Photoelectrocatalytic degradation of endocrine-disruptor bisphenol – A with significantly activated peroxymonosulfate by Co-BiVO4 photoanode

Key role of sulfur in sulfidated zerovalent iron during persulfate activation for the dynamic equilibrium of oxidative radicals including SO4•- and •OH

Surface sulfidation has been widely investigated to effectively enhance the utilization and selectivity of iron electrons for enhanced pollutant reduction. However, there is relatively less knowledge on whether sulfidation facilitates the catalytic oxidation process and the mechanism of enhancement. Therefore, in this study, the role of surface sulfidation in modulating the oxidant decomposition pathway and reactive oxygen species generation was investigated with the sulfidated zerovalent iron (S-ZVI) activated persulfate (PS) system. The results revealed that sulfur on the surface of S-ZVI not only facilitates PS activation to generate more SO4•-, but also acts as an essential in the dynamic equilibrium between SO4•- and •OH. Specifically, the S-ZVI surface sulfide first forms sulfur monomers during catalysis, which promotes electron transfer to accelerate Fe3+ to Fe2+ cycling, prompting the generation of more SO4•- also generates SO32-. Then, SO32- is further reacted with •OH to generate the [O--O-SO3-] intermediate of SO4•-, which leads to a dynamic equilibrium of SO4•- and •OH, mitigating the further conversion of SO4•- to •OH. These findings unveiled the dynamic variation of sulfur on the surface of S-ZVI during PS activation, elevating new insights for the sulfate radical-based efficient degradation.

A critical review of persulfate-based electrochemical advanced oxidation processes for the degradation of emerging contaminants: From mechanisms and electrode materials to applications

The persulfate-based electrochemical advanced oxidation processes (PS-EAOPs) exhibit distinctive advantages in the degradation of emerging contaminants (ECs) and have garnered significant attention among researchers, leading to a consistent surge in related research publications over the past decade. Regrettably, there is still a lack of a critical review gaining deep into understanding of ECs degradation by PS-EAOPs. To address the knowledge gaps, in this review, the mechanism of electro-activated PS at the interface of the electrodes (anode, cathode and particle electrodes) is elaborated. The correlation between these electrode materials and the activation mechanism of PS is systematically discussed. The strategies for improving the performance of electrode material that determining the efficiency of PS-EAOPs are also summarized. Then, the applications of PS-EAOPs for the degradation of ECs are described. Finally, the challenges and outlook of PS-EAOPs are discussed. In summary, this review offers valuable guidance for the degradation of ECs by PS-EAOPs.

Efficient Photocatalytic Activation of Peroxymonosulfate by Cobalt-Doped Oxygen-Vacancies-Rich BiVO4 for Rapid Tetracycline Degradation

In this work, cobalt-doped oxygen-vacancies-rich BiVO4 (Co/BiVO4-Vo) was successfully synthesized for the degradation of tetracycline (TC) by activated peroxymonosulfate (PMS) under visible light. The morphologies, microstructures, and optical properties of the photocatalysts were analyzed in detail. Co/BiVO4-Vo exhibited significantly enhanced degradation, removing 92.3% of TC within 10 min, which was greater than those of pure BiVO4 (62.2%) and oxygen-vacancies-rich BiVO4 (BiVO4-Vo) (72.0%), respectively. The photogenerated charge separation and transport properties were explored through surface photovoltage (SPV), photoluminescence spectrum (PL), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) measurements. Additionally, an in-depth investigation was conducted on the photocatalytically assisted advanced oxidation processes based on SO4•- (SR-AOPs) for the degradation of organic pollutants. The experimental results showed that the introduction of oxygen vacancies and Co doping achieved an effective separation of photogenerated carriers, which could accelerate the cycling between Co3+ and Co2+ and further activate PMS. The results of free radical capture experiments and electron spin resonance (ESR) experiments showed that reactive oxygen species (ROSs) such as 1O2, •O2-, and SO4•- played a dominant role in the removal of pollutants. This work provides a novel insight into the further development of efficient and rapid PMS photoactivators for environmental remediation of water bodies.

Sustainable Electrochemical Activation of Self-Generated Persulfate for the Degradation of Endocrine Disruptors: Kinetics, Performances, and Mechanisms

This study presents an electrolysis system utilizing a novel self-circulation process of sulfate (SO42-) and persulfate (S2O82-) ions based on a boron-doped diamond (BDD) anode and an activated carbon fiber (ACF) cathode, which is designed to enable electrochemical remediation of environmental contaminants with reduced use of chemical reagents and minimized residues. The production of S2O82- and hydrogen peroxide (H2O2) on the BDD anode and ACF cathode, respectively, is identified as the source of active radicals for the contaminant degradation. The initiator, sulfate, is identified by comparing the degradation efficiency in NaSO4 and NaNO3 electrolytes. Quenching experiments and electron paramagnetic resonance (EPR) spectroscopy confirmed that the SO4-· and ·OH generated on the ACF cathode are the main reactive radicals. A comparison of the degradation efficiency and the generated S2O82-/H2O2 of the divided/undivided electrolysis system is used to demonstrate the superiority of the synergistic effect between the BDD anode and ACF cathode. This work provides evidence of the effectiveness of the philosophy of "catalysis in lieu of supplementary chemical agents" and sheds light on the mechanism of the generation and transmission of reactive species in the BDD and ACF electrolysis system, thereby offering new perspectives for the design and optimization of electrolysis systems.

Facilitated Visible-Light-Driven Peroxymonosulfate Activation by a Co-Fe Layered Double Hydroxide Derived p-n Heterostructure for Sulfadiazine Degradation: Affecting Parameters, Kinetics, and Mechanistic Insights

The utilization of multivalence ionic metal species generated through a peroxymonosulfate (PMS)-assisted photocatalytic system is a promising platform for the selective degradation of water contaminants. However, achieving an effective electron transport and enhanced separation efficiency for these metal species is a daunting challenge. Thus, our current study addresses this challenge by using a Co-Fe-based layered-double-hydroxide template to synthesize a Co3O4/FeCo2O4 p-n heterojunction composite via a simple monosynthetic route. The resultant composite is thoroughly validated through advanced characterization techniques that efficiently activate PMS for sulfadiazine (SDZ) degradation under visible light, achieving a remarkable degradation efficiency of up to 90%. This accomplishment is attributed to factors including intimate interfacial contact, excellent light harvesting, mesoporosity, and oxygen vacancies within the composite. The formation of a distinct p-n heterojunction following the S-scheme charge dynamic significantly enhances photogenerated carrier separation and reduces charge recombination. The research delves into comprehensive investigations including degradation studies, active species trapping experiments, parameter exploration, and in-depth liquid chromatography-mass spectrometry for analysis of the degradation byproducts and pathway. Induced oxygen vacancies, strategically placed active surface sites, and mesoporosity in the Co3O4/FeCo2O4 composite synergistically boosted the sluggish PMS activation, leading to enhanced SDZ degradation. This study introduces a new perspective by demonstrating the potential of a single-material, mixed-metal oxide-based p-n heterojunction photocatalytic system following the S-scheme charge-transfer route for SDZ degradation. The findings contribute toward emphasizing the importance of tailored composite materials in tackling persistent contaminants.

Sulfate Radical in (Photo)electrochemical Advanced Oxidation Processes for Water Treatment: A Versatile Approach

The search for a simple and clean approach toward the production of sulfate radicals for water treatment gave rise to electrochemical and photoelectrochemical activation techniques. The photoelectrochemical activation method does not just distinguish itself as a promising activation method, it is also used as an efficient water treatment method with the ability to treat a myriad of pollutants due to the complementary effects of highly reactive oxidizing species. This perspective highlights some merits that distinguish sulfate monoanion radicals from hydroxyl radicals. It highlights the electrochemical, photoelectrochemical, and in situ photoelectrochemical routes of generating sulfate radicals for advanced oxidation process approach to water treatment. We provide a detailed account of the few known applications of sulfate radical enhanced photoelectrochemical treatments of water laden with organics. Finally, we placed this area of research in perspective by providing outlooks and conclusive remarks.

Peroxymonosulfate assisted pesticide breakdown: Unveiling the potential of a novel S-scheme ZnO@CoFe2O4 photo-catalyst, anchored on activated carbon

A ternary hetero-junction was prepared by anchoring ZnO@CoFe2O4 (ZCF) on activated carbon (AC) and employed as a UV-assisted peroxymonosulfate (PMS) activator to boost the degradation of diazinon (DZN) pesticide. The structure, morphology, and optical properties of the ZCFAC hetero-junction were characterized through a series of techniques. The highest degradation efficiency of DZN (100% in 90 min) was achieved by the PMS-mediated ZCFAC/UV system, superior to other single or binary catalytic systems due to the strong synergistic effect between ZCFAC, PMS, and UV. The operating reaction conditions, synergistic effects, and the possible pathways of DZN degradation were investigated and discussed. Optical analysis showed that the band-gap energy of the ZCFAC hetero-junction not only enhanced the absorption of UV light but also reduced the recombination of photo-induced electron/hole pairs. Both radical and non-radical species (HO•, SO4•-, O2•-, 1O2, and h+) took part in the photo-degradation of DZN, assessed by scavenging tests. It was found that AC as a carrier not only improved the catalytic activity of CF and ZnO nanoparticles and conferred high stability for the catalyst but also played a crucial role in accelerating the catalytic PMS activation mechanism. Moreover, the PMS-mediated ZCFAC/UV system showed good reusability, universality, and practical applicability potential. Overall, this work explored an efficient strategy for the best use of hetero-structure photo-catalysts towards PMS activation to achieve high performance in decontaminating organic compounds.

Investigation of BiVO4-based advanced oxidation system for decomposition of organic compounds and production of reactive sulfate species

Growth of population and expansion of industries lead to increasing contamination of environment with various organic pollutants. If not properly cleaned, wastewater contaminates freshwater resources, aquatic environment and has huge negative impact on ecosystems, quality of drinking water and human health, therefore new and effective purification systems are in demand. In this work bismuth vanadate-based advanced oxidation system (AOS) for the decomposition of organic compounds and production of reactive sulfate species (RSS) was investigated. Pure and Mo-doped BiVO₄ coatings were synthesized using sol-gel process. Composition and morphology of coatings were characterized using X-ray diffraction and scanning electron microscopy techniques. Optical properties were analyzed using UV-vis spectrometry. Photoelectrochemical performance was studied using linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. It was shown that increase in Mo content affects the morphology of BiVO₄ films, reduces charge transfer resistance and enhances the photocurrent in the solutions of sodium borate buffer (with and without glucose) and Na₂SO₄. Mo-doping of 5-10 at.% leads to 2- to 3-fold increase in photocurrents. Faradaic efficiencies of RSS formation ranged between 70 and 90 % for all samples irrespective of Mo content. All studied coatings demonstrated high stability in long-lasting photoelectrolysis. In addition, effective light-assisted bactericidal performance of the films in deactivation of Gram positive Bacillus sp. bacteria was demonstrated. Advanced oxidation system designed in this work can be applied in sustainable and environmentally friendly water purification systems.

Ni-Co bimetallic decorated dodecahedral ZIF as an efficient catalyst for photoelectrochemical degradation of sulfamethoxazole coupled with hydrogen production

In this work, a NiCo bimetallic ZIF (BMZIF) dodecahedron material has been synthesized by the precipitation approach and then used for simultaneously photoelectrocatalytic degradation of sulfamethoxazole (SMX) and hydrogen production. The combination of Ni/Co loading in ZIF structure increased the specific surface area 1484 (m² g^-1) and photocurrent density (0.4 mA cm^-2), which can facilitate the good charge transfer efficiency. In presence of peroxymonosulfate (PMS, 0.1 mM), the complete degradation of SMX (10 mg L^-1) was achieved at initial pH of 7 within 24 min, with the pseudo-first-order rate constants of 0.18 min^-1 and TOC removal efficiency of 85 %. Radical scavenger experiments affirm that ^•OH radicals were the primary oxygen reactive species to drive the SMX degradation. Along with SMX degradation at the anode, the H₂ production was observed at the cathode (140 μmol cm^-2 h^-1), which was 1.5 and 3 times higher than that of Co-ZIF and Ni-ZIF, respectively. The superior catalytic performance of BMZIF was assigned to the distinctive internal structure and synergistic effect between ZIF and Ni/Co bimetals, which improves light absorption and charge conduction efficiency. This study may provide insight into the new way to treat polluted water and simultaneously produce green energy using bimetallic ZIF in a PEC system.

Photoelectrocatalytic peroxymonosulfate activation over CoFe2O4-BiVO4 photoanode for environmental purification: Unveiling of multi-active sites, interfacial engineering and degradation pathways

This work reported on the development of CoFe₂O₄-BiVO₄ photoanode based photoelectrocatalytic system collaborating with peroxymonosulfate activation for organic contaminants removal. CoFe₂O₄ layer not only provided active sites for direct peroxymonosulfate activation but also accelerated charge separation process for the enhancement of photocurrent density and photoelectrocatalytic performance. Junction of CoFe₂O₄ layer on BiVO₄ photoanode led to the improvement of photocurrent density to 4.43 mA/cm² at 1.23 V_RHE, which was approximately 4.06 times higher than that of pure BiVO₄. Subsequently, the corresponding optimal degradation efficiency toward the tetracycline model contaminant achieved to be 89.1% with total organic carbon removal value of about 43.7% within 60 min. Moreover, the degradation rate constant of CoFe₂O₄-BiVO₄ photoanode in photoelectrocatalytic system was 0.037 min^-1, which was about 1.23, 2.64 and 3.70 times higher than the values in photocatalysis, electrocatalysis and PMS only based systems, respectively. In addition, radical scavenging experiments and electron spin resonance spectra indicated a synergy of radical and nonradical coupling process where •OH and ¹O₂ played vital roles during tetracycline degradation. Plausible photoelectrocatalytic mechanism and degradation pathway were proposed. This work provided an effective strategy to construct peroxymonosulfate assisted photoelectrocatalytic system toward green environmental applications.

Study on the Adsorption Properties of Oxalic Acid-Modified Cordierite Honeycomb Ceramics for Neutral Red Dyes

Removal of organic dyes from water by monolithic adsorbents is considered as an efficient and no-secondary pollution method. Herein, for the first time cordierite honeycomb ceramics (COR) treated with oxalic acid (CORA) were synthesized. This CORA exhibits outstanding removal efficiency toward the azo neutral red dyes (NR) from water. After optimizing the reaction conditions, the highest adsorption capacity of 7.35 mg·g^-1 and a removal rate of 98.89% could be achieved within 300 min. Furthermore, investigation of the adsorption kinetics indicated this adsorption process could be described as a pseudo-second-order kinetic model with k ₂ and q _e of 0.0114 g·mg^-1·min^-1 and 6.94 mg·g^-1, respectively. According to the fitting calculation, the adsorption isotherm could also be described as the Freundlich isotherm model. The removal efficiency could be maintained above 50% after 4 cycles, negating the need for toxic organic solvent extraction, offering a method for bringing the technology one step closer to industrial application and giving CORA promising potential in practical water treatment.

Laccase-coupled photoelectrocatalytic system for highly efficient degradation of bisphenol A

In the present work, a hybrid advanced oxidation process that combined laccase with photoelectrocatalysis (PEC) was explored for highly efficient degradation of bisphenol A (BPA). Visible light-responsive BiVO₄ film electrode with good optical and photoelectrochemical properties was prepared via an electrodeposition method and employed as photoanode for PEC degradation of BPA. After laccase was facilely introduced into the PEC system, the BPA removal efficiency was significantly promoted, attributed to the synergistic effect of enzymatic catalysis and PEC processes. To obtain the optimum operation conditions, the effects of initial pH and applied bias potential were investigated systematically. Radicals trapping experiments revealed that •O₂^- dominated the biophotoelectrocatalytic degradation process, and the possible degradation pathway for BPA was proposed by identifying intermediates using liquid chromatography-mass spectrometry.

All Solution-Processed Inorganic, Multilevel Memristors Utilizing Liquid Metals Electrodes Suitable for Analog Computing

Herein, we report a solution-processable memristive device based on bismuth vanadate (BiVO₄) and titanium dioxide (TiO₂) with gallium-based eutectic gallium-indium (EGaIn) and gallium-indium-tin alloy (GaInSn) liquid metal as the top electrode. Scanning electron microscopy (SEM) shows the formation of a nonporous structure of BiVO₄ and TiO₂ for efficient resistive switching. Additionally, the gallium-based liquid metal (GLM)-contacted memristors exhibit stable memristor behavior over a wide temperature range from -10 to +90 °C. Gallium atoms in the liquid metal play an important role in the conductive filament formation as well as the device's operation stability as elucidated by I-V characteristics. The synaptic behavior of the GLM-memristors was characterized, with excellent long-term potentiation (LTP) and long-term depression (LTD) linearity. Using the performance of our device in a multilayer perceptron (MLP) network, a ∼90% accuracy in the handwriting recognition of modified national institute of standards and technology database (MNIST) was achieved. Our findings pave a path for solution-processed/GLM-based memristors which can be used in neuromorphic applications on flexible substrates in a harsh environment.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

The application of photoelectrocatalysis in the degradation of rhodamine B in aqueous solutions: a review

The pollution of the water environment by industrial effluents is an ongoing challenge due to the rate of industrialisation and globalisation. Photoelectrocatalysis (PEC), an electrochemical advanced oxidation process, has proven to be an effective method for removing organics from wastewater. Photoelectrocatalysis is environmentally benign, cost-effective and easy to operate. In this present review, we examine the recent progress in the removal of rhodamine B dye, a common constituent of textile effluent released into the environment, through photoelectrocatalytic degradation. We present a detailed discussion on the use of different kinds of unmodified and modified photoanodes that have been explored for the photoelectrocatalytic removal of this dye. More importantly, discussions are presented on the mechanisms and kinetics of the degradation of rhodamine B dye using these photoanodes. Hence, this review will be beneficial for researchers in developing future projects in the area of wastewater treatments through photoelectrocatalysis.

Boron doping positively enhances the catalytic activity of carbon materials for the removal of bisphenol A

Boron-doped carbon materials (BCs), low-cost and environmentally friendly carbocatalysts, were prepared for the activation of persulfate (PS) for the removal of bisphenol A (BPA). Compared with B-free carbon materials (Cs), the adsorption and catalytic activity were significantly enhanced by the boron modification. Fast and efficient removal of BPA was achieved using the BCs/PS system. The BPA removal rate constant increased linearly with the adsorption capacity of BCs. Electron paramagnetic resonance (EPR) spectroscopy and radical quenching experiments indicated that the degradation mechanisms in the BCs/PS system were different from conventional radical-based oxidation pathways. On the contrary, nonradical pathways were demonstrated to dominate the oxidation processes in the removal of BPA using the BCs/PS system. Herein, a mechanism is proposed where PS is activated by the carbon material to form a reactive electron-deficient carbocatalyst ([BCs]*) complex with a high redox potential, driving a nonradical oxidation pathway to achieve BPA removal. Through experimental investigation and the use of electrochemical techniques (cyclic voltammetry, Tafel corrosion analysis and open circuit voltages), B-doped carbon materials for the activation of PS elevate the potential of the derived nonradical [BCs]* complexes, and then accelerate the BPA removal efficiency via an electron transfer process. Utilizing adsorption and nonradical oxidation processes, the BCs/PS system possesses great potential for the removal of BPA in practical applications such as wastewater treatment.

Boron-doped carbon materials, based on coffee grounds, sodium bicarbonate and boric acid, were synthesized via a simple hydrothermal process. The ability of a boron-doped carbon material/persulfate system to remove bisphenol A was systematically studied.

Chlortetracycline degradation performance and mechanism in the self-biased bio-photoelectrochemical system constructed with an oxygen-defect-rich BiVO4/Ni9S8 photoanode

Efficient photoelectrodes are highly desired in bio-photoelectrochemical systems (BPES). Herein, in this paper, the oxygen defect-rich BiVO₄/Ni₉S₈ photoanode was developed and coupled with a biocathode for enhanced chlortertracycline (CTC) degradation and current generation in the self-biased BPES. Characterization results showed that the optimized BiVO₄/Ni₉S₈-7 mg-150 °C NF exhibited the best photocatalytic activity, due to that the rich oxygen vacancies and Ni₉S₈ could significantly improve light absorption, enhance photo-generated carriers separation, and accelerate charges transfer. CTC (20 mg L^-1) removal efficiency from the BPES was about 1.3 times (82.3% vs 64.7%) of that from the unilluminated reactor, and current output (0.68 A m^-3) was about 7.6 times (0.09 A m^-3). The dominant species in genus level was Geobacter, which is capable of reducing nitroaromatics and in favor of reductive dehalogenation of CTC. Besides, Comamonas and Rhodopseudomonas that are capable of degrading antibiotics were also detected. Possible degradation pathways and mechanism of CTC degradation in the BPES were proposed. This research advances the development of photoelectrode materials for light-driven BPESs and enriches antibiotics degradation mechanism.

Highly efficient removal of bisphenol A by a novel Co-doped LaFeO3 perovskite/PMS system in salinity water

Although it can effectively degrade refractory organic pollutants, advanced oxidation processes (AOPs) can be seriously interfered with the co-existing substance in salinity water. Herein, three-dimensional hierarchical cobalt-doped LaFeO₃ perovskites (LaCo_0.5Fe_0.5O₃) micron spheres composed of nano-rods were hydrothermally synthesized and applied to activate peroxymonosulfate (PMS) for degrading bisphenol A (BPA). Nearly 100% BPA was removed by LaCo_0.5Fe_0.5O₃/PMS system in presence of more than 50 mM Cl^- within only 2 min compared that of 30 min without Cl^-, which was attributed to reactive chlorine species (RCS) including Cl^• and HOCl with higher oxidation capacity. •OH and SO₄^•- produced by LaCo_0.5Fe_0.5O₃ activating PMS played crucial roles as the source of RCS in LaCo_0.5Fe_0.5O₃/Cl^-/PMS system. The synergistic effect between ROS and RCS promoted by the enhanced oxygen vacancies and the efficient redox recycling of Fe^III/Fe^II and Co^III/Co^II. Other anions like SO₄^2- and NO₃^- hardly affected the BPA degradation. BPA degradation efficiency was also improved either in a wide pH range or in the presence of natural organic matters in salty water. This work also demonstrated the potential application of FeCo bimetallic LaCo_0.5Fe_0.5O₃ activating PMS system for degradation of BPA or other organic micropollutants in seawater system.

Selective degradation of acetaminophen from hydrolyzed urine by peroxymonosulfate alone: performances and mechanisms

Owing to the high concentration of pharmaceuticals in urine, the degradation of these organic pollutants before their environmental release is highly desired. Peroxymonosulfate (PMS) is a desirable oxidant that can be applied to environmental remediation; however, the performance and mechanism of PMS for the degradation of pharmaceuticals in the urine matrix have not been investigated. Herein, PMS was first discovered to efficiently degrade typical pharmaceuticals in hydrolyzed urine (HU) by selecting acetaminophen (ACE) as a target compound. Quenching experiments revealed that singlet oxygen (1O2) and hydroxyl radicals (HO˙) were observed in the HU/PMS system, but the principal reactive species (RS) responsible for ACE removal was 1O2. The major constituents of HU, including SO4 2- and organics (creatine, creatinine and hippuric acid), hardly affected the elimination of ACE, whereas Cl-, H2PO4 - and NH4 + would accelerate ACE degradation. Besides, HCO3 - slightly inhibited this process. The ACE degradation efficiency was enhanced using photo-irradiation, including sunlight and visible light, although increasing the reaction temperature could, interestingly, hardly accelerate the degradation rate of ACE. Three-dimensional excitation-emission matrices (3D-EEMs) have indicated that other intermediates that have a higher fluorescence intensity might be generated in the HU/PMS system. Finally, nine intermediate products were determined and the degradation pathways of ACE were proposed. Overall, the results of this study illustrated that PMS is an efficient oxidant for the degradation of ACE in HU.

Persulfate enhanced photoelectrochemical oxidation of organic pollutants using self-doped TiO2nanotube arrays: Effect of operating parameters and water matrix

This study investigated the influence of adding peroxydisulfate (PDS) to a photoelectrocatalysis (PEC) system using self-doped TiO₂ nanotube arrays (bl-TNAs) for organic pollutant degradation. The addition of 1.0 mM PDS increased the bisphenol-A (BPA) removal efficiency of PEC (PEC/PDS) from 65.0% to 85.9% within 1 h. The enhancement could be attributed to the high formation yield of hydroxyl radicals (^·OH), increased charge separation, and assistance of the sulfate radicals (SO₄^·-). The PDS concentration and applied potential bias were influential operating parameters for the PEC/PDS system. In addition, the system exhibited a highly stable performance over a wide range of pH values and background inorganic and organic constituents, such as chloride ions, bicarbonate, and humic acid. Further, the degradation performance of the organic pollutant mixture, including BPA, 4-chlorophenol (4-CP), sulfamethoxazole (SMX), and carbamazepine (CBZ), was evaluated in 0.1 M (NH₄)₂SO₄ solution and real surface water. The degradation efficiency increased in the order of CBZ < SMX < 4-CP < BPA in the PEC and PEC/PDS systems with both water matrices. Compared with the PEC system, the PEC/PDS (1.0 mM) system showed a threefold higher pseudo first-order reaction rate constant for BPA among pollutant mixtures in surface water. This was attributed to enhanced ^·OH production and the selective nature of SO₄^·-. The pseudo first-order reaction rate constants of other pollutants, i.e., 4-CP, SMX, and CBZ increased ca. twofold in the PEC/PDS system. The results of this study showed that the PEC/PDS system with bl-TNAs is a viable technology for oxidative treatment.

A semi-covalent molecularly imprinted fluorescent sensor for highly specific recognition and optosensing of bisphenol A

A novel mesoporous fluorescent molecularly imprinted sensor for selective detection of bisphenol A (BPA) in food materials was fabricated via a semi-covalent imprinting method. The imprinting precursor that served as an alternative template molecule for BPA was prepared via thermally reversible isocyanate bonding, which effectively improved the imprinting efficiency for the molecularly imprinted sensor. Carbon dots (CDs) were embedded in mesoporous silica as signal recognition elements that exhibited quenching upon BPA binding. Subsequently, through the sol-gel process, the molecularly imprinted layer was coated on the CDs silica layer and provided specific recognition sites for BPA. The composite of CDs embedded in the mesoporous molecularly imprinted polymer (CDs@MIP) was characterized with scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and thermogravimetric analysis. The mechanism of carbon dots quenching and the high selectivity of CDs@MIP towards BPA were explored. The linear response range of the sensor was from 0.025 mg L^-1 to 2 mg L^-1 with a limit of detection of 0.016 mg L^-1. The method was successfully applied for the determination of food samples and recoveries ranged from 92.5% to 101.1%. The BPA contents in actual samples were determined using high performance liquid chromatography and the proposed sensor, showing no significant difference between the two methods.