The functionalized ionic liquid-stabilized palladium nanoparticles catalyzed selective hydrogenation in ionic liquid

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Thermoregulated Ionic Liquid-Stabilizing Ru/CoO Nanocomposites for Catalytic Hydrogenation

Catalytic hydrogenations represent fundamental processes and allow for atom-efficient and clean functional group transformations for the production of chemical intermediates and fine chemicals in chemical industry. Herein, the Ru/CoO nanocomposites have been constructed and applied as nanocatalysts for the hydrogenation of phenols and furfurals into the corresponding cyclohexanols and tetrahydrofurfuryl alcohols, respectively. The functionalized ionic liquid acted not only as a ligand for stabilizing the Ru/CoO nanocatalyst but also as a thermoregulated agent. The as-obtained nanocatalyst showed superior activity, and it could be conveniently recovered via the thermoregulating phase separation. In six recycle experiments, the catalysts maintained excellent performance. It was observed that the catalytic performance highly hinged on the molar ratio of Ru to Co in the nanocatalyst. The catalyst characterization was carried out by high-resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray photoelectron spectroscopy, X-ray diffraction, high-resolution mass spectrometry, Fourier transform infrared, nuclear magnetic resonance, and UV-vis. Especially, the characterization by HRTEM and HAADF-STEM images of the nanocatalyst demonstrated that Ru(0) and Co(II) species were distributed uniformly and the Ru and Co(II) species were close to each other. However, Co(0) was generated and an electronic transfer from Co to Ru species could occur under the hydrogenation conditions. The ¹³C NMR characterization indicated further that Co(II) sites were mainly responsible for phenol adsorption. Meanwhile, the adjacent electron-rich Ru(0) sites can promote H₂ dissociation and favor for the sequential hydrogenation.

Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis

Ionic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in the Part 1 of this review paper. Part 2 of the paper gives a comprehensive overview of recent experimental studies dealing with application of ionic liquids for preparation of metal and semiconductor based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids is presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting and ray-mediated methods (microwave, ultrasound, UV-radiation and γ-radiation). It was found that ionic liquids formed of a 1-butyl-3-methylimidazolium [BMIM] combined with tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethanesulfonyl)imide [Tf2N] are the most often used ILs in the synthesis of nano- and microparticles, due to their low melting temperature, low viscosity and good transportation properties. Nevertheless, examples of other IL classes with intrinsic nanoparticles stabilizing abilities such as phosphonium and ammonium derivatives are also presented. Experimental data revealed that structure of ILs (both anion and cation type) affects the size and shape of formed metal particles, and in some cases may even determine possibility of particles formation. The nature of the metal precursor determines its affinity to polar or nonpolar domains of ionic liquid, and therefore, the size of the nanoparticles depends on the size of these regions. Ability of ionic liquids to form varied extended interactions with particle precursor as well as other compounds presented in the reaction media (water, organic solvents etc.) provides nano- and microstructures with different morphologies (0D nanoparticles, 1D nanowires, rods, 2D layers, sheets, and 3D features of molecules). ILs interact efficiently with microwave irradiation, thus even small amount of IL can be employed to increase the dielectric constant of nonpolar solvents used in the synthesis. Thus, combining the advantages of ionic liquids and ray-mediated methods resulted in the development of new ionic liquid-assisted synthesis routes. One of the recently proposed approaches of semiconductor particles preparation is based on the adsorption of semiconductor precursor molecules at the surface of micelles built of ionic liquid molecules playing a role of a soft template for growing microparticles.

Efficient palladium and ruthenium nanocatalysts stabilized by phosphine functionalized ionic liquid for selective hydrogenation

Palladium and ruthenium nanoparticles stabilized by novel phosphine functionalized ionic liquid are originally utilized as efficient catalysts for excellent chemoselective hydrogenation.

Preparation of catalytic materials using ionic liquids as the media and functional components

Ionic liquids (ILs) have attracted much attention due to their unique properties and wide application potential in a variety of fields. The unusual properties of ILs provide numerous opportunities to design and prepare arious advanced materials, including highly efficient catalysts. In recent years, synthesis of different kinds of catalytic materials and their applications in chemical reactions have been studied extensively and have become a very interesting area. Herein, we present a review on the synthesis of catalytic materials using ILs as the media and/or functional components; the important and widely investigated topics are discussed, including mainly metal nanocatalysts/IL, functional IL/support, metals or metal oxides/IL/support, polymeric ILs (PILs) catalysts, and the performances of catalytic systems are highlighted. An outlook for this interesting area is also given at the end of the article.

Nanometallic chemistry: deciphering nanoparticle catalysis from the perspective of organometallic chemistry and homogeneous catalysis

Nanoparticle (NP) catalysis is traditionally viewed as a sub-section of heterogeneous catalysis. However, certain properties of NP catalysts, especially NPs dispersed in solvents, indicate that there could be benefits from viewing them from the perspective of homogeneous catalysis. By applying the fundamental approaches and concepts routinely used in homogeneous catalysis to NP catalysts it should be possible to rationally design new nanocatalysts with superior properties to those currently in use.

Amphiphilic ionic liquid stabilizing palladium nanoparticles for highly efficient catalytic hydrogenation

The highly water-soluble palladium nanoparticles (NPs) were synthesized by using the amphiphilic poly(ethylene glycol)-functionalized dicationic imidazolium-based ionic liquid (C(12)Im-PEG IL) as a stabilizing agent. The aqueous dispersed palladium NPs in the range of 1.9 ± 0.3 nm were observed by transmission electron microscopy (TEM). The physicochemical properties of C(12)Im-PEG IL in aqueous phase have been characterized by electrical conductivity, surface tension and dynamic light scattering (DLS) measurements. It was demonstrated that the amphiphilic ionic liquid can form micelles above its critical micelle concentration (CMC) in aqueous solution and the micelles played a crucial role in stabilizing the palladium NPs and thus promoted catalytic hydrogenation. Furthermore, the dicationic ionic liquid can also act as a gemini surfactant and generated emulsion between hydrophobic substrates and the catalytic aqueous phase during the reaction. The aqueous dispersed palladium NPs showed efficient activity for the catalytic hydrogenation of various substrates under very mild conditions and the stabilizing Pd(0) nanoparticles (NPs) can be reused at least eight times with complete conservation of activity.