vertebroplasty and kyphoplasty. Furthermore, the literature was analyzed to provide some indications of tests parameters and acceptance criteria (number of cycles, duration in time, stress levels, acceptable amount of creep) for possible tests specifically relevant to cements for spinal applications.

How are adjacent spinal levels affected by vertebral fracture and by vertebroplasty? A biomechanical study on cadaveric spines

BACKGROUND CONTEXT

Spinal injuries and surgery may have important effects on neighboring spinal levels, but previous investigations of adjacent-level biomechanics have produced conflicting results. We use "stress profilometry" and noncontact strain measurements to investigate thoroughly this long-standing problem.

PURPOSE

This study aimed to determine how vertebral fracture and vertebroplasty affect compressive load-sharing and vertebral deformations at adjacent spinal levels.

STUDY DESIGN

We conducted mechanical experiments on cadaver spines.

METHODS

Twenty-eight cadaveric spine specimens, comprising three thoracolumbar vertebrae and the intervening discs and ligaments, were dissected from fourteen cadavers aged 67-92 years. A needle-mounted pressure transducer was used to measure the distribution of compressive stress across the anteroposterior diameter of both intervertebral discs. "Stress profiles" were analyzed to quantify intradiscal pressure (IDP) and concentrations of compressive stress in the anterior and posterior annulus. Summation of stresses over discrete areas yielded the compressive force acting on the anterior and posterior halves of each vertebral body, and the compressive force resisted by the neural arch. Creep deformations of vertebral bodies under load were measured using an optical MacReflex system. All measurements were repeated following compressive injury to one of the three vertebrae, and again after the injury had been treated by vertebroplasty. The study was funded by a grant from Action Medical Research, UK ($143,230). Authors of this study have no conflicts of interest to disclose.

RESULTS

Injury usually involved endplate fracture, often combined with deformation of the anterior cortex, so that the affected vertebral body developed slight anterior wedging. Injury reduced IDP at the affected level, to an average 47% of pre-fracture values (p<.001), and transferred compressive load-bearing from nucleus to annulus, and also from disc to neural arch. Similar but reduced effects were seen at adjacent (non-fractured) levels, where mean IDP was reduced to 73% of baseline values (p<.001). Vertebroplasty partially reversed these changes, increasing mean IDP to 76% and 81% of baseline values at fractured and adjacent levels, respectively. Injury also increased creep deformation of the vertebral body under load, especially in the anterior region where a 14-fold increase was observed at the fractured level and a threefold increase was observed at the adjacent level. Vertebroplasty also reversed these changes, reducing deformation of the anterior vertebral body (compared with post-fracture values) by 62% at the fractured level, and by 52% at the adjacent level.

CONCLUSIONS

Vertebral fracture adversely affects compressive load-sharing and increases vertebral deformations at both fractured and adjacent levels. All effects can be partially reversed by vertebroplasty.

Defects of the vertebral end plate: implications for disc degeneration depend on size

BACKGROUND CONTEXT

Bony vertebral end plates must be porous to allow metabolite transport into the disc, and yet strong to resist high intradiscal pressure (IDP). End plate defects may therefore have nutritional and mechanical consequences for the disc, depending on their size and type. We hypothesize that broad, diffuse defects are more closely associated with disc decompression and degeneration than are focal Schmorl's node-type defects.

PURPOSE

This study aimed to determine how the size and type of end plate defects are related to decompression and degeneration in the adjacent intervertebral disc.

STUDY DESIGN

Mechanical, histologic, and micro-computed tomographic investigations were carried out in cadaver spines.

METHODS

The study involved 40 motion segments (T8-T9 to L4-L5) dissected from 23 cadavers aged 48-98 years. Intradiscal stresses were measured, under 1 kN compression, by pulling a pressure transducer along the disc's midsagittal diameter. The resulting "stress profiles" revealed nucleus pressure (IDP) and maximum stresses in the anterior and posterior annulus. Micro-computed tomography was then used to examine all 40 discs, with 5 mm of adjacent bone on either side, so that end plate defects could be characterized at a resolution of 35 µm. Cross-sectional area (in the transverse plane), volume, location, and morphologic type were determined for all bony defects in the 80 end plates. Finally, discs from each motion segment (with hyaline cartilage and bone attached) were sectioned (undecalcified) at 7 µm for histology to allow degeneration to be assessed.

RESULTS

Substantial defects were identified in 24 of 40 specimens (35 of 80 end plates). Of these, 83% was centrally located, and 17% was laterally located. Defects occurred more frequently in male than female specimens (p=.043), and were more common in thoracic than lumbar end plates (p=.002), although lumbar defects were greater in volume (p=.05). Defect area and volume increased with decreasing IDP, with decreasing peak stress in the annulus, and with increasing tissue degeneration. Stepwise multiple regression showed that average defect area depended most strongly on IDP, whereas maximum defect area and volume depended most strongly on peak stress in the anterior annulus. Multiple end plate defects were associated with lower values of IDP and higher degeneration scores when compared with erosions and Schmorl's nodes.

CONCLUSIONS

Disc degeneration has a stronger association with large or multiple end plate defects than with small or single defects (of any type). Large end plate defects probably allow greater volume changes within the disc, leading to greater nucleus decompression.

Evaluation of an injectable hydrogel and polymethyl methacrylate in restoring mechanics to compressively fractured spine motion segments

BACKGROUND CONTEXT

Compressive fracture can produce profound changes to the mechanical profile of a spine segment. Minimally invasive repair has the potential to restore both function and structural integrity to an injured spine. Use of both hydrogels to address changes to the disc, combined with polymethyl methacrylate (PMMA) to address changes to the vertebral body, has the potential to facilitate repair.

PURPOSE

The purpose of this investigation was to determine if the combined use of hydrogel injection and PMMA could restore the mechanical profile of an axially injured spinal motion segment.

STUDY DESIGN

This is a basic science study evaluating a combination of hydrogel injection and vertebroplasty on restoring mechanics to compressively injured porcine spine motion segments.

METHODS

Fourteen porcine spine motion segments were subject to axial compression until fracture using a dynamic servohydraulic testing apparatus. Rotational and compressive stiffness was measured for each specimen under the following conditions: initial undamaged, fractured, fatigue loading under compression, hydrogel injection, PMMA injection, and fatigue loading under compression. Group 1 received hydrogel injection followed by PMMA injection, whereas Group 2 received PMMA injection followed by hydrogel injection. This study was funded under a Natural Sciences and Engineering Research Council of Canada discovery grant.

RESULTS

PMMA injection was found to alter the compressive stiffness properties of axially injured spine motion segments, restoring values from Groups 1 and 2 to 89.3%±29.3% and 81%±27.9% of initial values respectively. Hydrogel injection was found to alter the rotational stiffness properties, restoring specimens in Groups 1 and 2 to 151.5%±81% and 177.2%±54.9% of initial values respectively. Prolonged restoration of function was not possible, however, after further fatigue loading.

CONCLUSIONS

Using this repair technique, replication of the mechanism of injury appears to cause a rapid deterioration in function of the motion segments. Containment of the hydrogel appears to be an issue with large breaches in the end plate, as it is posited to migrate into the cancellous bone of the vertebral body. Future work should attempt to evaluate methods in fully sealing the disc space.

Appropriate Cement Volume in Vertebroplasty: A Multivariate Analysis with Short-Term Follow-Up

OBJECTIVE

The optimal threshold of the infusion volume of cement has been a continuous subject in percutaneous vertebroplasty (PVP). This study verifies a causal relationship between the cement volume and the clinical outcome, and suggests the parameters of the appropriate volume of cement in PVP.

METHODS

This is a retrospective study. One hundred nine patients, who underwent PVP between 2012 and 2015, were included in the study. Various factors such as patients' fracture levels, fracture types, fracture body volumes, fracture rates, bone mineral densities, and infused cement volumes were analyzed. Cement infusion ratios were calculated, using total amount of infused cement and fractured body volume. Follow up was done after one-week, one-month and three-months, postoperatively. Changes in the middle body height and the cement leakage levels were monitored and clinical outcomes were evaluated using a visual analogue scale.

RESULTS

Among the variables, the infusion ratio (r=-0.320, p=0.003, Pearson's correlation) was the only index that showed a significant cause and effect relationship with favorable clinical outcome, except the group with a T-score of higher than -2.5, and the group with a upper thoracic vertebral level. The patients with a cement infusion ratio of 27.8% or more of the fractured body volume had favorable results.

CONCLUSION

This study showed that high cement infusion ratio revealed favorable outcome in the vertebroplasty of the osteoporotic compression fractures. Infusion ratio of more than 27.8% to osteoporotic compressed vertebrae is optimal for rapid recovery after PVP.

Secondary balloon kyphoplasty for new vertebral compression fracture after initial single-level balloon kyphoplasty for osteoporotic vertebral compression fracture

PURPOSE

To explore the efficacy of secondary balloon kyphoplasty (BKP) for new vertebral compression fracture (NVCF) of previously non-fractured, non-treated vertebrae after previous BKP and to compare the therapeutic effect between patients with single-level adjacent NVCF and remote NVCF.

METHODS

We retrospectively studied patients with single-level NVCF after initial BKP in our hospital from January 2007 to August 2014. The mean follow-up time from secondary BKP was 13.78 ± 3.18 (12-24) months. Visual analog scale (VAS) and Oswestry disability index (ODI) scores were assessed prior to the initial BKP, one day after initial BKP, prior to the secondary BKP, one day after the secondary BKP, and at last follow-up. Kyphotic angle and vertebral heights were also compared for secondary BKP. Data were compared between patients with adjacent NVCF and remote NVCF.

RESULTS

36 patients were investigated. Compared with pre-operative value of initial and secondary BKP, patients in both groups gained statistical significant improvements for VAS and ODI after initial and secondary BKP, respectively (P < 0.05), and this improvement maintained at final follow-up. No statistical difference in VAS was found between the 2 groups after initial BKP and prior to the secondary BKP (P > 0.05), but patients in remote NVCF group achieved better VAS score than patients in adjacent NVCF group after the secondary BKP and at the final follow-up (P < 0.05). No statistical differences were detected in ODI between the 2 groups prior to the initial BKP, one day after initial BKP, prior to the secondary BKP and 1 day after the secondary BKP (P > 0.05), but the ODI scores were higher in adjacent NVCF group than in remote NVCF at last follow-up (P < 0.05). Kyphotic angle and vertebral heights were significantly restored and maintained after secondary BKP within groups, respectively.

CONCLUSIONS

Secondary BKP is an effective procedure for treating NVCF after initial BKP. Patients with new fracture in remote level gain slightly better pain relief than those in the adjacent level.

Safety and Efficacy Studies of Vertebroplasty, Kyphoplasty, and Mesh-Container-Plasty for the Treatment of Vertebral Compression Fractures: Preliminary Report

To evaluate the clinical safety and efficacies of percutaneous vertebroplasty (PVP), percutaneous kyphoplasty (PKP), and percutaneous mesh-container-plasty (PMCP) for the treatment of vertebral compression fractures (VCFs), a retrospective study of 90 patients with VCFs who had been treated by PVP (n = 30), PKP (n = 30), and PMCP (n = 30) was conducted. The clinical efficacies of these three treatments were evaluated by comparing their PMMA cement leakages, cement patterns, height restoration percentages, wedge angles, visual analogue scales (VAS), and oswestry disability index (ODI) at the pre- and post-operative time points. 6.67%, 3.33%, and 0% of patients had PMMA leakage in PVP, PKP, and PMCP groups, respectively. Three (solid, trabecular, and mixed patterns), two (solid and mixed patterns), and one (mixed patterns) types of cement patterns were observed in PVP, PKP, and PMCP groups, respectively. PKP and PMCP treatments had better height restoration ability than PVP treatment. PVP, PKP, and PMCP treatments had significant and similar ability in pain relief and functional recovery ability for the treatment of VCFs. These results indicate minimally invasive techniques were effective methods for the treatment of VCFs. Moreover, these initial outcomes suggest PMCP treatment may be better than both PVP treatment and PKP treatment.

Effective modulus of the human intervertebral disc and its effect on vertebral bone stress

The mechanism of vertebral wedge fractures remains unclear and may relate to typical variations in the mechanical behavior of the intervertebral disc. To gain insight, we tested 16 individual whole discs (between levels T8 and L5) from nine cadavers (mean±SD: 66±16 years), loaded in compression at different rates (0.05-20.0% strain/s), to measure a homogenized "effective" linear elastic modulus of the entire disc. The measured effective modulus, and average disc height, were then input and varied parametrically in micro-CT-based finite element models (60-μm element size, up to 80 million elements each) of six T9 human vertebrae that were virtually loaded to 3° of moderate forward-flexion via a homogenized disc. Across all specimens and loading rates, the measured effective modulus of the disc ranged from 5.8 to 42.7MPa and was significantly higher for higher rates of loading (p<0.002); average disc height ranged from 2.9 to 9.3mm. The parametric finite element analysis indicated that, as disc modulus increased and disc height decreased across these ranges, the vertebral bone stresses increased but their spatial distribution was largely unchanged: most of the highest stresses occurred in the central trabecular bone and endplates, and not anteriorly. Taken together with the literature, our findings suggest that the effective modulus of the human intervertebral disc should rarely exceed 100MPa and that typical variations in disc effective modulus (and less so, height) minimally influence the spatial distribution but can appreciably influence the magnitude of stress within the vertebral body.

Polydopamine-Gelatin as Universal Cell-Interactive Coating for Methacrylate-Based Medical Device Packaging Materials: When Surface Chemistry Overrules Substrate Bulk Properties

Despite its widespread application in the fields of ophthalmology, orthopedics, and dentistry and the stringent need for polymer packagings that induce in vivo tissue integration, the full potential of poly(methyl methacrylate) (PMMA) and its derivatives as medical device packaging material has not been explored yet. We therefore elaborated on the development of a universal coating for methacrylate-based materials that ideally should reveal cell-interactivity irrespective of the polymer substrate bulk properties. Within this perspective, the present work reports on the UV-induced synthesis of PMMA and its more flexible poly(ethylene glycol) (PEG)-based derivative (PMMAPEG) and its subsequent surface decoration using polydopamine (PDA) as well as PDA combined with gelatin B (Gel B). Successful application of both layers was confirmed by multiple surface characterization techniques. The cell interactivity of the materials was studied by performing live-dead assays and immunostainings of the cytoskeletal components of fibroblasts. It can be concluded that only the combination of PDA and Gel B yields materials possessing similar cell interactivities, irrespective of the physicochemical properties of the underlying substrate. The proposed coating outperforms both the PDA functionalized and the pristine polymer surfaces. A universal cell-interactive coating for methacrylate-based medical device packaging materials has thus been realized.

The Incidence of New Vertebral Fractures Following Vertebral Augmentation: A Meta-Analysis of Randomized Controlled Trials

A meta-analysis of randomized controlled trials was performed that compares the relationship between percutaneous vertebral augmentation (PVA) and conservative treatments with the incidence of new vertebral fractures. Using meta-analytic techniques, this study compares PVA and conservative treatment for incidence of new vertebral fractures, particularly incidence of adjacent fractures that occur following treatment.A focus of clinicians has been on whether PVA increases the risk of new vertebral fractures. Pubmed, EMBASE, and the Cochrane Central Register of Controlled Trials were searched to retrieve literature published from the establishment of the databases until April 28, 2015. Literature of related areas was searched manually. The main outcome indicator was the incidence of new vertebral fractures at final follow-up appointment. In addition, we evaluated the incidence of new vertebral fractures in different follow-up periods and the incidence of adjacent fractures. The RevMan 5.3 software program of the Cochrane Collaboration was used to analyze the data. For dichotomous variables, the risk ratio (RR) and a confidence interval (CI) of 95% were used to express the heterogeneity of the effect size. Seven randomized controlled trial studies were selected from the literature. The studies include 871 patients, 436 of whom received PVA treatment and the rest received conservative treatment. Combined analysis of the 7 studies showed that the numbers of new vertebral fractures in the 2 groups are not significantly different. Six studies reported the numbers of new adjacent fractures. Considering the heterogeneity among the studies, 2 subgroups were formed. The 5 studies in the European group showed that the incidence of new adjacent fractures in the PVA-treated group is higher than that in the conservatively treated group, and the difference is statistically significant. The one study in the Asian group showed no significant difference between the incidences of adjacent fractures in the 2 groups. PVA treatment does not increase the incidence of new vertebral fractures. Most studies reported that PVA increases the incidence of adjacent fractures, yet it is rarely stated that both PVA and conservative treatment lead to the same incidence of adjacent fractures.

Porosity and Thickness of the Vertebral Endplate Depend on Local Mechanical Loading

STUDY DESIGN

Mechanical and microcomputed tomography (micro-CT) study of cadaver spines.

OBJECTIVE

To compare porosity and thickness of vertebral endplates with (1) compressive stresses measured in adjacent intervertebral discs and (2) grade of disc degeneration.

SUMMARY OF BACKGROUND DATA

Endplate porosity is important for disc metabolite transport, and yet porosity increases with age and disc degeneration. We hypothesize that porosity is largely determined by mechanical loading from adjacent discs.

METHODS

Forty motion segments (T8-9 to L4-5) were dissected from 23 cadavers aged 48 to 98 years. Each was subjected to 1 kN compression during which time intradiscal stresses were measured by pulling a pressure transducer along the disc's midsagittal diameter. "Stress profiles" revealed the average pressure in the nucleus, and the maximum stress in the anterior and posterior annulus. Specimens were further dissected to obtain discs with endplates (and 5 mm of bone) on either side. Microcomputed tomography scans (resolution 35 μm) were analyzed to calculate thickness and porosity in the midsagittal regions of all 80 endplates. Average values for the anterior, central, and posterior regions of each endplate were obtained. Disc degeneration was assessed macroscopically and microscopically.

RESULTS

Endplate porosity was inversely related to its thickness, being greatest in the central region opposite the nucleus, and least near the periphery. Superior endplates (relative to the disc) were 14% thicker (P < 0.001) and 4% less porous (P = 0.008) than inferior. In each of the 3 endplate regions (anterior, central, and posterior), porosity was inversely and significantly related to mechanical loading (pressure or maximum stress) in the adjacent disc region (P < 0.01 in all cases). Disc degeneration was best predicted by (reduced) nucleus pressure (R = 0.46, P < 0.001) and (reduced) maximum stress in the anterior annulus (R = 0.31, P < 0.001).

CONCLUSION

Mechanical loading is a major determinant of endplate thickness and porosity. Disc degeneration is more closely related to reduced disc stresses than to endplate thickness or porosity.

LEVEL OF EVIDENCE

N/A.

[Cement augmentation on the spine : Biomechanical considerations]

BACKGROUND

Vertebral compression fractures are the most common osteoporotic fractures. Since the introduction of vertebroplasty and screw augmentation, the management of osteoporotic fractures has changed significantly.

AIMS

The biomechanical characteristics of the risk of adjacent fractures and novel treatment modalities for osteoporotic vertebral fractures, including pure cement augmentation by vertebroplasty, and cement augmentation of screws for posterior instrumentation, are explored.

MATERIALS AND METHODS

Eighteen human osteoporotic lumbar spines (L1-5) adjacent to vertebral bodies after vertebroplasty were tested in a servo-hydraulic machine. As augmentation compounds we used standard cement and a modified low-strength cement. Different anchoring pedicle screws were tested with and without cement augmentation in another cohort of human specimens with a simple pull-out test and a fatigue test that better reflects physiological conditions.

RESULTS

Cement augmentation in the osteoporotic spine leads to greater biomechanical stability. However, change in vertebral stiffness resulted in alterations with the risk of adjacent fractures. By using a less firm cement compound, the risk of adjacent fractures is significantly reduced. Both screw augmentation techniques resulted in a significant increase in the withdrawal force compared with the group without cement. Augmentation using perforated screws showed the highest stability in the fatigue test.

DISCUSSION AND CONCLUSION

The augmentation of cement leads to a significant change in the biomechanical properties. Differences in the stability of adjacent vertebral bodies increase the risk of adjacent fractures, which could be mitigated by a modified cement compound with reduced strength. Screws that were specifically designed for cement application displayed greatest stability in the fatigue test.

Pathogenesis of Vertebral Anterior Wedge Deformity: A 2-Stage Process?

STUDY DESIGN

Biomechanical and radiographical study on cadaveric spines.

OBJECTIVE

To explain the pathogenesis of vertebral "anterior wedge" deformity, which causes senile kyphosis.

SUMMARY OF BACKGROUND DATA

This deformity arises with minimal trauma and is difficult to reproduce in cadaveric spines. We hypothesize that wedging is created by a 2-stage process. First, excessive loading damages a vertebral endplate and decompresses the adjacent intervertebral disc. This alters load sharing between the vertebral body cortex and trabeculae so that subsequent cyclic loading causes progressive collapse of the unsupported anterior cortex.

METHODS

Thirty-four cadaveric thoracolumbar "motion segments," aged 70 to 98 years, were positioned in flexion and overloaded in compression. Physiologically reasonable cyclic compressive loading was then applied to each flexed specimen, at progressively higher loads, for up to 2 hours. Before and after initial overload and again after cyclic loading, the distribution of loading on the vertebra was assessed from measurements of compressive stress within the adjacent disc. These "stress profiles" were repeated in the neutral, flexed, and extended postures. Progressive vertebral body deformity was assessed radiographically.

RESULTS

Compressive overload induced endplate fracture at an average force of 2.31 kN. There was minimal anterior wedging, but pressure in the adjacent disc nucleus (in flexion) fell by an average of 55% and neural arch load bearing increased by 166%. Subsequent cyclic loading exaggerated these changes and concentrated compressive stress within the anterior annulus. After both stages, height of the anterior and posterior vertebral cortexes was reduced by 32% and 12%, respectively, so that anterior wedging of the vertebral body increased from 5.0° to 11.4° on average. All changes were highly significant (P < 0.001).

CONCLUSION

Anterior wedge deformities can be created consistently by a 2-stage process involving initial endplate damage, followed by progressive collapse of the anterior cortex. Detecting initial endplate damage may be important to minimize vertebral deformity in patients with osteoporosis.

LEVEL OF EVIDENCE

N/A.

THE BIOMECHANICAL EFFECTS OF CEMENT AUGMENTATION AND PARTIAL VERTEBRAL HEIGHT RESTORATION ON THE LOAD TRANSFER CHANGE OF ADJACENT VERTEBRAE IN VERTEBROPLASTY

Vertebroplasty is commonly used to treat vertebral wedge fractures (VWFs). However, differing degrees of vertebral height restoration (VHR) have been reported after vertebroplasty, and little is known about how grades (steepness) of VWF deformities affect loadings on the fractured and adjacent unfractured vertebrae. Therefore, the goal of this study was to create a non-linear finite element (FE) model of the T10–L2 thoracolumbar segments. With this model, we aimed to evaluate the biomechanical outcomes of three different collapse models (25%, 50%, and 75%) at the T12 vertebra before and after cement augmentation (CA) and with and without VHR. In these VWF simulations, the forces of the erector spinae, the intradiscal pressure, and the maximum von Mises stresses in the endplates and vertebral bodies increased as vertebral deformation increased. Performing CA alone, without restoring vertebral height for the fractured vertebra, did not change the stiffness of multiple spinal segments or the pressures on the adjacent disc, but it did decrease stresses on the endplates and the vertebral bone. A 10% restoration of vertebral height after CA reduced the maximum von Mises stress in the endplates and bone structures more than when CA did not restore vertebral height (no VHR). These results suggest that achieving partial VHR during vertebroplasty may help prevent postvertebroplasty fractures in the fractured and adjacent vertebrae.

Is kyphoplasty better than vertebroplasty at restoring form and function after severe vertebral wedge fractures?

BACKGROUND CONTEXT

The vertebral augmentation procedures, vertebroplasty and kyphoplasty, can relieve pain and facilitate mobilization of patients with osteoporotic vertebral fractures. Kyphoplasty also aims to restore vertebral body height before cement injection and so may be advantageous for more severe fractures.

PURPOSE

The purpose of this study was to compare the ability of vertebroplasty and kyphoplasty to restore vertebral height, shape, and mechanical function after severe vertebral wedge fractures.

STUDY DESIGN/SETTING

This is a biomechanical and radiographic study using human cadaveric spines.

METHODS

Seventeen pairs of thoracolumbar "motion segments" from cadavers aged 70-98 years were injured, in a two-stage process involving flexion and compression, to create severe anterior wedge fractures. One of each pair underwent vertebroplasty and the other kyphoplasty. Specimens were then compressed at 1 kN for 1 hour to allow consolidation. Radiographs were taken before and after injury, after treatment, and after consolidation. At these same time points, motion segment compressive stiffness was assessed, and intervertebral disc "stress profiles" were obtained to characterize the distribution of compressive stress on the vertebral body and neural arch.

RESULTS

On average, injury reduced anterior vertebral body height by 34%, increased its anterior wedge angle from 5.0° to 11.4°, reduced intradiscal (nucleus) pressure and motion segment stiffness by 96% and 44%, respectively, and increased neural arch load bearing by 57%. Kyphoplasty caused 97% of the anterior height loss to be regained immediately, although this reduced to 79% after consolidation. Equivalent gains after vertebroplasty were significantly lower: 59% and 47%, respectively (p<.001). Kyphoplasty reduced vertebral wedging more than vertebroplasty (p<.02). Intradiscal pressure, neural arch load bearing, and motion segment compressive stiffness were restored significantly toward prefracture values after both augmentation procedures, even after consolidation, but these mechanical effects were similar for kyphoplasty and vertebroplasty.

CONCLUSIONS

After severe vertebral wedge fractures, vertebroplasty and kyphoplasty were equally effective in restoring mechanical function. However, kyphoplasty was better able to restore vertebral height and reverse wedge deformity.

Vertebroplasty Using Calcium Triglyceride Bone Cement (Kryptonite™) for Vertebral Compression Fractures. A Single-Centre Preliminary Study of Outcomes at One-Year Follow-up

This study assessed the one-year clinical and radiographic outcomes, in terms of pain-relief, vertebral re-fracture and complications, after vertebroplasty (VP) using a new osteoconductive cement (calcium triglyceride bone cement - Kryptonite™ bone cement, Doctors Research Group Inc., Southbury, CT, USA) to treat osteoporotic vertebral compression fractures. Sixteen consecutive osteoporotic patients (12 women and four men, mean age 68+/-10.5) were treated with VP using Kryptonite™ bone cement for a total of 20 vertebral fractures. All the patients complained of a pain syndrome resistant to medical therapy and all procedures were performed under fluoroscopy control with neuroleptoanalgesia using a monopedicular approach in 12 patients and bipedicular approach in four patients. All patients were studied by MR and MDCT and were evaluated with the visual analogue scale (VAS) and the Oswestry disability index (ODI) before treatment and at one and 12 months after the procedure. A successful outcome was observed in 80% of patients, with a complete resolution of pain. Differences in pre and post treatment VAS and ODI at one-year follow-up were significant (P<0.0001). We observed a disk and venous leakage in 66% of patients but only in one case did an asymptomatic pulmonary embolism occur during cement injection. Two cases of vertebral re-fractures at distant metamers were observed during follow-up. VP using Kryptonite bone cement is a helpful procedure that allows complete and long-lasting resolution of painful vertebral symptoms. The cost of the material is very high and the rate of disk and venous leakage is too high compared to standard cement.

ISSLS Prize winner: Mechanical influences in progressive intervertebral disc degeneration

STUDY DESIGN

Mechanical study on cadaver motion segments.

OBJECTIVE

To determine whether high gradients of compressive stress within the intervertebral disc are associated with progressive disc degeneration.

SUMMARY OF BACKGROUND DATA

Mechanical loading can initiate disc degeneration but may be unimportant in disease progression, because degenerative changes cause the disc to be increasingly "stress-shielded" by the neural arch. However, the most typical feature of advanced disc degeneration (delamination and collapse of the annulus) may not depend on absolute values of compressive stress but on gradients of compressive stress that act to shear annulus lamellae.

METHODS

A total of 191 motion segments (T7-T8 to L5-S1) were dissected from 42 cadavers aged 19 to 92 years. Each was subjected to approximately 1 kN compression, while intradiscal stresses were measured by pulling a pressure transducer along the disc's midsagittal diameter. "Stress gradients" in the annulus were quantified as the average rate of increase in compressive stress (MPa/mm) between the nucleus and the region of maximum stress in the anterior or posterior annulus. Measurements were repeated before and after creep loading and in simulated flexed and erect postures. Disc degeneration was assessed macroscopically on a scale of 1 to 4.

RESULTS

As grade of disc degeneration increased from 2 to 4, nucleus pressure decreased by an average 68%, and maximum compressive stress in the annulus decreased by 48% to 64%, depending on location and posture. In contrast, stress gradients in the annulus increased by an average 75% in the anterior annulus (in flexed posture) and by 108% in the posterior annulus (in erect posture). Spearman rank correlation showed that these increases were statistically significant.

CONCLUSION

Despite stress-shielding by the neural arch, gradients of compressive stress increase with increasing grade of disc degeneration. Stress gradients act to shear adjacent lamellae and can explain progressive annulus delamination and collapse.

LEVEL OF EVIDENCE

N/A.

Vertebroplasty increases compression of adjacent IVDs and vertebrae in osteoporotic spines

BACKGROUND CONTEXT

Approximately 25% of vertebroplasty patients experience subsequent fractures within 1 year of treatment, and vertebrae adjacent to the cemented level are up to three times more likely to fracture than those further away. The increased risk of adjacent fractures postaugmentation raises concerns that treatment of osteoporotic compression fractures with vertebroplasty may negatively impact spine biomechanics.

PURPOSE

To quantify the biomechanical effects of vertebroplasty on adjacent intervertebral discs (IVDs) and vertebral bodies (VBs).

STUDY DESIGN

A biomechanics study was conducted using cadaveric thoracolumbar spinal columns from elderly women (age range, 51-98 years).

METHODS

Five level motion segments (T11-L3) were assigned to a vertebroplasty treated or untreated control group (n=10/group) such that bone mineral density (BMD), trabecular architecture, and age were similar between groups. Compression fractures were created in the L1 vertebra of all specimens, and polymethylmethacrylate bone cement was injected into the fractured vertebra of vertebroplasty specimens. All spine segments underwent cyclic axial compression for 115,000 cycles. Microcomputed tomography imaging was performed before and after cyclic loading to quantify compression in adjacent VBs and IVDs.

RESULTS

Cyclic loading increased strains 3% on average in the vertebroplasty group when compared with controls after 115,000 cycles. This global strain manifested locally as approximately fourfold more compression in the superior VB (T12) and two- to fourfold higher axial and circumferential deformations in the superior IVD (T12-L1) of vertebroplasty-treated specimens when compared with untreated controls. Low BMD and high cement fill were significant factors that explained the increased strain in the vertebroplasty-treated group.

CONCLUSIONS

These data indicate that vertebroplasty alters spine biomechanics resulting in increased compression of adjacent VB and IVD in severely osteoporotic women and may be the basis for clinical reports of adjacent fractures after vertebroplasty.

Intervertebral disc decompression following endplate damage: implications for disc degeneration depend on spinal level and age

STUDY DESIGN

Mechanical and morphological studies on cadaveric spines.

OBJECTIVE

To explain how spinal level and age influence disc degeneration arising from endplate fracture.

SUMMARY OF BACKGROUND DATA

Disc degeneration can be initiated by damage to a vertebral body endplate, but it is unclear why endplate lesions, and patterns of disc degeneration, vary so much with spinal level and age.

METHODS

One hundred seventy-four cadaveric motion segments, from T7-T8 to L5-S1 and aged 19 to 96 years, were subjected to controlled compressive overload to damage a vertebral body. Stress profilometry was performed before and after damage to quantify changes in intradiscal pressure, and compressive stresses in the annulus. Eighty-six of the undamaged vertebral bodies were then sectioned in the midsagittal plane, and the thickness of the central bony endplate was measured from microradiographs. Regression analysis was used to compare the relative influences of spinal level, age, disc degeneration, and sex on results obtained.

RESULTS

Compressive overload caused endplate fracture at an average force of 3.4 kN, and reduced motion segment height by an average 1.88 mm. Pressure loss in the adjacent nucleus pulposus decreased from 93% at T8-T9 to 38% at L4-L5 (R = 22%, P < 0.001), and increased with age (R = 19%, P < 0.001), especially in male specimens. Stress concentrations in the posterior annulus increased after endplate fracture, with the effect being greatest at upper spinal levels (R = 7%, P < 0.001). Endplate thickness increased by approximately 50% between T11 and L5 (R = 21%, P < 0.001).

CONCLUSION

Endplate fracture creates abnormal stress distributions in the adjacent intervertebral disc, increasing the risk of internal disruption and degeneration. Effects are greatly reduced in the lower lumbar spine, and in young specimens, primarily because of differences in nucleus volume, and materials properties, respectively. Disc degeneration between L4 and S1 may often be unrelated to endplate fracture.

LEVEL OF EVIDENCE

N/A.

Does the cement stiffness affect fatigue fracture strength of vertebrae after cement augmentation in osteoporotic patients?

PURPOSE

Normal progression of osteoporosis or the rigid reinforcement of the fractured vertebral body with polymethyl methacrylate (PMMA) cement is being discussed as a cause for adjacent-level fractures after vertebroplasty. The purpose of this study was to investigate whether augmentation with low stiffness cement can decrease the risk of adjacent-level fractures in low-quality bone.

METHODS

Eighteen female osteoporotic lumbar specimens (L1-L5) were harvested and divided into three groups according to bone mineral density: (I) native; (II) PMMA; (III) modified PMMA (lower stiffness). For the PMMA and modified PMMA groups, a compression fracture was first mechanically induced in L3, and then the fracture received vertebroplasty treatment. The cement stiffness reduction of the modified PMMA group was achieved via an addition of 8 mL of serum to the typical PMMA base. All specimens were exposed to cyclic loading (4 Hz) and a stepwise increasing applied peak force. Cement stiffness was tested according to ISO 5833.

RESULTS

A 51% decrease in cement stiffness was achieved in the modified PMMA group (954 ± 141 vs. 1,937 ± 478 MPa, p < 0.001). Fatigue fracture force (the force level during cyclic loading at which the deformation experienced a sudden increase; FFF) was significantly affected by bone quality (r (2) = 0.39, p = 0.006) and by the initial fracture force (the force necessary to create the initial fracture in L3 prior to augmentation; r (2) = 0.82, p < 0.001). Using initial fracture force as a covariate, the FFF of the modified PMMA group (1,764 ± 49 N) was significantly higher than in the PMMA group (1,544 ± 55 N; p = 0.03).

CONCLUSIONS

A possible method to reduce adjacent-level fractures after vertebroplasty in patients with reduced bone quality could be the use of a lower modulus cement. Therefore, mixing cement with biocompatible fluids could prove useful to tailor cement properties in the operating theater.

Biomechanics of the spine. Part I: spinal stability

Biomechanics, the application of mechanical principles to living organisms, helps us to understand how all the bony and soft spinal components contribute individually and together to ensure spinal stability, and how traumas, tumours and degenerative disorders exert destabilizing effects. Spine stability is the basic requirement to protect nervous structures and prevent the early mechanical deterioration of spinal components. The literature reports a number of biomechanical and clinical definitions of spinal stability, but a consensus definition is lacking. Any vertebra in each spinal motion segment, the smallest functional unit of the spine, can perform various combinations of the main and coupled movements during which a number of bony and soft restraints maintain spine stability. Bones, disks and ligaments contribute by playing a structural role and by acting as transducers through their mechanoreceptors. Mechanoreceptors send proprioceptive impulses to the central nervous system which coordinates muscle tone, movement and reflexes. Damage to any spinal structure gives rise to some degree of instability. Instability is classically considered as a global increase in the movements associated with the occurrence of back and/or nerve root pain. The assessment of spinal instability remains a major challenge for diagnostic imaging experts. Knowledge of biomechanics is essential in view of the increasing involvement of radiologists and neuroradiologists in spinal interventional procedures and the ongoing development of new techniques and devices. Bioengineers and surgeons are currently focusing on mobile stabilization systems. These systems represent a new frontier in the treatment of painful degenerative spine and aim to neutralize noxious forces, restore the normal function of spinal segments and protect the adjacent segments. This review discusses the current concepts of spine stability.

Early or delayed operation, which is more optimal for kyphoplasty? A retrospective study on cement leakage during kyphoplasty

PURPOSE

To retrospectively assess the optimal operating time for kyphoplasty as far as the cement leakage during kyphoplasty is concerned.

MATERIALS AND METHODS

One hundred and six patients with a total of 117 osteoporotic vertebral compression fractures (VCFs) were enrolled in our study. According to the time of kyphoplasty, they were divided into two groups: group 1 (early operation group, who received the operation within 14 days after fracture, n=46) and group 2 (delayed operation group, who received the operation between 15 and 28 days after fracture, n=71). Preoperative and postoperative visual analogue scale (VAS) and Oswestry Disability Index (ODI) scores were compared 3 days after surgery within each group and between the two groups. The radiographic outcomes were evaluated by the restoration rate (RR) of the treated vertebrae. The outcome of cement leakage was assessed after surgery using X-ray and computed tomography (CT) scans. Leaks of cement were classified into three types: those via the basivertebral vein (type B), via the segmental vein (type S) and through a cortical defect (type C).

RESULTS

The mean VAS and ODI scores decreased significantly from pre-surgery to post-surgery in each group, as did the RR (p>0.05). There was no significant difference postoperatively on VAS and ODI scores (p>0.05) between the two groups. However, significant differences were observed postoperatively on RR (p=0.045) and vertebrae with leakage (p=0.038). In addition, there was a significant difference on leakage site of type C between the two groups (p=0.032).

CONCLUSION

Both early and delayed operations of kyphoplasty can achieve satisfactory clinical and radiographic outcomes for osteoporotic VCFs. The risk of cement leakage during kyphoplasty will decrease obviously in delayed operation; so delayed operation, perhaps 2 weeks after fracture, is more safe and optimal than early operation as far as cement leakage is concerned, especially for vertebrae with cortical defects. But early operation of kyphoplasty is more effective in vertebral height restoration.

Intervertebral disc degeneration: evidence for two distinct phenotypes

We review the evidence that there are two types of disc degeneration. 'Endplate-driven' disc degeneration involves endplate defects and inwards collapse of the annulus, has a high heritability, mostly affects discs in the upper lumbar and thoracic spine, often starts to develop before age 30 years, usually leads to moderate back pain, and is associated with compressive injuries such as a fall on the buttocks. 'Annulus-driven' disc degeneration involves a radial fissure and/or a disc prolapse, has a low heritability, mostly affects discs in the lower lumbar spine, develops progressively after age 30 years, usually leads to severe back pain and sciatica, and is associated with repetitive bending and lifting. The structural defects which initiate the two processes both act to decompress the disc nucleus, making it less likely that the other defect could occur subsequently, and in this sense the two disc degeneration phenotypes can be viewed as distinct.

Cementoplasty of bone metastases

Cementoplasty is a palliative treatment for bone metastases. It can be performed alone or in addition to other treatments, such as radiotherapy, radiofrequency ablation or cryotherapy. It is usually performed to reduce pain where the metastases involve the spine and pelvis. It can also be used to stabilise bones in the event of lytic metastases with a risk of fracture. Unlike ablation techniques, it should not be considered a cancer treatment.

Micromechanics of the human vertebral body for forward flexion

To provide mechanistic insight into the etiology of osteoporotic wedge fractures, we investigated the spatial distribution of tissue at the highest risk of initial failure within the human vertebral body for both forward flexion and uniform compression loading conditions. Micro-CT-based linear elastic finite element analysis was used to virtually load 22 human T9 vertebral bodies in either 5° of forward flexion or uniform compression; we also ran analyses replacing the simulated compliant disc (E=8 MPa) with stiff polymethylmethacrylate (PMMA, E=2500 MPa). As expected, we found that, compared to uniform compression, forward flexion increased the overall endplate axial load on the anterior half of the vertebra and shifted the spatial distribution of high-risk tissue within the vertebra towards the anterior aspect of the vertebral body. However, despite that shift, the high-risk tissue remained primarily within the central regions of the trabecular bone and endplates, and forward flexion only slightly altered the ratio of cortical-to-trabecular load sharing at the mid-vertebral level (mean±SD for n=22: 41.3±7.4% compression; 44.1±8.2% forward flexion). When the compliant disc was replaced with PMMA, the anterior shift of high-risk tissue was much more severe. We conclude that, for a compliant disc, a moderate degree of forward flexion does not appreciably alter the spatial distribution of stress within the vertebral body.

Biomechanics of vertebral compression fractures and clinical application

Local biomechanical factors in the etiology of vertebral compression fractures are reviewed. The vertebral body is particularly vulnerable to compression fracture when its bone mineral density (BMD) falls with age. However, the risk of fracture, and the type of fracture produced, does not depend simply on BMD. Equally important is the state of degeneration of the adjacent intervertebral discs, which largely determines how compressive forces are distributed over the vertebral body. Disc height also influences load-sharing between the vertebral body and neural arch, and hence by Wolff's Law can influence regional variations in trabecular density within the vertebral body. Vertebral deformity is not entirely attributable to trauma: it can result from the gradual accumulation of fatigue damage, and can progress by a quasi-continuous process of "creep". Cement injection techniques such as vertebroplasty and kyphoplasty are valuable in the treatment of these fractures. Both techniques can stiffen a fractured vertebral body, and kyphoplasty may contribute towards restoring its height. The presence of cement can limit endplate deformation, and thereby partially reverse the adverse changes in load-sharing which follow vertebral fracture. Cement also reduces time-dependent "creep" deformation of damaged vertebrae.

Effect of vertebral cement augmentation with polymethylmethacrylate on intervertebral disc and bone tissue

Vertebral cement augmentation is reported to be a safe and effective technique for providing stabilization and pain relief. However, adjacent intervertebral discs may be at risk of accelerated degeneration as a result of aggravated nutritional constraints. Therefore, we investigated the effects of injecting polymethylmethacrylate (PMMA) into three adjacent lumbar vertebrae on intervertebral disc and vertebral bone tissue in 12 skeletally mature sheep. After 6 and 12 months of augmentation, the sheep were euthanized and their spines were processes for histological evaluation. Semiquantitative histomorphological analysis of discs and endplates was conducted using published criteria. Histomorphological changes in the augmented bone were assessed qualitatively. Approximately 80% of the length of the endplates was in contact with PMMA. However, there was no significant difference between the histopathological score of the discs adjacent to augmented vertebrae and the score of the control discs. Bone tissue reaction to PMMA was characterized by a thin fibrous tissue layer and occasional foreign-body reactions. New bone formation was present in all augmented vertebrae. Concerns about aggravation of disc degeneration as a result of vertebral cement augmentation seem to be unsubstantiated. Furthermore, adverse effects of PMMA cement on bone biology do not seem to be a relevant issue.

Mechanical function of vertebral body osteophytes, as revealed by experiments on cadaveric spines

STUDY DESIGN

Mechanical testing of cadaveric spines.

OBJECTIVE

To determine whether vertebral body osteophytes act primarily to reduce compressive stress on the intervertebral discs, or to stabilize the spine in bending.

SUMMARY OF BACKGROUND DATA

The mechanical significance of vertebral osteophytes is unclear.

METHODS

Thoracolumbar spines were obtained from cadavers, aged 51 to 92 years, with vertebral body osteophytes, mostly anterolateral. Twenty motion segments, from T5-T6 to L3-L4, were loaded in compression to 1.5 kN, and then in flexion, extension, and lateral bending to 10 to 25 Nm (depending on specimen size) with a compressive preload. Vertebral movements were tracked using an optical 2-dimensional MacReflex system. Tests were performed in random order, and were repeated after excision of all osteophytes. Osteophyte function was inferred from (a) changes in the force or moment resisted and (b) changes in tangent stiffness, measured at maximum displacement or rotation angle. Volumetric bone mineral density (BMD) was measured using dual photon x-ray absorptiometry and water immersion. Results were analyzed using repeated measures analysis of variance.

RESULTS

Resistance to compression was reduced by an average of 17% after osteophyte removal (P < 0.05), and resistance to bending moment in flexion, extension, and left and right lateral bending was reduced by 49%, 36%, 36%, and 35%, respectively (all P < 0.01). Changes in tangent stiffness were similar. Osteophyte removal increased the neutral zone in bending (P < 0.05) and, on average, reduced motion segment BMD by 7% to 9%. Results were insensitive to applied loads and moments, but several changes were proportional to osteophyte size.

CONCLUSION

Vertebral body osteophytes resist bending movements more than compression. Because they reverse the instability in bending that can stimulate their formation, these osteophytes seem to be adaptive rather than degenerative. Results suggest that osteophytes could cause clinical BMD measurements to underestimate vertebral compressive strength.

A clinical comparative study on low versus medium viscosity polymethylmetacrylate bone cement in percutaneous vertebroplasty: viscosity associated with cement leakage

STUDY DESIGN

Comparative, prospective follow-up study.

OBJECTIVE

Comparison of outcome between patients treated with Percutaneous VertebroPlasty (PVP) using low and medium viscosity PolyMethylMetAcrylate (PMMA) bone cement.

SUMMARY OF BACKGROUND DATA

Viscosity is the characterizing parameter of PMMA bone cement, currently the standard augmentation material in PVP, and influences interdigitation, cement distribution inside the vertebral body, injected volume and extravasation, thereby affecting the clinical outcome of PVP. Currently, low, medium, and high viscosity PMMA bone cements are used interchangeably. However, effect of viscosity on clinical outcome in patients with Osteoporotic Vertebral Compression Fractures (OVCFs) has not yet been explicit subject of investigation.

METHODS

Follow-up was conducted using a 0 to 10 Pain Intensity Numerical Rating Scale (PI-NRS) and the Short Form 36 (SF-36) Quality of Life questionnaire before PVP and at 7 days (PI-NRS only), 1, 3, and 12 months after PVP. Injected cement volume, degree of interdigitation, and cement leakage were analyzed on direct postoperative computed tomography scanning. At 6 and 52 weeks and at suspicion, patients were analyzed for new fractures.

RESULTS

A total of 30 consecutive patients received PVP using low viscosity PMMA bone cement (OsteoPal-V) for 62 OVCFs, followed by 34 patients who received PVP using medium viscosity PMMA bone cement (Disc-O-Tech) for 67 OVCFs. Results regarding PI-NRS and SF-36 were comparable between both groups. Postoperative comparison of injected cement volume, degree of interdigitation, proportion of bipedicular procedures, incidence of new vertebral fractures and complications revealed no differences between both groups. Viscosity was identified as a risk factor for the occurrence of cement leakage (yes/no, OR: 2.925, 95% confidence interval: [1.072-7.984], P = 0.036).

CONCLUSION

No major differences in clinical outcome after PVP in OVCFs using low and medium viscosity PMMA bone cement were found. Viscosity of PMMA bone cement was identified as an independent predictor of cement leakage.

The proper volume and distribution of cement augmentation on percutaneous vertebroplasty

OBJECTIVE

The purpose of this study was to determine the optimal volume of injected cement and its distribution when used to treat vertebral compression fractures, and to identify factors related to subsequent vertebral fractures.

METHODS

A retrospective analysis of newly developing vertebral fractures after percutaneous vertebroplasty was done. The inclusion criteria were that the fracture was a single first onset fracture with exclusion of pathologic fractures. Forty-three patients were included in the study with a minimum follow up period of six months. Patients were dichotomized for the analysis by volume of cement, initial vertebral height loss, bone marrow density, and endplate-to-endplate cement augmentation.

RESULTS

None of the four study variables was found to be significantly associated with the occurrence of a subsequent vertebral compression fracture. In particular, and injected cement volume of more or less that 3.5 cc was not associated with occurrence (p = 0.2523). No relation was observed between initial vertebral height loss and bone marrow density (p = 0.1652, 0.2064). Furthermore, endplate-to-endplate cement augmentation was also not found to be significantly associated with a subsequent fracture (p = 0.2860) by Fisher's exact test.

CONCLUSION

Neither volume of cement, initial vertebral height loss, bone marrow density, or endplate-to-endplate cement augmentation was found to be significantly related to the occurrence of a subsequent vertebral compression fracture. Our findings suggest that as much cement as possible without causing leakage should be used.

Vertebral fractures in the elderly may not always be "osteoporotic"

INTRODUCTION

Vertebral fractures in the elderly are often assumed to be "osteoporotic" and require anti-osteoporosis therapy. However, some of these fractures may represent traumatic injuries to vertebrae that have comparatively normal bone mineral density (BMD). We hypothesize that radiographic appearances can be used to differentiate between "osteoporotic" fractures of vertebrae with low BMD and strength, and "traumatic" fractures of vertebrae with normal BMD and strength.

METHODS

73 cadaveric specimens (each comprising two vertebrae with the intervening intervertebral disc and ligaments) were obtained from donors aged 42 to 91 (mean 74) years. Areal BMD was measured in the lateral projection for each vertebral body, using DXA. Each specimen was secured in metal cups containing dental plaster, and compressed to failure at 3mm/s on a computer-controlled materials testing machine. Mechanical failure was detected by a reduction in the gradient of the load-deformation curve. Compressive deformation for each specimen was limited to 4mm in order to prevent gross destruction of the vertebra. Radiographs, obtained before and after mechanical loading, were assessed by an experienced radiologist (GJ) who was blinded to BMD and mechanical data. The algorithm-based qualitative method (ABQ) was used to assign each specimen to two possible outcomes: no discernible fracture of either vertebra, or fracture. The latter were further classified into specimens with osteoporotic fracture and those with traumatic fracture, by applying additional criteria for differential diagnosis. The relationship of failure load to BMD was tested using correlation. BMD and failure load for the three diagnostic outcomes were compared using one-way analysis of variance (ANOVA).

RESULTS

Failure load was proportional to BMD (R=0.63, p<0.001). "Osteoporotic," "traumatic" and "no discernible" fractures were reported in 16, 26 and 31 specimens respectively. "Traumatic" fracture specimens had higher BMD and failed at higher loads than "osteoporotic" fracture specimens (p<0.05).

CONCLUSIONS

Some vertebral fractures in the elderly may be traumatic rather than osteoporotic in origin. Our radiological criteria help to differentiate between them.

Vertebroplasty and Kyphoplasty Can Restore Normal Spine Mechanics following Osteoporotic Vertebral Fracture

Osteoporotic vertebral fractures often lead to pain and disability. They can be successfully treated, and possibly prevented, by injecting cement into the vertebral body, a procedure known as vertebroplasty. Kyphoplasty is similar, except that an inflatable balloon is used to restore vertebral body height before cement is injected. These techniques are growing rapidly in popularity, and a great deal of recent research, reviewed in this paper, has examined their ability to restore normal mechanical function to fractured vertebrae. Fracture reduces the height and stiffness of a vertebral body, causing the spine to assume a kyphotic deformity, and transferring load bearing to the neural arch. Vertebroplasty and kyphoplasty are equally able to restore vertebral stiffness, and restore load sharing towards normal values, although kyphoplasty is better at restoring vertebral body height. Future research should optimise these techniques to individual patients in order to maximise their beneficial effects, while minimising the problems of cement leakage and adjacent level fracture.

Augmentation improves human cadaveric vertebral body compression mechanics for lumbar total disc replacement

STUDY DESIGN

Cadaveric biomechanical study.

OBJECTIVE

To quantify the effects of vertebral body augmentation on biomechanics under axial compression by a total disc replacement (TDR) implant.

SUMMARY OF BACKGROUND DATA

TDR is a surgical alternative to lumbar spinal fusion to treat degenerative disc disease. Osteoporosis in the adjacent vertebrae to the interposed TDR may lead to implant subsidence or vertebral body fracture. Vertebral augmentation is used to treat osteoporotic compression fracture. This study sought to evaluate whether vertebral augmentation improves biomechanics under TDR axial loading.

METHODS

Forty-five L1-L5 lumbar vertebral body segments with intact posterior elements were used. Peripheral quantitative computed tomography scans were performed to determine bone density, and specimens were block-randomized by bone density into augmentation and control groups. A semiconstrained keeled lumbar disc replacement device was implanted, providing 50% endplate coverage. Vertebral augmentation of 17.6% +/- 0.9% vertebral volume fill with Cortoss was performed on the augmentation group. All segments underwent axial compression at a rate of 0.2 mm/s to 6 mm.

RESULTS

The load-displacement response for all specimens was nonlinear. Subfailure mechanical properties with augmentation were significantly different from control; in all cases, the augmented group was 2 times higher than control. At failure, the maximum load and stiffness with augmentation was not significantly different from control. The maximum apparent stress and modulus with augmentation were 2 times and 1.3 times greater than control, respectively. The subfailure stress and apparent modulus with augmentation were moderately correlated with bone density whereas the control subfailure properties were not. The augmented maximum stress was not correlated with bone density, whereas the control was weakly correlated. The maximum apparent modulus was moderately correlated with bone density for both the augmented and the control groups.

CONCLUSION

Augmentation improved the mechanical properties of the lumbar vertebral body for compression by a TDR implant.