Development of active, water-resistant carboxymethyl cellulose-poly vinyl alcohol-Aloe vera packaging film

Inhibition of Pectobacterium carotovorum-mediated potato soft rot by carboxymethyl cellulose-based antibacterial edible coating containing green tea extract

This study was conducted to propose a new strategy for preventing Pectobacterium carotovorum-mediated potato soft rot through the development of a carboxymethyl cellulose (CMC)-based antibacterial coating incorporated with green tea extract (GTE). GTE/CMC films resulted in increased water vapor permeability due to the incorporation of polar groups in GTE. In the antibacterial test against P. carotovorum, the MBC value of GTE was 2 mg/mL. The time-kill assay demonstrated that GTE/CMC (2 × MBC) completely eradicated bacteria within 0.5 h (~6.4 log CFU/mL reduction). The potential of GTE/CMC to prevent potato soft rot was evaluated by monitoring the potato appearance, maceration area, and texture properties. The GTE/CMC-coated potatoes exhibited significantly reduced maceration area and remained firm for 3 days. Moreover, there was no change in the antimicrobial efficacy for 8 weeks. The developed GTE/CMC could be used as a biological coating system for postharvest storage and soft rot prevention.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-024-01548-6.

Green synthesis of non-isocyanate hydroxyurethane and its hybridization with carboxymethyl cellulose to produce films

Non-isocyanate polyurethanes (NIPUs) have attracted increasing attention as a sustainable alternative to conventional isocyanate-based polyurethanes. This study synthesized non-isocyanate hydroxyurethanes (NIHUs) through an addition reaction between propylene carbonate (PC) and 1,2-ethylenediamine (EDA). The resulting NIHU was then hybridized with carboxymethyl cellulose (CMC) to investigate its hybridization potential. Structural analysis through FTIR, NMR, and XRD confirmed the crystalline nature of NIHU, featuring urethane bonds and abundant hydroxyl groups. It was found that NIHU and CMC interacted by forming hydrogen bonds between hydroxyl groups of NIHU and carboxyl groups of CMC, resulting in a dense CMC/NIHU hybrid structure. NMR and XRD analyses revealed changes in the hybrids' chain mobility, the Young's modulus of the hybrid with 30 % NIHU content decreased from 1627 MPa to 502 MPa relative to CMC, and the elongation at break increased from 4.44 % to 17.2 %. Increasing the concentration of NIHU in CMC reduced the hydrophobicity, in terms of water contact angle, from 70° to 41.7°. The simplicity of the synthesis method for NIHU, coupled with the desirable structure, strength, and balanced flexibility of CMC/NIHU hybrids, is expected to facilitate the production of NIHU-rich hybrids and increase their application in packaging.

Toxicity of water-soluble polymers polyethylene glycol and polyvinyl alcohol for fish and frog embryos

Personal Care Products (PCPs) have been one of the most studied chemicals in the last twenty years since they were identified as pseudo-persistent pollutants by the European Union in the early 2000s. The accumulation of PCPs in the aquatic environment and their effects on non-target species make it necessary to find new, less harmful, substances. Polyethylene glycol (PEGs) and polyvinyl alcohol (PVAs) are two polymers that have increased their presence in the composition of PCPs in recent years, but little is known about the effect of their accumulation in the environment on non-target species. Through embryotoxicity tests on two common models of aquatic organisms (Danio rerio and Xenopus laevis), this work aims to increase the knowledge of PEGs and PVAs' effects on non-target species. Animals were exposed to the pollutant for 96 h. The main embryotoxicity endpoint (mortality, hatching, malformations, heartbeat rate) was recorded every 24 h. The most significant results were hatching delay in Danio rerio exposed to both chemicals, in malformations (oedema, body malformations, changes in pigmentation and deformations of spine and tail) in D. rerio and X. laevis and significant change in the heartbeat rate (decrease or increase in the rate) in both animals for all chemicals tested.

Citric acid crosslinked carboxymethyl cellulose edible films: A case study on preserving freshness in bananas

The study involves the preparation and characterization of crosslinked-carboxymethyl cellulose (CMC) films using varying amounts of citric acid (CA) within the range 5 %-20 %, w/w, relative to the dry weight of CMC. Through techniques such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, carbonyl content analysis, and gel fraction measurements, the successful crosslinking between CMC and CA is confirmed. The investigation includes an analysis of chemical structure, physical and optical characteristics, swelling behavior, water vapor transmission rate, moisture content, and surface morphologies. The water resistance of the cross-linked CMC films exhibited a significant improvement when compared to the non-crosslinked CMC film. The findings indicated that films crosslinked with 10 % CA demonstrated favorable properties for application as edible coatings. These transparent films, ideal for packaging, prove effective in preserving the quality and sensory attributes of fresh bananas, including color retention, minimized weight loss, slowed ripening through inhibiting amyloplast degradation, and enhanced firmness during storage.

Development of eco-friendly biofilms by utilizing microcrystalline cellulose extract from banana pseudo-stem

Banana pseudo-stem, often considered as an underutilized plant part was explored as a potential reinforced material to develop an eco-friendly biofilm for food packaging applications. In this study, Microcrystalline cellulose (MCC) was extracted from banana pseudo-stem by alkali and acid hydrolysis treatment. The extracted MCC was used as a reinforced material in different concentrated polyvinyl alcohol (PVA) matrix alone as well as both PVA and Carboxymethyl Cellulose (CMC) matrix to develop biofilm by solvent casting method. The synthesized MCC powder was characterized by scanning electron microscope to ensure its microcrystalline structure and to observe surface morphology. The biofilms composed of MCC, PVA, and CMC were assessed through Fourier-transform infrared spectroscopy (FTIR), mechanical properties, water content, solubility, swelling degree, moisture barrier property (Water Vapor Permeability - WVP), and light barrier property (Light Transmission and Transparency). The FTIR analysis showed the rich bonding between the materials of the biofilms. The film incorporating a combination of PVA, CMC, and MCC (S6) exhibited the highest tensile strength at 26.67 ± 0.152 MPa, making it particularly noteworthy for applications in food packaging. MCC incorporation increased the tensile strength. The WVP content of the films was observed low among the MCC-induced films which is parallel to other findings. The lowest WVP content was showed by 1% concentrated PVA with MCC (S4) (0.223 ± 0.020 10-9 g/Pahm). The WVP content of S6 film was also considerably low. MCC-incorporated films also acted as a good UV barrier. Transmittance of the MCC induced films at UV range were observed on average 38% (S2), 36% (S4) and 6% (S6) which were almost 6% lower than the control films. The S6 film demonstrated the lowest swelling capacity (1.42%) and water content, indicating a significantly low solubility of the film. The film formulated with mixing of PVA, CMC and MCC (S6) was ahead in terms of food packaging characteristics than other films. Also, the outcomes of this study point out that MCC can be a great natural resource for packaging applications and in that regard, banana pseudo-stem proves to be an excellent source for waste utilization.

A co-type ductile film with high tensile strength and fast self-healing properties for shaped fruit preservation

Traditional petroleum-based plastics have high energy consumption, require professional equipment, are non-degradable after use, and lack antibacterial properties, making it impossible to achieve long-lasting freshness in fruits and vegetables. Herein, we report a novel co-type film-forming method with low energy consumption and without production equipment, which uses PVA-borax gel as a substrate and adds a certain proportion of CMC and TA to prepare multifunctional CMC/TA@PVA-borax composite hydrogels (CTPB). The dynamic borax ester bonding and hydrogen bonding in the CTPB hydrogel results in an ultra-high tensile strength of more than 5500% and rapid self-healing within 8 s. Interestingly, hydrogels can be arbitrarily shaped and stretched like play dough and thus can be stretched into ductile films by co-type film formation. The antimicrobial properties of the hydrogel film can be attributed to the synergistic effects of TA and borax. The mussel structure of TA allows the hydrogel film to adhere directly to different surfaces for more effective bacterial killing. In addition, the hydrogel film has a high level of biosafety and biodegradability and shows good performance in fruit storage. This study provides a convenient and low-energy method for the preparation of films, which in part reduces the increasing environmental pollution caused by petroleum-based plastics.

Facile exfoliation and physicochemical characterization of Thespesia populnea plant leaves based bioplasticizer macromolecules reinforced with polylactic acid biofilms for packaging applications

Plasticizers are active ingredients added to the polymer to increase its workability. Since synthetic plasticizer is not ecofriendly and toxic in nature, it is a real cause for concern. On this basis, our study focuses on plasticizer extraction from plant-based resources. In this research work, Thespesia populnea leaves are utilized for the isolation of biological macromolecules with a plasticizing effect for biofilm applications. This extraction process is done through solvent extraction, amination, slow pyrolysis, and surface catalysis process. The physico-chemical and microstructural characterization of novel plasticizer particles were studied for the first time. The lower crystallinity index and crystalline size obtained from X-ray diffraction is 50.08 % and 20.45 nm respectively. Energy dispersive spectroscopy, particle sizer analysis, atomic force microscopy, and scanning electron microscopy are used to assess surface morphology of this plasticizer. The thermogram and differential thermal analysis curves give the information about degradation behavior of plasticizers and their thermal stability. The glass transition temperature of the extracted plasticizer is 60.56 °C. The plasticizing effect of the plasticizer is studied through film fabrication of polylactic acid which was blended with the extracted plasticizer. The mechanical property of biofilm was improved with the addition of plasticizer. The elongation break percentage (for 5 % plasticizer 46.12 %) was increased compared to others with moderate tensile strength. However, the tensile and elongation modulus decreases with the increase of plasticizer content. The crystallinity of the PLA film was improved after the plasticization. The thermal stability also increased with 3 % addition of the plasticizer. The isolated plasticizer was soluble in water and its molecular weight ≈380.

Recent advances in carboxymethyl cellulose-based active and intelligent packaging materials: A comprehensive review

Researchers have concentrated on innovative approaches to increase the shelf life of perishable food products and monitor their quality during storage and transportation as consumer demand for safe, environmentally friendly, and effective packaging develops. This comprehensive review aims to provide an overview of recent developments in carboxymethyl cellulose (CMC) chemical synthesis and its applications in active and intelligent packaging materials. It explores various methods for modifying cellulose to produce CMC and highlights the unique properties that make it suitable for addressing packaging industry challenges. The integration of CMC into active packaging systems, which helps reduce food waste and enhance food preservation, is discussed in depth. Furthermore, the integration of CMC in smart sensors and indicators for real-time monitoring and quality assurance in intelligent packaging is examined. The chemical synthesis of CMC and strategies to optimise its properties were studied, and the review concluded by examining the challenges and prospects of CMC-based packaging in the industry. This review is intended to serve as a valuable resource for researchers, industry professionals, and policymakers interested in the evolving landscape of CMC and its role in shaping the future of packaging materials.

Carboxymethyl cellulose/poly (vinyl alcohol) based active film incorporated with tamarind seed coat waste extract for food packaging application

Incorporating a bioactive food waste extract into biodegradable polymers is a promising green approach to producing active films with antioxidant and antibacterial activity for food packaging. Active packaging films from carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) incorporated with tamarind seed coat waste extract (TS) were prepared by solvent casting method using citric acid as a crosslinking agent. The effect of TS content on the film properties was determined by measuring the optical, morphology, mechanical, water vapor transmission rate (WVTR), antioxidant, and antimicrobial attributes. The CMC/PVA-TS films were also tested on fresh pork. The addition of TS did not significantly affect the film structure and WVTR but it improved the mechanical and UV barrier properties. The films possessed antioxidant and antimicrobial ability against bacteria (S. aureus and E. coli). Thus, CMC/PVA packaging was successfully prepared, and the incorporation of TS enhanced the antioxidant and antimicrobial properties of the film, which extended the shelf-life of fresh pork.

Multifunctional composite films based on polyvinyl alcohol, quaternary ammonium salt modified cellulose nanofibers and tannic acid-iron ion coordination complexes for food packaging

The development of sustainable and well-performing food packaging materials takes on critical significance, whereas it is still challenging. To overcome the shortcomings of polyvinyl alcohol (PVA) as a degradable packaging material, in this work, hydrophobic quaternary ammonium salt (QAS) modified cellulose nanofibers (CNF) and tannic acid‑iron ion coordination complexes (TA-Fe) were adopted for the preparation of functional PVA films. The modified CNF (CNF-QAS) not only improved the mechanical properties and water resistance of PVA, but also endowed it with antibacterial ability. In addition, the synergistic antibacterial capability with CNF-QAS was achieved using TA-Fe with photothermal therapy. As a result, the modulus, elongation at break, tensile strength, and water contact angle of the prepared PVA films were examined as 88 MPa, 200 %, 11.7 MPa, and 94.8°, respectively. Furthermore, with the assistance of CNF-QAS and TA-Fe, the films inhibited the growth of E. coli and S. aureus by 99.8 % and 99.7 %, respectively, and they exhibited high cell viability of 90.5 % for L929 fibroblasts. Based on the above encouraging properties, the functional PVA films could significantly extend the shelf life of oranges for over two weeks, proving the excellent application prospects in the food packaging field.

Chitosan-based films blended with moringa leaves and MgO nanoparticles for application in active food packaging

This study aims to address the issue of environmental pollution caused by non-biodegradable petroleum-based food packaging by exploring the application of biodegradable films. Film casting was employed to fabricate food packaging films from chitosan (CS) and polyvinyl alcohol (PVA) polymers blended with moringa extract (MoE) and various concentrations of magnesium oxide nanoparticles (MgO NPs). The films were characterized through multiple techniques, including UV spectroscopy, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDX), X-ray Diffraction (XRD), and Fourier-transform Infrared Spectroscopy (FTIR). The study investigated the physicomechanical properties, water solubility, water vapor transmission rate, oxygen permeability, migration test, biodegradability, contact angle, anti-fogging, antibacterial and antifungal activity, and application of the films for food packaging. The results showed that blending CS/PVA films with MoE and MgO NPs significantly improved their mechanical properties. The highest tensile strength of 98 MPa was observed in the CPMMgO-0.5 film. The solubility of the films was low, with CPMMgO-0 and CPMMgO-0.25 demonstrating the lowest solubility as weight decreased by 3.41 % and 3.47 %, respectively. The water vapor transmission rate and oxygen permeability decreased with increasing MgO NP concentrations, with the CPMMgO-0.5 film exhibiting the lowest values. The films also demonstrated good biodegradability, anti-fogging ability, antibacterial and antifungal activity, and low water solubility, enabling bead encapsulation over 14 days in good condition. Moreover, the thermal stability of the films was improved, extending the shelf life of bread. Therefore, the fabricated films provide a promising alternative to non-degradable plastic packaging, which heavily contributes to environmental pollution.

Vanillin Cross-Linked Chitosan Film with Controlled Release of Green Tea Polyphenols for Active Food Packaging

We report a novel cross-linked chitosan composite film containing vanillin, glycerol, and green tea extract. The effects of vanillin-mediated cross-linking and the incorporation of antimicrobial green tea polyphenols were investigated. The cross-linking effect, confirmed by Fourier transform infrared (FTIR) analysis, increased the tensile strength of the biopolymer film to 20.9 ± 3 MPa. The release kinetics of polyphenols from the chitosan-vanillin matrix was studied, and we reported an initial burst release (8 h) followed by controlled release (8 to 400 h). It was found that both vanillin and green tea polyphenols were successful inhibitors of foodborne bacteria, with a minimum inhibitory concentration of the tea polyphenols determined as 0.15 mg/mL (Staphylococcus aureus). These active components also displayed strong antioxidant capacities, with polyphenols quenching >80% of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals at all concentrations tested. Degradation results revealed that there was a significant (>85%) mass loss of all samples after being buried in compost for 12 weeks. The biopolymeric films, prepared by solvent casting methods, adhere to green chemistry and waste valorization principles. The one-pot recipe reported may also be applied to other cross-linkers and active compounds with similar chemical functionalities. Based on the obtained results, the presented material provides a promising starting point for the development of a degradable active packaging material.

Combined Effect of Citric Acid and Polyphenol-Rich Grape Seed Extract towards Bioactive Smart Food Packaging Systems

Alginate films (2% w·v^-1) were prepared with varying concentrations (5-20% w/w) of citric acid and aqueous grape seed extract (GSE) filtrate (11.66 ± 1.32 g GAE/L) using the solvent-evaporation method. Crosslinking alginate via ester bonds (FTIR analysis) with citric acid up to 10% (w/w) led to a 33% increase in tensile strength, a 34% reduction in water vapor transmission rate (WVTR), and had no impact on elongation at break. Crosslinking alginate with citric acid in the presence of GSE increased the tensile strength by 17%, decreased WVTR by 21%, and significantly improved DPPH scavenging activity. Moreover, after incubation for 24 h at 37 °C, the film-forming solutions exhibited increased antimicrobial activity, resulting in 0.5- and 2.5-log reductions for Escherichia coli and Staphylococcus aureus, respectively, compared to the values obtained without the addition of GSE. The stronger inhibitory effect observed against Gram-positive bacteria can be attributed to the unique composition and structure of their cell walls, which creates a barrier that restricts the penetration of polyphenols into the cells. The pH adjustment of the GSE film-forming solution from 2.0 to 10.0 shifted the UV/VIS absorption spectra, resulting in a colour change from yellow to red. The findings of this study have showcased the potential of combining GSE and citric acid to enhance the functionality and bioactivity of alginate films for applications in smart food packaging.

Development of fish gelatin/carrageenan/zein bio-nanocomposite active-films incorporated with turmeric essential oil and their application in chicken meat preservation

Gelatin/carrageenan (Ge/Car) active packaging films incorporated with turmeric essential oil (TEO) encapsulated in zein nanoparticles (ZNP) were developed. The efficacy of these active packaging films and their antimicrobial properties were also investigated to ensure their practical application. Three different types of nanocomposite films (Ge/Car, Ge/Car/TEO, and Ge/Car/ZNP) were prepared. The characterization of the films was elucidated using Fourier transform infrared (FTIR), X-ray diffraction analyses (XRD), and scanning electron microscope (SEM). Physicochemical and mechanical properties of the films were enhanced, owing to the application of TEO-containing nanocomposites. Supercritical-CO₂ extracted TEO showed excellent biological activities, alongside GC-MS analysis identified that TEO contained 33 bioactive compounds where the major constituent was Zingiberene. ZNP proved an excellent carrier of TEO. The nanocomposite film sustainably released TEO, improving the shelf life of the chicken meat by reducing bacterial colonies from 3.08 log CFU/g to 2.81 log CFU/g after 14 days incubation against Salmonella enterica compared with 6.66 log CFU/g observed in the control film. The overall results of this study suggest that the nanocomposite active film is an excellent candidate for food packaging to ensure a better world.

Preparation of hydroxyethyl cellulose/ mangiferin edible films and their antimicrobial properties

In this study, we have used hydroxyethyl cellulose (HEC) to prepare antimicrobial films for multipurpose applications. Using HEC gives mangiferin powder (M) mechanical properties, while mangiferin powder gives HEC antimicrobial activities. Various concentrations of M (2.5, 5 and 10% wt/vol) were added to HEC to enhance the antimicrobial ability of HEC/M films. The results showed that 10% (wt/vol) was the optimum concentration to accomplish the antimicrobial activity. Various analyses were performed to study the prepared films' physical, chemical, mechanical, and antimicrobial properties.

Synergistic cellulose-based nanocomposite packaging and cold plasma decontamination for extended saffron preservation

Sterilization of saffron packaging and maintaining the quality of saffron content are the main priorities in saffron preservation. Common modalities do not offer lasting saffron preservation and it is urgent to develop novel packaging approaches from renewable resources and prevent packaging waste. Here, simultaneous decontamination and quality maintenance of saffron is demonstrated, for the first time, through the synergistic application of nano-clay-loaded carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) nanocomposites (CNCs) and cold plasmas (CP). Compared to the separate uses of CP and CMC/PVA/nano clay, our results confirm the synergies between CP and CMC/PVA/nano clay cause complete inactivation of Escherichia coli bacteria, while not significantly affecting the concentrations of the essential saffron components (safranal, crocin, and picrocrocin). Overall, the CP-treated CMC/PVA/nano clay fosters saffron preservation, through contamination removal and quality maintenance of the food product. The synergistic application of CP and CMC/PVA/nano clay thus represents a promising strategy for packaging, sterilization, and preservation of high-value food products.

Production of Thermoplastic Starch-Aloe vera Gel Film with High Tensile Strength and Improved Water Solubility

Biodegradable film packaging made from thermoplastic starch (TPS) has low mechanical performance and high water solubility, which is incomparable with synthetic films. In this work, Aloe vera (AV) gel and plasticized soluble potato starch were utilised to improve the mechanical stability and water solubility of TPS. Dried starch was mixed with glycerol and different AV gel concentrations (0% to 50%). The TPS + 50% AV gel (30 g TPS + 15 g AV gel) showed the best improvement compared to TPS alone. When compared to similar TPS films with AV gel added, this film is stronger and dissolves better in water. Mechanical qualities improved the tensile strength and Young's modulus of the TPS film, with 1.03 MPa to 9.14 MPa and 51.92 MPa to 769.00 MPa, respectively. This was supported by the improvement of TPS water solubility from 57.44% to 46.6% and also by the increase in decomposition temperature of the TPS. This promises better heat resistance. The crystallinity percentage increase to 24.26% suggested that the formation of hydrogen bonding between TPS and AV gel enhanced crosslinking in the polymeric structure. By adding AV gel, the TPS polymeric structure is improved and can be used as a biodegradable food-packaging film.

Biodegradable Films Prepared from Pulp Lignocellulose Adhesives of Urea Formaldehyde Resin Modified by Biosulfonate

Traditional low-density polyethylene (LDPE) film causes environmental pollution; there is a pressing need to make new bio-based polymers for alternative products, to meet agricultural production needs and for sustainable ecological development. In this study, urea-formaldehyde resin (UF) was modified with polyvinyl alcohol (PVA) and 1-2.5% bio-based sulfonate (BBS). The influence of BBS inducing on the functional groups, microstructure, and thermal behavior was evaluated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). A biodegradable film was prepared with modified UF resin as adhesive and pulp lignocellulose as raw material. The biodegradable mulch film samples were tested for biodegradability, water retention, and cooling soil temperature characters using LDPE and no mulching (NM) as a control. The results showed that with the increase of BBS content, the viscosity and reactivity of modified PUF resin increased, and the free formaldehyde content decreased. A 2%BBS modified PUF resin (2.0BBS/PUF) accelerated the curing process of the PUF resin, formed a flexible macromolecular network structure, and enhanced the toughness of the resin. The biodegradable mulch prepared with PUF, BBS, and 2.0BBS/PUF as adhesives had good water retention. BBS modification increased the degradation rate of mulch by 17.53% compared to the PUF. Three biodegradable films compared with LDPE and NM significantly reduced the soil temperature under summer cucumber cultivation, and the 2.0BBS/PUF coating had the lowest diurnal temperature difference, which provided a suitable soil environment for crop growth.

Development of Aloe Vera-Green Banana Saba-Curcumin Composite Film for Colorimetric Detection of Ferrum (II)

This study was performed to develop and characterize a bio-film composed of Aloe vera (Aloe barbadensis), green banana Saba (Musa acuminata x balbisiana), and curcumin for the detection of Fe²⁺ ions. Cross-linking interaction between banana starch-aloe vera gel and banana starch-curcumin enhanced l the sensing performance of the composite film towards divalent metal ions of Fe²⁺. The morphological structure of the Aloe vera-banana starch-curcumin composite revealed a smooth and compact surface without cracks and some heterogeneity when observed under Scanning Electron Microscopy (SEM). The thickness, density, color property, opacity, biodegradation, moisture content, water-solubility, water absorption, swelling degree, and water vapor permeability of bio-films were measured. The incorporation of aloe vera gel and curcumin particles onto the banana starch film has successfully improved the film properties. The formation of the curcumin-ferrum (II) complex has triggered the film to transform color from yellow to greenish-brown after interaction with Fe²⁺ ions that exhibit an accuracy of 101.11% within a swift reaction time. Good linearity (R² = 0.9845) of response on colorimetric analysis was also obtained in Fe²⁺ ions concentration that ranges from 0 to 100 ppm, with a limit of detection and quantification found at 27.84 ppm and 92.81 ppm, respectively. In this context, the film was highly selective towards Fe²⁺ ions because no changes of color occur through naked eye observation when films interact with other metal ions, including Fe³⁺, Pb²⁺, Ni²⁺, Cd²⁺, and Cu^2+. Thus, these findings encourage curcumin-based starch films as sensing materials to detect Fe²⁺ ions in the field of food and agriculture.

Tunable mechanical behavior of collagen-based films: A comparison of celluloses in different geometries

Collagen (Col) films were reinforced by celluloses in different geometries: microcrystalline cellulose (MCC), cellulosic fines (CF), cellulose nanofiber (CNF) and cellulose nanocrystals (CNC). The reinforcement mechanisms were investigated by the elastoplasticity and fracture appearance. Compared with the fracture stress of collagen film (67.5 MPa), the Col-CNF films effectively borne the stress (95.8 MPa) by intercrystalline fracture, ascribing the abundant hydrogen bonding and mechanical locking between cellulose and collagen. The toughness of Col-CF films was increased by the interfibrillar slippage of CF and pull-off of CF within the matrix, improving the strain-to-break from 8.37% to 12.13%. The films added with MCC and CNC weaken the mechanical behavior, due to the defects and lack of mechanical locking. Besides, the effects of celluloses' geometries on the thickness, density, water-tightness, thermal stability, crystallinity and FTIR of films were also investigated. These provide the evidence that the geometries of fillers diversely improve the behaviors of collagen film offering strategies for the film with adjustable mechanical properties.

Development of alginate-based edible coatings of optimized UV-barrier properties by response surface methodology for food packaging applications

Despite the outstanding characteristics of alginate, it suffers from bad UV-barrier, water barrier, and antimicrobial properties limiting its wide usage in food packaging. For this concern, Box-Behnken design (BBD) was applied to prepare an alginate-based edible coating of the best optimized UV-shielding properties upon the incorporation of both Aloe vera (AV) and zinc oxide nanoparticles (ZnO-NPs). The optimized minimum UV-transmittance was 4.96% when the optimized compositions of alginate (1.05 g), AV (2.95 g), and ZnO-NPs (4.93 wt%) were used. FTIR was used to verify the successful edible coating preparation while the wide-angle X-ray diffraction (XRD) was used to identify the interactions between the film's components. The incorporation of both AV and ZnO-NPs significantly improved alginate's thermal, water vapor permeability (WVP), mechanical and antimicrobial properties. In addition, the films incorporated with both AV and ZnO-NPs exhibited excellent UV-barrier properties compared with neat alginate. The optimized alginate film incorporated with both ZnO-NPs and AV significantly extended the shelf-life of tomato fruits up to 16 days without any defects. Due to the outstanding physical, UV-shielding, and antimicrobial properties of the optimized alginate/AV/ZnO-NPs film, it could be used potentially in food packaging industries.

Fabrication and characterization of biodegradable active films with modified morphology based on polycaprolactone-polylactic acid-green tea extract

This research focused on developing an eco-friendly packaging for food products through blending polycaprolactone (PCL) and polylactic acid (PLA) as two biodegradable polymers, and green tea extract (GTE) as a natural antioxidant pushing the films toward active packaging; thereby, the morphological, mechanical, thermal, barrier, antioxidant, and biodegradation features of the composite films were analyzed. The films containing 30% PLA exhibited a reduction of 14.96%, 38.89%, 8.75%, and 35.55% in the hydrophilicity, water-solubility, water vapor permeability (WVP), and oxygen transition rate (OTR), respectively. Furthermore, GTE incorporation led to antioxidant behavior as well as better barrier properties (up to 6.25% decrease in WVP and 55.78% in OTR), mechanical properties (an increase of 14.96%, 38.89%, and 8.75% in elastic modulus, tensile strength, and elongation at break, respectively) and biodegradable rate (124.13%). Indeed, the presence of polyphenol compounds in green tea improved molecular interaction between the polymers and launched a co-continuous structure and an unparalleled level of compatibility, which was also approved by the changes in FTIR spectra of the PCL/PLA films. These results demonstrate the benefits of blending PLA with PCL and GTE integration in terms of operational enhancement and film activating, respectively, to provide reliable food packaging.

Development and evaluation of Moringa extract incorporated Chitosan/Guar gum/Poly (vinyl alcohol) active films for food packaging applications

The present study contributes the synthesis of active films with the incorporation of moringa extract (ME) into chitosan (CS)/guar gum (GG)/poly(vinyl alcohol) (PVA) matrix (CGPM) by simple solvent casting technique. The effect of ME on the mechanical, thermal, structural and morphological properties of CGPM active films were investigated. ME has shown a marked influence on the optical, thermal properties and swelling behaviour of CGPM active films. The improvement in the tensile strength of CGPM-1 active film (53.7 MPa) was observed compared to control CS/GG/PVA (CGP) film. DSC study revealed that glass transition temperature (Tg) and melting temperature (Tm) decreased with the addition of ME in the CGP matrix, which confirmed the miscibility among the components of active films. There was an improvement in the thermal stability of the CGPM active films. The FTIR study confirmed the molecular interaction between ME and CS/GG/PVA matrix. The XRD analysis showed a decrease in crystallinity with an increase in the ratio of CS for CGPM active films. The CGPM active films were an excellent barrier to UV- light and have exhibited a decrease in moisture adsorption and water solubility compared to CGP control film. The inclusion of ME in the CGP matrix leads to the formation of a dense compact surface, which in turn enhanced hydrophobicity of active films. The CGPM active films showed minimum WVP, OP values and overall migration values were within the limits of 10 mg/dm2. It was also observed that CGPM active films effectively inhibited the growth of E. coli and S. aureus bacteria. These findings suggest CGPM active films are biodegradable, biocompatible, non-toxic and hence can find application as food packaging materials.

Assessment of Toxicity and Biodegradability of Poly(vinyl alcohol)-Based Materials in Marine Water

Due to the continuous rise in conventional plastic production and the deficient management of plastic waste, industry is developing alternative plastic products made of biodegradable or biobased polymers. The challenge nowadays is to create a new product that combines the advantages of conventional plastics with environmentally friendly properties. This study focuses on the assessment of the potential impact that polyvinyl alcohol (PVA)-based polymers may have once they are released into the marine environment, in terms of biodegradation in seawater (assessed by the percentage of the Theoretical Oxygen Demand, or % ThOD, of each compound) and aquatic toxicity, according to the standard toxicity test using Paracentrotus lividus larvae. We have tested three different materials: two glycerol-containing PVA based ones, and another made from pure PVA. Biodegradation of PVA under marine conditions without an acclimated inoculum seems to be negligible, and it slightly improves when the polymer is combined with glycerol, with a 5.3 and 8.4% ThOD achieved after a period of 28 days. Toxicity of pure PVA was also negligible (<1 toxic units, TU), but slightly increases when the material included glycerol (2.2 and 2.3 TU). These results may contribute to a better assessment of the behavior of PVA-based polymers in marine environments. Given the low biodegradation rates obtained for the tested compounds, PVA polymers still require further study in order to develop materials that are truly degradable in real marine scenarios.

Recent Advances in Biotechnological Itaconic Acid Production, and Application for a Sustainable Approach

Intense research has been conducted to produce environmentally friendly biopolymers obtained from renewable feedstock to substitute fossil-based materials. This is an essential aspect for implementing the circular bioeconomy strategy, expressly declared by the European Commission in 2018 in terms of "repair, reuse, and recycling". Competent carbon-neutral alternatives are renewable biomass waste for chemical element production, with proficient recyclability properties. Itaconic acid (IA) is a valuable platform chemical integrated into the first 12 building block compounds the achievement of which is feasible from renewable biomass or bio-wastes (agricultural, food by-products, or municipal organic waste) in conformity with the US Department of Energy. IA is primarily obtained through fermentation with Aspergillus terreus, but nowadays several microorganisms are genetically engineered to produce this organic acid in high quantities and on different substrates. Given its trifunctional structure, IA allows the synthesis of various novel biopolymers, such as drug carriers, intelligent food packaging, antimicrobial biopolymers, hydrogels in water treatment and analysis, and superabsorbent polymers binding agents. In addition, IA shows antimicrobial, anti-inflammatory, and antitumor activity. Moreover, this biopolymer retains qualities like environmental effectiveness, biocompatibility, and sustainability. This manuscript aims to address the production of IA from renewable sources to create a sustainable circular economy in the future. Moreover, being an essential monomer in polymer synthesis it possesses a continuous provocation in the biopolymer chemistry domain and technologies, as defined in the present review.

Preparation and properties of poly (vinyl alcohol)/sodium caseinate blend films crosslinked with glutaraldehyde and glyoxal

Bio-based films containing poly (vinyl alcohol)/casein have poor mechanical and water vapor barrier properties that limit their use in packaging application. Some properties such as water resistance and tensile strength can be increased by the cross-linking process. For this reason, poly(vinyl alcohol)/sodium caseinate (PVA/SC) blends were crosslinked by adding glutaraldehyde (GLA) and glyoxal (GL) at different ratios in this work. The films were prepared by solution casting technique. Fourier transform infrared analysis (FTIR) confirmed the crosslinking reaction between the components. As a result of the crosslinking, the thicknesses, water vapor barrier properties and water contact angle values of the films have increased. The total soluble matters (TSM) of PVA/SC film decreased with increasing amounts of crosslinkers and GLA crosslinked films exhibited lower TSM. The addition of GLA and GL resulted in more strengthened films as verified by the tensile test. On the other hand, GLA crosslinked films were more flexible than un-crosslinked and GL crosslinked PVA/SC films. The hydrophilic PVA/SC film became more hydrophobic with the increasing amounts of crosslinkers. With the crosslinking, the PVA/SC film became more thermally stable. In conclusion, the crosslinked PVA/SC films were obtained with suitable properties for packaging applications.

Colorimetric films based on pectin/sodium alginate/xanthan gum incorporated with raspberry pomace extract for monitoring protein-rich food freshness

Raspberry pomace extracts (RPE) with different concentrations (0.5 g/L, 1.5 g/L and 3 g/L) were incorporated into pectin/sodium alginate/xanthan gum composite film (PAX) to prepare colorimetric raspberry films (PAXR₅, PAXR₁₅ and PAXR₃₀). Fourier Transform Infrared and Scanning Electron Microscopy analysis showed RPE had good compatibility with PAX. Compared to PAX, the raspberry films had lower water vapor permeability and water swelling ratio, higher tensile strength, opacity and antioxidant capacity. The films presented a smoother surface and denser structure than PAX. Furthermore, PAXR₁₅ had an excellent discoloration at pH 1-13, especially at pH 5-10, the color changes of PAXR₁₅ from pink-red-brown-blue-dark green distinguished by the naked eyes. Therefore, it has the potential to become a pH-sensitive film used in monitoring protein-rich food freshness.

Fabrication of super-high transparent cellulose films with multifunctional performances via postmodification strategy

A transparent versatile cellulose platform film was prepared from Eucalyptus pulp in this work. Based on such cellulose platform, multifunctional cellulose films with ultraviolet-shielding, photochromism, and strong mechanical strength were fabricated via nucleophilic postmodification strategy by introducing a versatile spiropyran moiety into cellulose molecules. The fabricated cellulose films exhibited super-high transmittance up to 96% and performed notable ultraviolet-shielding capacity at 200-400 nm. Moreover, the photochromic performance of cellulose films with color changes could be clearly observed by the naked eyes, and the fluorescent blue could be excited. Besides, the tensile stress of multi-functional cellulose film was about 80 MPa, which was almost 8 times stronger than that of the commercial polyethylene film at the same thickness. It is noteworthy that these superior performances promote such a cellulose platform to be a versatile precursor for fabricating various multi-functional cellulose used in the fields of out-door coating, transparent packaging, optical screen,etc.

Evaluation of bioactive release kinetics from crosslinked chitosan films with Aloe vera

Thermocompression was employed to prepare citric acid-crosslinked chitosan films with Aloe vera (AV) as bioactive compound. Films were easy to handle and mechanical properties did not change with the addition of AV up to 10 wt%, although both TS and EAB decreased for the films with 15 wt% AV, indicating that high AV contents would hinder intermolecular interactions among the formulation components. Maillard reaction occurred between chitosan and citric acid at the processing temperature used (115 °C), while physical interactions took place with AV, as shown by FTIR analysis. All films were insoluble but displayed hydration and limited swelling due to both physical and chemical interactions promoted by AV and citric acid, respectively. A slow AV release, governed by a Fickian diffusion controlled mechanism, and an increase of surface hydrophilicity, which favors cell adhesion, were observed.

High-Amylose Corn Starch/Konjac Glucomannan Composite Film: Reinforced by Incorporating β-Cyclodextrin

Glycerol-plasticized high-amylose corn starch/konjac glucomannan (HCS/KGM) composite films incorporated with various concentrations of β-cyclodextrin (β-CD) were prepared and investigated for structural, mechanical, and physical properties. The results of X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, thermogravimetric analyses, and scanning electron microscopy indicated that β-CD excluded from the polymer chains and aggregated to form crystals during film formation, which drove HCS to interact with KGM more compactly. The thickness and transparency of the films increased after β-CD was incorporated. More associations of HCS/KGM enhanced the mechanical properties and reduced the moisture content of the films. The water vapor permeability of the HCS/KGM composite film was also improved significantly with the incorporation of β-CD. The enhanced association between biopolymers in the presence of β-CD will advance the development of a degradable active composite packaging film.

Progresses in Food Packaging, Food Quality, and Safety-Controlled-Release Antioxidant and/or Antimicrobial Packaging

Food packaging is designed to protect foods, to provide required information about the food, and to make food handling convenient for distribution to consumers. Packaging has a crucial role in the process of food quality, safety, and shelf-life extension. Possible interactions between food and packaging are important in what is concerning food quality and safety. This review tries to offer a picture of the most important types of active packaging emphasizing the controlled/target release antimicrobial and/or antioxidant packaging including system design, different methods of polymer matrix modification, and processing. The testing methods for the appreciation of the performance of active food packaging, as well as mechanisms and kinetics implied in active compounds release, are summarized. During the last years, many fast advancements in packaging technology appeared, including intelligent or smart packaging (IOSP), (i.e., time-temperature indicators (TTIs), gas indicators, radiofrequency identification (RFID), and others). Legislation is also discussed.

Hydroxy citric acid cross-linked chitosan/guar gum/poly(vinyl alcohol) active films for food packaging applications

The present work aims to prepare Chitosan (CS)/Guar gum (GG)/Poly(vinyl alcohol) (PVA) cross-linked with Hydroxy citric acid (HCA) (CGPH active film) by solvent casting technique. The influence of HCA on different CS/PVA ratio (1:3, 1:1, 3:1) in presence of the fixed amount of GG (0.2%) was investigated. The analysis of the results showed that the addition of HCA to the different ratio of CS/PVA increased the degradation temperature and improved the mechanical properties of CGPH active films. FTIR spectra and XRD analysis revealed strong interactions among the components of CGPH active films. The analysis of SEM images and water contact angle suggested a compact, dense film surface with hydrophobic nature. Further, all the active films have shown a decrease in water vapour permeability (WVP) and acted as a barrier to UV-light. CGPH active films effectively inhibited the growth of S. aureus and E. coli bacteria. With all these features the CGPH active films can find application in food packaging.

Optimization of bleaching process for cellulose extraction from apple and kale pomace and evaluation of their potentials as film forming materials

Celluloses from apple and kale pomaces were extracted through sequentially chemical treatments, characterized, and evaluated for the film forming property. Since bleaching step is critical to cellulose quality, bleaching conditions including concentration of bleaching agent (NaClO) (0.5-3 %), temperature (60-80 °C) and time (1-2 h) were optimized. NaClO concentration and temperature exhibited significant impact on the quality of celluloses. Excessive bleaching conditions caused severe oxidation of celluloses and significantly reduced their dimension. The optimum bleaching conditions for apple pomace were identified as 1-1.5 % NaClO at 80 °C for 1 h, resulting in cellulose yield of 7.9 %, water retention value of 2.96, and whiteness index of 72.36. Morphological analysis of optimum apple pomace-celluloses revealed their long-shaped structure with 500-750 μm in length and 20-25 μm in width. The prepared cellulose films had high transparency and good mechanical strength. This study provided new insight in converting fruit processing byproducts into high quality celluloses.