Facile approach to prepare drug-loading film from hemicelluloses and chitosan

Valorization of Grain and Oil By-Products with Special Focus on Hemicellulose Modification

Hemicellulose is one of the most important natural polysaccharides in nature. Hemicellulose from different sources varies in chemical composition and structure, which in turn affects the modification effects and industrial applications. Grain and oil by-products (GOBPs) are important raw materials for hemicellulose. This article reviews the modification methods of hemicellulose in GOBPs. The effects of chemical and physical modification methods on the properties of GOBP hemicellulose biomaterials are evaluated. The potential applications of modified GOBP hemicellulose are discussed, including its use in film production, hydrogel formation, three-dimensional (3D) printing materials, and adsorbents for environmental remediation. The limitations and future recommendations are also proposed to provide theoretical foundations and technical support for the efficient utilization of these by-products.

Ecofriendly polysaccharide-based alginate/pluronic F127 semi-IPN hydrogel with magnetic collectability for precise release of pesticides and sustained pest control

Controlled-release systems are crucial for efficient pesticide utilization and environmental protection in agricultural production. The utilization of polysaccharide-based materials derived from biopolymers as carriers for controlling pesticide release holds significant potential. In this work, a reversible near infrared-responsive polysaccharide-based hydrogel (RNPH) was fabricated by employing a semi-interpenetrating polymer network (alginate-FeIII/pluronic F127) as a carrier to encapsulate Fe3O4@polydopamine (FP) and emamectin benzoate (EB)-loaded hollow mesoporous silica. The incorporation of FP into the RNPH introduced a photothermal effect, enabling the precise release of EB through reversible shrinkage of the hydrogel upon NIR irradiation. Additionally, the presence of magnetic Fe3O4 in the system facilitated the rapid removal of remaining RNPH from the environment using a magnet, reducing EB residue. Importantly, RNPH exhibited exceptional controlled-release performance and could be reused for at least 4 cycles. Furthermore, the anti-photolysis ability of EB protected by RNPH was enhanced by 4.8 times compared to EB alone. Moreover, RNPH significantly improved the adhesion of EB to foliar surfaces, thereby reducing the loss of EB while ensuring crop safety. Therefore, the polysaccharide-based hydrogel holds promise as a versatile carrier for the precise release of EB, offering valuable applications in enhancing pesticide bioavailability and promoting environmental safety.

Lignocellulosic Bionanomaterials for Biosensor Applications

The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.

Sustainable Approach of Functional Biomaterials-Tissue Engineering for Skin Burn Treatment: A Comprehensive Review

Burns are a widespread global public health traumatic injury affecting many people worldwide. Non-fatal burn injuries are a leading cause of morbidity, resulting in prolonged hospitalization, disfigurement, and disability, often with resulting stigma and rejection. The treatment of burns is aimed at controlling pain, removing dead tissue, preventing infection, reducing scarring risk, and tissue regeneration. Traditional burn wound treatment methods include the use of synthetic materials such as petroleum-based ointments and plastic films. However, these materials can be associated with negative environmental impacts and may not be biocompatible with the human body. Tissue engineering has emerged as a promising approach to treating burns, and sustainable biomaterials have been developed as an alternative treatment option. Green biomaterials such as collagen, cellulose, chitosan, and others are biocompatible, biodegradable, environment-friendly, and cost-effective, which reduces the environmental impact of their production and disposal. They are effective in promoting wound healing and reducing the risk of infection and have other benefits such as reducing inflammation and promoting angiogenesis. This comprehensive review focuses on the use of multifunctional green biomaterials that have the potential to revolutionize the way we treat skin burns, promoting faster and more efficient healing while minimizing scarring and tissue damage.

Antifatigue Hydration-Induced Polysaccharide Hydrogel Actuators Inspired by Crab Joint Wrinkles

Joint wrinkles in animals facilitate frequent bending and contribute to the duration of the joint. Inspired by the morphology and function of joint wrinkles, we developed a bionic hydration-induced polymeric actuator with constructed wrinkles at the selected area. Specifically, we adopt electrical writing to create defined single and double cross-linking regions on chitosan (CS) hydrogel. The covalent cross-linking network was constructed by electrical writing-induced covalent cross-linking between CS chains and epichlorohydrin. Subsequent treatment of sodium dodecyl sulfate allows electrostatic cross-linking at the unwritten area with the simultaneous formation of surface wrinkles. The resulting single and double cross-linking hydrogel demonstrates spontaneous deformation behaviors by the influx and efflux of H₂O to the electrostatic cross-linking domain under different ion concentrations. Importantly, the wrinkle structure endows the hydrogel with extraordinary antifatigue bending performance. By regulating the surface morphology and spatial cross-linking, we can design novel biomimetic polysaccharide hydrogel actuators with fascinating functions.

The use of chitosan as a skin-regeneration agent in burns injuries: A review

Chitosan is an amino-polysaccharide, traditionally obtained by the partial deacetylation of chitin from exoskeletons of crustaceans. Properties such as biocompatibility, hemostasis, and the ability to absorb physiological fluids are attributed to this biopolymer. Chitosan’s biological properties are regulated by its origin, polymerization degree, and molecular weight. In addition, it possesses antibacterial and antifungal activities. It also has been used to prepare films, hydrogels, coatings, nanofibers, and absorbent sponges, all utilized for the healing of skin wounds. In in vivo studies with second-degree burns, healing has been achieved in at least 80% of the cases between the ninth and twelfth day of treatment with chitosan coatings. The crucial steps in the treatment of severe burns are the early excision of damaged tissue and adequate coverage to minimize the risk of infection. So far, partial-thickness autografting is considered the gold standard for the treatment of full-thickness burns. However, the limitations of donor sites have led to the development of skin substitutes. Therefore, the need for an appropriate dermal equivalent that functions as a regeneration template for the growth and deposition of new skin tissue has been recognized. This review describes the properties of chitosan that validate its potential in the treatment of skin burns.

High-Performanced Hemicellulose Based Organic-Inorganic Films with Polyethyleneimine

For the high-value utilization of hemicellulose-based composite films, the poor film-forming and mechanical properties of hemicellulose-based composite films must be surmounted crucially. Based on this, hemicellulose-based organic-inorganic composite films with good mechanical properties were prepared from quaternized hemicelluloses (QH), bentonite, and polyethyleneimine (PEI). The QH/PEI/bentonite composite films were prepared by vacuum filtration, and the properties of the composite film were investigated. The results showed that the QH was inserted into bentonite nanosheets through hydrogen bonding and electrostatic interactions. PEI was cross-linked with hemicellulose by hydroxyl groups, electrostatically attracted by the bentonite flake layers. The mechanical properties of the composite films were significantly increased by the incorporation of PEI. When the PEI content was 20%, the tensile stress of the composite film was increased by 155.18%, and the maximum tensile stress was reached 80.52 MPa. The composite films had strong UV absorption ability with the transmittance was almost 0 in the UV region from 200 to 300 nm. The thermal property of composite film was also improved, and the residual mass increased by three times compared to QH. These results provide a theoretical basis for the use of hemicellulose-based composite films in packaging applications.

Electrical Writing Induced Covalent Cross-Linking on Hydrogel for Multidimensional Structural Information Storage

The storage of dynamic information in hydrogel is extremely interesting due to the reprogrammable and responsive features of hydrogel. Here, we report that structural information can be stored in polysaccharide hydrogel by electrically induced covalent cross-linking, and the imbedded information can be retrieved by different means (dye adsorption, protonation of chitosan, and acid dissolution). Taking the advantage of diffusible feature of hydrogel, OH^- was generated from the contacting area of the electrode and controllably diffused by electrical writing, thus the high pH domain (pH ∼ 10) triggered covalent cross-linking of the hydrogel. The written area exhibits different micromorphology, chemical properties, and pH sensitivity, allowing dynamic 2D and 3D information to be stored and read when necessary. This work demonstrates the use of stable electrical inputs to store dynamic structural information in a biopolymer-based hydrogel and how the chemical and physical varies allow eye recognition to the embedded information.

Fabrication of flexible composite film based on xylan from pulping process for packaging application

To realize the application of xylan based film in food and drug packaging, the poor mechanical property and film-forming property of xylan based film must be overcome. Herein, a good oxygen barrier composite film with desired mechanical properties was prepared based on carboxymethly xylan (CMX), chitosan (CS), and graphene oxide (GO). The results of scanning electron microscope revealed the composite film had a dense and continuous structure, which will endow the composite film with excellent mechanical property. As expected, the composite film with the 0.5% mass fraction of GO exhibited best mechanical property, among which the tensile stress, tensile strain, and Young's modulus of the composite film reached 50.81 MPa, 47.61%, and 1.39 GPa, respectively. The oxygen barrier properties of the composite films significantly increased with the addition of graphene oxide due to the dense, stacked multilayer structure. In addition, these composite films exhibited good antibacterial properties. Therefore, these films show great promise in the field of food packaging and wound dressing due to their excellent mechanical, oxygen barrier and antibacterial properties.

Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review

Biopolymers are materials synthesised or derived from natural sources, such as plants, animals, microorganisms or any other living organism. The use of these polymers has grown significantly in recent years as industry shifts away from unsustainable fossil fuel resources and looks towards a softer and more sustainable environmental approach. This review article covers the main classes of biopolymers: Polysaccharides, proteins, microbial-derived and lignin. In addition, an overview of the leading biomedical applications of biopolymers is also provided, which includes tissue engineering, medical implants, wound dressings, and the delivery of bioactive molecules. The future clinical applications of biopolymers are vast, due to their inherent biocompatibility, biodegradability and low immunogenicity. All properties which their synthetic counterparts do not share.

Poplar Hot Water Extract Enhances Barrier and Antioxidant Properties of Chitosan/Bentonite Composite Film for Packaging Applications

Herein, the chitosan-based (CS) composite film was fabricated via a simple and efficient blending approach by adding poplar hot water extract (HWE), bentonite (BT) and chitosan. The addition of HWE largely improved the UV blocking ability and antioxidant properties of the resultant composite film, and simultaneously a tortuous path was constructed within the chitosan matrix to enhance the water vapor and oxygen barriers after the addition of BT. Specially, the content of HWE at 10 wt % gave a greatly decreased UV light transmittance at 280 nm to the CS-BT-HWE composite film that was 99.36% lower than that of CS-BT film, and the oxidation resistance was 9.65 times higher than that of CS-BT. The mechanical properties and surface morphological observation evaluated by scanning electron microscopy (SEM) and scanning probe microscope (SPM) confirmed the film had a denser structure. The internal chemical structure analyzed using solid state NMR, FTIR and X-ray spectra exhibited the resultant Maillard structure and strong hydrogen bonding that contributed to the improved mechanical properties. Overall, the as-prepared composite film has great potential as food packaging materials, and also provides a high-efficient utilization pathway for HWE.

Hemicellulose from Plant Biomass in Medical and Pharmaceutical Application: A Critical Review

BACKGROUND

Due to the non-toxicity, abundance and biodegradability, recently more and more attention has been focused on the exploration of hemicellulose as the potential substrate for the production of liquid fuels and other value-added chemicals and materials in different fields. This review aims to summarize the current knowledge on the promising application of nature hemicellulose and its derivative products including its degradation products, its new derivatives and hemicellulosebased medical biodegradable materials in the medical and pharmaceutical field, especially for inmmune regulation, bacteria inhibition, drug release, anti-caries, scaffold materials and anti-tumor.

METHODS

We searched the related papers about the medical and pharmaceutical application of hemicellulose and its derivative products, and summarized their preparation methods, properties and use effects.

RESULTS

Two hundred and twenty-seven papers were included in this review. Forty-seven papers introduced the extraction and application in immune regulation of nature hemicellulose, such as xylan, mannan, xyloglucan (XG) and β-glucan. Seventy-seven papers mentioned the preparation and application of degradation products of hemicellulose for adjusting intestinal function, maintaining blood glucose levels, enhancing the immunity and alleviating human fatigue fields such as xylooligosaccharides, xylitol, xylose, arabinose, etc. The preparation of hemicellulose derivatives were described in thirty-two papers such as hemicellulose esters, hemicellulose ethers and their effects on anticoagulants, adsorption of creatinine, the addition of immune cells and the inhibition of harmful bacteria. Finally, the preparations of hemicellulose-based materials such as hydrogels and membrane for the field of drug release, cell immobilization, cancer therapy and wound dressings were presented using fifty-five papers.

CONCLUSION

The structure of hemicellulose-based products has the significant impact on properties and the use effect for the immunity, and treating various diseases of human. However, some efforts should be made to explore and improve the properties of hemicellulose-based products and design the new materials to broaden hemicellulose applications.

Facile and green preparation of hemicellulose-based film with elevated hydrophobicity via cross-linking with citric acid

Hemicellulose has shown great potential in food packaging due to its excellent biodegradability and low oxygen permeability. However, its strong hydrophilicity leads to poor moisture resistance and hinders its wide application. To address this issue, herein a ternary carboxylic acid, citric acid (CA), was incorporated into hemicellulose as esterifying agent to form a crosslinking structure via the esterification reaction. The CA-modified hemicellulose films showed an increased contact angle of 87.5° (vs. 40.5° for unmodified film), demonstrating that the hydrophobicity of hemicellulose had been improved significantly. In addition, the esterification/cross-linking modification enhanced oxygen barrier performance with oxygen permeability decreasing from 1053 (cm3 μm) (m2 d kPa)-1 to 1.8 (cm3 μm) (m2 d kPa)-1. Moreover, the tensile strength rose to a peak value and then fell back at higher CA content. Effect of CA addition on elongation at break exhibited an opposite trend. The modified hemicellulose films with 20% CA addition possessed the highest tensile strength and the lowest elongation at break. Morphology observation with scanning electron microscopy indicated that at CA content exceeding 20%, the modified films were dense with a smooth surface, illustrating the improvement of phase compatibility. A possible mechanism for esterification/cross-linking was proposed to elucidate the connection between CA addition and film performances.

Novel skin patch combining human fibroblast-derived matrix and ciprofloxacin for infected wound healing

Skin injuries are frequently encountered in daily life, but deep wounds often poorly self-heal and do not recover completely. In this study, we propose a novel skin patch that combines antibiotic, cell-derived extracellular matrix (ECM) and biocompatible polyvinyl alcohol (PVA) hydrogel.

Methods: Decellularized human lung fibroblast-derived matrix (hFDM) was prepared on tissue culture plate (TCP) and PVA solution was then poured onto it. After a freeze-thaw process, PVA was peeled off from TCP along with hFDM tightly anchored to PVA. Subsequently, ciprofloxacin (Cipro)-incorporated PVA/hFDM (PVA/Cipro/hFDM) was fabricated via diffusion-based drug loading.

Results: In vitro analyses of PVA/Cipro/hFDM show little cytotoxicity of ciprofloxacin, stability of hFDM, rich fibronectin in hFDM, and good cell attachment, respectively. In addition, hFDM proved to be beneficial in promoting cell migration of dermal fibroblasts and human umbilical vein endothelial cells (HUVECs) using transwell inserts. The antibacterial drug Cipro was very effective in suppressing colony growth of gram-negative and -positive bacteria as identified via an inhibition zone assay. For animal study, infected wound models in BALB/c mice were prepared and four test groups (control, PVA, PVA/Cipro, PVA/Cipro/hFDM) were administered separately and their effect on wound healing was examined for up to 21 days. The results support that Cipro successfully reduced bacterial infection and thus encouraged faster wound closure. Further analysis using histology and immunofluorescence revealed that the most advanced skin regeneration was achieved with PVA/Cipro/hFDM, as assessed via re-epithelialization, collagen texture and distribution in the epidermis, and skin adnexa (i.e., glands and hair follicles) regeneration in the dermis.

Conclusion: This work demonstrates that our skin patch successfully consolidates the regenerative potential of ECM and the antibacterial activity of Cipro for advanced wound healing.

Turning Wood Autohydrolysate Directly into Food Packing Composite Films with Good Toughness

Bio-based composite films were produced by incorporating wood autohydrolysate (WH), chitosan (CS), and cellulose nanocrystals (CNC). In this work, WH was directly utilized without further purification, and CNC was introduced as the reinforced material to prepare WH-CS-CNC composite films with excellent properties. The effects of CNC on the properties of WH-CS-CNC composite films were investigated by characterizing their structures, mechanical properties, oxygen barrier, and thermal stability properties. The results suggested that CNC could improve tensile strength of the composite films, and the tensile strain at break could be up to 4.7%. Besides, the oxygen permeability of the prepared composite films could be as low as 3.57 cm3/day·m2·kPa, making them suitable for the food packaging materials. These above results showed that the addition of CNC is an effective method to enhance the toughness of composite films. In addition, WH-CS-CNC composite films have great potential in the field of sustainable food packing materials.