Operation costs of the solar photo-catalytic degradation of pharmaceuticals in water: A mini-review

Solar photo-Fenton and persulphate-based processes for landfill leachate treatment: A critical review

Landfilling is the most usual solid waste management strategy for solid residues disposal. However, it entails several drawbacks such as the generation of landfill leachate that seriously threaten human life and the environment due to their toxicity and carcinogenic character. Among various technologies, solar photo-Fenton and sulphate-based processes have proven to be suitable for the treatment of these polluted streams. This review critically summarises the last three decades of studies in this field. It is found that the solar homogeneous photo-Fenton process should be preferably used as a pre- and post-treatment of biological technologies and as a standalone treatment for young, medium, and mature leachates, respectively. Studies on heterogeneous solar photo-Fenton process are lacking so that this technology may be scaled-up for industrial applications. Sulphate radicals are attractive for removing both COD and ammonia. However, no study has been reported on solar sulphate activation for landfill leachate treatment. This review discusses the main advances and challenges on treating landfill leachate through solar AOPs, it compares solar photo-Fenton and solar persulphate-based treatments, indicates the future research directions and contributes for a better understanding of these technologies towards sustainable treatment of landfill leachate in sunny and not-so-sunny regions.

Efficient Photocatalytic Luminous Textile for Simulated Real Water Purification: Advancing Economical and Compact Reactors

The growing worldwide problem of wastewater management needs sustainable methods for conserving water supplies while addressing environmental and economic considerations. With the depletion of freshwater supplies, wastewater treatment has become critical. An effective solution is needed to efficiently treat the organic contaminants departing from wastewater treatment plants (WWTPs). Photocatalysis appears to be a viable method for eliminating these recalcitrant micropollutants. This study is focused on the degradation of Reactive Black 5 (RB5), a typical contaminant from textile waste, using a photocatalytic method. Titanium dioxide (TiO2) was deposited on a novel luminous fabric and illuminated using a light-emitting diode (LED). The pollutant degrading efficiency was evaluated for two different light sources: (i) a UV lamp as an external light source and (ii) a cold LED. Interestingly, the LED UV source design showed more promising results after thorough testing at various light levels. In fact, we note a 50% increase in mineralization rate when we triple the number of luminous tissues in the same volume of reactor, which showed a clear improvement with an increase in compactness.

Synthesis of an efficient MOF catalyst for the degradation of OPDs using TPA derived from PET waste bottles

In this study, a method for degrading PET-waste plastic bottles using ZnCl2:Urea as a catalyst was developed, resulting in high conversion (87%). The terephthalic acid obtained from the degradation of Waste PET Bottles (WPTs) was combined with copper and zinc salts to synthesize bimetallic metal-organic frameworks (MOF). The effectiveness of a bimetallic Cu-Zn(BDC)-MOF in catalyzing the reduction reaction of organic pollutant dyes (OPDs) was investigated, and the degradation efficiency of individual dyes was optimized, achieving over 95% degradation within 6-12 min under optimal conditions. Various techniques, including FT-IR, XRD, FE-SEM, EDS, and TEM were used to characterize the synthesized MOF. Results showed that the catalytic activity of Cu-Zn-MOF in reduction reaction of OPDs was enhanced by increasing the copper content. The reaction kinetics were investigated following pseudo-first-order kinetics with rate constants of 0.581, 0.43, 0.37, and 0.30 min-1 for Methylene Blue (MB), Methyl Orange (MO), 4-Nitrophenol (4-NP), and 4-Nitroaniline (4-NA), respectively. The investigations revealed that the produced catalyst exhibited excellent stability and recoverability, while its activity remained well-preserved even after undergoing three reuse cycles.

Ibuprofen Adsorption on Activated Carbon: Thermodynamic and Kinetic Investigation via the Adsorption Dynamic Intraparticle Model (ADIM)

The adsorption efficiency of commercial activated carbon toward ibuprofen (IBU) was investigated and described using the adsorption dynamic intraparticle model (ADIM). Although the adsorption capacity of activated carbon has been widely studied, the kinetic models used in the literature are simplified, treating adsorption kinetics with pseudo-kinetic approaches. In this paper, a realistic model is proposed, quantitatively describing the influence of the main operation parameters on the adsorption kinetics and thermodynamics. The thermodynamic data were interpreted successfully with the Freundlich isotherm, deriving an endothermic adsorption mechanism. The system was found to be dominated by the intraparticle diffusion regime, and the collected data allowed the determination of the surface activation energy (ES = 60 ± 7 kJ/mol) and the fluid-solid apparent activation energy (EA = 6 ± 1 kJ/mol). The obtained parameters will be used to design adsorption columns, allowing the scale-up of the process.

Current research trends on emerging contaminants pharmaceutical and personal care products (PPCPs): A comprehensive review

Pharmaceutical and personnel care products (PPCPs) from wastewater are a potential hazard to the human health and wildlife, and their occurrence in wastewater has caught the concern of researchers recently. To deal with PPCPs, various treatment technologies have been evolved such as physical, biological, and chemical methods. Nevertheless, modern and efficient techniques such as advance oxidation processes (AOPs) demand expensive chemicals and energy, which ultimately leads to a high treatment cost. Therefore, integration of chemical techniques with biological processes has been recently suggested to decrease the expenses. Furthermore, combining ozonation with activated carbon (AC) can significantly enhance the removal efficiency. There are some other emerging technologies of lower operational cost like photo-Fenton method and solar radiation-based methods as well as constructed wetland, which are promising. However, feasibility and practicality in pilot-scale have not been estimated for most of these advanced treatment technologies. In this context, the present review work explores the treatment of emerging PPCPs in wastewater, via available conventional, non-conventional, and integrated technologies. Furthermore, this work focused on the state-of-art technologies via an extensive literature search, highlights the limitations and challenges of the prevailing commercial technologies. Finally, this work provides a brief discussion and offers future research directions on technologies needed for treatment of wastewater containing PPCPs, accompanied by techno-economic feasibility assessment.

TiO2 based Photocatalysis membranes: An efficient strategy for pharmaceutical mineralization

Among the various emerging contaminants, pharmaceuticals (PhACs) seem to have adverse effects on the quality of water. Even the smallest concentration of PhACs in ground water and drinking water is harmful to humans and aquatic species. Among all the deaths reported due to COVID-19, the mortality rate was higher for those patients who consumed antibiotics. Consequently, PhAC in water is a serious concern and their removal needs immediate attention. This study has focused on the PhACs' degradation by collaborating photocatalysis with membrane filtration. TiO₂-based photocatalytic membrane is an innovative strategy which demonstrates mineralization of PhACs as a safer option. To highlight the same, an emphasis on the preparation and reinforcing properties of TiO₂-based nanomembranes has been elaborated in this review. Further, mineralization of antibiotics or cytostatic compounds and their degradation mechanisms is also highlighted using TiO₂ assisted membrane photocatalysis. Experimental reactor configurations have been discussed for commercial implementation of photoreactors for PhAC degradation anchored photocatalytic nanomembranes. Challenges and future perspectives are emphasized in order to design a nanomembrane based prototype in future for wastewater management.

UV/solar photo-degradation of furaltadone in homogeneous and heterogeneous phases: Intensification with persulfate

Previous studies on removal of the pharmaceutical drug Furaltadone (FTD) in water have not shown to be totally efficient or are very expensive. In this study, sulfate radicals derived from persulfate anions activated with different irradiation sources (UVA, UVC and solar light) and combined with H₂O₂ and/or TiO₂ have been tested in homogeneous and heterogeneous phases under different operation modes and reaction systems. In homogeneous phase, UV produces a slow mineralization (k = 0.0013 min^-1). The combined processes are faster (k_UV/H2O2 = 0.0185 min^-1, k_UV/PS = 0.0206 min^-1) with the best performance for the UV/PS system yielding nearly 80% of mineralization in half an hour. The overall process (UV/H₂O₂/PS) does not show synergy and mineralization is even slower (k_UV/H2O2/PS = 0.015 min^-1) due to the production of a high amount of radicals favouring unproductive reactions (scavenger effect). A mineralization mechanism is proposed involving formation of 5hydroxymethylene-2(5H)-furanone and NO as the main intermediates. In heterogeneous phase (UVA/TiO₂/PS), the holes play an important role changing the mineralization mechanism. The main intermediates formed were C₁₂H₁₇N₄O₄ and C₁₁H₁₄N₃O₄, which rapidly were degraded to form C₈H₁₅O₃N₃, C₄H₁₀NO and C₅H₁₀NO. An economic study of operation costs has been made for selected processes: UVC/PS, UVA/TiO₂/PS and Solar/TiO₂/PS. The Solar/TiO₂/PS process has the lowest operation costs due to the use of solar energy. However, it would need an additional stage to recover the catalyst. Finally, a loss of 27% in efficiency during mineralization was found after 5 cycles, but the catalyst recovers its initial performance after regeneration at 500 °C.

Degradation of Diazepam with Gamma Radiation, High Frequency Ultrasound and UV Radiation Intensified with H2O2 and Fenton Reagent

A degradation study of diazepam (DZP) in aqueous media by gamma radiation, high frequency ultrasound, and UV radiation (artificial-solar), as well with each process intensified with oxidizing agents (H2O2 and Fenton reagent) was performed. The parameters that influence the degradation of diazepam such as potency and frequency, irradiation dose, pH and concentration of the oxidizing agents used were studied. Gamma radiation was performed in a 60Co source irradiator; an 11 W lamp was used for artificial UV radiation, and sonification was performed at frequency values of 580 and 862 kHz with varying power values. In the radiolysis a 100% degradation was obtained at 2500 Gy. For the sonolysis, 28.3% degradation was achieved after 180 min at 862 kHz frequency and 30 W power. In artificial photolysis, a 38.2% degradation was obtained after 300 min of UV exposure. The intensification of each process with H2O2 increased the degradation of the drug. However, the best results were obtained by combining the processes with the Fenton reagent for optimum H2O2 and Fe2+ concentrations, respectively, of 2.95 mmol L−1 and of 0.06 mmol L−1, achieving a 100% degradation in a shorter treatment time, with a dose value of 750 Gy in the case of gamma radiation thanks to increasing in the amount of free radicals in water. The optimized processes were evaluated in a real wastewater, with a total degradation at 10 min of reaction.

Treatment of Textile Wastewater Using Advanced Oxidation Processes—A Critical Review

Textile manufacturing is a multi-stage operation process that produces significant amounts of highly toxic wastewater. Given the size of the global textile market and its environmental impact, the development of effective, economical, and easy-to handle alternative treatment technologies for textile wastewater is of significant interest. Based on the analysis of peer-reviewed publications over the last two decades, this paper provides a comprehensive review of advanced oxidation processes (AOPs) on textile wastewater treatment, including their performances, mechanisms, advantages, disadvantages, influencing factors, and electrical energy per order (EEO) requirements. Fenton-based AOPs show the lowest median EEO value of 0.98 kWh m−3 order−1, followed by photochemical (3.20 kWh m−3 order−1), ozonation (3.34 kWh m−3 order−1), electrochemical (29.5 kWh m−3 order−1), photocatalysis (91 kWh m−3 order−1), and ultrasound (971.45 kWh m−3 order−1). The Fenton process can treat textile effluent at the lowest possible cost due to the minimal energy input and low reagent cost, while Ultrasound-based AOPs show the lowest electrical efficiency due to the high energy consumption. Further, to explore the applicability of these methods, available results from a full-scale implementation of the enhanced Fenton technology at a textile mill wastewater treatment plant (WWTP) are discussed. The WWTP operates at an estimated cost of CNY ¥1.62 m−3 (USD $0.23 m−3) with effluent meeting the China Grade I-A pollutant discharge standard for municipal WWTPs, indicating that the enhanced Fenton technology is efficient and cost-effective in industrial treatment for textile effluent.

Organobeidellites for Removal of Anti-Inflammatory Drugs from Aqueous Solutions

Diclofenac (DC) and ibuprofen (IBU) are widely prescribed non-steroidal anti-inflammatory drugs, the consumption of which has rapidly increased in recent years. The biodegradability of pharmaceuticals is negligible and their removal efficiency by wastewater treatment is very low. Therefore, the beidelitte (BEI) as unique nanomaterial was modified by the following different surfactants: cetylpyridinium (CP), benzalkonium (BA) and tetradecyltrimethylammonium (TD) bromides. Organobeidellites were tested as potential nanosorbents for analgesics. The organobeidellites were characterized using X-ray powder diffraction (XRD), Infrared spectroscopy (IR), Thermogravimetry and differential thermal analysis (TG/DTA) and scanning microscopy (SEM). The equilibrium concentrations of analgesics in solution were determined using UV-VIS spectroscopy. The intercalation of surfactants into BEI structure was confirmed both using XRD analysis due to an increase in basal spacing from 1.53 to 2.01 nm for BEI_BA and IR by decreasing in the intensities of bands related to the adsorbed water. SEM proved successful in the uploading of surfactants by a rougher and eroded organobeidellite surface. TG/DTA evaluated the decrease in dehydration/dehydroxylation temperatures due to higher hydrophobicity. The Sorption experiments demonstrated a sufficient sorption ability for IBU (55–86%) and an excellent ability for DC (over 90%). The maximum adsorption capacity was found for BEI_BA-DC (49.02 mg·g⁻¹). The adsorption according to surfactant type follows the order BEI_BA > BEI_TD > BEI_CP.

A Review on the Application of Zeolites and Mesoporous Silica Materials in the Removal of Non-Steroidal Anti-Inflammatory Drugs and Antibiotics from Water

Zeolites and mesoporous silica materials are effective adsorbents that can be useful for the removal of various pharmaceuticals including non-steroidal anti-inflammatory drugs and antibiotics from low-quality water. This paper summarizes the properties and basic characteristics of zeolites and mesoporous silica materials and reviews the recent studies on the efficacy of the adsorption of selected non-steroidal medicinal products and antibiotics by these adsorbents to assess the potential opportunities and challenges of using them in water treatment. It was found that the adsorption capacity of sorbents with high silica content is related to their surface hydrophobicity (hydrophilicity) and structural features, such as micropore volume and pore size, as well as the properties of the studied medicinal products. This review can be of help to scientists to develop an effective strategy for reducing the amount of these two groups of pharmaceuticals in wastewater.

Nano and micro architectured cues as smart materials to mitigate recalcitrant pharmaceutical pollutants from wastewater

Pharmaceuticals have been recognized for saving billions of lives, but they also appear as a novel group of environmental pollutants. The presence of pharmaceutically active residues in seawater, surface water, wastewater treatment plants, sludges, and soils has been widely reported. Their persistence in the environment for extended durations exerts various adverse consequences, such as gene toxicity, hormonal interference, antibiotic resistance, sex organs imposition, and many others. Various methodologies have been envisioned for their removal from the aqueous media. Different processes have been restricted due to high cost, inefficient removal, generation of toxic materials, and high capital requirement. The employment of nanostructured materials to mitigate pharmaceutical contaminants has been increasing during the last decades. The adsorptive nanomaterials have a high surface area, low cost, eco-friendliness, and high affinity for inorganic and organic molecules. In this review, we have documented the rising concerns of environmental pharmaceutical contamination and their remediation by applications of nanomaterials. Nanomaterials could be a robust candidate for the removal of an array of environmental contaminants in water.

Degradation of fluoroquinolones in homogeneous and heterogeneous photo-Fenton processes: A review

Fluoroquinolone antibiotics are frequently detected in the environment causing potential hazards to ecological and human health. Inadequate removal efficiencies were reported for fluoroquinolones during conventional wastewater treatment processes whereas the application of photo-Fenton reactions has attracted much attention due to their high reaction rate. This article summarizes the recent proceedings on homogeneous and heterogeneous photo-Fenton degradation of fluoroquinolones. Degradation efficiencies of fluoroquinolones were discussed as well as rate constants for a distinct comparison. The influences of initial fluoroquinolone concentration, H₂O₂, Fe²⁺, pH and temperature were also investigated on homogeneous photo-Fenton degradation of fluoroquinolones. The currently applied heterogenous catalysts were considered including iron oxides catalysts, iron-based composite catalysts and iron-based semiconductor. In addition, the degradation pathways for typical fluoroquinolones were proposed with the products identified in the literature. The results indicated the better performance with the aid of heterogeneous catalysts due to the generation of more active species. Intermediate products at smaller molecular weight were obtained through various types of pathways under heterogeneous photo-Fenton degradation of fluoroquinolones, implying a practical application with biological treatment processes for fully mineralization.

An overview of homogeneous and heterogeneous photocatalysis applications for the removal of pharmaceutical compounds from real or synthetic hospital wastewaters under lab or pilot scale

The last few decades, Pharmaceutical Active Compounds (PhACs) have been considered as emerging contaminants due to their continuous release and persistence to aquatic environment even at low concentrations. A growing number of research articles have shown the occurrence of numerous PhACs in various wastewater treatment plant influents, hospital effluents, and surface waters all over the world. The rising concern regarding PhACs, which present high recalcitrance towards conventional treatment methods, has provoked extensive research in the field of their effective remediation. This review provides a comprehensive assessment of homogeneous and heterogeneous photocatalytic applications for the removal of PhACs, from real or artificial hospital wastewater effluents. These two representative advanced oxidation processes (AOPs) are assessed in terms of their efficiency to remove PhACs, reduce the COD and toxicity as well as increase the biodegradability of the effluent. Simultaneously with their efficiency the operational costs of the processes are considered. Their potential combination with other processes is critically discussed, as this option seems to enhance the treatment efficiency and simultaneously overcome the limitations of each individual process. Moreover, the type of reactors as well as the main parameters that should be considered for the design and the development of photoreactors for wastewater treatment are reviewed. Finally, based on the literature survey, indications for future work are provided.

Effective removal of paracetamol in compound parabolic collectors and fixed bed reactors under natural sunlight

Removal of persistent organic pollutants from water is quite challenging using biological treatment processes in waste water treatment plants. In order to improve the wastewater treatment quality for water reuse, many techniques are developed and the most commonly used is heterogeneous photocatalysis. This work studies the degradation of paracetamol (PAR), which is one of the most persistent pharmaceutical drugs in water, and widely used as an analgesic and antipyretic drug in Algeria. The paracetamol degradation has been carried out via heterogeneous photocatalysis, in a suspended solution of catalyst using a Compound Parabolic Collectors (CPC) reactor and in a fixed bed with immobilized catalyst under natural solar radiation. The degradation performance has been studied under various parameters such as substrate concentration and pH of solution. The degradation efficiency decreased when the initial paracetamol concentration increased from 2.5 mg/L to 20 mg/L. In addition, the selected reactors were found to be competent for the paracetamol degradation with an almost 98-99% removal of PAR. For the CPC reactor with suspended TiO₂, the paracetamol elimination reached 98% after 300 min; however, for the fixed-bed reactor, TiO₂ immobilized on cellulose-based paper was utilized, which yielded an almost 99% reduction in the PAR concentration after 90 min only of solar irradiation.

A novel photocatalytic reactor for the extended reuse of W-TiO2 in the degradation of sulfamethazine

In this study, a photocatalytic reactor with a novel engineering design has been used for the extended degradation of sulfamethazine (SMZ). The reactor employed four consecutive stainless-steel plates immobilized by tungsten-dope TiO₂ (W-TiO₂) using polysiloxane. The characterization of W-TiO₂ by X-ray diffraction (XRD), Raman spectroscopy, and energy-dispersive X-ray (EDX) denoted successful doping of tungsten in the lattice of anatase crystals of TiO₂ suggesting a high photocatalytic activity under UV and visible light. A Box-Behnken experimental design was employed for the optimization of the operating parameters such as solution pH, flow rate, and the initial SMZ concentration. The residual SMZ concentration was below the detection limit after 30 min of the photocatalytic reaction under the optimum operating conditions. A highly remarkable degradation of SMZ was observed in five consecutive cycles, which reveals an extended stable photocatalytic activity offered by the reactor design. The transformation products were identified by tandem mass spectrometry, and they were employed to propose the degradation pathway. These results highlight the importance of using the photocatalysts in retained forms and open additional avenues for the practical application of photocatalysis in wastewater treatment.

Combination of solar photo-Fenton and adsorption process for removal of the anticancer drug Flutamide and its transformation products from hospital wastewater

The anti-cancer drug Flutamide (FLUT) is widely used and is of great environmental concern. The solar photo-Fenton (SPF) process can be an effective treatment for the removal of this type of micropollutant. The use of a single addition of 5 mg L^-1 of Fe²⁺ and 50 mg L^-1 of H₂O₂ achieved 20% primary degradation and only 3.05% mineralization. By using three additions of 5 mg L^-1 Fe²⁺, with an initial H₂O₂ concentration of 150 mg L^-1, 58% primary degradation was achieved, together with 12.07% mineralization. Consequently, thirteen transformation products (TPs) were formed. The SPF process was further combined with adsorption onto avocado seed activated carbon (ASAC) as an environmentally friendly approach for the removal of remained FLUT and the TPs. Doehlert design was used to assess the behavior of 13 TPs by optimizing the contact time and the adsorbent mass load. The optimal conditions for removal of FLUT and the TPs were 14 mg of ASAC and a contact time of 40 min. Remained FLUT and the TPs were totally removed using the adsorption process. The mechanisms of adsorption of FLUT and the TPs were strongly influenced by their polarity and π-π interactions of the TPs onto ASAC.

Water Depollution and Photo-Detoxification by Means of TiO2: Fluoroquinolone Antibiotics as a Case Study

Photocatalysis by semiconductors is considered one of the most promising advanced oxidation processes (AOPs) and TiO2 is the most well-studied material for the removal of contaminants from the aquatic system. Over the last 20 years, pharmaceuticals have been the most investigated pollutants. They re-enter the environment almost unmodified or slightly metabolized, especially in the aquatic environment, since the traditional urban wastewater treatment plants (WWTPs) are not able to abate them. Due to their continuous input, persistence in the environment, and unpleasant effects even at low concentrations, drugs are considered contaminants of emerging concern (ECs). Among these, we chose fluoroquinolone (FQ) antibiotics as an environmental probe for assessing the role of TiO2 photocatalysis in the degradation of recalcitrant pollutants under environmental conditions and detoxification of surface waters and wastewaters. Due to their widespread diffusion, their presence in the list of the most persistent pollutants, and because they have been deeply investigated and their multiform photochemistry is well-known, they are able to supply rich information, both chemical and toxicological, on all key steps of the oxidative degradation process. The present review article explores, in a non-exhaustive way, the relationship among pollution, toxicity and remediation through titanium dioxide photocatalysis, with particular attention to the toxicological aspect. By using FQs as the probe, in depth indications about the different phases of the process were obtained, and the results reported in this paper may be useful in the improvement of large-scale applications of this technology, and—through generally valid methods—they could be deployed to other pharmaceuticals and emerging recalcitrant contaminants.

Degradation behaviors of naproxen by a hybrid TiO2 photocatalyst system with process components

A hybrid system combining microwave and a microwave discharge electrodeless lamp (MDEL) was proposed to overcome the limitations of conventional TiO₂ photocatalysts. The degradation efficiency and mechanism of naproxen were determined using a series of single processes, including conventional TiO₂ photocatalyst reactors and a hybrid system that fuses them. Although the degradation efficiency tended to increase after changing the experimental condition of a single process, the optimal conditions existed for these experimental conditions. On the other hand, remarkable synergy was observed in the fused process, whose efficiency was significantly higher than that of the unit process. In particular, the optimal degradation ability was obtained by adding hydrogen peroxide together with microwave irradiation. The seven intermediates in the proposed photocatalytic degradation pathway were generated by the demethylation and hydroxylation by hydroxyl radicals. These results are expected to provide new data on the design of high efficiency photocatalytic systems at low cost.

Treatment of a synthetic colored effluent in raceway reactors: The role of operational conditions on the environmental performance of a photo-Fenton process

This study assessed the environmental and economic performance of a photo-Fenton process in a raceway reactor at laboratory scale. For the best operational condition (BOC) identified (dye = 55.0 mg/L, H₂O₂/dye = 0.862 mg/L, Fe²⁺/dye = 0.184) a carbon footprint (CFP) of 1.335 kg CO₂ Eqv/m³ was obtained. Consumption of electrical energy, construction materials, and reagents represent 97.2% (1.298 kg CO₂ Eqv/m³) of the CFP. Similarly, ReCiPe-2016 v1.1 evidenced that these activities play an important role on the environmental performance of the process because their relative impact ranged from 96.5% to 99.7% at least in 14 of the 18 categories considered by this method. It should be noted that the CFP is scarcely sensitive to variations in the use of cement, steel, H₂O₂, and NaOH as a 50.0% increase in their expenditure increases the CFP in 4.4%, 5.0%, 5.9%, and 7.2%, respectively. A 50.0% increment in electricity consumption increased the CFP in 20.7% whereas categories related to acidification, eutrophication, resources depletion, and toxicity-related impacts had significant increments (20.0%-34.0%) in the emissions of substances used for impact characterization. BOC led to the lowest treatment cost (US$0.540/m³) and a CFP between 5- and 10-times lower than that reported for solar tubular reactors. Also, higher proportions of H₂O₂ (H₂O₂/dye = 1.200-1.800) and Fe²⁺ (Fe²⁺/dye = 0.200-0.300) increased cost in 1.9%-5.6% but reduced the CFP in 1.2%-3.7%. Finally, our results evidenced that it is possible to increase the raceway reactor's capacity by increasing the depth of the reactor without affecting the effluent quality. When the depth of the reaction medium went from 3 cm to 6 cm, the treatment capacity (TC) was increased 102.4%, and a 33.3% diminution in the CFP and of 29.1% in the treatment cost occurred. An increase from 3 cm to 9 cm rose the TC up to 204.4% and reduced the CFP (44.4%) and treatment cost (39.3%).

Solar photo-degradation of aniline with rGO/TiO2 composites and persulfate

The solar photodegradation of aniline using reduced graphene oxide-based composites (rGO/TiO₂) and different electron acceptors such as H₂O₂ and persulfate (PS) has been studied. To this end, an innovative self-sufficient drum reactor (operating with solar irradiation and artificial UV light) has been employed. The role of radicals and the new graphene morphology is evaluated. Finally, changes in the degradation/mineralization mechanism are explained according to intermediates evolution (obtained from mass spectroscopy). In the Solar/rGO/TiO₂/H₂O₂ system, hydroxyl radicals react with the reduced graphene oxide (rGO) producing oxidized rGO (OrGO). The process creates new pores increasing surface area favouring adsorption. Also, other radicals such as superoxide or singlet oxygen are also formed, affecting the degradation mechanism. The hole reacts with adsorbed aniline to form the aniline-radical-cation. Nitrosobenzene is then formed with the active participation of superoxide radical anion, finally yielding azobenzene. It was found that the addition of 2.5% wt of rGO increases mineralization from 0 to 14% during the solar stage after 120 min, reaching 82.5% when lamps are switched on after 240 min. On the other hand, activation of PS with UV-C light is a very efficient process, since aniline is wholly degraded in 10-20 min depending on PS initial concentration, reaching a high mineralization degree close to 90% in 120 min. During this process, degradation occurs in a very different route, via the formation of phenol. In the first stage (t < 25 min), sulfate radical is the primary oxidant involved to yield benzoquinone. In a second step (t > 25 min), hydroxyl radicals play the leading role to reach C₂-C₆ organic acids.

Photocatalytic Degradation of Selected Pharmaceuticals Using g-C3N4 and TiO2 Nanomaterials

Exfoliated graphitic carbon nitride (g-C₃N₄) and two commercially available nanomaterials from titanium dioxide (P25 and CG300) were tested for the photocatalytic degradation of paracetamol (PAR), ibuprofen (IBU), and diclofenac (DIC). Prior to photocatalytic experiments, the nanomaterials were characterized by common methods, such as X-ray diffraction (XRD), UV–VIS diffuse reflectance spectroscopy (DRS), Fourier transformed infrared spectroscopy in attenuated total reflection mode (FTIR–ATR), transmission electron microscopy (TEM), physisorption of nitrogen, and dynamic vapor adsorption (DVS) of water. The sizes and specific surface area (SSA) of the TiO₂ nanoparticles were 6 nm and 300 m²·g⁻¹ for CG300 and 21 nm and 50 m²·g⁻¹ for P25. The SSA of g-C₃N₄ was 140 m²·g⁻¹. All photocatalytic experiments were performed under UV (368 nm), as well as VIS (446 nm) irradiation. TiO₂ P25 was the most active photocatalyst under UV irradiation and g-C₃N₄ was the most active one under VIS irradiation. Photodegradation yields were evaluated by means of high performance liquid chromatography (HPLC) and reaction intermediates were identified using gas chromatography with mass detection (GC–MS). Paracetamol and ibuprofen were totally removed but the intermediates of diclofenac were observed even after 6 h of irradiation. Some intermediates, such as carbazole-1-acetic acid, 2,6-dichloraniline, and hydroxylated derivates of diclofenac were identified. This study showed that g-C₃N₄ is a promising photocatalyst for the degradation of pharmaceuticals in an aqueous environment, under visible light.

17-β-Estradiol: Significant reduction of its toxicity in water treated by photocatalysis

The aim of this study was to assess the efficiency of photocatalysis by TiO₂ on the removal of 17-β-estradiol (E2) (at environmentally relevant concentrations) and the toxicity caused by this emerging pollutant. After 60min of TiO₂/UV treatment at pilot scale (14L), E2 was removed from water approximately 85%. The toxicity was established by using Cyprinus carpio as bioindicator organism and oxidative stress biomarkers (OSB): [lipid peroxidation level (LPX), hydroperoxide content (HPC) and protein carbonyl content (PCC)] and enzymes [superoxide dismutase (SOD) and catalase (CAT)]. It was found that the photocatalytic treatment led to significantly reduce OSB in approximately 85-95%. Thus, it can be concluded that heterogeneous photocatalysis by TiO₂ is an efficient process to eliminate the toxicity caused by E2 and thus to remediate water polluted with this molecule.

Degradation of pharmaceuticals in different water matrices by a solar homo/heterogeneous photo-Fenton process over modified alginate spheres

A solar homo/heterogeneous photo-Fenton process using five materials (Fe(II), Fe(III), mining waste, Fe(II)/mining waste, and Fe(III)/mining waste) supported on sodium alginate was used as a strategy to iron dosage for the degradation of eight pharmaceuticals in three different water matrices (distilled water, simulated wastewater, and hospital wastewater). Experiments were carried out in a photoreactor with a capacity of 1 L, using 3 g of iron-alginate spheres and an initial hydrogen peroxide concentration of 25 mg L^-1, at pH 5.0. All the materials prepared were characterized by different techniques. The Fe(III)-alginate spheres presented the best pharmaceutical degradation after a treatment time of 116 min. Nineteen transformation products generated during the solar photo-Fenton process were identified by liquid chromatography coupled to quadrupole time-of-flight mass spectrometry, using a purpose-built database developed for detecting these transformation products. Finally, the transformation products identified were classified according to their toxicity and predicted biodegradability.