Manganese carbonyl complexes for CO2 reduction

Photochargeable Mn-Based Metal-Organic Framework and Decoupled Photocatalysis

Designing multifunctional materials that mimic the light-dark decoupling of natural photosynthesis is a key challenge in the field of energy conversion. Herein, we introduce MnBr-253, a precious metal-free metal-organic framework (MOF) built on Al nodes, bipyridine linkers and MnBr(CO)3(bipyridine) complexes. Upon irradiation, MnBr-253 colloids demonstrate an electron photocharging capacity of ~42 C ⋅ g-1 MOF, with state-of-the-art photocharging rate (1.28 C ⋅ s-1 ⋅ g-1 MOF) and incident photon-to-electron conversion efficiency of ~9.4 % at 450 nm. Spectroscopic and computational studies support effective electron accumulation at the Mn complex while high porosity and Mn loading account for the notable electron storage performance. The charged MnBr-253 powders were successfully applied for hydrogen evolution under dark conditions thus emulating the light-decoupled reactivity of photosynthesis.

Mechanistic insights of electrocatalytic CO2 reduction by Mn complexes: synergistic effects of the ligands

The electrocatalytic mechanisms of CO2 reduction catalyzed by pyridine-oxazoline (pyrox)-based Mn catalysts were investigated by DFT calculations. In-depth comparative analyses of pyrox-based and bipyridine-based Mn complexes were carried out. C-OH cleavage is the rate-determining step for both the protonation-first path and the reduction-first path. The free energy of CO2 activation (ΔG1) and the electrons donated by CO ligands in this step are effective descriptors in regulating the C-OH cleavage barrier. The reduction of carboxylate complex 6 (E6) is the potential-determining step for the reduction-first path. Meanwhile, for the protonation-first path, the initial generation (E2) or the regeneration (E8) of active catalyst might be potential-determining. Hirshfeld charge and orbital contribution analysis indicate that E6 is definitely based on the heterocyclic ligand and E2 is related to both the heterocyclic ligand and three CO ligands. Therefore, replacement of the CO ligand by a stronger electron donating ligand can effectively boost the catalytic activity of CO2 reduction without increasing the overpotential in the reduction-first path. This hypothesis is supported by the mechanism calculations of the Mn complex in which the axial CO ligand is replaced by a pyridine or PMe3.

Cobalt-based tripodal complexes as molecular catalysts for photocatalytic CO2 reduction

Construction of artificial photosynthetic systems including CO2 reduction is a promising pathway to produce carbon-neutral fuels and mitigate the greenhouse effect concurrently. However, the exploitation of earth-abundant catalysts for photocatalytic CO2 reduction remains a fundamental challenge, which can be assisted by a systematic summary focusing on a specific catalyst family. Cobalt-based complexes featuring tripodal ligands should merit more insightful discussion and summarization, as they are one of the most examined catalyst families for CO2 photoreduction. In this feature article, the key developments of cobalt-based tripodal complexes as molecular catalysts for light-driven CO2 reduction are discussed to offer an upcoming perspective, analyzing the present progress in electronic/steric tuning through ligand modification and dinuclear design to achieve a synergistic effect, as well as the bottlenecks for further development.

Activation of robust bonds by carbonyl complexes of Mn, Fe and Co

Metal carbonyl complexes possess among the most storied histories of any compound class in organometallic chemistry. Nonetheless, these old dogs continue to be taught new tricks. In this Feature, we review the historic discoveries and recent advances in cleaving robust bonds (e.g., C-H, C-O, C-F) using carbonyl complexes of three metals: Mn, Fe, and Co. The use of Mn, Fe, and Co carbonyl catalysts in controlling selectivity during hydrofunctionalization reactions is also discussed. The chemistry of these earth-abundant metals in the field of robust bond functionalization is particularly relevant in the context of sustainability. We expect that an up-to-date perspective on these seemingly simple organometallic species will emphasize the wellspring of reactivity that continues to be available for discovery.

Studying manganese carbonyl photochemistry in a permanently porous metal-organic framework

Mn(diimine)(CO)3X (X = halide) complexes are critical components of chromophores, photo- and electrocatalysts, and photoactive CO-releasing molecules (photoCORMs). While these entities have been incorporated into metal-organic frameworks (MOFs), a detailed understanding of the photochemical and chemical processes that occur in a permanently porous support is lacking. Here we site-isolate and study the photochemistry of a Mn(diimine)(CO)3Br moiety anchored within a permanently porous MOF support, allowing for not only the photo-liberation of CO from the metal but also its escape from the MOF crystals. In addition, the high crystallinity and structural flexibility of the MOF allows crystallographic snapshots of the photolysis products to be obtained. We report these photo-crystallographic studies in the presence of coordinating solvents, THF and acetonitrile, showing the changing coordination environment of the Mn species as CO loss proceeds. Using time resolved experiments, we report complementary spectroscopic studies of the photolysis chemistry and characterize the final photolysis product as a possible Mn(ii) entity. These studies inform the chemistry that occurs in MOF-based photoCORMs and where these moieties are employed as catalysts.

Plight of CORMs: The unreliability of four commercially available CO-releasing molecules, CORM-2, CORM-3, CORM-A1, and CORM-401, in studying CO biology

Carbon monoxide (CO) is an endogenously produced gaseous signaling molecule with demonstrated pharmacological effects. In studying CO biology, three delivery forms have been used: CO gas, CO in solution, and CO donors of various types. Among the CO donors, four carbonyl complexes with either a transition metal ion or borane (BH3) (termed CO-releasing molecules or CORMs) have played the most prominent roles appearing in over 650 publications. These are CORM-2, CORM-3, CORM-A1, and CORM-401. Intriguingly, there have been unique biology findings that were only observed with these CORMs, but not CO gas; yet these properties were often attributed to CO, raising puzzling questions as to why CO source would make such a fundamental difference in terms of CO biology. Recent years have seen a large number of reports of chemical reactivity (e.g., catalase-like activity, reaction with thiol, and reduction of NAD(P)+) and demonstrated CO-independent biological activity for these four CORMs. Further, CORM-A1 releases CO in an idiosyncratic fashion; CO release from CORM-401 is strongly influenced or even dependent on reaction with an oxidant and/or a nucleophile; CORM-2 mostly releases CO2, not CO, after a water-gas shift reaction except in the presence of a strong nucleophile; and CORM-3 does not release CO except in the presence of a strong nucleophile. All these beg the question as to what constitutes an appropriate CO donor for studying CO biology. This review critically summarizes literature findings related to these aspects, with the aim of helping result interpretation when using these CORMs and development of essential criteria for an appropriate donor for studying CO biology.

Mechanistic insights into CO2 conversion to CO using cyano manganese complexes

Without the use of a photosensitizer, [Mn(bpy)(CO)₃(CN)] (MnCN) can photochemically form [Mn(bpy)(CO)₃]^-, the active species for CO₂ reduction. While cases of the axial X-ligand dissociating upon irradiation of fac-[M(N-N)(CO)₃X] complexes (M = Mn or Re; N-N = bipyridine (bpy) ligand; X = halogen or pseudohalogen) are well documented, the axial cyanide ligand is retained when either [Mn(bpy)(CO)₃(CN)] or [Mn(mesbpy)(CO)₃(CN)], MnCN(mesbpy), are irradiated anaerobically. Infrared and UV-vis spectroscopies indicate the formation of [Mn(bpy)(CO)₂(MeCN)(CN)] (s-MnCN) as the primary product during the irradiation of MnCN. An in-depth analysis of the photochemical mechanism for the formation of [Mn(bpy)(CO)₃]^- from MnCN is presented. MnCN(mesbpy) is too sterically hindered to undergo the same photochemical mechanism as MnCN. However, MnCN(mesbpy) is found to be electrocatalytically active for CO₂ reduction to CO. Thus providing an interesting distinction between photochemical and electrochemical charge transfer.

Exploring the Parameters Controlling Product Selectivity in Electrochemical CO2 Reduction in Competition with Hydrogen Evolution Employing Manganese Bipyridine Complexes

Selective reduction of CO₂ is an efficient solution for producing nonfossil-based chemical feedstocks and simultaneously alleviating the increasing atmospheric concentration of this greenhouse gas. With this aim, molecular electrocatalysts are being extensively studied, although selectivity remains an issue. In this work, a combined experimental-computational study explores how the molecular structure of Mn-based complexes determines the dominant product in the reduction of CO₂ to HCOOH, CO, and H₂. In contrast to previous Mn(bpy-R)(CO)₃Br catalysts containing alkyl amines in the vicinity of the Br ligand, here, we report that bpy-based macrocycles locking these amines at the side opposite to the Br ligand change the product selectivity from HCOOH to H₂. Ab initio molecular dynamics simulations of the active species showed that free rotation of the Mn(CO)₃ moiety allows for the approach of the protonated amine to the reactive center yielding a Mn-hydride intermediate, which is the key in the formation of H₂ and HCOOH. Additional studies with DFT methods showed that the macrocyclic moiety hinders the insertion of CO₂ to the metal hydride favoring the formation of H₂ over HCOOH. Further, our results suggest that the minor CO product observed experimentally is formed when CO₂ adds to Mn on the side opposite to the amine ligand before protonation. These results show how product selectivity can be modulated by ligand design in Mn-based catalysts, providing atomistic details that can be leveraged in the development of a fully selective system.

Steric and Lewis Basicity Influence of the Second Coordination Sphere on Electrocatalytic CO2 Reduction by Manganese Bipyridyl Complexes

This study aims to provide a greater insight into the balance between steric (bpy vs (Ph)₂bpy vs mes₂bpy ligands) and Lewis basic ((Ph)₂bpy vs (MeOPh)₂bpy vs (MeSPh)₂bpy ligands) influence on the efficiencies of the protonation-first vs reduction-first CO₂ reduction mechanisms with [Mn^I(R₂bpy)(CO)₃(CH₃CN)]⁺ precatalysts, and on their respective transition-state geometries/energies for rate-determining C-OH bond cleavage toward CO evolution. The presence of only modest steric bulk at the 6,6'-diphenyl-2,2'-bipyridyl ((Ph)₂bpy) ligand has here allowed unique insight into the mechanism of catalyst activation and CO₂ binding by navigating a perfect medium between the nonsterically encumbered bpy-based and the highly sterically encumbered mes₂bpy-based precatalysts. Cyclic voltammetry conducted in CO₂-saturated electrolyte for the (Ph)₂bpy-based precatalyst [2-CH₃CN]⁺ confirms that CO₂ binding occurs at the two-electron-reduced activated catalyst [2]^- in the absence of an excess proton source, in contrast to prior assumptions that all manganese catalysts require a strong acid for CO₂ binding. This observation is supported by computed free energies of the parent-child reaction for [Mn-Mn]⁰ dimer formation, where increased steric hindrance relative to the bpy-based precatalyst correlates with favorable CO₂ binding. A critical balance must be adhered to, however, as the absence of steric bulk in the bpy-based precatalyst [1-CH₃CN]⁺ maintains a lower overpotential than [2-CH₃CN]⁺ at the protonation-first pathway with comparable kinetic performance, whereas an ∼2-fold greater TOF_max is observed at its reduction-first pathway with an almost identical overpotential as [2-CH₃CN]⁺. Notably, excessive steric bulk in the mes₂bpy-based precatalyst [3-CH₃CN]⁺ results in increased activation free energies of the C-OH bond cleavage transition states for both the protonation-first and the reduction-first pathways relative to both [1-CH₃CN]⁺ and [2-CH₃CN]⁺. In fact, [3-CH₃CN]⁺ requires a 1 V window beyond its onset potential to reach its peak catalytic current, which is in contrast to the narrower (<0.30 V) potential response window of the remaining catalysts here studied. Voltammetry recorded under 1 atm of CO₂ with 2.8 M (5%) H₂O establishes [2-CH₃CN]⁺ to have the lowest overpotential (η = 0.75 V) in the series here studied, attributed to its ability to lie "on the fence" when providing sufficient steric bulk to hinder (but not prevent) [Mn-Mn]⁰ dimerization, while simultaneously having a limited steric impact on the free energy of activation for the rate-determining C-OH bond cleavage transition state. While the methoxyphenyl bpy-based precatalyst [4-CH₃CN]⁺ possesses an increased steric presence relative to [2-CH₃CN]⁺, this is offset by its capacity to stabilize the C-OH bond cleavage transition states of both the protonation-first and the reduction-first pathways by facilitating second coordination sphere H-bonding stabilization.

Exploring the Electrochemistry of Iron Dithiolene and Its Potential for Electrochemical Homogeneous Carbon Dioxide Reduction

In this work, the dithiolene complex iron(III) bis-maleonitriledithiolene [Fe(mnt)2] is characterised and evaluated as a homogeneous CO2 reduction catalyst. Electrochemically the Fe(mnt)2 is reduced twice to the trianionic Fe(mnt)2 3- state, which is correspondingly found to be active towards CO2. Interestingly, the first reduction event appears to comprise overlapping reversible couples, attributed to the presence of both a dimeric and monomeric form of the dithiolene complex. In acetonitrile Fe(mnt)2 demonstrates a catalytic response to CO2 yielding typical two-electron reduction products: H2, CO and CHOOH. The product distribution and yield were governed by the proton source. Operating with H2O as the proton source gave only H2 and CO as products, whereas using 2,2,2-trifluoroethanol gave 38 % CHOOH faradaic efficiency with H2 and CO as minor products.

Bioimaging agents based on redox-active transition metal complexes

Detecting the fluctuation and distribution of various bioactive species in biological systems is of great importance in determining diseases at their early stages. Metal complex-based probes have attracted considerable attention in bioimaging applications owing to their unique advantages, such as high luminescence, good photostability, large Stokes shifts, low toxicity, and good biocompatibility. In this review, we summarized the development of redox-active transition metal complex-based probes in recent five years with the metal ions of iron, manganese, and copper, which play essential roles in life and can avoid the introduction of exogenous metals into biological systems. The designing principles that afford these complexes with optical or magnetic resonance (MR) imaging properties are elucidated. The applications of the complexes for bioimaging applications of different bioactive species are demonstrated. The current challenges and potential future directions of these probes for applications in biological systems are also discussed.

Photocatalytic Reduction of CO2 to CO in Aqueous Solution under Red-Light Irradiation by a Zn-Porphyrin-Sensitized Mn(I) Catalyst

This work demonstrates photocatalytic CO₂ reduction by a noble-metal-free photosensitizer-catalyst system in aqueous solution under red-light irradiation. A water-soluble Mn(I) tricarbonyl diimine complex, [MnBr(4,4′-{Et₂O₃PCH₂}₂-2,2′-bipyridyl)(CO)₃] (1), has been fully characterized, including single-crystal X-ray crystallography, and shown to reduce CO₂ to CO following photosensitization by tetra(N-methyl-4-pyridyl)porphyrin Zn(II) tetrachloride [Zn(TMPyP)]Cl₄ (2) under 625 nm irradiation. This is the first example of 2 employed as a photosensitizer for CO₂ reduction. The incorporation of −P(O)(OEt)₂ groups, decoupled from the core of the catalyst by a −CH₂– spacer, afforded water solubility without compromising the electronic properties of the catalyst. The photostability of the active Mn(I) catalyst over prolonged periods of irradiation with red light was confirmed by ¹H and ¹³C{¹H} NMR spectroscopy. This first report on Mn(I) species as a homogeneous photocatalyst, working in water and under red light, illustrates further future prospects of intrinsically photounstable Mn(I) complexes as solar-driven catalysts in an aqueous environment.

A Mn(I) bipyridyl tricarbonyl complex, where the diimine ligand is functionalized with water-solubilizing phosphonate ester groups, has been prepared and is shown to catalytically convert CO₂ to CO in aqueous solution following photosensitization from a water-soluble Zn(II) porphyrin under red-light irradiation.

Mn(II) sub-nanometric site stabilization in noble, N-doped carbonaceous materials for electrochemical CO2 reduction

The preparation of stable and efficient electrocatalysts comprising abundant and non-critical row-materials is of paramount importance for their industrial implementation. Herein, we present a simple synthetic route to prepare Mn(II) sub-nanometric active sites over a highly N-doped noble carbonaceous support. This support not only promotes a strong stabilization of the Mn(II) sites, improving its stability against oxidation, but also provides a convenient coordination environment in the Mn(II) sites able to produce CO, HCOOH and CH₃COOH from electrochemical CO₂ reduction.

Manganese Carbonyl Complexes as Selective Electrocatalysts for CO2 Reduction in Water and Organic Solvents

The electrochemical reduction of CO₂ provides a way to sustainably generate carbon-based fuels and feedstocks. Molecular CO₂ reduction electrocatalysts provide tunable reaction centers offering an approach to control the selectivity of catalysis. Manganese carbonyl complexes, based on [Mn(bpy)(CO)₃Br] and its derivatives (bpy = 2,2′-bipyridine), are particularly interesting due to their ease of synthesis and the use of a first-row earth-abundant transition metal. [Mn(bpy)(CO)₃Br] was first shown to be an active and selective catalyst for reducing CO₂ to CO in organic solvents in 2011. Since then, manganese carbonyl catalysts have been widely studied with numerous reports of their use as electrocatalysts and photocatalysts and studies of their mechanism.

This class of Mn catalysts only shows CO₂ reduction activity with the addition of weak Brønsted acids. Perhaps surprisingly, early reports showed increased turnover frequencies as the acid strength is increased without a loss in selectivity toward CO evolution. It may have been expected that the competing hydrogen evolution reaction could have led to lower selectivity. Inspired by these works we began to explore if the catalyst would work in protic solvents, namely, water, and to explore the pH range over which it can operate. Here we describe the early studies from our laboratory that first demonstrated the use of manganese carbonyl complexes in water and then go on to discuss wider developments on the use of these catalysts in water, highlighting their potential as catalysts for use in aqueous CO₂ electrolyzers.

Key to the excellent selectivity of these catalysts in the presence of Brønsted acids is a proton-assisted CO₂ binding mechanism, where for the acids widely studied, lower pK_a values actually favor CO₂ binding over Mn–H formation, a precursor to H₂ evolution. Here we discuss the wider literature before focusing on our own contributions in validating this previously proposed mechanism through the use of vibrational sum frequency generation (VSFG) spectroelectrochemistry. This allowed us to study [Mn(bpy)(CO)₃Br] while it is at, or near, the electrode surface, which provided a way to identify new catalytic intermediates and also confirm that proton-assisted CO₂ binding operates in both the “dimer” and primary (via [Mn(bpy)(CO)₃]⁻) pathways. Understanding the mechanism of how these highly selective catalysts operate is important as we propose that the Mn complexes will be valuable models to guide the development of new proton/acid tolerant CO₂ reduction catalysts.

Nitrogen–nitrogen-functionalized N-heterocyclic carbene ruthenium(ii) complexes realized efficient CO2 hydrogenation to formate

Three new Ru–CNN complexes are synthesized for the hydrogenation of CO2 to formate. The Ru–CNN complex exhibits a long lifetime of over 400 h at 170 °C with a high TON of 6.5 × 105.

Promoting Selective Generation of Formic Acid from CO2 Using Mn(bpy)(CO)3Br as Electrocatalyst and Triethylamine/Isopropanol as Additives

Urgent solutions are needed to efficiently convert the greenhouse gas CO₂ into higher-value products. In this work, fac-Mn(bpy)(CO)₃Br (bpy = 2,2'-bipyridine) is employed as electrocatalyst in reductive CO₂ conversion. It is shown that product selectivity can be shifted from CO toward HCOOH using appropriate additives, i.e., Et₃N along with iPrOH. A crucial aspect of the strategy is to outrun the dimer-generating parent-child reaction involving fac-Mn(bpy)(CO)₃Br and [Mn(bpy)(CO)₃]^- and instead produce the Mn hydride intermediate. Preferentially, this is done at the first reduction wave to enable formation of HCOOH at an overpotential as low as 260 mV and with faradaic efficiency of 59 ± 1%. The latter may be increased to 71 ± 3% at an overpotential of 560 mV, using 2 M concentrations of both Et₃N and iPrOH. The nature of the amine additive is crucial for product selectivity, as the faradaic efficiency for HCOOH formation decreases to 13 ± 4% if Et₃N is replaced with Et₂NH. The origin of this difference lies in the ability of Et₃N/iPrOH to establish an equilibrium solution of isopropyl carbonate and CO₂, while with Et₂NH/iPrOH, formation of the diethylcarbamic acid is favored. According to density-functional theory calculations, CO₂ in the former case can take part favorably in the catalytic cycle, while this is less opportune in the latter case because of the CO₂-to-carbamic acid conversion. This work presents a straightforward procedure for electrochemical reduction of CO₂ to HCOOH by combining an easily synthesized manganese catalyst with commercially available additives.

A "one pot" mass spectrometry technique for characterizing solution- and gas-phase photochemical reactions by electrospray mass spectrometry

The characterization of new photochemical pathways is important to progress the understanding of emerging areas of light-triggered inorganic and organic chemistry. In this context, the development of platforms to perform routine characterization of photochemical reactions remains an important goal for photochemists. Here, we demonstrate a new instrument that can be used to characterise both solution-phase and gas-phase photochemical reactions through electrospray ionisation mass spectrometry (ESI-MS). The gas-phase photochemistry is studied by novel laser-interfaced mass spectrometry (LIMS), where the molecular species of interest is introduced to the gas-phase by ESI, mass-selected and then subjected to laser photodissociation in the ion-trap. On-line solution-phase photochemistry is initiated by LEDs prior to ESI-MS in the same instrument with ESI-MS again being used to monitor photoproducts. Two ruthenium metal carbonyls, [Ru(η5-C5H5)(PPh3)2CO][PF6] and [Ru(η5-C5H5)(dppe)CO][PF6] (dppe = 1,2-bis(diphenylphosphino)ethane) are studied using this methodology. We show that the gas-phase photofragmentation pathways observed for the ruthenium complexes via LIMS (i.e. loss of CO + PPh3 ligands from [Ru(η5-C5H5)(PPh3)2CO]+ and loss of just CO from [Ru(η5-C5H5)(dppe)CO]+) mirror the solution-phase photochemistry at 3.4 eV. The advantages of performing the gas-phase and solution-phase photochemical characterisations in a single instrument are discussed.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Molecular Catalysts with Intramolecular Re-O Bond for Electrochemical Reduction of Carbon Dioxide

A new Re bipyridine-type complex, namely, fac-Re(pmbpy)(CO)₃Cl (pmbpy = 4-phenyl-6-(2-hydroxy-phenyl)-2,2′-bipyridine), 1, carrying a single OH moiety as local proton source, has been synthesized, and its electrochemical behavior under Ar and under CO₂ has been characterized. Two isomers of 1, namely, 1-cis characterized by the proximity of Cl to OH and 1-trans, are identified. The interconversion between 1-cis and 1-trans is clarified by DFT calculations, which reveal two transition states. The energetically lower pathway displays a non-negligible barrier of 75.5 kJ mol^–1. The 1e^– electrochemical reduction of 1 affords the neutral intermediate 1-OPh, formally derived by reductive deprotonation and loss of Cl^– from 1. 1-OPh, which exhibits an entropically favored intramolecular Re–O bond, has been isolated and characterized. The detailed electrochemical mechanism is demonstrated by combined chemical reactivity, spectroelectrochemistry, spectroscopic (IR and NMR), and computational (DFT) approaches. Comparison with previous Re and Mn derivatives carrying local proton sources highlights that the catalytic activity of Re complexes is more sensitive to the presence of local OH groups. Similar to Re-2OH (2OH = 4-phenyl-6-(phenyl-2,6-diol)-2,2′-bipyridine), 1 and Mn-1OH display a selective reduction of CO₂ to CO. In the case of the Re bipyridine-type complex, the formation of a relatively stable Re–O bond and a preference for phenolate-based reactivity with CO₂ slightly inhibit the electrocatalytic reduction of CO₂ to CO, resulting in a low TON value of 9, even in the presence of phenol as a proton source.

A new Re bipyridine-type complex, namely, fac-Re(pmbpy)(CO)₃Cl (pmbpy = 4-phenyl-6-(2-hydroxy-phenyl)-2,2′-bipyridine), 1, carrying a single OH moiety as local proton source, has been synthesized, and its electrochemical behavior under Ar and under CO₂ has been characterized. Two isomers of 1, namely, 1-cis characterized by the proximity of Cl to OH and 1-trans, are identified.

Covalent Organic Frameworks: A Promising Materials Platform for Photocatalytic CO2 Reductions

Covalent organic frameworks (COFs) are a kind of porous crystalline polymeric material. They are constructed by organic module units connected with strong covalent bonds extending in two or three dimensions. COFs possess the advantages of low-density, large specific surface area, high thermal stability, developed pore-structure, long-range order, good crystallinity, and the excellent tunability of the monomer units and the linking reticular chemistry. These features endowed COFs with the ability to be applied in a plethora of applications, ranging from adsorption and separation, sensing, catalysis, optoelectronics, energy storage, mass transport, etc. In this paper, we will review the recent progress of COFs materials applied in photocatalytic CO₂ reduction. The state-of-the-art paragon examples and the current challenges will be discussed in detail. The future direction in this research field will be finally outlooked.

Manganese Telluride Carbonyl Complexes: Facile Syntheses and Exotic Properties-Reversible Transformations, Hydrogen Generation, Paramagnetic, and Semiconducting Properties

A novel family of five Mn-Te-CO complexes was prepared via facile syntheses: mono spirocyclic [Mn₄Te(CO)₁₆]^2- (1), four-membered Mn₂Te₂ ring-type [Mn₂Te₂(CO)₈]^2- (2), hydride-containing square pyramidal [HMn₃Te₂(CO)₉]^2- (3), and dumbbell-shaped [Mn₆Te₆(CO)₁₈]^4- (4) and [Mn₆Te₁₀(CO)₁₈]^4- (5). Electron-precise complexes 4 and 5 exhibit unusual paramagnetism arising from two types of Mn atoms in different oxidation states, as determined by X-ray photoelectron spectroscopy, electron paramagnetic resonance, and density functional theory (DFT) calculations. The structural transformations from small-sized Mn₄Te 1 and Mn₂Te₂ 2 to the largest Mn₆Te₁₀ 5 were controllable, the off/on magnetic-switched transformation between HMn₃Te₂ 3 and 5 was reversible, and the magnetic transformation between Mn₆Te₆ 4 and 5 was observed. Interestingly, the reversible dehydridation and hydridation between the HMn₃Te₂-based cluster 3 and [Mn₃Te₂(CO)₉]^- were successfully accomplished, in which the release of a high yield of H₂ was detected by gas chromatography. In addition, upon the addition of CO, cluster 3 first forms a carbonyl-inserted intermediate [HMn₃Te₂(CO)₁₀]^2- (3'), detected by the high resolution ESI-MS, which is readily transformed to a dimeric dihydrido cluster [{HMn₃Te₂(CO)₁₀}₂]^2- (6) with the introduction of O₂. These low- to high-nuclearity complexes exhibit rich redox properties with semiconducting behavior in solids, possessing low but tunable energy gaps (1.06-1.62 eV) due to efficient electron transport via nonclassical C-H···O(carbonyl) interactions. The structural nature, reversible structural transformations, controllable on/off magnetic switches, electron communication networks, and associated chemical properties for hydrogen generation are discussed in detail and supported by DFT calculations, density of states, band structures, and noncovalent interaction analyses.

Strong Impact of Intramolecular Hydrogen Bonding on the Cathodic Path of [Re(3,3'-dihydroxy-2,2'-bipyridine)(CO)3Cl] and Catalytic Reduction of Carbon Dioxide

Herein, we present the cathodic paths of the Group-7 metal complex [Re(3,3'-DHBPY)(CO)₃Cl] (3,3'-DHBPY = 3,3'-dihydroxy-2,2'-bipyridine) producing a moderately active catalyst of electrochemical reduction of CO₂ to CO. The combined techniques of cyclic voltammetry and IR/UV-vis spectroelectrochemistry have revealed significant differences in the chemistry of the electrochemically reduced parent complex compared to the previously published Re/4,4'-DHBPY congener. The initial irreversible cathodic step in weakly coordinating THF is shifted toward much less negative electrode potentials, reflecting facile reductive deprotonation of one hydroxyl group and strong intramolecular hydrogen bonding, O-H···O^-. The latter process occurs spontaneously in basic dimethylformamide where Re/4,4'-DHBPY remains stable. The subsequent reduction of singly deprotonated [Re(3,3'-DHBPY-H⁺)(CO)₃Cl]^- under ambient conditions occurs at a cathodic potential close to that of the Re/4,4'-DHBPY-H⁺ derivative. However, for the stabilized 3,3'-DHBPY-H⁺ ligand, the latter process at the second cathodic wave is more complex and involves an overall transfer of three electrons. Rapid potential step electrolysis induces 1e^--reductive cleavage of the second O-H bond, triggering dissociation of the Cl^- ligand from [Re(3,3'-DHBPY-2H⁺)(CO)₃Cl]^2-. The ultimate product of the second cathodic step in THF was identified as 5-coordinate [Re(3,3'-DHBPY-2H⁺)(CO)₃]^3-, the equivalent of classical 2e^--reduced [Re(BPY)(CO)₃]^-. Each reductive deprotonation of the DHBPY ligand results in a redshift of the IR ν(CO) absorption of the tricarbonyl complexes by ca. 10 cm^-1, facilitating the product assignment based on comparison with the literature data for corresponding Re/BPY complexes. The Cl^- dissociation from [Re(3,3'-DHBPY-2H⁺)(CO)₃Cl]^2- was proven in strongly coordinating butyronitrile. The latter dianion is stable at 223 K, converting at 258 K to 6-coordinate [Re(3,3'-DHBPY-2H⁺)(CO)₃(PrCN)]^3-. Useful reference data were obtained with substituted parent [Re(3,3'-DHBPY)(CO)₃(PrCN)]⁺ that also smoothly deprotonates by the initial reduction to [Re(3,3'-DHBPY-H⁺)(CO)₃(PrCN)]. The latter complex ultimately converts at the second cathodic wave to [Re(3,3'-DHBPY-2H⁺)(CO)₃(PrCN)]^3- via a counterintuitive ETC step generating the 1e^- radical of the parent complex, viz., [Re(3,3'-DHBPY)(CO)₃(PrCN)]. The same alternative reduction path is also followed by [Re(3,3'-DHBPY-H⁺)(CO)₃Cl]^- at the onset of the second cathodic wave, where the ETC step results in the intermediate [Re(3,3'-DHBPY)(CO)₃Cl]^•- further reducible to [Re(3,3'-DHBPY-2H⁺)(CO)₃]^3- as the CO₂ catalyst.

Ligand-Controlled Product Selectivity in Electrochemical Carbon Dioxide Reduction Using Manganese Bipyridine Catalysts

Electrocatalysis is a promising tool for utilizing carbon dioxide as a feedstock in the chemical industry. However, controlling the selectivity for different CO₂ reduction products remains a major challenge. We report a series of manganese carbonyl complexes with elaborated bipyridine or phenanthroline ligands that can reduce CO₂ to either formic acid, if the ligand structure contains strategically positioned tertiary amines, or CO, if the amine groups are absent in the ligand or are placed far from the metal center. The amine-modified complexes are benchmarked to be among the most active catalysts for reducing CO₂ to formic acid, with a maximum turnover frequency of up to 5500 s^-1 at an overpotential of 630 mV. The conversion even works at overpotentials as low as 300 mV, although through an alternative mechanism. Mechanistically, the formation of a Mn-hydride species aided by in situ protonated amine groups was determined to be a key intermediate by cyclic voltammetry, ¹H NMR, DFT calculations, and infrared spectroelectrochemistry.

Polyoxometalate-based electron transfer modulation for efficient electrocatalytic carbon dioxide reduction

The electrocatalytic carbon dioxide (CO2) reduction reaction (CO2RR) involves a variety of electron transfer pathways, resulting in poor reaction selectivity, limiting its use to meet future energy requirements. Polyoxometalates (POMs) can both store and release multiple electrons in the electrochemical process, and this is expected to be an ideal "electron switch" to match with catalytically active species, realize electron transfer modulation and promote the activity and selectivity of the electrocatalytic CO2RR. Herein, we report a series of new POM-based manganese-carbonyl (MnL) composite CO2 reduction electrocatalysts, whereby SiW12-MnL exhibits the most remarkable activity and selectivity for CO2RR to CO, resulting in an increase in the faradaic efficiency (FE) from 65% (MnL) to a record-value of 95% in aqueous electrolyte. A series of control electrochemical experiments, photoluminescence spectroscopy (PL), transient photovoltage (TPV) experiments, and density functional theory (DFT) calculations revealed that POMs act as electronic regulators to control the electron transfer process from POM to MnL units during the electrochemical reaction, enhancing the selectivity of the CO2RR to CO and depressing the competitive hydrogen evolution reaction (HER). This work demonstrates the significance of electron transfer modulation in the CO2RR and suggests a new idea for the design of efficient electrocatalysts towards CO2RR.

Reduction-induced CO dissociation by a [Mn(bpy)(CO)4][SbF6] complex and its relevance in electrocatalytic CO2 reduction

[Mn(bpy)(CO)3Br] is recognized as a benchmark electrocatalyst for CO2 reduction to CO, with the doubly reduced [Mn(bpy)(CO)3]- proposed to be the active species in the catalytic mechanism. The reaction of this intermediate with CO2 and two protons is expected to produce the tetracarbonyl cation, [Mn(bpy)(CO)4]+, thereby closing the catalytic cycle. However, this species has not been experimentally observed. In this study, [Mn(bpy)(CO)4][SbF6] (1) was directly synthesized and found to be an efficient electrocatalyst for the reduction of CO2 to CO in the presence of H2O. Complex 1 was characterized using X-ray crystallography as well as IR and UV-Vis spectroscopy. The redox activity of 1 was determined using cyclic voltammetry and compared with that of benchmark manganese complexes, e.g., [Mn(bpy)(CO)3Br] (2) and [Mn(bpy)(CO)3(MeCN)][PF6] (3). Infrared spectroscopic analyses indicated that CO dissociation occurs after a single-electron reduction of complex 1, producing a [Mn(bpy)(CO)3(MeCN)]+ species. Complex 1 was experimentally verified as both a precatalyst and an on-cycle intermediate in homogeneous Mn-based electrocatalytic CO2 reduction.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Inter-ligand intramolecular through-space anisotropic shielding in a series of manganese carbonyl phosphorous compounds

Eight novel manganese carbonyl complexes of the type [Mn(bpy-tBu)(CO)3PR3]+ (bpy-tBu = 4,4'-di-tert-butyl-2,2'-bipyridine; R = Cy, nBu, Me, p-tol, Ph, p-F-Ph, OEt, and OMe), have been synthesized and characterized by 1H NMR, FTIR, UV/Vis, HRMS and CV. X-ray crystallographic structures of [Mn(bpy-tBu)(CO)3(PCy3)]+ and [Mn(bpy-tBu)(CO)3(PPh3)]+ were obtained. The short Mn-P bond length allows for close proximity of the bipyridine ligand and the phosphine R groups, resulting in strong anisotropic shielding of certain bipyridine protons by aryl R groups (reordering the bipyridine 1H NMR pattern in the most extreme case). Electrochemical analysis of the compound series reveals that while each is a competent precatalyst for electrochemical carbon dioxide reduction (to carbon monoxide), the lability of the PR3 ligand results in similar catalytic performance amongst the series.

An Investigation of Electrocatalytic CO2 Reduction Using a Manganese Tricarbonyl Biquinoline Complex

The subject of this study [fac-Mn(bqn)(CO)₃(CH₃CN)]⁺ (bqn = 2,2′-biquinoline), is of particular interest because the bqn ligand exhibits both steric and electronic influence over the fundamental redox properties of the complex and, consequently, its related catalytic properties with respect to the activation of CO₂. While not a particularly efficient catalyst for CO₂ to CO conversion, in-situ generation and activity measurements of the [fac-Mn(bqn)(CO)₃]⁻ active catalyst allows for a better understanding of ligand design at the Mn center. By making direct comparisons to the related 2,2′-bipyridyl (bpy), 1,10-phenanthroline (phen), and 2,9-dimethyl-1,10-phenanthroline (dmphen) ligands via a combination of voltammetry, infrared spectroelectrochemistry, controlled potential electrolysis and computational analysis, the role of steric vs. electronic influences on the nucleophilicity of Mn-based CO₂ reduction electrocatalysts is discussed.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.