Surface molecular imprinting on g-C3N4 photooxidative nanozyme for improved colorimetric biosensing

Nanozyme-catalyzed and zwitterion-modified swabs based for the detection of Listeria monocytogenes in complex matrices

In recent years, nanozymes have been widely used in the field of biosensing and food safety testing due to their advantages of low cost, high stability, easy modification and adjustable catalytic activity. However, how to reduce the signal interference generated by reducing substances, macromolecules and colored substances in the food matrix in nanozymes-based colorimetric sensing is still a major challenge. In this paper, using Listeria monocytogenes as a model analyte, sodium sulfonyl methacrylate (SBMA) polymers were modified onto cotton swabs by photothermal polymerization and combined with Listeria monocytogenes-specific aptamer (Apt1) to prepare swabs that can specifically capture and isolate Listeria monocytogenes from complex matrices (SBMA/Apt1 cotton swab). In addition, in combination with the inhibitory effect of the aptamer (Apt2) on the oxidase activity of Mn3O4 NPs, a colorimetric biosensor based on nanozymes that can quantitatively, sensitively, and specifically identify Listeria monocytogenes in food products was constructed. The results showed that the colorimetric signal of the method was linear with the concentration of Listeria monocytogenes in the range of 2.83-2.83 × 105 CFU/mL, and the limit of detection was 2.64 CFU/mL, which can be used for the detection of Listeria monocytogenes in complex environments and food samples.

Heterojunction of MXenes and MN4-graphene: Machine learning to accelerate the design of bifunctional oxygen electrocatalysts

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are essential for the development of excellent bifunctional electrocatalysts, which are key functions in clean energy production. The emphasis of this study lies in the rapid design and investigation of 153 MN4-graphene (Gra)/ MXene (M2NO) electrocatalysts for ORR/OER catalytic activity using machine learning (ML) and density functional theory (DFT). The DFT results indicated that CoN4-Gra/Ti2NO had both good ORR (0.37 V) and OER (0.30 V) overpotentials, while TiN4-Gra/M2NO and MN4-Gra/Cr2NO had high overpotentials. Our research further indicated orbital spin polarization and d-band centers far from the Fermi energy level, affecting the adsorption energy of oxygen-containing intermediates and thus reducing the catalytic activity. The ML results showed that the gradient boosting regression (GBR) model successfully predicted the overpotentials of the monofunctional catalysts RhN4-Gra/Ti2NO (ORR, 0.39 V) and RuN4-Gra/W2NO (OER, 0.45 V) as well as the overpotentials of the bifunctional catalyst RuN4-Gra/W2NO (ORR, 0.39 V; OER, 0.45 V). The symbolic regression (SR) algorithm was used to construct the overpotential descriptors without environmental variable features to accelerate the catalyst screening and shorten the trial-and-error costs from the source, providing a reliable theoretical basis for the experimental synthesis of MXene heterostructures.

Rational design of nanozyme with integrated sample pretreatment for colorimetric biosensing

Nanozymes have been widely used in the field of biosensing owing to their high stability, low cost, adjustable catalytic activity, and convenient modification. However, achieving high selectivity and sensitivity simultaneously in nanozyme-based colorimetric sensing remains a major challenge. Nanozymes are nanomaterials with enzyme-simulating activity that are often used as solid-phase adsorbents for sample pretreatment. Our design strategy integrated sample pretreatment function into the nanozyme through separation and enrichment, thereby improving the selectivity and sensitivity of nanozyme-based colorimetric biosensing. As a proof-of-concept, glucose was used as the model analyte in this study. A phenylboric acid-modified magnetic nanozyme (Cu/Fe3O4@BA) was rationally designed and synthesized. Selectivity was enhanced by boronate-affinity specific adsorption and the elimination of interference after magnetic separation. In addition, magnetic solid-phase extraction enrichment was used to improve the sensitivity. A recovery rate of more than 80% was reached when the enrichment factor was 50. The synthesized magnetic Cu/Fe3O4@BA was recyclable at least five times. The proposed method exhibited excellent selectivity and sensitivity, simple operation, and recyclability, providing a novel and practical strategy for designing multifunctional nanozymes for biosensing.

Introducing molecular imprinting onto nanozymes: toward selective catalytic analysis

The discovery of enzyme-like catalytic characteristics in nanomaterials triggers the generation of nanozymes and their multifarious applications. As a class of artificial mimetic enzymes, nanozymes are widely recognized to have better stability and lower cost than natural bio-enzymes, but the lack of catalytic specificity hinders their wider use. To solve the problem, several potential strategies are explored, among which molecular imprinting attracts much attention because of its powerful capacity for creating specific binding cavities as biomimetic receptors. Attractively, introducing molecularly imprinted polymers (MIPs) onto nanozyme surfaces can make an impact on the latter's catalytic activity. As a result, in recent years, MIPs featuring universal fabrication, low cost, and good stability have been intensively integrated with nanozymes for biochemical detection. In this critical review, we first summarize the general fabrication of nanozyme@MIPs, followed by clarifying the potential effects of molecular imprinting on the catalytic performance of nanozymes in terms of selectivity and activity. Typical examples are emphatically discussed to highlight the latest progress of nanozyme@MIPs applied in catalytic analysis. In the end, personal viewpoints on the future directions of nanozyme@MIPs are presented, to provide a reference for studying the interactions between MIPs and nanozymes and attract more efforts to advance this promising area.

A comprehensive exploration of the latest innovations for advancements in enhancing selectivity of nanozymes for theranostic nanoplatforms

Nanozymes have captured significant attention as a versatile and promising alternative to natural enzymes in catalytic applications, with wide-ranging implications for both diagnosis and therapy. However, the limited selectivity exhibited by many nanozymes presents challenges to their efficacy in diagnosis and raises concerns regarding their impact on the progression of disease treatments. In this article, we explore the latest innovations aimed at enhancing the selectivity of nanozymes, thereby expanding their applications in theranostic nanoplatforms. We place paramount importance on the critical development of highly selective nanozymes and present innovative strategies that have yielded remarkable outcomes in augmenting selectivities. The strategies encompass enhancements in analyte selectivity by incorporating recognition units, refining activity selectivity through the meticulous control of structural and elemental composition, integrating synergistic materials, fabricating selective nanomaterials, and comprehensively fine-tuning selectivity via approaches such as surface modification, cascade nanozyme systems, and manipulation of external stimuli. Additionally, we propose optimized approaches to propel the further advancement of these tailored nanozymes while considering the limitations associated with existing techniques. Our ultimate objective is to present a comprehensive solution that effectively addresses the limitations attributed to non-selective nanozymes, thus unlocking the full potential of these catalytic systems in the realm of theranostics.

Light-activated carbon dot nanozyme with scandium for a highly efficient and pH-universal bio-nanozyme cascade colorimetric assay

Nanozyme-based colorimetric assays have attracted much attention due to their cost-effectiveness, high stability, and sensitivity. In particular, the catalytic cascade imparted by the biological enzyme is highly selective. However, developing an efficient, one-pot, and pH-universal bio-nanozyme cascade remains challenging. Considering the tunable activity of the photo-activated nanozyme, we herein demonstrated a pH-universal colorimetric assay based on the Sc³⁺-boosted photocatalytic oxidation of carbon dots (C-dots). As a strong Lewis acid, Sc³⁺ shows ultra-fast complexation with OH^- over a broad pH range and dramatically decreases the pH of the buffer solutions. In addition to regulating the pH, Sc³⁺ also binds to the C-dots to produce a persistent and strongly oxidizing intermediate based on photo-induced electron transfer. The proposed Sc³⁺-boosted photocatalytic system was successfully used in a cascade colorimetric assay with biological enzymes for assessing their activity as well as the detection of enzyme inhibitors at neutral and alkaline pH. Instead of designing new nanozymes for catalytic cascades, this work suggests that introducing promoters can be a convenient strategy in practical applications.

Single transition metal-decorated C4N/MoS2 heterostructure for boosting oxygen reduction, oxygen evolution, and hydrogen evolution

Multifunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution (HER) are required preconditions for the development of a highly promising new green energy conversion and storage technology. Herein, a comprehensive computation of the ORR, OER and HER catalytic performance for the pristine and metal-decorated C₄N/MoS₂ (TM-C₄N/MoS₂) is researched using density functional theory. Remarkably, Pd-C₄N/MoS₂ exhibits distinguished bifunctional catalytic performance with lower ORR/OER overpotentials of 0.34/0.40 V. Rh-C₄N/MoS₂ is the prospective trifunctional catalyst with the low ORR/OER/HER overpotentials of 0.48/0.55/-0.16 V, but its electrochemical stability needs to be further improved. Furthermore, the strong correlation between intrinsic descriptor (φ) and adsorption free energy of *OH verifies that the catalytic activity of TM-C₄N/MoS₂ is affected by active metal and surrounding coordination environment. The heap map has summarized the correlations of d-band center, adsorption free energy of reaction species, and φ as the vital parameter for ORR/OER overpotentials of designing catalysts. The electronic structure analysis uncovers the activity enhancement is due to the adjustable adsorption behavior of reaction intermediates on TM-C₄N/MoS₂. This finding paves the way to develop high-activity and multifunctional catalysts, making them suitable for multifunctional applications in the forthcoming critically needed green energy conversion and storage technologies.

Ruthenium-Encapsulated Porphyrinic Organic Polymer as a Photoresponsive Oxidoreductase Mimetic Nanozyme for Colorimetric Sensing

The advantages of porosity and stable unpaired electrons of porphyrinic organic polymers (POPs) with free radicals are exclusive and potentially practical functionalities and combining the semiconductor-like characteristics of these materials and metal ions has been an effective way to assemble an efficient photocatalytic system. Herein, a new ruthenium (Ru) ion-encapsulated porphyrinic organic polymer (POP/Ru) is facilely synthesized as a proper photoresponsive nanozyme with unique photo-oxidase properties. Surprisingly, the proposed POP/Ru revealed outstanding photoresponsive oxidase-mimicking activity due to the synergetic effect of the integration of Ru and π-electrons of POP, which boosts charge separation and transport. POP/Ru was applied to the oxidation of o-phenylenediamine (o-PDA) as a chromogenic probe for producing a colorimetric signal. The kinetic study reveals that these photo-oxidase mimics have a significant affinity for the o-PDA chromogenic agent owing to a lower K_m and superior V_max. Further findings demonstrate that the presence of the l-arginine (l-Arg) target causes an inhibition effect on the photo-nanozymatic colorimetry of POP/Ru. This research develops the applications of the comprehensive colorimetric strategy for ultrasensitive l-Arg monitoring with a limit of detection (LOD) of 15.2 nM in the dynamic range of 4.0 nM-340 μM and illuminates that the proposed photo-oxidase nanozyme as a visual strategy is feasible in l-Arg environmentally friendly colorimetric detection in juice samples.

Alkali-Etched Imprinted Mn-Based Prussian Blue Analogues with Superior Oxidase-Mimetic Activity and Precise Recognition for Tetracycline Colorimetric Sensing

As a typical antibiotic pollutant, tetracycline (TC) is producing increasing threats to the ecosystem and human health, and exploring convenient means for monitoring of TC is needed. Here, we proposed alkali-etched imprinted Mn-based Prussian blue analogues featuring superior oxidase-mimetic activity and precise recognition for the colorimetric sensing of TC. Simply etching Mn-based Prussian blue analogues (Mn-PBAs) with NaOH could expose the sites and surfaces to significantly improve their catalytic activity. Density functional theory calculations were employed to screen the molecularly imprinted polymer (MIP) layer for target identification. Consequently, the designed Mn-PBA_NaOH@MIP possessed the rich channels for substrates to get in touch with the active Mn-PBA_NaOH core, showing an excellent catalytic capacity to trigger the chromogenic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) without the use of H₂O₂. If TC was introduced, it would be recognized selectively by the MIP shell and masked the channels for TMB access, resulting in the obstruction of the chromogenic reaction. According to this mechanism, selective optical detection of TC was achieved, and performance stability, reusability, and reliability as well as practicability were also verified, promising potential for TC monitoring in complex matrices. Our work not only presents an effective way to enhance the enzyme-like activity of Prussian blue analogues but also provides a facile approach for TC sensing. Additionally, the work will inspire the exploration of molecularly imprinted nanozymes for various applications.

Nanozymes towards Personalized Diagnostics: A Recent Progress in Biosensing

This review highlights the recent advancements in the field of nanozymes and their applications in the development of point-of-care biosensors. The use of nanozymes as enzyme-mimicking components in biosensing systems has led to improved performance and miniaturization of these sensors. The unique properties of nanozymes, such as high stability, robustness, and surface tunability, make them an attractive alternative to traditional enzymes in biosensing applications. Researchers have explored a wide range of nanomaterials, including metals, metal oxides, and metal-organic frameworks, for the development of nanozyme-based biosensors. Different sensing strategies, such as colorimetric, fluorescent, electrochemical and SERS, have been implemented using nanozymes as signal-producing components. Despite the numerous advantages, there are also challenges associated with nanozyme-based biosensors, including stability and specificity, which need to be addressed for their wider applications. The future of nanozyme-based biosensors looks promising, with the potential to bring a paradigm shift in biomolecular sensing. The development of highly specific, multi-enzyme mimicking nanozymes could lead to the creation of highly sensitive and low-biofouling biosensors. Integration of nanozymes into point-of-care diagnostics promises to revolutionize healthcare by improving patient outcomes and reducing costs while enhancing the accuracy and sensitivity of diagnostic tools.

Construction of metal (Mn, Ce, Eu)-containing species in CN nanocomposites with photo-responsive oxidase-mimicking activity for multi-antioxidant discrimination

On the basis of three M-CN nanocomposites with photo-oxidase activity, a colorimetric sensor is proposed for the pattern recognition of antioxidants.

Constructing porous intramolecular donor–acceptor integrated carbon nitride doped with m-aminophenol for boosting photocatalytic degradation and hydrogen evolution activity

A porous intramolecular D–A integrated carbon nitride with boosted photocatalytic activity was constructed via thermal melting followed by thermal copolymerization of m-aminophenol with urea.

Nanozyme-based sensors for detection of food biomarkers: a review

Nanozymes have piqued the curiosity of scientists in recent years because of their ability to demonstrate enzyme-like activity combined with advantages such as high stability, inexpensive availability, robust activity, and tunable properties. These attributes have allowed the successful application of nanozymes in sensing to detect various chemical and biological target analytes, overcoming the shortcomings of conventional detection techniques. In this review, we discuss recent developments of nanozyme-based sensors to detect biomarkers associated with food quality and safety. First, we present a brief introduction to this topic, followed by discussing the different types of sensors used in food biomarker detection. We then highlight recent studies on nanozyme-based sensors to detect food markers such as toxins, pathogens, antibiotics, growth hormones, metal ions, additives, small molecules, and drug residues. In the subsequent section, we discuss the challenges and possible solutions towards the development of nanozyme-based sensors for application in the food industry. Finally, we conclude the review by discussing future perspectives of this field towards successful detection and monitoring of food analytes.

We present a discussion on different types of sensors used in food biomarker detection and highlight recent studies on nanozyme-based sensors to detect markers like toxins, pathogens, antibiotics, growth hormones, metal ions, additives, small molecules, drug residues.

Aggregation-Induced Emission Effect within Peroxyoxalate-Loaded Mesoporous Silica Nanoparticles for Efficient Harvest of Chemiluminescence Energy in Aqueous Solutions

Aggregation-induced emission (AIE) molecules that can avoid the aggregation-caused quenching (ACQ) effect and break the concentration limit have been widely used for biosensing. Similar to fluorescence dyes, AIE molecules can be chemiexcited simply by a peroxyoxalate-based chemiluminescence (CL) reaction, but the hydrolysis of peroxyoxalate is often a problem in an aqueous solution. Herein, we report an AIE effect within peroxyoxalate-loaded silica nanoparticles (PMSNs) for an efficient harvest of CL energy as well as alleviation of bis(2,4,5-trichloro-6-carbopentoxyphenyl) oxalate (CPPO) hydrolysis. Peroxyoxalate (i.e., CPPO) and AIE molecules (i.e., 1,2-benzothiazol-2-triphenylamino acrylonitrile, BTPA) were loaded together within the mesoporous silica nanoparticles (MSNs) to synthesize the BTPA-PMSN nanocomposite. The BTPA-PMSNs not only allowed CPPO to be dispersed well in an aqueous solution but also avoided the hydrolysis of CPPO. Meanwhile, the proximity between BTPA and CPPO molecules in the mesopores of MSNs facilitated the BTPA aggregate to harvest the energy from CL intermediates. Hence, the CL system of BTPA-PMSNs can work efficiently in aqueous solutions at a physiological pH. The CL quantum yield of the BTPA-PMSN system was measured to be 9.91 × 10^-5, about 20 000-fold higher than that obtained in the rhodamine B (RhB, a typical ACQ dye)-PMSN system. Using BTPA-PMSNs for H₂O₂ sensing, a limit of detection (LOD) as low as 5 nM can be achieved, 1000-fold lower than that achieved in the RhB-PMSNs system. Due to the feasibility of working at a physiological pH, this CL system is also quite suitable for the detection of oxidase substrates such as glucose and cholesterol. This BTPA-PMSN CL system with the merits of high CL quantum yield at a physiological pH is appealing for biosensing.

N-doped MoS2-nanoflowers as peroxidase-like nanozymes for total antioxidant capacity assay

Total Antioxidant Capacity (TAC) Assay plays an important role in evaluating the quality of antioxidant food and monitoring the oxidative stress level of human body. It is mainly achieved by measuring the contents of antioxidants such as AA, L-Cys and GSH, while TAC can be detected by using peroxidase-like activity of artificial nanoenzyme materials. In this work, the N-Doped, defect-rich N-MoS₂NFs nano-materials were used to build the nano enzyme, which has strong stability and high peroxidase-like activity. H₂O₂ was detected because it can be catalyzed to generate the intermediate ·OH and make TMB appears blue. However, when H₂O₂, AA, L-Cys and GSH coexist in solution, due to the oxidation resistance of AA, L-Cys and GSH, they can competitively react with ·OH in solution or reduce TMB in oxidation state (oxTMB), which reduces the characteristic absorption of oxTMB, indirectly achieves the purpose of detecting AA, L-Cys and GSH, and finally realizes the determination of TAC, even in actual serum and saliva samples. At the same time, the N-MoS₂ NFs/NH₂-MIL-53(Al)+OPD system is further constructed. Based on the fluorescence resonance energy transfer (FRET) between NH₂-MIL-53(Al) and oxidized OPD (oxOPD), the purpose of detecting TAC by fluorescence method was realized.

New carbon nitride close to C6N7 with superior visible light absorption for highly efficient photocatalysis

The rational design and construction of novel two-dimensional (2D) carbon nitrides (CNs) beyond g-C₃N₄ is a hot topic in the fields of chemistry and materials. Inspired by the polymerisation of urea, we have prepared a series of novel C-C bridged heptazine CNs UO_x (where x is the ratio of urea to oxamide, x = 1, 1.5, 2, 2.5, and 3), which are similar to (C₆N₇)_n, upon the introduction of oxamide. As predicted using density functional theory (DFT) calculations, the conjugated structure of UO_x was effectively extended from an individual heptazine to the entire material. Consequently, its bandgap was reduced to 2.05 eV, and its absorption band edge was significantly extended to 600 nm. Furthermore, its carrier transfer and separation were significantly enhanced, establishing its superior photocatalytic activity. The optimised UO₂ exhibits a superior photocatalytic hydrogen production rate about 108.59 μmol h^-1 (using 10 mg of catalyst) with an apparent quantum efficiency (AQE) of 36.12% and 0.33% at 420 and 600 nm, respectively, which is one of the most active novel CNs reported to date. Moreover, UO₂ exhibits excellent photocatalytic activity toward the oxidation of diphenylhydrazine to azobenzene with conversion and selectivity reaching ~100%, which represents a promising highly efficient 2D CN material. Regarding phenols degradation, UO₂ also displayed significantly higher activity and durability during the degradation of phenol when compared to traditional g-C₃N₄, highlighting its significant potential for application in energy, environment and photocatalytic organic reactions.

Nanozyme Applications: A Glimpse of Insight in Food Safety

Nanozymes own striking merits, including high enzyme-mimicking activity, good stability, and low cost. Due to the powerful and distinguished functions, nanozymes exhibit widespread applications in the field of biosensing and immunoassay, attracting researchers in various fields to design and engineer nanozymes. Recently, nanozymes have been innovatively used to bridge nanotechnology with analytical techniques to achieve the high sensitivity, specificity, and reproducibility. However, the applications of nanozymes in food applications are seldom reviewed. In this review, we summarize several typical nanozymes and provide a comprehensive description of the history, principles, designs, and applications of nanozyme-based analytical techniques in food contaminants detection. Based on engineering and modification of nanozymes, the food contaminants are classified and then discussed in detail via discriminating the roles of nanozymes in various analytical methods, including fluorescence, colorimetric and electrochemical assay, surface-enhanced Raman scattering, magnetic relaxing sensing, and electrochemiluminescence. Further, representative examples of nanozymes-based methods are highlighted for contaminants analysis and inhibition. Finally, the current challenges and prospects of nanozymes are discussed.

Molecular Imprinting on Nanozymes for Sensing Applications

As part of the biomimetic enzyme field, nanomaterial-based artificial enzymes, or nanozymes, have been recognized as highly stable and low-cost alternatives to their natural counterparts. The discovery of enzyme-like activities in nanomaterials triggered a broad range of designs with various composition, size, and shape. An overview of the properties of nanozymes is given, including some examples of enzyme mimics for multiple biosensing approaches. The limitations of nanozymes regarding lack of selectivity and low catalytic efficiency may be surpassed by their easy surface modification, and it is possible to tune specific properties. From this perspective, molecularly imprinted polymers have been successfully combined with nanozymes as biomimetic receptors conferring selectivity and improving catalytic performance. Compelling works on constructing imprinted polymer layers on nanozymes to achieve enhanced catalytic efficiency and selective recognition, requisites for broad implementation in biosensing devices, are reviewed. Multimodal biomimetic enzyme-like biosensing platforms can offer additional advantages concerning responsiveness to different microenvironments and external stimuli. Ultimately, progress in biomimetic imprinted nanozymes may open new horizons in a wide range of biosensing applications.

Sustainable Carbon Materials toward Emerging Applications

It is desirable for a sustainable society that the production and utilization of renewable materials are net-zero in terms of carbon emissions. Carbon materials with emerging applications in CO₂ utilization, renewable energy storage and conversion, and biomedicine have attracted much attention both academically and industrially. However, the preparation process of some new carbon materials suffers from energy consumption and environmental pollution issues. Therefore, the development of low-cost, scalable, industrially and economically attractive, sustainable carbon material preparation methods are required. In this regard, the use of biomass and its derivatives as a precursor of carbon materials is a major feature of sustainability. Recent advances in the synthetic strategy of sustainable carbon materials and their emerging applications are summarized in this short review. Emphasis is made on the discussion of the original intentions and various sustainable strategies for producing sustainable carbon materials. This review provides basic insights and significant guidelines for the further design of sustainable carbon materials and their emerging applications in catalysis and the biomedical field.

Does the intrinsic photocontrollable oxidase-mimicking activity of 2-aminoterephthalic acid dominate the activity of metal–organic frameworks?

The ligand ATA possesses intrinsic photocontrolled oxidase-like activity, showing promise in designing ATA-MOF with photoresponsive enzyme-like activity like Al-ATA and establishing the colorimetric strategy for Cu²⁺ detection.

Restricted binding of a model protein on C3N4 nanosheets suggests an adequate biocompatibility of the nanomaterial

The fixed binding pattern of protein adsorption to C₃N₄ plays a major role in the nanomaterial biocompatibility, which results from the inherent porous surface structure.

Carbon nanocage-based nanozyme as an endogenous H2O2-activated oxygenerator for real-time bimodal imaging and enhanced phototherapy of esophageal cancer

Intelligent phototherapy by theranostic nanosystems that can be activated by a tumor microenvironment has high sensitivity and specificity. However, hypoxia and low drug accumulation in tumors greatly limit its clinical application. Herein, we have designed a cage-like carbon-manganese nanozyme, which effectively relieves tumor hypoxia and delivers numerous photosensitizers (PSs) to the tumor site, for real-time imaging and enhanced phototherapy of esophageal cancer. Specifically, bovine serum albumin (BSA) was used as a template and reducing agent for preparing a BSA-MnO2 nanozyme; then a BSA-MnO2/IR820@OCNC (BMIOC) nanosystem was successfully synthesized by crosslinking BSA-MnO2 on the surface of IR820-loaded carboxylated carbon nanocages (OCNCs). Abundant PSs were successfully delivered to tumor sites via hollow OCNCs, and the final loading rate of IR820 reached 42.8%. The intratumor BMIOC nanosystem can be initiated by a tumor microenvironment to switch on its magnetic resonance (MR) imaging signal, and photothermal therapy (PTT) and photodynamic therapy (PDT) functions. Notably, the BSA-MnO2 nanozyme, with intrinsic catalase (CAT)-like activity, catalyzed endogenous H2O2 for oxygen generation to overcome tumor hypoxia and enhance PDT, thereby leading to more efficient therapeutic effects in combination with OCNC-elevated PTT. In addition, the H2O2-activated and acid-enhanced properties enable our nanosystem to be specific to tumors, protecting normal tissues from damage. By integrating a high drug loading capacity, a hypoxia regulation function, an enlarged phototherapy effect, and bimodal imaging into a nanozyme-mediated nanoreactor, this work realizes a "one for all" system and represents promising clinical translation for efficient esophageal cancer theranostics.

Suppressing the background activity of hemin for boosting the sensitivity of DNAzyme-based biosensors by SYBR Green I

Peroxidase-like DNAzymes have been extensively used to replace horseradish peroxidase (HRP) for developing biosensors for signal amplification. However, the background activity from the cofactor (i.e., free hemin) has limited the sensitivity of such sensors. Herein, we aim to find an inhibitor for hemin to suppress the background signal, and a classic split DNAzyme-based sensor was used to detect a complementary DNA oligonucleotide. After screening a series of dyes, SYBR Green I (SG, one of the DNA stanning dyes) was selected for suppressing the background. Simply by adding 0.84 μM SG, the background from 50 nM hemin was suppressed over 30-fold. The suppression was caused by the interaction between SG and hemin. In the presence of the target DNA, the formed duplex region and G-quadruplex structure can better bind SG and hemin respectively, thus preventing the interaction between them and showing a high activity of the DNAzyme. The optimized sensor showed a detection limit of 3.8 pM for the target DNA (p53 gene). In addition, the backgrounds from chemiluminescence, colorimetric and fluorescence sensing modes can all be reduced by adding SG to the split DNAzyme system. The suppression of the background of peroxidase DNAzymes is a critical step towards practical use of related biosensors.

Rationale of 3,3',5,5'-Tetramethylbenzidine as the Chromogenic Substrate in Colorimetric Analysis

Horseradish peroxidase (HRP)-based assays feature particular interests because of the simple colorimetric readout. In these assays, 3,3',5,5'-tetramethylbenzidine (TMB) is the most widely used chromogenic substrates for HRP. The later research in nanozyme and DNAzyme also used TMB (the chosen substrate) because they are both HRP-mimics. It should be noted that the substrate of HRP is not just limited to TMB but, in fact, a broad range of benzidine derivatives. However, except decreased carcinogenicity due to tetrasubstitution of benzidine, the rationale for the chosen substrate TMB is not clear yet. Here, we addressed such a fundamental issue from the chemistry point of view. Nine benzidine derivatives featuring varied properties (different substitution groups and varied number of substitutions) were selected and investigated with four typical TMB-involved chromogenic systems. Among the existing benzidine substrates that are used for peroxidase-based assays, TMB exhibited the highest sensitivity, better color purity of colored products, and reasonable stability of oxidation products. Moreover, two tetrasubstituted benzidine derivatives other than TMB (4OCH₃ and 2OCH₃2CH₃) were synthesized for comparison. It turned out that the performances (sensitivity, color purity, and stability of the colored products) of TMB are still superior, thus chemically confirming its status of "the chosen substrate" in colorimetric assays.

Graphene oxide as a cartridge enable on-line assembly of photosensitizer for 1O2-based electrochemical aptasensing

An ultrasensitive ¹O₂-based electrochemical aptasensor by on-line assembly of photosensitizers using graphene oxide (GO) as a cartridge is reported. In the presence of target protein lysozyme, the interaction of lysozyme with aptamer led to the dissociation of dsDNA and release of the aptamer-lysozyme complex to solution, with DNA-c retaining on the electrode; then, the photosensitizer phloxine B (PB) was assembled on the electrode since GO can simultaneously adsorb DNA-c and PB molecules. Upon irradiation by a green LED, ¹O₂ was generated by photocatalysis of PB molecules and then cleaved the DNA-c, leading to remarkably decreased impedance signals that linearly respond with the logarithm of lysozyme concentration. Benefitting from the efficient photosensitization ability of PB and the high PB-loading capacity of GO, the developed sensor allowed determination of 0.001 to 100 nM lysozyme with a limit of detection of about 0.14 pM. The relative standard deviation (RSD) for five independent electrodes with 1 nM lysozyme was 3.1%, indicating satisfactory reproducibility. The sensor also showed excellent selectivity toward lysozyme in the presence of interfering substances and was applied to the determination of lysozyme in urine samples with recoveries ranging from 91 to 101%. The on-line assembly of photosensitizer technique opens a new way for amplified electrosensing of biomolecules. Graphical abstract An on-line assembly of photosensitizers and DNA on electrode was developed using graphene oxide a cartridge and the photocatalytic electrosensor can be used for label-free detection of lysozyme as low as 1 pM.

Porous visible light-responsive Fe3+-doped carbon nitride for efficient degradation of sulfadiazine

The development of efficient solar driven catalyst for the degradation of antibiotics has become increasingly important in environmental protection. However, the reported efficient photocatalysts for antibiotic degradation are limited. In this work, porous Fe³⁺-doped graphitic carbon nitride (g-C₃N₄) with outstanding photocatalytic ability is synthesized and then used as the photocatalyst for the efficient degradation of sulfadiazine (SDZ) under visible light. A series of characterization results indicate that Fe³⁺ is successfully doped into the interlayer of g-C₃N₄ and is stabilized in g-C₃N₄ by Fe-N coordination bond. The SEM, DRS and ESI and transient photocurrent results demonstrated that Fe³⁺-doped g-C₃N₄ has a porous structure, a low band gap, improved separation efficiency of photogenerated electron and holes as well as a wider light absorption range. Such improved physical and chemical properties greatly enhanced the photocatalytic ability. Using Fe³⁺-doped g-C₃N₄ for photocatalytic degradation of SDZ under white light, almost complete degradation of SDZ was achieved with a degradation efficiency as high as 99.8% (whereas only 52.1% for bulk g-C₃N₄) within 90 min. The degradation was mainly ascribe to ¹O₂ during the irradiation, and also a small amount of •O₂^-, OH• and h⁺ are involved in the degradation process. The Fe³⁺-doped g-C₃N₄ was applicable for the degradation of a wide range of antibiotic pollutants.

A triple-channel sensing array for protein discrimination based on multi-photoresponsive g-C3N4

Graphitic carbon nitride (g-C₃N₄) as an outstanding photoresponsive nanomaterial has been widely used in biosensing. Other than the conventional single channel sensing mode, a triple-channel sensing array was developed for high discrimination of proteins based on the photoresponsive g-C₃N₄. Besides the photoluminescence and Rayleigh light scattering features of g-C₃N₄, we exploit the new photosensitive colorimetry of g-C₃N₄ as the third channel optical input. The triple-channel optical behavior of g-C₃N₄ can be synchronously changed after interaction with the protein, resulting in the distinct response patterns related to each specific protein. Such a triple-channel sensing array is demonstrated for highly discriminative and precise identification of nine proteins (hemoglobin, trypsin, lysozyme, cytochrome c, horseradish peroxidase, transferrin, human serum albumin, pepsin, and myoglobin) at 1 μM concentration levels with 100% accuracy. It also can discriminate proteins being present at different concentration and protein mixtures with different content ratios. The practicability of this sensor array is validated by high accuracy identification of nine proteins in human urine samples. This indicates that the array has a great potential in terms of analyzing biological fluids. Graphic abstract .

Light-activated nanozymes: catalytic mechanisms and applications

Recently, nanozymes have attracted enormous interest for their high stability, low cost and various enzyme-like activities. In nature, many biochemical reactions require light. Recently, introducing light to nanozymes has also been reported, especially for photosensitized oxygen activation. Compared to normal nanozymes, light-activated nanozymes possess several advantages including light-regulated activity, using molecular oxygen as a green oxidant, and often higher activity can be achieved. Herein, we summarize light-activated nanozymes, starting from their photophysical processes and identification of reactive oxygen species (ROS). Although the types of light-activated nanozymes are still quite limited and cannot yet mimic the same reactions as natural photo-related enzymes, they have widened the range of nanozymes. A few specific applications are highlighted, including sensing, chemical synthesis, degradation of organic pollutants, and cleavage and repair of DNA. Finally, a few future research opportunities are discussed.

Novel “turn on–off” paper sensor based on nonionic conjugated polythiophene-coated CdTe QDs for efficient visual detection of cholinesterase activity

A novel conjugated polythiophene (CP) compound was successfully combined with CdTe quantum dots to improve their selectivity and sensitivity for the efficient visual detection of AChE activity via the color variation of CdTe/CP.