Inter-connecting pores of chitosan scaffold with basic fibroblast growth factor modulate biological activity on human mesenchymal stem cells

Suture Fiber Reinforcement of a 3D Printed Gelatin Scaffold for Its Potential Application in Soft Tissue Engineering

Gelatin has excellent biological properties, but its poor physical properties are a major obstacle to its use as a biomaterial ink. These disadvantages not only worsen the printability of gelatin biomaterial ink, but also reduce the dimensional stability of its 3D scaffolds and limit its application in the tissue engineering field. Herein, biodegradable suture fibers were added into a gelatin biomaterial ink to improve the printability, mechanical strength, and dimensional stability of the 3D printed scaffolds. The suture fiber reinforced gelatin 3D scaffolds were fabricated using the thermo-responsive properties of gelatin under optimized 3D printing conditions (-10 °C cryogenic plate, 40-80 kPa pneumatic pressure, and 9 mm/s printing speed), and were crosslinked using EDC/NHS to maintain their 3D structures. Scanning electron microscopy images revealed that the morphologies of the 3D printed scaffolds maintained their 3D structure after crosslinking. The addition of 0.5% (w/v) of suture fibers increased the printing accuracy of the 3D printed scaffolds to 97%. The suture fibers also increased the mechanical strength of the 3D printed scaffolds by up to 6-fold, and the degradation rate could be controlled by the suture fiber content. In in vitro cell studies, DNA assay results showed that human dermal fibroblasts' proliferation rate of a 3D printed scaffold containing 0.5% suture fiber was 10% higher than that of a 3D printed scaffold without suture fibers after 14 days of culture. Interestingly, the supplement of suture fibers into gelatin biomaterial ink was able to minimize the cell-mediated contraction of the cell cultured 3D scaffolds over the cell culture period. These results show that advanced biomaterial inks can be developed by supplementing biodegradable fibers to improve the poor physical properties of natural polymer-based biomaterial inks.

Neuropeptide Substance-P-Conjugated Chitosan Nanofibers as an Active Modulator of Stem Cell Recruiting

The goal to successful wound healing is essentially to immobilize and recruit appropriate numbers of host stem or progenitor cells to the wound area. In this study, we developed a chitosan nanofiber-immobilized neuropeptide substance-P (SP), which mediates stem cell mobilization and migration, onto the surfaces of nanofibers using a peptide-coupling agent, and evaluated its biological effects on stem cells. The amount of immobilized SP on chitosan nanofibers was modulated over the range of 5.89 ± 3.27 to 75.29 ± 24.31 ng when reacted with 10 to 500 ng SP. In vitro migration assays showed that SP-incorporated nanofibers induced more rapid migration of human mesenchymal stem cells on nanofibers compared to pristine samples. Finally, the conjugated SP evoked a minimal foreign body reaction and recruited a larger number of CD29- and CD44-positive stem cells into nanofibers in a mouse subcutaneous pocket model.

An injectable scaffold based on crosslinked hyaluronic acid gel for tissue regeneration

An injectable scaffold of crosslinked hyaluronic acid gel for tissue regeneration.

Membranes combining chitosan and natural-origin nanoliposomes for tissue engineering

Chitosan thin films, elaborated by solvent casting, were functionalized by incorporating nanoliposomes based on natural vegetable (soy based) and marine (salmon derived) lecithin.

Fabrication of porous chitosan-polyvinyl pyrrolidone scaffolds from a quaternary system via phase separation

Three-dimensional porous chitosan-polyvinyl pyrrolidone (PVP) scaffolds were fabricated for tissue engineering applications via liquid-liquid or liquid-solid phase separation. A mixture of an acidic aqueous solution with butanol as a non-solvent and a chitosan-PVP quaternary system were freeze-dried. We then studied the homogenous open pore structure and the minute pore distribution in order to improve the mass transfer and cell seeding efficiency while also obtaining the optimal ratio of PVP to provide high interconnectivity and to improve the open-pore structure. The properties of the porous chitosan-PVP scaffolds - including the microstructure, chemical release, water absorption properties, and cell proliferation tests were studied - and the results were compared against those obtained from conventional scaffolds. chitosan-PVP scaffolds with a porosity of over 70% were obtained, and the pore morphology on the surface and within the porous scaffolds showed the presence of homogenous open pores with excellent interconnectivity. As the PVP content increased, main pores (50-100 μm) and minute pores (4-10 μm) could be clearly observed. Also, the porous scaffold showed an improved efficiency for cell adhesion after the cells were cultured for 4 h. After 72 h, the cultured cells presented an increase in the cell proliferation and on the porous scaffolds. These results strongly suggest that the porous chitosan-PVP scaffolds can be widely used in tissue engineering, including for biopatches and artificial skin applications.