Microencapsulation of sardine oil: Application of vanillic acid grafted chitosan as a bio-functional wall material

Unveiling the effect of molecular weight of vanillic acid grafted chitosan hydrogel films on physical, antioxidant, and antimicrobial properties for application in food packaging

Till now, a wide range of chitosan (CHS)-based food packaging films have been developed. Yet, the role of molecular weight (MW), which is an important physical property of CHS, in determining the physicochemical and biochemical properties of vanillic acid (VA)-grafted CHS hydrogel films synthesized using CHS with different MWs has not been investigated until now. Three kinds of CHS including low, medium, and high MWs were grafted separately with VA through a carbodiimide mediated coupling reaction. No significant difference in water resistance properties was observed with increasing MW of CHS, in contrast to obvious decrease in light transmittance and opacity. The VA-g-CHS hydrogel films exhibited significantly improved light blocking capacity. A significant improvement in antioxidant (~6-fold) and antimicrobial (~1.2-fold) activity was observed after grafting with VA. In contrast, the free radical scavenging and antimicrobial activity decreased with increasing MW of CHS. Most importantly, VA-g-CHS hydrogel films could maintain the freshness of cherry tomatoes for up to 10 days at ~25 °C. However, no significant difference was observed depending on the MW value of CHS. This pioneering work is of great importance in guiding the selection of MW of CHS biomacromolecule to design hydrogel films with desired physicochemical and biochemical properties.

Co-Microencapsulation of Sacha Inchi (Plukenetia huayllabambana) Oil with Natural Antioxidants Extracts

Sacha inchi (Plukenetia huayllabambana) oil was co-microencapsulated with natural antioxidant extracts (NAE), such as camu-camu (Myrciaria dubia (HBK) Mc Vaugh) fruit, Añil variety Andean potato (Solanum tuberosum andigenum, and elderberry fruit (Sambucus peruviana). Gum Arabic and the ternary combination of gum Arabic (GA) + maltodextrin (MD) + whey protein isolate (WPI) at different formulations were used as coating materials for the encapsulation process using spray-drying. The moisture content, particle size distribution and morphology, total phenolic content, antioxidant activity, fatty acid and sterol composition, oxidative stability, and shelf-life were evaluated. Co-microcapsules of sacha inchi (P. huayllabambana) oil with camu camu skin extract (CCSE) at 200 ppm encapsulated with GA + MD + WPI had the highest total polyphenol content (4239.80 µg GAE/g powder), antioxidant activity (12,454.00 µg trolox/g powder), omega-3 content (56.03%), β-sitosterol (62.5%), greater oxidative stability (Oxidation Onset temperature of 189 °C), higher shelf-life (3116 h), and smaller particle sizes (6.42 μm). This research enhances the knowledge to obtain microcapsules containing sacha inchi (P. huayllabambana) oil with natural antioxidant extracts that could be used for the development of functional foods. Further research is needed to study the potential interactions and their influence between the bioactive components of the microcapsules and the challenges that may occur during scale-up to industrial production.

Preparation and Characterization of Phenolic Acid-Chitosan Derivatives as an Edible Coating for Enhanced Preservation of Saimaiti Apricots

In this study, caffeic acid (CA) and chlorogenic acid (CGA) were incorporated onto chitosan (CS) using free radical grafting initiated by a hydrogen peroxide/ascorbic acid (H₂O₂/Vc) redox system. The structural properties of the CA (CA-g-CS) and CGA (CGA-g-CS) derivatives were characterized by UV-Vis absorption, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and thermal stability analysis. Then, the antioxidant and antibacterial properties were evaluated, and the effect of CGA-g-CS on the postharvest quality of Saimaiti apricot was studied. It proved that phenolic acids were successfully grafted onto the CS. The grafting ratios of CA-g-CS and CGA-g-CS were 126.21 mg CAE/g and 148.94 mg CGAE/g. The antioxidation and antibacterial activities of CGA-g-CS were better than those of CA-g-CS. The MICs of CGA-g-CS against E. coli, S. aureus, and B. subtilis were 2, 1, and 2 mg/mL. The inhibitory zones of 20 mg/mL CGA-g-CS against the three bacteria were 19.16 ± 0.35, 16.33 ± 0.91, and 16.24 ± 0.05 mm. The inhibitory effects of 0.5% CGA-g-CS on the firmness, weight loss, SSC, TA, relative conductivity, and respiration rate of the apricot were superior. Our results suggest that CGA-g-CS can be potentially used as an edible coating material to preserve apricots.

Recent Developments in the Microencapsulation of Fish Oil and Natural Extracts: Procedure, Quality Evaluation and Food Enrichment

Due to the beneficial health effects of omega-3 fatty acids and antioxidants and their limited stability in response to environmental and processing factors, there is an increasing interest in microencapsulating them to improve their stability. However, despite recent developments in the field, no specific review focusing on these topics has been published in the last few years. This work aimed to review the most recent developments in the microencapsulation of fish oil and natural antioxidant compounds. The impact of the wall material and the procedures on the quality of the microencapsulates were preferably evaluated, while their addition to foods has only been studied in a few works. The homogenization technique, the wall-material ratio and the microencapsulation technique were also extensively studied. Microcapsules were mainly analyzed for size, microencapsulation efficiency, morphology and moisture, while in vitro digestion, flowing properties, yield percentage and Fourier transform infrared spectroscopy (FTIR) were used more sparingly. Findings highlighted the importance of optimizing the most influential variables of the microencapsulation procedure. Further studies should focus on extending the range of analytical techniques upon which the optimization of microcapsules is based and on addressing the consequences of the addition of microcapsules to food products.

Sardine oil loaded vanillic acid grafted chitosan microparticles improves the in vivo antioxidant, haematological and lipid profile

Oxidative stability of fish oil supplements poses a considerable health risk which can be prevented by novel delivery systems. A newly developed formulation of microencapsulated sardine oil showed excellent oxidative stability in vitro. The present study's objective is to evaluate the new formulation in vivo as a potential new supplement which may improve antioxidant, haematological, and lipid profile. The optimisation of the sardine oil loaded microparticles (SO-M) and the characterisation have been presented briefly. The SO-M formulation was fed to male albino rats for two months. Following the feeding experiment, haemoglobin content, platelet and RBC count were assessed in the control and treated group. Similarly, levels of serum cholesterol, HDL, LDL, triglycerides, and metabolic enzyme biomarkers, namely catalase, SOD, GST, AST, ALT, ACP and ALP, were compared. The blood analysis showed a significant increase in haemoglobin, platelets and RBC count in the treated group. Lipid profiling showed that both triglycerides and LDL levels were decreased in the sample treated group. This study also showed significant modulation of antioxidant enzymes such as catalase, SOD and GST. The new formulation of PUFA rich sardine oil significantly improved the in vivo antioxidant, haematological and lipid profile, suggesting potential use as a dietary supplement.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13197-021-05329-5.

Whole Wheat Crackers Fortified with Mixed Shrimp Oil and Tea Seed Oil Microcapsules Prepared from Mung Bean Protein Isolate and Sodium Alginate

Shrimp oil (SO) rich in n-3 fatty acids and astaxanthin, mixed with antioxidant-rich tea seed oil (TSO), was microencapsulated using mung bean protein isolate and sodium alginate and fortified into whole wheat crackers. SO and TSO mixed in equal proportions were emulsified in a solution containing mung bean protein isolate (MBPI) and sodium alginate (SA) at varied ratios. The emulsions were spray-dried to entrap SO-TSO in MBPI-SA microcapsules. MBPI-SA microcapsules loaded with SO-TSO showed low to moderately high encapsulation efficiencies (EE) of 32.26–72.09% and had a fair flowability index. Two selected microcapsules with high EE possessed the particle sizes of 1.592 and 1.796 µm with moderate PDI of 0.372 and 0.403, respectively. Zeta potential values were −54.81 mV and −53.41 mV. Scanning electron microscopic (SEM) images indicated that microcapsules were spherical in shape with some shrinkage on the surface and aggregation took place to some extent. Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) analyses of samples empirically validated the presence of SO-TSO in the microcapsules. Encapsulated SO-TSO showed superior oxidative stability and retention of polyunsaturated fatty acids (PUFAs) to unencapsulated counterparts during storage of 6 weeks. When SO-TSO microcapsules were fortified in whole wheat crackers at varying levels (0–10%), the crackers showed sensorial acceptability with no perceivable fishy odor. Thus, microencapsulation of SO-TSO using MBPI-SA as wall materials could be used as an alternative carrier system, in which microcapsules loaded with PUFAs could be fortified in a wide range of foods.

Natural Biocidal Compounds of Plant Origin as Biodegradable Materials Modifiers

The article presents a literature review of the plant origin natural compounds with biocidal properties. These compounds could be used as modifiers of biodegradable materials. Modification of polymer material is one of the basic steps in its manufacturing process. Biodegradable materials play a key role in the current development of materials engineering. Natural modifiers are non-toxic, environmentally friendly, and renewable. The substances contained in natural modifiers exhibit biocidal properties against bacteria and/or fungi. The article discusses polyphenols, selected phenols, naphthoquinones, triterpenoids, and phytoncides that are natural antibiotics. Due to the increasing demand for biodegradable materials and the protection of the natural environment against the negative effects of toxic substances, it is crucial to replace synthetic modifiers with plant ones. This work mentions industries where materials containing natural modifying additives could find potential applications. Moreover, the probable examples of the final products are presented. Additionally, the article points out the current world's pandemic state and the use of materials with biocidal properties considering the epidemiological conditions.

Chitosan and its composites-based delivery systems: advances and applications in food science and nutrition sector

Natural bioactive ingredients have lower bioavailability because of their chemical instability and poor water solubility, which limits their applications in functional foods. Among diverse biopolymers that can be used to construct delivery systems of bioactives, chitosan has attracted extensive attention due to its unique cationic nature, excellent mucoadhesive properties and easy modification. In this review, chitosan and its composites-based food-grade delivery systems as well as the factors affecting their performance are summarized. Modification, crosslinking, combination with other biopolymer or utilization of coating material can effectively overcome the instability of pure chitosan-based carriers under acidic conditions, thereby constructing chitosan and its complex-based carriers with conspicuously improved performance. Furthermore, the applications of chitosan-based delivery systems in nutrition and health as well as their future development trends and challenges are discussed. Functional food ingredients, functional food packaging and biological health are potential applications of chitosan-based food-grade delivery systems. The research trends of nutraceutical delivery systems based on chitosan and its composites include co-delivery of nutrients and essential oils, targeted intestinal delivery, stimulus responsive/sustained release and their applications in real foods. In conclusion, food industry will be significantly promoted with the continuous innovation and development of chitosan-based nutraceutical delivery systems.

Development of chitosan based microencapsulated spray dried powder of tuna fish oil: oil load impact and oxidative stability

The impact of fish oil concentration on the oxidative stability of microcapsules through the spray drying process using chitosan and maltodextrin as wall material was studied. Emulsions were prepared with different Tuna fish oil (TFO) content (TFO-10%, TFO20%, TF030% TF0-40%) while wall material concentration was kept constant. Microencapsulated powder resulting from emulsion prepared with high fish oil load have high moisture content, wettability, total oil and low encapsulation efficiency, hygroscopicity and bulk tapped density. Oxidative stability was evaluated periodically by placing microcapsules at room temperature. Microcapsules prepared with TFO-10% presented high oxidative stability in terms of peroxide value (2.94±0.04) and anisidine value (1.54±0.02) after 30 days of storage. It was concluded that optimal amounts of fish oil for microencapsulation are 10% and 20% using chitosan and maltodextrin that extended its shelf life during study period.

Preparation and properties of caffeic-chitosan grafting fish bone collagen peptide

In this study, a novel peptide grafted chitosan (CACS-FBP) with high peptide content, excellent moisture-absorption and moisture-retention abilities was prepared. Caffeic acid (CA) was used to modify chitosan, the highly water-soluble intermediate further reacted with fish bone collagen peptide to obtain the final product, and the synthesis of CACS-FBP was confirmed by the Fourier transform infrared spectroscopy (FT-IR), NMR, and UV-vis. The single-factor experiments indicated that the degree of substitution (DS) of CACS-FBP depended on the reaction temperature, reaction time, the mass ratio of fish bone collagen peptide to CACS (mFBP/mCACS) and the mass ratio of MTGase to CACS (mMTGase/mCACS). In addition, the antioxidant assay indicated that CACS-FBP had an excellent antioxidant capacity, and the CACS-FBP showed no cytotoxicity toward L929 mouse fibroblasts, all the results mean that the prepared peptide-containing chitosan derivative has potential application in pharmaceutical and biomedical fields.

Encapsulation and Protection of Omega-3-Rich Fish Oils Using Food-Grade Delivery Systems

Regular consumption of adequate quantities of lipids rich in omega-3 fatty acids is claimed to provide a broad spectrum of health benefits, such as inhibiting inflammation, cardiovascular diseases, diabetes, arthritis, and ulcerative colitis. Lipids isolated from many marine sources are a rich source of long-chain polyunsaturated fatty acids (PUFAs) in the omega-3 form which are claimed to have particularly high biological activities. Functional food products designed to enhance human health and wellbeing are increasingly being fortified with these omega-3 PUFAs because of their potential nutritional and health benefits. However, food fortification with PUFAs is challenging because of their low water-solubility, their tendency to rapidly oxidize, and their variable bioavailability. These challenges can be addressed using advanced encapsulation technologies, which typically involve incorporating the omega-3 oils into well-designed colloidal particles fabricated from food-grade ingredients, such as liposomes, emulsion droplets, nanostructured lipid carriers, or microgels. These omega-3-enriched colloidal dispersions can be used in a fluid form or they can be converted into a powdered form using spray-drying, which facilitates their handling and storage, as well as prolonging their shelf life. In this review, we provide an overview of marine-based omega-3 fatty acid sources, discuss their health benefits, highlight the challenges involved with their utilization in functional foods, and present the different encapsulation technologies that can be used to improve their performance.

Hydroxycinnamic Acids and Derivatives Formulations for Skin Damages and Disorders: A Review

Alterations of skin homeostasis are widely diffused in our everyday life both due to accidental injuries, such as wounds and burns, and physiological conditions, such as late-stage diabetes, dermatitis, or psoriasis. These events are locally characterized by an intense inflammatory response, a high generation of harmful free radicals, or an impairment in the immune response regulation, which can profoundly change the skin tissue' repair process, vulnerability, and functionality. Moreover, diabetes diffusion, antibiotic resistance, and abuse of aggressive soaps and disinfectants following the COVID-19 emergency could be causes for the future spreading of skin disorders. In the last years, hydroxycinnamic acids and derivatives have been investigated and applied in several research fields for their anti-oxidant, anti-inflammatory, and anti-bacterial activities. First, in this study, we give an overview of these natural molecules' current source and applications. Afterwards, we review their potential role as valid alternatives to the current therapies, supporting the management and rebalancing of skin disorders and diseases at different levels. Also, we will introduce the recent advances in the design of biomaterials loaded with these phenolic compounds, specifically suitable for skin disorders treatments. Lastly, we will suggest future perspectives for introducing hydroxycinnamic acids and derivatives in treating skin disorders.

Advancements in liposome technology: Preparation techniques and applications in food, functional foods, and bioactive delivery: A review

Liposomes play a significant role in encapsulation of various bioactive compounds (BACs), including functional food ingredients to improve the stability of core. This technology can be used for promoting an effective application in functional food and nutraceuticals. Incorporation of traditional and emerging methods for the developments of liposome for loading BACs resulted in viable and stable liposome formulations for industrial applications. Thus, the advance technologies such as supercritical fluidic methods, microfluidization, ultrasonication with traditional methods are revisited. Liposomes loaded with plant and animal BACs have been introduced for functional food and nutraceutical applications. In general, application of liposome systems improves stability, delivery, and bioavailability of BACs in functional food systems and nutraceuticals. This review covers the current techniques and methodologies developed and practiced in liposomal preparation and application in functional foods.

Effects of particle formation behavior on the properties of fish oil microcapsules fabricated using a micro-fluidic jet spray dryer

Fish oil was encapsulated with whey protein isolate (WPI) as wall material using a Micro-Fluidic Jet Spray Dryer. The effects of core/wall material ratio, drying temperature and total solids content on the properties of microcapsules were studied. Low core/wall material ratios at 1:5 and 1:3 resulted in high encapsulation efficiency (EE) and excellent oxidative stability of microparticles during storage. Reducing the inlet temperature from 160 to 110 °C remarkably decreased EE from around 99 to 64.8%, associated with substantial increases in peroxide value during storage. The total solids content mainly altered the morphology of microcapsules, showing little influence on EE and oxidative stability. We proposed that the different drying conditions impacted on particle formation behavior during spray drying, which could be a crucial factor responsible for the differences in the quality attributes of microparticles. A low core/wall material ratio and high drying temperature facilitated the formation of a rigid protein skin at droplet surface during drying, whereas a high solids fraction in the droplets could limit possible droplet shrinkage. These factors contributed positively to the encapsulation of the lipophilic core material.

Encapsulation of Active Ingredients in Food Industry by Spray-Drying and Nano Spray-Drying Technologies

Since its invention in 1872 by Samuel Percy, the spray drying of food products has been widely used, whether in products consumed by babies in milk formulations, powdered sweets and cocoa soluble in milk for children, or food supplements rich in proteins, vitamins, and minerals for adults. All of these products were first formulated in solution and then converted into powders to facilitate the transport and preservation of the properties during storage. In recent years, novel technologies such as nano spray drying have emerged for the development of food formulations with high-cost active ingredients. The aim of the present work is to present a review of the literature reported in the last 10 years related to these technologies. The basis of the spray-drying technologies i.e., conventional and nano, are described and compared, emphasizing the instrumental processing conditions for achieving a desired product. Examples of some unwanted reactions presented during the encapsulation of active ingredients are provided.

Phenolic Acids of Plant Origin-A Review on Their Antioxidant Activity In Vitro (O/W Emulsion Systems) Along with Their in Vivo Health Biochemical Properties

Nature has generously offered a wide range of herbs (e.g., thyme, oregano, rosemary, sage, mint, basil) rich in many polyphenols and other phenolic compounds with strong antioxidant and biochemical properties. This paper focuses on several natural occurring phenolic acids (caffeic, carnosic, ferulic, gallic, p-coumaric, rosmarinic, vanillic) and first gives an overview of their most common natural plant sources. A summary of the recently reported antioxidant activities of the phenolic acids in o/w emulsions is also provided as an in vitro lipid-based model system. Exploring the interfacial activity of phenolic acids could help to further elucidate their potential health properties against oxidative stress conditions of biological membranes (such as lipoproteins). Finally, this review reports on the latest literature evidence concerning specific biochemical properties of the examined phenolic acids.

Plasticized Cellulosic Films by Partial Esterification and Welding in Low-Concentration Ionic Liquid Electrolyte

Alternatives to petroleum-based plastics are of great significance not only from the point of view of their scientific and practical impact but to reduce the environmental footprint. Inspired by the composition and structure of wood’s cell walls, we used phenolic acids to endow cellulosic fibers with new properties. The fiber dissolution and homogeneous modification were performed with a recyclable ionic liquid (IL) (tetrabutylammonium acetate ([N₄₄₄₄][OAc]):dimethyl sulfoxide) to attain different levels of reaction activity for three phenolic acids (p-hydroxybenzoic acid, vanillic acid, and syringic acid). The successful autocatalytic Fischer esterification reaction was thoroughly investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, elemental analysis, and nuclear magnetic resonance spectroscopy (¹³C CP-MAS, diffusion-edited ¹H NMR and multiplicity-edited heteronuclear single quantum coherence). Control of the properties of cellulose in the dispersed state, welding, and IL plasticization were achieved during casting and recrystallization to the cellulose II crystalline allomorph. Films of cellulose carrying grafted acids were characterized with respect to properties relevant to packaging materials. Most notably, despite the low degree of esterification (DS < 0.25), the films displayed a remarkable strength (3.5 GPa), flexibility (strains up to 35%), optical transparency (>90%), and water resistance (WCA ∼ 90°). Moreover, the measured water vapor barrier was found to be similar to that of poly(lactic acid) composite films. Overall, the results contribute to the development of the next-generation green, renewable, and biodegradable films for packaging applications.

The Effect of Pharmaceutical Excipients for Applying to Spray-Dried Omega-3 Powder

Omega-3 fatty acid plays a role in protecting cells in the human body, maintaining the structure of the cell, and helping smooth metabolism. Also, it inhibits the formation of blood clotting and is effective in enhancing the formation of bone. However, the instability due to fatty acid oxidation and a fishy smell are the reasons it is avoided by people. In this study, we tried to obtain the omega-3 powder through spray-drying method using a variety of binders and surfactants for improving the limit of omega-3 fatty acid. First of all, an olive oil was used instead of omega-3 for optimization of the preparation of spray-dried omega-3 powder. Through the screening of binders and surfactants, γ-cyclodextrin and hydrogenated lecithin were chosen as a binder and a surfactant, respectively. Omega-3-loaded spray-dried powder was obtained, eventually. The morphology of omega-3-loaded spray-dried powder was spherical of 310 nm and the DHA amount was 98%. This study suggested that the transformation of omega-3 fatty acid into solid state by spray-drying using a binder and a surfactant was successively performed.

Advances in Spray-Drying Encapsulation of Food Bioactive Ingredients: From Microcapsules to Nanocapsules

Many natural food bioactive ingredients are sensitive to processing and environmental conditions and thus it is necessary to improve their stability to create products with long shelf lives. Encapsulation by spray drying is a widely used economical strategy to tackle this issue, and many scientists and manufacturers are using it in their research, development, and production activities. In this review, the spray-drying process is described, as are recent trends in the encapsulation of fish oils, essential fatty acids, probiotics, phenolic compounds, and natural food colorants. The formulation and process conditions used in previous research and the results obtained are tabulated. Also, new innovations in bioactive encapsulation using nano-spray drying are described.