Synthetic approaches for the incorporation of free amine functionalities in porous coordination polymers for enhanced CO2 sorption

Single Crystal to Single Crystal Transformation of Porous Materials Based on Zinc Nodes and Mercaptobenzoic Acid

Porous coordination polymers (PCPs) are an excellent class of porous crystalline materials with tunable properties and intriguing potential applications spanning multiple disciplines. In this work, we report the synthesis and characterization of a PCP (HI-103) based on 4,4'-dithiodibenzoic acid ligand and zinc nitrate with two DMF molecules residing in the porous network. The stability of the porous network was analyzed by heating the compound at 60.0 °C for two days, and the structural analysis revealed a new PCP (HI-104) was formed with one of the DMF molecules, indicating a single-crystal to single-crystal (SCSC) transformation. The solvent molecules were completely removed by extensive drying (HI-103-dry), and the integrity of the porous network was verified by powder X-ray diffraction (PXRD) and thermogravimetric analysis. The reversibility of SCSC transformation was confirmed by treating HI-103-dry with DMF molecules, resulting in HI-103 after five days. The adsorption studies of HI-103-dry with other solvents revealed that SCSC transformation was not observed for DMA and DEA, but some structural changes were observed in the presence of DMSO. The adsorption studies performed in the presence of an equimolar mixture of DMF, DMA, and DMA indicated that HI-103-dry could selectively adsorb DMF molecules from the analogous mixture.

Application of chiral recyclable catalysts in asymmetric catalysis

Chiral drugs hold a significant position within the contemporary pharmaceutical market, and the chiral catalysts play a crucial role in their synthesis. However, current chiral catalysts encounter challenges pertaining to their separation from products and the recycling process. The utilization of chiral recyclable catalysts not only reduces production costs but also aligns with the growing emphasis on environmentally-friendly chiral synthetic chemistry. These recyclable catalysts exhibit diverse carriers and distinct characteristics. Chemists employ the distinctive attributes of individual carriers to render them recyclable, thereby yielding time and cost savings. This review examines the asymmetric recyclable catalytic reactions reported between January 2017 and October 2023, categorizing them based on carrier solubility, and elucidates the loading techniques, catalytic impacts, recovery approaches, and recycling processes associated with these carriers.

Coordination Polymer Based on a Triangular Carboxylate Core {Fe(μ3-O)(μ-O2CR)6} and an Aliphatic Diamine

Interaction of the pre-organized complex of iron(II) trimethylacetate and 1,10-phenanthroline (phen) [Fe2(piv)4(phen)2] (1) (piv = (Me)3CCO2-)) with 1,6-diaminohexane (dahx) in anhydrous acetonitrile yielded a 1D coordination polymer [Fe3O(piv)6(dahx)1.5]n (2) and an organic salt of pivalic acid (H2dahx)(piv)2 (3). The structure of the obtained compounds was determined by single-crystal X-ray diffraction analysis. The phase purity of the complexes was determined by powder X-ray diffraction analysis. According to the single-crystal X-ray analysis, coordination polymer 2 is formed due to the binding of a triangular carboxylate core {Fe3(μ3-O)(μ-piv)6} with an aliphatic diamine ligand. Thermal behavior was investigated for compounds 1 and 2 in an argon atmosphere.

Amine Chemistry of Porous CO2 Adsorbents

ConspectusAs renewable energy and CO2 utilization technologies progress to make a more significant contribution to global emissions reduction, carbon capture remains a critical component of the mission. Current CO2 capture technologies involve operations at point sources such as fossil fuel-based power plants or source-agnostic like in direct air capture. Each strategy has its own advantages and limitations, but in common, they all employ sorption-based methods with the use of sorbents strongly adhering to CO2. Amine solutions are the most widely used absorbents for industrial operations due to the robust chemical bonds formed between amines and CO2 under both dry and humid conditions, rendering excellent selectivity. Such strong binding, however, causes problematic regeneration. In contrast, purely physisorptive porous materials with high surface areas allow for the confinement of CO2 inside narrow pores/channels and have a lower regeneration energy demand but with decreased selectivity and capacity. The most promising solution would then be the unification of both types of sorbents in one system, which could bring about a practical adsorption-desorption process. In other words, the development of porous solid materials with tunable amine content is necessary to leverage the high contact surface of porous sorbents with the added ability to manipulate amine incorporation toward lower CO2 binding strength.To answer the call to uncover the most feasible amine chemistry in carbon capture, our group has devoted intense effort to the study of amine-based CO2 adsorbents for the past decade. Oriented along practicality, we put forth a principle for the design of our materials to be produced in no more than three synthetic steps with economically viable starting materials. Porous organic polymers with amine functionalities of various substitutions, meaning primary, secondary, and tertiary amines, were synthesized and studied for CO2 adsorption. Direct synthesis proved to be feasibly applicable for secondary and tertiary amine-incorporated porous polymers whereas primary-amine-based sorbents would be conveniently obtained via postsynthetic modifications. Sorbents based on tertiary amines exhibit purely physical adsorption behavior if the nitrogen atoms are placed adjacent to aromatic cores due to the conjugation effect that reduces the electron density of the amine. However, when such conjugation is inhibited, chemisorptive activity is observed. Secondary amine adsorbents, in turn, express a higher binding strength than tertiary amine counterparts, but both types can merit a strengthened binding by the physical impregnation of small-molecule amines. Sorbents with primary-amine tethers can be obtained via postsynthetic transformation of precursor functionalities, and for them, chemical adsorption is mainly at work. We conclude that mixed-amine systems could exhibit unprecedented binding mechanisms, resulting in exceptionally specific interactions that would be useful for the development of highly selective sorbents for CO2.

Controlled alkali etching of MOFs with secondary building units for low-concentration CO2 capture

Low-concentration CO2 capture is particularly challenging because it requires highly selective adsorbents that can effectively capture CO2 from gas mixtures containing other components such as nitrogen and water vapor. In this study, we have successfully developed a series of controlled alkali-etched MOF-808-X (where X ranges from 0.04 to 0.10), the FT-IR and XPS characterizations revealed the presence of hydroxyl groups (-OH) on the zirconium clusters. Low-concentration CO2 capture experiments demonstrated improved CO2 capture performance of the MOF-808-X series compared to the pristine MOF-808 under dry conditions (400 ppm CO2). Among them, MOF-808-0.07 with abundant Zr-OH sites showed the highest CO2 capture capacity of 0.21 mmol g-1 under dry conditions, which is 70 times higher than that of pristine MOF-808. Additionally, MOF-808-0.07 exhibited fast adsorption kinetics, stable CO2 capture under humid air conditions (with a relative humidity of 30%), and stable regeneration even after 50 cycles of adsorption and desorption. In situ DRIFTS and 13C CP-MAS ssNMR characterizations revealed that the enhanced low-concentration CO2 capture is attributed to the formation of a stable six-membered ring structure through the interaction of intramolecular hydrogen bonds between neighboring Zr-OH sites via a chemisorption mechanism.

Porous Polymer Materials for CO2 Capture and Electrocatalytic Reduction

Efficient capture of CO₂ and its conversion into other high value-added compounds by electrochemical methods is an effective way to reduce excess CO₂ in the atmosphere. Porous polymeric materials hold great promise for selective adsorption and electrocatalytic reduction of CO₂ due to their high specific surface area, tunable porosity, structural diversity, and chemical stability. Here, we review recent research advances in this field, including design of porous organic polymers (POPs), porous coordination polymers (PCPs), covalent organic frameworks (COFs), and functional nitrogen-containing polymers for capture and electrocatalytic reduction of CO₂. In addition, key issues and prospects for the optimal design of porous polymers for future development are elucidated. This review is expected to shed new light on the development of advanced porous polymer electrocatalysts for efficient CO₂ reduction.

A charge-decorated porous framework with polar pores and open O donor sites for CO2/CH4 and C2H2/C2H4 separations

Developing efficient adsorbent materials towards energy gas purification, e.g. CO₂ removal from natural gas or hydrocarbon separation, is an important but extremely challenging task. Herein, taking advantage of a cationic bipyridinium ligand in competition with a multicarboxylate ligand for binding with metal ions, a porous material with open carboxylate oxygen atoms exposed on the pore surface has been demonstrated as an efficient adsorbent for gas separation. The polar environment arising from the cationic pyridinium moiety and the negative carboxylate group endows the title compound with selective affinity to CO₂ over CH₄. Moreover, the rich open O donor sites on the channel surface enable the resultant coordination polymer to selectively adsorb C₂H₂ over C₂H₄ through H-bonding interactions. The separation mechanism has been revealed by theoretical studies. This work provides a specific guidance for the design of applicable porous materials toward energy resource purification.

The crystal structure of catena-poly[aqua-2,2′bipyridine-κ2 N,N′-(μ2-5-ethoxyisophthalato-κ 4 O,O′:Oʺ,O′ʺ)cadmium(II)] monohydrate, C20H20CdN2O7

C20H20CdN2O7, monoclinic, P21/c (no. 14), a = 9.0154(3) Å, b = 17.7168(8) Å, c = 12.8449(5) Å, β = 98.537(4)°, V = 2028.91(14) Å3, Z = 4, R gt (F) = 0.0320, wR ref (F 2) = 0.0715, T = 288.32(10) K.

Cationic coordination polymers with thirteen-fold interpenetrating dia networks: selective coloration and ion-controlled photochromism

A novel Cd-based cationic coordination polymer (Cd-CCP) constructed using viologen derivatives, which exhibits an unusual thirteen-fold interpenetrating diamondoid network, has been synthesized. Notably, Cd-CCP displays selective and naked-eye distinguished coloration and ion-controlled photochromism towards halide anions.

Porous materials for carbon dioxide separations

Global investment in counteracting climate change has galvanized increasing interest in carbon capture and sequestration (CCS) as a versatile emissions mitigation technology. As decarbonization efforts accelerate, CCS can target the emissions of large point-source emitters, such as coal- or natural gas-fired power plants, while also supporting the production of renewable or low-carbon fuels. Furthermore, CCS can enable decarbonization of difficult-to-abate industrial processes and can support net CO₂ removal from the atmosphere through bioenergy coupled with CCS or direct air capture. Here we review the development of porous materials as next-generation sorbents for CO₂ capture applications. We focus on stream- and sector-specific challenges while highlighting case studies within the context of the rapidly shifting energy landscape. We conclude with a discussion of key needs from the materials community to expand deployment of carbon capture technologies.

Coordination sphere hydrogen bonding as a structural element in metal-organic Frameworks

In the design of new metal-organic frameworks, the constant challenges of framework stability and structural predictability continue to influence ligand choice in favour of well-studied dicarboxylates and similar ligands. However, a small subset of known MOF ligands contains suitable functionality for coordination sphere hydrogen bonding which can provide new opportunities in ligand design. Such interactions may serve to support and rigidity the coordination geometry of mononuclear coordination spheres, as well as providing extra thermodynamic and kinetic stabilisation to meet the challenge of hydrolytic stability in these materials. In this perspective, a collection of pyrazole, amine, amide and carboxylic acid containing species are examined through the lens of (primarily) inner-sphere hydrogen bonding. The influence of these interactions is then related to the overall structure, stability and function of these materials, to provide starting points for harnessing these interactions in future materials design.

Pore engineering of metal-organic frameworks for ethylene purification

Ethylene production is an important and direct indicator related to the development of the petrochemical industry in a country. However, the separation and purification of ethylene is an extremely energy-consuming process. In this review, the latest progress in the purification of ethylene using metal organic frameworks (MOFs), a new type of physical adsorbent, is summarized according to four classifications of pore engineering, including pore surface functionalization, molecular sieving, controlled framework softness and dynamic pore-dominated molecular diffusion. Finally, the current challenges and future prospects in this field are also discussed.

Dynamer and Metallodynamer Interconversion: An Alternative View to Metal Ion Complexation

A bifunctional molecule containing both a bidentate binding site for metal ions and an aminopyrimidine H-bond donor-acceptor site has been synthesized, and its properties, in its free and coordinated forms, have been established in solution and in the solid state by analytical and spectroscopic methods as well as by X-ray structure determinations. Structural characterization has shown that it forms a one-dimensional H-bonded polymeric assembly in the solid state, while spectroscopic measurements indicate that it also aggregates in solution. The reaction of a simple Fe(II) salt with this assembly results in the emergence of two geometrical isomers of the complex: [FeL₃](BF4)₂·9H₂O-C1 (meridional, mer) and [FeL₃]₂(SiF₆)(BF₄)₂·12H₂O-C2 (facial, fac). While, complex C1 in the solid state generates a one-dimensional H-bonded polymer involving just two ligands on each Fe center, with the chirality of the complex units alternating along the polymer chain, the structure of complex C2 shows NH···N interactions seen in both the ligand and mer complex (C1) structures to be completely absent. Physicochemical properties of the free and complexed ligand differ substantially.

Coordination polymers of a bis-isophthalate bridging ligand with single molecule magnet behaviour of the CoII analogue

A linear diamine-bisisophthalate bridging linker N,N'-bis(1,3-dicarboxyphenyl-5-methylene)-1,3-dimethylpropanediamine, designed to incorporate amine/ammonium functionalities in the core of the ligand, has been isolated as the pentahydrate of its dihydrochloride salt (H6L)Cl2·5H2O. Using this compound, four new coordination polymers have been formed, namely poly-[M(H2L)]·4.5H2O (1M, where M = Co, Zn, Cd) and poly-[Cd(H2L)(OH2)]·DMF·7H2O (2). Compounds 1M are isostructural 2D coordination polymers that contain 1D channels occupied by water molecules. In the case of 1Co these form a well ordered hydrogen-bonding network as determined by single crystal X-ray studies. Compound 2, synthesised under similar conditions, is a 1D coordination polymer in which the metal is partially solvated. DC and AC magnetic studies of 1Co, which posseses a mononuclear cobalt(ii) node, revealed single molecule magnet behaviour (SMM) with an effective barrier height Ueff of 37.7 K and τ0 = 1.02 × 10-9 s, among the highest reported for CoII coordination polymers.

Encapsulation of a Porous Organic Cage into the Pores of a Metal-Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient-wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO2 affinity were successfully encapsulated into the nanospace of Cr-based MIL-101 while retaining the crystal framework, morphology, and high stability of MIL-101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL-101, more affinity sites for CO2 are created in the resulting CB6@MIL-101 composites, leading to enhanced CO2 uptake capacity and CO2 /N2 , CO2 /CH4 separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.

An in situ approach to functionalize metal–organic frameworks with tertiary aliphatic amino groups

Tertiary aliphatic amino modified UiO-67/66(Zr), IRMOF-n(Zn) and MIL-101(Fe) were synthesized by a facile and efficient one-pot strategy under the corresponding metal catalysis.

A Cu/Zn heterometallic complex with solvent-binding cavity, catalytic activity for the oxidation of 1-phenylethanol and unusual magnetic properties

Mononuclear and polymeric complexes of zinc(ii) and copper(ii) have been synthesized using two isomers of the hemi-salen ligand with a different mutual orientation of donor atoms. The heterometallic Cu/Zn metallocycle features a catalytic niche filled with the molecule of water and molecules of methanol. This unusual compound exhibits both pronounced catalytic activity in the reaction of oxidation of a secondary alcohol to ketone and field induced slow magnetic relaxation, which is a very rare phenomenon among Cu(ii) complexes.

Sequential Co-immobilization of Enzymes in Metal-Organic Frameworks for Efficient Biocatalytic Conversion of Adsorbed CO2 to Formate

The main challenges in multienzymatic cascade reactions for CO₂ reduction are the low CO₂ solubility in water, the adjustment of substrate channeling, and the regeneration of co-factor. In this study, metal-organic frameworks (MOFs) were prepared as adsorbents for the storage of CO₂ and at the same time as solid supports for the sequential co-immobilization of multienzymes via a layer-by-layer self-assembly approach. Amine-functionalized MIL-101(Cr) was synthesized for the adsorption of CO₂. Using amine-MIL-101(Cr) as the core, two HKUST-1 layers were then fabricated for the immobilization of three enzymes chosen for the reduction of CO₂ to formate. Carbonic anhydrase was encapsulated in the inner HKUST-1 layer and hydrated the released CO₂ to HCO3-. Bicarbonate ions then migrated directly to the outer HKUST-1 shell containing formate dehydrogenase and were converted to formate. Glutamate dehydrogenase on the outer MOF layer achieved the regeneration of co-factor. Compared with free enzymes in solution using the bubbled CO₂ as substrate, the immobilized enzymes using stored CO₂ as substrate exhibited 13.1-times higher of formate production due to the enhanced substrate concentration. The sequential immobilization of enzymes also facilitated the channeling of substrate and eventually enabled higher catalytic efficiency with a co-factor-based formate yield of 179.8%. The immobilized enzymes showed good operational stability and reusability with a cofactor cumulative formate yield of 1077.7% after 10 cycles of reusing.

Challenges and opportunities for adsorption-based CO2 capture from natural gas combined cycle emissions

In recent years, the power sector has shown a growing reliance on natural gas, a cleaner-burning fuel than coal that emits approximately half as much CO2 per kWh of energy produced. This rapid growth in the consumption of natural gas has led to increased CO2 emissions from gas-fired power plants. To limit the contribution of fossil fuel combustion to atmospheric CO2 levels, carbon capture and sequestration has been proposed as a potential emission mitigation strategy. However, despite extensive exploration of solid adsorbents for CO2 capture, few studies have examined the performance of adsorbents in post-combustion capture processes specific to natural gas flue emissions. In this perspective, we emphasize the importance of considering gas-fired power plants alongside coal-fired plants in future analyses of carbon capture materials. We address specific challenges and opportunities related to adsorptive carbon capture from the emissions of gas-fired plants and discuss several promising candidate materials. Finally, we suggest experiments to determine the viability of new CO2 capture materials for this separation. This broadening in the scope of current carbon capture research is urgently needed to accelerate the deployment of transformational carbon capture technologies.