Mussel-inspired polydopamine for bio-surface functionalization

Magnetically responsive micro-clustered calcium phosphate-reinforced cell-laden microbead sodium alginate hydrogel for accelerated osteogenic tissue regeneration

The rising prevalence of bone injuries has increased the demand for minimally invasive treatments. Microbead hydrogels, renowned for cell encapsulation, provide a versatile substrate for bone tissue regeneration. They deliver bioactive agents, support cell growth, and promote osteogenesis, aiding bone repair and regeneration. In this study, we synthesized superparamagnetic iron oxide nanoparticles (Sp) coated with a calcium phosphate layer (m-Sp), achieving a distinctive flower-like micro-cluster morphology. Subsequently, sodium alginate (SA) microbead hydrogels containing m-Sp (McSa@m-Sp) were fabricated using a dropping gelation strategy. McSa@m-Sp is magnetically targetable, enhance cross-linking, control degradation rates, and provide strong antibacterial activity. Encapsulation studies with MC3T3-E1 cells revealed enhanced viability and proliferation. These studies also indicated significantly elevated alkaline phosphatase (ALP) activity and mineralization in MC3T3-E1 cells, as confirmed by Alizarin Red S (ARS) and Von Kossa staining, along with increased collagen production within the McSa@m-Sp microbead hydrogels. Immunocytochemistry (ICC) and gene expression studies supported the osteoinductive potential of McSa@m-Sp, showing increased expression of osteogenic markers including RUNX-2, collagen-I, osteopontin, and osteocalcin. Thus, McSa@m-Sp microbead hydrogels offer a promising strategy for multifunctional scaffolds in bone tissue engineering.

Smart self-defensive coatings with bacteria-triggered antimicrobial response for medical devices

Bacterial colonization and biofilm formation on medical devices represent one of the most urgent and critical challenges in modern healthcare. These issues not only pose serious threats to patient health by increasing the risk of infections but also exert a considerable economic burden on national healthcare systems due to prolonged hospital stays and additional treatments. To address this challenge, there is a need for smart, customized biomaterials for medical device fabrication, particularly through the development of surface modification strategies that prevent bacterial adhesion and the growth of mature biofilms. This review explores three bioinspired approaches through which antibacterial and antiadhesive coatings can be engineered to exhibit smart, stimuli-responsive features. This responsiveness is greatly valuable as it provides the coatings with a controlled, on-demand antibacterial response that is activated only in the presence of bacteria, functioning as self-defensive coatings. Such coatings can be designed to release antibacterial agents or change their surface properties/conformation in response to specific stimuli, like changes in pH, temperature, or the presence of bacterial enzymes. This targeted approach minimizes the risk of developing antibiotic resistance and reduces the need for continuous, high-dose antibacterial treatments, thereby preserving the natural microbiome and further reducing healthcare costs. The final part of the review reports a critical analysis highlighting the potential improvements and future evolutions regarding antimicrobial self-defensive coatings and their validation.

Highly aligned electroactive ultrafine fibers promote the differentiation of mesenchymal stem cells into Schwann-like cells for nerve regeneration

This study investigates the efficacy of a novel tissue-engineered scaffold for nerve repair and functional reconstruction following injury. Utilizing stable jet electrospinning, we fabricated aligned ultrafine fibers from dopamine and poly(L-lactic acid) (PLLA), further developing a biomimetic, oriented, and electroactive scaffold comprising poly(pyrrole) (PPy), polydopamine (PDA), and PLLA through dual in situ polymerizations. The scaffold demonstrated enhanced cell adhesion and reactive oxygen species (ROS) scavenging capabilities and promoted the differentiation of mesenchymal stem cells (MSCs) into Schwann-like cells, essential for nerve regeneration. In vivo assessments revealed significant peripheral nerve regeneration in 10 mm sciatic nerve defects in rats, with observations made 12 weeks post-transplantation. This included facilitated myelination and increased muscle density on the injured side, leading to improved motor function recovery. Our results suggest that the aligned PPy/PDA/PLLA fibrous scaffold offers a promising approach for promoting the differentiation of MSCs into Schwann-like cells conducive to nerve regeneration and represents a significant advancement in nerve repair technologies. This study provides a foundational basis for future research into tissue-engineered solutions for nerve damage, potentially impacting clinical strategies for nerve reconstruction.

Polydopamine Interfacial Coating for Stable Tumor-on-a-Chip Models: Application for Pancreatic Ductal Adenocarcinoma

Addressing current challenges in solid tumor research requires advanced in vitro three-dimensional (3D) cellular models that replicate the inherently 3D architecture and microenvironment of tumor tissue, including the extracellular matrix (ECM). However, tumor cells exert mechanical forces that can disrupt the physical integrity of the matrix in long-term 3D culture. Therefore, it is necessary to find the optimal balance between cellular forces and the preservation of matrix integrity. This work proposes using polydopamine (PDA) coating for 3D microfluidic cultures of pancreatic cancer cells to overcome matrix adhesion challenges to sustain representative tumor 3D cultures. Using PDA's distinctive adhesion and biocompatibility, our model uses type I collagen hydrogels seeded with different pancreatic cancer cell lines, prompting distinct levels of matrix deformation and contraction. Optimizing the PDA coating enhances the adhesion and stability of collagen hydrogels within microfluidic devices, achieving a balance between the disruptive forces of tumor cells on matrix integrity and the maintenance of long-term 3D cultures. The findings reveal how this tension appears to be a critical determinant in spheroid morphology and growth dynamics. Stable and prolonged 3D culture platforms are crucial for understanding solid tumor cell behavior, dynamics, and responses within a controlled microenvironment. This advancement ultimately offers a powerful tool for drug screening, personalized medicine, and wider cancer therapeutics strategies.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Mussel-Derived and Bioclickable Peptide Mimic for Enhanced Interfacial Osseointegration via Synergistic Immunomodulation and Vascularized Bone Regeneration

Inadequate osseointegration at the interface is a key factor in orthopedic implant failure. Mechanistically, traditional orthopedic implant interfaces fail to precisely match natural bone regeneration processes in vivo. In this study, a novel biomimetic coating on titanium substrates (DPA-Co/GFO) through a mussel adhesion-mediated ion coordination and molecular clicking strategy is engineered. In vivo and in vitro results confirm that the coating exhibits excellent biocompatibility and effectively promotes angiogenesis and osteogenesis. Crucially, the biomimetic coating targets the integrin α2β1 receptor to promote M2 macrophage polarization and achieves a synergistic effect between immunomodulation and vascularized bone regeneration, thereby maximizing osseointegration at the interface. Mechanical push-out tests reveal that the pull-out strength in the DPA-Co/GFO group is markedly greater than that in the control group (79.04 ± 3.20 N vs 31.47 ± 1.87 N, P < 0.01) and even surpasses that in the sham group (79.04 ± 3.20 N vs 63.09 ± 8.52 N, P < 0.01). In summary, the novel biomimetic coating developed in this study precisely matches the natural process of bone regeneration in vivo, enhancing interface-related osseointegration and showing considerable potential for clinical translation and applications.

Polydopamine-Modified Liposomes: Preparation and Recent Applications in the Biomedical Field

Polydopamine (PDA) is a bioinspired polymer that has unique and desirable properties for emerging applications in the biomedical field, such as extraordinary adhesiveness, extreme ease of functionalization, great biocompatibility, large drug loading capacity, good mucopenetrability, strong photothermal capacity, and pH-responsive behavior. Liposomes are consolidated and attractive biomimetic nanocarriers widely used in the field of drug delivery for their biocompatibility and biodegradability, as well as for their ability to encapsulate hydrophobic, hydrophilic, and amphiphilic compounds, even simultaneously. In addition, liposomes can be decorated with appropriate functionalities for targeted delivery purposes. Thus, combining the interesting properties of PDA with those of liposomes allows us to obtain multifunctional nanocarriers with enhanced stability, biocompatibility, and functionality. In this review, a focus on the most recent developments of liposomes modified with PDA, either in the form of polymer layers trapping multiple vesicles or in the form of PDA-coated nanovesicles, is proposed. These innovative PDA coatings extend the application range of liposomes into the field of biomedical applications, thereby allowing for easier functionalization with targeting ligands, which endows them with active release capabilities and photothermal activity and generally improves their interaction with biological fluids. Therefore, hybrid liposome/PDA systems are proposed for surface-mediated drug delivery and for the development of nanocarriers intended for systemic and oral drug delivery, as well as for multifunctional nanocarriers for cancer therapy. The main synthetic strategies for the preparation of PDA-modified liposomes are also illustrated. Finally, future prospects for PDA-coated liposomes are discussed, including the suggestion of potential new applications, deeper evaluation of side effects, and better personalization of medical treatments.

Oxidative Coupling and Self-Assembly of Polyphenols for the Development of Novel Biomaterials

In recent years, the development of biomaterials from green organic sources with nontoxicity and hyposensitivity has been explored for a wide array of biotherapeutic applications. Polyphenolic compounds have unique structural features, and self-assembly by oxidative coupling allows molecular species to rearrange into complex biomaterial that can be used for multiple applications. Self-assembled polyphenolic structures, such as hollow spheres, can be designed to respond to various chemical and physical stimuli that can release therapeutic drugs smartly. The self-assembled metallic-phenol network (MPN) has been used for modulating interfacial properties and designing biomaterials, and there are several advantages and challenges associated with such biomaterials. This review comprehensively summarizes current challenges and prospects of self-assembled polyphenolic hollow spheres and MPN coatings and self-assembly for biomedical applications.

BacteSign: Building a Findable, Accessible, Interoperable, and Reusable (FAIR) Database for Universal Bacterial Identification

With the increasing incidence of diverse global bacterial outbreaks, it is important to build an immutable decentralized database that can capture regional changes in bacterial resistance with time. Herein, we investigate the use of a rapid 3D printed µbiochamber with a laser-ablated interdigitated electrode developed for biofilm analysis of Pseudomonas aeruginosa, Acinetobacter baumannii and Bacillus subtilis using electrochemical biological impedance spectroscopy (EBIS) across a 48 h spectrum, along with novel ladder-based minimum inhibitory concentration (MIC) stencil tests against oxytetracycline, kanamycin, penicillin G and streptomycin. Furthermore, in this investigation, a search query database has been built demonstrating the deterministic nature of the bacterial strains with real and imaginary impedance, phase, and capacitance, showing increased bacterial specification selectivity in the 9772.37 Hz range.

Bovine serum albumin-modified 3D printed alginate dialdehyde-gelatin scaffolds incorporating polydopamine/SiO2-CaO nanoparticles for bone regeneration

Three-dimensional (3D) printing allows precise manufacturing of bone scaffolds for patient-specific applications and is one of the most recently developed and implemented technologies. In this study, bilayer and multimaterial alginate dialdehyde-gelatin (ADA-GEL) scaffolds incorporating polydopamine (PDA)/SiO2-CaO nanoparticle complexes were 3D printed using a pneumatic extrusion-based 3D printing technology and further modified on the surface with bovine serum albumin (BSA) for application in bone regeneration. The morphology, chemistry, and in vitro bioactivity of PDA/SiO2-CaO nanoparticle complexes were characterized (n = 3) and compared with those of mesoporous SiO2-CaO nanoparticles. Successful deposition of the PDA layer on the surface of the SiO2-CaO nanoparticles allowed better dispersion in a liquid medium and showed enhanced bioactivity. Rheological studies (n = 3) of ADA-GEL inks consisting of PDA/SiO2-CaO nanoparticle complexes showed results that may indicate better injectability and printability behavior compared to ADA-GEL inks incorporating unmodified nanoparticles. Microscopic observations of 3D printed scaffolds revealed that PDA/SiO2-CaO nanoparticle complexes introduced additional topography onto the surface of 3D printed scaffolds. Additionally, the modified scaffolds were mechanically stable and elastic, closely mimicking the properties of natural bone. Furthermore, protein-coated bilayer scaffolds displayed controllable absorption and biodegradation, enhanced bioactivity, MC3T3-E1 cell adhesion, proliferation, and higher alkaline phosphatase (ALP) activity (n = 3) compared to unmodified scaffolds. Consequently, the present results confirm that ADA-GEL scaffolds incorporating PDA/SiO2-CaO nanoparticle complexes modified with BSA offer a promising approach for bone regeneration applications.

Green-Synthesized Silver Nanoparticles in the Prevention of Multidrug-Resistant Proteus mirabilis Infection and Incrustation of Urinary Catheters BioAgNPs Against P. mirabilis Infection

This study aimed to assess the activity of AgNPs biosynthesized by Fusarium oxysporum (bio-AgNPs) against multidrug-resistant uropathogenic Proteus mirabilis, and to assess the antibacterial activity of catheters coated with bio-AgNPs. Broth microdilution and time-kill kinetics assays were used to determine the antibacterial activity of bio-AgNPs. Catheters were coated with two (2C) and three (3C) bio-AgNPs layers using polydopamine as crosslinker. Catheters were challenged with urine inoculated with P. mirabilis to assess the anti-incrustation activity. MIC was found to be 62.5 µmol l-1, causing total loss of viability after 4 h and bio-AgNPs inhibited biofilm formation by 76.4%. Catheters 2C and 3C avoided incrustation for 13 and 20 days, respectively, and reduced biofilm formation by more than 98%, while the pristine catheter was encrusted on the first day. These results provide evidence for the use of bio-AgNPs as a potential alternative to combat of multidrug-resistant P. mirabilis infections.

Polydopamine-Modified Titanium Dioxide Nanotube Arrays Doped with Calcium as a Sustained Drug Delivery System

Titanium nanotube (TNT) arrays manufactured via electrochemical anodization have been widely used as local drug carriers due to their excellent biocompatibility and customizable nanotubular structures. However, the uncontrollable and abrupt drug release at the early stage decreases the drug release duration, leading to excessive drug concentration at the implantation site. In this study, a continuous drug delivery system based on TNTs was created. Initially, a basic ultrasound-assisted approach was utilized to deposit a polydopamine (PDA) coating onto TNTs to obtain PDA-modified TNTs. Next, TNTs-PDA were submerged in a calcium chloride solution to include Ca2+ through Ca2+ coordination between the PDA layer's catechol groups. Sodium alendronate (NaAL) was used as a model drug and loaded onto TNTs-PDA-Ca2+ by immersing them in an NaAL solution. In the final step, NaAL was covalently attached to TNTs-PDA-Ca2+ through coordination bonds with Ca2+. The samples underwent characterization through the use of various techniques, including field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction patterning, X-ray photoelectron spectroscopy, and inductively coupled plasma emission spectrometry. The results indicated that the bioactivity of TNTs improved, and there was an enhancement in drug loading capacity and release performance due to modification with PDA and Ca2+. Furthermore, acidic conditions can cause significant drug release due to the cleavage of coordination bonds between the drug and Ca2+ ions. Thus, the aforementioned drug delivery system represents a potentially promising approach for achieving sustained and controllable drug release.

Injectable Nanoengineered Adhesive Hydrogel for Treating Enterocutaneous Fistulas

Enterocutaneous fistula (ECF) is a severe medical condition where an abnormal connection forms between the gastrointestinal tract and skin. ECFs are, in most cases, a result of surgical complications such as missed enterotomies or anastomotic leaks. The constant leakage of enteric and fecal contents from the fistula site leads to skin breakdown and increases the risk of infection. Despite advances in surgical techniques and postoperative management, ECF accounts for significant mortality rates, estimated between 15-20%, and causes debilitating morbidity. Therefore, there is a critical need for a simple and effective method to seal and heal ECF. Injectable hydrogels with combined properties of robust mechanical properties and cell infiltration/proliferation have the potential to block and heal ECF. Herein, we report the development of an injectable nanoengineered adhesive hydrogel (INAH) composed of a synthetic nanosilicate (Laponite®) and a gelatin-dopamine conjugate for treating ECF. The hydrogel undergoes fast cross-linking using a co-injection method, resulting in a matrix with improved mechanical and adhesive properties. INAH demonstrates appreciable blood clotting abilities and is cytocompatible with fibroblasts. The adhesive properties of the hydrogel are demonstrated in ex vivo adhesion models with skin and arteries, where the volume stability in the hydrated internal environment facilitates maintaining strong adhesion. In vivo assessments reveal that the INAH is biocompatible, supporting cell infiltration and extracellular matrix deposition while not forming fibrotic tissue. These findings suggest that this INAH holds promising translational potential for sealing and healing ECF.

Mussel-Inspired Cation-π Interactions: Wet Adhesion and Biomimetic Materials

Cation-π interaction is one of the most important noncovalent interactions identified in biosystems, which has been proven to play an essential role in the strong adhesion of marine mussels. In addition to the well-known catecholic amino acid, l-3,4-dihydroxyphenylalanine, mussel foot proteins are rich in various aromatic moieties (e.g., tyrosine, phenylalanine, and tryptophan) and cationic residues (e.g., lysine, arginine, and histidine), which favor a series of short-range cation-π interactions with adjustable strengths, serving as a prototype for the development of high-performance underwater adhesives. This work highlights our recent advances in understanding and utilizing cation-π interactions in underwater adhesives, focusing on three aspects: (1) the investigation of the cation-π interaction mechanisms in mussel foot proteins via force-measuring techniques; (2) the modulation of cation-π interactions in mussel mimetic polymers with the variation of cations, anions, and aromatic groups; (3) the design of wet adhesives based on these revealed principles, leading to functional materials in the form of films, coacervates, and hydrogels with biomedical and engineering applications. This review provides valuable insights into the development and optimization of smart materials based on cation-π interactions.

Synthesis of catechol-amine coating solution for membrane surface modification

Recently, the plant polyphenols have attracted much attention for membrane modification, especially in surface coating application. In this study, the synthesis of catechol-amine coating solutions was evaluated at different pH conditions and with different concentrations of tannic acid and tetraethylenepentamine in order to determine the relationship between chemical structure and mechanism in the oxidation reaction. The reactivity of catechol and amine groups in the formulation was measured using UV-Vis spectroscopy and observation of the change in colour of the coating solutions. Then, the deposition of catechol-amine coating solutions was applied onto the hydrophobic polyvinylidene fluoride (PVDF) membrane. The formulation results show significant differences in alkaline conditions, revealing the role of catechol groups in the oxidation of polyphenolics. The reactions of quinone and amines to form crosslinks by Michael addition and Schiff base reactions were observed at different concentrations of each compound in coating solution. In addition, the negative charge of hydrophilic and underwater oleophobic-coated PVDF membrane was confirmed by surface zeta potential analysis. The morphological surface of modified membrane is rougher due to that coating deposition was also examined using scanning electron microscopy (SEM). Furthermore, the performance of modified membrane is comparable with the commercial hydrophilic membrane in terms of fluxes and separation efficiency of emulsion solution.

Mussel-Inspired Calcium Alginate/Polyacrylamide Dual Network Hydrogel: A Physical Barrier to Prevent Postoperative Re-Adhesion

Intrauterine adhesions (IUA) has become one of the main causes of female infertility. How to effectively prevent postoperative re-adhesion has become a clinical challenge. In this study, a mussel-inspired dual-network hydrogel was proposed for the postoperative anti-adhesion of IUA. First, a calcium alginate/polyacrylamide (CA-PAM) hydrogel was prepared via covalent and Ca2+ cross-linking. Benefiting from abundant phenolic hydroxyl groups, polydopamine (PDA) was introduced to further enhance the adhesion ability and biocompatibility. This CA-PAM hydrogel immersed in 10 mg/mL dopamine solution possessed remarkable mechanical strength (elastic modulus > 5 kPa) and super stretchability (with a breaking elongation of 720%). At the same time, it showed excellent adhesion (more than 6 kPa). Surprisingly, the coagulation index of the hydrogel was 27.27 ± 4.91, demonstrating attractive coagulation performance in vitro and the potential for rapid hemostasis after surgery.

Synthesis, Characterization, and Induced Osteogenic Differentiation Effect of Collagen Membranes Functionalized by Polydopamine/Graphene Oxide for Bone Tissue Engineering

Collagen is one of the most common natural absorbable polymers, which is widely used as a barrier membrane in biomedical fields due to its many desirable biological properties. However, absorbable membranes such as collagen have their own disadvantages such as unpredictable degradation rates, poor rigidity leading to tissue collapse, and limited osteogenic properties and cell adhesion. In this study, a modified collagen membrane with a polydopamine-graphene oxide (PDA/GO) complex was synthesized to improve the characteristics of collagen for bone tissue engineering. The successful synthesis of PDA/GO on collagen membranes was verified using X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The wettability of PDA/GO-modified collagen membranes was considerably improved based on the characterization by water contact angle compared to the uncoated membranes and surface coatings solely by either PDA or GO. The modified PDA/GO coating also enhanced the mechanical properties such as tensile strength and biodegradation rate of collagen membranes. In addition, the PDA/GO coating effectively enhanced the biocompatibility of collagen membranes as verified by the enhanced proliferation and adhesion of human bone marrow stem cells (hBMSCs). Additionally, the effects of PDA/GO coating on the osteogenic differentiation of hBMSCs on collagen membranes were investigated through alkaline phosphatase (ALP) activity and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). The PDA/GO coating on collagen membranes resulted in a significant increase in osteogenic properties compared with the uncoated collagen membranes. According to the results of the current study, the combination of PDA and GO-modified collagen membranes could be used for bone tissue engineering and biomedical applications.

2D and 3D Micropatterning of Mussel-Inspired Functional Materials by Direct Laser Writing

This work addresses the critical need for multifunctional materials and substrate-independent high-precision surface modification techniques that are essential for advancing microdevices and sensing elements. To overcome existing limitations, the versatility of mussel-inspired materials (MIMs) is combined with state-of-the-art multiphoton direct laser writing (DLW) microfabrication. In this way, 2D and 3D MIM microstructures of complex designs are demonstrated with sub-micron to micron resolution and extensive post-functionalization capabilities. This study includes polydopamine (PDA), mussel-inspired linear, and dendritic polyglycerols (MI-lPG and MI-dPG), allowing their direct microstructure on the substrate of choice with the option to tailor the patterned topography and morphology in a controllable manner. The functionality potential of MIMs is demonstrated by successfully immobilizing and detecting single-stranded DNA on MIM micropattern and nanoarray surfaces. In addition, easy modification of MIM microstructure with silver nanoparticles without the need of any reducing agent is shown. The methodology developed here enables the integration of MIMs in advanced applications where precise surface functionalization is essential.

Polydopamine modification of polydimethylsiloxane for multifunctional biomaterials: Immobilization and stability of albumin and fetuin-A on modified surfaces

The surface of polydimethylsiloxane (PDMS) can be modified to immobilize proteins; however, most existing approaches are limited to complex reactions and achieving multifunctional modifications is challenging. This work applies a simple technique to modify PDMS using polydopamine (PDA) and investigates immobilization of multiple proteins. The surfaces were characterized in detail and stability was assessed, demonstrating that in a buffer solution, PDA modification was maintained without an effect on surface properties. Bovine serum albumin (BSA) and bovine fetuin-A (Fet-A) were used as model biomolecules for simultaneous or sequential immobilization and to understand their use for surface backfilling and functionalization. Based on 125I radiolabeling, amounts of BSA and Fet-A on PDA were determined to be close to double that were obtained on control PDMS surfaces. Following elution with sodium dodecyl sulfate, around 67% of BSA and 63% of Fet-A were retained on the surface. The amount of immobilized protein was influenced by the process (simultaneous or sequential) and surface affinity of the proteins. With simultaneous modification, a balanced level of both proteins could be achieved, whereas with the sequential process, the initially immobilized protein was more strongly attached. After incubation with plasma and fetal bovine serum, the PDA-modified surfaces maintained over 90% of the proteins immobilized. This demonstrates that the biological environments also play an important role in the binding and stability of conjugated proteins. This combination of PDA and surface immobilization methods provides fundamental knowledge for tailoring multifunctional PDMS-based biomaterials with applications in cell-material interactions, biosensing, and medical devices.

Development of polydopamine functionalized porous starch for bleeding control with the assistance of NIR light

Efficient hemorrhage control of severe wound injuries is an urgent medical need, deserving agents with promising blood coagulation and biocompatible characteristics. Current work developed polydopamine (PDA) functionalized porous starch powder (PS-PDA) for emergency bleeding treatment. The micro-morphology and elements, chemical groups, and porosity of PS-PDA were systematically characterized. Its comparison with porous starch (PS) revealed the promising potential of this composite in medical practice. On one hand, PS-PDA showed superior surface area and biomineralization affinity over PS, along with comparable hemo/cyto-compatibility. On the other hand, the photothermal effect of PDA under near Infrared (NIR) light paved the possibility to accelerate blood coagulation in situ. In vivo studies indicated PS-PDA can significantly reduce blood loss and improvement of hemostasis efficiency accompanied by NIR light exposure. These results suggest that this newly developed PS-PDA powder can serve as a promising hemostatic material for bleeding wound control.

Mussel-Inspired Nanocellulose Coating for Selective Neodymium Recovery

Neodymium (Nd) is one of the most in-demand rare earth elements (REEs) for developing the next generation of magnetic medical devices and clean energy. Eco-friendly and sustainable nanotechnology for REE recovery may be highly suitable to address the limited global supply while minimizing the environmental footprints of current practice, such as solvent extraction. Here, we present a novel one-step mussel-inspired nanocellulose coating (MINC) using bifunctional hairy cellulose nanocrystals (BHCNC), bearing dialdehyde and dicarboxylate groups. The dialdehyde groups enable dopamine-mediated orthogonal conjugation of BHCNC to substrates, such as microparticles, while the high content of dicarboxylate groups yields high-capacity and selective Nd removal against ferric, calcium, and sodium ions. To the best of our knowledge, the MINC-treated substrate provides the most rapid selective removal and recovery of Nd ions even at low Nd concentrations with a capacity that is among the highest reported values. We envision that the MINC will provide new opportunities in developing next-generation bio-based materials and interfaces for the sustainable recovery of REEs and other precious elements.

Unlocking the Potential of Molecularly Imprinted Polydopamine in Sensing Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors that mimic the specificity of biological antibody-antigen interactions. By using a "lock and key" process, MIPs selectively bind to target molecules that were used as templates during polymerization. While MIPs are typically prepared using conventional monomers, such as methacrylic acid and acrylamide, contemporary advancements have pivoted towards the functional potential of dopamine as a novel monomer. The overreaching goal of the proposed review is to fully unlock the potential of molecularly imprinted polydopamine (MIPda) within the realm of cutting-edge sensing applications. This review embarks by shedding light on the intricate tapestry of materials harnessed in the meticulous crafting of MIPda, endowing them with tailored properties. Moreover, we will cover the diverse sensing applications of MIPda, including its use in the detection of ions, small molecules, epitopes, proteins, viruses, and bacteria. In addition, the main synthesis methods of MIPda, including self-polymerization and electropolymerization, will be thoroughly examined. Finally, we will examine the challenges and drawbacks associated with this research field, as well as the prospects for future developments. In its entirety, this review stands as a resolute guiding compass, illuminating the path for researchers and connoisseurs alike.

Construction of viral protein-based hybrid nanomaterials mediated by a macromolecular glue

A generic strategy to construct virus protein-based hybrid nanomaterials is reported by using a macromolecular glue inspired by mussel adhesion. Commercially available poly(isobutylene-alt-maleic anhydride) (PiBMA) modified with dopamine (PiBMAD) is designed as this macromolecular glue, which serves as a universal adhesive material for the construction of multicomponent hybrid nanomaterials. As a proof of concept, gold nanorods (AuNRs) and single-walled carbon nanotubes (SWCNTs) are initially coated with PiBMAD. Subsequently, viral capsid proteins from the Cowpea Chlorotic Mottle Virus (CCMV) assemble around the nano-objects templated by the negative charges of the glue. With virtually unchanged properties of the rods and tubes, the hybrid materials might show improved biocompatibility and can be used in future studies toward cell uptake and delivery.

Challenge of material haemocompatibility for microfluidic blood-contacting applications

Biological applications of microfluidics technology is beginning to expand beyond the original focus of diagnostics, analytics and organ-on-chip devices. There is a growing interest in the development of microfluidic devices for therapeutic treatments, such as extra-corporeal haemodialysis and oxygenation. However, the great potential in this area comes with great challenges. Haemocompatibility of materials has long been a concern for blood-contacting medical devices, and microfluidic devices are no exception. The small channel size, high surface area to volume ratio and dynamic conditions integral to microchannels contribute to the blood-material interactions. This review will begin by describing features of microfluidic technology with a focus on blood-contacting applications. Material haemocompatibility will be discussed in the context of interactions with blood components, from the initial absorption of plasma proteins to the activation of cells and factors, and the contribution of these interactions to the coagulation cascade and thrombogenesis. Reference will be made to the testing requirements for medical devices in contact with blood, set out by International Standards in ISO 10993-4. Finally, we will review the techniques for improving microfluidic channel haemocompatibility through material surface modifications-including bioactive and biopassive coatings-and future directions.

Fully Integrated 3D Microelectrode Arrays with Polydopamine-Mediated Silicon Dioxide Insulation for Electrophysiological Interrogation of a Novel 3D Human, Neural Microphysiological Construct

Advances within in vitro biological system complexity have enabled new possibilities for the "Organs-on-a-Chip" field. Microphysiological systems (MPS) as such incorporate sophisticated biological constructs with custom biological sensors. For microelectromechanical systems (MEMS) sensors, the dielectric layer is critical for device performance, where silicon dioxide (SiO2) represents an excellent candidate due to its biocompatibility and wide utility in MEMS devices. Yet, high temperatures traditionally preclude SiO2 from incorporation in polymer-based BioMEMS. Electron-beam deposition of SiO2 may provide a low-temperature, dielectric serving as a nanoporous MPS growth substrate. Herein, we enable improved adherence of nanoporous SiO2 to polycarbonate (PC) and 316L stainless steel (SS) via polydopamine (PDA)-mediated chemistry. The resulting stability of the combinatorial PDA-SiO2 film was interrogated, along with the nature of the intrafilm interactions. A custom polymer-metal three-dimensional (3D) microelectrode array (3D MEA) is then reported utilizing PDA-SiO2 insulation, for definition of novel dorsal root ganglion (DRG)/nociceptor and dorsal horn (DH) 3D neural constructs in excess of 6 months for the first time. Spontaneous/evoked compound action potentials (CAPs) are successfully reported. Finally, inhibitory drugs treatments showcase pharmacological responsiveness of the reported multipart biological activity. These results represent the initiation of a novel 3D MEA-integrated, 3D neural MPS for the long-term electrophysiological study.

Sustained Release of BMSC-EVs from 3D Printing Gel/HA/nHAP Scaffolds for Promoting Bone Regeneration in Diabetic Rats

Extracellular vesicles (EVs) play an important role in intercellular communication, and the function of EVs mainly depends on the state of source cells. To determine the effect of diabetic microenvironment on EVs secreted by bone marrow mesenchymal stem cells (BMSCs), this work explores the effect of normal glucose (5.5 mm) cultured BMSCs derived EVs (NG-EVs) and high glucose (30 mm) cultured BMSCs derived EVs (HG-EVs) in regulating the migration, proliferation and osteoblastic differentiation of BMSCs in vitro. In order to improve the bioavailability of EVs, this work constructs a sustained release system of polydopamine (PDA) functionalized 3D printing gelatin/hyaluronic acid/nano-hydroxyapatite (Gel/HA/nHAP) scaffolds (S/PDA) and verifies its function in the calvarial defect model of diabetic rats. This work confirms that both NG-EVs and HG-EVs can promote proliferation and migration, inhibit apoptosis and promote osteogenic differentiation, but the function of HG-EVs is weaker than that of NG-EVs. Therefore, EVs secreted by autologous cells of diabetic patients are not suitable for self-repair. This work hopes that the 3D printing scaffold designed for sustained-release EVs will provide a new strategy for acellular tissue engineering bone repair in diabetic patients.

System for Patterning Polydopamine and VAPG Peptide on Polytetrafluoroethylene and Biodegradable Polyesters for Patterned Growth of Smooth Muscle Cells In Vitro

Biomaterial's surface functionalization for selective adhesion and patterned cell growth remains essential in developing novel implantable medical devices for regenerative medicine applications. We built and applied a 3D-printed microfluidic device to fabricate polydopamine (PDA) patterns on the surface of polytetrafluoroethylene (PTFE), poly(l-lactic acid-co-D,l-lactic acid) (PLA), and poly(lactic acid-co-glycolic acid) (PLGA). Then, we covalently attached the Val-Ala-Pro-Gly (VAPG) peptide to the created PDA pattern to promote the adhesion of the smooth muscle cells (SMCs). We proved that the fabrication of PDA patterns allows for the selective adhesion of mouse fibroblast and human SMCs to PDA-patterned surfaces after only 30 min of in vitro cultivation. After 7 days of SMC culture, we observed the proliferation of cells only along the patterns on PTFE but over the entire surface of the PLA and PLGA, regardless of patterning. This means that the presented approach is beneficial for application to materials resistant to cell adhesion and proliferation. The additional attachment of the VAPG peptide to the PDA patterns did not bring measurable benefits due to the high increase in adhesion and patterned cell proliferation by PDA itself.

Mussel-inspired polydopamine decorated silane modified-electroconductive gelatin-PEDOT:PSS scaffolds for bone regeneration

This study seeks to simulate both the chemistry and piezoelectricity of bone by synthesizing electroconductive silane-modified gelatin-poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) scaffolds using the freeze drying technique. In order to enhance hydrophilicity, cell interaction, and biomineralization, the scaffolds were functionalized with polydopamine (PDA) inspired by mussels. Physicochemical, electrical, and mechanical analyses were conducted on the scaffolds, as well as in vitro evaluations using the osteosarcoma cell line MG-63. It was found that scaffolds had interconnected porous structures, so the PDA layer formation reduced the size of pores while maintaining scaffold uniformity. PDA functionalization reduced the electrical resistance of the constructs while improving their hydrophilicity, compressive strength, and modulus. As a result of the PDA functionalization and the use of silane coupling agents, higher stability and durability were achieved as well as an improvement in biomineralization capability after being soaked in SBF solution for a month. Additionally, the PDA coating enabled the constructs to enhance viability, adhesion, and proliferation of MG-63 cells, as well as to express alkaline phosphatase and deposit HA, indicating that scaffolds can be used for bone regeneration. Therefore, the PDA-coated scaffolds developed in this study and the non-toxic performance of PEDOT:PSS present a promising approach for further in vitro and in vivo studies.

Polydopamine conjugated SiO2 nanoparticles as potential drug carriers for melanoma treatment

Silica nanoparticles (SiO₂) are increasingly investigated for biomedical applications. Aim: This study aimed to analyze the potential use of a SiO₂ nanoparticles coated with biocompatible polydopamine (SiO₂@PDA) as a potential chemotherapeutic drug carrier. Materials & methods: SiO₂ morphology and PDA adhesion was analyzed by dynamic light scattering, electron microscopy and nuclear magnetic resonance. Cytotoxicity studies and morphology analyses (immunofluorescence, scanning and transmission electron microscopy) were used to assess the cellular reaction to the SiO₂@PDA nanoparticles and to identify a biocompatible (safe use) window. Results & conclusion: Concentrations above 10 μg/ml and up to 100 μg/ml SiO₂@PDA showed the best biocompatibility on human melanoma cells at 24 h and represent a potential drug carrier template for targeted melanoma cancer treatment.

Designing Bio-Inspired Wet Adhesives through Tunable Molecular Interactions

Marine organisms, such as mussels and sandcastle worms, can master rapid and robust adhesion in turbulent seawater, becoming leading archetypes for the design of underwater adhesives. The adhesive proteins secreted by the organisms are rich in catecholic amino acids along with ionic and amphiphilic moieties, which mediate the adaptive adhesion mainly through catechol chemistry and coacervation process. Catechol allows a broad range of molecular interactions both at the adhesive-substrate interface and within the adhesive matrix, while coacervation promotes the delivery and surface spreading of the adhesive proteins. These natural design principles have been translated to synthetic systems toward the development of biomimetic adhesives with water-resist adhesion and cohesion. This review provides an overview of the recent progress in bio-inspired wet adhesives, focusing on two aspects: (1) the elucidation of the versatile molecular interactions (e.g., electrostatic interactions, metal coordination, hydrogen bonding, and cation-π/anion-π interactions) used by natural adhesives, mainly through nanomechanical characterizations; and (2) the rational designs of wet adhesives based on these biomimetic strategies, which involve catechol-functionalized, coacervation-induced, and hydrogen bond-based approaches. The emerging applications (e.g., tissue glues, surgical implants, electrode binders) of the developed biomimetic adhesives in biomedical, energy, and environmental fields are also discussed, with future research directions proposed.

Supramolecular temperature responsive assembly of polydopamine reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) colloidal systems can directly respond to environmental stimuli such as pH, ionic strength, and light by themselves, but not to temperature. Here we show that surface modification of rGO with polydopamine (PDA) leads to a temperature-responsive composite material, even though neither rGO nor PDA have intrinsic temperature responsiveness. Reducing GO with dopamine results in rGO/PDA flakes with hydrophilic PDA clusters attached to hydrophobic rGO domains, which mimics the amphiphilic structure of temperature responsive poly(N-isopropylacrylamide) (PNIPAM). The rGO/PDA flakes self-assemble at temperature higher than 30 °C, causing flake aggregation and precipitation in suspensions with concentration of 0.05 g L^-1, which is reversible upon cooling, shaking, and re-heating. A solution-to-gelation transition occurs upon heating suspensions with concentration of 10 g L^-1. Nacre-like films and porous monoliths are obtained by drying rGO/PDA suspensions at different concentrations. Films and porous monoliths obtained by drying suspensions that are previously self-assembled through heat have more compact structures compared to those obtained with suspensions that are not heated. Overall, this work introduces the concept of supramolecular temperature responsive assembly of nanomaterials (STRAN), i.e., that temperature response can be introduced in nanomaterials by combining non-responsive components that function cooperatively in supramolecules, whose interactions with solvents can be modulated by temperature changes, mimicking what happens in macromolecular systems such as PNIPAM. STRAN could be applied to nanomaterials beyond GO to develop responsive systems whose self-assembly in suspension and architectural features realized upon drying can be controlled by temperature.

Surface Modification of Oxygenator Fibers with a Catalytically Active Metal-Organic Framework to Generate Nitric Oxide: An Ex Vivo Pilot Study

Coating all portions of an extracorporeal membrane oxygenation (ECMO) circuit with materials exhibiting inherent, permanent antithrombotic properties is an essential step to prevent thrombus-induced complications. However, developing antithrombotic coatings for oxygenator fibers within membrane oxygenators of ECMO systems has proven challenging. We have used polydopamine (PDA) to coat oxygenator fibers and immobilize a Cu-based metal-organic framework (MOF) on the surface to act as a nitric oxide (NO) catalyst. Importantly, the PDA/MOF coating will produce NO indefinitely from endogenous S-nitrosothiols and it has not previously been applied to ECMO oxygenator fibers.

Engineering injectable, biocompatible, and highly elastic bioadhesive cryogels

The extracellular matrix (ECM), an integral component of all organs, is inherently tissue adhesive and plays a pivotal role in tissue regeneration and remodeling. However, man-made three-dimensional (3D) biomaterials that are designed to mimic ECMs do not intrinsically adhere to moisture-rich environments and often lack an open macroporous architecture required for facilitating cellularization and integration with the host tissue post-implantation. Furthermore, most of these constructs usually entail invasive surgeries and potentially a risk of infection. To address these challenges, we recently engineered biomimetic and macroporous cryogel scaffolds that are syringe injectable while exhibiting unique physical properties, including strong bioadhesive properties to tissues and organs. These biomimetic catechol-containing cryogels were prepared from naturally-derived polymers such as gelatin and hyaluronic acid and were functionalized with mussel-inspired dopamine (DOPA) to impart bioadhesive properties. We found that using glutathione as an antioxidant and incorporating DOPA into cryogels via a PEG spacer arm led to the highest tissue adhesion and improved physical properties overall, whereas DOPA-free cryogels were weakly tissue adhesive. As shown by qualitative and quantitative adhesion tests, DOPA-containing cryogels were able to adhere strongly to several animal tissues and organs such as the heart, small intestine, lung, kidney, and skin. Furthermore, these unoxidized (i.e., browning-free) and bioadhesive cryogels showed negligible cytotoxicity toward murine fibroblasts and prevented the ex vivo activation of primary bone marrow-derived dendritic cells. Finally, in vivo data suggested good tissue integration and a minimal host inflammatory response when subcutaneously injected in rats. Collectively, these minimally invasive, browning-free, and strongly bioadhesive mussel-inspired cryogels show great promise for various biomedical applications, potentially in wound healing, tissue engineering, and regenerative medicine.

Accelular nanofibrous bilayer scaffold intrapenetrated with polydopamine network and implemented into a full-thickness wound of a white-pig model affects inflammation and healing process

Treatment of complete loss of skin thickness requires expensive cellular materials and limited skin grafts used as temporary coverage. This paper presents an acellular bilayer scaffold modified with polydopamine (PDA), which is designed to mimic a missing dermis and a basement membrane (BM). The alternate dermis is made from freeze-dried collagen and chitosan (Coll/Chit) or collagen and a calcium salt of oxidized cellulose (Coll/CaOC). Alternate BM is made from electrospun gelatin (Gel), polycaprolactone (PCL), and CaOC. Morphological and mechanical analyzes have shown that PDA significantly improved the elasticity and strength of collagen microfibrils, which favorably affected swelling capacity and porosity. PDA significantly supported and maintained metabolic activity, proliferation, and viability of the murine fibroblast cell lines. The in vivo experiment carried out in a domestic Large white pig model resulted in the expression of pro-inflammatory cytokines in the first 1-2 weeks, giving the idea that PDA and/or CaOC trigger the early stages of inflammation. Otherwise, in later stages, PDA caused a reduction in inflammation with the expression of the anti-inflammatory molecule IL10 and the transforming growth factor β (TGFβ1), which could support the formation of fibroblasts. Similarities in treatment with native porcine skin suggested that the bilayer can be used as an implant for full-thickness skin wounds and thus eliminate the use of skin grafts.

Catechol-Amine-Decorated Epoxy Resin as an Underwater Adhesive: A Coacervate Concept Using a Liquid Marble Strategy

The attachment phenomena of various hierarchical architectures found in nature, especially underwater adhesion, have drawn extensive attention to the development of similar biomimicking adhesives. Marine organisms show spectacular adhesion characteristics because of their foot protein chemistry and the formation of an immiscible phase (coacervate) in water. Herein, we report a synthetic coacervate derived using a liquid marble route composed of catechol amine-modified diglycidyl ether of bisphenol A (EP) polymers wrapped by silica/PTFE powders. The adhesion promotion efficiency of catechol moieties is established by functionalizing EP with monofunctional amines (MFA) of 2-phenyl ethylamine and 3,4-dihydroxy phenylethylamine (DA). The curing activation of MFA-incorporated resin pointed toward a lower activation energy (50.1-52.1 kJ mol^-1) compared with the neat system (56.7-58 kJ mol^-1). The viscosity build-up and gelation are faster for the catechol-incorporated system, making it ideal for underwater bonding performance. The PTFE-based adhesive marble of the catechol-incorporated resin was stable and exhibited an adhesive strength of 7.5 MPa under underwater bonding conditions.

Ultra-stable CsPbBr3@PbBrOH nanorods for fluorescence labeling application based on methylimidazole-assisted synthesis

The extension application of perovskites in aqueous media such as bioassays requires the development of a water-stable perovskite with a simple preparation process and low cost. However, the degradation of perovskites in aqueous solution is still a thorny problem. Here, we develop a methylimidazole-assisted two-step synthesis protocol to prepare CsPbBr₃@PbBrOH nanorods with superior water stability and remarkable optical properties at room temperature. The synergy of 2-methylimidazole (2-MIM), an N-donor ligand, with water can not only facilitate CsPbBr₃ formation and suppress CsPb₂Br₅ or Cs₄PbBr₆ formation, but also promote the formation of a PbBrOH shell capping CsPbBr₃. 2-MIM is ionized into 2-MIM^- in DMF and 2-MIM⁺ in water. They passivated the surface defects and changed the crystallization environment, leading to water-stable CsPbBr₃@PbBrOH. The obtained CsPbBr₃@PbBrOH nanorods can still maintain 91% PL intensity after being stored in water for more than 2 months. Furthermore, the CsPbBr₃@PbBrOH nanorods show excellent stability in polar solvents, water, and phosphate buffer solution in a wide pH range, as well as better thermal and irradiation stability. In addition, the CsPbBr₃@PbBrOH nanorods are further functionalized with polydopamine (PDA) for biomolecular immobilization and immunoassay studies. The resulting assay shows a detection limit of 0.003 ng mL^-1 for IgG detection, illustrating important progress towards expanding fluorescence labeling application of perovskite nanomaterials for immunoassays.

Polydopamine Incorporation Enhances Cell Differentiation and Antibacterial Properties of 3D-Printed Guanosine-Borate Hydrogels for Functional Tissue Regeneration

Tissue engineering focuses on the development of materials as biosubstitutes that can be used to regenerate, repair, or replace damaged tissues. Alongside this, 3D printing has emerged as a promising technique for producing implants tailored to specific defects, which in turn increased the demand for new inks and bioinks. Especially supramolecular hydrogels based on nucleosides such as guanosine have gained increasing attention due to their biocompatibility, good mechanical characteristics, tunable and reversible properties, and intrinsic self-healing capabilities. However, most existing formulations exhibit insufficient stability, biological activity, or printability. To address these limitations, we incorporated polydopamine (PDA) into guanosine-borate (GB) hydrogels and developed a PGB hydrogel with maximal PDA incorporation and good thixotropic and printability qualities. The resulting PGB hydrogels exhibited a well-defined nanofibrillar network, and we found that PDA incorporation increased the hydrogel's osteogenic activity while having no negative effect on mammalian cell survival or migration. In contrast, antimicrobial activity was observed against the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, our findings suggest that our PGB hydrogel represents a significantly improved candidate as a 3D-printed scaffold capable of sustaining living cells, which may be further functionalized by incorporating other bioactive molecules for enhanced tissue integration.

Conductive Thread-Based Immunosensor for Pandemic Influenza A (H1N1) Virus Detection

Infectious agents such as viruses pose significant threats to human health, being transmitted via direct contact as well as airborne transmission without direct contact, thus requiring rapid detection to prevent the spread of infectious diseases. In this study, we developed a conductive thread-based immunosensor (CT-IS), a biosensor to easily detect the presence of airborne viruses. CT-IS utilizes an antibody that specifically recognizes the HA protein of the pandemic influenza A (pH1N1) virus, which is incorporated into the conductive thread. The antigen-antibody interaction results in increased strain on the conductive thread in the presence of the pH1N1 virus, resulting in increased electrical resistance of the CT-IS. We evaluated the performance of this sensor using the HA protein and the pH1N1 virus, in addition to samples from patients infected with the pH1N1 virus. We observed a significant change in resistance in the pH1N1-infected patient samples (positive: n = 11, negative: n = 9), whereas negligible change was observed in the control samples (patients not infected with the pH1N1 virus; negative). Hence, the CT-IS is a lightweight fiber-type sensor that can be used as a wearable biosensor by combining it with textiles, to detect the pH1N1 virus in a person's vicinity.

Magnetically Actuated Microscaffold with Controllable Magnetization and Morphology for Regeneration of Osteochondral Tissue

Magnetic microscaffolds capable of targeted cell delivery have been developed for tissue regeneration. However, the microscaffolds developed so far with similar morphologies have limitations for applications to osteochondral disease, which requires simultaneous treatment of the cartilage and subchondral bone. This study proposes magnetically actuated microscaffolds tailored to the cartilage and subchondral bone for osteochondral tissue regeneration, named magnetically actuated microscaffolds for cartilage regeneration (MAM-CR) and for subchondral bone regeneration (MAM-SBR). The morphologies of the microscaffolds were controlled using a double emulsion and microfluidic flow. In addition, due to their different sizes, MAM-CR and MAM-SBR have different magnetizations because of the different amounts of magnetic nanoparticles attached to their surfaces. In terms of biocompatibility, both microscaffolds were shown to grow cells without toxicity as potential cell carriers. In magnetic actuation tests of the microscaffolds, the relatively larger MAM-SBR moved faster than the MAM-CR under the same magnetic field strength. In a feasibility test, the magnetic targeting of the microscaffolds in 3D knee cartilage phantoms showed that the MAM-SBR and MAM-CR were sequentially moved to the target sites. Thus, the proposed magnetically actuated microscaffolds provide noninvasive treatment for osteochondral tissue disease.

Evaluation of cell adhesion and osteoconductivity in bone substitutes modified by polydopamine

Bones damaged due to disease or accidents can be repaired in different ways. Tissue engineering has helped with scaffolds made of different biomaterials and various methods. Although all kinds of biomaterials can be useful, sometimes their weakness in cellular activity or osteoconductivity prevents their optimal use in the fabrication of bone scaffolds. To solve this problem, we need additional processes, such as surface modification. One of the common methods is coating with polydopamine. Polydopamine can not only cover the weakness of the scaffolds in terms of cellular properties, but it can also create or increase osteoconductivity properties. Polydopamine creates a hydrophilic layer on the surface of scaffolds due to a large number of functional groups such as amino and hydroxyl groups. This layer allows bone cells to anchor and adheres well to the surfaces. In addition, it creates a biocompatible environment for proliferation and differentiation. Besides, the polydopamine coating makes the surfaces chemically active by catechol and amine group, and as a result of their presence, osteoconductivity increases. In this mini-review, we investigated the characteristics, structure, and properties of polydopamine as a modifier of bone substitutes. Finally, we evaluated the cell adhesion and osteoconductivity of different polydopamine-modified bone scaffolds.

New liquid supports in the development of integrated platforms for the reuse of oxidative enzymes and polydopamine production

Polydopamine (PDA), a bioinspired polymer from mussel adhesive proteins, has attracted impressive attention as a novel coating for (nano) materials with an adequate conformal layer and adjustable thickness. Currently, PDA is obtained from dopamine chemical oxidation under alkaline conditions, limiting its use in materials sensible to alkaline environments. Envisaging a widespread use of PDA, the polymerization of dopamine by enzymatic catalysis allows the dopamine polymerization in a large range of pHs, overcoming thus the limitations of conventional chemical oxidation. Moreover, the conventional method of polymerization is a time-consuming process and produces PDA films with poor stability, which restricts its applications. On the other hand, the main bottleneck of enzyme-based biocatalytic processes is the high cost of the single use of the enzyme. In this work, laccase was used to catalyse dopamine polymerization. To improve its performance, a liquid support for integrating the laccase and its reuse together with the PDA production and recovery was developed using aqueous biphasic systems (ABS). Firstly, dopamine polymerization by laccase was optimized in terms of pH, temperature and initial dopamine concentration. It was demonstrated that the highest enzymatic polymerization of dopamine was achieved at pH 5.5, 30°C and 2 mg ml−1 of dopamine. Then, ABS composed of polymers, salts and ionic liquids were evaluated to optimize the laccase confinement in one phase while PDA is recovered in the opposite phase. The most promising ABS allowing the separation of laccase from the reaction product is composed of polypropylene glycol (400 g mol−1) and K2HPO4. The polymerization of dopamine in ABS leads to a remarkable improvement of polymerization of 3.9-fold in comparison to the conventional chemical PDA polymerization. The phase containing the confined laccase was reused for four consecutive reaction cycles, with a relative polymerization of 68.9% in the last cycle. The results of this work proved that ABS are a promising approach to create a liquid support for enzyme reuse allowing the process intensification efforts. The use of biocatalysts in ABS emerges as sustainable and alternative platforms from environmental and techno-economic points of view.

Porous Silicon Carrier Endowed with Photothermal and Therapeutic Effects for Synergistic Wound Disinfection

Drug carriers endowed with photothermal effects will allow the drug delivery system to release drugs in a thermal-stimuli manner. In addition, the photothermal therapy (PTT) will also interplay with therapeutic drugs loaded in the carrier to exhibit synergistic bioactivity for various disease treatment. However, endowing the drug carrier with photothermal and synergistic therapeutic effects still has challenge. Herein, we demonstrate that surface modification of porous silicon (PSi) with polydopamine (PDA) could endow the classical drug carrier with a significant photothermal effect for advanced antibacterial therapy and wound disinfection. Specifically, the PSi surface interacts with a Cu²⁺/PDA complex via a simple and fast surface reduction-induced deposition method, forming the unique CuPDA coated PSi microcarrier (CuPPSi) without blocking the mesoporous structure. The CuPPSi carrier generates a higher near-infrared (NIR) photothermal efficiency and improved drug loading capacity owing to the abundant functional groups of PDA. Stimuli-responsive release of antibacterial Cu²⁺ and loaded curcumin (Cur) from CuPPSi can be realized under multiple stimuli including pH, reactive oxygen species and NIR laser irradition. Benefited from the carrier's intrinsic multimodal therapy, the CuPPSi-Cur platform exhibits amplified, broad-spectrum, and synergistic antibacterial effect, killing more than 98% for both Staphylococcus aureus and Escherichia coli at a mild PTT temperature (∼45 °C). Notably, the combined therapy promotes migration of fibroblasts with no significant cytotoxicity as revealed through cell experiments in vitro. In bacteria-infected mice model, efficient bacterial ablation and wound healing are further demonstrated with negligible side effects in vivo. Overall, the rational design of a drug carrier with photothermal and therapeutic effects provides a novel intervention for amplifing wound disinfection clinically.

Impact of Membrane Modification and Surface Immobilization Techniques on the Hemocompatibility of Hemodialysis Membranes: A Critical Review

Despite significant research efforts, hemodialysis patients have poor survival rates and low quality of life. Ultrafiltration (UF) membranes are the core of hemodialysis treatment, acting as a barrier for metabolic waste removal and supplying vital nutrients. So, developing a durable and suitable membrane that may be employed for therapeutic purposes is crucial. Surface modificationis a useful solution to boostmembrane characteristics like roughness, charge neutrality, wettability, hemocompatibility, and functionality, which are important in dialysis efficiency. The modification techniques can be classified as follows: (i) physical modification techniques (thermal treatment, polishing and grinding, blending, and coating), (ii) chemical modification (chemical methods, ozone treatment, ultraviolet-induced grafting, plasma treatment, high energy radiation, and enzymatic treatment); and (iii) combination methods (physicochemical). Despite the fact that each strategy has its own set of benefits and drawbacks, all of these methods yielded noteworthy outcomes, even if quantifying the enhanced performance is difficult. A hemodialysis membrane with outstanding hydrophilicity and hemocompatibility can be achieved by employing the right surface modification and immobilization technique. Modified membranes pave the way for more advancement in hemodialysis membrane hemocompatibility. Therefore, this critical review focused on the impact of the modification method used on the hemocompatibility of dialysis membranes while covering some possible modifications and basic research beyond clinical applications.

Tools for manipulation and positioning of microtissues

Complex three-dimensional (3D) in vitro models are emerging as a key technology to support research areas in personalised medicine, such as drug development and regenerative medicine. Tools for manipulation and positioning of microtissues play a crucial role in the microtissue life cycle from production to end-point analysis. The ability to precisely locate microtissues can improve the efficiency and reliability of processes and investigations by reducing experimental time and by providing more controlled parameters. To achieve this goal, standardisation of the techniques is of primary importance. Compared to microtissue production, the field of microtissue manipulation and positioning is still in its infancy but is gaining increasing attention in the last few years. Techniques to position microtissues have been classified into four main categories: hydrodynamic techniques, bioprinting, substrate modification, and non-contact active forces. In this paper, we provide a comprehensive review of the different tools for the manipulation and positioning of microtissues that have been reported to date. The working mechanism of each technique is described, and its merits and limitations are discussed. We conclude by evaluating the potential of the different approaches to support progress in personalised medicine.

Mussel-inspired polyurethane coating for bio-surface functionalization to enhance substrate adhesion and cell biocompatibility

Considerable implant materials are prone to cause a severe inflammatory reaction due to poor histocompatibility, which leads to various complications and implant failure. Surface coating modification of these implant materials is one of the most important techniques to settle this problem. However, fabricating a coating with both adequate adhesiveness and excellent biocompatibility remains a challenge. Inspired by the adhesion mechanism of mussels, a series of mussel-inspired polyurethanes (PU-LDAs) were synthysized through a step growth polymerization based on hexamethylene diisocyanate as a hard segment, polytetra-methylene-ether-glycol as a soft segment, lysine-dopamine (LDA) and butanediol as chain extenders with different mole ratios.The coatings of PU-LDAs were applied to various substrates, such as stainless steel, glass and PP using a facile one-step coating process. The introduction of 3,4-dihydroxyphenylalanine (DOPA) groups can greatly improve the adhesion ability of the coatings to the substrates demonstrated by a 180° peel test. The peel strength of the PU-LDA100 coating containing high LDA content was 76.3, 48.5 and 67.5 N/m, which was 106.2%, 246.4% and 192.2% higher than that of the PU-LDA00 coating without LDA on the surface of stainless steel, glass and PP, respectively. Meanwhile, this PU coating has a lower immune inflammatory response which provides a universal method for surface modification of implant materials. Moreover, the DOPA groups in PU-LDAs could combine with the amino and thiol groups on cell membrane surface, leading to the improvement of cell adhesion and growth. Therefore, it has great potential application in the field of biomedical implant materials for the clinic.

Prospects and Challenges of Electrospun Cell and Drug Delivery Vehicles to Correct Urethral Stricture

Current therapeutic modalities to treat urethral strictures are associated with several challenges and shortcomings. Therefore, significant strides have been made to develop strategies with minimal side effects and the highest therapeutic potential. In this framework, electrospun scaffolds incorporated with various cells or bioactive agents have provided promising vistas to repair urethral defects. Due to the biomimetic nature of these constructs, they can efficiently mimic the native cells’ niches and provide essential microenvironmental cues for the safe transplantation of multiple cell types. Furthermore, these scaffolds are versatile platforms for delivering various drug molecules, growth factors, and nucleic acids. This review discusses the recent progress, applications, and challenges of electrospun scaffolds to deliver cells or bioactive agents during the urethral defect repair process. First, the current status of electrospinning in urethral tissue engineering is presented. Then, the principles of electrospinning in drug and cell delivery applications are reviewed. Finally, the recent preclinical studies are summarized and the current challenges are discussed.