Metal-organic frameworks and their derivatives as bifunctional electrocatalysts

Tuning the Electronic Property of Reconstructed Atomic Ni-CuO Cluster Supported on N/O-C for Electrocatalytic Oxygen Evolution

Electrochemical activation usually accompanies in situ atom rearrangement forming new catalytic sites with higher activity due to reconstructed atomic clusters or amorphous phases with abundant dangling bonds, vacancies, and defects. By harnessing the pre-catalytic process of reconstruction, a multilevel structure of CuNi alloy nanoparticles encapsulated in N-doped carbon (CuNi nanoalloy@N/C) transforms into a highly active compound of Ni-doped CuO nanocluster supported on (N/O-C) co-doped C. Both the exposure of accessible active sites and the activity of individual active sites are greatly improved after the pre-catalytic reconstruction. Manipulating the Cu/Ni ratios of CuNi nanoalloy@N/C can tailor the electronic property and d-band center of the high-active compound, which greatly optimizes the energetics of oxygen evolution reaction (OER) intermediates. This interplay among Cu, Ni, C, N, and O modifies the interface, triggers the active sites, and regulates the work functions, thereby realizing a synergistic boost in OER.

Bimetallic Organic Frameworks via In Situ Solvothermal Sol-Gel-Crystal and Sol-Crystal Transformation as Durable Electrocatalysts for Oxygen Reduction Reaction

The in situ solvothermal conversion of metal-organic gels (MOGs) to crystalline metal-organic frameworks (MOFs) represents a versatile and ingenious strategy that has been employed for the synthesis of MOF materials with specific morphologies, high yield, and improved functional properties. Herein, we have adopted an in situ solvothermal conversion of bimetallic MOGs to crystalline bimetallic MOFs with the aim of introducing a redox-active metal heterogeneity into the monometallic counterpart. The formation of bimetallic NiZn-MOF and CoZn-MOF via in situ solvothermal sol-gel-crystal and sol-crystal transformation is found to depend on the solvent systems used. The sol-to-gel-to-crystal transformation of NiZn-MOF via the formation of NiZn-MOG is found to occur through the gradual disruption of gel fibers leading to subsequent formation of microcrystals and single crystals of NiZn-MOF. These bimetallic MOFs and MOGs serve as promising electrocatalysts for oxygen reduction reaction (ORR) with an excellent methanol tolerance property, which can be attributed to the enhanced mass and charge transfer, higher oxygen vacancies, and bimetallic synergistic interactions among the heterometals. This work demonstrates a convenient strategy for producing bimetallic MOGs to MOFs through the introduction of a redox-active metal heterogeneity in the inorganic hybrid functional materials for fundamental and applied research. Our results connect MOGs and MOFs which have been regarded as having opposite physical states, that is, soft vs hard, and provide promising structural correlation between MOGs and MOFs at the molecular level.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

Heterostructured Bimetallic MOF-on-MOF Architectures for Efficient Oxygen Evolution Reaction

Electron modulation presents a captivating approach to fabricate efficient electrocatalysts for the oxygen evolution reaction (OER), yet it remains a challenging undertaking. In this study, an effective strategy is proposed to regulate the electronic structure of metal-organic frameworks (MOFs) by the construction of MOF-on-MOF heterogeneous architectures. As a representative heterogeneous architectures, MOF-74 on MOF-274 hybrids are in situ prepared on 3D metal substrates (NiFe alloy foam (NFF)) via a two-step self-assembly method, resulting in MOF-(74 + 274)@NFF. Through a combination of spectroscopic and theory calculation, the successful modulation of the electronic property of MOF-(74 + 274)@NFF is unveiled. This modulation arises from the phase conjugation of the two MOFs and the synergistic effect of the multimetallic centers (Ni and Fe). Consequently, MOF-(74 + 274)@NFF exhibits excellent OER activity, displaying ultralow overpotentials of 198 and 223 mV at a current density of 10 mA cm-2 in the 1.0 and 0.1 M KOH solutions, respectively. This work paves the way for manipulating the electronic structure of electrocatalysts to enhance their catalytic activity.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Design Strategy of Corrosion-Resistant Electrodes for Seawater Electrolysis

Electrocatalytic water splitting for hydrogen (H₂) production has attracted more and more attention in the context of energy shortages. The use of scarce pure water resources, such as electrolyte, not only increases the cost but also makes application difficult on a large scale. Compared to pure water electrolysis, seawater electrolysis is more competitive in terms of both resource acquisition and economic benefits; however, the complex ionic environment in seawater also brings great challenges to seawater electrolysis technology. Specifically, chloride oxidation-related corrosion and the deposition of insoluble solids on the surface of electrodes during seawater electrolysis make a significant difference to electrocatalytic performance. In response to this issue, design strategies have been proposed to improve the stability of electrodes. Herein, basic principles of seawater electrolysis are first discussed. Then, the design strategy for corrosion-resistant electrodes for seawater electrolysis is recommended. Finally, a development direction for seawater electrolysis in the industrialization process is proposed.

Research on engineered electrocatalysts for efficient water splitting: a comprehensive review

Water electrolysis plays an interesting role toward hydrogen generation for overcoming global environmental crisis and solving the energy storage problem. However, there is still a deficiency of efficient electrocatalysts to overcome sluggish kinetics for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Great efforts have been employed to produce potential catalysts with low overpotential, rapid kinetics, and excellent stability for HER and OER. At present, hydrogen economy is driven by electrocatalysts with excellent characteristics; thus, systematic design strategy has become the driving force to exploit earth-abundant transition metal-based electrocatalysts toward H₂ economy. In this review, the recent progress on newer materials including metals, alloys, and transition metal oxides (manganese oxides, cobalt oxides, nickel oxides, PBA-derived metal oxides, and metal complexes) as photocatalysts/electrocatalysts has been overviewed together with some methodologies for efficient water splitting. Metal-organic framework (MOF)-based electrocatalysts have been highly exploited owing to their interesting functionalities. The photovoltaic-electrocatalytic (PV-EC) process focused on harvesting high solar-to-hydrogen efficiency (STH) among various solar energy conversion as well as storage systems. Electrocatalysts/photocatalysts with high efficiency have become an urgent need for overall water splitting. Also, cutting-edge achievements in the fabrication of electrocatalysts along with theoretical consideration have been discussed.

Space-Confined Anchoring of Fe-Nx on Concave N-Doped Carbon Cubes for Catalyzing Oxygen Reduction

Carbon-based electrocatalysts with atomically dispersed Fe-N-C display promising performance for oxygen reduction reaction (ORR) amongst non-precious electrocatalysts. Nonetheless, increasing the number and utilization of Fe-N-C active sites is challenging. Designing morphologies and adjusting the pore structure of carbon-based electrocatalysts would boost the mass transfer, enhance the utilization of the active sites, and increase the overall ORR performance. In this work, a concave N-doped carbon cubes structure adorned with highly external Fe-N_x was designed and produced by the space-confined induced strategy. The optimal electrocatalyst revealed excellent ORR activity in both alkaline and acidic electrolytes, with half-wave potentials of 0.86 and 0.75 V, respectively. The superior performance arose from its unique concave structure, possessing more accessible active sites with improved intrinsic activity, which holds promising potential for preparing advanced ORR electrocatalysts.

Recent advancement in bimetallic metal organic frameworks (M’MOFs): Synthetic challenges and applications

Metal-organic frameworks (MOFs) is a burgeoning research field and has received increasing interest in recent years due to their inherent advantages of inorganic metal ions, range of organic linkers, tunable...

A highly active oxygen evolution electrocatalyst derived from Co/Ni-succinic acid framework under mild conditions

By utilizing a Co-MOF consisting of succinic acid, Co/Ni/B derivatives were synthesized under mild conditions to act as efficient OER electrocatalysts.

High-Performance Capacitive Deionization and Killing Microorganism in Surface-Water by ZIF-9 Derived Carbon Composites

The protection and regeneration of the water environment is currently one of the most critical concerns for the sustainable development of human society. To solve the water crisis, the use of capacitive deionization (CDI) technology to extract fresh-water that is suitable for human consumption from abundant surface-water is a feasible solution. In this work, a cobalt benzimidazole frameworks (ZIF-9) derived carbon composites with a unique quasi-microcubic morphology is synthesized and used the as-prepared materials as an electrode material for the CDI. Interestingly, the ZIF-9 derived carbon composites exhibit an impressive desalination capacity of 55.4 mg g^-1 and can be reused. Measurements in surface-water (Beijing-Hangzhou Grand Canal, Slender West Lake, Initial rainwater, Rain water) show that this CDI technology based on ZIF-9 derived carbon composites not only has a strong adsorption effect on metal ions but also can remarkably kill microorganisms. The results show that the technology can effectively kill bacteria (Escherichia coli and Bacillus) and algae with 95% and 91.7% inhibition rates, respectively. This work provides a valuable example for the use of metal-organic framework-derived carbon composites as high-performance electrode materials of CDI and opens a new direction for promoting the application of CDI in surface-water.

Controllable Synthesis of Graphene-Encapsulated NiFe Nanofiber for Oxygen Evolution Reaction Application

Carbon-Encapsulated NiFe Nanofiber NixFey@C-CNFs have been demonstrated to be promising candidates to replace conventional nobel metals-based catalysts for oxygen evolution reaction. Here, we developed a facile method of electrospinning and high temperature carbonization to synthesize NixFey@C-CNFs catalysts. It is proved that Ni3Fe7@C-CNFs exhibited low overpotential (245 mV) and excellent stability in alkaline electrolyte for OER. This work provides a good platform for the synthesis and design of graphene-encapsulated alloy catalysts.

Steric effects in the hydrogen evolution reaction based on the TMX4 active center: Fe-BHT as a case study

In this work, Fe-BHT is identified as the most efficient catalyst for the hydrogen evolution reaction (HER) among the TM-BHTs (TM = Sc, Ti, V, Cr, Mn, Fe, Co, and Ni), with an overpotential as low as 0.09 V. It is found that Fe d_z² orbitals do not participate in the bonding with surrounding S/N atoms in the FeX₄ active center but are bonding states for hydrogen adsorption. In accordance with our results, a steric effect determined energy gap acts as an efficient descriptor for the HER activity, which has never been discussed in previous studies. In addition, strain engineering proves the proposed steric effects, which also highlights the importance of the point group symmetry of active centers.

Constructing Precise Coordination of Nickel Active Sites on Hierarchical Porous Carbon Framework for Superior Oxygen Reduction

Single-atom catalysts (SACs) with specific coordination environment are expected to be efficient electrocatalysts for oxygen reduction reaction (ORR). Herein, NiN₄ C₁₀ coordination site is constructed through encapsulating Ni²⁺ into the cavity of ZIF-8 as a self-sacrificing precursor and anchoring it on 3D N-doped carbon frameworks. The NiN₄ C₁₀ catalyst shows excellent ORR activity and stability, with a high half-wave potential (0.938 V vs RHE), which is currently the best performances in Ni-based SACs. The remarkable performance with high ORR activity in alkaline solution is attributed to the single-atom nickel active sites with faster electron transport and suitable electronic structure. Moreover, the power density of zinc-air battery assembled by NiN₄ C₁₀ as cathode is 47.1% higher than that of the commercial Pt/C. This work not only provides a facile method to prepare extremely active Ni-based SACs, but also studies the intrinsic mechanism toward the oxygen reduction reaction under alkaline condition.

Recent Advances on MOF Derivatives for Non-Noble Metal Oxygen Electrocatalysts in Zinc-Air Batteries

Oxygen electrocatalysts are of great importance for the air electrode in zinc-air batteries (ZABs). Owing to the high specific surface area, controllable pore size and unsaturated metal active sites, metal-organic frameworks (MOFs) derivatives have been widely studied as oxygen electrocatalysts in ZABs. To date, many strategies have been developed to generate efficient oxygen electrocatalysts from MOFs for improving the performance of ZABs. In this review, the latest progress of the MOF-derived non-noble metal-oxygen electrocatalysts in ZABs is reviewed. The performance of these MOF-derived catalysts toward oxygen reduction, and oxygen evolution reactions is discussed based on the categories of metal-free carbon materials, single-atom catalysts, metal cluster/carbon composites and metal compound/carbon composites. Moreover, we provide a comprehensive overview on the design strategies of various MOF-derived non-noble metal-oxygen electrocatalysts and their structure-performance relationship. Finally, the challenges and perspectives are provided for further advancing the MOF-derived oxygen electrocatalysts in ZABs.

Conversion of bimetallic MOF to Ru-doped Cu electrocatalysts for efficient hydrogen evolution in alkaline media

The rational design and construction of inexpensive and highly active electrocatalysts for hydrogen evolution reaction (HER) is of great importance for water splitting. Herein, we develop a facile approach for preparation of porous carbon-confined Ru-doped Cu nanoparticles (denoted as Ru-Cu@C) by direct pyrolysis of the Ru-exchanged Cu-BTC metal-organic framework. When served as the electrocatalyst for HER, strikingly, the obtained Ru-Cu@C catalyst exhibits an ultralow overpotential (only 20 mV at 10 mA cm^-2) with a small Tafel slope of 37 mV dec^-1 in alkaline electrolyte. The excellent performance is comparable or even superior to that of commercial Pt/C catalyst. Density functional theory (DFT) calculations confirm that introducing Ru atoms into Cu nanocrystals can significantly alter the desorption of H₂ to achieve a close-to-zero hydrogen adsorption energy and thereby boost the HER process. This strategy gives a fresh impetus to explore low-cost and high-performance catalysts for HER in alkaline media.

Anion exchange strategy to improve electrocatalytic hydrogen evolution performances in cationic metal–organic frameworks

Through an anion exchange strategy, the post-synthetic cationic metal–organic frameworks present better electrocatalytic performances during the hydrogen evolution reaction process than the pristine one.

Recent Progress on NiFe-Based Electrocatalysts for the Oxygen Evolution Reaction

The seriousness of the energy crisis and the environmental impact of global anthropogenic activities have led to an urgent need to develop efficient and green fuels. Hydrogen, as a promising alternative resource that is produced in an environmentally friendly and sustainable manner by a water splitting reaction, has attracted extensive attention in recent years. However, the large-scale application of water splitting devices is hindered predominantly by the sluggish oxygen evolution reaction (OER) at the anode. Therefore, the design and exploration of high-performing OER electrocatalysts is a critical objective. Considering their low prices, abundant reserves, and intrinsic activities, NiFe-based bimetal compounds are widely studied as excellent OER electrocatalysts. Moreover, recent progress on NiFe-based OER electrocatalysts in alkaline environments is comprehensively and systematically introduced through various catalyst families including NiFe-layered hydroxides, metal-organic frameworks, NiFe-based (oxy)hydroxides, NiFe-based oxides, NiFe alloys, and NiFe-based nonoxides. This review briefly introduces the advanced NiFe-based OER materials and their corresponding reaction mechanisms. Finally, the challenges inherent to and possible strategies for producing extraordinary NiFe-based electrocatalysts are discussed.

Understanding the Efficiency and Selectivity of Two-Electron Production of Metalloporphyrin-Embedded Zirconium-Pyrogallol Scaffolds in Electrochemical CO2 Reduction

Because of the high efficiency and mild reaction conditions, electrocatalytic CO₂ reduction (ECR) has attracted significant attention in recent years. However, the specific mechanism of the formation of the two-electron production (CO or HCOOH) in this reaction is still unclear. Herein, with density functional theory calculation and experimental manipulation, the specific mechanism of the selective two-electron reduction of CO₂ has been systematically investigated, employing the polyphenolate-substituted metalloporphyrinic frameworks, ZrPP-1-M (M = Fe, Co, Ni, Cu, and Zn), as model catalysts. Experimental observations and theoretical calculations discovered that ZrPP-1-Co is a more favorable catalyst for ECR among them. Compared with the formation of HCOOH, electroreduction of CO₂ into CO has more beneficial thermodynamic and kinetic routes with ZrPP-1-Co as a catalyst. After introducing the r-GO for improving the conductivity, the Faradaic efficiency for CO formation is 82.4% at -0.6 v (vs RHE).

Metal-organic framework based bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries: current progress and prospects

Zinc-air batteries (ZABs) are regarded as ideal candidates for next-generation energy storage equipment due to their high energy density, non-toxicity, high safety, and environmental friendliness. However, the slow oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics on the air cathode limit their efficiency and the development of highly efficient, low cost and stable bifunctional electrocatalysts is still challenging. Metal-Organic Framework (MOF) based bifunctional oxygen electrocatalysts have been demonstrated as promising alternative catalysts due to the regular structure, tunable chemistry, high specific surface area, and simple and easy preparation of MOFs, and great progress has been made in this area. Herein, we summarize the latest research progress of MOF-based bifunctional oxygen electrocatalysts for ZABs, including pristine MOFs, derivatives of MOFs and MOF composites. The effects of the catalysts' composites, morphologies, specific surface areas and active sites on catalytic performances are specifically addressed to reveal the underlying mechanisms for different catalytic activity of MOF based catalysts. Finally, the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.

Nanostructured Iron Fluoride Derived from Fe-Based Metal-Organic Framework for Lithium Ion Battery Cathodes

A comprehensive strategy for the morphological control of octahedral and spindle Fe-based metal-organic frameworks (Fe-MOFs) via microwave-assisted adjustment is proposed in this research. Afterward, in situ copyrolysis under N₂ atmosphere contributes to the fabrication of two shape-maintained FeF₃·0.33H₂O nanostructures (named O-FeF₃·0.33H₂O and S-FeF₃·0.33H₂O, respectively) with confined hierarchical porosity and graphitized carbon skeleton. The lithium storage performances for the MOF-derived octahedral O-FeF₃·0.33H₂O and spindle S-FeF₃·0.33H₂O composites are investigated, and the prospective lithium storage mechanism is discussed. As a result, the main product of the porous O-FeF₃·0.33H₂O structure is found to be a promising cathode material for lithium ion batteries owing to its advantageous electrochemical capability. Even after being cycled over 1000 times at 2 C (1 C = 237 mAh g^-1), the capacity attenuation rate of the as-prepared O-FeF₃·0.33H₂O electrode is as low as 0.039% per cycle. The combination of proper octahedral morphology and highly graphitized carbon modification can not only enhance the conductivity of the cathode but also promote the diffusion of Li⁺ effectively. The remarkable performance of octahedral O-FeF₃·0.33H₂O can be confirmed by the Li-ion diffusion coefficient (D_Li⁺) calculation analysis and kinetics analysis of lithium storage behavior.