Optimization of ultrasound assisted extraction of pectin from custard apple peel: Potential and new source

Downstream Processing of Crude Ultrasound-Extracted Pectin From Saba Banana (Musa acuminata x balbisiana (BBB Group) "Saba") Peel

Ultrasound-assisted extraction of pectin from Saba banana (Musa acuminata x balbisiana (BBB Group) "Saba") peels produced crude pectin that requires further purification. Two downstream processes (alcohol washing (AW) and acid demethylation (AD)) were compared. AW involved gelatinous precipitate washing with 85% alcohol and pressing to squeeze out liquids, while AD involved a sequential AW of the dried pectin with 60% acidified alcohol, and 60% and 95% alcohol solutions. Results showed that both methods produced low methoxyl pectins with similar color, yield, and moisture content, with no significant (p > 0.05) differences observed. AD, however, produced pectin with better quality in terms of ash content and anhydrouronic acid (AUA) content relative to the control. Fourier transform infrared spectra revealed that the samples contain -OH, C-H, COO-, COO, and C-O groups, but only AD has COO-R due to structural modification. Overall, AD has the potential to improve the quality of crude ultrasound-extracted pectin from Saba banana peels. Yet, pre-extraction processing methods are necessary to meet FAO color standards for pectin.

Transformation of agricultural wastes into functional oligosaccharides using enzymes and emerging technologies

INTRODUCTION

Pectin-oligosaccharides (POS) serve diverse purposes as a food ingredient, antimicrobial and biostimulant in plants, and their functionality is linked to the degree of esterification. Grape and broccoli wastes emerge as environmentally friendly alternatives to obtaining pectin, serving as a sustainable source to producing POS. For example, microwaves have proven to be an effective and sustainable method to extract polysaccharides from plant matrices.

OBJECTIVE

This work aims to use grape and broccoli wastes as alternative sources for obtaining pectin by microwave-assisted extraction and biotransformation into POS, which possess biological properties.

MATERIAL AND METHODS

The extraction conditions were identified at a power of 400 W, 300 s for the extraction of pectin from grape pomace and broccoli waste. Biotransformation of pectins into POS, using commercial enzyme preparations (Viscozyme L and Pectinase). Characterisation was carried out by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy.

RESULTS

Physicochemical analysis indicated grape pomace and broccoli waste pectins had galacturonic acid content of 63.81 ± 1.67 and 40.83 ± 2.85 mg 100 mg-1, low degree of esterification of 34.89% and 16.22%, respectively. Biotransformation of pectins into POS resulted in a 20% hydrolysis rate. The main enzymatic activity was polygalacturonase for the degradation of the main structure of the pectin.

CONCLUSION

Production of POS from agro-industrial wastes by emerging technologies, such as the combined use of microwave-assisted extraction and enzymatic processes, represents an alternative method for the generation of bioactive compounds with distinctive properties suitable for different applications of interest.

Extraction of high methoxyl pectin from unripe waste Ponkan mandarine (Citrus reticulata Blanco cv. Ponkan) with an eco-friendly solvent

The aqueous batch extraction of pectin from unripe Ponkan mandarin was evaluated for potential application in the food industry. A small central composite design with 4 variables (temperature, volume to mass ratio, pH, and mean particle size) and 3 levels was applied for pectin extraction optimization. Also, the kinetic of the pectin yield extraction was investigated at temperatures 70-90 °C, stirring rate of 100-700 rpm, ultrasound pretreatment system, and modeling using four mathematical models. The pectin extraction process was evaluated by yield of pectin and esterification degree. FTIR, TGA, and DTA were performed to evaluate the quality of pectin obtained. The small central composite design demonstrated that temperature and volume to mass ratio were significant variables, and the highest yield of pectin extraction was 11.62 % obtained at temperature and volume to molar ratio of 81.9 °C and 33.9 v/w %, respectively. Besides, the esterification degree showed higher than 70 % for all extraction conditions, suggesting high methoxyl pectin. The kinetics showed the stirring rate and the ultrasound pretreatment did not cause any significant alteration, while high temperatures proved to be beneficial to the rate and the yield of the pectin extraction. The best fit was provided by Fick's law, suggesting the extraction process is limited by internal mass transfer. FTIR showed the functional groups expected for pectin, and TGA and DTA indicated that the pectin obtained is proper for most food products, as only above 200 °C the pectin should degrade.

Recent progress and treatment strategy of pectin polysaccharide based tissue engineering scaffolds in cancer therapy, wound healing and cartilage regeneration

Natural polymers and its mixtures in the form of films, sponges and hydrogels are playing a major role in tissue engineering and regenerative medicine. Hydrogels have been extensively investigated as standalone materials for drug delivery purposes as they enable effective encapsulation and sustained release of drugs. Biopolymers are widely utilised in the fabrication of hydrogels due to their safety, biocompatibility, low toxicity, and regulated breakdown by human enzymes. Among all the biopolymers, polysaccharide-based polymer is well suited to overcome the limitations of traditional wound dressing materials. Pectin is a polysaccharide which can be extracted from different plant sources and is used in various pharmaceutical and biomedical applications including cartilage regeneration. Pectin itself cannot be employed as scaffolds for tissue engineering since it decomposes quickly. This article discusses recent research and developments on pectin polysaccharide, including its types, origins, applications, and potential demands for use in AI-mediated scaffolds. It also covers the materials-design process, strategy for implementation to material selection and fabrication methods for evaluation. Finally, we discuss unmet requirements and current obstacles in the development of optimal materials for wound healing and bone-tissue regeneration, as well as emerging strategies in the field.

Application of combined Box-Behnken design with response surface methodology and desirability function in optimizing pectin extraction from fruit peels

BACKGROUND

This study aimed to extract pectin from various fruit peels, namely apple, orange, green citron, and pomegranate, and to evaluate the effects of various experimental conditions. The extraction was conducted at temperatures of 50-90 °C, with a solid-liquid ratio of 0.03-0.08 g/mL, for 120-180 min. The Box-Behnken design was applied in a three-level and four-factor factorial approach, including 29 experiments for each extraction, with varying conditions. The interaction effects were investigated. Each experiment's conditions were optimized.

RESULTS

The percentage yield varied (11.70-37.37%). The maximum yield was found in apples, whereas the lowest was in pomegranates.

CONCLUSION

Under optimized experimental conditions,high-quality pectin was extracted from pomegranate, orange, green citron, and apple peel waste. The extract was considered to be high methyl ester pectin with a degree of esterification greater than 50% and with an Anhydrouronic acid (AUA) content greater than 65%. The peel pectin that was studied could therefore be a food additive with numerous uses. The procedure developed here reuses waste resources effectively and contributes to a novel concept for exploring natural assets for use in food and pharmaceutical applications. © 2023 Society of Chemical Industry.

Valorization of pistachio industrial waste: Simultaneous recovery of pectin and phenolics, and their application in low-phenylalanine cookies for phenylketonuria

This study introduces a sustainable approach to simultaneously produce pectin and phenolic compounds from pistachio industrial waste and applies them in the formulation of low-phenylalanine cookies. The co-optimization process was performed using the microwave-assisted technique and a Box-Behnken design, considering four variables and two responses: pectin yield and total phenolic content (TPC). The co-optimized condition (microwave power of 700 W, irradiation time of 210 s, pH level of 1.02, and LSR of 20 mL/g) resulted in a pectin yield of 15.85 % and a TPC of 10.12 %. The pectin obtained under co-optimized condition was evaluated for its physicochemical, structural, and thermal properties and the phenolic extract for its antiradical activity. Characterization of the pectin sample revealed a high degree of esterification (44.21 %) and a galacturonic acid-rich composition (69.55 %). The average molecular weight of the pectin was determined to be 640.236 kDa. FTIR and 1H NMR spectroscopies confirmed the structure of pectin, with an amorphous nature and high thermal stability observed through XRD and DSC analysis. Additionally, the extract exhibited significant antiradical activity comparable to butylated hydroxyanisole and ascorbic acid. The isolated ingredients were used to formulate low-protein, low-phenylalanine cookies for phenylketonuria patients. The addition of 0.5 % pectin and 1 mL/g extract led to increased moisture content (from 9.05 to 12.89 %) and specific volume (from 7.28 to 9.90 mL/g), decreased hardness (from 19.44 to 10.39 N × 102), and improved antioxidant properties (from 5.15 % to 44.60 % inhibition) of the cookies. Importantly, there was no significant increase observed in the phenylalanine content of the samples with pectin and extract addition. Furthermore, sensory evaluation scores demonstrated significantly higher scores for taste, odor, texture, and overall acceptability in cookies enriched with 0.5 % pectin and 1 mL/g extract, with scores of 4.53, 3.93, 4.40, and 4.60, respectively.

Towards Valorization of Food-Waste-Derived Pectin: Recent Advances on Their Characterization and Application

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars' composition, the molecular weight, the galacturonic acid content, and technological-functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application.

Research progress on extraction of active components from apple processing waste

Apple waste (APW) is the residual product after apple processing, including apple peel, apple core, apple seed, and other components. A large quantity of APW produced is abandoned annually, leading to serious resource waste and environmental pollution. APW is rich in natural active compounds, such as pectin, polyphenols, fatty acids, and dietary fiber, which has a good use value. This paper reviewed the current research on recovering active components from APW. The traditional extraction methods (acid, alkali, physical, enzyme, etc.) and the novel extraction methods (SWE, UAE, MAE, RFAE, etc.) for the recovery of pectin, polyphenols, apple seed oil, apple seed protein, and dietary fiber from APW were systematically summarized. The basic principles, advantages, and disadvantages of different extraction methods were introduced. The requirements of different extraction methods on extraction conditions and the effects of different extraction methods on the yield, quality, and functional activity of extracted products were analyzed. The challenges and future study direction of APW extraction have prospected. This paper aims to provide a reference for other researchers interested in APW extraction, improve the utilization rate of APW and extend the value chain of the apple industry.

Microwave-assisted valorization and characterization of Citrus limetta peel waste into pectin as a perspective food additive

Machine learning techniques were employed to evaluate the effect of process parameters viz. microwave power (100 W, 300 W, 600 W); pH (1, 1.5, 2); and microwave time (the 60 s, 120 s, 180 s) on the pectin yield from Citrus limetta peel. A fourth-order polynomial function of 66.60 scales was used by the Support Vector Regression (SVR) model at an epsilon (ε) value of 0.003. The co-efficient of determination (R2) and root mean square error-values for training data and test data were 0.984; 0.77 and 0.993; 0.66 respectively. At optimized conditions, microwave power 600 W, pH 1, and time 180 s the best yield of 32.75% was obtained. The integrity of pectin skeletal was confirmed with FTIR and 1H NMR spectrums. The physicochemical analysis revealed that CLP is a high-methoxyl pectin (HMP) with a 63.20 ± 0.88% degree of esterification, 798.45 ± 26.15 equivalent weight, 8.06 ± 0.62% methoxyl content, 67.93 ± 3.36 AUA content, 6.27 ± 0.27 g water/g pectin WHC, 2.68 ± 0.20 g oil/g pectin OHC, low moisture, ash and protein content of 6.85 ± 0.10%, 3.87 ± 0.10% and 2.61 ± 0.06% respectively, which can be utilized as a food additive. Therefore, pectin extraction from Citrus limetta peel using a greener technique like MAE is an eco-friendly, time-saving approach to transform waste into a versatile food additive.

Physicochemical and functional properties of RG-I enriched pectin extracted from thinned-young apples

The demand for obtaining pectin from new sources has been continuously increasing. The abundant but underutilized thinned-young apple is a potential source of pectin. In this study, an organic acid (i.e., citric acid) and two inorganic acids (i.e., hydrochloric acid and nitric acid) commonly used in commercial pectin production were applied to extract pectin from three varieties of thinned-young apples. The physicochemical and functional properties of the thinned-young apple pectin were comprehensively characterized. The highest pectin yield (8.88 %) was obtained from Fuji apple using citric acid extraction. All pectin was high methoxy pectin (HMP) and rich in RG-I regions (>56 %). The citric acid extracted pectin had the highest molecular weight (Mw) and lowest degree of esterification (DE) values, and exhibited great thermal stability and shear-thinning property. Furthermore, Fuji-apple pectin possessed significantly better emulsifying properties compared to pectin obtained from the other two varieties of apples. Thus, pectin extracted with citric acid from Fuji thinned-young apples has great potential to be applied in the food industry as a natural thickener and emulsifier.

Food and fruit waste valorisation for pectin recovery: Recent process technologies and future prospects

Pectin possesses a dual property of resistance and flexibility and thus has diverse commercial value which has generated research interest on this versatile biopolymer. Formulated products using pectin could be useful in food, pharma, foam, plasticiser and paper substitute industries. Pectin is structurally tailor-made for greater bioactivity and diverse applications. Sustainable biorefinery leaves greener footprints while producing high-value bioproducts like pectin. The essential oils and polyphenols obtained as byproducts from a pectin-based biorefinery are useful in cosmetics, toiletries and fragrance industries. Pectin can be extracted from organic sources following eco-friendly strategies, and the extraction techniques, structural alterations and the applications are continually being upgraded and standardized. Pectin has great applications in diverse areas, and its green synthesis is a welcome development. In future, growing industrial application of pectin is anticipated as research orients on biopolymers, biotechnologies and renewable source-based processes. As the world is gradually adopting greener strategies in sync with the global sustainable development goal, active involvement of policy makers and public participation are prime. Governance and policy framing are essential in the transition of the world economy towards circularity since green circular bioeconomy is ill-understood among the public in general and within the administrative circles in particular. Concerted efforts by researchers, investors, innovators, and policy and decision makers to integrate biorefinery technologies as loops within loop of biological structures and bioprocesses is suggested. The review focusses on generation of the different nature of food wastes including fruits and vegetables with cauterization of their components. It discusses the innovative extraction and biotransformation approaches for these waste conversions into value-added products at cost-effective and eco-friendly way. This article compiles numerous effective and efficient and green way pectin extraction techniques with their advantages with varying success in an integrated manner.

Sustainable utilization of Citrus limetta peel for obtaining pectin and its application in cookies as a fat replacer

In this study, a five-factorial central composite design was employed to optimize pectin extraction from novel source, through ultrasound-assisted extraction. A 35.58% yield was obtained under optimized conditions of pH 1.0, solid (g): liquid (mL) ratio 1:24, amplitude 84.2 Hz, duty cycle 23 s/30 s, and time 30 min. The equivalent weight, methoxyl content, anhydrouronic acid content, degree of esterification, water-holding capacity, and oil-holding capacity of the extracted pectin were 796.40 ± 2.07, 8.29 ± 0.38%, 71.32 ± 0.54%, 64.66 ± 2.08%, 8.04 ± 0.10 g water/g pectin, and 2.24 ± 030 g oil/g pectin, respectively. The chemical profile of the extracted pectin was assessed with FTIR and NMR analyses. The extracted pectin was utilized as a butter substitute in cookies. Up to 30% butter in cookies could be replaced with the extracted pectin without altering the sensory and physicochemical properties. Overall, results of presented work suggest that using waste-derived pectin as a fat substitute in cookies offers a sustainable and health-promoting approach for converting waste into wealth.

Extraction optimization and characterization of pectin from sesame (Sesamum indicum L.) capsule as a new neglected by-product

BACKGROUND

With production of over 6 million tonnes a year of sesame, its capsules are considered to be an unutilized waste. In this study, extraction of pectin from this novel source was optimized using a green method, and the functional and physiochemical characteristics of the resultant pectin were compared to commercial pectin.

RESULTS

In this study, the sesame capsule pectin (SCP) extraction conditions were optimized to reach maximum yield, and the results showed that the maximum pectin extraction yield (138 g kg^-1 ) was obtained under optimal conditions (microwave power 700 W, irradiation time 5 min, pH 1.5, and liquid-to-solid ratio 41.8 (mL g^-1 ). The results showed that the pectin was low methoxyl type with a galacturonic acid content of 670 g kg^-1 . The extracted pectin had a high molecular weight (341 kDa) and surface charge (34.09 ± 1.88 mV) and exhibited 66% DPPH radical scavenging. The obtained results from ¹ H-nuclear magnetic resonance and Fourier transform infrared spectra validated the presence of pectin structure in the extracted sample.

CONCLUSION

Sesame capsule pectin, when compared to commercial pectin, demonstrated better functional properties in terms of emulsifying properties, oil holding capacity, foaming capacity and antioxidant activity. SCP showed similar properties in comparison to its commercial counterpart, which suggests that it could well be considered as a new and suitable source for pectin extraction. © 2022 Society of Chemical Industry.

Valorization of Agro-Industrial Wastes by Ultrasound-Assisted Extraction as a Source of Proteins, Antioxidants and Cutin: A Cascade Approach

The use of agro-industrial wastes to obtain compounds with a high added-value is increasing in the last few years in accordance with the circular economy concept. In this work, a cascade extraction approach was developed based on ultrasound-assisted extraction (UAE) for tomato, watermelon, and apple peel wastes. The protein and antioxidant compounds were obtained during the first extraction step (NaOH 3 wt.%, 98.6 W, 100% amplitude, 6.48 W/cm², 6 min). The watermelon peels (WP) showed higher proteins and total phenolic contents (857 ± 1 mg BSA/g extract and 107.2 ± 0.2 mg GAE/100 g dm, respectively), whereas the highest antioxidant activity was obtained for apple peels (1559 ± 20 µmol TE/100 g dm, 1767 ± 5 µmol TE/100 g dm, and 902 ± 16 µmol TE/100 g dm for ABTS, FRAP and DPPH assays, respectively). The remaining residue obtained from the first extraction was subsequently extracted to obtain cutin (ethanol 40 wt.%, 58 W, 100% amplitude, 2 W/cm², 17 min, 1/80 g/mL, pH 2.5). The morphological studies confirmed the great efficiency of UAE in damaging the vegetal cell walls. WP showed a higher non-hydrolysable cutin content (55 wt.% of the initial cutin). A different monomers’ profile was obtained for the cutin composition by GC-MS, with the cutin from tomato and apple peels being rich in polyhydroxy fatty acids whereas the cutin extracted from WP was mainly based on unsaturated fatty acids. All of the cutin samples showed an initial degradation temperature higher than 200 °C, presenting an excellent thermal stability. The strategy followed in this work has proved to be an effective valorization methodology with a high scaling-up potential for applications in the food, pharmaceutical, nutraceutical, cosmetics and biopolymer sectors.

A review of the polyphenols extraction from apple pomace: novel technologies and techniques of cell disintegration

Apple pomace, a solid waste produced during industrial processing of apple juice or cider, is a rich source of high value-added compounds such as polyphenols. This review summarizes present studies on the qualitative and quantitative methods, including Folin-Ciocalteu colorimetric, high pressure liquid chromatography (HPLC) and fluorescence spectrum, as well as enhanced extraction methods of polyphenols in apple pomace by different traditional and novel technologies, including ultrasounds (US), microwave (MW), pulsed electric fields (PEF), high voltage electrical discharges (HVED) and enzyme. The principles and characteristics of different effective enhanced extraction technologies of polyphenols in apple pomace were compared. In addition, the different cell disruption analysis methods, such as destructive detection method (electrical conductivity disintegration index, Zc), image analysis method (including scanning electron microscopy, SEM, and confocal laser scanning microscopy, CLSM), and nondestructive method (such as magnetic resonance imaging, MRI) are presented in this review. The study proved that there was a correlation between destructive detection method and image analysis method. However, each of the technologies reviewed in this study has some disadvantages to overcome, and some mechanisms need to be further substantiated. Therefore, more competitive techniques for polyphenols extraction and analysis of cell disintegration are needed to emerge in the future.

Valorization of citrus peel waste for the sustainable production of value-added products

Globally the generation and mismanagement of waste from fruit processing and post-harvest impose a severe burden on waste management strategies along with environmental pollution, health hazards. Citrus waste is one of such worrying fruit waste, which is rich in several value-added chemicals, including pectin. Pectin is a prebiotic polysaccharide possessing a multitude of health benefits. Citrus pectin has excellent gelling, thickening, water holding capacity, and encapsulating properties, which pave its functionality in versatile industrial fields including food processing and preservation, drug and therapeutic agents, cosmetics, and personal care products. The utilization of citrus wastes to derive valuable bioproducts can offer an effective approach towards sustainable waste management. With the ever-increasing demand, several strategies have been devised to increase the efficiency of pectin recovery from citrus waste. This review article discusses the sources, effect, and technology-mediated valorization of citrus waste, the functional and nutritive application of pectin along with its socio-economic and environmental perspective.

Cosmeceutical Potential of Major Tropical and Subtropical Fruit By-Products for a Sustainable Revalorization

The increasing production of tropical fruits followed by their processing results in tons of waste, such as skins or seeds. However, these by-products have been reported to be rich in bioactive compounds (BACs) with excellent properties of interest in the cosmeceutical industry: antioxidant, anti-aging, anti-inflammatory, antimicrobial and photoprotective properties. This review summarizes the tropical fruits most produced worldwide, their bioactive composition and the most important and studied therapeutic properties that their by-products can contribute to skin health, as well as the different approaches for obtaining these compounds using techniques by conventional (Soxhlet, liquid-liquid extraction or maceration) and non-conventional extractions (supercritical fluid extraction (SFE), ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), pressurized liquid extraction (PLE) and two-phase aqueous system), followed by their identification by HPLC-MS or GC-MS analysis. Moreover, this work encompasses several studies that may prove the effects of seeds and skins from tropical fruits against oxidative stress, hyperpigmentation, acne, aging or UV radiation. Therefore, the investigation of functional components present in tropical fruit by-products under a circular bioeconomy model could be of great interest for the cosmeceutical industry and a very promising option for obtaining new cosmeceutical formulations.

High-quality pectin from cantaloupe waste: eco-friendly extraction process, optimization, characterization and bioactivity measurements

BACKGROUND

The rind from cantaloupe is an agricultural waste of cantaloupe industrial processing. The current study tried to (i) evaluate the potential use of cantaloupe rind as a pectin source, (ii) optimize the factors of microwave-assisted extraction process using Box-Behnken design, and (iii) characterize the isolated pectin using various physicochemical, structural, functional and bioactivity properties.

RESULTS

Four variables of the extraction process were successfully optimized at a microwave power of 700 W, irradiation time of 112 s, pH value of 1.50 and liquid to solid (LS) value of 30 mL g^-1 , with a yield of 181.4 g kg^-1 . The analysis indicated a high-methylated galacturonic acid-rich (703.4 g kg^-1 ) sample with an average molecular weight of 390.475 kDa. Also, the isolated pectin showed considerable functionality and antioxidant ability. The main functional groups, structural characteristics and crystallinity of samples were comparatively studied using Fourier transform infrared, nuclear magnetic resonance and X-ray diffraction spectroscopies.

CONCLUSION

In comparison to commercial citrus pectin, isolated pectin showed a significantly higher value for most of the functional analysis such as oil holding capacity, emulsifying capacity, emulsion stability, DPPH^• and ABTS^•+ scavenging activity, and reducing power assay. In other analyses the isolated sample was close to the commercial one, indicating that cantaloupe rinds should be considered as a suitable additional resource for pectin production. © 2021 Society of Chemical Industry.

Encapsulation of phenolic compounds within food-grade carriers and delivery systems by pH-driven method: a systematic review

In comparison to conventional encapsulation methods of phenolic compounds (PCs), pH-driven method is green, simple and requires low energy consumption. It has a huge potential for industrial applications, and can overcome more effectively the aqueous solubility, stability and bioavailability issues related to PCs by changing pH to induce the encapsulation of PCs. This review aims to shed light on the use of pH-driven method for encapsulating PCs. The preparation steps and principles governing pH-driven method using various carriers and delivery systems are provided. A comparison of pH-driven with other methods is also presented. To circumvent the drawbacks of pH-driven method, improvement strategies are proposed. The essence of pH-driven method relies simultaneously on alkalization and acidification to bind PCs and carriers. It is used for the development of nanoemulsions, liposomes, edible films, nanoparticles, nanogels and functional foods. As a result of pH-driven method, PCs-loaded carriers may have smaller size, high encapsulation efficiency, more sustained-release and good bioavailability, due mainly to effects of pH change on the structure and properties of PCs as well as carriers. Finally, modification of wall materials and type of acidifier are considered as efficient approaches to improve the pH-driven method.

Sonication, a Potential Technique for Extraction of Phytoconstituents: A Systematic Review

Traditional extraction techniques have lost their optimum performance because of rising consumer demand and novel technologies. In this regard, several techniques were developed by humans for the extraction of plant materials from various indigenous sources, which are no longer in use. Many of the techniques are not efficient enough to extract maximum plant material. By this time, evolution in extraction has led to development of various techniques including microfiltration, pulsed electric fields, high pressure, microwave assistance, enzyme assistance, supercritical fluid, subcritical fluid and ultrasonication. These innovations in food processing/extraction are known as “Green Food Processing”. These technologies were basically developed by focusing on three universal parameters: simplicity, energy efficiency and economy. These green technologies are practical in a number of different food sectors, mostly for preservation, inhibition of microorganisms, inactivation of enzymes and extraction of plant material. Like the others, ultrasonication could also be used for the said purposes. The primary objective of this review is to confine the potential use of ultrasonication for extraction of oils, pectin and phytochemicals by reviewing the literature systematically.

Extraction, Characterization, and Applications of Pectins from Plant By-Products

Currently, pectins are widely used in the cosmetic, pharmaceutical, and food industries, mainly as texturizing, emulsifying, stabilizing, and gelling agents. Pectins are polysaccharides composed of a large linear segment of α-(1,4) linked d-galactopyranosyluronic acids interrupted by β-(1,2)-linked l-rhamnoses and ramified by short chains composed of neutral hexoses and pentoses. The characteristics and applications of pectins are strongly influenced by their structures depending on plant species and tissues but also extraction methods. The aim of this review is therefore to highlight the structures of pectins and the various methods used to extract them, including conventional ones but also microwave heating, ultrasonic treatment, and dielectric barrier discharge techniques, assessing physico-chemical parameters which have significant effects on pectin characteristics and applications as techno-functional and bioactive agents.

Sugar beet pectin extracted by ultrasound or conventional heating: a comparison

The yield and quality of sugar beet pulp pectin obtained by ultrasound-assisted extraction (UAE) were compared to those obtained by conventional heating. Extraction temperature (70-90) °C, extraction time (2-4) h and pH (1-1.5) were considered as the variables for the conventional extraction while ultrasound frequency (20-60) kHz, time (10-30) min and amplitude (60-100%) were considered as the variables for UAE. The optimal conditions for maximum yield of pectin for conventionally and ultrasonically extracted pectin were determined by the central composite design and the Box Behnken design, respectively. The optimum conditions of conventional extraction were the temperature of 90 °C, time of 4 h and pH of 1. The optimum conditions of UAE were ultrasound frequency of 20 kHz, time of 10 min, and ultrasound amplitude of 96%. Extraction using the optimized conditions of conventional heating and UAE achieved the best yield of 20.75% and 20.85%, respectively. The degree of methyl esterification, ferulic acid content and molecular weight of UAE pectin were higher than conventionally extracted pectin but the content of galacturonic acid in UAE pectin was lower than that of conventionally extracted pectin. The infrared spectra of both pectins revealed the occurrence of polysaccharide component. The pectin achieved by UAE had higher lightness value than conventionally extracted pectin, confirming its application in different products partially in bright food products. The UAE pectin possessed higher viscosity than conventionally extracted pectin. The addition of UAE pectin increased all of the DSC gelatinization parameters. Overall, UAE could be a promising scalable and economical approach to obtain pectin with unique characteristics.

Dietary Fiber and Prebiotic Compounds in Fruits and Vegetables Food Waste

The fruits and vegetables processing industry is one of the most relevant food by-products, displaying limited commercial exploitation entailing economic and environmental problems. However, these by-products present a considerable amount of dietary fiber and prebiotics with important biological activities, such as gut microbiota modulation, lowering the glycemic load and replacing some unhealthy ingredients with an impact on food texture. Therefore, the international scientific community has considered incorporating their extracts or powders to preserve or fortify food products an area of interest, mainly because nowadays consumers demand the production of safer and health-promoting foods. In the present review, literature, mainly from the last 5 years, is critically analyzed and presented. A particular focus is given to utilizing the extracted dietary fibers in different food products and their impact on their characteristics. Safety issues regarding fruits and vegetables wastes utilization and anti-nutritional compounds impact were also discussed.

Delineating the inherent functional descriptors and biofunctionalities of pectic polysaccharides

Pectin is a plant-based heteropolysaccharide macromolecule predominantly found in the cell wall of plants. Pectin is commercially extracted from apple pomace, citrus peels and sugar beet pulp and is widely used in the food industry as a stabilizer, emulsifier, encapsulant, and gelling agent. This review highlights various parameters considered important for describing the inherent properties and biofunctionalities of pectins in food systems. These inherent descriptors include monosaccharide composition, galacturonic acid content, degree of esterification, molecular weight, structural morphology, functional group analysis, and functional properties, such as water and oil holding capacity, emulsification, foaming capacity, foam stability, and viscosity. In this study, we also delineate their potential as a nutraceutical, prebiotic, and carrier for bioactive compounds. The biofunctionalities of pectin as an anticancer, antioxidant, lipid-lowering, and antidiabetic agent are also conceptually elaborated in the current review. The multidimensional characteristics of pectin make it a potential candidate for use in food and biomedical science.

Strategies to Increase the Biological and Biotechnological Value of Polysaccharides from Agricultural Waste for Application in Healthy Nutrition

Nowadays, there is a growing interest in the extraction and identification of new high added-value compounds from the agro-food industry that will valorize the great amount of by-products generated. Many of these bioactive compounds have shown beneficial effects for humans in terms of disease prevention, but they are also of great interest in the food industry due to their effect of extending the shelf life of foods by their well-known antioxidant and antimicrobial activity. For this reason, an additional research objective is to establish the best conditions for obtaining these compounds from complex by-product structures without altering their activity or even increasing it. This review highlights recent work on the identification and characterization of bioactive compounds from vegetable by-products, their functional activity, new methodologies for the extraction of bioactive compounds from vegetables, possibly increasing their biological activity, and the future of the global functional food and nutraceuticals market.

Preparation, characterization, antioxidant and anti-inflammatory activities of acid-soluble pectin from okra (Abelmoschus esculentus L.)

Currently, there are few studies on acid-soluble pectin from okra, especially in biological activity for antioxidant and anti-inflammatory. In this study, the antioxidant properties of acid-soluble okra pectin components and their anti-inflammatory were explored. Firstly, two acid-soluble okra pectic fractions, namely crude acid-soluble okra pectin (CAOP) and acid-soluble okra pectin (AOP), were obtained and exhibited structural and compositional variation. The two pectic fractions contained a low degree of esterification (42.0-46.5%) and a relatively high uronic acid content (31.6-37.3%). AOP was composed of galacturonic acid (79.1 mol/%), galactose (4.3 mol/%), rhamnose (14.5 mol/%) and xylose (2.1 mol/%), and the molecular weight was 92.8 kDa. Morphological and thermal properties of acid-soluble okra pectin components were also investigated. Compared to CAOP, AOP expressed better antioxidant activity, and suppressed the NO production in LPS-induced RAW 264.7 macrophages. All the above results indicated that AOP had the potential to act as a natural antioxidant or a functional anti-inflammatory food, which would broaden the development and utilization of okra resources.

A novel cholesterol-free mayonnaise made from Pickering emulsion stabilized by apple pomace particles

Yolk-based mayonnaise is widely used to enhance the flavor of daily food. In view of health concerns on dietary cholesterol, novel mayonnaises (NMs) were made from Pickering emulsions stabilized by apple pomace particles using micro-jet (MJ-NM), ultrasonic (US-NM), and high-speed-shear homogenizer (HSS-NM), respectively. NMs and commercial mayonnaise (CM) were comparatively investigated in appearance, droplet size, rheological, tribological, and stability properties. NMs presented almost identical appearances to CM except for color. The droplets' size in NMs were larger than CM. Both NMs and CM demonstrated shear-thinning behavior and solid-like properties. Among mayonnaises, MJ-NM was demonstrated the most rapid thixotropy recovery with its storage modulus recovered within 51 s. Although both NMs and CM were of mixed tribology nature, NMs presented lower oral lubricity. Upon 210-day storage, both NMs and CM exhibited excellent stabilities without any oil-water separation occurred. Overall, the Pickering emulsions are promising and health alternatives for traditional mayonnaise.

Microwave and ultrasound assisted extraction of pectin from various fruits peel

Pectin, found in the cell walls of fruits and vegetables, is a complex colloidal polysaccharide. In this study, pectin was extracted using ultrasound and microwave-assisted extraction methods from waste lemon, mandarin, and kiwi peel to investigate their use as alternative source of pectin. Hydrochloric acid (HCl) and nitric acid (HNO₃) were used as the extracting agents. The effects of microwave power (360-600 W) and irradiation time (1, 2, 3 min) for microwave-assisted extraction (MAE) and of temperature (60 and 75 °C) and sonication time (15, 30, 45 min) on ultrasound-assisted extraction (UAE) on the yield of extracted pectin from the peels were investigated. Optimum conditions were determined for the extraction of pectin from all of the peel samples with the two extraction methods. The produced pectin yield and the degree of esterification were determined and, FT-IR and SEM analyses were performed. Kiwi peel gave the highest yield of extracted pectin using HCl as the solvent with 17.30% yield via UAE at 75 °C for 45 min and 17.97% yield via MAE at 360 W for, 3 min. It was concluded that lemon, mandarin, and kiwi peels all contained pectin and that MAE gave a better yield than UAE and could thus be used as an efficient and rapid technique for the extraction of pectin from the peels. The chemical structures of the pectin obtained using the two different extraction methods were similar and showed a high degree of methoxylation.

Recent Trends in the Use of Pectin from Agro-Waste Residues as a Natural-Based Biopolymer for Food Packaging Applications

Regardless of the considerable progress in properties and versatility of synthetic polymers, their low biodegradability and lack of environmentally-friendly character remains a critical issue. Pectin is a natural-based polysaccharide contained in the cell walls of many plants allowing their growth and cell extension. This biopolymer can be extracted from plants and isolated as a bioplastic material with different applications, including food packaging. This review aims to present the latest research results regarding pectin, including the structure, different types, natural sources and potential use in several sectors, particularly in food packaging materials. Many researchers are currently working on a multitude of food and beverage industry applications related to pectin as well as combinations with other biopolymers to improve some key properties, such as antioxidant/antimicrobial performance and flexibility to obtain films. All these advances are covered in this review.