Nanostructured Ni/Ti3C2T MXene hybrid as cathode for lithium-oxygen battery

Synergized N and P co-doped Ti3C2Tx mxene enabling high-performance Li-air batteries

Lithium-oxygen batteries (LOBs) with a theoretical energy density of up to 3500 Wh kg-1 hold a promise for the next-generation high-energy-density batteries. However, the slow oxygen reduction/evolution kinetics at the cathode limits the performance of Li-air batteries. The rational design of efficient catalysts is essential for the improvement of oxygen electrode reaction kinetics. Herein, we report a facile strategy to co-dope N and P atoms simultaneously into Ti3C2Tx (NP-Ti3C2Tx) MXene via an electrostatic self-assembly approach. The co-doped NP-Ti3C2Tx layers expose abundant active sites, providing more space for accommodating the formed Li2O2. Moreover, the N and P co-doping facilitates efficient electron transport in Ti3C2Tx MXene. The LOB with NP-Ti3C2TX catalyst delivers a high discharge capacity of 24,940 mAh/g at 1000 mA g-1. At a cut-off capacity of 1000 mAh/g, this battery runs continuously for 159, 276, 185, and 229 cycles at current densities of 1000, 2000, 3000, and 5000 mA g-1, respectively. Theoretical calculations unveil that N and P co-doping enables lower ηORR and ηOER of only 0.26 V and 0.13 V on Ti3C2Tx MXene, respectively. This work offers a feasible approach for constructing efficient MXene electrocatalysts for Li-air batteries.

CNT-MXene ultralight membranes: fabrication, surface nano/microstructure, 2D-3D stacking architecture, ion-transport mechanism, and potential application as interlayers for Li-O2 batteries

Multiwalled carbon nanotubes (MWCNTs) have shown effectiveness in improving the suitability of MXenes for energy-related applications. However, the ability of individually dispersed MWCNTs to control the structure of MXene-based macrostructures is unclear. Here, the correlation among composition, surface nano- and microstructure, MXenes' stacking order, structural swelling, and Li-ion transport mechanisms and properties in individually dispersed MWCNT-Ti₃C₂ films was investigated. The compact surface microstructure of MXene film, characterized by prominent wrinkles, is dramatically changed as MWCNTs occupy MXene/MXene edge interfaces. The 2D stacking order is preserved up to 30 wt% MWCNTs despite a significant swelling of ∼400%. Such alignment is completely disrupted at 40 wt%, and a more pronounced surface opening and internal expansion of ∼770% are realized. Both 30 wt% and 40 wt% membranes show stable cycling performance under a significantly higher current density due to faster transport channels. Notably, for the 3D membrane, the overpotential during repeated Li deposition/dissolution reactions is further reduced by ∼50%. Ion-transport mechanisms in the absence and presence of MWCNTs are discussed. Furthermore, ultralight yet continuous hybrid films comprising up to ∼0.027 mg cm^-2 Ti₃C₂ can be prepared using aqueous colloidal dispersions and vacuum filtration for specific applications. The potential application of such ultralight membranes as interlayers for Li-O₂ batteries is briefly examined.

Heterostructural Ni-Ni0.2 Mo0.8 N Interface Engineering Boosts Alkaline Hydrogen Electrocatalysis

Exploring efficient and low-cost bifunctional catalysts for hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) is highly desirable for the achievement of unitized regenerative fuel cells. Herein, a facile method to prepare hetero-interfacial Ni-Ni_0.2 Mo_0.8 N nanosheets with tailored d-band for efficient alkaline hydrogen electrocatalysis is presented. Mechanism studies indicate that interface engineering can downshift the d-band center of Ni-Ni_0.2 Mo_0.8 N nanosheets due to the electron transfer from Ni to Ni_0.2 Mo_0.8 N, which weakens the binding strength of reaction intermediates, thereby boosting the catalytic performance. Relative to pure Ni, Ni-Ni_0.2 Mo_0.8 N nanosheets show a lower overpotential of 83 mV at -10 mA cm^-2 and good stability during 2,000 cycles for HER. Meanwhile, Ni-Ni_0.2 Mo_0.8 N nanosheets exhibit an improved exchange current density for HOR with a 10.2-fold enhancement in comparison with that of pure Ni. This work provides valuable insight into the reasonable design of efficient energy-related electrocatalysts based on the tailoring of d-band center by interface engineering.

Theoretical Design and Structural Modulation of a Surface-Functionalized Ti3C2Tx MXene-Based Heterojunction Electrocatalyst for a Li-Oxygen Battery

Two-dimensional MXene with high conductivity has metastable Ti atoms and inert functional groups on the surface, greatly limiting application in surface-related electrocatalytic reactions. A surface-functionalized nitrogen-doped two-dimensional TiO₂/Ti₃C₂T_x heterojunction (N-TiO₂/Ti₃C₂T_x) was fabricated theoretically, with high conductivity and optimized electrocatalytic active sites. Based on the conductive substrate of Ti₃C₂T_x, the heterojunction remained metallic and efficiently accelerated the transfer of Li⁺ and electrons in the electrode. More importantly, the precise regulation of active sites in the N-TiO₂/Ti₃C₂T_x heterojunction optimized the adsorption for LiO₂ and Li₂O₂, facilitating the sluggish kinetics with a lowest theoretical overpotential in both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Employed as an electrocatalyst in a Li-oxygen battery (Li-O₂ battery), it demonstrated a high specific capacity of 15 298 mAh g^-1 and a superior cyclability with more than 200 cycles at 500 mA g^-1, as well as the swiftly reduced overpotential. Furthermore, combined with the in situ differential electrochemical mass spectrometry, ex situ Raman spectra, and SEM tests, the N-TiO₂/Ti₃C₂T_x heterojunction electrode presented a superior stability and reduced side reaction along with the high performance toward the ORR and OER. It provides an efficient insight for the design of high-performance electrocatalysts for metal-oxygen batteries.

Enhanced Electromagnetic Wave-Absorbing Performance of Magnetic Nanoparticles-Anchored 2D Ti3C2Tx MXene

Two-dimensional Ti₃C₂T_x MXene-based hybrids-anchored magnetic metal nanoparticles show a huge potential application as effective wave absorbers due to the synergistic electromagnetic (EM) loss effect. In this work, uniform and size-controllable nickel, cobalt, or nickel-cobalt alloy nanoparticles were in situ grown on the surface of MXene via a facile and moderate co-solvothermal method for the first time. As an example, a nickel nanoparticles-anchored MXene (Ni@MXene) hybrid was homodispersed into dielectric polyvinylidene fluoride to develop its EM wave-absorbing capacity to a great extent. As expected, the results showed strong reflection loss (RL_min = -52.6 dB at 8.4 GHz), broad effective absorption bandwidth (EAB = 3.7 GHz including 71% of X-band), low loading (10 wt % Ni@MXene), and thin thickness (3.0 mm). By adjusting the sample thickness, EAB can cover completely the whole X-band with a maximum of 6.1 GHz, showing a huge potential of Ni@MXene hybrid applying as aircraft stealth coating. The mechanism analyses revealed that the excellent impedance matching, magnetocoupling effect, conductance, magnetic loss, and multiple scatterings contribute to the splendid EM wave-absorbing performance of the Ni@MXene hybrid. Considering the excellent overall performance, the Ni@MXene hybrid was identified as a promising candidate for EM wave absorption.