Density functional theory investigation on selective adsorption of VOCs on borophene

Study on co-amorphous emerging solubilization behavior after gelation during dissolution: The importance of complexation and anti-crystallization

Co-amorphous (CM) is a promising technology for enhancing the aqueous solubility of insoluble drugs, but the gelation phenomenon has often occurred during the dissolution process and seriously threatened their solubility/dissolution performance. Therefore, it's quite important to design favorable CM systems to alleviate or even avoid the adverse effects of gelation phenomenon. In this study, CM systems of taxifolin (TAX) and oxymatrine (OMT) (TAX-OMT CMs) were constructed to improve the solubility and dissolution properties of TAX. Interestingly, TAX-OMT CMs gradually aggregated and obviously gelled during dissolution, but the solubility and dissolution of TAX in TAX-OMT CMs were significantly enhanced compared to crystalline TAX. Consequently, the underlying solubilization mechanisms of TAX-OMT CMs after gelation were systematically explored. For one thing, the complexation between the two components in TAX-OMT CMs was verified by phase solubility, fluorescence spectroscopy and isothermal titration calorimetry. For another, the residual solids of TAX-OMT CMs after dissolution evaluation were thoroughly characterized by means of powder X-ray diffraction, fourier transform infrared spectroscopy, scanning electron microscopy, which showed the anti-crystallization property of TAX-OMT CMs. Furthermore, molecular simulation demonstrated the intermolecular interactions of TAX-OMT CMs alone and TAX-OMT complexes in aqueous solution. Finally, pharmacokinetics study in rats suggested that the bioavailability of TAX in TAX-OMT CM (1:2) was approximately 5.5-fold higher than that of crystalline TAX after oral administration. Collectively, this study reveals the importance of complexation and anti-crystallization effects of CM systems on maintaining solubilization behavior after gelation, providing an effective strategy to improve the absorption performance of pharmaceutical CM systems.

Co-adsorption enhancement of formaldehyde/carbon dioxide over modified hexagonal boron nitride for whole-surface capture purification

Simultaneous capture of formaldehyde (HCHO) and carbon dioxide (CO2) in indoor air is promising of achieving indoor-air purification. Of all potential adsorbents, hexagonal boron nitride (h-BN) is one of the most suitable species owing to facile formation of attraction points. Therefore, in this study, performances of HCHO and CO2 being adsorbed over pure/modified h-BN are systematically investigated via density functional theory (DFT) calculations. Minutely speaking, direct interaction between HCHO and CO2, single-point adsorption enhancement of HCHO over modified h-BN, co-adsorption reinforcement of HCHO/CO2 as well as relevant thermodynamic characteristics are major research contents. According to calculation results, there is relatively strong attraction between HCHO and CO2 owing to hydrogen bonds, which is in favor of co-adsorption of HCHO/CO2. As to single-adsorption of HCHO, C-doped h-BN shows better adsorption features than P-doped h-BN and C/P-doped h-BN is slightly weakened in adsorption ability due to surficial deformation caused by P atoms. For co-adsorption of HCHO/CO2, CO2 is the protagonist via formation of quasi-carbonate with the help of delocalized π-orbital electrons. Regarding effects of temperatures on adsorption strengths, they depend on interelectronic interactions among dopant atoms and finally derives from dispersion of π bonds across adsorbents. Overall, this study provides detailed mechanisms for co-capture of HCHO/CO2 to accomplish indoor-air purification.

A DFT Study of Volatile Organic Compounds Detection on Pristine and Pt-Decorated SnS Monolayers

Real-time monitoring of volatile organic compounds (VOCs) is crucial for both industrial production and daily life. However, the non-reactive nature of VOCs and their low concentrations pose a significant challenge for developing sensors. In this study, we investigated the adsorption behaviors of typical VOCs (C2H4, C2H6, and C6H6), on pristine and Pt-decorated SnS monolayers using density functional theory (DFT) calculations. Pristine SnS monolayers have limited charge transfer and long adsorption distances to VOC molecules, resulting in VOC insensitivity. The introduction of Pt atoms promotes charge transfer, creates new energy levels, and increases the overlap of the density of states, thereby enhancing electron excitation and improving gas sensitivity. Pt-decorated SnS monolayers exhibited high sensitivities of 241,921.7%, 35.7%, and 74.3% towards C2H4, C2H6, and C6H6, respectively. These values are 142,306.9, 23.8, and 82.6 times higher than those of pristine SnS monolayers, respectively. Moreover, the moderate adsorption energies of adsorbing C2H6 and C6H6 molecules ensure that Pt-decorated SnS monolayers possess good reversibility with a short recovery time at 298 K. When heated to 498 K, C2H4 molecules desorbs from the surface of Pt-decorated SnS monolayer in 162.33 s. Our results indicate that Pt-decorated SnS monolayers could be superior candidates for sensing VOCs with high selectivity, sensitivity, and reversibility.

Adsorption Features of Tetrahalomethanes (CX4; X = F, Cl, and Br) on β12 Borophene and Pristine Graphene Nanosheets: A Comparative DFT Study

The potentiality of the β₁₂ borophene (β₁₂) and pristine graphene (GN) nanosheets to adsorb tetrahalomethanes (CX₄; X = F, Cl, and Br) were investigated using density functional theory (DFT) methods. To provide a thorough understanding of the adsorption process, tetrel (XC-X₃∙∙∙β₁₂/GN)- and halogen (X₃C-X∙∙∙β₁₂/GN)-oriented configurations were characterized at various adsorption sites. According to the energetic manifestations, the adsorption process of the CX₄∙∙∙β₁₂/GN complexes within the tetrel-oriented configuration led to more desirable negative adsorption energy (E_ads) values than that within the halogen-oriented analogs. Numerically, E_ads values of the CBr₄∙∙∙Br1@β₁₂ and T@GN complexes within tetrel-/halogen-oriented configurations were -12.33/-8.91 and -10.03/-6.00 kcal/mol, respectively. Frontier molecular orbital (FMO) results exhibited changes in the E_HOMO, E_LUMO, and E_gap values of the pure β₁₂ and GN nanosheets following the adsorption of CX₄ molecules. Bader charge transfer findings outlined the electron-donating property for the CX₄ molecules after adsorbing on the β₁₂ and GN nanosheets within the two modeled configurations, except the adsorbed CBr₄ molecule on the GN sheet within the tetrel-oriented configuration. Following the adsorption process, new bands and peaks were observed in the band structure and density of state (DOS) plots, respectively, with a larger number in the case of the tetrel-oriented configuration than in the halogen-oriented one. According to the solvent effect affirmations, adsorption energies of the CX₄∙∙∙β₁₂/GN complexes increased in the presence of a water medium. The results of this study will serve as a focal point for experimentalists to better comprehend the adsorption behavior of β₁₂ and GN nanosheets toward small toxic molecules.

Toluene decomposition by non-thermal plasma assisted CoOx - γ-Al2O3: The relative contributions of specific energy input of plasma, Co3+ and oxygen vacancy

Cobalt oxide (CoO_x) is a common catalyst for plasma catalytic elimination of volatile organic compounds (VOCs). However, the catalytic mechanism of CoO_x under radiation of plasma is still unclear, such as how the relative importance of the intrinsic structure of the catalyst (e.g., Co³⁺ and oxygen vacancy) and the specific energy input (SEI) of the plasma for toluene decomposition performance. CoO_x - γ-Al₂O₃ catalysts were prepared and evaluated by toluene decomposition performance. Changing the calcination temperature of the catalyst altered the content of Co³⁺ and oxygen vacancies in CoO_x, resulting in different catalytic performance. The results of the artificial neural network (ANN) models presented that the relative importance of three reaction parameters (SEI, Co³⁺, and oxygen vacancy) on the mineralization rate and CO₂ selectivity were as follows: SEI > oxygen vacancy > Co³⁺ , and SEI > Co³⁺ > oxygen vacancy, respectively. Oxygen vacancy is essential for mineralization rate, and CO₂ selectivity is more dependent on Co³⁺ content. Furthermore, a possible reaction mechanism of toluene decomposition was proposed according to the analysis results of in-situ DRIFTS and PTR-TOF-MS. This work provides new ideas for the rational design of CoO_x catalysts in plasma catalytic systems.

Theoretical insights into dissociative-associative mechanism for enhanced electrochemical nitrate reduction to ammonia

The development of electrochemical nitrate reduction reaction (NO₃RR) is a "two birds-one stone" method, which can not only remove NO₃^- pollutant, but also produce valuable ammonia (NH₃). However, a mechanistic understanding of the nitrate reduction process remains very limited. Herein, we highlighted a dissociative-associative mechanism for the NO₃RR, in which the N-O bond of nitrate is initially broken to form *O and *NO₂ intermediate adsorbed on two active sites (dissociation process) and then subsequently hydrogenated and reduced to ammonia (association process). By taking a series of diatomic site catalysts (CuTM/g-CN and CuTM/N₆C, TM= Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn) as models, we systematically investigate the dissociative-associative mechanism for the NO₃RR and compared with the Cu-based single-atom catalysts which follows the traditional directly associative mechanism. Density functional theory (DFT) calculations show that dissociative-associative mechanism is energetically favorable on seven catalysts (CuTi/g-CN, CuV/g-CN, CuMn/g-CN, CuCo/g-CN, CuV/N₆C, CuCr/N₆C and CuFe/N₆C) with the significantly reduced limiting potential of - 0.14 V to - 0.47 V. Specifically, an efficiently screening strategy was proposed to determine the dissociative-associative or directly associative mechanism for NO₃RR. This work can provide useful guideline for the rational design and development of NO₃RR electrocatalysts.

Amorphous SnO2 decorated ZnSn(OH)6 promotes interfacial hydroxyl polarization for deep photocatalytic toluene mineralization

Surface hydroxyl groups play a decisive role in the generation of hydroxyl radicals with stronger oxidizing ability, which is indispensable in photocatalytic VOCs removal, especially under the condition of low humidity. In this work, non-noble amorphous SnO₂ decorated ZnSn(OH)₆ (ZSH) was synthesized by an in-situ method. The charge transport, reactant activation and hydroxyl polarization are enhanced through decoration of amorphous SnO₂ on ZSH. Combined with the designed experiment, in-situ EPR, DTF calculation and in-situ DRIFTS, the role and mechanism of interfacial hydroxyl polarization are revealed on SnO₂ decorated ZnSn(OH)₆. Compared with pristine ZSH and noble-metal modified ZSH, the toluene degradation rate of amorphous SnO₂ decorated ZSH is increased by 13.0 and 3.8 times, and the toluene mineralization rate is increased by 5.2 and 2.2 times. The ZSH-24 sample maintains a high toluene degradation activity after 6 cyclic utilization without catalyst deactivation. This work emphasizes the role of non-noble metal and the origin of hydroxyl group polarization on ZnSn(OH)₆ for photocatalytic VOCs mineralization.

Computational study on persulfate activation by two-dimensional carbon materials with various nitrogen proportions for carbamazepine oxidation in wastewater: The essential role of graphitic N atoms

Two-dimensional carbon materials with various N atom proportions (2D-CNMs) are constructed to clarify the optimal catalyst for carbamazepine (CBZ) oxidation and the inner mechanism for persulfate-based advanced oxidation processes (P-AOPs). Results show that peroxydisulfate (PDS) can be activated by all 2D-CNMs with the order of C₃N > C₇₁N > graphene > C₂N > CN, while C₃N is the only catalyst for peroxymonosulfate (PMS) activation. The C₃N with the maximum graphitic N can activate PDS and PMS in a wide temperature range at any pH, and demonstrates the optimal CBZ oxidation performance. Notably, the graphitic N atoms promote P-AOPs from five aspects: (i) electron structure, (ii) electrical conductivity, (iii) electron transfer from persulfate to catalysts, (iv) electron jump of co-system before and after activation, (v) interaction between catalyst and persulfate. The most vigorous activity of C₃N is attributed to the greatest number of graphitic N. This work clarifies the essential role of graphitic N atoms with implications for the catalyst design, and facilitates the environmental applications of P-AOPs for micropollutant abatement.

Isotherm models for adsorption of heavy metals from water - A review

Adsorption is a widely used technology for removing and separating heavy metal from water, attributed to its eco-friendly, cost-effective, and high efficiency. Adsorption isotherm modeling has been used for many years to predict the adsorption equilibrium mechanism, adsorption capacity, and the inherent characteristics of the adsorption process, all of which are substantial in evaluating the performance of adsorbents. This review summarizes the development history, fundamental characteristics, and mathematical derivations of various isotherm models, along with their applicable conditions and application scenarios in heavy metal adsorption. The latest progress in applying isotherm models with a one-parameter, two-parameter, and three-parameter in heavy metal adsorption using carbon-based materials, which has gained much attention in recent years as low-cost adsorbents, is critically reviewed and discussed. Several experimental factors affecting the adsorption equilibrium, such as solution pH, temperature, ionic strength, adsorbent dose, and initial heavy metal concentration, are briefly discussed. The criteria for selecting the optimum isotherm for heavy metal adsorption are proposed by comparing various adsorption models and analyzing mathematical error functions. Finally, the relative performance of different isotherm models for heavy metal adsorption is compared, and the future research gaps are identified.

Efficient electrocatalytic reduction of NO to ammonia on BC3 nanosheets

Searching for an economical and highly efficient electrocatalytic reduction catalyst for ammonia synthesis under controllable conditions is a very attractive and challenging subject in chemistry. In this study, we systematically studied the electrocatalytic performance of BC₃ nanosheets as potential NO reduction reaction (NORR) electrocatalysts using density functional theory (DFT) calculations. It was found that BC₃ two-dimensional (2D) materials exhibit excellent catalytic activity with a very low limiting potential of -0.29/-0.11 V along three reaction paths. The total reaction is NO (g)+5H⁺+5e^-→NH₃(g)+ H₂O. The density of states of adsorbed NO, NH_3, and the corresponding crystal orbital hamiltonian population (COHP) analysis revealed the mechanism of NO being activated and the reasons for NH₃ adsorption/desorption on the surface of BC₃. The reaction path, limiting potential, and Gibbs free energy calculations of BC₃ catalyzed NO to ammonia synthesis revealed that for path 1, the potential-determining step is *NO+H⁺+e^-→*NOH, and for path 2/3 the potential-determining step is *NO+(H⁺+e^-)→*HNO. Calculation of the thermodynamic energy barriers for NO dissociation at the BC₃ surface and NO hydrogenation reveals that NO is more likely to be hydrogenated rather than dissociated. The influences of the proton-electron hydrogenation site on the process of ammonia synthesis in the key reduction step were analyzed by Bader charge analysis and charge density, it is pointed out that the electronic structure and affects the reaction process can be controlled by hydrogenation at different sites of intermediates. These results pave the way for using nitrogen oxides not just nitrogen as raw materials for ammonia synthesis with 2D materials.

Borophene and Pristine Graphene 2D Sheets as Potential Surfaces for the Adsorption of Electron-Rich and Electron-Deficient π-Systems: A Comparative DFT Study

The versatility of striped borophene (sB), β12 borophene (β12), and pristine graphene (GN) to adsorb π-systems was comparatively assessed using benzene (BNZ) and hexafluorobenzene (HFB) as electron-rich and electron-deficient aromatic π-systems, respectively. Using the density functional theory (DFT) method, the adsorption process of the π-systems on the investigated 2D sheets in the parallel configuration was observed to have proceeded more favorably than those in the vertical configuration. According to the observations of the Bader charge transfer analysis, the π-system∙∙∙sB complexes were generally recorded with the largest contributions of charge transfer, followed by the π-system∙∙∙β12 and ∙∙∙GN complexes. The band structures of the pure sheets signaled the metallic and semiconductor characters of the sB/β12 and GN surfaces, respectively. In the parallel configuration, the adsorption of both BNZ and HFB showed more valence and conduction bands compared to the adsorption in the vertical configuration, revealing the prominent preferentiality of the anterior configuration. The density-of-states (DOSs) results also affirmed that the adsorption process of the BNZ and HFB on the surface of the investigated 2D sheets increased their electrical properties. In all instances, the sB and β12 surfaces demonstrated higher adsorptivity towards the BNZ and HFB than the GN analog. The findings of this work could make a significant contribution to the deep understanding of the adsorption behavior of aromatic π-systems toward 2D nanomaterials, leading, in turn, to their development of a wide range of applications.

Tunable band gaps and high carrier mobilities in stanene by small organic molecule adsorption under external electric fields

The effects of small organic molecule (SOM) adsorption with benzene (C6H6), hexafluorobenzene (C6F6), and p-difluorobenzene (C6H4F2) on the electronic properties of stanene under external electric fields are investigated through first-principles calculations. Different adsorption sites and molecular orientations are considered to determine the most stable configurations of small organic molecule (SOM) adsorption on the surface of stanene. The results show that the internal electric field caused by the adsorption of small organic molecules destroys the symmetry of the two sublattices of stanene in C6H6/stanene, C6F6/stanene and C6H4F2/stanene systems with the most stable configurations, opening the band gaps of stanene with 39.5, 18.9 and 14.5 meV, respectively. Under an external electric field, a wide range of linearly tunable and sizable direct band gaps (31.6-420.1 meV for the C6H6/stanene system, 14.8-587.2 meV for the C6F6/stanene system and 14.5-490.2 meV for the C6H4F2/stanene system) are merely determined by the strength of the composite electric field despite its direction. The mechanism of charge transfer between stanene and organic molecules under an external electric field can be revealed using an equivalent capacitor model to explain the tunable charge transfer. More importantly, the high carrier mobility of the stable SOM/stanene systems under an external electric field is largely retained due to the weak interactions at the interface. These results indicate that the electronic properties of stanene can be effectively modulated by the surface adsorption of organic molecules under an external electric field, providing effective and reversible routes to enhance the performance of stanene for novel electronic devices in the future.