Metal-organic frameworks as stationary phases for chromatography and solid phase extraction: A review

Determination of insecticide residues in beverages based on MIL-100(Fe) dispersive solid-phase microextraction in combination with dispersive liquid-liquid microextraction followed by HPLC-MS/MS

A novel dispersive solid-phase microextraction method based on a metal-organic framework (MIL-100(Fe)) combined with a dispersive liquid-liquid microextraction technique was proposed for the extraction and enrichment of four insecticides in beverages. The qualitative and quantitative analysis of these insecticides was conducted using HPLC-MS/MS. To optimize the extraction process, several parameters were investigated, and the main variables were optimized using CCD-based RSM. The developed method displayed a wide linear range of 1.000-1000 ng/L and R2 values >0.993 for all four calibration curves. The method demonstrated high sensitivity, with LODs and LOQs of 0.3-0.6 ng/L and 0.8-1.0 ng/L, respectively. In addition, the greenness of the proposed method was assessed using the Complex GAPI tool, and the results showed that the proposed method exhibits benefits, such as minimal usage of organic solvents and negligible matrix influence, making it a suitable method for the detection of insecticide residues in beverages.

Dialdehyde cellulose-based mixed-mode stationary phases for diversified high-performance liquid chromatography separations

To deal with complicated separation situations, this study successfully prepared two mixed-mode chromatography (MMC) stationary phases, CCL-SIL and PCL-SIL, by functionalizing dialdehyde cellulose (DAC) derivatives. In liquid chromatography applications, CCL-SIL exhibited superior separation performance for nucleosides and bases in HILIC mode, while PCL-SIL performed better in RPLC and IEC modes. Their distinct separation mechanisms were also elucidated by quantum chemical calculations. Both CCL-SIL and PCL-SIL showed good stability and reproducibility, with relative standard deviations of retention time, peak area, and peak height below 7.79 % and 4.37 % for multiple injections. Particularly, the PCL-SIL column and the CCL-SIL column were successfully used for the quantitative analysis of trace targets in real samples with complex matrix, demonstrating high accuracy and precision.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Propanediamine modified pillar[5]arene: A novel stationary phase for the high selectivity separation of versatile analytes

The unique properties of pillar[5]arene, including hydrophobic cavities, π-π conjugated and easy modification, make it a promising candidate as stationary phase for HPLC. Herein, we fabricated a novel propanediamine modified pillar[5]arene bonded silica as the stationary phase (PDA-BP5S) for reversed-phase liquid chromatography (RPLC). Benefiting from the significant hydrophobicity, π-π conjugative, p-π effect, and hydrogen bonding, the PDA-BP5S packed column showed high separation performance of versatile analytes involving polycyclic aromatic hydrocarbons, alkyl benzenes, phenols, arylamine, phenylethane/styrene/ phenylacetylene, toluene/m-xylene/mesitylene, halobenzenes, benzenediol and nitrophenol isomers. Especially, the separation of halobenzenes appeared to be controlled by both the size of the halogen substituents and the strength of the noncovalent bonding interactions, which was further confirmed by molecular dynamics simulation. The satisfactory separation and repeatability revealed the promising prospects of amine-pillar[5]arene-based stationary phase for RPLC.

4D-Printed Elution-Peak-Guided Dual-Responsive Monolithic Packing for the Solid-Phase Extraction of Metal Ions

Four-dimensional printing (4DP) technologies are revolutionizing the fabrication of stimuli-responsive devices. To advance the analytical performance of conventional solid-phase extraction (SPE) devices using 4DP technology, in this study, we employed N-isopropylacrylamide (NIPAM)-incorporated photocurable resins and digital light processing three-dimensional printing to fabricate an SPE column with a [H+]/temperature dual-responsive monolithic packing stacked as interlacing cuboids to extract Mn, Co, Ni, Cu, Zn, Cd, and Pb ions. When these metal ions were eluted using 0.5% HNO3 solution as the eluent at a temperature below the lower critical solution temperature of polyNIPAM, the monolithic packing swelled owing to its hydrophilic/hydrophobic transition and electrostatic repulsion among the protonated units of polyNIPAM. These effects resulted in smaller interstitial volumes among these interlacing cuboids and improvements in the elution peak profiles of the metal ions, which, in turn, demonstrated the reduced method detection limits (MDLs; range, 0.2-7.2 ng L-1) during analysis using inductively coupled plasma mass spectrometry. We studied the effects of optimizing the elution peak profiles of the metal ions on the analytical performance of this method and validated its reliability and applicability by analyzing the metal ions in reference materials (CASS-4, SLRS-5, 1643f, and Seronorm Trace Elements Urine L-2) and performing spike analyses of seawater, groundwater, river water, and human urine samples. Our results suggest that this 4D-printed elution-peak-guided dual-responsive monolithic packing enables lower MDLs when packed in an SPE column to facilitate the analyses of the metal ions in complex real samples.

Micro gas chromatographic column with copper benzene-1,3,5-tricarboxylate modified by multilayer fluorinated graphene as a stationary phase

A composite material was synthesized at room temperature by performing modification of the copper benzene-1,3,5-tricarboxylate (HKUST-1) metal-organic framework material by multilayer fluorinated graphene (FG). The FG-HKUST-1 composite was used as a stationary phase for a micro gas chromatography column (μGCC) fabricated using micro-electro-mechanical system (MEMS) technology. The separation results showed that the μGCC with the FG-HKUST-1 composite stationary phase achieved a baseline separation of C1-C4 in 8 min. The retention factors for C2-C4 were 2.13, 7.14, and 12.04, respectively. The maximum relative standard deviation (RSD) of the retention times was 0.14 %. The difference in the retention time between methane and ethane was 1.11 min, with a resolution of 9.2 for methane and ethane. The retention factor of ethane and the resolution of methane and ethane were increased by 166 % and 114 %. Therefore, this μGCC is promising for separating light hydrocarbons with widely differing concentrations.

Synthesis, Structural Versatility, Magnetic Properties, and I- Adsorption in a Series of Cobalt(II) Metal-Organic Frameworks with a Charge-Neutral Aliphatic (O,O)-Donor Bridge

Four new metal-organic frameworks based on cobalt(II) salts and 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide (odabco) were obtained. Their crystallographic formulae are [Co3(odabco)2(OAc)6] (1, OAc- = acetate), [Co(H2O)2(HCOO)2]·odabco (2), [Co2(H2O)(NO3)(odabco)5](NO3)3·3.65H2O (3), and [Co2(DMF)2(odabco)4](NO3)4·3H2O (4; DMF = N,N-dimethylformamide). Crystal structures of 1-4 were determined by single-crystal X-ray crystallography. Coordination polymer 1 comprises binuclear and mononuclear metal-acetate blocks alternating within uncharged one-dimensional chains, in which odabco acts as a bridging ligand. A layered Co(II) formate 2 contains odabco only as guest molecules located in the interlayer space. Layered compound 3 and three-dimensional 4 have cationic coordination frameworks with 26% and 34% specific void volumes, respectively, unveiling high structural diversity of Co(II)-odabco MOFs based on quite a rare aliphatic moiety. Magnetization measurements were performed for 1, 3, and 4 and the obtained data were interpreted on the basis of their crystal structures. A strong (J/kB~100 K) antiferromagnetic coupling was found within binuclear metal blocks in 1. Ion exchange experiments revealed a considerable iodide uptake by 3 resulting in an up to 75% guest nitrate substitution within the voids of a coordination framework, found by capillary zone electrophoresis data and confirmed by single-crystal XRD. A preservation of 3 crystallinity during the exchange allowed for the guest I- positions within a new adduct with the formula [Co2(H2O)(NO3)(odabco)5]I2(NO3)·1.85H2O (3-I) to be successfully determined and the odabco aliphatic core to be revealed as a main adsorption center for quite large and easily polarizable iodide anions. In summary, this work presents a comprehensive study for a series of 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide-based MOFs of cobalt(II) within the framework of magnetic properties and reports the first example of anion exchange in odabco-based coordination networks, supported by direct X-ray structural data. The reported results unveil promising applications of such frameworks bearing ligands with an aliphatic core in the diverse structural design of selective adsorbents and other types of functional materials.

Recent development of chiral ionic liquids for enantioseparation in liquid chromatography and capillary electrophoresis: A review

Ionic liquids (ILs), which are salts in a molten state below 100 °C, have become a hot topic of research in various fields because of their negligible vapour pressure, high thermal stability, and tunable viscosity. Chiral ionic liquids (CILs) can be applied in chromatography and capillary electrophoresis fields to improve the performance of enantiomeric separation, such as chiral stationary phases (CSPs) and mobile phase additives in high-performance liquid chromatography (HPLC); CSPs in gas chromatography (GC); and background electrolyte additives (BGE), chiral ligands and chiral selectors (CSs) in capillary electrophoresis (CE). This review focuses on the applications of CILs in HPLC and CE for the separation of enantiomers in the past five years. The mechanism for separating enantiomers was explained, and the prospect of the application of CILs in chiral liquid chromatography (LC) and CE analysis was also discussed.

Surface engineered functional biomaterials for hazardous pollutants removal from aqueous environment

The issue of water contamination by heavy metal ions as highly persistent pollutants with harmful influence primarily on biological systems, even in trace levels, has become a great environmental concern globally. Therefore, there is a need for the use of highly sensitive techniques or preconcentration methods for the removal of heavy metal ions at trace levels. Thus, this research investigates a novel approach by examining the possibility of using pomegranate (Punica granatum) peel layered material for the simultaneous preconcentration of seven heavy metal ions; Cd(II), Co(II), Cr(III), Cu(II), Mn(II), Ni(II) and Pb(II) from aqueous solution and three river water samples. The quantification of the heavy metals was performed by the means of FAAS technique. The characterization of biomaterial was performed by SEM/EDS, FTIR analysis and pHpzc determination before and after the remediation process. The reusability study, as well as the influence of interfering ions (Ca, K, Mg, Na and Zn) were evaluated. The conditions of preconcentration by the column method included the optimization of solution pH (5); flow rate (1.5 mL/min), a dose of biosorbent (200 mg), type of the eluent (1 mol/L HNO₃), sample volume (100 mL) and sorbent fraction (<0.25 mm). The biosorbent capacity ranged from 4.45 to 57.70 μmol/g for the investigated heavy metals. The practical relevance of this study is further extended by novel data regarding adsorbent cost analysis (17.49 $/mol). The Punica granatum sorbent represents a highly effective and economical biosorbent for the preconcentration of heavy metal ions for possible application in industrial sectors.

Chiral metal-organic frameworks and their composites as stationary phases for liquid chromatography chiral separation: A minireview

Chiral metal organic frameworks (CMOFs) are a kind of crystal porous framework material that has attracted increasing attention due to the customizable combination of metal nodes and organic ligands. In particular, the highly ordered crystal structure and rich adjustable chiral structure make it a promising material for developing new chiral separation material systems. In this review, the progress of CMOFs and their different types of composites used as chiral stationary phases (CSPs) in liquid chromatography for enantioseparation are discussed. The characteristics of CMOFs and their composites are summarized, aiming to provide new ideas for the development of CMOFs with better performance and further promote the application of CMOFs materials in enantioselective high-performance liquid chromatography (HPLC).

Nanofiber-based sorbents: Current status and applications in extraction methods

Advanced sorbents gradually become a research hotspot on account of the increasing attention paid to environmental problems. Due to the prominent physicochemical features of nanofibers (NFs), such as high porosity, large surface area, favorable interconnectivity, high adsorption capacity, wettability, and the possibility of surface modification using functional groups, these nanostructures are regarded as excellent candidates for extraction applications. Therefore, the research in the field of NFs and their nanocomposites has been increasing in recent years. In the present review, we summarize the most recent studies on NFs-based sorbents focusing on strategies for preparation, characterization, and their unique capabilities as porous sorbents in various sorbent-based extraction methods. Moreover, we further described the performance and selectivity of sorbents to achieve improved extraction efficiency. Finally, some perspectives on the challenges and outlook are provided to aid future investigations related to this topic.

Magnetic/Zeolitic Imidazolate Framework-67 Nanocomposite for Magnetic Solid-Phase Extraction of Five Flavonoid Components from Chinese Herb Dicranopteris pedata

A magnetically functionalized Fe₃O₄@ZIF-67 metal-organic framework (MOF) was prepared by electrostatic self-assembly using magnetic Fe₃O₄ nanoparticles as the core and ZIF-67 as the shell. The composite was characterized by electron microscopy, X-ray diffraction, Fourier- transform infrared spectroscopy, and Brunauer-Emmett-Teller measurements. Magnetic solid-phase extraction (MSPE) was performed on five flavonoids from Dicranopteris pedata using Fe₃O₄@ZIF-67 as an adsorbent. The developed MSPE method was combined with high-performance liquid chromatography-ultraviolet detection to preconcentrate and separate five flavonoids (rutin, quercitrin, kaempferol-3-O-α-L-rhamnoside, quercetin, and kaempferol) from Dicranopteris pedata. The factors affecting the extraction, such as the amount of Fe₃O₄@ZIF-67 adsorbent, salt ion concentration in the sample solution, vortex time, type and amount of desorbing solvent, concentration of formic acid to acidify the desorbing solvent, and acetonitrile ratio, were optimized. The developed method showed good linearity over the concentration range of 1.09-70.0 μg∙mL^-1 for the five flavonoids, with R² values between 0.9901 and 0.9945. The limits of detection and average recoveries for the five flavonoids were in the ranges of 39.5-56.2 ng∙mL^-1 and 92.2-100.7%, respectively. The method presented herein is simple, efficient, and sensitive; it can be used for enrichment analysis of the five flavonoids in Dicranopteris pedata.

Preparation of spherical silica hydroxyl-functionalized covalent organic polymer composites for mixed-mode liquid chromatography

Covalent organic polymers are an emerging class of amorphous microporous materials that have raised increasing concerns in analytical chemistry due to their unique structural and surface chemical properties. However, the application of covalent organic polymers as mixed-mode stationary phases in chromatographic separations has rarely been reported. Herein, novel spherical silica hydroxyl-functionalized covalent organic polymer composites were successfully prepared via a layer-by-layer approach. The structure and morphology of the materials were carefully characterized by elemental analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller, and contact angle measurements. Baseline separations of various alkylbenzenes, polycyclic aromatic hydrocarbons, and nucleosides and bases were achieved on the prepared stationary phase under reversed-phase/hydrophilic interaction mode. The column efficiencies of 23 853 and 36 580 plates/m were obtained for butylbenzene and uracil, respectively, and the relative standard deviation of the retention time for continuous injections was less than 1.38% (n = 10), suggesting satisfactory column efficiency and repeatability. Additionally, this novel stationary phase realized the complete separation of the endocrine-disrupting chemicals in river water. This work affords a new route for synthesizing covalent organic polymers-based mixed-mode stationary phase and further reveals their great potential in chromatographic separation.

The progress on porous organic materials for chiral separation

Chiral compounds have similar structures and properties, but their pharmacological action is very different or even opposite. Therefore, the separation of chiral compounds has great significance in pharmaceutical and agriculture. Porous organic materials are novel crystalline porous materials, which possess high surface area, controllable pore size, and favorable functionalization. Therefore, porous organic materials are considered to be an ideal material for chiral separation. In this review, we summarized the progress of chiral porous organic materials for chiral separation in recent years. Furthermore, the applications of chiral porous organic materials as chiral separation medias (chromatography stationary phases and membrane materials) in enantioseparation were highlighted. Finally, the remaining challenges and future directions for porous organic materials in chiral separation were also briefly outlined further to promote the development of porous organic materials in chiral separation.