Visible light-activated N-F-codoped TiO2 nanoparticles for the photocatalytic degradation of microcystin-LR in water

Molecular Engineering for UV-Vis to NIR Absorption/Emission Bands of Pyrazine-based A-π-D- π-A Switches to Design TiO2 Tuned Dyes: DFT Insights

This study investigates the tuning of the UV-Vis/NIR absorption bands of pyrazine-based A-D-A switches for designing efficient UV retardancy over TiO2 surfaces. The electronic properties and optical characteristics of seven dyes (DP1-DP7) were analyzed using computational methods. The results indicate that the dyes possessed distinct UV-Vis/NIR absorption properties. Their absorption wavelengths ranged from 389 to 477 nm, with corresponding energies ranging from 2.59 to 3.19 eV. The major contributions to the absorption were found to be the HOMO-LUMO transitions, varying from 86 to 96%. The dyes exhibited different donor (D) and acceptor (A) groups, influencing their electronic properties and absorption characteristics. The tunable electronic and optical properties of these dyes make them promising candidates for applications requiring UV protection for TiO2-based materials. The results contribute to understand the structure-property relationships in the design of UV-Vis/NIR absorbers and provide a foundation for further experimental investigations in the field of UV retardancy.

Comprehensive strategies for microcystin degradation: A review of the physical, chemical, and biological methods and genetic engineering

Addressing the threat of harmful cyanobacterial blooms (CyanoHABs) and their associated microcystins (MCs) is crucial for global drinking water safety. In this review, we comprehensively analyze and compares the physical, chemical, and biological methods and genetic engineering for MCs degradation in aquatic environments. Physical methods, such as UV treatments and photocatalytic reactions, have a high efficiency in breaking down MCs, with the potential for further enhancement in performance and reduction of hazardous byproducts. Chemical treatments using chlorine dioxide and potassium permanganate can reduce MC levels but require careful dosage management to avoid toxic by-products and protect aquatic ecosystems. Biological methods, including microbial degradation and phytoremediation techniques, show promise for the biodegradation of MCs, offering reduced environmental impact and increased sustainability. Genetic engineering, such as immobilization of microcystinase A (MlrA) in Escherichia coli and its expression in Synechocystis sp., has proven effective in decomposing MCs such as MC-LR. However, challenges related to specific environmental conditions such as temperature variations, pH levels, presence of other contaminants, nutrient availability, oxygen levels, and light exposure, as well as scalability of biological systems, necessitate further exploration. We provide a comprehensive evaluation of MCs degradation techniques, delving into their practicality, assessing the environmental impacts, and scrutinizing their efficiency to offer crucial insights into the multifaceted nature of these methods in various environmental contexts. The integration of various methodologies to enhance degradation efficiency is vital in the field of water safety, underscoring the need for ongoing innovation.

Comparison of As removal efficiency and health risks from aqueous solution using as-synthesized Fe0 and Cu0: modelling, kinetics and reusability

Batch scale removal of arsenic (As) from aqueous media was explored using nano-zero valent iron (Fe0) and copper (Cu0) particles. The synthesized particles were characterized using a Brunauer-Emmett-Teller (BET) surface area analyzer, a scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). The BET result showed that the surface area (31.5 m2/g) and pore volume (0.0415 cm3/g) of synthesized Fe0 were higher than the surface area (17.56 m2/g) and pore volume (0.0287 cm3/g) of Cu0. The SEM results showed that the morphology of the Fe0 and Cu0 was flowery microspheres and highly agglomerated with thin flakes. The FTIR spectra for Fe0 showed broad and intense peaks as compared to Cu0. The effects of the adsorbent dose (1-4 g/L), initial concentration of As (2 mg/L to 10 mg/L) and solution pH (2-12) were evaluated on the removal of As. Results revealed that effective removal of As was obtained at pH 4 with Fe0 (94.95%) and Cu0 (74.86%). When the dosage increased from 1 to 4 g L-1, the As removal increased from 70.59 to 93.02% with Fe0 and from 67 to 70.59% with Cu0. However, increasing the initial As concentration decreased the As removal significantly. Health risk indices, including estimated daily intake (EDI), hazard quotient (HQ), and cancer risk (CR) were employed and a significant decline (up to 99%) in risk indices was observed in As-treated water using Fe0/Cu0. Among the adsorption isotherm models, the values of R2 showed that isothermal As adsorption by Fe0 and Cu0 was well explained by the Freundlich adsorption isotherm model (R2 > 0.98) while the kinetic experimental data was well-fitted with the Pseudo second order model. The Fe0 showed excellent stability and reusability over five sorption cycles, and it was concluded that, compared to the Cu0, the Fe0 could be a promising technology for remediating As-contaminated groundwater.

Strategies for enhancing performance of perovskite bismuth ferrite photocatalysts (BiFeO3): A comprehensive review

Organic pollutants pose a significant threat to water safety, and their degradation is of paramount importance. Photocatalytic technology has emerged as a promising approach for environmental remediation, and Bismuth ferrite (BiFeO3) has been shown to exhibit remarkable potential for photocatalytic degradation of water pollutants, with its excellent crystal structure properties and visible light photocatalytic activity. This review presents an overview of the crystal properties and photocatalytic mechanism of perovskite bismuth ferrite (BiFeO3), as well as a summary of various strategies for enhancing its efficiency in photocatalytic degradation of organic pollutants. These strategies include pure phase preparation, microscopic modulation, composite modification of BiFeO3, and the integration of Fenton-like reactions and external field-assisted methods to improve its photocatalytic performance. The review emphasizes the impact of each strategy on photocatalytic enhancement. By providing comprehensive strategies for improving the efficiency of BiFeO3 photocatalysis, this review inspires new insights for efficient degradation of organic pollutants using BiFeO3 photocatalysis and contributes to the development of photocatalysis in environmental remediation.

A novel full solar light spectrum responsive antimicrobial agent of WS2 quantum dots for photocatalytic wound healing therapy

Photocatalytic antimicrobial therapy (PCAT) is considered to be a potential therapeutic treatment for bacterial-infection diseases. However, the antibacterial efficiency is unsatisfactory due to the limited application scope of photocatalysis. In this work, full-spectrum responsive tungsten disulfide quantum dots (WS₂ QDs) are prepared for killing bacteria and enabling wound healing through photocatalytic reactive oxygen species (ROS) generation and glutathione (GSH) depletion. On the one hand, these ultrasmall WS₂ QDs exhibit an excellent full spectrum (UV-Vis-NIR)-responsive photocatalytic effect by hindering the recombination of electron-hole pairs, thereby achieving the full use of the energy spectrum. Furthermore, the full-spectrum photocatalytic property of the as-prepared WS₂ QDs can be effectively strengthened by redox reaction to deplete GSH for accelerated wound healing. In a word, the as-prepared nanoplatform exhibits the ability to act as an admirable antibacterial reagent with full-spectrum catalytic performance for photocatalytic wound healing therapy. Therefore, this work will not only provide an effective full-spectrum photocatalytic reagent for anti-bacteria therapy and wound healing, but also provide a rational idea for the development of other novel antibacterial agents for applications in the biomedical field.

Photocatalytic Degradation of 4,4'-Isopropylidenebis(2,6-dibromophenol) on Sulfur-Doped Nano TiO2

In present work, we examine the photocatalytic properties of S-doped TiO₂ (S1, S2) compared to bare TiO₂ (S0) in present work. The photocatalytic tests were performed in alkaline aqueous solutions (pH = 10) of three differently substituted phenols (phenol (I), 4,4′-isopropylidenebisphenol (II), and 4,4′-isopropylidenebis(2,6-dibromophenol) (III)). The activity of the catalysts was evaluated by monitoring I, II, III degradation in the reaction mixture. The physicochemical properties (particle size, ζ-potential, E_bg, Eu, E⁰_cb, E⁰_vb, σ_o, K_L) of the catalysts were established, and we demonstrated their influence on degradation reaction kinetics. Substrate degradation rates are consistent with first-order kinetics. The apparent conversion constants of the tested compounds (k_app) in all cases reveal the sulfur-loaded catalyst S2 to show the best photocatalytic activity (for compound I and II S1 and S2 are similarly effective). The different efficiency of photocatalytic degradation I, II and III can be explained by the interactions between the catalyst and the substrate solution. The presence of bromine substituents in the benzene ring additionally allows reduction reactions. The yield of bromide ion release in the degradation reaction III corresponds to the Langmuir constant. The mixed oxidation-reduction degradation mechanism results in higher degradation efficiency. In general, the presence of sulfur atoms in the catalyst network improves the degradation efficiency, but too much sulfur is not desired for the reduction pathway.

In situ generation of Ni/Fe hydroxide layers by anodic etching of a Ni/Fe film for efficient oxygen evolution reaction

A Ni/Fe hydroxide electrocatalyst was fabricated via a simple and easily controlled method by combining anodic fluoridation and cyclic voltammetry (CV) treatment as an efficient catalyst for the OER.

Engineering of graphitic carbon nitride with simultaneous potassium doping sites and nitrogen defects for notably enhanced photocatalytic oxidation performance

Graphitic carbon nitride (g-C₃N₄) offers exciting opportunities for sustainable photocatalytic oxidation of organic pollutants but suffers from drawbacks of insufficient oxidation driving force and low quantum efficiency. To over the drawbacks, here a simple and effective strategy was developed to engineer g-C₃N₄ with simultaneous interstitially embedded potassium dopant and nitrogen defects, and the process included supramolecular preorganization followed by KOH-assisted thermal polycondensation. In the prepared D_N-K-CN catalysts, potassium doping level and the amount of nitrogen defects were both controllable. With the increment of potassium doping level, the bandgap of the D_N-K-CN became narrow, along with continuously downshifted valence band position. The D_N-K-CN showed greatly enhanced visible-light photocatalytic oxidation performance with respect to g-C₃N₄ in the degradation of emerging phenolic pollutants, acetaminophen and methylparaben; meanwhile, the oxidation performance of D_N-K-CN depended on potassium doping level and the amount of nitrogen defects. Combination of experimental findings and theory calculations it is confirmed that the enhanced photocatalytic oxidation performance of D_N-K-CN was attributed to the synergistic effect of potassium dopant and nitrogen defects, which resulted in the generation of plentiful active oxygen species and the improvement of oxidation driving force of valence holes. The influence of potassium dopant and nitrogen defects on the electronic and band structures of g-C₃N₄ was revealed; simultaneously, mechanism of the enhanced photocatalytic oxidation performance of g-C₃N₄ after the introduction of potassium dopant and nitrogen defects was studied. The present work provided new insights into the electronic and band structure tuning for the improvement of the photocatalytic oxidation performance of g-C₃N₄.

TiO2@MOF Photocatalyst for the Synergetic Oxidation of Microcystin-LR and Reduction of Cr(VI) in Aqueous Media

The coexistence of pollutants presents a great challenge to the implementation of photocatalysts. In this work, a novel MIL-101(Fe)/TiO2 composite prepared by in situ growth of MIL-101(Fe) on TiO2 was developed for the synergetic oxidation of MC-LR and Cr(VI) reduction. The heterojunction material shows elevated photocatalytic behavior under ultraviolet compared with the unary pollutant system. Furthermore, quenching experiments and electron spin resonance confirm that the enhanced photodegradation behavior is related to the synergistic effect between the photocatalytic reduction and oxidation process, in which MC-LR consumes the holes and Cr(VI) captures electrons, followed by efficient charge separation through the conventional double-transfer mechanism between MIL-101(Fe) and TiO2. This investigation provides a deeper understanding of the construction of MOFs/semiconductor heterojunctions for the pollutants removal in multi-component contaminants system.

A novel ternary heterogeneous TiO2/BiVO4/NaY-Zeolite nanocomposite for photocatalytic degradation of microcystin-leucine arginine (MC-LR) under visible light

Microcystin-leucine arginine (MC-LR) is a carcinogenic toxin, produced by cyanobacteria. The release of this toxin into drinking water sources can threaten public health and environmental safety. Therefore, effective MC-LR removal from water resources is necessary. In the present study, the hydrothermal method was used to synthesize a novel ternary BiVO₄/TiO₂/NaY-Zeolite (B/T/N-Z) nanocomposite for MC-LR degradation under visible light. FESEM, FTIR, XRD, and DRS were performed for characterizing the nanocomposite structure. Also, the Response Surface Methodology (RSM) was applied to determine the impact of catalyst dosage, pH, and contact time on the MC-LR removal. High-performance liquid chromatography was performed to measure the MC-LR concentration. Based on the results, independent parameters, including contact time, catalyst dosage, and pH, significantly affected the MC-LR removal (P < 0.05). In other words, increasing the contact time, catalyst dosage, and acidic pH had positive effects on MC-LR removal. Among these variables, the catalyst dosage, with the mean square and F-value of 1041.37 and 162.84, respectively, had the greatest effect on the MC-LR removal efficiency. Apart from the interaction between the catalyst dosage and contact time, the interaction effects of other parameters were not significant. Also, the maximum MC-LR removal efficiency was 99.88% under optimal conditions (contact time = 120 min, catalyst dosage = 1 g/L, and pH = 5). According to the results, the B/T/N-Z nanocomposite, as a novel and effective photocatalyst could be used to degrade MC-LR from polluted water.

Photocatalytic degradation of microcystin-LR by modified TiO2 photocatalysis: A review

Microcystin-LR (MC-LR), the most toxic and commonly encountered cyanotoxin, is produced by harmful cyanobacterial blooms and potentially threatens human and ecosystems health. Titanium dioxide (TiO₂) photocatalysis is attracting growing attention and has been considered as an efficient, environmentally friendly and promising solution to eliminate MC-LR in the aquatic ecosystems. Over recent decades, scientific efforts have been directed towards the understanding of fundamentals, modification strategies, and application potentials of TiO₂ photocatalysis in degrading MC-LR. In this article, recent reports have been reviewed and progress has been summarized in the development of heterogeneous TiO₂-based photocatalysts for MC-LR photodegradation under visible, UV, or solar light. The proposed photocatalytic principles of TiO₂ and destruction of MC-LR have been thoroughly discussed. Specifically, some main modification methods for improving the drawbacks and performance of TiO₂ nanoparticle were highlighted, including element doping, semiconductor coupling, immobilization, floatability amelioration and magnetic separation. Moreover, the performance evaluation metrics quantum yield (QY) and figure of merit (FOM) were used to compare different photocatalysts in MC-LR degradation. The best performance was seen in N-TiO₂ with QY and FOM values of 2.20E-07 molecules/photon and 1.00E-11 mol·L/(g·J·h). N-TiO₂ or N-TiO₂-based materials may be excellent options for photocatalyst design in terms of MC-LR degradation. Finally, a summary of the remaining challenges and perspectives on new tendencies in this exciting frontier and still an emerging area of research were addressed accordingly. Overall, the present review will offer a deep insight for understanding the photodegradation of MC-LR with modified TiO₂ to further inspire researchers that work in associated fields.

Clay-supported anisotropic Au-modified N,S-doped TiO2 nanoparticles for enhanced photocatalytic dye degradation and esterification reactions

Kaolinite clay supported doped TiO₂ and anisotropic gold deposited visible light induced plasmonic nanocatalysts for dye degradation and esterification reactions.

Photocatalysis as a Tool for in Vitro Drug Metabolism Simulation: Multivariate Comparison of Twelve Metal Oxides on a Set of Twenty Model Drugs

The constant development in the area of medicinal substances on the market and their subsequent progress in the field of drug analysis has become one of the reasons for the search for alternative, cheaper, and faster methods to determine the metabolism pathways of new molecular entities (NMEs). The simulation of transformation processes using photocatalysis is considered to be one of the promising methods. Although its effectiveness has been proven, the research has so far focused especially on titanium dioxide, while a more accurate comparison of the suitability of different photocatalysts in terms of their use in drug metabolism studies has not been performed. For this purpose, a set of twelve metal oxides was prepared and their photocatalytic efficiency in the direction of drug metabolism mimicking was checked on a model mixture of twenty medicinal substances differing both in chemical structure and pharmacological properties. Incubation with human liver microsomes (HLMs) was used as the reference method. The metabolic profiles obtained with the use of LC-MS analysis were compared using multidimensional chemometric techniques; and the graphic presentation of the results in the form of PCA plot and cluster dendrogram enabled their detailed interpretation and discussion. All tested photocatalysts confirmed their effectiveness. However, the exact outcome of the study indicate advantage of the WO3-assisted photocatalysis over other metal oxides.

Copper and cerium co-doped cobalt ferrite nanoparticles: structural, morphological, optical, magnetic, and photocatalytic properties

A rapid synthetic technique is investigated for magnetic nanoparticles (Co_1-yCu_yFe_2-xCe_xO₄ (x = 0, y = 0), (x = 0.05, y = 0), (x = 0, y = 0.5), and (x = 0.05, y = 0.5)). The structure, morphology, optical and magnetic performance of prepared nanoparticles are analyzed by powder XRD, XPS, FT-IR, SEM-EDAX, TEM, DRS, and VSM. The photocatalytic activity of the synthesized nanoparticles for the removal of the Congo red (CR) dye and bisphenol A (BPA) from aqueous solution is examined by UV-visible spectrometer. Research indicates that the co-doping of Cu²⁺ and Ce³⁺ showed marked effect on the structural, optical, magnetic, and photocatalytic properties of the CoFe₂O₄ nanoparticles. DRS showed that the Co_0.5Cu_0.5Fe_1.95Ce_0.05O₄ nanoparticles have lower band gap energy (0.78 eV) than other synthesized compounds. High removal percentage of CR and BPA (99.09% and 99.33%) was observed within 30 min and 180 min under visible and UV-light illumination respectively using Co_0.5Cu_0.5Fe_1.95Ce_0.05O₄. The corresponding photocatalytic degradation kinetics and mechanism are analyzed.

Noble metal-coated MoS2 nanofilms with vertically-aligned 2D layers for visible light-driven photocatalytic degradation of emerging water contaminants

Two-dimensional molybdenum disulfide (2D MoS2) presents extraordinary optical, electrical, and chemical properties which are highly tunable by engineering the orientation of constituent 2D layers. 2D MoS2 films with vertically-aligned layers exhibit numerous 2D edge sites which are predicted to offer superior chemical reactivity owing to their enriched dangling bonds. This enhanced chemical reactivity coupled with their tunable band gap energy can render the vertical 2D MoS2 unique opportunities for environmental applications that go beyond the conventional applications of horizontal 2D MoS2 in electronics/opto-electronics. Herein, we report that MoS2 films with vertically-aligned 2D layers exhibit excellent visible light responsive photocatalytic activities for efficiently degrading organic compounds in contaminated water such as harmful algal blooms. We demonstrate the visible light-driven rapid degradation of microcystin-LR, one of the most toxic compounds produced by the algal blooms, and reveal that the degradation efficiency can be significantly improved by incorporating noble metals. This study suggests a high promise of these emerging 2D materials for water treatment, significantly broadening their versatility for a wide range of energy and environmental applications.

Magnetically separable sulfur-doped SnFe2O4/graphene nanohybrids for effective photocatalytic purification of wastewater under visible light

In this report, magnetically recoverable sulfur-doped SnFe₂O₄/graphene (S-SFO/GR) nanohybrids have been successfully developed via a facile solvothermal method. The characterizations on the structural, morphology, and optical properties of the nanohybrids indicate that S-SFO particles are successfully embedded on the GR nanosheets. The photocatalytic activity has been evaluated by photocatalytic degradation of chlorotetracycline under visible light irradiation. Among the composites with various mass ratios, the quasi-first-order rate constant of the nanohybrids formed with 9wt% S in SFO and 15wt% GR (9S-SFO/GR-15) can reach as high as 1.83min^-1, which is much higher than that of SFO (0.68min^-1) and SFO/GR (0.91min^-1), confirming the important role of S and GR for the photocatalytic process. The combination of the three components of S, SFO, and GR has enhanced the visible light absorption capability and inhibited the recombination of photogenerated electron-hole. The 9S-SFO/GR-15 nanohybrids can be recovered easily by a magnet and reused for five times with remained photocatalytic efficiency about 70%. A possible catalytic mechanism explaining the efficient photocatalytic performances of the prepared nanohybrids has been proposed.

Degradation of the cyanotoxin microcystin-LR using iron-based photocatalysts under visible light illumination

In this study, a simple and low-cost method to synthesize iron(III) oxide nanopowders in large quantity was successfully developed for the photocatalytic degradation of microcystin-LR (MC-LR). Two visible light-active iron(III) oxide samples (MG-9 calcined at 200 °C for 5 h and MG-11 calcined at 180 °C for 16 h) with a particle size of 5-20 nm were prepared via thermal decomposition of ferrous oxalate dihydrate in air without any other modifications such as doping. The synthesized samples were characterized by X-ray powder diffraction, ⁵⁷Fe Mössbauer spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) specific surface area analysis, and UV-visible diffuse reflectance spectroscopy. The samples exhibited similar phase composition (a mixture of α-Fe₂O₃ and γ-Fe₂O₃), particle size distribution (5-20 nm), particle morphology, and degree of agglomeration, but different specific surface areas (234 m² g^-1 for MG-9 and 207 m² g^-1 for MG-11). The results confirmed higher photocatalytic activity of the catalyst with higher specific surface area. The highest photocatalytic activity of the sample to decompose MC-LR was observed at solution pH of 3.0 and catalyst loading of 0.5 g L^-1 due to large amount of MC-LR adsorption, but a little iron dissolution of 0.0065 wt% was observed. However, no iron leaching was observed at pH 5.8 even though the overall MC-LR removal was slightly lower than at pH 3.0. Thus, the pH 5.8 could be an appropriate operating condition for the catalyst to avoid problems of iron contamination by the catalyst. Moreover, magnetic behavior of γ-Fe₂O₃ gives a possibility for an easy separation of the catalyst particles after their use.

Efficient visible light-driven in situ photocatalytic destruction of harmful alga by worm-like N,P co-doped TiO2/expanded graphite carbon layer (NPT-EGC) floating composites

Preparation of N,P co-doped TiO₂/expanded graphite carbon layer (NPT-EGC) composites for floating algaecides.

Use of Selected Scavengers for the Determination of NF-TiO2 Reactive Oxygen Species during the Degradation of Microcystin-LR under Visible Light Irradiation

Although UV-induced TiO₂ photocatalysis involves the generation of several reactive oxygen species (ROS), the formation of hydroxyl radicals are generally associated with the degradation of persistent organic contaminants in water. In this study, a variety of radical scavengers were employed to discriminate the roles of different ROS during visible light activated (VLA) photocatalysis using nitrogen and fluorine doped TiO₂ (NF-TiO₂) in the degradation of the hepatotoxin, microcystin-LR (MC-LR) in water. The addition of hydroxyl radical scavengers, methanol and tert-butyl alcohol to the reaction mixture resulted in negligible inhibition of VLA NF-TiO₂ photocatalytic degradation of MCLR at pH 3.0 and only partial inhibition at pH 5.7. While hydroxyl radicals generally play the primary role in UV TiO₂ photocatalysis, the minimal influence of MeOH and t-BuOH on the degradation process under these experimental conditions indicates hydroxyl radicals (^•OH) do not play the primary role in VLA NF-TiO₂ photocatalysis. However, strong inhibition was observed in VLA NF-TiO₂ photocatalytic degradation of MC-LR in the presence of superoxide dismutase, benzoquinone and catalase at pH 3.0 and 5.7 indicating O₂^•- and H₂O₂ play critical roles in the degradation process. Similar degradation rates were observed in the presence of singlet oxygen scavenger, deuterium oxide, which enhances singlet oxygen mediated processes further suggesting singlet oxygen does not play a key role in the degradation of MCLR in these system. Formic acid and cupric nitrate were added to probe the roles of the valence band holes and conduction band electrons, respectively. Under UV+vis light irradiation, almost complete inhibition of MC-LR removal is observed with NF-TiO₂ in the presence of ^•OH scavengers at pH 5.7. These results demonstrate that solution pH plays a major role in the formation and reactivities of ROS during VLA NF-TiO₂ photocatalysis. The adsorption strength of the scavengers and MCLR onto NF-TiO₂ as well as the speciation of the ROS as a function of pH need to be carefully considered since they also play a key role in the efficiency of the process. These results indicate the reduction of molecular oxygen by photo-generated electrons rather than hydroxyl radicals produced by oxidative reactions of photo-generated holes play a key role in the of VLA NF-TiO₂ photocatalytic degradation of MC-LR.

Environmentally relevant impacts of nano-TiO2 on abiotic degradation of bisphenol A under sunlight irradiation

Understanding the effects of nano-TiO2 particles on the environmental behaviors of organic pollutants in natural aquatic environments is of paramount importance considering that large amount of nano-TiO2 is being released in the environment. In this study, the effect of nano-TiO2 on the degradation of bisphenol A (BPA) in water was investigated under simulated solar light irradiation. The results indicated that nano-TiO2 at environmentally relevant concentration (1 mg/L) could significantly facilitate the abiotic degradation of BPA (also at low concentration) under mild solar light irradiation, with the pseudo first-order rate constant (kobs) for BPA degradation raised by 1-2 orders of magnitude. As reflected by the inhibition experiments, hydroxyl radicals (OHs) and superoxide radical species were the predominant active species responsible for BPA degradation. The reaction was affected by water pH, and the degradation rate was higher at acidic or alkaline conditions than that at neutral condition. Humic acid (HA) also affected the reaction rate, depending on its concentration. At lower concentration (the mass ratio of HA/nano-TiO2 was 0.1:1), HA improved the dispersion and stability of nano-TiO2 in aquatic environment. As a result, the yield of OHs by nano-TiO2 under sunlight irradiation increased and BPA degradation was facilitated. When the HA concentration increased, a coating of HA formed on the surface of nano-TiO2. Although nano-TiO2 became more stable, the light absorption by nano-TiO2 was significantly reduced due to the strong light absorption of the HA coated on the surface. As a consequence, the yield of OH decreased and BPA degradation was depressed. The results imply that nano-TiO2 at low concentration may distinctly mediate BPA degradation, and can contribute to the natural attenuation of some organic pollutants in aquatic environment with low level of HA. However, this process would be significantly reduced in the presence of high level of HA.

Formation of hydroxyl radicals and kinetic study of 2-chlorophenol photocatalytic oxidation using C-doped TiO2, N-doped TiO2, and C,N Co-doped TiO2 under visible light

This work reports on synthesis, characterization, adsorption ability, formation rate of hydroxyl radicals (OH(•)), photocatalytic oxidation kinetics, and mineralization ability of C-doped titanium dioxide (TiO2), N-doped TiO2, and C,N co-doped TiO2 prepared by the sol-gel method. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-visible spectroscopy were used to analyze the titania. The rate of formation of OH(•) for each type of titania was determined, and the OH-index was calculated. The kinetics of as-synthesized TiO2 catalysts in photocatalytic oxidation of 2-chlorophenol (2-CP) under visible light irradiation were evaluated. Results revealed that nitrogen was incorporated into the lattice of titania with the structure of O-Ti-N linkages in N-doped TiO2 and C,N co-doped TiO2. Carbon was joined to the Ti-O-C bond in the C-doped TiO2 and C,N co-doped TiO2. The 2-CP adsorption ability of C,N co-doped TiO2 and C-doped TiO2 originated from a layer composed of a complex carbonaceous mixture at the surface of TiO2. C,N co-doped TiO2 had highest formation rate of OH(•) and photocatalytic activity due to a synergistic effect of carbon and nitrogen co-doping. The order of photocatalytic activity per unit surface area was the same as that of the formation rate of OH(•) unit surface area in the following order: C,N co-doped TiO2 > C-doped TiO2 > N-doped TiO2 > undoped TiO2.

A hybrid adsorbent/visible light photocatalyst for the abatement of microcystin-LR in water

A hybrid adsorbent/photocatalyst was obtained and used for the removal of microcystin-LR, a potent toxin, from water via adsorption and photocatalyzed oxidation with singlet oxygen. The combined adsorption/photooxidation processes yielded a 500-fold decrease of the overall MC-LR concentration. The adsorbent/photocatalyst can be easily removed from the reaction system by sedimentation or centrifugation.

Nitrogen-fluorine co-doped titania inverse opals for enhanced solar light driven photocatalysis

Three dimensionally ordered nitrogen-fluorine (N-F) co-doped TiO2 inverse opals (IOs) were fabricated by templating with polystyrene (PS) colloidal photonic crystals (CPCs) by infiltration. During preparation, the TiO2 precursor was treated with a mixture of nitric acid and trifluoroacetic acid to facilitate N-F co-doping into the TiO2 lattice. Enhanced solar light absorption was observed in the samples as a consequence of the red shift in the electronic band gap of TiO2 due to N-F co-doping. The photonic band gap (PBG) of these TiO2 IO films was tuned by varying the sphere size of the PS CPC templates. The as-prepared N-F co-doped TiO2 IO films were used as photocatalysts for the degradation of Rhodamine B (RhB) dye under solar light irradiation. A significant enhancement in the photocatalytic activity was observed in N-F co-doped TiO2 IO films prepared using PS spheres of 215 nm as a template, with the red edge of the PBG closer to the electronic band gap (EBG) of TiO2. 100% of the dye molecules were degraded within 2 minutes under direct solar irradiation, which is one of the fastest reaction times ever reported for RhB degradation in the presence of TiO2 photocatalysts. The N-F co-doped TiO2 IO film prepared using PS of 460 nm with its PBG centered at 695 nm also showed good photocatalytic activity. It was found that the IO films displayed improved photocatalytic activity in comparison to ordinary nanocrystalline (nc)-TiO2 films. The enhancement could be attributed to the bandgap scattering effect and the slow photon effect, leading to a significant improvement in solar light harvesting.

The effect of basic pH and carbonate ion on the mechanism of photocatalytic destruction of cylindrospermopsin

This study investigated the mechanistic effects of basic pH and the presence of high carbonate concentration on the TiO2 photocatalytic degradation of the cyanobacterial toxin cylindrospermopsin (CYN). High-performance liquid chromatography combined with quadrupole time-of-flight electrospray ionization tandem mass spectrometry (LC/Q-TOF-ESI-MS) was employed for the identification of reaction byproducts. The reaction pathways were proposed based on the identified degradation byproducts and radical chemistry. In high pH system (pH = 10.5) similar reaction byproducts as those in neutral pH system were identified. However, high pH appeared to inhibit sulfate elimination with less sulfate elimination byproducts detected. In the presence of carbonate in the photocatalytic process, hydroxyl radical reaction would be largely inhibited since carbonate ion would react with hydroxyl radical to form carbonate radical. The second order rate constant of carbonate radical with CYN was estimated to be 1.4 × 10(8) M(-1)s(-1), which is much smaller than that of hydroxyl radical. However, the more significant abundance of carbonate radical in the reaction solution strongly contributed to the transformation of CYN. Carbonate radical has higher reaction selectivity than hydroxyl radical and hence, played a different role in the photocatalytic reaction. It would promote the formation of byproduct m/z 420.12 which has not been identified in the other two studied photocatalytic systems. Besides, the presence of carbonate ion may hinder the removal of toxicity originated from uracil moiety due to the low reaction activity of carbonate radical with uracil moiety in CYN molecule. This work would further support the application of photocatalytic technologies for CYN treatment and provide fundamental information for the complete assessment of CYN removal by using TiO2 photocatalysis process.

Enhanced visible light photocatalytic activity of a floating photocatalyst based on B–N-codoped TiO2 grafted on expanded perlite

Floatable photocatalyst for in situ environmental remediation with enhanced visible light driven photocatalytic activity.

Nanodiamond–TiO2 composites for photocatalytic degradation of microcystin-LA in aqueous solutions under simulated solar light

Microcystin MC-LA degradation by a nanostructured solar photocatalyst.